Temporal Release Research Articles

Numerical study on K/S/Cl release during devolatilization of pulverized biomass at high temperature

In this paper, the interaction between different organic and inorganic K/S/Cl compounds in the solid structure of biomass is studied and a model is presented to predict the temporal release of Kg, HCl, CH3Cl, KCl, KOH, K2SO4 and SO2 from biomass devolatilization. Four types of pulverized biomass are chosen from literature, two of which have no chlorine content and two with chlorine content in lower stoichiometry to potassium. The results of the model are compared with the experimental measurements. In the presence of chlorine, KCl, HCl and Kg were found to be the dominant chlorine and potassium species. In the absence of chlorine, Kg dominates the release of potassium. KOH and K2SO4 release into the gas phase towards the end of devolatilization due to the overlapping with char combustion. SO2 is the main sulfur species released into the gas phase. The model is coupled with a CFD solver where the gas phase chemistry of the K/S/Cl system can be studied using available chemical mechanisms for these species.

Liposomal delivery of antibiotic loaded nucleic acid nanogels with enhanced drug loading and synergistic anti-inflammatory activity against S. aureus intracellular infections

The persistence of Staphylococcus aureus has been accredited to its ability to escape immune response via host cell invasion. Despite the efficacy of many antibiotics against S. aureus, the high extracellular concentrations of conventional antibiotics required for bactericidal activity is limited by their low cellular accumulation and poor intracellular retention. While nanocarriers have received tremendous attention for antibiotic delivery against persistent pathogens, they suffer daunting challenges such as low drug loading, poor retention and untimely release of hydrophilic cargos. Here, a hybrid system (Van_DNL) is fabricated wherein nucleic acid nanogels are caged within a liposomal vesicle for antibiotic delivery. The central principle of this approach relies on exploiting non-covalent electrostatic interactions between cationic cargos and polyanionic DNA to immobilize antibiotics and enable precise temporal release against intracellular S. aureus. In vitro characterization of Van_DNL revealed a stable homogenous formulation with circular morphology and enhanced vancomycin loading efficiency. The hybrid system significantly sustained the release of vancomycin over 24 h compared to liposomal or nanogel controls. Under enzymatic conditions relevant to S. aureus infections, lipase triggered release of vancomycin was observed from the hybrid. While using Van_DNL to treat S. aureus infected macrophages, a dose dependent reduction in intracellular bacterial load was observed over 24 h and exposure to Van_DNL for 48 h caused negligible cellular toxicity. Pre-treatment of macrophages with the antimicrobial hybrid resulted in a strong anti-inflammatory activity in synergy with vancomycin following endotoxin stimulation. Conceptually, these findings highlight these hybrids as a unique and universal platform for synergistic antimicrobial and anti-inflammatory therapy against persistent infections.

Controlled Delivery of Immunomodulators from a Biomaterial Scaffold Niche to Induce a Tolerogenic Phenotype in Human Dendritic Cells.

Engineering a regulatory phenotype in dendritic cells (DCs) is a potential approach to circumvent an immune response against self-antigens in autoimmunity or alloantigens in allograft rejection. Cell microenvironments influence the differentiation of DC precursors into either proinflammatory/immunostimulatory or tolerogenic/regulatory DCs. Biomaterial-based vehicles can be used to re-engineer cell microenvironments and re-educate the DC phenotype. This study presents the development and validation of a biomaterial-based multicomponent immunomodulatory (MI) scaffold for the purpose of promoting a tolerogenic/regulatory DC phenotype. Glutaraldehyde-crosslinked gelatin microparticles, loaded with specific immunomodulators, were embedded into a porous agarose scaffold. Using the Weibull equation and the Bayesian approach, an empirical mathematical model was derived from the release profile data of "model" molecules. The scaffold design was generated from the model to achieve distinct temporal release profiles of the loaded immunomodulator(s): granulocyte monocyte colony-stimulating factor (GM-CSF), dexamethasone (DEX), and/or peptidoglycan (PGN). The MI scaffold-treated DCs (MI DCs) showed an increase in the expression of tolerogenic markers such as surface immunoglobulin-like transcript 3 (ILT-3) and secreted interleukin-10 (IL-10), with a simultaneous decrease in maturation markers such as CD86 and secreted interferon-γ (IFN-γ). In cell culture studies, these MI DCs were able to suppress T-cell proliferation. This approach is expected to enhance the generation of endogenous regulatory DCs when applied in vivo. This technology serves as a basis for future immunotherapeutic applications in the autoimmunity and allogeneic therapies. It also shows that empirical mathematical modeling can be used to engineer scaffold designs for distinct temporal release of one or more immunomodulators.

