Synthetic Hydroxyapatite Materials Research Articles

Structure of biomimetic apatite grown on hydroxyapatite (HA)

Nanocrystalline hydroxyapatite (HA) is the bone mineral phase in vertebrate animals. When bones suffer illness or injuries, natural hydroxyapatite reconstructs and remodels its structure. It has been demonstrated that synthetic hydroxyapatite materials emulate bone properties and enhance bone-bonding ability through a biomimetic apatite coating, obtained when bioactive materials are immersed in a physiological-like media. In this research, the biomimetic apatite structure deposited in three synthetic hydroxyapatites (HAs: HAMS, HAUB, and HAUT), after being immersed in a simulated body fluid (SBF), is studied. The synthetic HAs are obtained by co-precipitation, using three different stirring methods: magnetic stirring (HAMS), ultrasonic bath (HAUB), and ultrasonic tip (HAUT). The synthetic HAs are characterized by X-Ray Diffraction (X-RD), High-Resolution Scanning Electron Microscopy (HR-SEM), Energy Dispersive X-ray (EDX) microanalysis and Transmission Electron Microscopy (TEM) before and after SBF assays. The crystal sizes of synthetic HAs are 12.567 nm, 15.188 nm, and 17.903 nm for HAMS, HAUB, and HAUT, respectively. Additionally, HAs have values between 0.940 and 0.942 nm for a-cell parameter, and values between 0.688 and 0.689 nm for c-cell parameter. After 28 days of immersion in Simulated Body Fluid (SBF), the materials show poor crystalline-fine films of biomimetic apatite covering their surfaces. These biomimetic apatite films have values between 0.946 and 0.969 nm for the a-cell parameter and values between 0.698 and 0.710 nm for the c-cell parameter. Hence, crystallinity, crystal size, and morphology of synthetic HAs are dependent on the stirring method used during the synthesis process, which affects the structural characteristics of the biomimetic apatite layers deposited on the synthetic HAs surfaces.

Quartz Crystal Microbalance Assay of Clinical Calcinosis Samples and Their Synthetic Models Differentiates the Efficacy of Chelation-Based Treatments.

This paper sets out in vitro protocols for studying the relative effectiveness of chelators used in the dissolution-based treatment of hard calcinosis. Pulverized hard calcinosis samples from human donors or synthetic hydroxyapatite nanoparticles were deposited by electrophoretic deposition on the surface of a quartz crystal microbalance sensor. Over 150 deposits of <20 μg were dissolved over the course of 1 h by aliquots of buffered, aqueous solutions of two calcium chelators, EDTA and citrate, with the surface-limited dissolution kinetics monitored with <1 s time resolution. There was no statistically significant difference in dissolution rate between the four synthetic hydroxyapatite materials in EDTA, but the dissolution rates in citrate were lower for hydroxyapatite produced by acetate or nitrate metathesis. Hard calcinosis and synthetic hydroxyapatites showed statistically identical dissolution behavior, meaning that readily available synthetic mimics can replace the rarer samples of biological origin in the development of calcinosis treatments. EDTA dissolved the hydroxyapatite deposits more than twice as fast as citrate at pH 7.4 and 37 °C, based on a first-order kinetic analysis of the initial frequency response. EDTA chelated 6.5 times more calcium than an equivalent number of moles of citrate. Negative controls using nonchelating N,N,N',N'-tetraethylethylenediamine (TEEDA) showed no dissolution effect. Pharmaceutical dissolution testing of synthetic hydroxyapatite tablets over 6 h showed that EDTA dissolved the tablets four to nine times more quickly than citrate.

Моделювання впливу наномагнетиту на властивості біогенного гідроксиапатиту

The aim of this article is to investigate with the help of modeling non-stationary process of influence of ferromagnetic additives on the physicochemical properties of the material produced on the basis of biogenic hydroxyapatite doped nanomagnetite. The simulation conditions specified amount of dopant, based on the medical devices produced by biological material, and in the test samples did not exceed 2% by weight. The model takes into account the limitations that the investigated material have the form of a powder or pressed tablets were obtained with the heat treatment temperature to below the Curie point of iron oxide in various gas atmospheres. The simulation changes the microstructure of the sample for the study of material properties, as well as simulated physiological peculiarities of the environment.The comparative objective evaluation of the dynamics of the solubility of modern hydroxyapatite composite biomaterials in artificial blood plasma SBF has been presented. The studies were conducted on the 2­nd, 5­th and 7­th days. As the main criterion for the dissolution of plastic materials the loss of their mass has been adopted. It is proved signicantly higher solubility properties of calcium phosphate cement, mass loss rates are much higher than values of ceramic biological and synthetic hydroxyapatite materials.

