High-resolution Synchrotron X-ray Diffraction Research Articles

Atomic disorder and intrinsic anomalous Hall effect in a half-metallic ferromagnet Co2VAl

Half-metallic ferromagnets, conducting for one spin channel while insulating for the other, are highly desirable for spintronic applications due to 100 % spin polarization around the Fermi level. Cobalt-based half-metallic Heusler compounds have attracted enormous attention due to their large spin polarization and a high magnetic transition temperature. In the present study, we report the experimental and theoretical investigation of crystal structure and anomalous Hall effect (AHE) in half-metallic ferromagnet Co2VAl. The structural investigation of high-resolution synchrotron x-ray diffraction data reveals 10 % antisite disorder between V and Al atoms within the L21 ordered crystal structure. The scaling analysis of anomalous Hall data shows that the AHE in our system is mainly driven by the Berry curvature in the momentum space. The magnitude of experimental intrinsic anomalous Hall conductivity (AHC) due to the momentum space Berry curvature is about 44.67 ± 0.02 S/cm at 5 K, which is less than the theoretically calculated AHC for the ordered structure. Our theoretical calculations suggest that the lower AHC obtained for the present system is due to the reduced Berry curvature in the disordered case with negligible impact on half-metallicity of the system.

Direct Determination of POSS Cage Structure in a Self-Assembled Ionic Bridged Silsesquioxane by Using the Total Pair Distribution Function G(r) and Density Functional Theory.

In the present study, both short-range and long-range structural features of an ionic bridged silsesquioxane, specifically one containing the 1,4-diazoniabicyclo[2.2.2]octane chloride group (ISSQ), were elucidated. This ionic silsesquioxane was synthesized via direct polycondensation of a bridged organosilane precursor, without any additional functionalization step. Si-O-Si cage structures typical of Polyhedral Oligomeric Silsesquioxanes (POSS) were identified. The average interatomic distances of the POSS cages, including the open T8 cage and the T12 cage for the ISSQ, as well as the T8 cage for a commercially available pendant POSS were determined. It is the first report of the interatomic distance determination of POSS cage; achieved by using total pair distribution function G(r) values obtained through high-resolution synchrotron X-ray diffraction combined with density functional theory (DFT) calculations. The application of DFT was crucial for accurately assigning X-ray peaks and verifying structural details. Furthermore, the analysis of X-ray diffraction peaks and the examination of crystalline domains via transmission electron microscopy enabled the proposal of a hexagonal arrangement of Si-O-Si cages over long ranges within the ionic bridged silsesquioxane. This proposed arrangement highlights a distinctive structural organization that could impact the material's properties and applications.

Enhancement of superconductivity and structural phase transitions under pressure in FeTe0.89S0.11

The ternary iron chalcogenide, FeTe0.89S0.11 is a prominent member of the family of Fe-based superconductors with an ambient pressure Tc of around 8 K and a simple structure formed by layers of edge-sharing distorted tetrahedra separated by a van der Waals gap. Upon compression to 6 GPa, the Tc increases monotonically to 11 K. The superconductivity disappeared at about 6 GPa which was correlated to a softening of a Raman mode. High-resolution synchrotron X-ray diffraction shows that the FeTe0.89S0.11 started to transform from the monoclinic phase described by space group Cm to a disordered triclinic phase described by space group P1 at around 10 GPa (theoretical) - 14 GPa (experimental). Due to the phase transition the studied material transforms from a layered compound to a polymer, which is accompanied by a volume collapse of 4.65 %, indicating a discontinuous first-order phase transition. The disappearance of Raman modes, along with pressure independent resistivity, and ab initio calculations results support the structural and electronics phase transition. According to our results Fe(Te,S) may be useful for future high-field power applications being formed of relatively inexpensive and nontoxic elements.

