THz Frequency Comb Research Articles

THz frequency combs form dispersion-compensated antenna-coupled ring quantum cascade lasers

We report comb operation of RF injected ring Quantum Cascade Lasers. A coupled waveguide approach is implemented for dispersion compensation while passive bullseye antenna improves the device power extraction and far field. Phase sensitive measurements are presented which hints at the presence of soliton state.

Regenerative terahertz quantum detectors

Because of the ultrafast and photon-driven nature of the transport in their active region, we demonstrate that quantum cascade lasers can be operated as resonantly amplified terahertz detectors with wide RF bandwidth. Tunable responsivities up to 50 V/W and noise equivalent powers down to 100 pW/Hz1/2 are demonstrated at 4.7 THz. Constant peak responsivities with respect to the detector temperature are observed up to 80 K. Thanks to the ≈ps intersub-band lifetime, electrical bandwidths larger than 20 GHz can be obtained, allowing the detection of optical beatnotes from quantum cascade THz frequency combs.

Direct Observation of Terahertz Frequency Comb Generation in Difference-Frequency Quantum Cascade Lasers

Terahertz quantum cascade laser sources based on intra-cavity difference frequency generation from mid-IR devices are an important asset for applications in rotational molecular spectroscopy and sensing, being the only electrically pumped device able to operate in the 0.6–6 THz range without the need of bulky and expensive liquid helium cooling. Here we present comb operation obtained by intra-cavity mixing of a distributed feedback laser at λ = 6.5 μm and a Fabry–Pérot device at around λ = 6.9 μm. The resulting ultra-broadband THz emission extends from 1.8 to 3.3 THz, with a total output power of 8 μW at 78 K. The THz emission has been characterized by multi-heterodyne detection with a primary frequency standard referenced THz comb, obtained by optical rectification of near infrared pulses. The down-converted beatnotes, simultaneously acquired, confirm an equally spaced THz emission down to 1 MHz accuracy. In the future, this setup can be used for Fourier transform based evaluation of the phase relation among the emitted THz modes, paving the way to room-temperature, compact, and field-deployable metrological grade THz frequency combs.

Quantum cascade laser based hybrid dual comb spectrometer

Four-wave-mixing-based quantum cascade laser frequency combs (QCL-FC) are a powerful photonic tool, driving a recent revolution in major molecular fingerprint regions, i.e. mid- and far-infrared domains. Their compact and frequency-agile design, together with their high optical power and spectral purity, promise to deliver an all-in-one source for the most challenging spectroscopic applications. Here, we demonstrate a metrological-grade hybrid dual comb spectrometer, combining the advantages of a THz QCL-FC with the accuracy and absolute frequency referencing provided by a free-standing, optically-rectified THz frequency comb. A proof-of-principle application to methanol molecular transitions is presented. The multi-heterodyne molecular spectra retrieved provide state-of-the-art results in line-center determination, achieving the same precision as currently available molecular databases. The devised setup provides a solid platform for a new generation of THz spectrometers, paving the way to more refined and sophisticated systems exploiting full phase control of QCL-FCs, or Doppler-free spectroscopic schemes.

On-chip mid-infrared and THz frequency combs for spectroscopy

Frequency combs have revolutionized time and frequency metrology and in recent years, new frequency comb lasers that are highly compact or even on-chip have been demonstrated in the mid-infrared and THz regions of the electromagnetic spectrum. The emerging technologies include electrically pumped quantum and interband cascade semiconductor devices, as well as high-quality factor microresonators. In this guest editorial, the authors summarize recent advances in the field, the potential for rapid broadband spectroscopy, as well as the challenges and prospects for use in molecular gas sensing.