Dissolution Kinetics of Iron‐, Manganese‐, and Copper‐Containing Synthetic Hydroxyapatites

Micronutrient-substituted synthetic hydroxyapatite (SHA) is being evaluated by the National Aeronautics and Space Administration's (NASA) Advanced Life Support (ALS) Program for crop production on long-duration human missions to the International Space Station or for future Lunar or Martian outposts. The stirred-flow technique was utilized to characterize Ca, P, Fe, Mn, and Cu release characteristics from Fe-, Mn-, and Cu-containing SHA in deionized (DI) water, citric acid, and diethylene-triamine-pentaacetic acid (DTPA). Initially, Ca and P release rates decreased rapidly with time and were controlled by a non-SHA calcium phosphate phase(s) with low Ca/P solution molar ratios (0.91-1.51) relative to solid SHA ratios (1.56-1.64). At later times, Ca/P solution molar ratios (1.47-1.79) were near solid SHA ratios and release rates decreased slowly indicating that SHA controlled Ca and P release. Substituted SHA materials had faster dissolution rates relative to unsubstituted SHA. The initial metal release rate order was Mn >> Cu > Fe which followed metal-oxide/phosphate solubility suggesting that poorly crystalline metal-oxides/phosphates were dominating metal release. Similar metal release rates for all substituted SHA (approximately 0.01 cmol kg-1 min-1) at the end of the DTPA experiment indicated that SHA dissolution was supplying the metals into solution and that poorly crystalline metal-oxide/phosphates were not controlling metal release. Results indicate that non-SHA Ca-phosphate phases and poorly crystalline metal-oxide/phosphates will contribute Ca, P, and metals. After these phases have dissolved, substituted SHA will be the source of Ca, P, and metals for plants.

Characterization of iron, manganese, and copper synthetic hydroxyapatites by electron paramagnetic resonance spectroscopy.

The incorporation of micronutrients (e.g., Fe, Mn, Cu) into synthetic hydroxyapatite (SHA) is proposed for slow release of these nutrients to crops in NASA's Advanced Life Support (ALS) program for long-duration space missions. Separate Fe3+ (Fe-SHA), Mn2+ (Mn-SHA), and Cu2+ (Cu-SHA) containing SHA materials were synthesized by a precipitation method. Electron paramagnetic resonance (EPR) spectroscopy was used to determine the location of Fe3+, Mn2+, and Cu2+ ions in the SHA structure and to identify other Fe(3+)-, Mn(2+)-, and Cu(2+)-containing phases that formed during precipitation. The EPR parameters for Fe3+ (g=4.20 and 8.93) and for Mn2+ (g=2.01, A=9.4 mT, D=39.0 mT and E=10.5 mT) indicated that Fe3+ and Mn2+ possessed rhombic ion crystal fields within the SHA structure. The Cu2+ EPR parameters (g(z)=2.488, A(z)=5.2 mT) indicated that Cu2+ was coordinated to more than six oxygens. The rhombic environments of Fe3+ and Mn2+ along with the unique Cu2+ environment suggested that these metals substituted for the 7 or 9 coordinate Ca2+ in SHA. The EPR analyses also detected poorly crystalline metal oxyhydroxides or metal-phosphates associated with SHA. The Fe-, Mn-, and Cu-SHA materials are potential slow release sources of Fe, Mn, and Cu for ALS and terrestrial cropping systems.

Solid State 31Phosphorus Nuclear Magnetic Resonance of Iron‐, Manganese‐, and Copper‐Containing Synthetic Hydroxyapatites

