Superior Antibacterial Properties Research Articles

Synthesis and characterization of 4-nitro benzaldehyde with ZnO-based nanoparticles for biomedical applications.

Globally, cancer is the leading cause of death and morbidity, and skin cancer is the most common cancer diagnosis. Skin problems can be treated with nanoparticles (NPs), particularly with zinc oxide (ZnO) NPs, which have antioxidant, antibacterial, anti-inflammatory, and anticancer properties. An antibacterial activity of zinc oxide nanoparticles prepared in the presence of 4-nitrobenzaldehyde (4NB) was also tested in the present study. In addition, the influence of synthesized NPs on cell apoptosis, cell viability, mitochondrial membrane potential (MMP), endogenous reactive oxygen species (ROS) production, apoptosis, and cell adhesion was also examined. The synthesized 4-nitro benzaldehyde with ZnO (4NBZnO) NPs were confirmed via characterization techniques. 4NBZnO NPs showed superior antibacterial properties against the pathogens tested in antibacterial investigations. As a result of dose-based treatment with 4NBZnO NPs, cell viability, and MMP activity of melanoma cells (SK-MEL-3) cells were suppressed. A dose-dependent accumulation of ROS was observed in cells exposed to 4NBZnO NPs. As a result of exposure to 4NBZnO NPs in a dose-dependent manner, viable cells declined and apoptotic cells increased. This indicates that apoptotic cell death was higher. The cell adhesion test revealed that 4NBZnO NPs reduced cell adhesion and may promote apoptosis of cancer cells because of enhanced ROS levels.

CSMP: A Self-Assembled Plant Polysaccharide-Based Hydrofilm for Enhanced Wound Healing.

Wound management remains a critical healthcare issue due to the rising incidence of chronic diseases leading to persistent wounds. Traditional dressings have their limitations, such as potential for further damage during changing and suboptimal healing conditions. Recently, hydrogel-based dressings have gained attention due to their biocompatibility, biodegradability, and ability to fill wounds. Particularly, polysaccharide-based hydrogels have shown potential in various medical applications. This study focuses on the development of a novel hydrofilm wound dressing produced from a blend of chia seed mucilage (CSM) and polyvinyl alcohol (PVA), termed CSMP. While the individual properties of CSM and PVA are well-documented, their combined potential in wound management is largely unexplored. CSMP, coupled with sorbitol and glycerin, and cross-linked using ultraviolet light, results in a flexible, adhesive, and biocompatible hydrofilm demonstrating superior water absorption, moisturizing, and antibacterial properties. This hydrofilm promotes epithelial cell migration, enhanced collagen production, and outperforms existing commercial dressings in animal tests. The innovative CSMP hydrofilm offers a promising, cost-effective approach for improved wound care, bridging existing gaps in dressing performance and preparation simplicity. Future research can unlock further applications of such polysaccharide-based hydrofilm dressings.

Transparent Oil-Water Separating Hydrophobic Sponge Prepared from a Pickering High Internal Phase Emulsion Stabilized by Octadecyltrichlorosilane Grafting Carbon Nanotubes.

Increasingly, oil spills and industrial discharges are wreaking havoc on the water environment; in order to efficiently separate oil and water from sewage containing oil or organic solvents, a novel porous polymer (P(EHA-co-BA)) was prepared by Pickering high internal phase emulsion (HIPE) template method. To obtain polyHIPE with better oil/water separation capacities, octadecyltrichlorosilane (OTS)-modified carbon nanotubes (CNTs) and surfactants were used as costabilizers for HIPE, which improved the stability of HIPE as well as the mechanical properties and the separation efficiency of polyHIPE. In the presence of 1 wt % OTS-CNT adding in the oil phase, 1%OTS-CNT polyHIPE has high porosity (92.21%), favorable hydrophobicity (a water contact angle of 128°), and excellent mechanical properties. As a result, 1%OTS-CNT polyHIPE has high absorption of oils and oily solvents, e.g., dichloromethane up to 36 g/g, and maintains an absorption efficiency of >97% after 20 reapplications. In the formulation of polyHIPE, cinnamaldehyde (CA) has been added to provide superior antibacterial properties against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). It appears that the novel polyHIPE proposed in this work is a reusable antibacterial porous polymer with promising applications for oil-water separation.

