Transient Conduction Research Articles

Anomalous transient conductivity of magnetic elastomer under the action of strain and magnetic field

Abstract Magnetoactive (aka magnetorheological) elastomer composites, which are elastic polymer matrices filled with micron-sized particles of a ferromagnet, are a novel type of magnetically controllable material. In addition to their complex magnetomechanical behavior, magnetoactive elastomers, as conducting substances, possess electrical resistivity that is highly sensitive to both mechanical stress and the applied magnetic field. Here, we present a study on the response of such composites to pulse mechanical or magnetic perturbations. Remarkably, a transient electric process induced by any of those stimuli is always non-monotonic. The electric current measurements reveal that before settling at the new equilibrium level, the resistivity always undergoes a substantial jump-up independently on the sign of the perturbation: a pressure on/off or the field on/off. The main goal of the work is to register the encountered effect in detail.

Analytical modelling of transient conduction heat transfer in tubes for industrial applications

Analytical modelling of transient conduction heat transfer in tubes for industrial applications

Simulation of freezing in existence of nanomaterial involving transient conduction mechanism

An innovative approach to optimizing cold storage in elliptic containers has been pioneered by integrating tree-shaped fins and diverse nanoparticle shapes into the water. The use of a finite element method, deliberately excluding the velocity term, distinguishes this work and allows for a focused exploration of the efficacy of these elements on the unsteady freezing. Addressing a research gap in the understanding of such processes within elliptic containers, especially in conjunction with tree-shaped fins, a holistic approach is taken compared to prior publications. The increase in “m" correlates with a significant 6.98 % decrease in the freezing period, reducing the process time from 335s to 245.23s with the inclusion of nano-powders. The outputs showed that incorporating powders decline the freezing time about 26.79 %.

The Method of Calculating the Heat Transfer Coefficient in the Heliosystems with Laminar and Transient Modes of Heat Carrier Flow Movement Structured Into Parts

In this study, a new method of choosing classical empirical equations for calculating heat transfer coefficients in the tubes of a shell-and-tube heat exchanger in the transient mode is proposed. This method is based on the fact that the flow is structured into a laminar boundary layer (LBL) zone and a turbulized part, and the heat transfer coefficient is calculated through the transient and turbulent heat conductivity, as well as the average thickness of the LBL and, accordingly, the average thickness of the rest of the coolant flow. At the same time, the key point of this method is the condition that the transient thermal conductivity of the LBL should be lower than the thermal conductivity of the turbulized part. If this condition is not fulfilled, it is concluded that the corresponding classical empirical equation is not suitable for calculating the heat transfer coefficient. A 45% aqueous solution of propylene glycol was taken as a model liquid, which can be widely used in solar collectors, in particular with nanofillers. This coolant is interesting because at a constant speed of V = 0.93 m/s, and the linear size (diameter) of the "live section" of the flow D = 0.021 m in the temperature range of 243–273 K it moves in the laminar mode, in the temperature range of 283–323 K — in transient mode and 333–353 K — in turbulent mode. A new formula is proposed for calculating the coefficient of turbulence of the coolant flow a, the numerical values of which are experimentally found in literary sources only for the air coolant.

Analysis of transient heat conduction in tubes under convective boundary conditions

AbstractIn this work, six analytical solutions are given to estimate the energy exchange by transient conduction in pipes with convection conditions. The developed models were adjusted for an interval from 0.2 to 0.8, dimensionless Fourier (Fo) and Biot (Bi) numbers, from 0.05 to 50 and 0.005 to 50, respectively. In each case, 616 tests of temperature distributions were computed using the Heisler approximate method (HAM) and the exact models proposed, for different combinations of . For the comparison made between the analytical solutions and the HAM, 3696 tests were used, detecting that the HAM correlates with the analytical method with an average deviation of and for 71.2%, and 90.4% of the different values of combinations evaluated. The best fit was found for Case 5, with a mean deviation of and for 81.1% and 92.3% of the data used, respectively, while the weaker fit was detected for Case 2, with a mean deviation of and for 67.9% and 88.2% of the available tests.

