Three-dimensional Covalent Organic Frameworks Research Articles

Assembly of Dye Molecules in Covalent Organic Frameworks for Enhanced Colorimetric Biosensing.

Colorimetric assays have been extensively investigated for biosensing applications due to their advantages of visual recognizability, ease of use, and low cost. However, advancing their development is a great challenge due to the inherent limitations of colorimetric dyes. Herein, we report a strategy to assemble dyes in covalent organic frameworks (COFs) to effectively reinforce the applicability of pH-responsive dyes in colorimetric bioassays. Experimental results reveal that three-dimensional COFs can promote the assembly of dyes through hydrogen bonding, resulting in the formation of a dye-supermolecule@COF assembly. Consequently, when sensitized at increased pH levels (e.g., hydroxyl ions), disruption of hydrogen bonds may trigger a rapid transition from their insoluble fixed state within the COFs into soluble, visibly detectable dye anions. This process can also be facilitated by increased hydrophilicity and elevated electrostatic repulsion between the dye anions and COFs, leading to the substantial release of chromogenic dye anions from the COF pores into the solution, thereby amplifying the colorimetric signal output. Therefore, by employing various synthesized dye-supermolecule@COFs as signal tags, we developed a colorimetric bioassay capable of accurately identifying breast cancer cell subtypes. This study not only highlights the effectiveness of dye-supermolecule@COFs in enhancing colorimetric biosensing but also underscores the potential of employing the COF-mediated dye assembly strategy for colorimetric assays.

Determination of fluoroquinolones residues in bean sprouts using covalent organic framework based solid-phase extraction coupled with UHPLC-MS/MS

A solid-phase extraction (SPE) method using three-dimensional covalent organic framework (COFs) coupled with ultra-high performance liquid chromatography-mass spectrometry was developed for the detection of 13 fluoroquinolones (FQs) in bean sprout samples. Critical extraction parameters influencing SPE efficiency were optimized and matrix-matched standard curves were used to eliminate matrix effects and validate the proposed method. The analytical method proved to have good linearity in the concentration range of 1.0–100 μg L–1 with correlation coefficients of r≥0.9995. The limits of detection were 0.10–0.45 μg kg–1, whereas the limits of quantification were 0.34–1.51 μg kg–1. The recoveries ranged from 92.7 % to 105 % with satisfactory precision (< 4.82 %). The COFs-packed SPE cartridge maintained recovery efficiency for the target FQs over five reuse cycles. The adsorption selectivity was mainly attributed to π–π interactions, hydrogen bonding, and electrostatic attraction between FQs and the adsorbent. Analysis of actual samples revealed the presence of enrofloxacin, ciprofloxacin, and norfloxacin in three batches of bean sprout samples. These results highlight the importance of monitoring antibiotics residues in bean sprouts.

A cationic three-dimensional covalent organic framework membrane for nanofiltration of molecules and rare Earth ions

Permanently microporous materials have evolved as focal point of research for tackling issues in separation science and membrane technology. Covalent organic frameworks (COFs) stand out for their distinctive synergy of crystalline nature, uniform channels, and structural diversities. Three-dimensional (3D) COFs, distinguished by angstrom-sized and interconnected channels, hold special promise for separating small targets; however, this potential remains underexplored. Here, we report feasible growth of cationic 3D COF membranes on a flexible polymer substrate for versatile nanofiltration toward both molecules and ions. Through comprehensive performance evaluations, we reveal that the resultant membrane exhibits durable and prominent molecular selectivity to separate fine species with molecular weights above 300 g mol−1 at fast methanol permeation. Lanthanide ions of industrial value also can be harvested by the membrane with rejection rates of up to 91.4%. Together with its nonselectivity to competing ions, our membrane implements efficient extraction of rare earth elements from ion mixtures. These findings illuminate the potential of 3D COFs for liquid separation and offer a solution to building versatile membranes.

Design of Three-Dimensional Mesoporous Adamantane-Based Covalent Organic Framework with Exceptionally High Surface Areas.

