Dihedral Angle Research Articles

Analysis of chi angle distributions in free amino acids via multiplet fitting of proton scalar couplings

Abstract. Scalar couplings are a fundamental aspect of nuclear magnetic resonance (NMR) experiments and provide rich information about electron-mediated interactions between nuclei. 3J couplings are particularly useful for determining molecular structure through the Karplus relationship, a mathematical formula used for calculating 3J coupling constants from dihedral angles. In small molecules, scalar couplings are often determined through analysis of one-dimensional proton spectra. Larger proteins have typically required specialized multidimensional pulse programs designed to overcome spectral crowding and multiplet complexity. Here, we present a generalized framework for fitting scalar couplings with arbitrarily complex multiplet patterns using a weak-coupling model. The method is implemented in FitNMR and applicable to one-dimensional, two-dimensional, and three-dimensional NMR spectra. To gain insight into the proton–proton coupling patterns present in protein side chains, we analyze a set of free amino acid one-dimensional spectra. We show that the weak-coupling assumption is largely sufficient for fitting the majority of resonances, although there are notable exceptions. To enable structural interpretation of all couplings, we extend generalized and self-consistent Karplus equation parameterizations to all χ angles. An enhanced model of side-chain motion incorporating rotamer statistics from the Protein Data Bank (PDB) is developed. Even without stereospecific assignments of the beta hydrogens, we find that two couplings are sufficient to exclude a single-rotamer model for all amino acids except proline. While most free amino acids show rotameric populations consistent with crystal structure statistics, beta-branched valine and isoleucine deviate substantially.

Benzimidazole based electron-transport hosts for efficient pure blue narrowband OLED device

Two electron-transport host materials are synthesized by linking anthracene with benzimidazole derivatives through a unit of methyl substituted phenyl. The methyl substitution generates a large dihedral angle between the benzimidazole plane and bridging phenyl, keeping the excited state distribution and energy levels of T1 and S1 unchanged. The electron-only devices reveal that the two hosts have obviously enhanced electron transport ability than that of Ph-AN-MBP without benzimidazole. As a result, the devices with Ph-AN-BIZ and N1-AN-BIZ as hosts and a blue multiple resonance material of tBuCz-DABNA as emitter exhibit high external quantum efficiency of 10.1 % and 9.1 %, respectively, and low turn-on voltage of 2.7 V, which is better than those of Ph-AN-MBP based device (7.9 %, 3.4 V). And their electroluminescence spectra have a very small full-width at half-maximum of 16.2 nm and pure blue color with CIE coordinates of (0.12, 0.11).

New topology design of 3D chiral metamaterials with compression-twist coupling effect

Chiral structure can be used for compression-twist coupling (CTC) metamaterials, exhibiting twist deformation under axial compression. In this study, a series of chiral CTC metamaterials were designed based on the 3D tetra-chiral structure, including cube-type and cylinder-type structures. The CTC properties of these metamaterials were investigated in detail by finite element simulations and experiments. The results show that the proposed chiral configurations have better CTC effects than the original 3D tetra-chiral structure. Furthermore, a wide range of adjustable torsion angles can be achieved by changing the geometrical parameters. Finally, the energy absorption properties of these structures were also discussed.

Vibrational frequency fluctuations of poly(N,N-diethylacrylamide) in the vicinity of coil-to-globule transition studied by two-dimensional infrared spectroscopy and molecular dynamics simulations.