Development of a transient analysis code for trans-critical simulation of SCWR

Supercritical water-cooled reactors (SCWR) experience pressure reductions below the critical point during a loss of coolant accident (LOCA). During the reactor depressurization, boiling crises may occur, leading to pressure fluctuations and significant increases in wall temperatures, posing a severe threat to the cladding. In this study, a one-dimensional transient analysis code has been developed to incorporate one-dimensional steady-state flow equations in the fluid domain and transient thermal conductivity equations in the solid domain. The code also includes a wall heat transfer model and a model for the velocity of the moving quench front to simulate transcritical depressurization transient processes. The simulation successfully predicts the typical experimental phenomena. It is reasonable to use the critical temperature as the demarcation point between the dry and wet conditions of the axial wall of the rod bundle under transcritical conditions. By combining the experimental data with the program calculations, the critical interface for the occurrence of boiling crisis under transcritical conditions is determined using mass flow rate, heat flow density and fluid temperature as inputs. The criterion for the occurrence of CHF under transcritical conditions is obtained, which provides a reference to the safety analysis of SCWRs.

Thermally Induced Moisture Flow in a Silty Sand under a 1-D Thermal Gradient

Thermally induced moisture flow in unsaturated soils involves complex coupled thermal–hydro processes with the moisture flow in both the vapor and liquid phases. The accurate measurement of the moisture flow in unsaturated sands remains a challenging task due to low moisture migration, the temperature effect on moisture sensors, and the gravity effect on moisture flow. This study aims to accurately measure transient moisture flow, heat transfer, and thermal conductivity in a silty sand with 35% non-plastic fines in a closed heat cell with a controlled 1-D temperature gradient. The heat cell consists of two temperature-controlled heat exchanger plates, heat flux sensors, moisture sensors, thermocouples, and thermal conductivity sensors. The soil moisture sensors were calibrated in the test soil at room temperature and then at elevated incremental temperatures. Soil samples compacted at various initial moisture contents were tested under a constant 1-D temperature gradient of 4 °C/cm. Soil moisture redistribution, temperature, and thermal conductivity profiles were determined from the test results. Transient temperature responses indicated that a lower initial moisture content led to a higher temperature drop after reaching the peak, or a more concaved temperature profile in a steady state due to enhanced moisture migration driven by the temperature gradients. Dry soils exhibited uniform thermal properties, while moist soils showed varying thermal conductivity profiles. A critical moisture content was identified when the maximum moisture migration occurred. Thermal conductivity in soils increased with the distance from the heat source due to thermally induced moisture migration. These findings provide valuable insights into coupled moisture–heat flow dynamics in unsaturated sands.

Transient Atrioventricular Conduction Disturbance During Vein of Marshall Alcohol Ablation

Transient Atrioventricular Conduction Disturbance During Vein of Marshall Alcohol Ablation

Effects of transient, persistent, and resurgent sodium currents on excitability and spike regularity in vestibular ganglion neurons.

Vestibular afferent neurons occur as two populations with differences in spike timing regularity that are independent of rate. The more excitable regular afferents have lower current thresholds and sustained spiking responses to injected currents, while irregular afferent neurons have higher thresholds and transient responses. Differences in expression of low-voltage-activated potassium (K LV ) channels are emphasized in models of spiking regularity and excitability in these neurons, leaving open the potential contributions of the voltage-gated sodium (Na V ) channels responsible for the spike upstroke. We investigated the impact of different Na V current modes (transient, persistent, and resurgent) with whole-cell patch clamp experiments in mouse vestibular ganglion neurons (VGNs), the cultured and dissociated cell bodies of afferents. All VGNs had transient Na V current, many had a small persistent (non-inactivating) Na V current, and a few had resurgent current, which flows after the spike peak when Na V channels that were blocked are unblocked. Na V 1.6 channels conducted most or all of each Na V current mode, and a Na V 1.6-selective blocker decreased spike rate and altered spike waveforms in both sustained and transient VGNs. A Na V channel agonist enhanced persistent current and increased spike rate and regularity. We hypothesized that persistent and resurgent currents have different effects on sustained (regular) VGNs vs. transient (irregular) VGNs. Lacking blockers specific for the different current modes, we used modeling to isolate their effects on spiking of simulated transient and sustained VGNs, driven by simulated current steps and noisy trains of simulated EPSCs. In all simulated neurons, increasing transient Na V current increased spike rate and rate-independent regularity. In simulated sustained VGNs, adding persistent current increased both rate and rate-independent regularity, while adding resurgent current had limited impact. In transient VGNs, adding persistent current had little impact, while adding resurgent current increased both rate and rate-independent irregularity by enhancing sensitivity to synaptic noise. These experiments show that the small Na V current modes may enhance the differentiation of afferent populations, with persistent currents selectively making regular afferents more regular and resurgent currents selectively making irregular afferents less regular.