Effects of Fe substitution for Mn on structural, magnetic and magnetocaloric properties of TbMn2-xFexSi2

The structural and magnetic properties of TbMn2-xFexSi2 compounds (x = 0.0–0.4) have been investigated in details by high-resolution synchrotron x-ray and neutron powder diffraction, specific heat, and dc magnetization measurements. The replacement of Fe for Mn in TbMn2-xFexSi2 does not change the crystal structure but leads to a significant contraction of the unit cell (dV/dx ∼ - 6 Å3) and modification of three magnetic phase transition temperatures – the Curie temperatures Tc1, Tc2 and the Néel temperature TN. For example, the Tc1, Tc2 and TN values of TbMn2Si2 decrease from Tc1 = 50 K, Tc2 = 64 K and TN = 500 K to Tc1 = 27 K, Tc2 = 37 K and TN = 440 K for TbMn1.6Fe0.4Si2. Detailed neutron diffraction investigations have allowed us to determine the magnetic structures and construct the magnetic phase diagram as well as confirm the presence of magnetoelastic coupling effects. The significantly different responses of Tc1 and Tc2 to applied magnetic fields (e.g. dTc1/dB = 0.52 K/T and dTc2/dB = 4.7 K/T for TbMn1.6Fe0.4Si2), leads to expansion of the temperature region (ΔT = Tc2- Tc1) for the canted ferromagnetic state Fmc-ii between Tc1 and Tc2. In the case of TbMn1.6Fe0.4Si2, ΔT increases from ΔT = 9 K for applied magnetic field B = 0.2 T to ΔT = 36 K for B = 6 T, resulting in plateau-like behaviour of magnetic entropy change and enhances the relative cooling power (RCP) in this system. Under a change of magnetic field of 0 T – 5 T, the maximum value of the magnetic entropy changes -ΔSmax and adiabatic temperature change, ΔTad are derived to be -ΔSmax = 13.1 J/kg K and ΔTad = 8.4 K with the RCP = 411 J/kg for x=0.4 sample. The plateau-like magnetocaloric effect and relatively large RCP make these materials potentially suitable for application in cryogenic magnetic refrigeration.

Plasma-Sprayed Osseoconductive Hydroxylapatite Coatings for Endoprosthetic Hip Implants: Phase Composition, Microstructure, Properties, and Biomedical Functions

This contribution attempts to provide a state-of-the-art account of the physicochemical and biomedical properties of the plasma-sprayed hydroxylapatite (HAp) coatings that are routinely applied to the surfaces of metallic endoprosthetic and dental root implants designed to replace or restore the lost functions of diseased or damaged tissues of the human body. Even though the residence time of powder particles of HAp in the plasma jet is extremely short, the high temperature applied induces compositional and structural changes in the precursor HAp that severely affect its chemical and physical properties and in turn its biomedical performance. These changes are based on the incongruent melting behavior of HAp and can be traced, among many other analytical techniques, by high resolution synchrotron X-ray diffraction, vibrational (Raman) spectroscopy, and nuclear magnetic resonance (NMR) spectroscopy. In vivo reactions of the plasma-sprayed coatings to extracellular fluid (ECF) can be assessed and predicted by in vitro testing using simulated body fluids (SBFs) as proxy agents. Ways to safeguard the appropriate biological performance of HAp coatings in long-term service by controlling their phase content, porosity, surface roughness, residual stress distribution, and adhesion to the implant surface are being discussed.

Pressure/temperature-assisted crystallographic engineering–A strategy for developing the infrared phosphors

Light-emitting diodes utilizing the near-infrared (NIR), harnessed through the doping of Cr ion with structural engineering to tune the luminescent properties, provide a compelling avenue for cutting-edge high-tech industries. Overcoming the challenge of altering the local coordination surrounding the activators is crucial for advancing novel NIR phosphors. Here, we propose a pressure-assisted crystallographic engineering strategy to design the new Cr-doped phosphors. Implementing this approach at high temperature and pressure facilitates the phase transition from β-LiGaO2:Cr to α-LiGaO2:Cr, enabling the LiGaO2:Cr material to emit the NIR light, which was initially unattainable. Additionally, we demonstrate the in-situ monitoring of the reverse phase transition from α-LiGaO2:Cr to β-LiGaO2:Cr, validated by in-situ temperature-dependent high-resolution synchrotron X-ray diffraction. Furthermore, α-LiGaO2:Cr and β-LiGaO2:Cr exhibit unexpected optical properties characterized through synchrotron X-ray absorption, photoluminescence, temperature-dependent, and pressure-dependent analyses. Moreover, the α-LiGaO2:Cr shows strong mechanoluminescence and persistent luminescence. This research paves the way for developing novel NIR phosphors and sheds light on the analyses of pressure-assisted research.