Poly(N,N-diethylacrylamide) (PdEA), one of the thermoresponsive polymers, in aqueous solutions has attracted much attention because of its characteristic properties, such as coil-to-globule (CG) transition. We performed two-dimensional infrared spectroscopy and molecular dynamics (MD) simulations to understand the hydration dynamics in the vicinity of the CG transition at the molecular level via vibrational frequency fluctuations of the carbonyl stretching modes in the side chains of PdEA. Furthermore, N,N-diethylpropionamide, a repeating monomer unit of PdEA, is also investigated for comparison. From decays of the frequency-frequency time correlation functions (FFTCFs) of the carbonyl stretching modes, we consider that inhomogeneity of the hydration environments originates from various backbone configurations of PdEA. The degree of the inhomogeneity depends on temperature. Hydration water molecules near the carbonyl groups are influenced by the confinements of the polymers. The restricted reorientation of the embedded water, the local torsions of the backbone, and the rearrangement of the whole structure contribute to the slow spectral diffusion. By performing MD simulations, we calculated the FFTCFs and dynamical quantities, such as fluctuations of the dihedral angles of the backbone and the orientation of the hydration water molecules. The simulated FFTCFs match well with the experimental results, indicating that the retarded water reorientations via the excluded volume effect play an important role in the vibrational frequency fluctuations of the carbonyl stretching mode. It is also found the embedded water molecules are influenced by the local torsions of the backbone structure within the time scales of the spectral diffusion.

Nonalternating π-System Mediated Spin Coupling in Azulene Nitronyl Nitroxide Diradicals.

To explore the distinctions in spin coupling between the molecular bridges of alternating and nonalternating π-systems, we synthesized a pair of isoelectronic compounds, namely, 2,6-Na-NN and 2,6-Az-NN, by utilizing naphthalene and azulene (naphthalene = Na and azulene = Az) as the bridges, respectively. Moreover, we conducted assessments to predict the coupling paths for nonalternating azulene. Variable-temperature EPR (VT-EPR) and SQUID results consistently reveal that both 2,6-Na-NN and 2,6-Az-NN exhibit antiferromagnetic coupling interactions, with coupling constants of J(2,6-Na-NN) = -22.3 cm-1 and J(2,6-Az-NN) = -30.1 cm-1, respectively. Density functional theory computations support these discoveries by revealing negative coupling constants (J < 0) and the spin densities population of the diradicals are observed to delocalize into the molecular bridges. This work suggests the most suitable coupling path for 2,6-Az-NN. In addition, we have investigated the potential spatial resistance of the diradicals in conjunction with single-crystal data. Theoretical calculations underestimating the torsion angle of the diradicals and overestimating the value of the magnetic coupling provide an explanation for this phenomenon. The final experimental results and theoretical calculations show that the 2,6-Az-NN coupling path prefers short paths.

Presenting a new fluorescent probe, methyl(10-phenylphenanthren-9-yl)sulfane sensitive to the polarity and rigidity of the microenvironment: applications toward microheterogeneous systems.

A molecule, methyl(10-phenylphenanthren-9-yl)sulfane (MPPS), with a straightforward structure, has been synthesized, characterized, and explored as a new fluorescent probe for microheterogeneous systems. The photophysical properties of MPPS have been studied through experimental and theoretical calculations using the range-separated hybrid functional CAM-B3LYP in conjunction with a 6-311++g(d,p) basis set. Theoretical calculations show that the freely rotating phenyl ring forms a 94° dihedral angle with the phenanthrene ring in the ground state. Experimentally found two absorption bands correspond to the n → π* and π → π* transitions supported by the frontier molecular orbital calculations. Two excited singlet states, E-1 and E-2 (the former being more stable than the latter in the gas phase), exist with dihedral angles between the phenyl and phenanthrene rings as 142° and 133°, respectively, in the gas phase. Two emitting states in a condensed medium of varying polarities are supported by the steady-state fluorescence and fluorescence intensity decay data. Emission energies, fluorescence intensities, and excited singlet state lifetimes change with the polarity of the solvents. To support that the free rotation in the molecule is responsible for these changes, the fluorescence properties of another molecule, methyl(10-(o-tolyl)phenanthren-9-yl)sulfane (MTPS), with restricted rotation of the substituted benzene, i.e., o-tolyl ring have been studied. The fast-intensity decay component of MPPS is ascribed to the conformer in the E-1 state. The molecule has proved to be an excellent polarity probe explored to determine the critical micelle concentrations (cmc) values of different surfactants, which agree well with the literature reports. Different regions of binding isotherm (specific, non-cooperative, cooperative, and massive binding) of a gemini surfactant, 12-6-12,2Br- with bovine serum albumin (BSA) have been successfully demonstrated by the steady-state and time-resolved fluorescence and fluorescence anisotropic properties of MPPS. Docking results show that MPPS resides in the hydrophobic pocket of BSA. The fluorescence quenching of BSA by MPPS reveals the location of Trp residues of BSA. Thus, a polarity and molecular rigidity-sensitive fluorescent molecule, MPPS has been presented here that can potentially be used to monitor the changes in the microenvironment of biomolecules in different processes.

