Treatment Technologies Research Articles

Technological Advancements and Prospects for Near-Zero-Discharge Treatment of Semi-Coking Wastewater

This review examines the technological bottlenecks, potential solutions, and future development directions in the treatment and resource utilization of semi-coking wastewater (SCOW) in China. By comprehensively investigating the semi-coking industry and analyzing wastewater treatment research hotspots and existing projects, this study systematically explores the current status and challenges of each treatment unit, emphasizing the necessity for innovative wastewater treatment technologies that offer high efficiency, engineering feasibility, environmental friendliness, and effective resource recovery. This review highlights prospects and recommendations, including the development of novel extractants for phenol and ammonia recovery, a deeper understanding of biological enhancement mechanisms, exogenous bio-enhancement materials, and the creation of cost-effective advanced oxidation process (AOP)-based combined processes. Additionally, it underscores the potential for repurposing SCOW as a valuable resource through appropriate treatment, whether recycling for production or other applications.

Scaling and wetting resistant silica nanoparticle grafted multi-scale corrugated omniphobic membranes for membrane distillation

Membrane distillation (MD) is a promising technology for wastewater treatment, but often faces significant challenges of scaling and wetting. Development of advanced omniphobic membranes has been the core research for mitigating scaling and wetting in MD. In this study, a novel fluorinated multi-scale silicon nanoparticle grafted corrugated (FSiC-PVDF) membrane (water contact angle 179.5 ± 0.3°) was prepared and explored for enhancement of anti-scaling performance by calcium sulfate and anti-wetting performance by sodium dodecylsulfate (SDS). Silica nanoparticles (SiNPs) were synthesized and covalently bonded to the surface of the corrugated membrane and the surface energy was further reduced via chemical fluorination. Flat-sheet membrane (F-PVDF) and corrugated membrane (C-PVDF) were compared. Results showed that compared to the previous study of grafting SiNPs on flat membranes directly, FSiC-PVDF exhibited superior flux (21.1 kg/(m2·h)), and it can consistently demonstrate stable water flux and quality even at high calcium sulfate and SDS concentrations. The F-PVDF experienced significant declines in performance, and the C-PVDF showed limited improvement in scaling and wetting resistance. Corrugation pattern contributed to a larger evaporation area and higher velocity near the membrane surface, thus reducing crystal deposition and heterogeneous nucleation on the surface. The combination of corrugation and SiNPs resulted in a stable Cassie-Baxter wetting state, reduced solid-liquid interface areas, and created slippage conditions that minimized the impact of contaminants on MD performance. These findings indicated that FSiC-PVDF membranes offer significant advantages for MD processes, enhancing operational stability and efficiency.

The Effect of the National Specially Monitored Firms Program on Water-Polluting Firms’ Green Total Factor Productivity

Since 2007, the National Specially Monitored Firms (NSMF) program has been a key instrument in the Chinese government’s environmental regulation efforts and a crucial approach for achieving sustainable development in China. There is limited literature examining its effect on green total factor productivity (GTFP). This study investigates the effect of this policy on water-polluting firms’ GTFP using pollution discharge data from Chinese industrial firms and employing a time-varying difference-in-differences model. The findings illustrate that (1) the NSMF program significantly enhances the GTFP of water-polluting firms, primarily by promoting technological progress; (2) the NSMF program advances water-polluting firms’ GTFP through three channels: alleviating financing constraints, improving human capital, enhancing pollution treatment technologies. This study provides empirical evidence on the effectiveness of the NSMF program, offering valuable insights for the formulation of command-and-control environmental regulations and the pursuit of sustainable social development in the future.

Household Waste Water Treatment using Activated Charcoal: An Effective and Sustainable Approach

Effective household wastewater management is crucial for environmental sustainability and public health, especially in areas with limited advanced treatment infrastructure. This study explores the use of activated charcoal as a cost-effective and efficient method for treating household wastewater. Known for its high adsorption capacity, activated charcoal was evaluated for its ability to remove key contaminants from wastewater collected from residential sources such as kitchens, bathrooms, and laundry areas. The research utilized both batch adsorption tests and column filtration experiments. In the batch tests, wastewater samples were treated with varying doses of activated charcoal (2, 5, 10, and 15 g/L) over different contact times (30 minutes to 4 hours). The results showed that activated charcoal effectively reduced Total Suspended Solids (TSS), Chemical Oxygen Demand (COD), and Biological Oxygen Demand (BOD), with average reductions of 75%, 65%, and 70%, respectively. Additionally, activated charcoal demonstrated significant effectiveness in removing heavy metals and organic compounds, with removal efficiencies ranging from 60% to 80% depending on the contaminant type and operational conditions. The optimal treatment conditions were found to be a dosage of 10 g/L and a contact time of 2 hours. Future research could focus on optimizing regeneration processes and exploring hybrid systems that combine activated charcoal with other treatment technologies to further enhance performance.