Off-axis terahertz parametric oscillator

We study an off-axis terahertz (THz) parametric oscillator and show its superior performance over a conventional THz parametric oscillator. Furthermore, by pumping an off-axis lithium-niobate oscillator with a pulsed Nd:YAG laser having an axial-mode spacing matched to the THz oscillator’s mode spacing, we generated an ultra-broad red-shifted frequency comb between 1065 and 1085 nm at the output, which corresponds to a four-octave-spanning THz-frequency comb in the idler spectrum. We also demonstrated a signal-seeded off-axis THz parametric oscillator, which generates 8 nJ narrow-line radiation at 2.1 THz and achieved 46% pump depletion in a 6.5 cm long crystal with only 4 mJ pump energy in a 460 ps pump pulse width. Furthermore, tuning between 3.6 and 4.9 THz for the generated radiation is also demonstrated in this work.

Terabit optical OFDM superchannel transmission via coherent carriers of a hybrid chip-scale soliton frequency comb.

We demonstrate seamless channel multiplexing and high bitrate superchannel transmission of coherent optical orthogonal frequency division multiplexing (CO-OFDM) data signals utilizing a dissipative Kerr soliton (DKS) frequency comb generated in an on-chip microcavity. Aided by comb line multiplication through Nyquist pulse modulation, the high stability and mutual coherence among mode-locked Kerr comb lines are exploited for the first time, to the best of our knowledge, to eliminate the guard intervals between communication channels and achieve full spectral density bandwidth utilization. Spectral efficiency as high as 2.625bit/Hz/s is obtained for 180 CO-OFDM bands encoded with 12.75Gbaud 8-QAM data, adding to the total bitrate of 6.885Tb/s within a 2.295THz frequency comb bandwidth. This Letter confirms that high coherence is the key superiority of Kerr soliton frequency combs over independent laser diodes, as a multi-spectral coherent laser source for high-bandwidth high-spectral-density transmission networks.

A decade-spanning high-resolution asynchronous optical sampling terahertz time-domain and frequency comb spectrometer.

We present the design and capabilities of a high-resolution, decade-spanning ASynchronous OPtical Sampling (ASOPS)-based TeraHertz Time-Domain Spectroscopy (THz-TDS) instrument. Our system employs dual mode-locked femtosecond Ti:Sapphire oscillators with repetition rates offset locked at 100 Hz via a Phase-Locked Loop (PLL) operating at the 60th harmonic of the ∼80 MHz oscillator repetition rates. The respective time delays of the individual laser pulses are scanned across a 12.5 ns window in a laboratory scan time of 10 ms, supporting a time delay resolution as fine as 15.6 fs. The repetition rate of the pump oscillator is synchronized to a Rb frequency standard via a PLL operating at the 12th harmonic of the oscillator repetition rate, achieving milliHertz (mHz) stability. We characterize the timing jitter of the system using an air-spaced etalon, an optical cross correlator, and the phase noise spectrum of the PLL. Spectroscopic applications of ASOPS-THz-TDS are demonstrated by measuring water vapor absorption lines from 0.55 to 3.35 THz and acetonitrile absorption lines from 0.13 to 1.39 THz in a short pathlength gas cell. With 70 min of data acquisition, a 50 dB signal-to-noise ratio is achieved. The achieved root-mean-square deviation is 14.6 MHz, with a mean deviation of 11.6 MHz, for the measured water line center frequencies as compared to the JPL molecular spectroscopy database. Further, with the same instrument and data acquisition hardware, we use the ability to control the repetition rate of the pump oscillator to enable THz frequency comb spectroscopy (THz-FCS). Here, a frequency comb with a tooth width of 5 MHz is generated and used to fully resolve the pure rotational spectrum of acetonitrile with Doppler-limited precision. The oscillator repetition rate stability achieved by our PLL lock circuits enables sub-MHz tooth width generation, if desired. This instrument provides unprecedented decade-spanning, tunable resolution, from 80 MHz down to sub-MHz, and heralds a new generation of gas-phase spectroscopic tools in the THz region.

