Thermal Absorption Research Articles

Particle transport and turbulence modification in unstably stratified mixed convection within a horizontal channel

Particle transport and turbulence modification in an unstably stratified, particle-laden turbulent flow within a horizontal channel is studied via direct numerical simulations combined with Lagrangian point‒particle tracking techniques. Two-way coupling in momentum and energy is considered in dilute gas‒solid flows under mixed convection (synergistic effects of shear and buoyancy). For comparison, simulations of neutral turbulence are also conducted with equivalent parameters. The study reveals that large-scale longitudinal vortical structures induce significant spatial heterogeneity in the spanwise distribution of inertial particles. This heterogeneity is characterized by an increase in the particle concentration on the side of the cold plume and a corresponding decrease on the side of the hot plume. In the context of unstably stratified turbulence, particles reduce the fluid streamwise velocity and promote its profile toward symmetry. This phenomenon contrasts with that observed in neutral flows, where particles induce velocity asymmetry by dragging the upper flow and accelerating the lower flow. A quantitative analysis of the heat flux indicates that particles absorb heat as they settle, thereby reducing the average temperature of the flow. Buoyancy effects slow the settling and reinjection of particles, which in turn diminishes thermal energy absorption. Particles with higher inertia preferentially settle on the cooler plume side, minimizing their participation in heat exchange due to prolonged durations of repeated wall collisions.

A facile strategy for customizing multifunctional magnetic‑dielectric carbon microflower superstructures deposited with carbon nanotubes

The novel fabrication of multiple components and unique heterostructure can inject infinite vitality into the electromagnetic wave (EMW) attenuation field. Herein, through the self-assembly of polyimide complexes and catalytic chemical vapor deposition, porous carbon microflowers were synthesized accompanied by carbon nanotubes (CNTs). By regulating the metal ions, the composition and structure of the as-obtained hybrids are modified correspondingly, and thus the adjustable thermal management and EMW absorption capabilities are obtained. In detail, the rich pores and huge specific surface area endow the hierarchical structures with distinguished thermal insulation ability (λ<0.07). The carbon framework and CNTs are beneficial for consuming EMWs via conductive loss and defect polarization loss while reducing the filling ratio and thickness. The doped heteroatoms and abundant heterointerfaces generate ample dipole polarization and interface polarization losses (supported by DFT calculation). The metal nanoparticles uniformly embedded in the carbon framework offer optimized impedance matching, proper defect polarization, and suitable magnetic loss. Accordingly, the synergy of magnetic-dielectric balance and flower-like superstructure enables FNCFN2 and NNCFN2 to accomplish remarkable microwave absorbing capacity with thin thickness (14 wt.%). Therefore, respectable specific reflection loss and specific effective absorption bandwidth are acquired (215.39 dB mm–1 and 22.10 GHz mm–1, 257.23 dB mm–1 and 22.12 GHz mm–1 respectively), superior to those of certain renowned carbon-based absorbers. The simulation results of electric field intensity distributions, power loss density, and radar cross section reduction (maximum value of 36.02 dBm2) also verify the prominent radar stealth capability. Moreover, the customizable approach can be applied to other metals to obtain fulfilling behaviors. Henceforth, this work provides profound insights into the relationship between structure and performance, and proposes an efficient path for mass-producing multifunctional and high-performance EMW absorbers with excellent thermal properties.

Machine learning-enabled design of Fe-based bulk metallic glasses for superior thermal neutron absorption properties

Machine learning-enabled design of Fe-based bulk metallic glasses for superior thermal neutron absorption properties

MoS2/N-doped hollow carbon foam for thermal insulation and broadband electromagnetic wave absorption

In this study, we demonstrated the synthesis of MoS2/N-doped hollow carbon foam (MoS2/NCF) for high performance of electromagnetic wave absorption (EMA), through high-temperature pyrolysis melamine foam and hydrothermal reaction. By adjusting the electromagnetic parameters of N-doped hollow carbon foam (NCF) through MoS2 nanosheets, the effective absorption bandwidth of MoS2/NCF reached 9.62 GHz at the matching thickness was 2.3 mm. Radar cross section (RCS) simulation results demonstrated that MoS2/NCF exhibited a strong reduction ability of RCS. At room temperature, the composite MoS2/NCF could block radiation temperature of around 110 ℃ in the case of a thickness of only 7 mm and a heating plate at 200 ℃. Moreover MoS2/NCF exhibited thermal stability and a certain flame retardants ability. The result indicated that the composite MoS2/NCF was beneficial for its application in the fields of thermal insulation and electromagnetic wave absorption.