Citric acid crosslinked soluble soybean polysaccharide films for active food packaging applications

In this work, a nontoxic crosslinking agent, citric acid (CA), was used to crosslink glycerol-plasticized SSPS films via a heat activated reaction. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy results confirmed the occurrence of esterification reaction between CA and SSPS. Microstructure of the CA-crosslinked SSPS films were characterized by scanning electron microscopy, atomic force microscopy and X-ray diffraction. The water resistance, mechanical, UV-barrier, water vapor barrier, antioxidant and thermal properties of SSPS films were enhanced by CA crosslinking. The SSPS film crosslinked with 5 % CA exhibited a maximum tensile strength of 6.5 MPa and a minimum water solubility of 34.3 %. The CA-crosslinked SSPS film also presented superior antibacterial properties against Gram-positive and Gram-negative bacteria. Application test results showed that the CA-crosslinked SSPS film can effectively delay the oxidative deterioration of lard during storage, suggesting that the developed CA-crosslinked SSPS film could be a promising candidate for active food packaging.

Superior antibacterial properties of copper-doped titanium oxide films prepared by micro-arc oxidation

To prevent bacterial contamination and enhance wear-resistance of titanium-based tools and implants, it is crucial to develop functional coatings with inherent antimicrobial property and high surface hardness. In this study, the micro-arc oxidation technique was employed to prepare ceramic oxide films with antibacterial properties on titanium metal surfaces by incorporating trace amounts of copper. It was found that the phytic acid (C6H18O24P6) used as the chelating agent in the Cu-containing electrolyte can not be recycled and the adding of alternative chelating agent calcium gluconate (C12H22O14Ca) can significantly promote the cyclic utilization. The oxide film prepared by using C12H22O14Ca as the chelating agent exhibits a typical volcanic micro-arc oxidation morphology with uniform copper distribution, high hardness and excellent substrate adhesion. Most importantly, in vitro antibacterial tests demonstrate the outstanding antibacterial performance of Cu-doped TiO2 film with an antibacterial rate of up to 99.9% against Escherichia coli and Staphylococcus aureus.

Sulfur dots corrosion inhibitors with superior antibacterial and fluorescent properties

In this study, sulfur dots (GA-SDs) synthesized by using Gum Arabic (GA) as a green stabilizer were used as corrosion inhibitors and their inhibition effect for Q235 steel in 3.5- wt% NaCl solution was investigated by weight loss, electrochemical tests, and surface and interface analysis. The results revealed that the inhibition efficiency reached the maximum value of 96.5% at 250 mg/L and the water-soluble GA-SDs were able to adhere to the iron surface through the diffusion and agglomeration effect. The unique antibacterial activities demonstrated a 99.35% inhibition efficiency at 250 mg/L. Moreover, the optical properties endowed the inhibitors with the fluorescence tracing function, which is an effective approach to detecting the residual quantity of water treatment agents. This work may facilitate the development of the next generation of multifunction water treatment agents in industrial circulating water systems.

A marine coating: Self-healing, stable release of Cu2+, anti-biofouling

We developed a marine coating consisting of Cu-MOF-74, multi-walled carbon nanotube containing carboxyl groups (MWCNT-COOH) and self-healing polymers, which simultaneously possesses self-healing and anti-biofouling properties. Cu-MOF-74 can stably release Cu2+ by virtue of the coordination dissociative mechanism. Studies have proved that MWCNT can inhibit the growth of bacteria, so adding the MWCNT can help to reduce the amount of the copper ions and ensure the antibacterial effect of the coating. In addition, the cross-linked network and abundant -COOH provided by the polymers and MWCNT-COOH further prevent the loss of copper ions. Moreover, the coating we prepared has good performance of self-healing at room temperature or slightly heated because the polymers possess abundant non-covalent hydrogen bonds. Finally, the coating not only has superior antibacterial property, but also effectively prevents the adhesion of macrofouling organism. Therefore, the coating has a longer service life and its environmental friendliness has also been improved.