Supramolecular Chemistry of Polymer-Based Molecular Tweezers: A Minireview

Polymer-based molecular tweezers have emerged as a prominent research area due to their enhanced ability to form host–guest complexes, driven by advancements in their design and synthesis. The impact of the spacer structure on the tweezers is predominant. They can be rigid, flexible, and stimuli-responsive. Herein, a new generation of molecular tweezers is introduced as polymer-based molecular tweezers. The integration of molecular tweezers onto biopolymers has significantly expanded their potential applications, making them promising candidates, especially in drug delivery, owing to their biocompatibility, adaptive structural features, and versatile interaction capabilities. The unique structure of polymer-based molecular tweezers, particularly when integrated with biopolymers, creates a unique nano-environment that enhances their interaction with guest molecules. This minireview focuses on the synthesis and applications of polymer-based molecular tweezers and examines how the incorporation of various spacers affects their binding affinity and specificity. These features highlight the advancement of these polymer-based systems, emphasizing their potential applications, particularly in drug delivery, water treatment technology, and future research opportunities.

Occurrence, sustainable treatment technologies, potential sources, and future prospects of emerging pollutants in aquatic environments: a review

Occurrence, sustainable treatment technologies, potential sources, and future prospects of emerging pollutants in aquatic environments: a review

1 T/2 H mixed phase MoS2 nanosheets decorated with Ag nanoparticles for effective photocatalysis of organic dyes for wastewater treatment

The rapid industrialization and urbanization have led to the proliferation of organic dyes in wastewater, necessitating the development of efficient and sustainable treatment technologies. We report here a novel photocatalyst based on 1 T/2 H mixed-phase molybdenum disulfide nanosheets (1 T/2 H-MoS2 NSs) decorated with silver (Ag) nanoparticles for the enhanced photodegradation of both cataionic and anionic organic dyes under natural sunlight. Hydrothermally synthesized silver nanoparticles decorated 1 T/2 H MoS2 nanosheets (Ag-1 T/2 H MoS2 NSs) are characterized through X-ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Transmission Electron Microscopy (TEM), Raman spectroscopy, UV–vis spectroscopy, and Photoluminescence (PL) spectroscopy. FESEM results reveal that MoS2 NSs of thickness 17 nm clustered into nanoflowers where Ag nanoparticles are embedded in them. XRD results show the characteristic diffraction peaks at 2ϴ value 9.80 and 32.380 for (002) and (100) planes respectively. Photocatalytic performance has been evaluated by the degradation of Crystal Violet (CV) and Methyl Orange (MO) under direct sunlight irradiation. Nanocomposites exhibit a significant improvement in degradation efficiency i.e. 97 % for both (CV) and (MO) in 15 minutes and 25 minutes respectively compared to pure MoS2. The superior activity of the Ag-1 T/2 H MoS2 composite is attributed to the synergistic effects of the mixed-phase MoS2 structure and the charge transfer phenomenon provided by Ag nanoparticles. This work highlights the potential of Ag-1 T/2 H MoS2 NSs as an effective photocatalyst for the treatment of dye-contaminated wastewater.

Understanding the Selective Removal of Perfluoroalkyl and Polyfluoroalkyl Substances via Fluorine-Fluorine Interactions: A Critical Review.

As regulatory standards for per- and polyfluoroalkyl substances (PFAS) become increasingly stringent, innovative water treatment technologies are urgently demanded for effective PFAS removal. Reported sorbents often exhibit limited affinity for PFAS and are frequently hindered by competitive background substances. Recently, fluorinated sorbents (abbreviated as fluorosorbents) have emerged as a potent solution by leveraging fluorine-fluorine (F···F) interactions to enhance selectivity and efficiency in PFAS removal. This review delves into the designs and applications of fluorosorbents, emphasizing how F···F interactions improve PFAS binding affinity. Specifically, the existence of F···F interactions results in removal efficiencies orders of magnitude higher than other counterpart sorbents, particularly under competitive conditions. Furthermore, we provide a detailed analysis of the fundamental principles underlying F···F interactions and elucidate their synergistic effects with other sorption forces, which contribute to the enhanced efficacy and selectivity. Subsequently, we examine various fluorosorbents and their synthesis and fluorination techniques, underscore the importance of accurately characterizing F···F interactions through advanced analytical methods, and emphasize the significance of this interaction in developing selective sorbents. Finally, we discuss challenges and opportunities associated with employing advanced techniques to guide the design of selective sorbents and advocate for further research in the development of sustainable and cost-effective treatment technologies leveraging F···F interactions.

