Synthesis Of Peptide Arrays Research Articles

Agonist/Antagonist Activity of Oxytocin Variants Obtained from Free Cyclic Peptide Libraries Generated via Amino Acid Substitution.

We established a method for synthesizing a free cyclic peptide library via peptide array synthesis to demonstrate the sequence activity of cyclic peptides. Variants of the cyclic nonapeptide oxytocin (OXT) were synthesized via residue substitution. Natural amino acids (AAs) were classified into eight groups based on their physical properties and the size of their side chains, and a representative AA from each group was selected for residue substitution. All OXT variants were systematically evaluated for agonist/antagonist activity. Consequently, no improvement in agonist activity was observed, although substitution of the P4 and P8 residues resulted in decreased activity due to AA substitution. A few OXT variants exhibited antagonistic activity. In particular, the variants with P2 Leu residue substitution (Y2L) and Phe substitutions at residues 4 (Q4F), 5 (N5F), and 7 (P7F) showed high antagonistic activity. Variant Y2W was found to have the highest inhibitory effect, with a dissociation constant of 44 nM, which was comparable to that of the commercial antagonist atosiban (21 nM). Therefore, a free cyclic peptide library constructed via substitution with a natural AA residue was confirmed to be a powerful tool for bioactive peptide screening.

High-Throughput Peptide Derivatization toward Supramolecular Diversification in Microtiter Plates.

The evolution of life on earth eventually leads to the emergence of species with increased complexity and diversity. Similarly, evolutionary chemical space exploration in the laboratory is a key step to pursue the structural and functional diversity of supramolecular systems. Here, we present a powerful tool that enables rapid peptide diversification and employ it to expand the chemical space for supramolecular functions. Central to this strategy is the exploitation of palladium-catalyzed Suzuki–Miyaura cross-coupling reactions to direct combinatorial synthesis of peptide arrays in microtiter plates under an open atmosphere. Taking advantage of this in situ library design, our results unambiguously deliver a fertile platform for creating a set of intriguing peptide functions including green fluorescent protein-like peptide emitters with chemically encoded emission colors, hierarchical self-assembly into nano-objects, and macroscopic hydrogels. This work also offers opportunities for quickly surveying the diversified peptide arrays and thereby identifying the structural factors that modulate peptide properties.

New methodology for automated SPOT synthesis of peptides on cellulose using 1,3,5-triazine derivatives as linkers and as coupling reagents.

Two new rigid bi-aromatic linkers for synthesis of peptide arrays by SPOT methodology were obtained from cellulose treated with 2,4-dichloro-6-methoxy-1,3,5-triazine. Reaction with m-phenylenediamine gave non-cleavable TYPE I linker which enabled attachment of the peptides via resistant to harsh reaction conditions amide, ether, and amine bonds. Reaction with 3-Fmoc-aminobenzoic acid followed by thermal isomerization of the intermediate "superactive" ester producing an amide-like bond gave TYPE II linker that was very stable during peptide synthesis. However, the peptide was cleavable, with fragment of the linker, in the presence of 1M LiOH solution. The uniform loading of the cellulose and efficient synthesis of the peptide array was achieved by using N-(4,6-dimethoxy-1,3,5-triazin-1-yl)-N-methylmorpholinium 4-toluenesulfonate as the coupling reagent.

Combinatorial Particle Patterning

AbstractThe unique properties of solid particles make them a promising element of micro‐ and nanostructure technologies. Solid particles can be used as building blocks for micro and nanostructures, carriers of monomers, or catalysts. The possibility of patterning different kinds of particles on the same substrate opens the pathway for novel combinatorial designs and novel technologies. One of the examples of such technologies is the synthesis of peptide arrays with amino acid particles. This review examines the known methods of combinatorial particle patterning via static electrical and magnetic fields, laser radiation, patterning by synthesis, and particle patterning via chemically modified or microstructured surfaces.

