Trace Amounts Research Articles

Aptamer-Conjugated Covalent-Organic Framework Nanochannels for Selective and Sensitive Detection of Aflatoxin B1.

Sensitive and selective detection of trace aflatoxin B1 (AFB1) in foods is of great importance to guarantee food safety and quality but still challenging because of its trace amount and the interference from the complex food matrix. Here, we report the integration of aptamer (Apt) and an ordered 2D covalent organic framework (COF) to solid-state anodic aluminum oxide (AAO) nanochannels (Apt/COF/AAO) for selective and sensitive detection of trace AFB1. The high specificity of Apt for AFB1 led to a selective change in the surface charge of Apt/COF/AAO and in turn the current change of the nanochannel, permitting the selective and sensitive determination of trace AFB1 in complex food samples. The developed nanofluidic sensor gave a wide linear range (1-500 pg mL-1), low detection limit (0.11 pg mL-1), and good precision (relative standard deviation of 1.5% for 11 replicate determinations of 100 pg mL-1). In addition, the developed sensor was successfully used for the detection of AFB1 in food samples with the recovery of 86.9%-102.5%. The coupling of Apt-conjugated 2D COF with an AAO nanochannel provides a promising way for sensitive and selective determination of food contaminants in complex samples.

Volumetric printing and non-destructive drug quantification of water-soluble supramolecular hydrogels.

Vat photopolymerisation 3D printing is being actively explored for manufacturing personalised medicines due to its high dimensional accuracy and lack of heat application. However, several challenges have hindered its clinical translation, including the inadequate printing speeds, the lack of resins that give soluble matrices, and the need for non-destructive quality control measures. In this study, for the first time, a rapid approach to producing water-soluble vat photopolymerised matrices and a means of non-destructively verifying their drug content were investigated. Volumetric printing, a novel form of vat photopolymerisation, was used to fabricate personalised warfarin-loaded 3D-printed tablets (printlets). Eight different formulations containing varying amounts of warfarin (0.5-6.0% w/w) were used to print two different sized torus-shaped printlets within 6.5 to 11.1s. Nuclear magnetic resonance (NMR) spectroscopy revealed the presence of only trace amounts of unreacted acrylate monomers, suggesting that the photopolymerisation reaction had occurred to near completion. All printlets completely solubilised and released their entire drug load within 2.5 to 7h. NIR spectroscopy (NIRS) was used to non-destructively verify the dose of warfarin loaded into the vat photopolymerised printlets. The partial least square regression model built showed strong linearity (R2 = 0.980), and high accuracy in predicting the drug loading of the test sample (RMSEP = 0.205%). Therefore, this study advances pharmaceutical vat photopolymerisation by demonstrating the feasibility of producing water-soluble printlets via volumetric printing and quantifying the drug load of vat photopolymerised printlets with NIRS.

Separation of tolperisone and its degradation products by a dual cyclodextrin capillary electrophoresis system to study their potential role in allergic events

Tolperisone is a centrally acting muscle relaxant that has been used for the treatment of post-stroke spasticity and low back pain. Recently, the safety of tolperisone pharmaceutical products has been reassessed due to growing concerns over allergic adverse events. Reactive degradants of tolperisone may be responsible for these hypersensitivity reactions. By forming adducts with proteins, they may act as haptens that could evoke allergic reactions. The objective of this study was to examine the presence of these degradants in tolperisone pharmaceutical products and to assess their reactivity to elucidate their possible role in the pro-allergic effect of tolperisone. For this purpose, capillary electrophoresis UV detection (CE-UV) method was developed and validated for the quantification of degradants. A dual cyclodextrin system was applied to achieve the appropriate migration order enabling the analysis of 2-methyl-1-(4-methylphenyl)prop-2-en-1-one (MMP) and 1-(4-methylphenyl)propan-1-one (MMPO) in the presence of high concentrations of tolperisone. MMP was identified as the main degradant in forced degradation tests of the active pharmaceutical ingredient. Differences in MMP content of tolperisone products by different manufacturers have also been found, highlighting the role of formulation in their stability. High reactivity of MMP was demonstrated as rapid and almost complete adduct formation with cysteine was found. This degradant thus might be responsible for the allergic adverse effects of tolperisone even when it is present in trace amounts in tablets by readily reacting with proteins in vivo.