Synthesis, structure, supramolecular assembly inspection by Hirshfeld surface analysis, DFT study and molecular docking inspection of 4,5-bis(2-chlorophenyl)-8a-phenylhexahydropyrimido[4,5-d]pyrimidine-2,7(1H,3H)-dithione

We studied the three-component condensation of 2-chloraldehyde, acetophenone, and thiourea in conjunction with HCl, resulting in the formation of a new compound: 4,5-bis(2-chlorophenyl)-8a-phenylhexahydropyrimido[4,5-d]pyrimidine-2,7(1H,3H)-dithione (CPPD). The compound's structure was affirmed via X-ray diffraction study. The asymmetric unit contained two molecules that were independent relative to crystallography and an ethanol solvent. The difference between independent molecules was explored by dihedral angles between similar rings in both molecular. The difference between molecules was further explored by molecular overlay plot. The supramolecular assembly was supported via diverse intermolecular interactions which were studied through the use of Hirshfeld surface analysis. Electronic structure computations were carried out at the ωb97xd/tzvp level. Natural bonding orbital (NBO), and FMO study reveal reactivity and charge transfer mechanisms within the compound. Furthermore, the nature of bonding in the present molecule is characterized through quantum theory of atoms in molecules (QTAIM), ELF, and LOL studies. Ab-initio molecular dynamic (AIMD) revealed the kinetic and thermodynamic stability at 300 K. The DFT results have excellent correlation with experimental data. The molecular docking and molecular dynamics simulation further revealed the compound to get deep access in the active pocket of type 2 anti-diabetes GLUT4 protein. This was validated by the stable dynamics as demonstrated by the uniform behavior of the root mean square deviation (RMSD) plot. The root mean square fluctuation (RMSF) also showed stable interactions with amino acids in the presence of the compound. Further, simulation trajectories on the basis of binding free energies indicate the significant role of van der Waals force in the formation of the intermolecular docked complex. This concluded the compound might be a potent structure for the development of anti-diabetic compounds.

Synthesis, crystal Structure, theoretical calculation and luminescence properties of Cu(Ⅱ), Co(Ⅱ), Ni(Ⅱ) and Zn(Ⅱ) quinolinyl benzimidazole complexes with multiple coordination number induced by proton

The innovative ligand H2L, featuring a benzimidazole structure substituted with 8-hydroxyquinoline and equipped with N,O donor sites, underwent successful synthesis and meticulous characterization. Notably, this ligand was exclusively synthesized through catalysis under protonated conditions, accompanied by an in-depth exploration of the catalytic mechanism. Employing single-crystal X-ray diffraction, we acquired and authenticated four distinct asymmetric double-decker sandwich mononuclear transition metal complexes: [Cu(HL)2]·2H2O, [Co(HL)2]·CH3OH, [Ni(HL)2] and [Zn(HL)2]·CH2Cl2. Among these, complex 1 revealed an intriguing five-coordinate Cu(II) center adopting a distorted square pyramidal geometry, whereas the central metal ions in complexes 2–4 exhibited a six-coordinate configuration, characterized by a distorted octahedral geometry. Noteworthy is the observation that the dihedral angles within the crystal structures of complexes 2–4 approached approximately 90° to a significant extent. To delve deeper into the electronic properties and transitions, meticulous DFT and TD-DFT calculations were performed on both the ligand H2L and complexes 1–4. Furthermore, a comprehensive investigation into the luminescence properties of both H2L and its complexes was conducted, revealing a pronounced luminescence quenching effect in the complexes compared to the ligand. Through thorough analysis utilizing Hirshfeld surface examination and IRI analysis, various weak intermolecular interactions within the system were elucidated.

