Theoretical Error Estimates Research Articles

Large time solution for collisional breakage model: Laplace transformation based accelerated homotopy perturbation method

The behavior of several particulate processes, such as cell interaction, blood clotting, bubble formation, grain breakage, and cheese formation from milk, have been studied using coagulation and fragmentation models (Fogelson and Guy, 2008 [1]; Pazmiño et al., 2022 [2]; Chen et al., [3]). Various studies utilize the linear fragmentation model to simplify the underlying physics. However, in real-life scenarios, particles form due to the collision of two particles, leading to a non-linear collisional breakage model. Unfortunately, the collisional breakage model is less explored due to its complex behavior. While analytical solutions are difficult to compute and are still missing in the literature, this article proposes an approximate solution for the model using the Laplace-based accelerated homotopy perturbation method. Further, coupling with Padé approximant, the accuracy of the solution is extended for the longer time. Considering various physically relevant kernels, the approximate series solutions are compared with the well known finite-volume solutions to measure the accuracy in terms of qualitative and quantitative errors. The article also encompasses theoretical convergence analysis and error estimations to enhance comprehension of the proposed formulation.

A dynamic linearized wall model for turbulent flow simulation: towards grid convergence in wall-modeled simulations

This paper addresses the common issue of (no-)grid convergence in wall-modeled numerical simulations and proposes a dynamic linearization technique applied to the Spalart-Allmaras wall model to achieve a proper behavior on fine grids and low-friction areas. A theoretical analysis of the numerical error committed on the shear stress balance close to the walls is performed. It shows that the error is due to the inappropriate imposition of too steep wall-normal velocity gradients that cannot be properly accounted for on the typical grids used for wall-modeled simulations. Based on this error quantification, a dedicated wall model linearization technique is proposed, following the approach developed by Tamaki, Harada and Imamura in 2017. In the proposed modified linearization method, the linearization distance is modified and adjusted dynamically. This is done according to the theoretical shear stress error estimate, in order to keep the numerical error below a user-defined threshold. The method is applied to well-referenced test cases of increasing complexity from the Turbulence Modeling Resource. Overall, the proposed wall model clearly exhibits appropriate grid convergence properties and is also able to predict accurately non-equilibrium boundary layers and flow separation using proper grid refinement.

Optimally accurate second-order numerical scheme on layer-resolving graded mesh for singularly-perturbed boundary turning point problems exhibiting power-of-type-1 and hybrid layers

The paper discusses singularly-perturbed problems with boundary turning points. It describes constructions of layer-resolving grids based on layer-eliminating coordinate transformations and analyses the convergence of numerical solutions obtained using the upwind scheme on the layer-resolving grids and Richardson extrapolations. Theoretical error estimates and numerical experiments confirm that the upwind scheme with Richardson extrapolation on the proposed layer-resolving grids is uniformly convergent of order two without any logarithmic factor.

Meshless method and shifted Chebyshev polynomials for solving a class of VIEs of the third kind

The main goal of this study is to solve a class of linear and nonlinear Volterra integral equations (VIEs) of the third kind. The proposed technique estimates the solution of these equations using a technique based on MLS approximation and shifted Chebyshev polynomials. The approach is independent of the geometry of the domain and does not require any background meshes; therefore, it can be considered a meshless approach. The new method is effective and more flexible for many types of VIEs of the third kind, and its algorithm can be simply implemented on computers. The construction of a new technique for the proposed equations has been introduced. The convergence analysis is also studied. The convergence precision of the new approach is checked on classes of VIEs of the third kind, and the results validate the theoretical error estimates. Finally, numerical tests are provided to illustrate the accuracy and reliability of this approach.

Theoretical error estimates for computing the matrix logarithm by Padé-type approximants

In this article, we focus on the error that is committed when computing the matrix logarithm using the Gauss–Legendre quadrature rules. These formulas can be interpreted as Padé approximants of a suitable Gauss hypergeometric function. Empirical observation tells us that the convergence of these quadratures becomes slow when the matrix is not close to the identity matrix, thus suggesting the usage of an inverse scaling and squaring approach for obtaining a matrix with this property. The novelty of this work is the introduction of error estimates that can be used to select a priori both the number of Legendre points needed to obtain a given accuracy and the number of inverse scaling and squaring to be performed. We include some numerical experiments to show the reliability of the estimates introduced.