Mercaptopropionic acid-capped CdZnTe Quantum dots as Fluorescence Probe for Sensitive Detection of Cr(III) ions.

Although Cr(III) ions are essential for the human body, excessive amounts can lead to skin inflammation, allergic reactions, and genotoxicity. A highly sensitive fluorescence probe was developed using mercaptopropionic acid (MPA) capped CdZnTe quantum dots (QDs) synthesized via an aqueous solution heating method for precise detection of Cr(III) ions. The synthesized MPA-CdZnTe QDs had a size of 2.38 ± 0.13nm and exhibited a zinc-blende structure, with MPA molecules effectively capping the surface through Cd-S bonds. Investigation into the effects of reflux times and solution pH on the absorption and fluorescence spectra of MPA-CdZnTe QDs revealed the occurrence of Ostwald ripening during prolonged reflux processes. The quantum yield (QY) of the synthesized CdZnTe QDs could reach 89%, and the QY was higher under acidic conditions than alkaline. Leveraging the quenching effect of Cr(III) ions on MPA-CdZnTe QDs, a robust method for the quantitative detection of trace amounts of Cr(III) ions was established. Linear quenching behavior was observed within the concentration range of 3.33 × 10- 6 to 5.00 × 10- 4 mol L- 1 for Cr(III) ions, with the fluorescence quenching rate described by a linear regression equation: 1-F/F0 = 0.218 + 829.5268CCr(III). The limit of detection was determined to be 2.63 × 10- 6 mol L- 1. The mechanism of the fluorescence behavior of MPA capped CdZnTe QDs towards Cr(III) ions was photo-induced electron transfer.

Interface-assisted synthesized covalent organic framework film for efficient extraction of microcystins in aquatic organisms

Covalent organic framework (COF) film-based solid-phase extraction (F-SPE) has garnered great attention in sample pretreatment. However, harsh synthesis conditions of COF films have severely hindered their potential applications. In this study, a kind of COF (TPB-DMTP) films were fabricated via a liquid-liquid interfacial synthesis method at a mild condition. The obtained films exhibited excellent extraction performance towards microcystins (MCs, an algal toxin) due to their porous structure, high specific surface area and abundant accessible adsorption sites. Coupled TPB-DMTP films-based F-SPE with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS), a sensitive and environment-friendly analytical method was established for MCs detection. Under the optimal conditions, this method possessed wide linear ranges (2.0–800.0 pg mL−1) with good linearity (R ≥ 0.9991), low limits of detection (0.8–3.0 pg mL−1) and satisfactory precision (RSDs ≤7.1 %), which then successfully applied for MCs detection in actual aquatic organism samples. Trace amounts of MC-RR (42.4 pg mL−1) and MC-YR (14.6 pg mL−1) were detected in the mussels. The results demonstrate the excellent application potential of COF films in sample pretreatment.

Site differentiation strategy for selective strontium uptake and elution within an all-inorganic polyoxoniobate framework