Temporal release behavior of potassium during pyrolysis and gasification of sawdust particles

The potassium release from sawdust in pyrolysis and gasification was studied using an online measurement method. The final results suggested that the potassium releases more in pyrolysis than that in CO2 gasification environment at 800-900 °C. The overall activation energies and pre-exponential factors of potassium release in pyrolysis and gasification were further derived. In addition, the additive chlorine influence on potassium release had been evaluated, and the results showed that the promoting effect of chlorine during pyrolysis was higher than the case during CO2 gasification. Thermodynamic calculations were done to predict the possible potassium species during pyrolysis and gasification. The K2CO3 (s) formation mostly contributed to the higher potassium release proportion in pyrolysis than that during CO2 gasification.

Alternating magnetic field mediated release of fluorophores from magnetic nanoparticles by hysteretic heating

This study explores the use of differential heating of magnetic nanoparticles with different sizes and compositions (MFe2O4 (M = Fe, Co)) for heteroplexed temporal controlled release of conjugated fluorophores from the surface of nanoparticles. By exploiting these differences, we were able to control the amount of hysteretic heating occurring with the distinct sets of magnetic nanoparticles using the same applied alternating magnetic field radio frequency (AMF-RF). Using thermally labile retro-Diels-Alder linkers conjugated to the surface of nanoparticles, the fluorescent payload from the different nanoparticles disengaged when sufficient energy was locally generated during hysteretic heating. 1H, 13C NMR, ESI-MS, and SIMS characterized the thermally responsive fluorescent cycloadducts used in this study; the Diels Alder cycloadducts were modeled using density functional theory (DFT) computations. The localized point heating of the different nanoparticle compositions drove the retro-Diels-Alder reaction at different times resulting in higher release rates of fluorophores from the CoFe2O4 compared to the Fe3O4 nanoparticles.

Study on the ignition characteristics and alkali release of single coal particles with additional different forms of potassium

The work concerned the ignition characteristics and alkali metals (Na and K) release behavior during the combustion process of single coal particles with the additional different forms of K contents. The measurement was performed in O2/N2 and O2/CO2 atmospheres. The high-speed camera was used to investigate the influences from different forms of potassium (KCl and K2CO3) on the ignition characteristics, and the temporal release behaviors of alkali metals were obtained with the detection of atomic emission spectrum of alkali metals (Na and K). The sample with additive of KCl has the higher emission intensity and lower ignition delay than that the sample with additive of K2CO3. The substituting CO2 for N2 had more effect for KCl than for K2CO3 addition in the initial stage of volatile combustion, but it reversed as burning progressed. The comparison of the gas phase temperature during the ignition with the appearance moment of the K emission could be further illustrated that the main reason affecting the release of atomic alkali metals was the presence of different form of potassium, which affected the liberation and diffusion rate of the volatiles.

Emerging NIR light-responsive delivery systems based on lanthanide-doped upconverting nanoparticles.

Together with the development of nanoscience, lanthanide (Ln)-doped upconversion nanoparticles (UCNPs), which can emit UV/VIS light upon irradiation by near-infrared laser sources, is emerging as one of the most favorable materials in the field of nanomedicines. Light-responsive drug delivery is known as an efficient strategy to achieve temporal and spatial controlled drug release. Compared to conventional light-sensitive drug delivery systems, UCNPs are endowed with many advantages, such as deeper tissue penetration and low toxicity. With their unique properties, UCNPs not only serve as potential optical probes for bioimaging but also perform a critical role in therapeutic applications through photon-triggered mechanisms. In particular, UCNPs in combination with different materials and delivery strategies could overcome therapy resistance and enhance therapeutic effectiveness. This article focuses on the current achievements in the last decade of modification methods, diagnostics, and designs of UCNP-based nanoplatforms for successful phototherapy, chemotherapy, and bioimaging.

Robust Data-Driven Auditory Profiling Towards Precision Audiology.