Mechanical, thermal, and water absorption properties of HDPE/barley straw composites incorporating waste rubber

This study investigates the mechanical, thermal, and water absorption properties of high-density polyethylene (HDPE) composites filled with barley straw and varying amounts of waste rubber. The research aims to develop sustainable materials that repurpose agricultural and industrial waste while addressing resource scarcity and waste management challenges. Composites were prepared using a twin-rotor mixer and hydraulic press, with waste rubber content varying from 0 to 20 wt%. Mechanical properties were evaluated through tensile testing, thermal behavior was analyzed using TGA, DTG, and DSC, and long-term water absorption was measured. Results show that increasing waste rubber content from 0 to 20% led to a decrease in tensile strength (11.3 to 8.9 MPa) and tensile modulus (1760 to 790 MPa), while relative extension increased (2.4–5.9%). Thermal analysis revealed a slight reduction in onset degradation temperature (270 °C to 240 °C) and increased char residue (8–18%) with higher rubber content. Water absorption decreased significantly, from 12 to 13% to 6–7% after 600 h of immersion, as waste rubber content increased. These findings demonstrate that incorporating waste rubber into HDPE/barley straw composites results in materials with enhanced flexibility and water resistance at the cost of some strength and stiffness. In conclusion, the results of this study offer a clear pathway for the development of sustainable polymer composites that have broad potential applications across industries like construction, marine infrastructure, automotive, and packaging. By replacing traditional, resource-intensive materials with eco-friendly alternatives, these composites not only provide functional benefits but also support global efforts toward sustainable development and environmental conservation.

Compressive Mechanical and Heat Conduction Properties of AlSi10Mg Gradient Metamaterials Fabricated via Laser Powder Bed Fusion

Metamaterials are defined as artificially designed micro-architectures with unusual physical properties, including optical, electromagnetic, mechanical, and thermal characteristics. This study investigates the compressive mechanical and heat transfer properties of AlSi10Mg gradient metamaterials fabricated by Laser Powder Bed Fusion (LPBF). The morphology of the AlSi10Mg metamaterials was examined using an ultrahigh-resolution microscope. Quasi-static uniaxial compression tests were conducted at room temperature, with deformation behavior captured through camera recordings. The findings indicate that the proposed gradient metamaterial exhibits superior compressive strength properties and energy absorption capacity. The Gradient-SplitP structure demonstrated better compressive performance compared to other strut-based structures, including Gradient-Gyroid and Gradient-Lidinoid structures. With an apparent density of 0.796, the Gradient-SplitP structure exhibited an outstanding energy absorption capacity, reaching an impressive 23.57 MJ/m3. In addition, heat conductivity tests were performed to assess the thermal resistance of these structures with different cell configurations. The gradient metamaterials exhibited higher thermal resistance and lower thermal conductivity. Consequently, the designed gradient metamaterials can be considered valuable in various applications, such as thermal management, load-bearing, and energy absorption components.

Sensitivity improvement of a deuterium-deuterium neutron generator based in vivo neutron activation analysis (IVNAA) system.

