Superabsorbent Polymer Research Articles

Synergistic incorporation of calcium and zinc fertilizers in superabsorbent polymers

Synergistic incorporation of calcium and zinc fertilizers in superabsorbent polymers

Superabsorbent Polymers for Internal Curing Concrete: An Additional Review on Characteristics, Effects, and Applications

Superabsorbent polymers (SAPs) are a promising admixture that can provide internal curing to freshly cast concrete and enhance concrete properties. Although many reviews have explored aspects of SAPs, the links among SAPs’ chemical and physical properties, internal curing behaviors, concrete performance, and their large-scale applications are often weakly elucidated. This paper provides an additional review of the chemical structures and physical dimensions of SAPs and their effects on the internal curing kinetic behavior as well as on concrete properties, such as workability, strength, and durability. In addition, different approaches to introducing SAP particles into concrete mixtures are also summarized. Case studies on the use of SAPs in the concrete industry are introduced to provide a better understanding of the greatest potential of SAPs in field applications. The results confirm that the utilization of SAPs in concrete mixtures provides multiple benefits such as improved water curing, reduced shrinkage, and enhanced workability. Selecting the appropriate SAPs is crucial and involves considering factors like absorption rate, durability, and stability. However, achieving uniform distribution of dry SAPs in concrete poses challenges. Further research is required to gain a deeper understanding of the impact of SAPs on transport properties and frost durability. Additionally, the absence of a standard makes it difficult to maintain consistent water-to-cement ratios. These findings provide a theoretical foundation for using SAPs to enhance concrete performance while also highlighting future research directions and challenges. In this article, scientists, engineers, and contractors will find a comprehensive explanation encompassing laboratory investigations, field implementation, and relevant guidance.

Synthesis of Superabsorbent Polymers Based on Sulfated Starch and Study of Their Water Absorption Properties

Synthesis of Superabsorbent Polymers Based on Sulfated Starch and Study of Their Water Absorption Properties

Self-Healing and Mechanical Behaviour of Fibre-Reinforced Ultra-High-Performance Concrete Incorporating Superabsorbent Polymer Under Repeated and Sustained Loadings

This study investigated the mechanical responses and self-healing capability of incorporating superabsorbent polymer (SAP) particles in Fibre-Reinforced Ultra-High-Performance Concrete (UHPC) mixes under repetitive flexural and sustained tensile loadings. UHPC with SAP addition of 0.3% and 0.4% of the binder ratio were studied along with a control UHPC mix. The methodology included investigating the mechanical properties of these mixes under ambient, water, and 100% of relative humidity (RH) curing conditions. In addition, the mechanical performance of ambient-, water-, and 100% RH-cured prismatic specimens (100 mm × 100 mm × 500 mm) under repeated load was studied under the same curing conditions. Prismatic specimens (75 mm × 75 mm × 500 mm) were kept under cure conditions of wet and dry cycles with applied tensile load for 28 days for the sustained tensile load. The results showed that incorporating SAP into UHPC enhances the elastic modulus, flexural strength, and tensile strength. Also, mixes with SAP have exhibited compressive strength above 120 MPa after 90 days. Furthermore, the load recovery of the prisms under repetitive flexural load and prisms under sustained tensile loading demonstrated the self-healing efficiency of SAP incorporated into the UHPC mixes higher than the control mix specimens.

Effects of superabsorbent polymer and natural zeolite on shrinkage, mechanical properties, and porosity in ultra-high performance concretes