The sources and consequences of a sensorineural hearing loss are diverse. While several approaches have aimed at disentangling the physiological and perceptual consequences of different etiologies, hearing deficit characterization and rehabilitation have been dominated by the results from pure-tone audiometry. Here, we present a novel approach based on data-driven profiling of perceptual auditory deficits that attempts to represent auditory phenomena that are usually hidden by, or entangled with, audibility loss. We hypothesize that the hearing deficits of a given listener, both at hearing threshold and at suprathreshold sound levels, result from two independent types of “auditory distortions.” In this two-dimensional space, four distinct “auditory profiles” can be identified. To test this hypothesis, we gathered a data set consisting of a heterogeneous group of listeners that were evaluated using measures of speech intelligibility, loudness perception, binaural processing abilities, and spectrotemporal resolution. The subsequent analysis revealed that distortion type-I was associated with elevated hearing thresholds at high frequencies and reduced temporal masking release and was significantly correlated with elevated speech reception thresholds in noise. Distortion type-II was associated with low-frequency hearing loss and abnormally steep loudness functions. The auditory profiles represent four robust subpopulations of hearing-impaired listeners that exhibit different degrees of perceptual distortions. The four auditory profiles may provide a valuable basis for improved hearing rehabilitation, for example, through profile-based hearing-aid fitting.

Photoactive NO hybrids with pseudo-zero-order release kinetics for antimicrobial applications.

Bacterial infection is a major threat to the health and life of humans due to the development of drug resistance, which is related to biofilm formation. Nitric oxide (NO) has emerged as an important factor in regulating biofilm formation. In order to harness the potential benefits of NO and develop effective antibacterial agents, we designed and synthesized a new class of NO hybrids in which the active scaffold benzothienoazepine was tagged with a nitroso group and further conjugated with quaternary ammoniums or phosphoniums. The temporal release of NO from these hybrids can be achieved by photoactivation. Interestingly, the NO release follows a pseudo-zero-order kinetics, which is easily determined by measuring the fluorescent benzothienoazepine or NO. Compared to the positive control ciprofloxacin, the NO hybrid with triphenyl phosphonium (TPP) exhibited more effective activity against S. aureus biofilm in darkness. Irradiation of the NO hybrid led to higher inhibition against S. aureus biofilm compared to the parental NO hybrid in darkness or the corresponding NO-released product, indicating the combined effect of NO and the NO-released product. Therefore, this new class of NO hybrids includes very promising antimicrobial agents and this work provides a new way for the design of highly effective antimicrobial agents.

An electrochemical investigation into the effects of local and systemic administrations of sodium nitroprusside in brain extracellular fluid of mice

Sodium nitroprusside (SNP) is a nitric oxide (NO)-donor drug used clinically to treat severe hypertension, however, there are limitations associated with its mechanism of action that prevent widespread adoption. In particular, its impact on cerebral hemodynamics is controversial and direct evidence on its effects are lacking. Electrochemical methods provide an attractive option to undertake real time neurochemical measurements in situ using selective microsensors. Herein, we report the novel application of an existing platinum (Pt)-Nafion® sensor to measure the release of NO from SNP under in vitro and in vivo conditions. Initially, the temporal release of NO was measured and the effect of the reducing agent, ascorbic acid (AA), was elucidated in vitro. A combined microdialysis/NO sensor construct was implanted into the striatum of anaesthetised mice and the local perfusion of 10 mM SNP with/without AA resulted in increased NO concentration detected using the Pt-Nafion® sensor. Subsequently, the NO sensor, coupled with carbon paste electrodes (CPEs) for the electrochemical measurement of O2, were applied to investigate SNP effects in freely moving mice. A complex mechanism of action was identified that infers NO inhibition and biphasic O2 dynamics. The preliminary findings within support a strong cerebrovascular effect of systemic SNP administration that warrants careful consideration for clinical use.

Temporal release of a three-component protein subunit vaccine from polymer multilayers

Sustained antigen and adjuvant availability have been shown to improve antiviral immune responses following vaccination. Transcutaneous delivery of vaccines using microneedles has also shown promise and may be particularly relevant for mosquito-borne viruses. We aim to combine these traits to create a three-component Protein Subunit vaccine on Microneedle Arrays (PSMNs) for transcutaneous delivery using layer-by-layer (LbL) assembly. Polymer multilayer thin films were generated to co-deliver a model combination of three chemically distinct vaccine components, a dengue virus Envelope protein Domain III (EDIII) subunit antigen and two adjuvants, a double-stranded RNA (Poly (inosinic:cytidylic acid) (PolyI:C)) and an amphiphilic hexapeptide, Pam3CSK4. Following application of PSMNs to the skin, implanted thin films facilitated sustained and temporal release of individual vaccine components from polymer multilayers. By modulating LbL composition and architecture, component release profiles in the skin could be independently tuned to allow release of adjuvants and antigen from days up to two weeks. Uptake of antigen and adjuvant from implanted vaccine films by antigen-presenting cells was demonstrated using in vivo mouse and ex vivo human skin models. Overall, we believe that such modular vaccine strategies offer design principles for enhancing the immunogenicity of protein subunit vaccines.