Selective uptake and elution of trace amounts of hazardous radioactive 90Sr from large-scale high-level liquid waste (HLW) is crucial for sustainable development. Here, we propose a site differentiation strategy, based on the presence of distinct selective metal capture sites (concavity site and tweezer site) within the giant polyoxoniobate (PONb) nanoclusters of an all-inorganic PONb framework (FZU-1). Through this strategy, FZU-1 can not only effectively remove 98.9% of Sr²⁺ from simulated nuclear liquid waste, performing best among the reported Sr adsorbents, but also achieve desorption of adsorbed Sr²⁺ ions by selectively loading Na⁺ ions, thus enabling the recycling of FZU-1. Based on the well-defined single-crystal structures and theoretical studies, it can be revealed that the rapid and selective uptake of Sr²⁺ is attributed to the strong binding energy between the Sr²⁺ ions and the concavity sites. The effective elution of Sr²⁺, on the other hand, stems from the preferential binding of Na⁺ ions at the tweezer sites, elevating the cluster’s electrostatic potential and indirectly facilitating the elution of Sr²⁺ ions. The exceptional stability of FZU-1, along with its rapid and selective Sr²⁺ capture and elution capabilities, positions it as a promising candidate for large-scale nuclear waste treatment and groundwater remediation applications.

Biosynthesis of pterostilbene in Escherichia coli from resveratrol on macroporous adsorption resin using a two-step substrate addition strategy.

Pterostilbene (PST), a 3',5'-O-methylated derivative of resveratrol (RSV), is a potent natural antioxidant produced by some plants in trace amounts as defense compound. It exhibits various health-promoting activities, such as anticancer, antiviral, and antimicrobial effects. Large-scale biosynthesis of PST is crucial due to the challenges associated with extracting it from plants. This study aims to develop an efficient method for PST production using an engineered Escherichia coli strain by feeding RSV as a precursor. We introduced a two-step substrate addition strategy combined with immobilized RSV (IMRSV) on macroporous adsorption resin (MAR) to enhance PST production. Five MARs were selected for RSV immobilization, and the substrate addition strategy and fermentation parameters for PST synthesis were optimized. A maximum PST concentration of 403 ± 9 mg/L was achieved, representing a 239% increase over the control, which in a one-step addition of free RSV. The PST titer reached 395 ± 24 mg/L in a 3-L bioreactor. In conclusion, the combination of a two-step substrate addition system and IMRSV is a promising approach for the economical and industrial-scale production of PST.

Empowering the Sustainable Development of High-End Alloys via Interpretive Machine Learning.

The extensive use of scarce, expensive, and toxic elements in high-performance metal alloys restricts their sustainable development. Here we propose a novel alternative alloying-element design strategy that combines physicochemical-factor screening, a "black-box" interpretative method based on SHapley Additive exPlanation analysis, and sensitivity analyses of elemental influence. A "white-box" model of alloy compositions and properties is therefore established that enables the rational selection of abundant elements and the efficient designs of alloys with substitution for scarce alloying elements. The success of this design strategy is demonstrated by reducing the Co content in the C70350 alloy series (e.g., Cu-1.3Ni-1.4Co-0.56Si-0.03Mg (wt.%)). Indeed, Cu-1.95Ni-0.5Co-0.6Si-0.2Mg-0.1Cr (wt.%) is obtained as an ultra-low-Co-containing alloy by substituting only a trace amount of Cr for Co in the Cu-Ni-Co-Si-Mg system, followed by compositional optimization. Although the Co content is reduced by 64% (i.e., from 1.4 to 0.5 wt.%), the properties of the alloy (ultimate tensile strength and electrical conductivity of 850MPa and 47.2%IACS, respectively) are comparable to those of the C70350 alloy. This study contributes to the sustainable and green development of metallic materials by providing a new avenue for substituting abundant elements for scarce and undesired elements in metal alloys.

Nitrogen and Sulfur Doped Porous Carbon Sheet with Trace Amount of Iron as Efficient Polysulfide Conversion Catalyst for High Loading Lithium-Sulfur Batteries.