Multiscale Length Structural Investigation and Thermoelectric Performance of Double-Filled Sr0.2Yb0.2Co4Sb12: An Exceptional Thermal Conductivity Reduction by Filler Segregation to the Grain Boundaries.

Among thermoelectric materials, skutterudites are the most prominent candidates in the mid-temperature range applications. In the multiple-filled Sr0.2Yb0.2Co4Sb12 skutterudite, with Sr and Yb as fillers, we have enhanced the thermoelectric performance of CoSb3 through the reduction of lattice thermal conductivity and the optimization of carrier concentration and electrical conductivity. The high-pressure synthesis of the double-filled derivative promotes filling fraction fluctuation. This is observed by high angular resolution synchrotron X-ray diffraction, showing a phase segregation that corresponds to an inhomogeneous distribution of the filler atoms, located at the 2a positions of the cubic space group Im3̅. In addition, scanning transmission electron microscopy (STEM) combined with EELS spectroscopy clearly shows a segregation of Sr atoms from the surface of the grains, which is compatible with the synchrotron X-ray powder diffraction results. Mean square displacement parameters analysis results in Einstein temperatures of ∼94 and ∼67 K for Sr and Yb, respectively, and a Debye temperature of ∼250 K. The strong effect on resonant and disorder scattering yields a significantly lower lattice thermal conductivity of 2.5 W m-1 K-1 at 773 K. Still, good weighed-mobility values were obtained, with high filling fraction of the Yb and Sr elements. This drives a reduced electrical resistivity of 2.1 × 10-5 Ω m, which leads to a peak zT of 0.26 at 773 K. The analysis and results performed for the synthesized (Sr,Yb)-double filled CoSb3, shed light on skutterudites for potential waste-heat recovery applications.

Resilience of the Aurivillius structure upon La and Cr doping in a Bi5Ti3FeO15 multiferroic.

Combining the experimental techniques of high-resolution X-ray diffraction, magnetometry, specific heat measurement, and X-ray photoelectron, Raman and dielectric spectroscopy techniques, we have studied the influence of La and Cr doping on the crystal structure and magnetism of the room temperature Aurivillius multiferroic Bi5Ti3FeO15 by investigating the physical properties of (Bi4La)Ti3FeO15 and Bi5Ti3 (Fe0.5Cr0.5)O15. The parent (Bi5Ti3FeO15) and the doped ((Bi4La)Ti3FeO15 and Bi5Ti3(Fe0.5Cr0.5)O15) compounds crystallize in the A21am space group, which is confirmed through our analysis of high-resolution synchrotron X-ray diffraction data obtained on phase-pure polycrystalline powders. We determined the oxidation states of the metal atoms in the studied compounds as Fe3+, Ti4+, Cr3+, and La3+ through the analysis of X-ray photoelectron spectroscopy data. The magnetic susceptibilities of the three compounds are marked by the absence of a long-range ordered ground state, but dominated by superparamagnetic clusters with dominant antiferromagnetic interactions. This signature of short-range magnetism is also seen in specific heat as a low temperature enhancement which is suppressed upon the application of external magnetic fields up to 8 T. Our dielectric spectroscopy experiments showed that the three studied compounds display similar features in the dielectric constant measured as a function of frequency. However, upon doping La at the Bi site, the width of the ferroelectric hysteresis loop increases for (Bi4La)Ti3FeO15 compared to that of the parent compound Bi5Ti3FeO15, and with Cr doping, Bi5Ti3(Fe0.5Cr0.5)O15 becomes a leaky dielectric. The resilience of the Aurivillius crystal structure towards doping of La at the Bi site and Cr at the Fe site is clearly seen in the bulk properties of magnetic susceptibility, specific heat and the average crystal structure. The relevance of changes in the local structure is evident from our Raman spectroscopy and X-ray pair distribution function studies.