Gels for Water Remediation: Current Research and Perspectives.

The development of cost-effective and high-performance technologies for wastewater treatment is essential for achieving a sustainable economy. Among the various methods available for water remediation, adsorption is widely recognized as an effective and straightforward approach for removing a range of pollutants. Gel materials, particularly hydrogels and aerogels, have attracted significant research interest due to their unique properties. Hydrogels, for instance, are noted for their ability to be regenerated and reused, ease of separation and handling, and suitability for large-scale applications. Additionally, their low cost, high water absorption capacity, and contribution to environmental protection are important advantages. Aerogels, on the other hand, are distinguished by their low thermal conductivity, transparency, flexibility, high porosity, mechanical strength, light weight, large surface area, and ultralow dielectric constant. This review provides a comprehensive analysis of the current literature, highlighting gaps in knowledge regarding the classification, preparation, characterization, and key properties of these materials. The potential application of hydrogels and aerogels in water remediation, particularly in removing contaminants such as dyes, heavy metals, and various organic and inorganic pollutants, is also discussed.

Effect of Thiophene-Hydrazinyl-Thiazole derivative as an efficient dye sensitizer and performance enhancer of TiO2 toward rhodamine B photodegradation

Visible-light-driven photocatalysis is an eco-friendly technology for wastewater treatment, where TiO2-based photocatalysts displayed outstanding performance in this regard. Dye sensitization is a promising approach for overcoming the common drawbacks of TiO2via improving its photocatalytic performance and extending its activity to visible light. Herein, we demonstrate the synthesis of the Thiophene-Hydrazinyl-Thiazole (THT) derivative as a novel organic dye sensitizer to be employed as a visible-light antenna for TiO2 nanoparticles. The physicochemical characteristics of the as-synthesized TiO2-based nanoparticles are examined by different techniques, which revealed the successful fabrication of the proposed THT-TiO2 heterojunction. The incorporation of THT molecules on the TiO2 surface led to slight disorders and deformation in the crystal lattice of TiO2, a remarkable improvement of its absorption in the visible light as a perfect visible-light antenna in the whole visible region, and significant enhancement in the charge transfer. Rhodamine B (RhB) is used as an organic dye model to assess the photocatalytic efficiency of the as-fabricated THT-TiO2 photocatalyst which achieved almost complete degradation (>95% in 150 min) with an observed rate constant (kobs) of 0.0164 min−1; total organic carbon (TOC) measurements suggested ∼75% mineralization. THT-TiO2 achieved 2.1-fold enhancement in photodegradation% and 4.1-fold enhancement in kobs compared to the bare TiO2. THT showed good activity under visible-light irradiation (RhB degradation% was >66% in 150 min and kobs = 0.0085 min−1). The influence of the initial pH of the solution was investigated and pH 4 was the optimum pH value for suitable interaction between RhB and the surface of THT-TiO2. Radical quenching experiments were conducted to assess the crucial reactive species where the ∙OH and O2.− were the most reactive species. THT-TiO2 showed promising stability over three successive cycles. Finally, the improvement mechanism of the photocatalytic activity of THT-TiO2 was attributed to the electron injection from the excited THT (the dye sensitizer) to TiO2 and enhanced charge separation.

A novel electrochemical membrane filtration system operated with periodical polarity reversal for efficient resource recovery from nickel nitrate laden industrial wastewater

