Synthesis Of Colloidal Metal Nanocrystals Research Articles

Surface-Enhanced Raman Spectroscopy of Benzylpenicillin Using Silver Nanocrystals Modified with Moroccan Plant Extracts

Green chemical routes for the synthesis of colloidal metal nanocrystals have been of great interest, namely in the context of nanosciences associated with biological applications. Among these methods, the synthesis of metal colloids using medicinal plant extracts originates nanocrystals having surfaces modified with chemical compounds of biological origin, which can be further explored in association with conventional pharmaceutics. In this context, the development of spectroscopic methods that seeks for understanding the potential benefits of using formulations that contain natural compounds and metal nanoparticles with therapeutic properties is of relevance. This research describes the chemical synthesis of silver colloids via the reduction of Ag(I) in the presence of distinct aqueous plant extracts. The selected extracts were obtained from Moroccan plants that have been used in traditional therapeutic practices over the centuries. The method led to stable colloids comprising polydispersed Ag nanocrystals that show surface-enhanced Raman scattering (SERS) activity. As an illustrative scenario, these colloids have been applied to the SERS detection of the natural β-lactam antibiotic benzylpenicillin, also known as penicillin G (PG). Our results indicate that all the Ag colloids tested with the different plant extracts are SERS-active for PG without showing detrimental interference from chemical adsorbates originated from the extracts. Therefore, this spectroscopic method can be further explored for monitoring nanoformulations of pharmaceuticals and metal colloids obtained using biological synthesis.

Single-Crystal Electrochemistry Uncovers the Role of Citrate in the Anisotropic Growth of Ag Nanostructures

Shape-controlled synthesis of metal nanocrystals is usually achieved by the addition of capping agents and serves an important approach to endowing metal nanomaterials with desired properties.1 A widely accepted hypothesis in the role of capping agents is they suppress the atomic deposition on the facets they selectively adsorb to, which leads to anisotropic growth.2 However, the roles of capping agents are often qualitatively deduced from the shape of metal nanocrystals formed, making it difficult to rationally design a synthetic condition for a certain shape or aspect ratio. Single-crystal electrochemical measurements have been used to uncover the facet-selective roles of a wide range of capping agents, such as chloride in the synthesis of Cu nanowires, bromide in the synthesis of Au nanorods, and iodide in the synthesis of Cu microplates.3-6 However, the anisotropic growth revealed by the growth of these nanocrystals is 10 times higher than that predicted by the single-crystal electrochemical measurements, indicating planar defects, such as twin planes and stacking faults, can also cause anisotropic growth.To elucidate the effects surface capping and defects in the anisotropic growth of metal nanocrystals, the work presented here combines synthetic methods and electrochemical measurements to reveal the roles of citrate in the growth of seeds with different structures.7 The single-crystal Ag seeds (Figure 1A) grow into cuboctahedra in the absence of citrate (Figure 1B) and octahedra in the presence of citrate (Figure 1C), which closely matches the shape prediction from the electrochemical measurements. Linear sweep voltammetry (LSV) measurements under the synthetic conditions demonstrate the anisotropic growth with citrate is a result of citrate selectively suppressing the oxidation of a reducing agent, ascorbic acid, and citrate does not affect silver ion reduction. The Ag nanoplate seeds with planar defects (Figure 1D) undergo isotropic growth in the absence of citrate (Figure 1E), but exhibit 30~100 times more anisotropic growth in the presence of citrate than the single-crystal seeds and electrochemical prediction (Figure 1F). Further investigation suggests planar defects can catalyze silver atom deposition to the nanoplate side planes and citrate suppresses surface diffusion to the nanoplate basal planes.(1) Yang, T.-H.; Shi, Y.; Janssen, A.; Xia, Y., Surface Capping Agents and Their Roles in Shape-Controlled Synthesis of Colloidal Metal Nanocrystals. Angew. Chem., Int. Ed. 2020, 59, 15378-15401.(2) Xia, Y.; Xiong, Y.; Lim, B.; Skrabalak, S. E., Shape-Controlled Synthesis of Metal Nanocrystals: Simple Chemistry Meets Complex Physics? Angew. Chem., Int. Ed. 2009, 48, 60-103.(3) Kim, M. J.; Brown, M.; Wiley, B. J., Electrochemical investigations of metal nanostructure growth with single crystals. Nanoscale 2019, 11, 21709-21723.(4) Kim, M. J.; Alvarez, S.; Chen, Z.; Fichthorn, K. A.; Wiley, B. J., Single-Crystal Electrochemistry Reveals Why Metal Nanowires Grow. J. Am. Chem. Soc. 2018, 140, 14740-14746.(5) Brown, M.; Wiley, B. J., Bromide Causes Facet-Selective Atomic Addition in Gold Nanorod Syntheses. Chem. Mater. 2020, 32, 6410-6415.(6) Kim, M. J.; Cruz, M. A.; Chen, Z.; Xu, H.; Brown, M.; Fichthorn, K. A.; Wiley, B. J., Isotropic Iodide Adsorption Causes Anisotropic Growth of Copper Microplates. Chem. Mater. 2021, 33, 881-891.(7) Xu, H.; Wiley, B. J., The Roles of Citrate and Defects in the Anisotropic Growth of Ag Nanostructures. Chem. Mater. 2021, 33, 8301-8311. Figure 1