Development of a poly(dimethylacrylamide) based matrix material for solid phase high density peptide array synthesis employing a laser based material transfer

Poly(dimethylacrylamide) (PDMA) based matrix materials were developed for laser-based in situ solid phase peptide synthesis to produce high density arrays. In this specific array synthesis approach, amino acid derivatives are embedded into a matrix material, serving as a “solid” solvent material at room temperature. Then, a laser pulse transfers this mixture to the target position on a synthesis slide, where the peptide array is synthesized. Upon heating above the glass transition temperature of the matrix material, it softens, allowing diffusion of the amino acid derivatives to the synthesis surface and serving as a solvent for peptide bond formation. Here, we synthesized PDMA six-arm star polymers, offering the desired matrix material properties, using atom transfer radical polymerization. With the synthesized polymers as matrix material, we structured and synthesized arrays with combinatorial laser transfer. With densities of up to 20,000 peptide spots per cm2, the resolution could be increased compared to the commercially available standard matrix material. Time-of-Flight Secondary Ion Mass Spectrometry experiments revealed the penetration behavior of an amino acid derivative into the prepared acceptor synthesis surface and the effectiveness of the washing protocols.

ChemInform Abstract: Printing Peptide Arrays with a Complementary Metal Oxide Semiconductor Chip

AbstractReview: 41 refs.

Particle-Based Microarrays of Oligonucleotides and Oligopeptides.

In this review, we describe different methods of microarray fabrication based on the use of micro-particles/-beads and point out future tendencies in the development of particle-based arrays. First, we consider oligonucleotide bead arrays, where each bead is a carrier of one specific sequence of oligonucleotides. This bead-based array approach, appearing in the late 1990s, enabled high-throughput oligonucleotide analysis and had a large impact on genome research. Furthermore, we consider particle-based peptide array fabrication using combinatorial chemistry. In this approach, particles can directly participate in both the synthesis and the transfer of synthesized combinatorial molecules to a substrate. Subsequently, we describe in more detail the synthesis of peptide arrays with amino acid polymer particles, which imbed the amino acids inside their polymer matrix. By heating these particles, the polymer matrix is transformed into a highly viscous gel, and thereby, imbedded monomers are allowed to participate in the coupling reaction. Finally, we focus on combinatorial laser fusing of particles for the synthesis of high-density peptide arrays. This method combines the advantages of particles and combinatorial lithographic approaches.

Biomolecule Arrays Using Functional Combinatorial Particle Patterning on Microchips

AbstractBiofunctionalization of surfaces in a microarray format has revolutionized biological assay applications. Here, a microarray system based on a microelectronic chip is presented that allows for a versatile combinatorial in situ molecule synthesis with very high density. Successfully demonstrating an application for peptide array synthesis, the method offers a compact approach, high combinatorial freedom, and, due to the intrinsic alignment, high and reproducible precision. Patterning the chip surface with different microparticle types which imbed different monomers, several thousand different molecule types can be simultaneously elongated layer‐by‐layer by coupling the particle imbedded monomers to the molecules growing on the chip surface. This technique has the potential for a wide application in combinatorial chemistry, as long as the desired monomeric building blocks are compatible with the chemical process.

Automated Maskless Photolithography System for Peptide Microarray Synthesis on a Chip

Maskless photolithographic peptide synthesis was performed on a glass chip using an automated peptide array synthesizer system. The peptide array synthesizer was built in a closed box, which contained optical and fluidic systems. The conditions for peptide synthesis were fully controlled by a computer program. For the peptide synthesis on a glass chip, 20 NVOC-protected amino acids were synthesized. The coupling efficiencies of two model peptide sequences were examined on ACA/APTS and PEG/CHI/GPTS chips. PEG/CHI/GPTS chip gave higher average stepwise yields of GIYWHHY (94%) and YIYGSFK (98%) than those of ACA/APTS chip. To quantify peptide-protein binding affinity, HPQ- or HPM-containing pentapeptides were synthesized on a PEG/CHI/GPTS chip and the binding event of Cy3 labeled-streptavidin was quantified. The peptide sequence of IQHPQ showed highest binding affinity with Cy3 labeled-streptavidin. The results demonstrated that the photolithographic peptide array synthesis method efficiently quantified the binding activities of protein-peptide interactions and it can be used for additional biological assay applications.

ChemInform Abstract: Particle‐Based Synthesis of Peptide Arrays

AbstractChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.

Combinatorial peptide synthesis on a microchip.

Microchips are used in the combinatorial synthesis of peptide arrays by means of amino acid microparticle deposition. The surface of custom-built microchips can be equipped with an amino-modified poly(ethylene glycol)methacrylate (PEGMA) graft polymer coating, which permits high loading of functional groups and resists nonspecific protein adsorption. Specific microparticles that are addressed to the polymer-coated microchip surface in a well defined pattern release preactivated amino acids upon melting, and thus allow combinatorial synthesis of high-complexity peptide arrays directly on the chip surface. Currently, arrays with densities of up to 40,000 peptide spots/cm(2) can be generated in this way, with a minimum of coupling cycles required for full combinatorial synthesis. Without using any additional blocking agent, specific peptide recognition has been verified by background-free immunostaining on the chip-based array. This unit describes microchip surface modification, combinatorial peptide array synthesis on the chip, and a typical immunoassay employing the resulting high-density peptide arrays.