The low water-to-binder ratio of ultra-high performance concrete (UHPC) often causes shrinkage and cracking due to early-age self-desiccation. This leads to significant initial dimensional instability, which may compromise structural integrity. As a promising solution, internal curing agents such as superabsorbent polymers (SAP) and natural zeolite have the potential to mitigate shrinkage and achieve self-stressing properties. This research aims to provide a comprehensive comparison between SAP and zeolite's effects within a consistent UHPC formulation. Six UHPC mixtures (including the reference mixture) were designed: three with SAP dosages of 0.2%, 0.4%, and 0.6% by cement mass, and two with zeolite replacing silica fume at 25% and 50% by mass. Various testing methods, including autogenous and drying shrinkage assessment, heat of hydration and thermogravimetric analysis, compressive strength evaluation, mercury intrusion porosimetry (MIP), nuclear magnetic resonance (NMR), were employed to assess the mixtures at different stages of curing. The result reveals that the incorporation of SAP and zeolite in the mixtures significantly reduces UHPC's early-age autogenous shrinkage. Moreover, SAP and zeolite additions impact mechanical properties, demonstrating that a balance between shrinkage control and compressive strength can be reached, through an optimization of the additions to achieve the desired performance. Microstructural analysis through MIP and NMR reveals increased overall porosity of the UHPC with SAP and zeolite, suggesting that low-field NMR can be a valuable tool for complementing conventional test methods. The outcome of this study provided valuable insights into optimizing the balance between durability and mechanical performance, paving the way for more sustainable and cost-effective applications of UHPC in modern construction practices.

Exploring the role of SAP chemical composition in the internal curing of high-performance cementitious materials

This study investigates the impact of the chemical composition of superabsorbent polymers (SAPs) on their effectiveness in internal curing within high-performance cementitious materials. Although the use of commercial SAPs in cementitious systems has been widely researched, there is still no consensus on how different SAP structures influence material properties. For the first time, this research employs photoinitiated free radical polymerization technology to synthesize three structurally distinct SAPs: SAP with sulfonic acid groups (PAMPS), SAP with amide groups (PAM), and SAP with carboxyl groups (PAAs). The effects of these SAPs on the cement hydration process and microstructure were examined by analyzing their water absorption behavior in cement filtrate. The residual cation content on the SAP surface was evaluated using EDS, while XRD and TGA were used to study how SAP structure affects cement hydration products. Furthermore, the impact of these SAPs on the strength and autogenous shrinkage of the material was investigated. The results indicate that PAMPS, with its sulfonic acid groups, exhibited stable water absorption performance in the alkaline cement environment, promoting hydration reactions and increasing the formation of needle-shaped C-S-H. This stability contributed to mitigating the negative effects on mechanical properties. While the inclusion of SAPs generally reduced the strength of the cement matrix, PAMPS was the most effective in mitigating autogenous shrinkage, achieving a shrinkage mitigation efficiency of 86 %. These findings highlight the importance of SAP chemical structure in influencing cement hydration and material performance, offering insights for the development of effective internal curing agents to enhance high-performance concrete.

Roles of superabsorbent polymers (SAPs) and palm oil fuel ash (POFA) on the strength, cost analysis and CO2 emission of lightweight concrete: Comparison with aluminum-based aerated concrete

This work investigated the effects of superabsorbent polymers (SAPs) as pore-forming agent and palm oil fuel ash (POFA) as sand replacement (0-100% by weight) on the strength, economic feasibility, and CO2 emissions for lightweight concrete production. The product properties were compared with the traditional aerated concrete (with aluminum powder), which aimed to shed light on the use of SAPs and POFA for manufacturing a more sustainable lightweight concrete. The use of POFA to replace sand increased the cost of production by approximately 1-7% and CO2 emissions by approximately 3-12% due primarily to the transportation of the POFA from the oil palm fuel power plant, which could be avoided if produced on site of or near the power plant. The use of SAPs in the preparation of the lightweight concrete led to a reduced compressive strength compared to the aerated concrete, especially in the autoclaved samples, calculated as 15-33% for 28 days and 44-56% for autoclaved curing, possibly due to a collapse of the porous structure under high temperature and pressure. These drawbacks could be eliminated if the natural SAPs in the form of fine particle size were treated with Ca2+ in agro-waste ash so as to facilitate and enhance the pozzolanic reaction during the curing phase. The fossil-based SAPs could then be replaced with the organic-based ones, which would be a more sustainable construction material for a lower-carbon society. However, further investigations into other aspects of these materials should be conducted.