Anisotropic thermo-mechanical response of layered hexagonal boron nitride and black phosphorus: application as a simultaneous pressure and temperature sensor.

Hexagonal boron nitride (hBN) and black phosphorus (bP) are crystalline materials that can be seen as ordered stackings of two-dimensional layers, which lead to outstanding anisotropic physical properties. Knowledge of the thermal equations of state of hBN and bP is of great interest in the field of 2D materials for a better understanding of their anisotropic thermo-mechanical properties and exfoliation mechanism towards the preparation of important single-layer materials like hexagonal boron nitride nanosheets and phosphorene. Despite several theoretical and experimental studies, important uncertainties remain in the determination of the thermoelastic parameters of hBN and bP. Here, we report accurate thermal expansion and compressibility measurements along the individual crystallographic axes, using in situ high-temperature and high-pressure high-resolution synchrotron X-ray diffraction. In particular, we have quantitatively determined the subtle variations of the in-plane and volumetric thermal expansion coefficients and compressibility parameters by subjecting these materials to hydrostatic conditions and by collecting a large number of data points in small pressure and temperature increments. In addition, based on the anisotropic behavior of bP, we propose the use of this material as a sensor for the simultaneous determination of pressure and temperature in the range of 0-5 GPa and 298-1700 K, respectively.

Semi-Quantitative Analyses of Ferromanganese Nodules from the Pacific Ocean Using Synchrotron X-ray Powder Diffraction

The geochemistry and mineralogy of Mn nodules offer crucial insights into the origins, environmental changes, and distribution of abyssal resources. However, the conventional laboratory X-ray diffractometer, usually employed for semi-quantitative analysis of mineral composition in Mn nodules, often fails to sufficiently detect minor phases due to beam flux limitations and high background signals. In this study, we investigated differences in manganate composition, even when comprising around 1% of the phase fraction, in two manganese nodules (KC-8 and KODOS-10) using high-resolution synchrotron X-ray diffraction. The Mn/Fe ratios of KC-8 and KODOS-10 were 1.32 and 6.24, respectively, indicating that KC-8 and KODOS-10 were predominantly formed in hydrogenetic and diagenetic environments. Both samples contained quartz, vernadite, buserite, and feldspar. Todorokite and illite were exclusively observed in KODOS-10. In KC-8, the phase fractions of vernadite and buserite among manganates ranged from 94(5)%–100(4)% and 6(1)%–0%, respectively. However, in KODOS-10, the fractions of vernadite, buserite, and todorokite ranged from 47(1)%–56(2)%, 33.6(4)%–40.1(3)%, and 10(3)%–16.3(8)%, respectively.

Anomalous excitonic phase diagram in band-gap-tuned Ta2Ni(Se,S)5

During a band-gap-tuned semimetal-to-semiconductor transition, Coulomb attraction between electrons and holes can cause spontaneously formed excitons near the zero-band-gap point, or the Lifshitz transition point. This has become an important route to realize bulk excitonic insulators – an insulating ground state distinct from single-particle band insulators. How this route manifests from weak to strong coupling is not clear. In this work, using angle-resolved photoemission spectroscopy (ARPES) and high-resolution synchrotron x-ray diffraction (XRD), we investigate the broken symmetry state across the semimetal-to-semiconductor transition in a leading bulk excitonic insulator candidate system Ta2Ni(Se,S)5. A broken symmetry phase is found to be continuously suppressed from the semimetal side to the semiconductor side, contradicting the anticipated maximal excitonic instability around the Lifshitz transition. Bolstered by first-principles and model calculations, we find strong interband electron-phonon coupling to play a crucial role in the enhanced symmetry breaking on the semimetal side of the phase diagram. Our results not only provide insight into the longstanding debate of the nature of intertwined orders in Ta2NiSe5, but also establish a basis for exploring band-gap-tuned structural and electronic instabilities in strongly coupled systems.