The development of three-dimensional (3D) covalent organic frameworks (COFs) with large pores and high specific surface areas is of critical for practical applications. However, it remains a tremendous challenge to reconcile the contradiction between high porosity and high specific surface areas, and increasing the length of building blocks leads to structural interpenetration in 3D COFs. Here, we report the preparation of mesoporous three-dimensional COF by a new steric hindrance engineering method. By incorporating adamantane into the monomers instead of carbon centers, we successfully achieve 2-fold interpenetrated diamondoid-structured 3D COFs, featuring permanent mesopores (up to 33 Å), exceptionally high surface areas (>3400 m2 g-1), and low crystal densities (0.123 g cm-3). These properties far surpass those of most conventional 3D COFs with similar topologies. This work not only aims to construct 3D COFs with low interpenetration but also to establish a foundation for the systematic design and structural control of 3D COFs.

External surface hydrophilic 3D-POSS-COF@GDL for the direct adsorption of bisphenols in milk samples

In case of organic frameworks (COFs) as adsorbents in the pretreatment of complex food matrices, challenges such as poor dispersion and non-specific adsorption of interfering macromolecules like proteins are often encountered. To address this issue, this work prepared a three-dimensional covalent organic framework (3D-COF) with a novel bcu topology based on polyhedral oligomeric silsesquioxane (POSS). Subsequently, gluconolactone (GDL) was modified onto the external surface of the material via the reaction with the exposed reactive residues. The resulting POSS-COF@GDL adsorbent has an enhanced hydrophilicity in the external surface, thereby significantly improves the dispersion of materials in aqueous solution and reduces the adsorption ability toward protein. Whereas, the inner of material retains hydrophobic pores that exhibit high adsorption efficiency to small hydrophobic molecules. Compared with the traditional pretreatment methods, POSS-COF@GDL can directly extract bisphenols (BPs) in milk samples without any additional treatment. The established sample pretreatment method is coupled with high-performance liquid chromatography-ultraviolet detection (HPLC-UV), resulting in recoveries of 71.8 to 93.6%, intra- and inter-day relative standard deviations (RSDs) of <8.3%, and limits of detection (LODs) of 0.042–0.16 ng∙mL−1 for four BPs.

Piezofluorochromism in Covalent Organic Frameworks: Pressure-Induced Emission Enhancement and Blue-Shifted Emission.

Achieving enhanced or blue-shifted emission from piezochromic materials remains a major challenge. Covalent organic frameworks (COFs) are promising candidates for the development of piezochromic materials owing to their dynamic structures and adjustable optical properties, where the emission behaviors are not solely determined by the functional groups, but are also greatly influenced by the specific geometric arrangement. Nevertheless, this area remains relatively understudied. In this study, a successful synthesis of a series of bicarbazole-based COFs with varying topologies, dimensions, and linkages was conducted, followed by an investigation of their structural and emission properties under hydrostatic pressure generated by a diamond anvil cell. Consequently, these COFs exhibited distinct piezochromic behaviors, particularly a remarkable pressure-induced emission enhancement (PIEE) phenomenon with a 16-fold increase in fluorescence intensity from three-dimensional COFs, surpassing the performance of CPMs and most organic small molecules with PIEE behavior. On the contrary, three two-dimensional COFs with flexible structures exhibited rare blue-shifted emission, whereas the variants with rigid and conjugated structures showed common red-shifted and reduced emission. Mechanism research further revealed that these different piezochromic behaviors were primarily determined by interlayer distance and interaction. This study represents the first systematic exploration of the structures and emission properties of COFs through pressure-treated engineering and provides a new perspective on the design of piezochromic materials.

Controlling the Degree of Interpenetration in Chiral Three-Dimensional Covalent Organic Frameworks via Steric Tuning.