The expression of anaerobic metabolites in sweat and sebum from human skin subjected to intermittent and continuous mechanical loading

Pressure ulcers (PUs) represent a substantial burden to both patients and healthcare providers. Accordingly, effective prevention strategies should follow early detection of PUs. Anaerobic metabolites, such as lactate and pyruvate, are promising noninvasive biomarkers indicative of tissue ischaemia, one of the major mechanisms leading to PU development. The aim of this study was to investigate if the temporal release profile of these metabolites in sweat and sebum is sensitive to detect local tissue changes resulting from prolonged mechanical loads.The sacrum of healthy volunteers was subjected to two different loading protocols. After a baseline measurement, the left and right side of the sacrum were subjected to continuous and intermittent loading regimen, respectively, at a pressure of 100 mmHg. Biomarker samples were collected every 20 min, with a total experimental time of 140 min. Sweat was collected at 37 ∘C and 80% relative humidity, and sebum at ambient conditions, from 11 to 13 volunteers, respectively. Both samples were analysed for lactate and pyruvate concentrations using ultra-high performance supercritical fluid chromatography mass spectrometry. Prior to analysis metabolite concentrations were normalized to individual baseline levels and, in the case of sweat, additional normalization was performed to an unloaded control site to account for fatigue of sweat glands.Although substantial variability was present, the temporal release profiles of both sweat and sebum metabolites reflected the applied loading regimen with increased levels upon load application, and recovery to baseline levels following load removal. Highest relative increases were 20% and 30% for sweat lactate and pyruvate, respectively, and 41% for sebum lactate. Sebum pyruvate was not present in quantifiable amounts. There was a linear correlation between the individual responses to intermittent and continuous loading.The present study revealed that metabolite biomarkers in both sweat and sebum were sensitive to the application of mechanical loads, indicative of local ischaemia within skin and soft tissues. Similar trends in metabolic biomarkers were observed in response to intermittent and continuous loading regimens in both sweat and sebum. Metabolites represent a potential means to monitor the health of loaded skin and soft tissues informing timely interventions of PU prevention.

Five hundred years of anthropogenic mercury: spatial and temporal release profiles**The submitted manuscript has been created by UChicago Argonne, LLC, Operator of Argonne National Laboratory (‘Argonne’). Argonne, a US Department of Energy Office of Science laboratory, is operated under Contract No. DE-AC02-06CH11357. The US Government retains for itself, and others acting on its behalf, a paid-up nonexclusive, irrevocable worldwide license

When released to the biosphere, mercury (Hg) is very mobile and can take millennia to be returned to a secure, long-term repository. Understanding where and when Hg was released as a result of human activities allows better quantification of present-day reemissions and future trajectories of environmental concentrations. In this work, we estimate the time-varying releases of Hg in seven world regions over the 500 year period, 1510–2010. By our estimation, this comprises 95% of all-time anthropogenic releases. Globally, 1.47 Tg of Hg were released in this period, 23% directly to the atmosphere and 77% to land and water bodies. Cumulative releases have been largest in Europe (427 Gg) and North America (413 Gg). In some world regions (Africa/Middle East and Oceania), almost all (>99%) of the Hg is relatively recent (emitted since 1850), whereas in South America it is mostly of older vintage (63% emitted before 1850). Asia was the greatest-emitting region in 2010, while releases in Europe and North America have declined since the 1970s, as recognition of the risks posed by Hg have led to its phase-out in commercial usage. The continued use of Hg in artisanal and small-scale gold mining means that the Africa/Middle East region is now a major contributor. We estimate that 72% of cumulative Hg emissions to air has been in the form of elemental mercury (Hg0), which has a long lifetime in the atmosphere and can therefore be transported long distances. Our results show that 83% of the total Hg has been released to local water bodies, onto land, or quickly deposited from the air in divalent (HgII) form. Regionally, this value ranges from 77% in Africa/Middle East and Oceania to 89% in South America. Results from global biogeochemical modeling indicate improved agreement of the refined emission estimates in this study with archival records of Hg accumulation in estuarine and deep ocean sediment.