Impact of nano-scale cavities on hydrogen storage and retention in yttrium hydride

In situ synchrotron high-energy x-ray diffraction experiments and detailed transmission electron microscopy (TEM) characterization were conducted on as-fabricated and neutron-irradiated yttrium hydrides. The high-resolution synchrotron x-ray diffraction revealed minor α yttrium and major δ yttrium hydride phases in all specimens. Specimens were subject to heat treatments (heating-cooling cycles), and the intensity of α yttrium partially and completely disappeared in as-fabricated and neutron-irradiated specimens, respectively. The disappearance of α yttrium was unforeseen because hydrogen was expected to leave δ phase, causing an increase in α yttrium diffraction peak intensity. This observation indicated a surplus of hydrogen in the specimens where it was odd for hydride-forming early transition metal elements. The subsequent through-focus TEM characterization discovered nanometric cavities in both as-fabricated and neutron-irradiated yttrium hydride specimens for the first time. Two types of cavities were identified as fabrication-caused and irradiation-induced. The fabrication-caused cavities were associated with regions having linear deformation features, interfaces, and inclusions. The irradiation-induced cavities were observed as being formed isolated in the yttrium hydride phase. The presence of such nanometric cavities was considered as potential hydrogen storage pockets where the overall hydrogen storing capacity of yttrium hydride would be enhanced.

Hidden Hexavalent Chromium Ions with Subtle Structural Evolution in Near-Infrared Phosphors.

Cr-doped inorganic materials are pivotal in developing near-infrared optical materials; however, multivalent Cr ions and their respective distribution in the materials remain ambiguous. Herein, a series of Li(Sc1-xInx)O2:Cr phosphors containing both Cr3+/Cr6+ ions are prepared. High-resolution synchrotron X-ray diffraction (XRD) reveals two similar phases in Li(Sc1-xInx)O2. Raman spectra further confirm distinct scattering patterns for the two end-member compositions, corroborating the findings from the synchrotron XRD analysis. Cr K-edge X-ray absorption near-edge structure and extended X-ray absorption fine structure demonstrate that most Cr ions in the as-prepared samples are Cr6+, while Cr3+ becomes dominant after washing with water. Moreover, the source and distribution of Cr3+ and Cr6+ ions in the as-prepared and washed samples are revealed through X-ray fluorescence and X-ray excited optical luminescence techniques, which indicate that Cr6+ ions aggregate within the sample, while Cr3+ ions are evenly distributed. Photoluminescence, decay curves, and line shape analyses are implemented to resolve the electron-lattice interactions, and the corresponding mechanisms are provided to explain the asymmetry between photoluminescence and photoluminescence excitation spectra. Overall, this study provides valuable insights into the distribution of low-concentration multivalence ions in solid-state materials and offers a deeper understanding of the approaches to precisely resolve the subtle changes in the crystal structure.

Multiple unconventional charge density wave transitions in LaPt2Si2 superconductor clarified with high-energy X-ray diffraction

The quasi-2D platinum-based rare earth intermetallic LaPt2Si2 has attracted attention as it exhibits strong interplay between charge density wave order and superconductivity. However, most of the results reported on this material come from theoretical calculations, preliminary bulk investigations and powder samples, which makes it difficult to uniquely determine the temperature evolution of its crystal structure and, consequently, of its charge density wave transition. Therefore, the published literature around LaPt2Si2 is often controversial. Here, by means of high-resolution synchrotron X-ray diffraction data, we clarify some of the poorly or partially understood aspects of the physics of LaPt2Si2. In particular, we resolve the complex evolution of its crystal structure and superstructures, identifying the temperature dependence of multiple density wave transitions in good quality LaPt2Si2 single crystals. According to our findings, on cooling from room temperature LaPt2Si2 undergoes a series of subtle structural transitions which can be summarised as follows: second order commensurate tetragonal (P4/nmm)-to-incommensurate structure followed by a first order incommensurate-to-commensurate orthorhombic (Pmmn) transition and then a first order commensurate orthorhombic (Pmmn)-to-commensurate tetragonal (P4/nmm). The structural transitions are accompanied by both incommensurate and commensurate superstructural distortions of the lattice. The observed behavior is compatible with discommensuration of the CDW in this material.