The economical and efficient removal of nickel nitrate from industrial wastewater remains a challenge. Herein, we developed an innovative electrochemical membrane filtration system that used a periodic polarity reversal process to adjust the acid-base environment near membrane interface for the recovery of nickel (II) and ammonia. The Ru based electrocatalytic layer could boost the selective reduction of nitrate to ammonia by generating atomic hydrogen, resulting in the precipitation of Ni2+ by the increasing pH at the membrane interface. Then, the precipitation of Ni(OH)2 could be effectively stripped and collected under the periodic polarity reversal process. In-situ interfacial measurements demonstrated that the polarity reversal process enabled a reversible transformation between strongly acidic (pH < 2) and alkaline (pH > 13) environments within a 200 µm range at the membrane interface. In continuous flow operation treating real industrial wastewater containing 96.7 mg-N L−1 nitrate and 135.0 mg L−1 Ni2+, the system demonstrated the capability to achieve 92.5 ± 2.6 % nitrate removal (with a recovery efficiency of 15.1 ± 1.9 g-NH3 kWh−1) and 99.7 ± 0.1 % Ni²⁺ removal (with a recovery efficiency of 24.9 ± 2.4 g-Ni kWh−1). Additionally, the specific treatment cost was approximately $0.17 m−3, attributed to the recovery of Ni(OH)₂ and ammonia. Furthermore, this system could deliver a significant economic benefit ($1.64 per m3) for treating a high concentration real wastewater (331.5 mg-N L−1 nitrate and 1496.3 mg L−1 Ni2+), outperforming traditional alkali precipitation and biological nitrification/denitrification processes. Overall, our study presents an economical and sustainable method for recovering valuable chemicals from wastewater containing heavy metals and inorganic nitrogen, potentially advancing cost-effective water treatment technologies.

Machine learning to guide the use of plasma technology for antibiotic degradation

Antibiotics are misused and discharged into environmental water, posing a constant potential threat to the ecosystem. Utilising plasma’s physical and chemical effects to remove antibiotics has emerged as a promising wastewater treatment technology. However, the complexity and high cost of reactor configurations represent significant limitations to the practical application of this technology. Furthermore, evaluating the degradation efficiency of antibiotics necessitates using costly and sophisticated testing instruments, coupled with time-consuming and labour-intensive experiments. The present study developed a generalised model using machine learning algorithms to predict the removal efficiency of antibiotics by a plasma system. Of the eight machine learning algorithms constructed, the ensemble model XGBoost exhibited the highest prediction accuracy, as indicated by a Pearson correlation coefficient of 0.943. This correlation indicates a strong relationship between the predicted removal rates and the experimental values. Moreover, the accuracy of the prediction was enhanced through the utilisation of a multi-model stacking approach. A further quantitative assessment of the key factors affecting the efficiency of the plasma process, and their synergistic effects, is provided by the interpretable analysis of the model’s behaviour. It is anticipated that the results will facilitate the design of efficient plasma systems, reduce the need for extensive experimental screening, and improve practical applications in the removal of antibiotic contamination. This provides an informative view of the applications of plasma technology, opening the way for new environmental research questions.

Scaling-up the use of macroscopic photo-CWPO La1-xTixFeO3/SiC alveolar foam catalyst for solar water treatment against micropollutants

Current wastewater treatment plants are not prepared for the removal of micropollutants like phenol, pharmaceuticals and pesticides in water. As their release into the environment has adverse consequences towards the living organisms of ecosystems, the engineering of novel sustainable processes able to ultimately remove the emerging organic contaminants is an objective of paramount importance. Hereby we report for the first time on the successful scale-up of a macroscopic photo-CWPO La1-xTixFeO3/SiC alveolar foam catalyst used at the pilot-plant scale inside a Compound Parabolic Collectors based photoreactor. The removal of a span of organic micropollutants in water matrices of different complexity was efficiently realized under natural solar radiation using H2O2 or persulfates as oxidizing agent. The water matrix composition affected the efficiency of the degradation process. Using H2O2, for a collected energy of ca. 27 KJ/mol, the rate of micropollutant removal ranged from 53 % to 95 % in distilled water depending on the micropollutant in a cocktail configuration. It was lowered to the 17–66 % range in tap water, and to the 8–42 % range in simulated urban wastewater. The results demonstrated the promise of using sodium persulfate as oxidant instead of H2O2, with a better efficiency towards the removal of most of the micropollutants tested. The use of the sodium persulfate oxidant allows for overcoming the drawbacks associated to the treatment of real water matrices observed using H2O2, as better performances were reached when increasing the water matrix complexity. Complete removal of carbamazepine and diclofenac micropollutants was reached in tap water and simulated urban wastewater for ca. 27 KJ/mol of collected energy. The degradation performances combined to the catalyst robustness make this water treatment technology promising for operating in a continuous way under natural solar light.