Our lab has been developing a deuterium-deuterium (DD) neutron generator-based neutron activation analysis (NAA) system to quantify metals and elements in the human body in vivo. The system has been used to quantify metals such as manganese, aluminum, sodium in bones of a living human. The technology provides a useful way to assess metal exposure and to estimate elemental deposition, storage and biokinetics. It has great potential to be applied in the occupational and environmental health fields to study the association of metal exposure and various health outcomes, as well as in the nutrition field to study the intake of essential elements and human health. However, the relatively low sensitivity of the system has greatly limited its applications. Neutron moderation plays an important role in designing an IVNAA facility, as it affects thermal neutron flux in irradiation cave and radiation exposure to the human subject. This study aims to develop a novel thermal neutron enhancement method to improve the sensitivity of the in vivo neutron activation analysis (IVNAA) system for elemental measurement but still maintain radiation dose. Utilizing a compact DD neutron source, we propose a new and practical moderator design that combines high density polyethylene with heavy water to enhance thermal neutrons by reducing thermal neutron absorption. All material dimensions are calculated by PHITS, a general-purpose Monte Carlo simulation program. The improvement of the new design predicted by the Monte Carlo simulation for the quantification of one of the elements, manganese was verified by experimental irradiation of manganese-doped bone equivalent phantoms. For the same radiation dose, a 67.9% thermal neutron flux enhancement is reached. With only 4.2% increase of radiation dose, the simulated thermal neutron flux and activation can be further increased by 84.2%. A 100% thermal neutron enhancement ratio is also achievable with a 20% dose increase. The experimental results clearly show higher manganese activation gamma ray counts for each specific phantom, with a significantly reduced minimum detection limit. Additionally, the photon dose was suppressed. The thermal neutron enhancement method can increase the number of useful neutrons significantly but maintain the radiation dose. This greatly decreased the detection limit of the system for elemental quantification at an acceptable dose, which will broadly expand the application of the technology in research and clinical use. The method can also be applied to other neutron medical applications, including neutron imaging and radiotherapy.

Effect of Shikimic Acid on Oxidation of Myofibrillar Protein of Duck Meat During Heat Treatment.

The myofibrillar protein (MP) of duck meat is prone to excessive oxidation during thermal processing, resulting in a decline in its overall quality. In this paper, the effect of shikimic acid on the oxidative structure of duck muscle fibrin was studied. The findings showed that, at a mass ratio of 1:50,000 (g/g) between shikimic acid and MP, the carbonyl content of MP was reduced by 74.20%, while the sulfhydryl content was increased by 73.56%. MP demonstrated the highest denaturation temperature, whereas its thermal absorption was the lowest. The percentage of α-helixes and β-sheets increased by 16.72% and 24.74%, respectively, while the percentage of irregular structures decreased by 56.23%. In addition, the surface hydrophobicity index of MP exhibited a significant decrease (p < 0.05), while there was a significant increase in its free radical-scavenging ability (p < 0.05). Molecular fluorescence spectrum analysis showed that shikimic acid could bind to MP, altering the internal environment of MP and enhancing its thermal stability. FTIR analysis showed that shikimic acid could enhance the distribution of protein particle sizes by reducing irregular structures, the proportion of β-rotation, and the degree of protein aggregation. It is hoped that this research can offer scientific support for improving meat processing technology.

Enhancing solar flat plate collector efficiency with advanced phase change materials and expanded boron nitride

ABSTRACT Thermal energy storage, particularly through Phase Change Materials (PCMs), is gaining significant attention for its ability to enhance storage capacity and thermal conductivity. PCMs help alleviate the strain on renewable energy sources and stabilize load fluctuations. This study integrates a novel combination of LiNO3-NaSO4·10H2O-NaCl with boron nitride into Flat Plate Collectors (FPCs) to boost system performance. This Composite Phase Change Material (CPCM) increases latent heat value by up to 245.80 kJ, enhancing thermal decomposition and absorption rates while reducing heat losses. Boron nitride improves thermal conductivity by 25%, from 1.378 W/m·K to 5.543 W/m·K, increasing the CPCM's charging rate. The specific heat capacity rises from 4.2 J/g·°C to 5 J/g·°C at a maximum temperature of 90°C. As a result, the collector's efficiency improves by 15%, achieving an overall system efficiency of 88%. Water serves as the heat transfer fluid, and simulations are conducted using Python in Anaconda Jupyter Notebook.