Induced‐Fit‐Identification in a Rigid Metal‐Organic Framework for ppm‐Level CO2 Removal and Ultra‐Pure CO Enrichment

AbstractRemoving CO2 from crude syngas via physical adsorption is an effective method to yield eligible syngas. However, the bottleneck in trapping ppm‐level CO2 and improving CO purity at higher working temperatures are major challenges. Here we report a thermoresponsive metal–organic framework (1 a‐apz), assembled by rigid Mg2(dobdc) (1 a) and aminopyrazine (apz), which not only affords an ultra‐high CO2 capacity (145.0/197.6 cm3 g−1 (0.01/0.1 bar) at 298 K) but also produces ultra‐pure CO (purity ≥99.99 %) at a practical ambient temperature (TA). Several characterization results, including variable‐temperature tests, in situ high‐resolution synchrotron X‐ray diffraction (HR‐SXRD), and simulations, explicitly unravel that the excellent property is attributed to the induced‐fit‐identification in 1 a‐apz that comprises self‐adaption of apz, multiple binding sites, and complementary electrostatic potential (ESP). Breakthrough tests suggest that 1 a‐apz can remove CO2 from 1/99 CO2/CO mixtures at practical 348 K, yielding 70.5 L kg−1 of CO with ultra‐high purity of ≥99.99 %. The excellent separation performance is also revealed by separating crude syngas that contains quinary mixtures of H2/N2/CH4/CO/CO2 (46/18.3/2.4/32.3/1, v/v/v/v/v).

Induced-Fit-Identification in a Rigid Metal-Organic Framework for ppm-Level CO2 Removal and Ultra-Pure CO Enrichment.

Removing CO2 from crude syngas via physical adsorption is an effective method to yield eligible syngas. However, the bottleneck in trapping ppm-level CO2 and improving CO purity at higher working temperatures are major challenges. Here we report a thermoresponsive metal-organic framework (1a-apz), assembled by rigid Mg2(dobdc) (1a) and aminopyrazine (apz), which not only affords an ultra-high CO2 capacity (145.0/197.6 cm3 g-1 (0.01/0.1 bar) at 298 K) but also produces ultra-pure CO (purity ≥ 99.99%) at a practical ambient temperature (TA). Several characterization results, including variable-temperature tests, in-situ high-resolution synchrotron X-ray diffraction (HR-SXRD), and simulations, explicitly unravel that the excellent property is attributed to the induced-fit-identification in 1a-apz that comprises self-adaption of apz, multiple binding sites, and complementary electrostatic potential (ESP). Breakthrough tests suggest that 1a-apz can remove CO2 from 1/99 CO2/CO mixtures at practical 348 K, yielding 70.5 L kg-1 of CO with ultra-high purity of ≥ 99.99%. The excellent separation performance is also revealed by separating crude syngas that contains quinary mixtures of H2/N2/CH4/CO/CO2 (46/18.3/2.4/32.3/1, v/v/v/v/v).

Highly mismatched antiferroelectric films: Transition order and mechanical state

Epitaxial ${\mathrm{PbZrO}}_{3}/{\mathrm{SrRuO}}_{3}/{\mathrm{SrTiO}}_{3}$ heterostructures are among the most widely studied thin-film antiferroelectrics. This paper explores their temperature-induced phase transitions and the characteristics of the domain structure by means of high-resolution synchrotron x-ray diffraction. The antiferroelectric transition order appears to change from the first to the second; peculiar in-plane $M$-point superstructures develop at high temperatures, manifesting a new phase; the $R$- and $\mathrm{\ensuremath{\Sigma}}$-point superstructure reflections demonstrate much reduced splitting as compared to the demands of the mechanical compatibility. We discuss the energetics of the reduced around-the-normal antiferroelectric domain tilts, its relation to the observed changes in phase transitions, and point to the possible contribution to the observed effect from an unusual diffraction mechanism related to the partial coherence between domains in a random nanodomain structure.