Network interpenetration plays a crucial role in functionalizing porous framework materials. However, controlling the degree of interpenetration in covalent organic frameworks (COFs) to influence their pore sizes, shapes, and functionalities still remains a significant challenge. Here, we demonstrate a steric tuning strategy to control the degree of COF interpenetration and modulate their physicochemical properties. By imine condensations of 1,1'-bi-2-naphthol-derived tetraaldehydes bearing different alkyl substituents with the monomer tetra(p-aminophenyl)-methane, we synthesized and characterized a family of two-component and three-component chiral COFs with different interpenetrated dia networks. The alkyl groups are periodically appended on the pore walls, and their types/contents that can be synthetically tuned control the interpenetration degree of COFs by minimizing repulsive interactions between the alkyl groups. Specifically, the COF with -OH groups adopts an interpenetrated dia-c5 topology, those with -OMe/-OEt groups take an interpenetrated dia-c4 topology, whereas those with the bulky -OnPr/-OnBu groups exhibit a noninterpenetrated dia-c1 topology. The multivariate COFs with both -OH and -OnBu groups display either a noninterpenetrated or dia-c5 topology, depending on the proportion of -OnBu groups. The extent of interpenetration in COFs significantly affects their porosity, thermal stability, and chemical stability, resulting in varying selective performances in the adsorption and separation of dyes and asymmetric catalysis. This work highlights the potential of using steric hindrance to tune and control interpenetration, porosity, stability, and functionalities of COFs materials, broadening the range of their applications.

Stepwise Protonation of Three-Dimensional Covalent Organic Frameworks for Enhancing Hydrogen Peroxide Photosynthesis.

Three-dimensional covalent organic frameworks (3D COFs), recognized for their tailorable structures and accessible active sites, offer a promising platform for developing advanced photocatalysts. However, the difficulty in the synthesis and functionalization of 3D COFs hinders their further development. In this study, we present a series of 3D-bcu-COFs with 8 connected porphyrin units linked by linear linkers through imine bonds as a versatile platform for photocatalyst design. The photoresponse of 3D-bcu-COFs was initially modulated by functionalizing linear linkers with benzo-thiadiazole or benzo-selenadiazole groups. Furthermore, taking advantage of the well-exposed porphyrin and imine sites in 3D-bcu-COFs, their photocatalytic activity was optimized by stepwise protonation of imine bonds and porphyrin centers. The dual protonated COF with benzo-selenadiazole groups exhibited enhanced charge separation, leading to an increased photocatalytic H2O2 production under visible light. This enhancement demonstrates the combined benefits of linker functionalization and stepwise protonation on photocatalytic efficiency.

Highly Selective Separation of Benzene/Cyclohexane by Three-Dimensional Covalent Organic Framework with 8,8-Connected bcu Net Topology

Highly Selective Separation of Benzene/Cyclohexane by Three-Dimensional Covalent Organic Framework with 8,8-Connected bcu Net Topology

Advancements and applications of three-dimensional covalent organic frameworks

Covalent organic frameworks (COFs) represent an emerging class of crystalline porous polymers characterized by their pre-designed interconnected structures formed via dynamic covalent bonds. These materials have garnered widespread attention in recent years. While applications of two-dimensional (2D) COFs have been extensively investigated since 2005, their practicality has been impeded by their limited specific surface area and the robust π-π stacking interaction. In contrast, three-dimensional (3D) COFs boast enhanced porosity, larger specific surface area, well-exposed functional groups, and an abundance of reaction sites, positioning them at the forefront of porous material research. They find extensive applications in diverse fields, including adsorption, separation, catalysis, and so on. This featured article provides a comprehensive exploration of the latest advancements in 3D COFs across their respective application domains. Additionally, we outline the current challenges that must be addressed and shed light on the promising prospects for the utilization of 3D COFs.

Unprecedented POSS-Linked 3D Covalent Organic Frameworks with 2-Fold Interpenetrated scu or sqc Topology Regulated by Porphyrin Center for Photocatalytic CO2 Reduction.

The synthesis and characterization of porphyrin center regulated three-dimensional covalent organic frameworks (COFs) with 2-fold interpenetrated scu or sqc topology have been investigated. These COFs exhibit unique structural features and properties, making them promising candidates for photocatalytic applications in CO2 reduction and artemisinin synthesis. The porphyrin center serves as an anchor for metal ions, allowing precise control over structures and functions of the frameworks. Furthermore, the metal coordination within the framework imparts desirable catalytic properties, enabling their potential use in photocatalytic reactions. Overall, these porphyrin center regulated metal-controlled COFs offer exciting opportunities for the development of advanced materials with tailored functionalities.