The major challenges in enhancing the cycle life of lithium-sulfur (Li-S) batteries are the polysulfide (PS) shuttling and sluggish reaction kinetics (S to Li2S, Li2S to S). To alleviate the above issues use of hetero atom doped carbon as cathode host matrix is a low-cost and efficient approach as it works as a dual-functional framework for PS anchoring as well as electrocatalyst for faster redox kinetics. Here, the dual role of the Fe-containing heteroatom-doped carbon sheets (CS) in chemisorption of Li2S6 and catalyzing its faster conversion to Li2S is established through UV-Vis, XPS and CV studies. To substantiate the catalytic effect composite cathodes were prepared by encapsulating sulfur in CS which is further blended with carbon nanotubes (CNTs) to form free-standing cathode. The electrochemical performance of the three cathodes viz., S@Fe-N-CS-CNT, S@Fe-S-CS-CNT and S@Fe-NS-CS-CNT were evaluated by constructing Li-S cells. Among all, the S@Fe-NS-CS-CNT delivers a high initial discharge capacity of 1017 mAh g-1 at 0.5 C rate and sustains 751 mAh g-1 capacity after 260 cycles with a capacity retention of 73.8 %. Even at high S-loading (12 mg cm-2), it delivers an initial discharge capacity of 892 mAh g-1 and it retained 575 mAh g-1 after 200 cycles.

Enhancing insulating properties of glass-fiber reinforced polymers using plasma fluorination-modified boron nitride nanosheets

The insulation failure of glass fiber-reinforced polymers (GFRP) limits their use in high-voltage insulation fields. In this study, boron nitride nanosheets (BNNS) were prepared using ball-milling and further fluorinated via dielectric barrier discharge (DBD) plasma treatment. The GFRP nanocomposites were fabricated using different filler types and doping concentrations. The test results indicated that fluorinated BNNS (F-BNNS) displays good dispersion and interfacial compatibility, enhances the interfacial bonding strength of the “fiber-matrix-filler” ternary system in GFRP, and reduces the internal defects of materials. In addition, the insulating properties of the composites were related to the filler concentration. Adding a trace amount of F-BNNSs increased the flashover and breakdown voltages of the GFRP by up to 28.77% and 21.62%, respectively. The results of molecular dynamics simulations and trap distribution calculations showed that plasma fluorination of BNNS increases the bandgap and deep trap energy level at the interface. The extremely strong charge-binding ability of the deep traps inhibits continuous charge injection and regulates carrier migration, which improves the insulating properties of the composites. The results of this study provide a novel, environmentally friendly, and efficient solution for improving the insulating properties of GFRP.

Recent Advances in Monitoring Microbial Toxins in Food Samples by HPLC-Based Techniques: A Review

This study examines the significant impact of bacterial, algal, and fungal toxins on foodborne illnesses, and stresses the importance of advanced detection techniques, such as high-performance liquid chromatography (HPLC)-based methodologies. It emphasizes the urgent need for further advancements in these techniques to ensure food safety, as they offer significant benefits, including low detection limits and the ability to be combined with other techniques to detect a wide range of toxins. In this regard, HPLC has emerged as a versatile and sensitive analytical technique for this purpose. Various HPLC methods, often enhanced with detectors such as ultraviolet (UV), fluorescence (FD), and mass spectrometry (MS), have been developed to identify and quantify microbial toxins in a wide variety of food samples. Recent advancements include HPLC-FD methods that utilize the natural fluorescence of certain aflatoxins, improving detection sensitivity. HPLC-MS/MS and UHPLC-MS/MS techniques offer high selectivity and sensitivity, making them suitable for detecting a wide range of toxins in trace quantities. The adaptability of HPLC, combined with innovative detection technologies and sample preparation methods, holds significant potential for enhancing food safety monitoring and reducing the global burden of foodborne diseases.

Trace Amount of Ir Decorated NiFe Phosphide In-Situ Grown on Carbon Cloth as Cost-Effective Electrocatalyst for Oxygen Evolution Reaction.