Synthesis and physical properties of LaNiO2 crystals

Infinite-layer (IL) nickelates are an emerging family of superconductors whose similarities and differences to cuprate superconductors are under intense debate. To date, the IL phase of nickelates can only be reached via topotactic oxygen reduction of the perovskite phase, using H$_2$ gas or reducing agents such as CaH$_2$. While the topotactic reduction method has been widely employed on thin film and polycrystalline powder samples, the reduction of La$_{1-x}$Ca$_x$NiO$_3$ single-crystals with lateral dimensions up to 150 $\mu$m was achieved only recently, using an indirect contact method with CaH$_2$. Here we report the topotactic transformation of much larger LaNiO$_3$ crystals with lateral dimensions of more than one millimeter, via direct contact with CaH$_2$. We characterize the crystalline, magnetic, and electronic properties of the obtained IL LaNiO$_{2}$ crystals by powder and single-crystal x-ray diffraction (XRD), magnetometry, electrical transport, and x-ray photoelectron spectroscopy (XPS) measurements. The amount of incorporated topotactic hydrogen due to the reduction process is determined by a gas extraction method. In addition, we investigate the evolution of the lattice parameters under hydrostatic pressure up to 12 GPa, using high-resolution synchrotron XRD. Furthermore, we provide a direct comparison of several physical properties of the LaNiO$_{2}$ crystals to their powder and thin film counterparts.

Structure, electrical and thermal properties of single-crystal BaCuGdTe3.

Single crystals of the quaternary chalcogenide BaCuGdTe3 were obtained by direct reaction of elements allowing for a complete investigation of the intrinsic electrical and thermal properties of this previously uninvestigated material. The structure was investigated by high-resolution single-crystal synchrotron X-ray diffraction, revealing an orthorhombic crystal structure with the space group Cmcm. Although recently identified as a semiconductor suitable for thermoelectric applications from theoretical analyses, our electrical resistivity and Seebeck coefficient measurements show metallic conduction, the latter revealing strong phonon-drag. Temperature dependent hole mobility reveals dominant acoustic phonon scattering. Heat capacity data reveal a Debye temperature of 183 K and a very high density of states at the Fermi level, the latter confirming the metallic nature of this composition. Thermal conductivity is relatively high with Umklapp processes dominating thermal transport above the Debye temperature. The findings in this work lay the foundation for a more detailed understanding of the physical properties of this and similar multinary chalcogenide materials, and is part of the continuing effort in investigating quaternary chalcogenide materials and their suitability for use in technological applications.

Thermal Expansion and Rattling Behavior of Gd-Filled Co4Sb12 Skutterudite Determined by High-Resolution Synchrotron X-ray Diffraction.

In this work, Gd-filled skutterudite GdxCo4Sb12 was prepared using one step method under high pressure in a piston-cylinder-based press at 3.5 GPa and moderate temperature of 800 °C. A detailed structural characterization was performed using synchrotron X-ray diffraction (SXRD), revealing a filling fraction of x = 0.033(2) and an average <Gd-Sb> bond length of 3.3499(3) Å. The lattice thermal expansion accessed via temperature-dependent SXRD led to a precise determination of a Debye temperature of 322(3) K, from the fitting of the unit-cell volume expansion using the second order Grüneisen approximation. This parameter, when evaluated through the mean square displacements of Co and Sb, displayed a value of 265(2) K, meaning that the application of the harmonic Debye theory underestimates the Debye temperature in skutterudites. Regarding the Gd atom, its intrinsic disorder value was ~5× and ~25× higher than those of the Co and Sb, respectively, denoting that Gd has a strong rattling behavior with an Einstein temperature of θE = 67(2) K. As a result, an ultra-low thermal conductivity of 0.89 W/m·K at 773 K was obtained, leading to a thermoelectric efficiency zT of 0.5 at 673 K.