Targeted synthesis of a 3D covalent organic framework with fjh topology exhibiting high photoluminescence: A robust platform for sensitive detection of furantoin

The inappropriate use of antibiotics poses significant risks to both the environment and human health, necessitating the development of accurate and sensitive detection methods. Fluorescence detection, particularly utilizing three-dimensional (3D) covalent organic frameworks (COFs), stands out as a promising avenue. Unlike two-dimensional COFs, 3D COFs can mitigate fluorescence quenching resulting from non-radiative energy loss, primarily attributed to π-π interlayer stacking. In this study, by carefully selecting and designing the building blocks, we synthesized a 3D COF named PyTTA-TTFB-COF with fjh topology and remarkable photoluminescence. This was achieved through the combination of a 4-connected square chromophore, 1,3,6,8-Tetrakis(4-aminophenyl) pyrene, with a 3-connected triangle, 1,3,5-trimethyl-2,4,6-tris(4-formylphenyl) benzene, possessing a specific stereo conformation. Significantly, PyTTA-TTFB-COF exhibits a high photoluminescence quantum yield, notably reaching 60.1% in acetonitrile. Moreover, it displays substantial fluorescence quenching when exposed to furantoin, surpassing the performance observed with other antibiotics. Competitive experiments have confirmed that PyTTA-TTFB-COF can serve as a specific fluorescent probe for the interference-free detection of furantoin.

Engineering of molecularly imprinted cavity within 3D covalent organic frameworks: An innovation for enhanced extraction and removal of microcystins

The scarcity of selective adsorbents for efficient extraction and removal of microcystins (MCs) from complex samples greatly limits the precise detection and effective control of MCs. Three-dimensional covalent organic frameworks (3D COFs), characterized by their large specific surface areas and highly ordered rigid structure, are promising candidates, but suffer from lack of specific recognition. Herein, we design to engineer molecularly imprinted cavities within 3D COFs via molecularly imprinted technology, creating a novel adsorbent with exceptional selectivity, kinetics and capacity for the efficient extraction and removal of MCs. As proof-of-concept, a new CC bond-containing 3D COF, designated JNU-7, is designed and prepared for copolymerization with methacrylic acid, the pseudo template L-arginine and ethylene dimethacrylate to yield the JNU-7 based molecularly imprinted polymer (JNU-7-MIP). The JNU-7-MIP exhibits a great adsorption capacity (156 mg g−1) for L-arginine. Subsequently, the JNU-7-MIP based solid-phase extraction coupled with high performance liquid chromatography-mass spectrometry achieves low detection limit of 0.008 ng mL−1, wide linear range of 0.025–100 ng mL−1, high enrichment factor of 186, rapid extraction of 10 min, and good recoveries of 92.4%−106.5% for MC-LR. Moreover, the JNU-7-MIP can rapidly remove the MC-LR from 1 mg L−1 to levels (0.26–0.35 μg L−1) lower than the WHO recommended limit for drinking water (1 μg L−1). This work reveals the considerable potential of 3D COF based MIPs as promising adsorbents for the extraction and removal of contaminants in complex real samples.

Gas-Triggered Gate-Opening in a Flexible Three-Dimensional Covalent Organic Framework.

The development of novel soft porous crystals (SPCs) that can be transformed from nonporous to porous crystals is significant because of their promising applications in gas storage and separation. Herein, we systematically investigated for the first time the gas-triggered gate-opening behavior of three-dimensional covalent organic frameworks (3D COFs) with flexible building blocks. FCOF-5, a 3D COF containing C-O single bonds in the backbone, exhibits a unique "S-shaped" isotherm for various gases, such as CO2, C2, and C3 hydrocarbons. According to in situ characterization, FCOF-5 undergoes a pressure-induced closed-to-open structural transition due to the rotation of flexible C-O single bonds in the framework. Furthermore, the gated hysteretic sorption property of FCOF-5 can enable its use as an absorbent for the efficient removal of C3H4 from C3H4/C3H6 mixtures. Therefore, 3D COFs synthesized from flexible building blocks represent a new type of SPC with gate-opening characteristics. This study will strongly inspire us to design other 3D COF-based SPCs for interesting applications in the future.