Omics technologies in diagnosis and treatment of soft tissue sarcomas

Omics technologies in diagnosis and treatment of soft tissue sarcomas

A Mini Review on the Opportunities for Membrane Pervaporation Technology for Energy-efficient Removal of Dispersed Oil and Dissolved Hydrocarbons from Produced Water

Produced water is reported to have the largest volume of waste stream associated with hydrocarbon recovery. It was estimated to increase from 250 million B/D in 2007 to more than 300 million B/D between 2010 and 2012. Market research conducted by Adroit put the globally produced water treatment market at a value of USD 5.10 billion in 2022. This value is anticipated to be USD 9.80 billion in 2032 at a compound annual growth rate (CAGR) of 5.80% over the prediction period. Oil and gas companies have been mandated to comply with the newly enacted environmental regulations that require extensive treatment of this water before discharge or reuse. The limited quantity of freshwater resources coupled with the increasing oil and gas production activities has made it necessary for all stakeholders to look for sustainable management of this water. Presently, a certain percentage of produced water is reused while the rest is discharged into the ocean. In both cases, the water needs to be thoroughly treated. The choice of technologies for produced water treatment depends on numerous factors, such as the chemical composition of the water and the level of purity that must be attained before disposal, recycling, or re-use. Some of the technologies used for produced water treatment include physical separation methods such as gravity, adsorption, filtration, coalescence, cyclones, flotation, centrifuges, membranes, and oxidation. There are also chemical and biological separation methods. Contaminants such as small droplets of dispersed oil and dissolved hydrocarbons (DODHs) are very challenging to remove using the above-listed water treatment technologies. Moreover, the use of membrane technology has been limited only to the use of reverse osmosis and membrane filtration for removing salinity, metals, and other inorganics. This article highlights the opportunities for the use of membrane vapor permeation and pervaporation for the removal of the small droplets of DODHs, which have been reported to be very challenging contaminants to remove. The use of 3D printing technology for the fabrication of membrane materials was reviewed. The 3D membrane development method can be used to fabricate almost any shape of the material in a highly customized manner using computer-aided design. The information presented in this article will serve as a useful reference for the technologies used for a sustainable water treatment strategy in the oil and gas industry.

The large-scale sustainable utilization status of bauxite residue (red mud): challenges and perspectives for China

Red mud (abbreviated as RM) is a solid waste formed during the alumina refining process from bauxite. Every year, over 200 million tons of RM are discharged worldwide. China is a large producer of alumina, the entire amount of RM of China in storage exceeds 1 billion tons because there is no technology for large-scale treatment. Extensive studies on the sustainable utilization of RM have been conducted globally in recent decades. Thus, a detailed review is provided here. According to relevant data from institutions such as the International Aluminum Association, the critical situation of production and utilization of RM from 2011 to 2022 for the world and China are analyzed. This paper uses a comprehensive literature database to classify and statistically analyze red mud related publications from 2011 to 2022. The results show that research on the comprehensive utilization of red mud is mainly focused on three fields of metallurgy, construction, and environment. In these fields, the main issues of not achieving large-scale production of red mud in China are discussed. The results indicate that unclear responsibilities, high technical costs, lack of policies and standards, and insufficient cross-disciplinary collaboration are the main reasons. Suggestions of the utilization and development of RM have been proposed.

Phosphomolybdic acid functionalized nano silica for enhanced anti-biofouling effect in polymer electrolyte membranes for microbial fuel cell application

Microbial fuel cells (MFCs) represent a promising technology for simultaneous electricity generation and wastewater treatment. In this study, a single-chambered MFC was fabricated utilizing a novel polymer electrolyte membrane synthesized from sulfonated polyether ether ketone grafted with styrene sulfonic acid (SPEEK/SSA) as the base polymer, and silica decorated with phosphomolybdic acid (SPMA) as a functionalized nanofiller. Various concentrations of SPMA (2.5 %, 5 %, 7.5 %, and 10 %) were incorporated into the SPEEK/SSA membranes and characterized physicochemically. The SPEEK/SSA membrane with 5 wt% SPMA demonstrated the highest proton conductivity (3.75×10−2 S cm−1) and ion exchange capacity (1.68 meq g−1). This PEM also exhibited superior tensile strength (20 MPa) and excellent chemical durability, as evidenced by Fenton's reagent test. Performance evaluation revealed that this membrane achieved a maximum power density of 196.6 mW m−2 at a maximum of 180 mA m−2 current density. Additionally, antibiofouling tests indicated that the 5 % SPMA-incorporated membrane possessed significant antibacterial properties against both gram-positive and gram-negative bacteria and exhibited high biofilm inhibition. The wastewater treatment efficacy of the MFC with the 5 % SPMA membrane was confirmed by a chemical oxygen demand (COD) removal efficiency of 81.49 %, indicating its potential for effective wastewater treatment. Phylogenetic analysis through 16S rRNA sequencing identified major bacterial phyla including Proteobacteria, Bacteroidetes, Chloroflexi, and Firmicutes, with predominant genera such as Pseudomonas and Acidovorax. This study emphasises the potential of nanocomposite membranes to enhance the performance and durability of MFCs while mitigating biofouling, thereby paving the way for future research and development in this field.