Synthesis, crystal structure and Hirshfeld surface analysis of 1-[(1-octyl-1H-1,2,3-triazol-4-yl)methyl]-3-phenyl-1,2-di-hydro-quinoxalin-2(1H)-one.

In the title mol-ecule, C25H29N5O, the di-hydro-quinoxaline unit is not quite planar (r.m.s. deviation = 0.030 Å) as there is a dihedral angle of 2.69 (3)° between the mean planes of the constituent rings and the mol-ecule adopts a hairpin conformation. In the crystal, the polar portions of the mol-ecules are associated through C-H⋯O and C-H⋯N hydrogen bonds and C-H⋯π(ring) and C=O⋯π(ring) inter-actions, forming thick layers parallel to the bc plane and with the n-octyl groups on the outside surfaces.

The correlation of alkyl chain modulation and the efficiency of Y-series non-fullerene acceptor: A DFT approach

Y6, a highly efficient non-fullerene acceptor, could present distinctly different power conversion efficiency in organic solar cells when its alkyl side chains are replaced by others. However, the underlying mechanism is still unclear. To dissect this point, ten kinds of Y-series acceptors with variant side chains are studied. The density functional theory is used to calculate their ground geometry, frontier molecular orbital, ultraviolet–visible absorption spectra, the free energy of solvation, intramolecular electron transfer, and electronic structures on the excited state in chloroform. Results reveal that the presence of the branched R1 could reduce the dihedral angle and balance the planarity of molecular skeletons. The free energy of solvation is less than −1.5 eV and R2 has a greater impact on it than R1. Acceptors with longer R2 have better light absorption between 400 nm and 600 nm. Molecular dynamics simulation is also applied to the blending films with these acceptors and PM6. Molecules that possess branched R1 and longer R2 have a better morphology and are found to be promising candidates for highly efficient acceptors.

Pressure-Induced Enhancement of Room-Temperature Phosphorescence in Heavy Halogen-Containing Imide and Polyimide.

To investigate the correlation between the aggregated state and photoluminescence (PL) mechanism of dual fluorescent (FL) and phosphorescent (PH) polyimides (PIs), the photophysical processes of FL-type BP-PI, PH-type DBrBP-PI, and their corresponding imide model compounds (BP-MC and DBrBP-MC) dispersed in poly(methyl methacrylate) (PMMA) films were analyzed at elevated pressures up to 8 GPa using a diamond anvil cell. Dibromo-substituted DBrBP-MC demonstrated a shorter wavelength absorption than BP-MC owing to the larger dihedral angle in the biphenyl moiety. Both MCs exhibited red-shifts in their absorption spectra with increasing pressure, indicating planarization occurred at the biphenyl moieties associated with the compression of the free volume in PMMA. The PL intensity of BP-MC increased with increasing pressure, while its quantum yield (ΦPL) decreased sharply due to the enhanced energy transfer via the Förster mechanism. In contrast, the PH quantum yield (ΦPH) of DBrBP-MC monotonically increased at lower pressures, while it showed excitation wavelength-dependent behaviors at higher pressures: ΦPH remained unchanged under excitation at 340 nm but gradually increased under excitation at 365 nm. This fact suggests that, at higher pressures, 365 nm excitation promoted intersystem crossing (ISC) from excited singlet states at higher energy levels. Using this phenomenon, a significant pressure-induced PH enhancement (PIPE) was observed for DBrBP-PI up to 0.9 GPa upon excitation at 365 nm, which is a rare phenomenon for organic polymers. This study indicates that even in colorless and optically transparent amorphous polymers, an enhancement of PH due to restricted molecular motion and intensified ISC outweighs the deactivation due to intermolecular energy transfer under certain pressures, leading to an increase in ΦPH.

Ultrafine Spatial Modulation of Diazapyrene-Based Two-Dimensional Conjugated Covalent Organic Frameworks.