Preparation of self-standing ultra-thin three-dimensional covalent organic frameworks by interfacial polymerization for dye separation

Three-dimensional covalent organic frameworks (3D COFs) have garnered considerable attention in the adsorption of small molecules owing to their unique 3D pore structure and easily modifiable functional group sites. However, most 3D COFs exhibit lattice interpenetration, making the membrane fabrication process difficult. Most 3D COFs are prepared as powders using solvothermal methods, which severely limits their application in material separation. Therefore, self-supporting 3D COFs membranes were fabricated using room-temperature interfacial polymerization, a low-energy method. Traditional alkane/water interfacial polymerization methods have disadvantages such as poor water solubility of the monomer, volatile solvents, and low crystallinity. Herein, an imine-linked, self-standing, 3D COFs membrane with an ultrathin layer was engineered at the alkane/ionic liquid interface. Owing to the improved crystalline structure, which exposed a large number of imine-linked sites within a 3D pore channel, the constructed 3D COFs membrane exhibited a high Brunauer–Emmett–Teller surface area of 1061.4 m2·g−1 and high water flux of approximately 76 L·m−2 h−1 bar−1 and demonstrated excellent rejection rates of 97.76% and 95.36% for two cationic dyes, rhodamine B and methylene blue, respectively. The membrane exhibited high rejection rates after seven testing cycles. This study reveals the great potential of self-standing 3D COFs membranes as dye separation.

Fine-tuning the pore environment of ultramicroporous three-dimensional covalent organic frameworks for efficient one-step ethylene purification

The construction of functional three-dimensional covalent organic frameworks (3D COFs) for gas separation, specifically for the efficient removal of ethane (C2H6) from ethylene (C2H4), is significant but challenging due to their similar physicochemical properties. In this study, we demonstrate fine-tuning the pore environment of ultramicroporous 3D COFs to achieve efficient one-step C2H4 purification. By choosing our previously reported 3D-TPB-COF-H as a reference material, we rationally design and synthesize an isostructural 3D COF (3D-TPP-COF) containing pyridine units. Impressively, compared with 3D-TPB-COF-H, 3D-TPP-COF exhibits both high C2H6 adsorption capacity (110.4 cm3 g−1 at 293 K and 1 bar) and good C2H6/C2H4 selectivity (1.8), due to the formation of additional C-H···N interactions between pyridine groups and C2H6. To our knowledge, this performance surpasses all other reported COFs and is even comparable to some benchmark porous materials. In addition, dynamic breakthrough experiments reveal that 3D-TPP-COF can be used as a robust absorbent to produce high-purity C2H4 directly from a C2H6/C2H4 mixture. This study provides important guidance for the rational design of 3D COFs for efficient gas separation.

The strategy of three-dimensional Covalent Organic Frameworks to exclude dye contaminants in aqueous solutions

The development of effective solid adsorbents is necessary to remove organic pollutants from wastewater in response to the global water crisis. The present study investigates the adsorption behavior of dye pollutants on a 1, 3, 6, 8-tetrakis (4formylphenyl) pyrene (TFPPy) for the self-assembly of an innovative three-dimensional (3D) covalent organic frameworks (COFs). Molecular dynamics (MD) and the well-tempered metadynamics simulation were used to evaluate the ability of COFs to adsorb seven types of dye pollutants (DPs). These include methyl orange (MO), gentian violet (GV), brilliant green (BG), tolonium chloride (TC), methylene blue (MB), anionic congo red (CR), and rhodamine B (Rh B). To examine this process, several descriptors are calculated from the simulation trajectories, including interaction energies, root-mean-square deviation, radial distribution function, solvent-accessible surface area, mean square displacement, and the number of hydrogen bonds to figure out the process. After analyzing the data, it was found that the MO/COFs system displayed exceptional stability. It was confirmed by a significant value of −448.54 KJmol−1 for total interaction energy. The density profile of dye molecules in the MO and Rh B-COFs systems exhibits the highest peaks at approximately 325.79, and 26.75 kg/m³, respectively. The free energy values for the DPs/COFs complexes at their global minima reached about, −512.127, −435.603, −381.244, −300.313, and −283.230 kJmol-1 for MO/GV/BG/TC/ and Rh B with the COFs, respectively. The nature of the design of TFFPy-COF’s unique, ultrafast kinetics, high adsorption capacity, and good reusability endow them with great potential for removing dyes in an aqueous environment.