Laccase surface-display for environmental tetracycline removal: From structure to function

Facing the increasingly prominent tetracycline pollution and the resulting environmental problems, how to find environmental and efficient treatment means is one of the current research hotspots. In this study, the laccase surface-display technology for tetracycline treatment was investigated. Via study, the type of anchoring protein had a minor influence on the laccase ability, while the type of laccase showed a major impact. Bacillus subtilis spore coat protein (CotA) exhibited higher laccase activity, stability, and efficiency in degrading tetracycline than Pleurotus ostreatus laccase 6 (Lacc6). The superiority of bacterial laccase over fungal laccase was elucidated from the perspective of crystal structure. Besides, a variety of technical means were used to verify the success of surface-display. pGSA-CotA surface-displayed bacteria exhibited good tolerance to high temperature, pH, and various heavy metals. Importantly, surface-displayed bacteria showed faster degradation efficiency and better treatment effects than the intracellular expression bacteria in tetracycline degradation. This implies that surface display technology has greater potential for laccase-mediated environmental remediation. Due to the adverse impacts of tetracycline on soil enzyme activity and microorganisms, our study found that pGSA-CotA surface-displayed bacteria can alleviate tetracycline stress in soil and partially activate the soil, thereby increasing soil enzyme activity and certain nitrogen cycling genes.

Enhanced luminescence efficiency in GaN-based blue laser diodes by H plasma technology

To the best of our knowledge, this paper is the first to report the application of H plasma treatment technology to the treatment of laser diode ridge. Through the H plasma passivation on the ridge of the laser diode, a neutral complexes layer (i.e., Mg-H) is formed on the ridge, which effectively reduces ridge leakage current, thus reducing the threshold current of the laser diode and significantly improving the slope efficiency. The ridge were treated with H plasma using the Oxford Plasmalab System 100 ICP 180. The lasers' leakage current, optical power, emission wavelength, and other parameters were measured using a Cascade150 + B1505A probe station system, along with matched optical power meters and fiber optic spectrometers. Specifically, this study successfully fabricates a GaN-based blue laser diode characterized by a threshold current as low as 0.42 A and a slope efficiency as high as 1.96 W/A. Compared with the traditional silicon oxide-mediated ridge treated laser, the threshold current of the laser passivated by H plasma is reduced by 0.13 A, and the slope efficiency is increased by 0.56 W/A. This research not only enhances the performance of laser diodes but also has the potential to expand their application in multiple fields.

From pollution to resource: advancing swine waste treatment in the USA

Concentrated animal feeding operations (CAFOs) have led to environmental challenges, specifically waste management. Swine CAFOs generate large amounts of waste, requiring proper treatment to avoid air and water pollution. Conventional waste management technologies, such as lagoon and spray field systems, do not prevent air and water pollution impacts. Research for the past few decades led to recommendations for waste treatment technologies superior to lagoons and spray fields. Private environmental sustainability initiatives focused on reducing greenhouse gas emissions in the food supply chain have implemented biogas digester projects for capturing methane in covered swine lagoons to reduce greenhouse gas emissions. However, research indicates that methane capture alone does not solve the broader pollution issues associated with lagoon and spray field systems still in use at these CAFOs to dispose of digested effluents. The Environmentally Superior Technologies (EST) initiative in North Carolina set public standards to eliminate waste discharge, reduce atmospheric emissions, and control odors and pathogens. Research has confirmed that technologies coupling solids separation with water treatments to remove volatile organic carbon, pathogens, and reactive forms of nitrogen can meet EST standards. A designated EST—the Super Soil System—substantially reduced odor by 99.9%; pathogens by 99.99%, nutrients (phosphorus and nitrogen) by &amp;gt;90%, and heavy metals (cooper and zinc) by 99%. The ammonia emissions were reduced by 94.4% for the warm and 99.0% for the cool season with respect to a conventional lagoon system. Corresponding greenhouse gas emission reductions were 96.7%. Components of designated EST can be applied to retrofit covered lagoons and anaerobic digestion systems with significant environmental benefits. Recommendations are proposed, based on the collective experience with EST and current trends in animal production concentration, for environmentally safe technologies to handle excess manure produced in the USA.