Supramolecular and double network strategy toward strong and antibacterial protein films by introducing waterborne polyurethane and quaternized chitosan

Plant-derived protein composite film is one of the promising substitutes for non-renewable petroleum-based materials. However, its application is greatly limited due to the low mechanical strength and poor antibacterial activity. In this paper, a dual network strategy based on supramolecular chemistry was reported for fabricating a high-strength and antibacterial soybean protein (SP)-based biofilm by incorporating waterborne polyurethane (WP) and quaternized chitosan (QCS). Specifically, castor oil as a renewable plant resource was used for the preparation of functional WP polymer. Based on the synergistic effect of WP network and SP network, the performance of SP-based composite film was significantly enhanced. Compared with the original SP film, the tensile strength and toughness of SP/WP/QCS film were substantially increased by 159% and 531%, respectively. In addition, the composite film showed significantly enhanced water resistance and UV shielding capability. Due to the antibacterial effect of the quaternary ammonium salt component, the SP/WP/QCS composite film exhibited superior antibacterial properties. Therefore, this study provides a feasible strategy for the preparation of high-performance SP-based films, which is expected to be applied in packaging, multifunctional adhesive, and UV-shielding coating.

Cerium doped TiO2 coating with superior antibacterial property and biocompatibility prepared by micro-arc oxidation

Peri-implantitis is a highly prevalent disease caused by bacterial plaque that results in inflammation. The disease starts from the soft tissue and gradually spreads to the hard tissue around the implant. If left untreated, it can lead to decreased bone density and loss of the implant. Therefore, it is crucial to improve the antibacterial and biological activity of implants to achieve dual functions. In this study, we prepared a Ce-doped TiO2 coating on the surface of pure titanium by micro-arc oxidation (MAO) for the prevention of peri-implantitis. We systematically investigated the physicochemical properties, antibacterial activity, and biocompatibility of Ce-doped coatings in vitro and in vivo. The results demonstrated that the increase of Ce concentration in the coating could increase the proliferation, adhesion and osteogenic differentiation of BMSCs in vitro. Results from in vivo osteogenesis experiments demonstrated that the 2Ce-MAO coating exhibited superior efficacy in promoting implant repair in osteoporotic rats. Furthermore, the results of in vitro and in vivo antibacterial experiments indicated that the Ce-TiO2 coating exhibits excellent antibacterial and anti-inflammatory properties. These findings suggest that the Ce-TiO2 coating prepared via MAO may be a promising approach for preventing peri-implantitis and promoting osteogenesis in osteoporosis.

Evaluation of the osteoconductivity and the degradation of novel hydroxyapatite/polyurethane combined with mesoporous silica microspheres in a rabbit osteomyelitis model.

Bone defects caused by osteomyelitis can lead to severe disability. Surgeons still face significant challenges in treating bone defects. Nano-hydroxyapatite (n-HA) plays an important role in bone tissue engineering due to its excellent biocompatibility and osteoconductivity. Levofloxacin (Levo) was encapsulated in mesoporous silica nanoparticles (MSNs) via electrostatic attraction to serve as a drug delivery system. MSNs were incorporated with n-HA and polyurethane (PU). The degradation and osteoconductivity properties of these novel composite scaffolds and their effectiveness in treating chronic osteomyelitis in a rabbit model were assessed. Gross pathology, radiographic imaging, micro-computed tomography, Van Gieson staining, and hematoxylin and eosin staining were conducted at 6 and 12 weeks. The group of composite scaffolds combining n-HA/PU with MSNs containing 5 mg Levo (n-HA/PU + Nano +5 mg Levo) composite scaffolds showed superior antibacterial properties compared to the other groups. At 12 weeks, the n-HA/PU + Nano +5 mg Levo composite scaffolds group exhibited significantly greater volume of new trabecular bone formation compared to the other three groups. The surface of the novel composite scaffolds exhibited degradation after 6 weeks implantation. The internal structure of the scaffolds collapsed noticeably after 12 weeks of implantation. The rate of material degradation corresponded to the rate of new bone ingrowth. This novel composite scaffold, which is biodegradable and osteoconductive, has potential as a drug delivery system for treating chronic osteomyelitis accompanied by bone defects.