Tailormade bottom-up synthesis of covalent organic frameworks (COFs) from various functional building blocks offer not only tunable topology and pore size but also multidimensional properties. High crystallinity is one of the prerequisites for their structures and associated physicochemical properties. Among different π-conjugated motifs for constructing COFs, pyrene-based tetragonal structures are effective in achieving highly ordered and crystalline states. In the present research, we demonstrated that the substitution of pyrene with 2,7-diazapyrene produces nearly "flat" structures of two-dimensional (2D) COF layers by controlling the torsional angle of linker molecules. Featuring finite pore diameters and excellent thermodynamic stability of ∼500 °C, ordered face-to-face (slipped AA) stacking arrangements were produced. Extended electrical conjugation spanning 2D frames with modest optical bandgaps (Eg) of ∼2.1 eV shows the planar character of diazapyrene-based COFs. The stacking of the conjugated 2D frames with small Eg values is also beneficial for the formation of highly stable conducting pathways in the crystalline state, which was confirmed by the results of the microwave conductivity measurements. Nitrogen centers in diazapyrene units also play a key role as the active sites for proton transfer, and the maximum proton conductivity of σ = 10-2 S cm-1 was achieved along the cocontinuous nanopore structures surrounded by the active sites. Results show that tetragonal COFs based on diazapyrene can be used as a highly crystalline two-dimensional material with special electrical and proton-conducting capabilities.

Redetermined structure of 4-(benz-yloxy)benzoic acid.

In the title compound, C14H14O3, the dihedral angle between the aromatic rings is 39.76 (9)°. In the crystal, the mol-ecules associate to form centrosymmetric acid-acid dimers linked by pairwise O-H⋯O hydrogen bonds. The precision of the geometric parameters in the present single-crystal study is about an order of magnitude better than the previous powder diffraction study [Chattopadhyay et al. (2013 ▸). CrystEngComm, 15, 1077-1085].

Synthesis and crystal structure of (2E)-1-[3,5-bis-(benz-yloxy)phen-yl]-3-(4-eth-oxy-phen-yl)prop-2-en-1-one.

In the title compound, C31H28O4, the phenyl rings of the chalcone unit subtend a dihedral angle of 26.43 (10)°. The phenyl rings of the pendant benz-yloxy groups are orientated at 75.57 (13) and 75.70 (10)° with respect to their attached ring. In the crystal, weak C-H⋯O and C-H⋯π inter-actions link the mol-ecules. The inter-molecular inter-actions were qu-anti-fied and analysed using Hirshfeld surface analysis, which showed a breakdown into H⋯H (49.8%), H⋯C/C⋯H (33.8%) and H⋯O/O⋯H (13.6%) inter-actions with other types making negligible contributions.

Streamlining NMR Chemical Shift Predictions for Intrinsically Disordered Proteins: Design of Ensembles with Dimensionality Reduction and Clustering.

By merging advanced dimensionality reduction (DR) and clustering algorithm (CA) techniques, our study advances the sampling procedure for predicting NMR chemical shifts (CS) in intrinsically disordered proteins (IDPs), making a significant leap forward in the field of protein analysis/modeling. We enhance NMR CS sampling by generating clustered ensembles that accurately reflect the different properties and phenomena encapsulated by the IDP trajectories. This investigation critically assessed different rapid CS predictors, both neural network (e.g., Sparta+ and ShiftX2) and database-driven (ProCS-15), and highlighted the need for more advanced quantum calculations and the subsequent need for more tractable-sized conformational ensembles. Although neural network CS predictors outperformed ProCS-15 for all atoms, all tools showed poor agreement with HN CSs, and the neural network CS predictors were unable to capture the influence of phosphorylated residues, highly relevant for IDPs. This study also addressed the limitations of using direct clustering with collective variables, such as the widespread implementation of the GROMOS algorithm. Clustered ensembles (CEs) produced by this algorithm showed poor performance with chemical shifts compared to sequential ensembles (SEs) of similar size. Instead, we implement a multiscale DR and CA approach and explore the challenges and limitations of applying these algorithms to obtain more robust and tractable CEs. The novel feature of this investigation is the use of solvent-accessible surface area (SASA) as one of the fingerprints for DR alongside previously investigated α carbon distance/angles or ϕ/ψ dihedral angles. The ensembles produced with SASA tSNE DR produced CEs better aligned with the experimental CS of between 0.17 and 0.36 r2 (0.18-0.26 ppm) depending on the system and replicate. Furthermore, this technique produced CEs with better agreement than traditional SEs in 85.7% of all ensemble sizes. This study investigates the quality of ensembles produced based on different input features, comparing latent spaces produced by linear vs nonlinear DR techniques and a novel integrated silhouette score scanning protocol for tSNE DR.