The incorporation of micronutrients into synthetic hydroxyapatite (SHA) is proposed for slow release of these nutrients to crops in the National Aeronautics and Space Administration's (NASA's) Advanced Life Support (ALS) program for Lunar or Martian outposts. Solid state 31P nuclear magnetic resonance (NMR) was utilized to examine the paramagnetic effects of Fe3+, Mn2+, and Cu2+ to determine if they were incorporated into the SHA structure. Separate Fe3+, Mn2+, and Cu2+ containing SHA materials along with a transition metal free SHA (pure-SHA) were synthesized using a precipitation method. The proximity (<1 nm) of the transition metals to the 31P nuclei of SHA were apparent when comparing the integrated 31P signal intensities of the pure-SHA (87 arbitrary units g-1) with the Fe-, Mn-, and Cu-SHA materials (37-71 arbitrary units g-1). The lower integrated 31P signal intensities of the Fe-, Mn-, and Cu-SHA materials relative to the pure-SHA suggested that Fe3+, Mn2+, and Cu2+ were incorporated in the SHA structure. Further support for Fe3+, Mn2+, and Cu2+ incorporation was demonstrated by the reduced spin-lattice relaxation constants of the Fe-, Mn-, and Cu-SHA materials (T'=0.075-0.434s) relative to pure-SHA (T1=58.4s). Inversion recovery spectra indicated that Fe3+, Mn2+, and Cu2+ were not homogeneously distributed about the 31P nuclei in the SHA structure. Extraction with diethylene-triamine-penta-acetic acid (DTPA) suggested that between 50 and 80% of the total starting metal concentrations were incorporated in the SHA structure. Iron-, Mn-, and Cu-containing SHA are potential slow release sources of Fe, Mn, and Cu in the ALS cropping system.

Solid State Phosphorus Nuclear Magnetic Resonance of Iron-, Manganese-, and Copper-Containing Synthetic Hydroxyapatites

The incorporation of micronutrients into synthetic hydroxyapatite (SHA) is proposed for slow release of these nutrients to crops in the National Aeronautics and Space Administration's (NASA's) Advanced Life Support (ALS) program for Lunar or Martian outposts. Solid state 31P nuclear magnetic resonance (NMR) was utilized to examine the paramagnetic effects of Fe3+, Mn2+, and Cu2+ to determine if they were incorporated into the SHA structure. Separate Fe3+, Mn2+, and Cu2+ containing SHA materials along with a transition metal free SHA (pure-SHA) were synthesized using a precipitation method. The proximity (<1 nm) of the transition metals to the 31P nuclei of SHA were apparent when comparing the integrated 31P signal intensities of the pure-SHA (87 arbitrary units g−1) with the Fe-, Mn-, and Cu-SHA materials (37–71 arbitrary units g−1). The lower integrated 31P signal intensities of the Fe-, Mn-, and Cu-SHA materials relative to the pure-SHA suggested that Fe3+, Mn2+, and Cu2+ were incorporated in the SHA structure. Further support for Fe3+, Mn2+, and Cu2+ incorporation was demonstrated by the reduced spin-lattice relaxation constants of the Fe-, Mn-, and Cu-SHA materials relative to pure-SHA Inversion recovery spectra indicated that Fe3+, Mn2+, and Cu2+ were not homogeneously distributed about the 31P nuclei in the SHA structure. Extraction with diethylene-triamine-penta-acetic acid (DTPA) suggested that between 50 and 80% of the total starting metal concentrations were incorporated in the SHA structure. Iron-, Mn-, and Cu-containing SHA are potential slow release sources of Fe, Mn, and Cu in the ALS cropping system.

The ultrastructure of anorganic bovine bone and selected synthetic hyroxyapatites used as bone graft substitute materials

The objective of this study was to investigate the morphology and organization of apatite crystallites in mature mammalian bone. Anorganic bovine bone was studied in this investigation to allow for the examination of the mineral crystallites after removal of the organic phase. Field-emission low-voltage scanning electron microscopy (FE-LVSEM) was employed to obtain images at nanometer resolution without the application of a conductive coating. Transmission electron microscopy (TEM) of the samples was also performed to confirm the identification of features observed in the SEM and to allow for comparison with earlier studies of bone mineral architecture. For comparison, in order to demonstrate how the interaction of collagen and apatite results in the architecture and crystal structure of bone mineral, two synthetic hydroxyapatite materials were also analyzed: OsteoGen and OsteoGraf/LD300. FE-LVSEM revealed distinctive features of bone mineral: a fibrillar organization of crystallites, a periodic spacing of crystallites along the fibrils consistent with the banding pattern of collagen, inter-fibrillar bridging crystallites, and a plate-like habit of the crystallites. These findings supported the hypothesis, derived from the earlier TEM data of others, that the mineralization of collagen comprising osteoid proceeds by the formation of apatite crystallites within the fibers at selected periodic sites along their length. Moreover, the very presence in this anorganic material of distinct fibers comprised of the crystallites is demonstration of inter-crystallite bonding. The crystallites of the synthetic hydroxyapatite materials did not display any of these ultrastructural features.