Octave-spanning semiconductor laser

We present here a semiconductor injection laser operating in continuous wave with an emission covering more than one octave in frequency, and displaying homogeneous power distribution among the lasing modes. The gain medium is based on a heterogeneous quantum cascade structure operating in the THz range. Laser emission in continuous wave takes place from 1.64 THz to 3.35 THz with optical powers in the mW range and more than 80 modes above threshold. Free-running beatnote investigations on narrow waveguides with linewidths of 980 Hz limited by jitter indicate frequency comb operation on a spectral bandwidth as wide as 624 GHz, making such devices ideal candidates for octave-spanning semiconductor-laser-based THz frequency combs.

Phase-slope and phase measurements of tunable CW-THz radiation with terahertz comb for wide-dynamic-range, high-resolution, distance measurement of optically rough object.

Phase measurement of continuous-wave terahertz (CW-THz) radiation is a potential tool for direct distance and imaging measurement of optically rough objects due to its high robustness to optical rough surfaces. However, the 2π phase ambiguity in the phase measurement of single-frequency CW-THz radiation limits the dynamic range of the measured distance to the order of the wavelength used. In this article, phase-slope measurement of tunable CW-THz radiation with a THz frequency comb was effectively used to extend the dynamic range up to 1.834 m while maintaining an error of a few tens µm in the distance measurement of an optically rough object. Furthermore, a combination of phase-slope measurement of tunable CW-THz radiation and phase measurement of single-frequency CW-THz radiation enhanced the distance error to a few µm within the dynamic range of 1.834 m without any influence from the 2π phase ambiguity. The proposed method will be a powerful tool for the construction and maintenance of large-scale structures covered with optically rough surfaces.

Terahertz Frequency Combs

We review recent work on THz frequency combs generated by femtosecond lasers. An overview about the underlying theory and application examples for the analysis of THz signals are given. Using different optoelectronic detection methods, spatially resolved measurements of frequency, phase, and amplitude of GHz and THz emitters are presented. The measurement setup allows for high-precision measurements of the frequency (accuracy of 9 · 10− 14within a 10 s measurement interval), relative amplitude (standard deviation of the mean 0.1 %) and phase (standard deviation of the mean 0.2°). Moreover, the accuracy and invasiveness of different optoelectronic techniques are compared. The large spectral coverage provided by THz frequency combs is demonstrated by simultaneously measuring signals at 16 GHz and 28 THz.

Frequency comb generation at terahertz frequencies by coherent phonon excitation in silicon

High-order nonlinear light-matter interactions in gases enable generation of x-ray and attosecond light pulses, metrology, and spectroscopy. Optical nonlinearities in solid-state materials are particularly interesting for combining optical and electronic functions for high-bandwidth information processing. Third-order nonlinear optical processes in silicon have been used to process optical signals with greater than 1 GHz bandwidths. Fundamental physical processes for a Si-based optical modulator in the THz bandwidth range, however, have not yet been explored. Here we demonstrate ultrafast phononic modulation of the optical index of Si by irradiation with intense few-cycle femtosecond pulses. The anisotropic reflectivity modulation by the resonant Raman susceptibility at the fundamental frequency of the longitudinal optical (LO) phonon of Si (15.6 THz) generates a frequency comb up to 7th-order. All optical >100 THz frequency comb generation is realized by harnessing the coherent atomic motion of the Si crystalline lattice at its highest mechanical frequency.

Analysis on characteristic and application of THz frequency comb and THz sub-comb

In this paper, we proposed a method for THz sub-comb generation based on spectral interference. The result of our calculation indicated that the THz pulse train, generated by surface-emitted optical rectification of femtosecond (fs) laser pulse in periodically poled lithium niobate (PPLN), has a comb-like spectrum. The characteristic of this THz sub-comb was analyzed both in frequency and time domain. Compared with the THz frequency comb emitted by a photoconductive antenna (PCA), THz sub-comb has a lower spectral resolution and wider free spectral range. Thus it could be an ideal source for wavelength division multiplexing (WDM) in THz wireless communication system.