Manganese (III) Compounds Derived from R-Salicylaldoxime and 9-Anthracenecarboxylate Ligands: A Study of Their Synthesis and Structural, Magnetic, and Luminescent Properties

The reaction of Mn(II) salts in the air with different R-salicylaldehyde oximes and the sodium or cesium salts of 9-anthracenecarboxylato (9-AC) allows for the isolation of new six polynuclear compounds: [Mn3NaO(salox)3(9-AC)2(EtOH)3H2O]n·2EtOH (1), [Mn3NaO(3-Me-salox)3(9-AC)2(EtOH)3H2O]n·EtOH (2), [Mn6O2(salox)6(9-AC)2(EtOH)2(H2O)2]·3EtOH (3), [Mn3O(3-Me-salox)3(9-AC)(EtOH)3(H2O)]·1.8EtOH·3H2O (4), [Mn6O2(Me-salox)6(9-AC)2(EtOH)4(H2O)2]·0.5H2O (5), and [Mn6O2(Et-salox)6(9-AC)2(EtOH)4(H2O)2]·3EtOH (6). H2salox is a salicylaldehyde oxime, H2(3-Me-salox) is a 3-methyl-salicylaldehyde oxime, H2Me-salox is a 1-(2-hydroxyphenyl)ethan-1-one oxime and a H2-Et-salox is 1-(2-hydroxyphenyl)propan-1-one oxime. Structurally, compounds 1 and 2 consist of chains of trinuclear {MnIII3(μ3-O)(salox)3}+ units connected by Na+ ions. Compounds 3, 5, and 6 are hexanuclear units formed by two parallel trinuclear units {MnIII3(μ3-O)(salox)3}+ or {MnIII3(μ3-O)(Me-salox)3}+ planes related through an inversion center. Compound 4 consists of two isolated [Mn3O(3-Me-salox)3(9-AC)(EtOH)3(H2O)] trinuclear molecules in the unit cell showing crystallographic differences. Magnetic studies reveal a set of antiferromagnetic interactions in compounds 1 and 2 and a combination of antiferromagnetic and ferromagnetic interactions in compounds 3, 5, and 6. In all cases, the magneto-structural correlation between the intramolecular MnIII-N-O-MnIII torsion angle and the magnetic exchange within these units have been confirmed. For compounds 5 and 6, ac magnetic measurements reveal the slow relaxation of magnetization with moderate energy barriers of 19.9 cm−1 and 31.1 cm−1, respectively. Absorbance and fluorescence measurements in solution show the transitions of the 9-anthracenecarboxylate chromophore for all the compounds.

Dihedral Angles and Photoluminescence Quantum Yields: An NMR Analysis.

The synthesis of two different series of donor-acceptor (D-A) molecules is reported, consisting of a series of four structurally related donors and two different acceptors. The subtle differences in the electron density of these D-A-D and D-A compounds are clearly reflected in the different chemical shifts of certain donor protons in the 1H NMR spectra. These shifts show a cosine squared correlation of the dihedral angle between the donor units and the neighbouring phenyl unit of the acceptor. This correlation is also related to optical properties such as the photoluminescence quantum yield, which shows a similar trend due to the different degree of charge transfer during excitation and relaxation processes. In this way, it is possible to directly correlate a molecular structural parameter with a material property on a purely experimental basis, which should be applicable to many donor-acceptor systems.