Green Strategy for a Large-Format, Superhard, and Insulated Electromagnetic Wave Absorber Inspired by a Natural Feature of a Conch Shell.

Due to the intensification of electromagnetic pollution and energy shortages, there is an urgent need for multifunctional composites that can absorb electromagnetic waves and provide insulation. However, developing low-cost electromagnetic wave-absorbing composites that are lightweight, high strength, heat-insulating, and large-format for special environments remains challenging. Inspired by the conch shell, this article proposes a green strategy of hydration recrystallization self-assembly. Highly biologically active hydroxyapatite (HAP) was used to lock in free water to prevent porous carbon fibers from absorbing a large amount of water. Meanwhile, HAP underwent ion exchange and recombined with hydrated crystals of magnesium oxychloride to form a gelatinous HAP-5 phase crystal. The cementitious HAP-5 phase crystal was interwoven and interlocked with the support skeleton carbon fibers and metal Ni powder to form conch shell composites (Bio-CSC) with multiple interfaces via electrostatic adsorption and metal complexation. This strategy utilized inorganic substances as bridges to uniformly disperse conductive materials such as carbon fibers to construct a conductive network with an enriched interface polarization. The prepared Bio-CSC was composed of multiple heterogeneous interfaces and was lightweight and high strength, with a specific strength increase of 300%. It also provided excellent thermal insulation and electromagnetic wave absorption. Its thermal conductivity was 0.071 W·m-1·k-1, and the lowest RLmin value of -21.88 dB, with a matching thickness of only 1.2 mm. The composites in this study overcame the limitations of traditional absorption materials such as high magnetism and single function and may be used in fields such as building energy conservation and electromagnetic safety.

Design and performance study of a multiband metamaterial tunable thermal switching absorption device based on AlCuFe and VO2.

In this paper, we propose a multiband adjustable metamaterial absorption device based on a Dirac semimetal (BDS) AlCuFe and a thermally controlled phase-change material VO2. The absorption device has an axially symmetric structure, resulting in polarization-independent characteristics, and when VO2 is in a high-temperature metal state, ultra-high absorption rates and sensitives at frequencies of M1 = 2.89 THz, M2 = 7.53 THz, M3 = 7.97 THz, and M4 = 9.02 THz are achieved. Using a parameter inversion method, we calculated the impedance of the absorber, proving that it achieves impedance matching and produces perfect absorption in the resonance region. Additionally, we changed the physical and chemical parameters of the absorption device, demonstrating the device's excellent tunability and manufacturing tolerance. Furthermore, by lowering the temperature of VO2 to that of a low dielectric state, additional resonant peaks with ultra-high absorption rates at frequencies M5 = 5.62 THz, M6 = 7.16 THz, M7 = 7.64 THz, and M8 = 8.80 THz were obtained, broadening the absorption band of the device. Lastly, we investigated the detection sensitivity of the device by changing the external refractive index, resulting in a maximum sensitivity of 2229 GHz RIU-1. To sum up, the absorption device has great application potential in the fields of communication, sensing, temperature detection and photoelectric instruments.

Honeycomb Cell Structures Formed in Drop-Casting CNT Films for Highly Efficient Solar Absorber Applications.

This study investigates the process of using multi-walled carbon nanotube (MWCNT) coatings to enhance lamp heating temperatures for solar thermal absorption applications. The primary focus is studying the effects of the self-organized honeycomb structures of CNTs formed on silicon substrates on different cell area ratios (CARs). The drop-casting process was used to develop honeycomb-structured MWCNT-coated absorbers with varying CAR values ranging from ~60% to 17%. The optical properties were investigated within the visible (400-800 nm) and near-infrared (934-1651 nm) wavelength ranges. Although fully coated MWCNT absorbers showed the lowest reflectance, honeycomb structures with a ~17% CAR achieved high-temperature absorption. These structures maintained 8.4% reflectance at 550 nm, but their infrared reflection dramatically increased to 80.5% at 1321 nm. The solar thermal performance was assessed throughout a range of irradiance intensities, from 0.04 W/cm2 to 0.39 W/cm2. The honeycomb structure with a ~17% CAR value consistently performed better than the other structures by reaching the highest absorption temperatures (ranging from 52.5 °C to 285.5 °C) across all measured intensities. A direct correlation was observed between the reflection ratio (visible: 550 nm/infrared: 1321 nm) and the temperature absorption efficiency, where lower reflection ratios were associated with higher temperature absorption. This study highlights the significant potential for the large-scale production of cost-effective solar thermal absorbers through the application of optimized honeycomb-structured absorbers coated with MWCNTs. These contributions enhance solar energy efficiency for applications in water heating and purification, thereby promoting sustainable development.