Efficacy and safety of focal pulsed-field ablation for ventricular arrhythmias: two-centre experience.

A pulsed electric field (PF) energy source is a novel potential option for catheter ablation of ventricular arrhythmias (VAs) as it can create deeper lesions, particularly in scarred tissue. However, very limited data exist on its efficacy and safety. This prospective observational study reports the initial experience with VA ablation using focal PF. The study population consisted of 44 patients (16 women, aged 61 ± 14years) with either frequent ventricular premature complexes (VPCs, 48%) or scar-related ventricular tachycardia (VT, 52%). Ablation was performed using an irrigated 4 mm tip catheter and a commercially available PF generator. On average, 16 ± 15 PF applications (25 A) were delivered per patient. Acute success was achieved in 84% of patients as assessed by elimination of VPC or reaching non-inducibility of VT. In three cases (7%), a transient conduction system block was observed during PF applications remotely from the septum. Root analysis revealed that this event was caused by current leakage from the proximal shaft electrodes in contact with the basal interventricular septum. Acute elimination of VPC was achieved in 81% patients and non-inducibility of VT in 83% patients. At the 3-month follow-up, persistent suppression of the VPC was confirmed on Holter monitoring in 81% patients. In the VT group, the mean follow-up was 116 ± 75 days and a total of 52% patients remained free of any VA. Pulsed electric field catheter ablation of a broad spectrum of VA is feasible with acute high efficacy; however, the short-term follow-up is less satisfactory for patients with scar-related VT.

Electron Transfer Dynamics at Dye-Sensitized SnO2/TiO2 Core/Shell Electrodes in Aqueous/Nonaqueous Electrolyte Mixtures.

The dynamics of photoinduced electron transfer were measured at dye-sensitized photoanodes in aqueous (acetate buffer), nonaqueous (acetonitrile), and mixed solvent electrolytes by nanosecond transient absorption spectroscopy (TAS) and ultrafast optical-pump terahertz-probe spectroscopy (OPTP). Higher injection efficiencies were found in mixed solvent electrolytes for dye-sensitized SnO2/TiO2 core/shell electrodes, whereas the injection efficiency of dye-sensitized TiO2 electrodes decreased with the increasing acetonitrile concentration. The trend in injection efficiency for the TiO2 electrodes was consistent with the solvent-dependent trend in the semiconductor flat band potential. Photoinduced electron injection in core/shell electrodes has been understood as a two-step process involving ultrafast electron trapping in the TiO2 shell followed by slower electron transfer to the SnO2 core. The driving force for shell-to-core electron transfer increases as the flat band potential of TiO2 shifts negatively with increasing concentrations of acetonitrile. In acetonitrile-rich electrolytes, electron injection is suppressed due to the very negative flat band potential of the TiO2 shell. Interestingly, a net negative photoconductivity in the SnO2 core is observed in mixed solvent electrolytes by OPTP. We hypothesize that an electric field is formed across the TiO2 shell from the oxidized dye molecules after injection. Conduction band electrons in SnO2 are trapped at the core/shell interface by the electric field, resulting in a negative photoconductivity transient. The overall electron injection efficiency of the dye-sensitized SnO2/TiO2 core/shell photoanodes is optimized in mixed solvents. The ultrafast transient conductivity data illustrate the crucial role of the electrolyte in regulating the driving forces for electron injection and charge separation at dye-sensitized semiconductor interfaces.

Robust inverse parameter fitting of thermal properties from the laser-based Ångstrom method in the presence of measurement noise using physics-informed neural networks (PINNs)