Numb regulates cell–cell adhesion and polarity in response to tyrosine kinase signalling

Epithelial-mesenchymal transition (EMT), which can be caused by aberrant tyrosine kinase signalling, marks epithelial tumour progression and metastasis, yet the underlying molecular mechanism is not fully understood. Here, we report that Numb interacts with E-cadherin (E-cad) through its phosphotyrosine-binding domain (PTB) and thereby regulates the localization of E-cad to the lateral domain of epithelial cell–cell junction. Moreover, Numb engages the polarity complex Par3–aPKC–Par6 by binding to Par3 in polarized Madin-Darby canine kidney cells. Intriguingly, after Src activation or hepatocyte growth factor (HGF) treatment, Numb decouples from E-cad and Par3 and associates preferably with aPKC–Par6. Binding of Numb to aPKC is necessary for sequestering the latter in the cytosol during HGF-induced EMT. Knockdown of Numb by small hairpin RNA caused a basolateral-to-apicolateral translocation of E-cad and β-catenin accompanied by elevated actin polymerization, accumulation of Par3 and aPKC in the nucleus, an enhanced sensitivity to HGF-induced cell scattering, a decrease in cell–cell adhesion, and an increase in cell migration. Our work identifies Numb as an important regulator of epithelial polarity and cell–cell adhesion and a sensor of HGF signalling or Src activity during EMT.

Particle‐Based Synthesis of Peptide Arrays

Lithographic methods allow for the combinatorial synthesis of >50,000 oligonucleotides per cm(2), and this has revolutionized the field of genomics. High-density peptide arrays promise to advance the field of proteomics in a similar way, but currently lag behind. This is mainly due to the monomer-by-monomer repeated consecutive coupling of 20 different amino acids associated with lithography, which adds up to an excessive number of coupling cycles. Combinatorial synthesis based on electrically charged solid amino acid particles resolves this problem. A color laser printer or a chip addresses the different charged particles consecutively to a solid support, where, when completed, the whole layer of solid amino acid particles is melted at once. This frees hitherto immobilized amino acids to couple all 20 different amino acids to the support in one single coupling reaction. The method should allow for the translation of entire genomes into sets of overlapping peptides to be used in proteome research.

SPOT Synthesis of Peptide Arrays on Self‐Assembled Monolayers and their Evaluation as Enzyme Substrates

amino acid to the other, and therefore the amount and purity of peptides can also vary. Monitoring reactions on the support relies on the use of a coloured dye, and quality control of the peptide requires its cleavage from the support after completion of synthesis for subsequent solution-phase analysis by HPLC or MALDI-ToFMS. [19] Consequently, assay results obtained from an array prepared by SPOT synthesis sometimes need to be confirmed by using purified samples of peptides in a solution-phase assay. [15] By combining the robustness and versatility of SAM-coated gold platforms and the easy-to-handle SPOT peptide synthesis methodology, an efficient method for preparing peptide arrays on gold surfaces is described herein. The method allows onchip monitoring of the synthesis and subsequent evaluation of enzymatic modifications by MALDI-ToFmass spectrometry (Figure 1).

Combinatorial Synthesis of Peptide Arrays with a Laser Printer

Special delivery: The “freezing” of activated amino acid derivatives within solid particles enables a laser printer to deliver these “postal packages” to defined locations on a solid support with high resolution. Subsequent parallel coupling is initiated simply by melting a whole layer of 20 different amino acid particles (see schematic representation; Fmoc=9-fluorenylmethoxycarbonyl).

Construction and Evaluation of an Automated Light Directed Protein-Detecting Microarray Synthesizer

We have designed, constructed, and evaluated an automated instrument that has produced high-density arrays with more than 30 000 peptide features within a 1.5 cm(2) area of a glass slide surface. These arrays can be used for high throughput library screening for protein binding ligands, for potential drug candidate molecules, or for discovering biomarkers. The device consists of a novel fluidics system, a relay control electrical system, an optics system that implements Texas Instruments' digital micromirror device (DMD), and a microwave source for accelerated synthesis of peptide arrays. The instrument implements two novel solid phase chemical synthesis strategies for producing peptide and peptoid arrays. Biotin-streptavidin and DNP anti-DNP (dinitrophenol) models of antibody small molecule interactions were used to demonstrate and evaluate the instrument's capability to produce high-density protein detecting arrays. Several screening assay and detection schemes were explored with various levels of efficiency and assays with sensitivity of 10 nM were also possible.