Lightweight and highly heat-resistant copolymerized polyimide foams for superior thermal insulation and acoustic absorption

The development of lightweight and highly heat-resistant polyimide foams (PIFs) remains a great challenge in areas of aerospace, military ships, transportation, and industries. Herein, a series of lightweight and highly thermal-resistant copolymerized PIFs are successfully fabricated by the “stepwise heating-holding” thermal foaming of the copolymerized polyester ammonium salts (C-PEAS), using 3,3′,4,4′-benzophenone tetracarboxylic acid dianhydride (BTDA) and 2,3,3′,4′-biphenyl tetracarboxylic acid dianhydride (α-BPDA) as codianhydride, and p-phenylenediamine (PDA) as diamine. The introduction of α-BPDA increases the rigidity of PI molecule chains and foamability of C-PEAS, and significantly improves the heat resistance of PIFs. The resultant copolymerized PIFs exhibit ultra-low densities (<10 kg·m-3), excellent heat resistance (Tg ranging from 351.2°C to 405.6°C), and high thermal stability. Moreover, they possess high flame retardancies (LOI>44%) and low thermal conductivities (as low as 0.0463 W·m-1∙K-1 at 20°C and no more than 0.0825 W·m-1∙K-1 at 200°C), demonstrating their excellent thermal insulation properties in a wide temperature range. After the continuous heating at 200°C for 40 min, the upper surface of PIFs present low average temperatures less than 60°C. Additionally, the copolymerized PIFs exhibit remarkable acoustic properties with average acoustic absorption coefficients above 0.6 and noise reduction coefficients (NRC) above 0.3. Therefore, the lightweight and highly heat-resistant copolymerized PIFs show great application potentials in the extreme environments of aerospace, military ships, transportation, and industries.

Swelling and dissolution behaviors of cellulose in phosphate-based ionic liquids-H2O binary systems: In-situ observation and molecular dynamics simulation

Swelling and dissolution of cellulose in ionic liquids (ILs) as the pretreatment processes are key steps for the high-value conversion and utilization of cellulose. However, the molar ratio of H2O to ILs has a significant effect on the swelling and dissolution of cellulose, and its molecular-scale mechanism is still unclear, which limits screening out the suitable ILs and recovery of ILs from coagulation bath in the spinning process. Herein, three phosphate-based ILs were chosen to couple with water as solvents for swelling and dissolution of cellulose by combining in-situ observation and molecular dynamics (MD) simulation. The results show that the redissolution time of swollen cellulose is greatly reduced, especially [Emim]DEP-H2O has the best swelling and dissolution performance for cellulose due to its high β value and low viscosity. Meanwhile, when the molar ratio of IL to H2O was more than 1: 1, the IL-H2O system still has the ability to dissolve cellulose. While with the molar ratio further decreased, cellulose was no longer dissolved and began to swell, and the fiber diameter obtained the maximum swelling rate with 40.1% at a molar ratio of 1: 3. Moreover, MD simulation was used to calculate the interaction between IL/water/cellulose, which further illustrated that the combination of IL with water molecular has a significant influence on the behavior of cellulose in IL-H2O systems at the molecular scale. Thus, the potential swelling and dissolution mechanism of cellulose in ILs-H2O binary systems was proposed based on experimental and simulation results. Furthermore, the characterization results of swollen cellulose indicate that the crystal structure and degree of polymerization (DP) were almost unchanged, but the specific surface area and pore size increased significantly, and the thermal stability and heat absorption were decreased, all the results prove that the swelling process increased the accessibility of cellulose and benefited to the subsequent dissolution. Consequently, preferable swelling and dissolving parameters of experiments and simulations will provide a new idea for the selection of suitable ILs and the recovery of ILs from a coagulation bath in the dry-wet spinning process.