Finite element modelling of linear rolling contact problems

The present work is devoted to the finite element modelling of linear hyperbolic rolling contact problems. The main equations encountered in rolling contact mechanics are reviewed in the first part of the paper, with particular emphasis on applications from automotive and vehicle engineering. In contrast to the common hyperbolic systems found in the literature, such equations include integral and boundary terms, as well as time-varying transport velocities, that require special treatment. In this context, existence and uniqueness properties are discussed within the theoretical framework offered by the semigroup theory. The second part of the paper is then dedicated to recovering approximated solutions to the considered problems, by combining discontinuous Galerkin finite element methods (DGMs) with explicit Runge–Kutta (RK) schemes of the first and second order for time discretisation. Under opportune assumptions on the smoothness of the sought solutions, and owing to certain generalised Courant–Friedrichs–Lewy (CFL) conditions, quasi-optimal error bounds are derived for the complete discrete schemes. The proposed algorithms are then tested on simple scalar equations in one space dimension. Numerical experiments seem to suggest the theoretical error estimates to be sharp.

Numerical investigation of the mesh-free collocation approach for solving third kind VIEs with nonlinear vanishing delays

The principal purpose of this investigation is to present an approximate algorithm for solving third-kind Volterra integral equation with nonlinear vanishing delays using mesh-free techniques based on a radial basis function collocation scheme. This technique does not require background approximation cells, and the algorithm is efficient, has good stability and does not require much computer memory. A description of the approach for the proposed equations is provided. The error estimation of the proposed approach is also provided. The accuracy and reliability of the new scheme are demonstrated through numerical examples. Some of these examples have been compared with analytical solutions and moving least squares methods. The numerical results validate their agreement with theoretical error estimates.

Polytopal discontinuous Galerkin discretization of brain multiphysics flow dynamics

A comprehensive mathematical model of the multiphysics flow of blood and Cerebrospinal Fluid (CSF) in the brain can be expressed as the coupling of a poromechanics system and Stokes' equations: the first describes fluids filtration through the cerebral tissue and the tissue's elastic response, while the latter models the flow of the CSF in the brain ventricles. This model describes the functioning of the brain's waste clearance mechanism, which has been recently discovered to play an essential role in the progress of neurodegenerative diseases. To model the interactions between different scales in the porous medium, we propose a physically consistent coupling between Multi-compartment Poroelasticity (MPE) equations and Stokes' equations. In this work, we introduce a numerical scheme for the discretization of such coupled MPE-Stokes system, employing a high-order discontinuous Galerkin method on polytopal grids to efficiently account for the geometric complexity of the domain. We analyze the stability and convergence of the space semidiscretized formulation, we prove a-priori error estimates, and we present a temporal discretization based on a combination of Newmark's β-method for the elastic wave equation and the θ-method for the other equations of the model. Numerical simulations carried out on test cases with manufactured solutions validate the theoretical error estimates. We also present numerical results on a two-dimensional slice of a patient-specific brain geometry reconstructed from diagnostic images, to test in practice the advantages of the proposed approach.

On a Stability of Non-Stationary Discrete Schemes with Respect to Interpolation Errors

The aim of this article is to analyze the efficiency and accuracy of finite-difference and finite-element Galerkin schemes for non-stationary hyperbolic and parabolic problems. The main problem solved in this article deals with the construction of accurate and efficient discrete schemes on nonuniform and dynamic grids in time and space. The presented stability and convergence analysis enables improving the existing accuracy estimates. The obtained stability results show explicitly the rate of accumulation of interpolation and projection errors that arise due to the movement of grid points. It is shown that the cases when the time grid steps are doubled or halved have different stability properties. As an additional technique to improve the accuracy of discretizations on non-stationary space grids, it is recommended to use projection operators instead of interpolation operators. This technique is used to solve a test parabolic problem. The results of specially selected computational experiments are also presented, and they confirm the accuracy of all theoretical error estimates obtained in this article.

Highly Accurate Method for a Singularly Perturbed Coupled System of Convection–Diffusion Equations with Robin Boundary Conditions

This paper’s major goal is to provide a numerical approach for estimating solutions to a coupled system of convection–diffusion equations with Robin boundary conditions (RBCs). We devised a novel method that used four homogeneous RBCs to generate basis functions using generalized shifted Legendre polynomials (GSLPs) that satisfy these RBCs. We provide new operational matrices for the derivatives of the developed polynomials. The collocation approach and these operational matrices are utilized to find approximate solutions for the system under consideration. The given system subject to RBCs is turned into a set of algebraic equations that can be solved using any suitable numerical approach utilizing this technique. Theoretical convergence and error estimates are investigated. In conclusion, we provide three illustrative examples to demonstrate the practical implementation of the theoretical study we have just presented, highlighting the validity, usefulness, and applicability of the developed approach. The computed numerical results are compared to those obtained by other approaches. The methodology used in this study demonstrates a high level of concordance between approximate and exact solutions, as shown in the presented tables and figures.