Surface Capping Agents and Their Roles in Shape-Controlled Synthesis of Colloidal Metal Nanocrystals.

Surface capping agents have been extensively used to control the evolution of seeds into nanocrystals with diverse but well-controlled shapes. Here we offer a comprehensive review of these agents, with a focus on the mechanistic understanding of their roles in guiding the shape evolution of metal nanocrystals. We begin with a brief introduction to the early history of capping agents in electroplating and bulk crystal growth, followed by discussion of how they affect the thermodynamics and kinetics involved in a synthesis of metal nanocrystals. We then present representative examples to highlight the various capping agents, including their binding selectivity, molecular-level interaction with a metal surface, and impacts on the growth of metal nanocrystals. We also showcase progress in leveraging capping agents to generate nanocrystals with complex structures and/or enhance their catalytic properties. Finally, we discuss various strategies for the exchange or removal of capping agents, together with perspectives on future directions.

Synthesis of Colloidal Metal Nanocrystals: A Comprehensive Review on the Reductants.

There is a growing interest in controlling the synthesis of colloidal metal nanocrystals and thus tailoring their properties toward various applications. In this context, choosing an appropriate combination of reagents (e.g., salt precursor, reductant, capping agent, and stabilizer) plays a pivotal role in enabling the synthesis of metal nanocrystals with diversified sizes, shapes, and structures. Here we present a comprehensive review that highlights one of the key reagents for the synthesis of metal nanocrystals via chemical reduction: the reductants. We start with a brief introduction to the compounds commonly employed as reductants in the colloidal synthesis of metal nanocrystals by showing their oxidation half-reactions and the corresponding oxidation potentials. Then we offer specific examples pertaining to the controlled synthesis of metal nanocrystals, followed by some fundamental aspects covering the general mechanisms of metal ion reduction based on the Marcus Theory. Afterwards, we present a case-by-case discussion on a wide variety of reductants, including their major properties, reduction mechanisms, and additional effects on the final products. We illustrate these aspects by selecting key examples from the literature and paying close attention to the underlying mechanism in each case. At the end, we conclude by summarizing the highlights of the review and providing some perspectives on future directions.

Shape-Controlled Synthesis of Colloidal Metal Nanocrystals by Replicating the Surface Atomic Structure on the Seed.

Controlling the surface structure of metal nanocrystals while maximizing the utilization efficiency of the atoms is a subject of great importance. An emerging strategy that has captured the attention of many research groups involves the conformal deposition of one metal as an ultrathin shell (typically 1-6 atomic layers) onto the surface of a seed made of another metal and covered by a set of well-defined facets. This approach forces the deposited metal to faithfully replicate the surface atomic structure of the seed while at the same time serving to minimize the usage of the deposited metal. Here, the recent progress in this area is discussed and analyzed by focusing on the synthetic and mechanistic requisites necessary for achieving surface atomic replication of precious metals. Other related methods are discussed, including the one-pot synthesis, electrochemical deposition, and skin-layer formation through thermal annealing. To close, some of the synergies that arise when the thickness of the deposited shell is decreased controllably down to a few atomic layers are highlighted, along with how the control of thickness can be used to uncover the optimal physicochemical properties necessary for boosting the performance toward a range of catalytic reactions.