Synthesis of an amphiphilic tetrazine derivative and its application as a liposomal component to accelerate release of encapsulated drugs

Tetrazine irreversibly reacts with dienophiles, and its derivatives find wide applications in the fields of biochemistry and biophysics. We have synthesized an amphiphilic tetrazine derivative (2-hexadecyl-N-(6-(6-(pyridin-2-yl)-1,2,4,5-tetrazine-3-yl)pyridin-3-yl)octadecanamide; 1), which has a hydrophilic tetrazine structure and hydrophobic alkyl chains. Liposomes composed of compound 1 and 1-palmitoyl-2-oleoylphosphatidylcholine (POPC) (PTz-liposome) were prepared. In search of a new drug delivery system (DDS), we investigated the viability of inverse electron-demand Diels-Alder, a reaction between tetrazine and 2-norbornene, on the surface of the liposomes to change membrane fluidity and promote spatial and temporal controlled release of the encapsulated drugs. Compound 1 was synthesized with a yield of 71%. MS analysis after incubation of 2-norbornene with PTz-liposome revealed the binding of 2-norbornene to tetrazine. Indium-111-labeled diethylenetriaminepentaacetic acid (111In-DTPA) was encapsulated inside PTz-liposome to evaluate the leakage of free 111In-DTPA from the liposomes quantitatively. After 24 h of adding 2-norbornene, the release percentage for PTz-liposome was significantly higher than that for the control liposome (without tetrazine structure). Furthermore, the membrane fluidity of the PTz-liposome was increased by adding 2-norbornene. These results suggested that the combination of dienophile and liposome containing a newly synthesized tetrazine derivative can be used as a controlled release DDS carrier.

Sequential Delivery of Dual Growth Factors from Injectable Chitosan-Based Composite Hydrogels.

Local administration of platelet-derived growth factor-BB (PGDF-BB) and bone morphogenetic protein-2 (BMP-2) in a sequential release manner could substantially promote bone healing. To achieve this goal, a delivery system that could sustain the release of PGDF-BB and BMP-2 by way of temporal separation was developed. One type of PGDF-BB-encapsulated alginate microsphere and another type of BMP-2-encapsulated microsphere with a core-shell structure were respectively produced using emulsification methods. These two types of microspheres were then embedded into chitosan/glycerophosphate hydrogel for constructing composite gels. Some of them were found to be injectable at ambient temperature and had thermo-sensitive features near physiological temperature and pH. The optimally formulated composite gels showed the ability to control the release of PGDF-BB and BMP-2 in a sequential fashion in which PDGF-BB was released earlier than BMP-2. In vitro release patterns indicated that the release rates could be significantly regulated by varying the embedded amount of the factor-encapsulated microspheres, which can in turn mediate the temporal separation release interval between PGDF-BB and BMP-2. The released PDGF-BB and BMP-2 were detected to be bioactive based on their respective effects on Balb/c 3T3 and C2C12 cells. These results suggest that the presently developed composite gels have the potential for bone repair by synergistically utilizing the early chemotactic effect of PDGF-BB and the subsequent osteogenic and angiogenic functions of PDGF-BB and BMP-2.

Experimental investigation on temporal release of potassium from biomass pellet combustion by flame emission spectroscopy

The paper presents experimental investigation on temporal release of potassium (K) from single biomass pellet combustion by Flame Emission Spectroscopy (FES). Through the analysis of spontaneous emission spectra and a calibration procedure, the concentration of gas phase potassium, temperature and thermal radiation during the whole process of biomass pellets combustion in a Hencken burner were measured simultaneously. Camphorwood and rice husk with volatile matter 87.93%, 69.12%, respectively, and K2O content from the ash analysis 7.99%, 1.8%, respectively, were used in the experiment. The effects of biomass composition and moisture content in the pellet on the temporal release of K were analyzed. Experimental results showed the three stages (devolatilization, char, and ash stage) of biomass pellets combustion can be distinguished by the changing points of K concentration, temperature and thermal radiation curves obtained by the FES. The volatile content in biomass pellet has effect on the release behavior of K. The change of moisture in biomass pellet may affect significantly the ratio of K release from biomass pellet with low volatile. The experimental investigation proves FES is feasible for on-line monitoring the K release and combustion process of biomass pellet.

Construction of Dopamine-Releasing Gold Surfaces Mimicking Presynaptic Membrane by On-Chip Electrochemistry.