Conjugated Nitroxide Radical Polymer with Low Temperature Tolerance Potential for High-Performance Organic Polymer Cathode.

Low-temperature operation poses a significant challenge for current commercial rechargeable lithium-ion batteries (LIBs). Organic polymer electrode materials, exhibiting a nonintercalation redox mechanism, offer a viable solution to mitigate the decline in electrochemical performance at low temperatures in LIBs. Herein, a radical polymer P(DATPAPO-TPA) with a conjugated nitrogen-rich triphenylamine derivative as the backbone and high-density nitroxide pendants has been synthesized. Due to the large interstitial spaces between adjacent structural units and polymer chains, resulting from the significant torsion angle between the benzene rings in the P(DATPAPO-TPA) skeleton, ions could effectively transport. This structural feature demonstrated a notable discharge capacity of 143.3 mA h·g-1 and a high charge-discharge plateau at ∼3.75 V vs Li+/Li, outperforming most reported radical polymer cathode materials. In addition, its capacity retention could reach 83.1% after 2000 cycles at an ultrahigh current density of 50 C, showing excellent rate capability and promising cyclability. Also notable was P(DATPAPO-TPA)'s favorable low-temperature performance that maintains a high discharge capacity of 139.2 mA h·g-1 at 0 °C. The synthesized P(DATPAPO-TPA) is a tangible illustration of a viable design strategy for low-temperature electrode materials, thereby contributing to broadening applications for radical polymer electrode materials.

Unraveling Stereochemical Structure-Activity Relationships of Sesquiterpene Lactones for Inhibitory Effects on STAT3 Activation.

Sesquiterpene lactones, a class of natural compounds abundant in the Asteraceae family, have gained attention owing to their diverse biological activities, and particularly their anti-proliferative effects on human cancer cells. In this study, we systematically investigated the structure-activity relationship of ten sesquiterpene lactones with the aim of elucidating the structural determinants for the STAT3 inhibition governing their anti-proliferative effects. Our findings revealed a significant correlation between the STAT3 inhibitory activity and the anti-proliferative effects of sesquiterpene lactones in MDA-MB-231 breast cancer cell lines. Among the compounds tested, alantolactone and isoalantolactone emerged as the most potent STAT3 inhibitors, highlighting their potential as candidates for anticancer drug development. Through protein-ligand docking studies, we revealed the structural basis of STAT3 inhibition by sesquiterpene lactones, emphasizing the critical role of hydrogen-bonding interactions with key residues, including Arg609, Ser611, Glu612, and Ser613, in the SH2 domain of STAT3. Furthermore, our conformational analysis revealed the decisive role of the torsion angle within the geometry-optimized structures of sesquiterpene lactones in their STAT3 inhibitory activity (R=0.80, p<0.01). These findings not only provide preclinical evidence for sesquiterpene lactones as promising phytomedicines against diseases associated with abnormal STAT3 activation, but also highlight the importance of stereochemical aspects in their activity.

Enhanced torsional strength and plasticity synergy of multi-component alloy via multi-level gradient structures

This study investigates an approach to enhance the strength and torsional angle, as well as analyze the microstructure and mechanical properties of a multi-component Cu-based alloy. A unique gradient-structured alloy is successfully synthesized by subjecting CuAl10Fe5Ni4Mn0.23 to high-frequency large torsional deformation. The results showed that the multi-level gradient structure due to high-frequency deformation significantly enhances the torsional strength of CuAl10Fe5Ni4Mn0.23 alloy. With a torsional rate of 120°/min and a maximum torsional angle achieved at 40°, after 200 cycles, compared to non-torsional samples, the torsional strength increased by 75.69 % and the torsion angle also increased by 38.36 %. The combination of the alloy primary structures along with gradient structures forms a new microband structure that synergistically improves the mechanical properties of multi-component alloys. The proposed large torsion deformation alters the structure of multi-component alloys, resulting in a gradient structure that simultaneously enhances both strength and plasticity, resolving current reciprocal dilemmas between these two factors.