Cost-effective electrocatalysts is a key constituent to establish the balance of cost and catalytic efficiency for oxygen evolution reaction (OER) via water electrolysis in the area of energy conversion and storage. NiFe phosphide decorated with trace amount of iridium (Ir) species in-situ grown on carbon cloth was prepared by a facile wet chemistry approach followed by a phosphorization post-treatment at a relative low temperature. The optimal electrocatalyst, Ir2-NiFePx/CC, exhibits excellent OER activity, with an low overpotential of 190 mV at 10 mA cm-2 for alkaline OER, and a desirable long-term durability over 90 h. The outstanding OER performance stems from the structural evolution via phosphorization process, Ir decoration with more high-valence stated Ir4+ species, and tight connection between individual components of the electrode, which gives rise to the strong activity to the active sites and faster reaction kinetics in the alkaline OER process. Mover, the Ir loading was as low as approximately ~1.7 wt % (0.29 mg cm-2), showing promissing propective in cost-effective OER.

A synergetic effect of light and anion: near-infrared colorimetric monitoring of nitric oxide (NO) release from fluoride/cyanide anions and a water responsive ruthenium nitrosyl complex.

Near-infrared (NIR) spectral-responsive multitasking chemical systems are always advantageous in biological and environmental systems. Although ruthenium complexes are highly attractive compounds for many applications, studies on NIR optical responsive sensors are very limited because of their synthetic difficulties. The sensing of fluoride and cyanide ions using ruthenium nitrosyl complexes is not known. In this study, we report the synthesis and characterization of a new terpyridine-based ruthenium nitrosyl complex [Ru(Cl)2NO(terpy-C6H4OH)] 1·Ru-OH. The complex exhibited distinct NIR absorptions at 680 nm, as well as a visible color change with the fluoride ion in DMSO-CH3CN medium. However, when the solvent is changed to DMSO-H2O, it responds only with a cyanide ion with a distinct colorimetric change. Binding of the F- ion leads to deprotonation of 1·Ru-OH; the deprotonated complex is also used for the colorimetric detection of a trace amount of water in DMSO and acetonitrile with a limit of detection (LOD) of 0.034 wt% and 0.007 wt%, respectively. Ruthenium nitrosyl complexes have appeared as promising platforms for light-controlled release of nitric oxide (NO), which can be beneficial for therapeutic application. NO release studies of 1·Ru-OH by UV-vis and FT-IR spectroscopy confirm that it can release NO in a light-controlled manner. In addition, the NO release could be monitored by the naked eye with a color change and spectral change in the NIR region. Importantly, NO release studies revealed that the rate of NO release could be modulated in the presence of the F- ion. Here, the fluoride ion acts as an allosteric regulator. These results demonstrate that 1·Ru-OH is both a promising multitasking colorimetric and NIR sensor and a colorimetric responsive NO-releasing agent.

Applied Investigation of Methyl, Ethyl, Propyl, and Butyl Mercaptan as Potential Poisons in the Gas Phase Polymerization Reaction of Propylene.

The polypropylene (PP) synthesis process is crucial in the plastics industry, requiring precise control as it directly impacts the catalytic activity and the final product's performance. This study investigates the effects of trace amounts of four different mercaptans on the polymerization of propylene using a fourth-generation Ziegler-Natta (ZN) catalyst. Various concentrations of these mercaptans were tested, and results showed that their presence significantly reduced the melt flow index (MFI) of the final PP. The most notable MFI decrease occurred at 37.17 ppm of propyl mercaptan and 52.60 ppm of butyl mercaptan. Methyl and ethyl mercaptan also reduced the MFI at lower concentrations, indicating that mercaptans act as inhibitors by slowing down the polymerization process and reducing the fluidity of molten PP. The highest MFI increase was observed at lower concentrations of each mercaptan, suggesting that smaller molecular inhibitors require less concentration. This trend was also seen in the catalyst's productivity, where lower concentrations of methyl mercaptan reduced PP production more effectively than higher concentrations of butyl mercaptan. Fourier transform infrared spectroscopy (FTIR) identified interactions between the mercaptans and the ZN catalyst. Computational analysis further supported these findings, providing insights into the molecular interactions and suggesting possible inhibition mechanisms that could impact the final properties of polypropylene.