The Role of CKIP-1 in Cell Morphology Depends on Its Interaction with Actin-capping Protein

CKIP-1 is a pleckstrin homology domain-containing protein that induces alterations of the actin cytoskeleton and cell morphology when expressed in human osteosarcoma cells. CKIP-1 interacts with the heterodimeric actin-capping protein in cells, so we postulated that this interaction was responsible for the observed cytoskeletal and morphological effects of CKIP-1. To test this postulate, we used peptide "walking arrays" and alignments of CKIP-1 with CARMIL, another CP-binding protein, to identify Arg-155 and Arg-157 of CKIP-1 as residues potentially required for its interactions with CP. CKIP-1 mutants harboring Arg-155 and Arg-157 substitutions exhibited greatly decreased CP binding, while retaining wild-type localization, the ability to interact with protein kinase CK2, and self-association. To examine the phenotype associated with expression of these mutants, we generated tetracycline-inducible human osteosarcoma cells lines expressing R155E,R157E mutants of CKIP-1. Examination of these cell lines reveals that CKIP-1 R155E,R157E did not induce the distinct changes in cell morphology and the actin cytoskeleton that are characteristic of wild-type CKIP-1 demonstrating that the interaction between CKIP-1 and CP is required for these cellular effects.

Chemoselective Alkylation ofN-Alkylaminooxy-Containing Peptides

Peptides containing N-alkylaminooxy amino acids were chemoselectively alkylated with allylic, benzylic, and alpha-carbonyl bromides, N-ethylmaleimide, and hexyl acrylate in mildly acidic aqueous/organic solutions. Alkylation at the aminooxy nitrogen proceeds in good yields with excellent to complete chemoselectivity in the presence of all common amino acids except cysteine. This reaction complements the selective glycosylation and acylation of N-alkylaminooxy groups and provides an avenue for the synthesis of peptide arrays comprising a wide variety of neoglycopeptides and neolipopeptides.

New planar substrates for the in situ synthesis of peptide arrays.

The performance of new cellulose membranes, aminofunctionalized via a PEG spacer, as a solid support in the synthesis of peptide arrays is described. The new membranes are stable to trifluoroacetic acid (TFA) and strong aqueous base for days. These properties extend the scope of synthesis considerably, e.g., more efficient side chain cleavage protocols can be applied which yielded peptides of improved purity. For the first time, cellulose membranes with a loading as high as 5 micromol/cm2 were accessible. Additionally, newly developed polypropylene membranes with hydroxy- or amino functionalities were successfully employed for the SPOT synthesis of peptides and phosphopeptides. The membranes are compatible with antibody binding as well as enzymatic phosphorylation assays.

Profiling the immune responses of human patients treated with recombinant streptokinase after myocardial infarct.

The SPOT synthesis of peptide arrays on continuous cellulose membranes should be generally applicable in the analysis of sequential antibody binding sites using the enzyme-substrate or other standard detection protocols. The use of total serum is limited by the occurrence of high background levels. This may be overcome if affinity purified antibodies or sera with high antibody titers are used, which allows work at high dilutions and a consequent reduction of background level. Here we demonstrate the mapping of antigenic regions located on recombinant streptokinase SK-2 (Heberkinase) using cellulose-bound peptide scans and human total sera from patients treated with SK-2 (Heberkinase). Streptokinase (SK) is a 47 kDa protein produced by various strains of hemolytic streptococci and is a potent activator of the fibrinolytic enzyme system in humans. SK is in widespread clinical use to treat acute infarction because of its function as an activator of vascular fibrinolysis. Since streptococcal infections are common, normal individuals are immunized with SK and antibodies (Abs) to SK can be detected in most of them. This therapy generates significant T-cell responses to SK and the neutralizing capacity of the Abs rises significantly. Neutralizing Abs reduces the efficiency of thrombolytic therapy and may cause allergic reactions. The widespread use of SK in humans makes its antigenicity an important clinical problem. In this regard the study of the immunodominant regions of SK becomes an important aspect for the improvement of this thrombolytic agent.