Flexible poly (vinylidene fluoride) composite with magnetite-modified graphene: Electromagnetic shielding in X-band

Electromagnetic pollution, or electromagnetic interference (EMI), is a phenomenon that has arisen due to the fast spread of electronic gadgets. To overcome EMI problem, polymer-based composites have sparked considerable attention among researchers owing to their superior qualities. Hence, this work utilizes magnetite-modified graphene (MMG) filler with polyvinylidene fluoride (PVDF) polymer to form polymer composites in various proportions ranging from 2 to 10 wt% to study the EM properties in the X-band. It was observed that the sample composite having a MMG filler content of 10 wt% possesses a relatively higher electrical conductivity of 0.65 S/cm as compared to the other prepared composites in this research work. The same sample composite also attained a total shielding efficacy of 53.04 dB at a thickness of 3 mm. Moreover, it was observed that the filler has improved the material's thermal stability and microwave absorption capacity, making it a high-efficiency EMI shielding material appropriate for usage in the electronic and aviation industries.

Mechanical Properties and Energy Absorption Characteristics of Additively Manufactured Lattice Structures of a High‐Temperature Titanium Matrix Composite

Lightweight lattice structure is of great significance in the fields of aerospace thermal protection and energy absorption. In this study, compressive properties and energy‐absorbing characteristics of additively manufactured body‐centered cubic (BCC) lattice structures of a high‐temperature titanium matrix composite (TMC) are investigated systematically. It is found that compressive strength increases monotonically as either lattice strut diameter or temperature increases. With lattice strut diameter increasing from 1.0 to 1.5 and 2.0 mm, strength increases from 78 to 94 and 108 MPa at room temperature (RT) and from 71 to 104 and 123 MPa at 650 °C. Unexpectedly, specific energy absorption (SEA) capability increases as strut diameter decreases, although also increases as temperature increases. BCC lattice structure with a strut diameter of 1.0 mm presents the highest SEA being up to 13.7 MJ m−3 at RT and 142 MJ m−3 at 650 °C. And sphericizing the lattice nodes is found incapable of enhancing strength and SEA. Besides, numerical simulation is used to demonstrate the compressive stress and strain fields, in order to explain the fracture modes and SEA capability of individual BCC lattice structures. This study provides deep insights into the mechanical properties and energy absorption behavior of additively manufactured lattice structures of TMCs.

Development of Poly(lactic acid)-Based Biocomposites with Silver Nanoparticles and Investigation of Their Characteristics

Nowadays, the demand for food packaging that maintains the safety and quality of products has become one of the leading challenges. It can be solved by developing functional materials based on biodegradable polymers, such as poly(lactic acid) (PLA). In order to develop PLA-based functional materials with antibacterial activity, silver nanoparticles (AgNPs) were introduced. In the present study, AgNPs stabilized by a copolymer of ethylene and maleic acid were used. Under the joint action of shear deformations and high temperature, the biocomposites of PLA with poly(ethylene glycol) and AgNPs were produced. Their mechanical and thermal characteristics, water absorption, and structure were investigated using modern methods (DSC, FTIR, Raman spectroscopy, SEM). The effect of AgNP concentration on the characteristics of PLA-based biocomposites was detected. Based on the results of antibacterial activity tests (against Gram-positive and Gram-negative bacteria, along with yeast) it is assumed that these systems have potential as materials for extending the storage of food products. At the same time, PLA–PEG biocomposites with AgNPs possess biodegradability.