High-yield preparation of 1T-MoS2 with excellent piezo-catalytic activity via W6+ doping for antibiotics degradation and Cr(VI) reduction: Mechanistic insights from characterizations to DFT calculations

Molybdenum disulfide (MoS2) is a promising piezoelectric material. Herein, a simple method is reported for the high-yield production of metallic (1 T) phase MoS2 which exhibits excellent piezo-catalytic activity by in-situ doping of trace amounts of W6+. At 1 wt% W6+ doping, the 1 T phase of the obtained MoS2 reaches a concentration as high as 85.56 % and the piezoelectric coefficient and piezoelectric response current increase by 1.67 and 1.18 times, respectively, as compared to pristine MoS2. Consequently, W1.0-MoS2 can remove more than 99.8 % of tetracycline and 97.3 % of Cr(VI) in 10 min. Experimental characterization and theoretical calculations indicate that the enhanced piezoelectric catalytic activity is attributed to the strong synergistic effect between 1T-MoS2 and W6+ doping, which facilitates the rapid generation of hydroxyl radicals and superoxide radicals. This new strategy of doping 1 T/2H-MoS2 with W6+ can significantly enhance the piezoelectric catalytic performance, providing important insights for the removal of pollutants.

MXene-montmorillonite nanocomposites-based scaffold sensors for early pancreatic cancer diagnosis

Pancreatic cancer is increasingly prevalent and characterized by a high mortality rate. Due to the limitations of current diagnostic methods, early-stage detection remains elusive, contributing to persistently low survival rates among affected individuals. Nanomaterials have garnered significant attention in cancer research for their potential diagnostic applications. Among these, MXenes – a novel family of two-dimensional nanomaterials composed of transition metal carbides, nitrides, and carbonitrides – are of particular interest due to their unique properties. These include high electrical conductivity, hydrophilicity, thermal stability, large interlayer spacing, tunable structure, and high surface area. These characteristics make MXenes highly effective for detecting trace amounts of various analytes. In addition, their tunable structure enables precise manipulation of their properties, allowing for optimized sensing responses. Montmorillonite nanoclay (MMT), a member of the smectite group of natural clay minerals, is known for its ability to promote bone development and influence cell behavior. When combined with MXenes, MMT forms promising nanocomposites for early pancreatic cancer detection through sensing applications. The Ti3C2 MXene-MMT nanocomposites exhibit potential as scaffold sensors capable of distinguishing cancerous from non-cancerous samples by observing the distinctive patterns in resistance changes. In addition, MXenes possess excellent selectivity, allowing for the reliable identification of targeted analytes from a complex mixture of chemical and biological analytes. Due to the advanced sensing capabilities of MXene-MMT composite scaffold sensors, they hold great promise for early cancer diagnosis and tissue regeneration, providing a novel therapeutic approach to improving patient outcomes.

Identifying sesterterpenoids via feature-based molecular networking and small-scale fermentation.

Terpenoids are known for their diverse structures and broad bioactivities with significant potential in pharmaceutical applications. However, natural products with low yields are usually ignored in traditional chemical analysis. Feature-based molecular networking (FBMN) was developed recently to cluster compounds with similar skeletons, which can highlight trace amounts of unknown compounds. Fusoxypene A is a sesterterpene synthesized by Fusarium oxysporum fusoxypene synthase (FoFS) with a unique 5/6/7/3/5 ring system. In this study, the FoFS-containing biosynthetic gene cluster was identified from F. oxysporum FO14005, and an efficient FBMN-based strategy was established to characterize four new sesterterpenoids, fusoxyordienoid A-D (1-4), based on a small-scale fermentation strategy. A cytochrome P450 monooxygenase, FusB, was found to be involved in the functionalization of fusoxypene A at C-17 and C-24 and responsible for the hydroxylation of fusoxyordienoid A at C-1 and C-8. This study highlights the potential of FBMN as a powerful tool for the discovery and characterization of natural compounds with low abundance. KEY POINTS: Combined small-scale fermentation and FBMN for rapid discovery of fusoxyordienoids Characterization of four new fusoxyordienoids with 5/6/7/3/5 ring system Biosynthetic pathway elucidation via tandem expression and substrate feeding.