Arginine-Functionalized Thin Film Composite Forward Osmosis Membrane Integrating Antifouling and Antibacterial Effects.

Membrane fouling is an inevitable obstacle of polyamide composite forward osmosis (FO) membranes in oily wastewater treatment. In this study, zwitterionic arginine (Arg) is grafted onto nascent self-made FO polyamide poly(ether sulfone) (PA-PES) membrane, imparting superior hydrophilic, antifouling, and antibacterial properties to the membrane. Detailed characterizations revealed that the Arg-modified (Arg-PES) membrane presented obviously surface positively charged and unique morphology. Results showed that our strategy endowed the optimized membrane, the water flux increased by 113.2% compared to the pristine membrane, respectively, meanwhile keeping high NaCl rejection > 93.9% (with DI water as feed solution and 0.5 M NaCl as draw solution, FO mode). The dynamic fouling tests indicated that the Arg-PES membranes exhibited much improved antifouling performance towards oily wastewater treatment. The flux recovery ratios of the membrane were as high as 92.0% for cationic emulsified oil (cetyl pyridinium chloride, CPC), 87.0% for neutral emulsified oil (Tween-80), and 86.0% for anionic emulsified oil (sodium dodecyl sulfate, SDS) after washing, respectively. Meanwhile, the Arg-PES membranes assembled with guanidine cationic groups exhibited an enhanced antibacterial property against E. coli, which exhibited a high antibacterial efficiency of approximately 96%. Consequently, the newly arginine functionalized FO membrane possesses impressive antifouling performance, while simultaneously resisting bacterial invasion, thus rendering it an ideal alternative for oily wastewater treatment in the FO process.

Complexation-Induced Resolution Enhancement Pleiotropic Small Diameter Vascular Constructs with Superior Antibacterial and Angiogenesis Properties.

3D printing has been widely applied for preparing artificial blood vessels, which will bring innovation to cardiovascular disorder intervention. However, the printing resolution and anti-infection properties of small-diameter vessels (Φ < 6mm) have been challenging in 3D printing. The primary objective of this research is to design a novel coaxial 3D-printing postprocessing method for preparing small-size blood vessels with improved antibacterial and angiogenesis properties. The coaxial printing resolution can be more conveniently improved. Negatively charged polyvinyl alcohol (PVA) and alginate (Alg) interpenetrating networks artificial vessels are immersed in positively charged chitosan (CTS) solution. Rapid dimensional shrinkage takes place on its outer surface through electrostatic interactions. The maximum shrinkage size of wall thickness can reach 61.2%. The vessels demonstrate strong antibacterial properties against Escherichia coli (98.8 ± 0.5%) and Staphylococcus aureus (97.6 ± 1.4%). In rat dorsal skin grafting experiments, Cu2+ can promote angiogenesis by regulating hypoxia-inducible factor-1 pathway. No artificial blood vessel blockage occurs after 5 days of blood circulation in vitro.