The two-dimensional laser-based Ångstrom method measures the in-plane thermal properties for anisotropic film-like materials. It involves periodic laser heating at the center of a suspended film sample and records its transient thermal response by infrared imaging. These spatiotemporal temperature data must be analyzed to extract the unknown thermal conductivity values in the orthotropic directions, an inverse parameter fitting problem. Previous demonstration of the metrology technique used a least-squares fitting method that relies on numerical differentiation to evaluate the second-order partial derivatives in the differential equation describing transient conduction in the physical system. This fitting approach is susceptible to measurement noise, introducing high uncertainty in the extracted properties when working with noisy data. For example, when noise of a signal-to-noise ratio of 10 is added to simulated amplitude and phase data, the error in the extracted thermal conductivity can exceed 80%. In this work, we introduce a new alternative inverse parameter fitting approach using physics-informed neural networks (PINNs) to increase the robustness of the measurement technique for noisy temperature data. We demonstrate the effectiveness of this approach even for scenarios with extreme levels of noise in the data. Specifically, the PINN-approach accurately extracts the properties to within 5% of the true values even for high noise levels (a signal-to-noise ratio of 1). This offers a promising avenue for improving the robustness and accuracy of advanced thermal metrology tools that rely on inverse parameter fitting of temperature data to extract thermal properties.

Experimental study on transient electromagnetic conductivity logging in cased well

Experimental study on transient electromagnetic conductivity logging in cased well

Spherical partial differential equation with non‐constant coefficients for modeling of nonlinear unsteady heat conduction in functionally graded materials

AbstractThe objective of this research paper is to propose an exact solution for resolving the transient conduction in a 2D sphere. The coefficients of governing equation are varied according to the material properties. The thermo‐physical properties are regarded as functions that follow a power‐law relationship concerning the radial direction. Both radial and angular thermal conductivity coefficients change with radius. Thermal boundary conditions are considered in a general state, which can cover different thermal conditions, including Dirichlet, Neumann, and Convection surface conditions. Laplace transform and Meromorphic function methods are used in the solution approach to the current unsteady problem. Two unsteady case studies with complex boundary conditions have been considered to show the credibility of the current solution. The results of both case studies have been successfully validated. The results confirm the high capability of the present solution in solving unsteady thermal problems of functionally graded materials in spherical coordinates.

Initial experience with ablation of ventricular arrhythmias using a pulsed-field system

Abstract Introduction Catheter ablation using radiofrequency (RF) current is a well-established method of treatment of ventricular arrhythmias (VA). However, RF ablation may fail to eliminate deeply located arrhythmogenic substrate. Pulsed-field (PF) is a novel energy source with a potential to create deeper lesions, especially in scar tissue. Purpose This study aims to present the data on safety and efficacy (acute outcome data) of VA ablation using PF. Methods The population consists of 15patients (5 women, age: 61 ± 19years) after previously failed RF ablation of VA. The underlying condition was nonischemic cardiomyopathy (53%), coronary artery disease (13%), and congenital heart disease (13%), respectively. No structural heart disease was present in 20% of cases. The mean left ventricular ejection fraction was 39 ± 13%. Eighty percent of patients had sustained VA, the remaining patients presented with frequent ventricular ectopy. Ablation was performed using a conventional irrigated 4-mm tip catheter in a combination with commercially available PF generator. Peripheral venous blood samples for the assessment of the plasmatic levels of high-sensitivity troponin T (hsTnT) were obtained the next day (usually 18-24hours) after the procedure. Results A mean of 17±12 PF applications (25A) per patient were delivered. In 5 patients (33%), an additional RF ablation (4±9 applications) was performed. Acute success as assessed by non-inducibility of VA or elimination of ectopic focus was achieved in all but one patient (93%). In 4 cases (27%), PF energy was applied within the great cardiac vein and subsequent coronary angiography did not reveal any abnormality. On the other hand, transient conduction system block occurred in 3 cases (20%) during PF application on the lateral LV wall remotely from the LV septum (complete AV block in one, LBBB in two patients). These events resolved in all cases within one hour. Ablation using PF did not result in excessive increase of hsTnT (657±482ng/l, with upper reference level of 14ng/l). Conclusion Initial experience with PF for the treatment of VA indicates high acute efficacy. The long-term effect is to be determined. PF applications in the ventricle may be associated with unexpected but transient conduction system damage, even when applications are performed remotely from the interventricular septum. The postprocedural increase in plasma troponin levels is only moderate.