Mathematical Modeling of Eigenvibrations of the Shallow Shell with an Attached Oscillator

For the problem of eigenvibrations of the shallow shell with an attached oscillator, a new symmetric variational statement in the Hilbert space was proposed. It was established that there exist a sequence of positive eigenvalues of finite multiplicity with a limit point at infinity and the corresponding complete orthonormal system of eigenvectors. The problem was approximated by the mesh scheme of the finite element method with Hermite finite elements. Theoretical error estimates for the approximate solutions were proved. The theoretical findings were verified by the results of numerical experiments.

Uncertainty quantification for random domains using periodic random variables

We consider uncertainty quantification for the Poisson problem subject to domain uncertainty. For the stochastic parameterization of the random domain, we use the model recently introduced by Kaarnioja et al. (SIAM J. Numer. Anal., 2020) in which a countably infinite number of independent random variables enter the random field as periodic functions. We develop lattice quasi-Monte Carlo (QMC) cubature rules for computing the expected value of the solution to the Poisson problem subject to domain uncertainty. These QMC rules can be shown to exhibit higher order cubature convergence rates permitted by the periodic setting independently of the stochastic dimension of the problem. In addition, we present a complete error analysis for the problem by taking into account the approximation errors incurred by truncating the input random field to a finite number of terms and discretizing the spatial domain using finite elements. The paper concludes with numerical experiments demonstrating the theoretical error estimates.

Elzaki projected differential transform method for multi-dimensional aggregation and combined aggregation-breakage equations

Numerous real-world fields, including planetary science, bio-pharmaceutical, chemical study, food processing industry, and many more are profoundly impacted by population balance equations. Model complexity limits the analytical investigations to a few aggregation-breakage parameters, although various numerical and semi-analytical schemes are available. This article proposes a new semi-analytical approach, the Elzaki integral transform as a pre-treatment to reinforce domain decomposition for better accuracy and convergence, in conjunction with the projected differential transform method for finding the closed form or approximated series solutions for non-linear aggregation, aggregation-breakage, and multi-dimensional aggregation equations. The technique’s key benefit over traditional numerical methods is its ability to solve linear or non-linear differential equations directly without discretization or linearization. Theoretical convergence analysis and error estimates of series solutions for both one and two dimensional aggregation models are of particular interest. Finally, several numerical examples of aggregation, aggregation-breakage, and two dimensional aggregation equations are taken to validate the accuracy of the proposed method by comparing numerical simulations with exact solutions. Interestingly, we have obtained closed form solutions for the pure aggregation equation when considering constant and product aggregation kernels. Additionally, error tables and graphs help to highlight the method’s innovative nature.

The numerical solution of a time-delay model of population growth with immigration using Legendre wavelets

The paper addresses a computational method to simulate more accurate models for population growth with immigration, focusing on integral equations (IEs) featuring a delay parameter in the time variable. The proposed method utilizes Legendre wavelets within the Galerkin scheme as a orthonormal basis. Legendre wavelets are known for their localized functions, offering suitable precision and stability in simulating time-delay biological models. This approach employs the composite Gauss-Legendre (CGL) quadrature rule to compute integrals appeared in the scheme. An error bound analysis demonstrates a convergence rate of order 2−Mk. Additionally, various numerical examples are presented to show the efficiency, accuracy and validate the theoretical error estimate of the novel technique.

Analysis and application of a time-domain finite element method for the Drude metamaterial perfectly matched layer model

In this paper, we develop a finite element method (FEM) to solve the Drude metamaterial perfectly matched layer (PML) model by edge elements. Both the stability analysis and error estimate for the scheme are established. To our best knowledge, this is the first paper on developing and analyzing a FEM for this Drude PML model. Numerical results are presented to justify the theoretical error estimate and demonstrate the effectiveness of this PML in absorbing outgoing waves in the Drude metamaterial.