Construction of silver-coated high translucent zirconia implanting abutment material and its property of antibacterial

High translucent zirconia (HTZ) has excellent mechanical properties, biocompatibility, and good semi-translucency making it an ideal material for aesthetic anterior dental implant abutments without antibacterial properties. In the oral environment, the surface of the abutment material is susceptible to microbial adhesion and biofilm formation, which can lead to infection or peri-implantitis and even implant failure. This study aims to promote the formation of a biological seal at the implant-soft tissue interface by modifying the HTZ surface, using the load-bearing capacity of the aluminosilicate porous structure and the broad-spectrum antibacterial effect of silver nanoparticles to prevent peri-implant bacterial infection and inflammation and to improve the success rate and prolong the use of the implant. FE-SEM (field emission scanning electron microscopes), EDS (energy dispersive spectroscopy), and XPS (X-ray photoelectron spectroscopy) results showed that aluminosilicate non-vacuum sintering can form open micro- and nanoporous structures on HTZ surfaces, and that porous aluminosilicate coatings obtain a larger number, smaller size, and more uniformly shaped silver nanoparticles than smooth aluminosilicate coatings, and could be deposited deeper in the coating. The ICP-AES (inductively coupled plasma-atomic emission spectroscopy) results showed that the early silver ion release of both the smooth silver coating and the porous silver coating was obvious, the silver ion concentration released by the former was higher than that of the latter. However, the silver ion concentration released by the porous silver coating was higher than that of the smooth coating when the release slowed down. Both smooth and porous silver coatings both inhibited E. coli (Escherichia coli), S. aureus (Staphylococcus aureus), and L. acidophilus (L. acidophilus), and porous silver coatings had stronger antibacterial properties. The silver coating was successfully constructed on the surface of HTZ, through aluminium silicate sintering and silver nitrate solution impregnation. It was found that the high concentration environment of silver nitrate solution was more advantageous for nano-Ag deposition, and the non-vacuum sintered porous surface was able to obtain a larger number of nano-Ag particles with smaller sizes. The porous Ag coating exhibited superior antibacterial properties. It was suggested that the HTZ with silver coating had clinical application, and good antibacterial properties that can improve the survival rate and service life of implants.

Eco-friendly synthesis of anti-microbial and anti-fungal binary metal oxide decorated reduced graphene oxide nanocomposites with complimenting density functional studies

Recently, graphene-based nanocomposites are increasingly becoming popular for a variety of biological applications, due to their extraordinary physicochemical properties. Herein, we present an eco-friendly method for the preparation of a novel nanocomposite based on reduced graphene oxide (rGO) decorated with tin oxide (SnO2) and zinc oxide (ZnO) nanoparticles. The rGO and binary metal oxides-based nanocomposite (rGO/ZnO/SnO2) with enhanced biocompatibility was prepared by using Mentha longifolia extract as a non-hazardous reducing agent. The rich polyphenolic and flavonoids contents of Mentha longifolia have functioned as potential bio-reductants, which are not only suitable for the synthesis of rGO/ZnO/SnO2, but also effectively stabilized the resulting composite. Initially, to determine the reducing ability of Mentha longifolia, the redox potential and chemical composition of green extract was investigated by cyclic voltammetry (CV) and liquid chromatography-mass spectrometry (LC-MS), respectively. On the other hand, the structural composition and morphology of the resultant composite was confirmed by X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR) and UV–visible spectroscopy (UV), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS). Furthermore, the biological potential of rGO/ZnO/SnO2 is determined by evaluating the antimicrobial and antifungal properties of the resulting composite against various pathogens such as, Staphylococcus aureus (SA), Candida albicans (CA) and Clostridium dificile (CD). Notably, the composite has demonstrated superior antibacterial and antifungal properties when compared to its individual counterparts including rGO, SnO2 and ZnO. Density functional calculations complement the experimental findings, as the periodic boundary conditions reveal high binding energy of −14.8 keV for the rGO/ZnO/SnO2 nanocomposite.

Research Progress on Nanomaterials for Tissue Engineering in Oral Diseases.

Due to their superior antibacterial properties, biocompatibility and high conductivity, nanomaterials have shown a broad prospect in the biomedical field and have been widely used in the prevention and treatment of oral diseases. Also due to their small particle sizes and biodegradability, nanomaterials can provide solutions for tissue engineering, especially for oral tissue rehabilitation and regeneration. At present, research on nanomaterials in the field of dentistry focuses on the biological effects of various types of nanomaterials on different oral diseases and tissue engineering applications. In the current review, we have summarized the biological effects of nanoparticles on oral diseases, their potential action mechanisms and influencing factors. We have focused on the opportunities and challenges to various nanomaterial therapy strategies, with specific emphasis on overcoming the challenges through the development of biocompatible and smart nanomaterials. This review will provide references for potential clinical applications of novel nanomaterials in the field of oral medicine for the prevention, diagnosis and treatment of oral diseases.

