Thermally Activated Delayed Fluorescence Organic Light-emitting Diodes Research Articles

Coumarin-Based Thermally Activated Delayed Fluorescence Emitters with High External Quantum Efficiency and Low Efficiency Roll-off in the Devices.

Thermally activated delayed fluorescence (TADF) emitters have attracted much interest for their great applications in organic light-emitting diodes (OLEDs), but the TADF OLEDs are limited by large efficiency roll-offs. In this study, we report two coumarin-based TADF emitters, 3-methyl-6-(10H-phenoxazin-10-yl)-1H-isochromen-1-one (PHzMCO) and 9-(10H-phenoxazin-10-yl)-6H-benzo[c]chromen-6-one (PHzBCO), with relatively high photoluminescence quantum yields (PLQYs) and extremely small singlet-triplet splittings. OLEDs using these two TADF compounds as the emitters respectively demonstrate high external quantum efficiencies of 17.8% for PHzMCO and 19.6% for PHzBCO, which are the highest among the reported coumarin-derivative-based OLEDs. More importantly, these devices based on PHzMCO and PHzBCO remained 10.3% and 12.9% at 10000 cd m-2, respectively, showing relatively low efficiency roll-offs at high brightness. These results reveal that the TADF emitters with high PLQYs can effectively reduce the efficiency roll-off in the devices.

Molecular Design Strategy of Organic Thermally Activated Delayed Fluorescence Emitters

Recently, organic thermally activated delayed fluorescence (TADF) emitters have attracted a great deal of attention because they can theoretically realize 100% internal quantum efficiency. Many TADF emitters have been developed since the first demonstration of close to 20% external quantum efficiency in the devices. Recently developed TADF emitters demonstrated close to 37% external quantum efficiency in blue, above 30% external quantum efficiency in green, and close to 18% external quantum efficiency in red devices. Therefore, TADF organic light-emitting diodes could potentially be substituted for high-efficiency phosphorescent organic light-emitting diodes. In this work, we reviewed molecular design strategies of organic-based TADF emitters by classifying them into several categories depending on the material parameters required for the TADF emitters. In addition, we proposed a future development direction of TADF emitters to make them competitive with phosphorescent emitters.

Molecular Design of Highly Efficient Thermally Activated Delayed Fluorescence Hosts for Blue Phosphorescent and Fluorescent Organic Light-Emitting Diodes

Recently, thermally activated delayed fluorescence (TADF) materials have become the most promising hosts for realizing high-performance phosphorescent and fluorescent organic light-emitting diodes (OLEDs) because of their ability to upconvert triplet excitons to singlet excitons. However, despite a few TADF hosts having been introduced for low energy phosphorescent and fluorescent dopants, developing host materials with TADF properties for blue phosphorescent and TADF OLEDs is still a great challenge to date. In this study, bipolar hosts exhibiting TADF behavior and high triplet energy, consisting of the carbazole group as the donor, diphenylsulphone moiety as the acceptor, and m-bitolyl as the π-conjugated bridge, are synthesized and applied for the first time to blue devices. The ΔEST value of the TADF host is tuned via the introduction of a cyano group in the carbazole moiety due to the increase of the LE contribution in the CT excited state. Detailed photophysical studies confirm the efficient TADF pr...

24-1: Device Stability Enhancement In TADF OLEDs

Organic light-emitting diodes (OLEDs) under constant current operation suffer from a decrease of luminance accompanied by an increase of driving voltage. We report a way to greatly improve the stability of OLEDs having a green emitter exhibiting thermally activated delayed fluorescence (TADF), (4s,6s)-2,4,5,6-tetra(9Hcarbazol- 9-yl) isophthalonitrile (4CzIPN), by introducing ultrathin (1 to 3 nm) interlayers of 8-hydroxyquinolinato lithium (Liq) between hole-blocking layer and its surrounding emissive and electron-transport layers. Under constant current operation starting at a luminescence of 1,000 cd/m2, the time to reach 90% of initial luminance (LT90) increased eight times, resulting in LT90 = 1,380 hours after insertion of the interlayers. Combining this new concept and mixed host system, LT95 was further extended to 1315 hours that is 16 times of reference device. This is the best value reported for TADF-based OLEDs and is comparable to the operational lifetimes of well-established phosphorescence-based OLEDs. Thermally stimulated current measurements showed that the number of deep charge traps was reduced with the insertion of the ultrathin Liq interlayer, indicating that reducing the number of deep traps is important for improving the operational lifetime and that exciton-polaron annihilation may be a source of the device degradation.

Review of organic light-emitting diodes with thermally activated delayed fluorescence emitters for energy-efficient sustainable light sources and displays

Thermally activated delayed fluorescence (TADF) is an emerging hot topic. Even though this photophysical mechanism itself has been described more than 50 years ago and optoelectronic devices with organic matter have been studied, improved, and even commercialized for decades now, the realization of the potential of TADF organic light-emitting diodes (OLEDs) happened only recently. TADF has been proven to be an attractive and very efficient alternative for phosphorescent materials, such as dopants in OLEDs, light-emitting electrochemical cells as well as potent emitters for chemiluminescence. In this review, the TADF concept is introduced in terms that are also understandable for nonchemists. The basic concepts behind this mechanism as well as state-of-the-art examples are discussed. In addition, the future economic impact, especially for the lighting and display market, is addressed here. We conclude that TADF materials are especially helpful to realize efficient, durable deep blue and white displays.

New Benzimidazole-Based Bipolar Hosts: Highly Efficient Phosphorescent and Thermally Activated Delayed Fluorescent Organic Light-Emitting Diodes Employing the Same Device Structure.

The rapid development of the thermally activated delayed fluorescence (TADF) emitters makes it necessary to produce new versatile host materials for both phosphorescent and TADF emitters. Three new bipolar host materials, 9,9'-(2'-(1H-benzimidazol-1-yl)-[1,1'-biphenyl]-3,5-diyl)bis(9H-carbazole) (o-mCPBI), 9,9'-(3'-(1H-benzimidazol-1-yl)-[1,1'-biphenyl]-3,5-diyl)bis(9H-carbazole) (m-mCPBI), and 9,9'-(4'-(1H-benzimidazol-1-yl)-[1,1'-biphenyl]-3,5-diyl)bis(9H-carbazole) (p-mCPBI), are designed and synthesized by integrating mCP with benzimidazole moiety via the ortho-, meta-, and para-positions of N-phenyl. The influence of different linking modes on the thermal, photophysical, electrochemical, and charge transport properties of the compounds is studied. By employing the same device structure except the emitting layer, the device performances of the blue, green, yellow, red, white phosphorescent and blue, green TADF organic light-emitting diodes (OLEDs) based on the three hosts are investigated. Among these three hosts, o-mCPBI exhibits the best device performance with external quantum efficiencies of over 20% for phosphorescent OLEDs and enhanced efficiencies for TADF devices. All these devices show relatively low efficiency roll-offs at high brightness. The versatility of the benzimidazole-based bipolar host o-mCPBI, such as an extremely high triplet energy level, suitable molecular orbital energy levels, improved thermal and charge transport properties, and excellent device performances for various colors, makes it a universal host material for highly efficient both phosphorescent and TADF OLEDs.

40.3: Optimization of Host‐Dopant System for Realizing Efficient Thermally Activated Delayed Fluorescence OLEDs

In this paper, we describe a promising way to realize highly efficient fluorescent OLEDs (Organic Light Emitting Diodes) via thermally activated delayed fluorescence (TADF) mechanism. The resultant TADF OLEDs with optimized host‐dopant system showed comparable device performances and surpassed the limits of conventional fluorescent OLEDs.