Synthesis of Palladium Nanoscale Octahedra through a One-Pot, Dual-Reductant Route and Kinetic Analysis.

Shape-controlled synthesis of colloidal metal nanocrystals has traditionally relied on the use of an approach that involves the reduction of a metal precursor by a single reductant. Once the concentration of atoms surpasses supersaturation, they will undergo homogeneous nucleation to generate nuclei and then seeds, followed by further growth into nanocrystals. In general, it is a grand challenge to optimize such an approach because the kinetic requirement for nucleation tends to be drastically different from what is needed to guide the growth process. In this work, we overcome this difficulty by switching to a dual-reductant approach, in which both strong and weak reductants are added into the same reaction solution. By controlling their amounts to program the reduction kinetics, the strong reductant only regulates the homogeneous nucleation process to generate the desired seeds, and once consumed, the weak reductant takes over to control the growth pattern and thereby the shape of the resulting nanocrystals.

Autocatalytic surface reduction and its role in controlling seed-mediated growth of colloidal metal nanocrystals

The growth of colloidal metal nanocrystals typically involves an autocatalytic process, in which the salt precursor adsorbs onto the surface of a growing nanocrystal, followed by chemical reduction to atoms for their incorporation into the nanocrystal. Despite its universal role in the synthesis of colloidal nanocrystals, it is still poorly understood and controlled in terms of kinetics. Through the use of well-defined nanocrystals as seeds, including those with different types of facets, sizes, and internal twin structure, here we quantitatively analyze the kinetics of autocatalytic surface reduction in an effort to control the evolution of nanocrystals into predictable shapes. Our kinetic measurements demonstrate that the activation energy barrier to autocatalytic surface reduction is highly dependent on both the type of facet and the presence of twin boundary, corresponding to distinctive growth patterns and products. Interestingly, the autocatalytic process is effective not only in eliminating homogeneous nucleation but also in activating and sustaining the growth of octahedral nanocrystals. This work represents a major step forward toward achieving a quantitative understanding and control of the autocatalytic process involved in the synthesis of colloidal metal nanocrystals.

Facile Synthesis of Pd@Pt3–4L Core–Shell Octahedra with a Clean Surface and Thus Enhanced Activity toward Oxygen Reduction

AbstractThe presence of a capping agent or stabilizer in the synthesis of colloidal metal nanocrystals will compromise their performance if employed as electrocatalysts. Herein we demonstrate the synthesis of Pd@Pt3–4L core–shell octahedral nanocrystals with greatly enhanced activity toward the oxygen reduction reaction by eliminating the use of any capping agent or stabilizer. This was achieved by employing Pd octahedral seeds with well‐defined {1 1 1} facets and by dispersing them on a carbon black support prior to Pt deposition. Upon optimization of the reaction conditions, Pt ultrathin shells could be conformally deposited on the Pd octahedral seeds in a layer‐by‐layer fashion without involving self‐nucleation or island growth for the Pt atoms. The as‐obtained octahedral Pd@Pt3–4L/C catalyst exhibited a specific activity 50 % greater than that of a reference sample prepared in the presence of a polymer stabilizer such as poly(vinyl pyrrolidone). The polymer‐free catalyst also showed 5‐fold enhancement in specific activity if benchmarked against a commercial Pt/C catalyst.

Reduction rate as a quantitative knob for achieving deterministic synthesis of colloidal metal nanocrystals.