Preparing High Strength and Elongation of Biodegradable Zinc–Magnesium Alloys with Superior Antibacterial Properties and Biocompatibility

The extrusion-formed Zn–0.5Mg alloy got a improved elongation and tensile strength by the addition of Mn. The influence of Mn on the strength contribution was investigated by comparing the microstructures of the designed Zn–0.5Mg and Zn–0.5Mg–0.2Mn alloys. The deformed binary Zn–Mg alloy had a grain size of 9 μm, and the grain size of the deformed ternary Zn–Mg–Mn alloy was 3 m. This result indicated that the extrusion-formed Zn–Mg–Mn alloy had a greater contribution to grain boundary strengthening than the extrusion-formed Zn–Mg alloy. Furthermore, the precipitates in the two alloys show significant differences in size, morphology, density, and variety. Precipitates in the Mn-containing Zn alloy showed a smaller size, higher density, and the ratio of length and diameter. The high elongation rate of the extrusion-formed Zn–Mg–Mn alloy was attributed to the fully fragmented Mg2Zn11 and deformable MnZn13 phases. In addition to enhancing its mechanical characteristics, the Zn–Mg–Mn alloy, as extruded, exhibits the same corrosion rates, antibacterial properties, and biocompatibility. These results are helpful in expanding the applications of Zn alloys in the orthopaedic field.

An Integrated Therapeutic and Preventive Nanozyme-Based Microneedle for Biofilm-Infected Diabetic Wound Healing.

The healing of biofilm-infected diabetic wounds characterized by a deteriorative tissue microenvironment represents a substantial clinical challenge. Current treatments remain unsatisfactory due to the limited antibiofilm efficacy caused by weak tissue and biofilm permeability of drugs and the risk of reinfection during the healing process. To address these issues, an integrated therapeutic and preventive nanozyme-based microneedle (denoted as Fe2 C/GOx@MNs) is engineered. The dissolvable tips with enough mechanical strength can deliver and rapidly release Fe2 C nanoparticles (NPs)/glucose oxidase (GOx) in the biofilm active regions, enhancing tissue and biofilm permeability of Fe2 C NPs/GOx, ultimately achieving highly efficient biofilm elimination. Meanwhile, the chitosan backing layer can not only act as an excellent physical barrier between the wound bed and the external environment, but also prevent the bacterial reinvasion during wound healing with its superior antibacterial property. Significantly, the biofilm elimination and reinfection prevention abilities of Fe2 C/GOx@MNs on wound healing are proved on methicillin-resistant Staphylococcus aureus-biofilm-infected diabetic mouse model with full-thickness wound. Together, these results demonstrate the promising clinical application of Fe2 C/GOx@MNs in biofilm-infected wound healing.

The Biogenic Synthesis of Bimetallic Ag/ZnO Nanoparticles: A Multifunctional Approach for Methyl Violet Photocatalytic Degradation and the Assessment of Antibacterial, Antioxidant, and Cytotoxicity Properties.