Size-Dependent Deformation and Competition H-Bond Site-Induced Individual Fluorescence Response of a Single-Crystal Three-Dimensional Covalent Organic Framework.

Understanding the individual fluorescence response mechanism of covalent organic frameworks (COFs) at a single-crystal level is of great significance for the rational design of COF-based microsensors but unreachable because all previous COF-based sensors are performed with average fluorescence response behavior of various sized polycrystalline COFs. Herein, we design to explore the fluorescence response of a monodisperse single-crystal COF and further reveal the individual heterogeneity of the response mechanism. Three-dimensional single-crystal COF-301 (SCOF-301) with an intramolecular H-bond-induced excited-state intramolecular proton-transfer effect is selected as a proof-of-concept SCOF. With ethanol, benzene, and ammonia as model analytes, three different deformation and competition H-bond site-induced fluorescence response mechanisms related to crystal size are revealed. Small single particles of SCOF-301 (SSCOF-301) exhibit a more flexible structure, leading to the dominant role of deformation in the fluorescence response of small-sized SSCOF-301. The decreasing flexibility of SSCOF-301 with the increase of crystal size results in involvement of competition of the H-bond site to the fluorescence response besides deformation. Further increase of the crystal size makes the large-sized SSCOF-301 difficult to deform; thus, the competition of the H-bond site dominates the fluorescence response. This work provides a deep understanding of the individual fluorescence response mechanism of COFs to guide the design of a functional COF sensor with suitable size and mechanism for different structural analytes.

The propensity for covalent organic frameworks to template polymer entanglement.

The introduction of molecularly woven three-dimensional (3D) covalent organic framework (COF) crystals into polymers of varying types invokes different forms of contact between filler and polymer. Whereas the combination of woven COFs with amorphous and brittle polymethyl methacrylate results in surface interactions, the use of the liquid-crystalline polymer polyimide induces the formation of polymer-COF junctions. These junctions are generated by the threading of polymer chains through the pores of the nanocrystals, thus allowing for spatial arrangement of polymer strands. This offers a programmable pathway for unthreading polymer strands under stress and leads to the in situ formation of high-aspect-ratio nanofibrils, which dissipate energy during the fracture. Polymer-COF junctions also strengthen the filler-matrix interfaces and lower the percolation thresholds of the composites, enhancing strength, ductility, and toughness of the composites by adding small amounts (~1 weight %) of woven COF nanocrystals. The ability of the polymer strands to closely interact with the woven framework is highlighted as the main parameter to forming these junctions, thus affecting polymer chain penetration and conformation.

12 Connecting Sites Linked Three-dimensional Covalent Organic Frameworks with Intrinsic Non-interpenetrated shp Topology for Photocatalytic H2O2 Synthesis.

Developing high connectivity (>8) three-dimensional (3D) covalent organic frameworks (COFs) towards new topologies and functions remains a great challenge owing to the difficulty in getting high connectivity organic building blocks. This however represents the most important step towards promoting the diversity of COFs due to the still limited dynamic covalent bonds available for constructing COFs at this stage. Herein, highly connected phthalocyanine-based (Pc-based) 3D COFs MPc-THHI-COFs (M=H2, Ni) were afforded from the reaction between 2,3,9,10,16,17,23,24-octacarboxyphthalocyanine M(TAPc) (M=H2, Ni) and 5,5',5'',5''',5'''',5'''''-(triphenylene-2,3,6,7,10,11-hexayl)hexa(isophthalohydrazide) (THHI) with 12 connecting sites. Powder X-ray diffraction analysis together with theoretical simulations and transmission electron microscopy reveals their crystalline nature with an unprecedented non-interpenetrated shp topology. Experimental and theoretical investigations disclose the broadened visible light absorption range and narrow optical band gap of MPc-THHI-COFs. This in combination with their 3D nanochannels endows them with efficient photocatalysis performance for H2O2 generation from O2 and H2O via 2e- oxygen reduction reaction and 2e- water oxidation reaction under visible-light irradiation (λ >400 nm). This work provides valuable result for the development of high connectivity functional COFs towards diverse application potentials.