Ultrafast Raman thermometry in driven YBa2Cu3O6.48

Signatures of photoinduced superconductivity have been reported in cuprate materials subjected to a coherent phonon drive. A “cold” superfluid was extracted from the transient Terahertz conductivity and was seen to coexist with “hot” uncondensed quasiparticles, a hallmark of a driven-dissipative system of which the interplay between coherent and incoherent responses is not well understood. Here, time resolved spontaneous Raman scattering was used to probe the lattice temperature in the photoinduced superconducting state of YBa2Cu3O6.48. An increase in lattice temperature of up to 140 K was observed by measuring the time dependent Raman scattering intensity of an undriven “spectator” phonon mode. This value is consistent with the estimated increase in quasiparticle temperature measured under the same excitation conditions. These temperature changes provide quantitative information on the nature of the driven state and its decay, and may suggest a strategy to optimize this effect. Published by the American Physical Society 2024

Mechanical behavior of dissimilar AL6XN-IN718 welded joint obtained by cold metal transfer

Cold metal transfer (CMT) welding process was used to join the AL6XN super-austenitic stainless steel to a nickel-based super alloy IN718. Microhardness, tensile and low cycle fatigue tests were carried out to determine the mechanical properties of the welded joint. The heat used to perform the weld decreases the microhardness in the heat affected zone (HAZ) of the IN718 material. A decrement of about 50% with respect to the base material (∼410 HV0.2) was observed, which is attributed to the microstructural transformation produced by the weld thermal cycles, inducing the partial dissolution of the γ'′ phase in the nickel matrix. In contrast, the HAZ on the AL6XN side, the microhardness tends to be similar with respect to the base material (∼203 HV0.2). In terms of the fracture energy, determined from the stress-strain plot, the welded joint decreases about 60–65% with respect to the base materials. This tendency was also observed in the case of the Charpy impact test behavior. From the low cycle fatigue test, it was observed that AL6XN material and AL6XN-IN718, performed better than the IN718 alloy, i.e. more tolerance to the strain cyclic, increasing the number of cycles to failure. A 3-D transient thermal conduction finite element model was developed to correlate the thermal history with the microstructural transformation on the HAZ and mechanical properties. The weld thermal cycles are in good agreement with the experimental measurements obtained by K-type thermocouples.

Transient heat conduction in multi-material topology optimization of thermoelastic structures involving dynamic constraints

This work presents a modified solid isotropic material with penalization (SIMP) for conducting dynamic-constrained multi-material topology optimization (MMTO) of thermoelastic structures subjected to transient thermal conduction. The novelty of this study is the multi-material optimization of instantaneous temperature conduction under specific frequency constraints, which has never been studied before. The proposed method has been developed for general models of multi-material interpolations such as thermal stiffness, heat capacity, and thermal stress coefficient. The temperature environment is formulated by applying prescribed mechanical and thermal loads that are exposed over a period of time. In this work, we focus on the objective of minimizing compliance in a transient heat conduction structure while simultaneously imposing constraints on the dynamics. With high temperatures, the stiffness of the optimization results decreases while stability is still guaranteed. The sensitivity of the objective function is subsequently calculated using the discretize-then-differentiate approach for the dynamic problem as well as the adjoint variable method. This study examines the impact of thermal fields and different time increments in conjunction with dynamic criteria. The outcomes of heat conduction result in notable alterations under identical dynamic constraint levels.

Improvement of water solidification via nanotechnology considering transient conduction within finned tank

Improvement of water solidification via nanotechnology considering transient conduction within finned tank

Moisture absorption and desorption characteristics and prediction model analysis of building thermal insulation materials

Understanding the isothermal moisture absorption and desorption characteristics of building thermal insulation materials and how they affect thermal conductivity, is curial for accurate building thermal design and energy-saving calculation. In this paper, five types of building thermal insulation materials are selected for investigation. First, the variation trend of the equilibrium mass moisture content of materials in different moisture absorption and desorption stages is studied employing the saturated salt solution method and the constant temperature and humidity box method, and the effect of temperature on the moisture absorption and desorption processes is evaluated. Additionally, the applicable model of the material in the moisture absorption and desorption process is obtained through a fitting analysis of the experimental data. Finally, the influence of the material’s moisture absorption and desorption characteristics on the thermal conductivity is analyzed using the transient thermal conductivity test method. The results highlight that there is a need to consider the moisture absorption and desorption processes to accurately determine the wet material thermal conductivity, and the hysteresis effect of the material in the moisture absorption and desorption processes is directly related to its microstructure and the relative humidity at the initial moisture desorption. At a temperature of 25 oC, the autoclaved aerated concrete exhibits its highest hysteresis rate of thermal conductivity during the moisture desorption process of third stage, reaching 13.2%.