An IMEX-based approach for the pricing of equity warrants under fractional Brownian motion models

In this paper, the pricing of equity warrants under a class of fractional Brownian motion models is investigated numerically. By establishing a new nonlinear partial differential equation (PDE) system governing the price in terms of the observable stock price, we solve the pricing system effectively by a robust implicit-explicit numerical method. This is fundamentally different from the documented methods, which first solve the price with respect to the firm value analytically, by assuming that the volatility of the firm is constant, and then compute the price with respect to the stock price and estimate the firm volatility numerically. It is shown that the proposed method is stable in the maximum-norm sense. Furthermore, a sharp theoretical error estimate for the current method is provided, which is also verified numerically. Numerical examples suggest that the current method is efficient and can produce results that are, overall, closer to real market prices than other existing approaches. A great advantage of the current method is that it can be extended easily to price equity warrants under other complicated models. doi: 10.1017/S1446181123000159

Approximate Analytical Solution of Fuzzy Linear Volterra Integral Equation via Elzaki ADM

In this paper, the fuzzy Volterra integral equations’ solutions are calculated using a hybrid methodology. The combination of the Elzaki transform and Adomian decomposition method results in the development of a novel regime. The precise fuzzy solutions are determined using Elzaki ADM after the fuzzy linear Volterra integral equations are first translated into two crisp integral equations utilizing the fuzzy number in parametric form. Three instances of the considered equations are solved to show the established scheme’s dependability, efficacy, and application. The results have a substantial impact on the fuzzy analytical dynamic equation theory. The comparison of the data in a graphical and tabular format demonstrates the robustness of the defined regime. The lower and upper bound solutions’ theoretical convergence and error estimates are highlighted in this paper. A tolerable order of absolute error is also obtained for this inquiry, and the consistency of the outcomes that are approximated and accurate is examined. The regime generated effective and reliable results. The current regime effectively lowers the computational cost, and a faster convergence of the series solution to the exact answer is signaled.

On solving some Cauchy singular integral equations by de la Vallée Poussin filtered approximation

The paper deals with the numerical solution of Cauchy Singular Integral Equations based on some non standard polynomial quasi–projection of de la Vallée Poussin type. Such kind of approximation presents several advantages over classical Lagrange interpolation such as the uniform boundedness of the Lebesgue constants, the near–best order of uniform convergence to any continuous function, and a strong reduction of Gibbs phenomenon. These features will be inherited by the proposed numerical method which is stable and convergent, and provides a near-best polynomial approximation of the sought solution by solving a well conditioned linear system. The numerical tests confirm the theoretical error estimates and, in case of functions subject to Gibbs phenomenon, they show a better local approximation compared with analogous Lagrange projection methods.

Lepton–Nucleus Interactions within Microscopic Approaches

This review paper emphasizes the significance of microscopic calculations with quantified theoretical error estimates in studying lepton–nucleus interactions and their implications for electron scattering and accelerator neutrino oscillation measurements. We investigate two approaches: Green’s Function Monte Carlo and the extended factorization scheme, utilizing realistic nuclear target spectral functions. In our study, we include relativistic effects in Green’s Function Monte Carlo and validate the inclusive electron scattering cross section on carbon using available data. We compare the flux-folded cross sections for neutrino-carbon scattering with T2K and MINERνA experiments, noting the substantial impact of relativistic effects in reducing the theoretical curve strength when compared to MINERνA data. Additionally, we demonstrate that quantum Monte Carlo-based spectral functions accurately reproduce the quasi-elastic region in electron scattering data and T2K flux-folded cross sections. By comparing results from Green’s Function Monte Carlo and the spectral function approach, which share a similar initial target state description, we quantify errors associated with approximations in the factorization scheme and the relativistic treatment of kinematics in Green’s Function Monte Carlo.

Highly Accurate Method for Boundary Value Problems with Robin Boundary Conditions

The main aim of the current paper is to construct a numerical algorithm for the numerical solutions of second-order linear and nonlinear differential equations subject to Robin boundary conditions. A basis function in terms of the shifted Chebyshev polynomials of the first kind that satisfy the homogeneous Robin boundary conditions is constructed. It has established operational matrices for derivatives of the constructed polynomials. The obtained solutions are spectral and are consequences of the application of collocation method. This method converts the problem governed by their boundary conditions into systems of linear or nonlinear algebraic equations, which can be solved by any convenient numerical solver. The theoretical convergence and error estimates are discussed. Finally, we support the presented theoretical study by presenting seven examples to ensure the accuracy, efficiency, and applicability of the constructed algorithm. The obtained numerical results are compared with the exact solutions and results from other methods. The method produces highly accurate agreement between the approximate and exact solutions, which are displayed in tables and figures.