Despite the incredible developments made to the synthesis of colloidal metal nanocrystals, it is still challenging to produce them in a reproducible and predictable manner. This drawback can be attributed to the fact that the protocols continue to be built upon qualitative observations and empirical laws. Because of the vast number of intricately entangled experimental parameters in a synthesis, it is almost impossible to predict and control the outcome by knowingly alternating these parameters. In this Perspective article, we discuss the recent efforts in pushing nanocrystal synthesis towards a deterministic process based upon quantitative measurements. In particular, we focus on how the reduction rate of a salt precursor can be used as a quantitative knob for predicting and controlling the outcomes of both nucleation and growth. We begin with a brief introduction to the techniques that have been used to extract the kinetic information of a synthesis and then discuss how the reduction rate is correlated with the defect structure, shape/morphology, and elemental distribution of the resultant nanocrystals. We conclude by highlighting some of the recent advances related to in situ probing of nanocrystal synthesis, with an emphasis on the real-time, quantitative aspects with regard to both nucleation and growth.

Seed-Mediated Growth of Colloidal Metal Nanocrystals.

Seed-mediated growth is a powerful and versatile approach for the synthesis of colloidal metal nanocrystals. The vast allure of this approach mainly stems from the staggering degree of control one can achieve over the size, shape, composition, and structure of nanocrystals. These parameters not only control the properties of nanocrystals but also determine their relevance to, and performance in, various applications. The ingenuity and artistry inherent to seed-mediated growth offer extensive promise, enhancing a number of existing applications and opening the door to new developments. This Review demonstrates how the diversity of metal nanocrystals can be expanded with endless opportunities by using seeds with well-defined and controllable internal structures in conjunction with a proper combination of capping agent and reduction kinetics. New capabilities and future directions are also highlighted.

Shape-Controlled Synthesis of Colloidal Metal Nanocrystals: Thermodynamic versus Kinetic Products.

This Perspective provides a contemporary understanding of the shape evolution of colloidal metal nanocrystals under thermodynamically and kinetically controlled conditions. It has been extremely challenging to investigate this subject in the setting of one-pot synthesis because both the type and number of seeds involved would be changed whenever the experimental conditions are altered, making it essentially impossible to draw conclusions when comparing the outcomes of two syntheses conducted under different conditions. Because of the uncertainty about seeds, most of the mechanistic insights reported in literature for one-pot syntheses of metal nanocrystals with different shapes are either incomplete or ambiguous, and some of them might be misleading or even wrong. Recently, with the use of well-defined seeds for such syntheses, it became possible to separate growth from nucleation and therefore investigate the explicit role(s) played by a specific thermodynamic or kinetic parameter in directing the evolution of colloidal metal nanocrystals into a specific shape. Starting from single-crystal seeds enclosed by a mix of {100}, {111}, and {110} facets, for example, one can obtain colloidal nanocrystals with diversified shapes by adjusting various thermodynamic or kinetic parameters. The mechanistic insights learnt from these studies can also be extended to account for the products of conventional one-pot syntheses that involve self-nucleation only. The knowledge can be further applied to many other types of seeds with twin defects or stacking faults, making it an exciting time to design and synthesize colloidal metal nanocrystals with the shapes sought for a variety of fundamental studies and technologically important applications.

Synthesis of colloidal metal nanocrystals in droplet reactors: the pros and cons of interfacial adsorption.

Droplet reactors have received considerable attention in recent years as an alternative route to the synthesis and potentially high-volume production of colloidal metal nanocrystals. Interfacial adsorption will immediately become an important issue to address when one seeks to translate a nanocrystal synthesis from batch reactors to droplet reactors due to the involvement of higher surface-to-volume ratios for the droplets and the fact that nanocrystals tend to be concentrated at the water-oil interface. Here we report a systematic study to compare the pros and cons of interfacial adsorption of metal nanocrystals during their synthesis in droplet reactors. On the one hand, interfacial adsorption can be used to generate nanocrystals with asymmetric shapes or structures, including one-sixth-truncated Ag octahedra and Au-Ag nanocups. On the other hand, interfacial adsorption has to be mitigated to obtain nanocrystals with uniform sizes and controlled shapes. We confirmed that Triton X-100, a nonionic surfactant, could effectively alleviate interfacial adsorption while imposing no impact on the capping agent typically needed for a shape-controlled synthesis. With the introduction of a proper surfactant, droplet reactors offer an attractive platform for the continuous production of colloidal metal nanocrystals.