We report a strategy to construct a dopamine-releasing gold surface mimicking a presynaptic membrane on a microfluidic chip to simulate in vivo neural signaling. We constructed dopamine self-assembled monolayers (DA SAMs) by electrochemical deprotection of methyl group-protected DA SAMs on a gold surface. Electrochemically controllable release of DA SAMs can be realized by applying nonhydrolytic negative potential on the gold surface. Our method in constructing DA SAMs avoids the polymerization and protonation of DA molecules which may lead to the failure of the DA SAM formation. By combining microfluidics, we realized spatial and temporal controllable release of DA by electrochemistry from the gold surface. Furthermore, by culturing neurons on the patterned DA SAMs, the interface between the DA SAMs and the neurons could serve as a presynaptic membrane, and the spatiotemporal release of DA could modulate the neuron activity with high precision. Our study holds great promise in the fields of neurobiology research and drug screening.

Relating Advanced Electrospun Fiber Architectures to the Temporal Release of Active Agents to Meet the Needs of Next-Generation Intravaginal Delivery Applications.

Electrospun fibers have emerged as a relatively new delivery platform to improve active agent retention and delivery for intravaginal applications. While uniaxial fibers have been explored in a variety of applications including intravaginal delivery, the consideration of more advanced fiber architectures may offer new options to improve delivery to the female reproductive tract. In this review, we summarize the advancements of electrospun coaxial, multilayered, and nanoparticle-fiber architectures utilized in other applications and discuss how different material combinations within these architectures provide varied durations of release, here categorized as either transient (within 24 h), short-term (24 h to one week), or sustained (beyond one week). We seek to systematically relate material type and fiber architecture to active agent release kinetics. Last, we explore how lessons derived from these architectures may be applied to address the needs of future intravaginal delivery platforms for a given prophylactic or therapeutic application. The overall goal of this review is to provide a summary of different fiber architectures that have been useful for active agent delivery and to provide guidelines for the development of new formulations that exhibit release kinetics relevant to the time frames and the diversity of active agents needed in next-generation multipurpose applications.

Effect of Oral Physiology Parameters on In-Mouth Aroma Compound Release Using Lipoprotein Matrices: An In Vitro Approach.

Temporal aroma compound release during eating is a function of the physicochemical properties of the food matrix, aroma compounds, and oral physiology of individuals. However, the influence of each parameter on the release of each aroma component should be clarified. Two flavored lipoprotein matrices varying in composition were chewed in a chewing simulator that reproduced most of the physiological functions of the mouth. Aroma compound releases (butanoic acid, 2-heptanone, ethyl butyrate, 3-octanone, and 2-nonanone) were followed in real time by direct connection of the device to APCI-MS (atmospheric pressure chemical ionization mass spectrometry). Each oral parameter was controlled and decoupled using the in vitro device. The food matrix composition had only a low impact on aroma compound release, but the controlled oral parameters had significantly different influences on the release of aroma compounds according to their physicochemical characteristics. The release of certain compounds seemed more sensitive to bite force, while others seemed more sensitive to the shearing angle. The salivary flow rate primarily influenced the more hydrophobic compounds. Significant interactions were also observed between shear angle, salivary flow rate, and lipoprotein matrix composition, mainly for the release of the more hydrophobic volatile compounds; this needs further investigations to be clarified.

MiRNA profiling of urinary exosomes to assess the progression of acute kidney injury

Because exosomes have gained attention as a source of biomarkers, we investigated if miRNAs in exosomes (exo-miRs) can report the disease progression of organ injury. Using rat renal ischemia-reperfusion injury (IRI) as a model of acute kidney injury (AKI), we determined temporally-released exo-miRs in urine during IRI and found that these exo-miRs could reliably mirror the progression of AKI. From the longitudinal measurements of miRNA expression in kidney and urine, we found that release of exo- miRs was a regulated sorting process. In the injury state, miR-16, miR-24, and miR-200c were increased in the urine. Interestingly, expression of target mRNAs of these exo-miRs was significantly altered in renal medulla. Next, in the early recovery state, exo-miRs (miR-9a, miR-141, miR-200a, miR-200c, miR-429), which share Zeb1/2 as a common target mRNA, were upregulated together, indicating that they reflect TGF-β-associated renal fibrosis. Finally, release of exo-miRs (miR-125a, miR-351) was regulated by TGF-β1 and was able to differentiate the sham and IRI even after the injured kidneys were recovered. Altogether, these data indicate that exo-miRs released in renal IRI are associated with TGF-β signaling. Temporal release of exo-miRs which share targets might be a regulatory mechanism to control the progression of AKI.