INVESTIGATION OF PHYSICAL, MECHANICAL AND THERMAL PROPERTIES OF MINERAL ADMIXED AUTOCLAVED FOAM CONCRETE

In this study, the aim was to develop a non-combustible, economical, and entirely domestically sourced and technology-based autoclaved foam concrete thermal insulation material. In autoclaved foam concrete (AFC) with a density of 300 kg/m3, which meets thermal insulation material standards, the density, capillary water absorption coefficient, compressive and flexural strengths, ultrasonic pulse velocity, dynamic modulus of elasticity, thermal conductivity, and the mineralogical properties of hydration products based on XRD of some silica-based mineral additives (fly ash, amorphous silica, and metakaolin) substituted at different ratios (5%, 10%, and 15%) for cement were investigated. Autoclaving improved the physico-mechanical properties of mineral-added foam concrete. Among the mineral additives, the highest strength values were obtained in the foam concrete with 5% metakaolin, while the lowest thermal conductivity and capillary water absorption values were obtained in the foam concrete with 5% fly ash. The study concluded that autoclaving is highly effective in producing a sustainable thermal insulation material in foam concrete.

Polymer Boron-Containing Composite for Protecting Astronauts of Manned Orbital Stations from Secondary Neutron Radiation

This article considers the prospects of using heat-resistant polyimide boron-containing composites to protect astronauts of manned orbital stations from secondary neutron radiation. Variant calculations are performed regarding neutron and gamma-quanta flux distributions in a polyimide composite material with different boron content used to reduce capture radiation. The dependences of spatial distributions of thermal neutron flux density and the gamma-quanta dose rate in a polyimide composite layer with a boron content of 0 to 5% are obtained. An experimental assessment of the energy distribution of neutron and gamma radiation behind the protective polyimide composite is carried out. The introduction of boron atoms in an amount of 3.0 wt.% shows the absence of bursts of secondary gamma radiation energy in the composite, which is due to the high cross-section of thermal neutron absorption by boron atoms. As a result, with a material layer thickness of 3–10 cm, the gamma-quanta dose rate decreases by 2–3 times. The differential thermal analysis method showed that the upper limit of the working temperature of the polyimide composite is 500 °C. The polyimide matrix filled with boron atoms can find effective application in the development of new radiation-protective polymer materials used in manned orbital stations.

Enhancing Power and Thermal Gradient of Solar Photovoltaic Panels with Torched Fly-Ash Tiles for Greener Buildings

Solar photovoltaic (PV) panels that use polycrystalline silicon cells are a promising technique for producing renewable energy, although research on the cells’ efficiency and thermal control is still ongoing. This experimental research aims to investigate a novel way to improve power output and thermal performance by combining solar PV panels with burned fly-ash tiles. Made from burning industrial waste, torched fly ash has special qualities that make it useful for architectural applications. These qualities include better thermal insulation, strengthened structural integrity, and high energy efficiency. Our test setup shows that when solar PV panels are combined with torched fly-ash tiles, power generation rises by 7% and surface temperature decreases by 3% when compared to standard panels. The enhanced PV efficiency is ascribed to the outstanding thermal insulation properties of fly ash tiles and their capacity to control panel temperature. To ensure longevity and safety in building applications, the tiles employed in this study had a water absorption rate of 5.37%, flexural strength of 2.95 N/mm2, and slip resistance at 38 km/h. Furthermore, we find improved structural resilience and lower cooling costs when up to 30% of the sand in floor tiles is replaced with torched fly ash, which makes this method especially appropriate for sustainable buildings. Key performance indicators that show how effective these tiles are in maximizing energy use in buildings include thermal emissivity (0.874), solar reflectance (0.8), and solar absorption (0.256). While supporting more ecofriendly building techniques, this study highlights the advantages of utilizing burned fly ash in solar PV systems: enhanced power generation and thermal comfort. The main results open a greater potential for fly ash use in different building materials. The use of torched fly ash in building materials enhances thermal insulation and structural integrity while lowering cooling costs, making it an ideal choice for eco-friendly construction and highlighting the potential for further research into environmentally responsible, energy-efficient solutions.