Rapid and highly sensitive detection of trace chromium and copper in tea infusion using laser-induced breakdown spectroscopy combined with electrospinning technology

Tea infusion, as one of the most popular beverages, is favored by people around the world. However, tea plants accumulate heavy metals from the soil during growth, which are gradually transferred to the leaves and subsequently decomposed into the tea infusion after soaking in hot water. Long-term consumption of tea infusion containing heavy metals may lead to severe health issues, such as liver dysfunction and cancer. Therefore, rapid, precise, and highly sensitive detection of heavy metals in tea infusion becomes crucial for human health. Traditional methods, such as atomic absorption spectroscopy (AAS), suffer from long detection cycles, high costs, and the risk of secondary pollution from chemical extraction reagents. Thus, this paper presents a method, using laser-induced breakdown spectroscopy combined with electrospinning technology (LIBS-ES), to detect trace amounts of Cr and Cu in tea infusion. The electrospun nanofiber membranes (ENM) were modified with gold nanoparticles (AuNPs) and silver nanoparticles (AgNPs), achieving ultra-sensitive detection of Cr and Cu. The experiment results show that the limits of detection for Cr and Cu are 5 μg/L and 10 μg/L, respectively. Moreover, this method was successfully applied to the detection of Cr and Cu in seven different types of tea infusion, achieving recovery rates of 99 %-106 % and 99 %-108 %, respectively. The method demonstrated good performance even under the interference of other ions at various concentrations, providing a reference for the rapid and highly sensitive detection of heavy metals in tea infusion.

Ant‐Nest Corrosion in Copper Pipes Triggered by Ethylene Vinyl Acetate‐Based Adhesive

AbstractCorrosion of condenser circuits in refrigeration systems significantly impacts appliance reliability and longevity. This study investigates an unreported cause linked to changing adhesive materials during copper pipe assembly. Transitioning from a polyethylene‐based adhesive to one containing ethylene vinyl acetate caused unexpected perforation of copper coils within months. We hypothesized that even trace amounts of acetic acid, a byproduct of the latter adhesive, trigger a peculiar localized morphology known as “ant‐nest corrosion.” We propose using ethylene vinyl acetate‐free adhesives to prevent this issue in refrigeration systems.

Biosensor development for diabetes diagnosis: Determining relevant miRNA using a newly developed N-annulated perylene fluorescent dye

MicroRNAs (miRNAs) have emerged as essential biomarkers for disease diagnosis, and several techniques are available to determine type 2 diabetes (T2D) relevant miRNAs. However, detecting circulating miRNAs can be challenging due to their small size, low abundance, and high sequence similarity, often requiring sensitive detection approaches combined with additional amplification processes. Laser-induced fluorescence (LIF) is a classic analytical method suitable for sensitively detecting trace amounts of nucleotide acid. Duplex-specific nuclease (DSN)-mediated amplification recently gained attention due to its catalytic activity based on target recycling, demonstrating a promising approach for miRNA amplification. This work developed a novel N-annulated perylene fluorescent dye to create a biosensor to analyze the miRNA (miR-223) relevant to T2D. The amine-reactive fluorescent dye assists the amidation reaction for nucleotide labeling, giving the oligonucleotide probe a high fluorescence quantum yield and sufficient water solubility. By combining the locked nucleic acid (LNA) modified oligonucleotide fluorescent probe to enhance the stability of LNA/RNA hybrids, thereby improving the DSN-mediated target miR-223 recycling for signal amplification, the proposed biosensor can highly selectively determine miR-223 with a limit of detection (LOD, S/N = 3) of 9.5 pM. When applied to real-world samples, the biosensor demonstrated its potential to distinguish between T2D patients and healthy controls.