In this study, bimetallic nanoparticles (NPs) of silver (Ag) and zinc oxide (ZnO) were synthesized using Leptadenia pyrotechnica leaf extract for the first time. Monometallic NPs were also obtained for comparison. The characterization of the prepared NPs was carried out using various techniques, including UV-Visible spectroscopy (UV-Vis), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The latter confirmed the crystalline nature and diameter of the monometallic and bimetallic NPs of Ag and ZnO. The SEM images of the prepared NPs revealed their different shapes. The biological activities of the NPs were evaluated concerning their antibacterial, antioxidant, and cytotoxic properties. The antibacterial activities were measured using the time-killing method. The results demonstrated that both the monometallic and bimetallic NPs inhibited the growth of Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria. The antioxidant activities of the NPs were evaluated using the DPPH (2,2-diphenyl-1-picrylhydrazyl) assay and their cytotoxicity was checked using the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. The results indicated that the controlled quantity of the monometallic and bimetallic NPs did not affect the viability of the cells. However, the decreased cell (L-929) viability suggested that the NPs could have anticancer properties. Furthermore, the photocatalytic degradation of methyl violet and 4-nitrophenol was investigated using the prepared Ag/ZnO NPs, examining the factors affecting the degradation process and conducting a kinetic and thermodynamic study. The prepared Ag/ZnO NPs demonstrated good photocatalytic degradation (88.9%) of the methyl violet (rate constant of 0.0183 min-1) in comparison to 4-nitrophenol (NPh), with a degradation rate of 81.37% and 0.0172 min-1, respectively. Overall, the bimetallic NPs showed superior antibacterial, antioxidant, cytotoxic, and photocatalytic properties compared to the monometallic NPs of Ag and ZnO.

Cu2(OH)3Cl microspheres with self-assembled nanostructures through a dissolution regulation reaction and exhibits excellent antibacterial activity

Basic copper chloride (Cu2(OH)3Cl) microspheres with different surface nanostructure were synthesized via the dissolution regulation of calcite in CuCl2 solution. We studied the influence of CuCl2 concentration, reaction time and reaction temperature on the formation of Cu2(OH)3Cl, and the products were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy and transmission electron microscopy. The concentration of CuCl2 has a great influence on the dissolution rate of calcite, dispersed microsphere particles assembled by nano-blocks formed in 20 mM CuCl2 solution. The surface of Cu2(OH)3Cl microsphere change from nano-block to nano-rod with increasing the reaction time from 20 min to 2 h Cu2(OH)3Cl microspheres with surface structure changed from nano-sheet, nano-plate to nano-block with the reaction temperature increase from 37 °C to 70 °C. The Cu2(OH)3Cl microsphere also displays superior antibacterial properties against S. aureus and E. coli. This work displays a new strategy to synthesize functional materials by the use of dissolution regulation methods.

Development of κ-carrageenan-PEG/lecithin bioactive hydrogel membranes for antibacterial adhesion and painless detachment

The issue of wound dressing adherence poses a substantial challenge in the field of wound care, with implications both clinically and economically. Overcoming this challenge requires the development of a hydrogel dressing that enables painless removal without causing any secondary damage. However, addressing this issue still remains a significant challenge that requires attention and further exploration. The present study is focused on the synthesis of hydrogel membranes based on κ-carrageenan (CG), polyethylene glycol (PEG), and soy lecithin (LC), which can provide superior antioxidant and antibacterial attachment properties with a tissue anti adhesion activity for allowing an easy removability without causing secondary damage. The (CG-PEG)/LC mass ratio was varied to fabricate hydrogel membranes via a facile approach of physical blending and solution casting. The physicochemical properties of (CG-PEG)/LC hydrogel membranes were studied by scanning electron microscopy (SEM), Fourier transforms infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and mechanical analyses. The membranes showed significantly enhanced mechanical properties with excellent flexibility and had high swelling capacity (˃1000 %), which would provide a moist condition for wound healing. The membranes also exhibited excellent free radical scavenging ability (>60 %). In addition, the (CG-PEG)/LC hydrogel membranes showed reduced peel strength 26.5 N/m as a result of weakening the hydrogel-gelatin interface during an in vitro gelatin peeling test. Moreover, the membrane showed superior antibacterial adhesion activity (>90 %) against both S. aureus and E. coli due to the presence of both PEG and LC. The results also suggested that the hydrogel membranes exhibit NIH3T3 cell antiadhesion property, making them promising material for easy detachment from the healed tissue without causing secondary damage. Thus, this novel combination of (CG-PEG)/LC hydrogel membranes have immense application potential as a biomaterial in the healthcare sector.