3d Mapping Of Stiffness Evolution Of Hardening Concrete With Saps Using Elastic Wave Tomography

Phenomena occurring during the delicate phase of concrete curing can have a strong influence on the final mechanical properties. Therefore, monitoring the changes during hydration can provide meaningful information on the material properties. Lately, non-destructive techniques have received great attention for monitoring earlyage concrete. This paper aims to assess the ultrasonic velocity and stiffness development of hardening concrete during various curing stages using the Elastic Wave Tomography (EWT) technique. The monitoring of the curing process starts as soon as seven hours after casting and lasts up to seventy hours. A three-dimensional (3D) wave velocity map is created, and conventional concrete is compared to concrete containing SuperAbsorbent Polymers (SAPs), a novel admixture used for shrinkage mitigation by providing internal curing in the cementitious matrix. However, SAPs have been proven to reduce compressive strength when added to concrete, due to the increased porosity they induce. This porosity may also result in the reduction of the wave velocity. However, the internal curing provided by the SAPs can promote the formation of new hydration products in the matrix and thus (partly) compensate for the strength loss making the uniformity of the internal curing another important point of concern. EWT can provide global information on the homogeneity of the influence of the SAPs in the cementitious matrix as opposed to the wave velocity of a single wave path that is usually examined in practice. In addition, the determination of the early-age stiffness evolution can be connected to the final mechanical properties of the material. The dynamic Young’s Modulus is calculated and compared to the static Young’s modulus at 28 days. Predictions towards the static Young’s modulus are also made, showing good agreement.

A methodology for selection of solid desiccants in energy recovery ventilators

Controlling indoor humidity levels is essential for maintaining acceptable indoor air quality in buildings. The use of energy recovery ventilators (ERVs) is an energy-efficient way to regulate indoor air humidity. Fixed-bed regenerators and rotary wheels are widely used ERVs because of their high sensible and latent effectiveness. These ERVs are made of desiccant-coated substrates, which enable them to transfer moisture between the supply and exhaust air streams. However, the moisture transfer ability of ERVs depends on the physiochemical and sorption properties of desiccants. Extensive, full-scale experiments are required to determine the best desiccant material for these systems. This paper presents a simplified method of selecting suitable desiccant materials for ERVs. The methodology involves important characterization methods, literature correlations for performance prediction, and cost-effective testing methods prior to full-scale testing, and full-scale test methods are discussed in detail. Furthermore, the performance of a few newly derived materials is evaluated and compared with that of conventional desiccants such as silica gel and molecular sieves. The highest latent effectiveness was obtained for composite of super absorbent polymer (SAP) with potassium formate (SAP-HCO2K-50 %), all-polymer porous solid desiccant (APPSD) and metal organic framework (MOF)–MIL–101 (Cr), followed by activated carbon fibre felt (ACF) Silica sol-LiCl30, SAP, silica gel, MOF–303, and molecular sieve. Researchers and manufacturers would benefit from the proposed methodology and presented data in developing new desiccant materials for ERV applications.

Effects of mix composition on the mechanical, physical and durability properties of alkali-activated calcined clay/slag concrete cured under ambient condition

Alkali-activated concrete (AAC), a possible alternative to ordinary Portland cement (OPC), provides increased environmental advantages, notably lower carbon emissions. Likewise, similar to OPC, it faces durability problems under severe environments. This study evaluated the effectiveness and durability of alkali-activated concretes containing low-grade calcined clay and granulated blast furnace slag (GGBFS), using NaOH/KOH as activators and MgO and superabsorbent polymer (SAP) as additives. The study's focus was on their physical-mechanical characteristics and performance under accelerated carbonation and chloride diffusion. Findings showed that calcined clay-GGBFS alkali-activated concretes exhibited a compressive strength range of 41.2–53.3 MPa, positioning them as a viable concrete for many structural usages. Nevertheless, the modified-RCPT (10 V) and NT Build 492 tests showed all concretes falling into the "high chloride penetrability" category, with values exceeding 350 coulombs and 13.5 (×10−12 m2/s) for the non-steady-state migration coefficient (Dnssm). NaOH and sodium silicate led to higher compressive strengths compared to KOH. Furthermore, the chloride migration coefficient of alkali-activated concrete blends ranged from 55.68 to 121.14 (× 10−12 m2/s). The incorporation of 0.6 % SAP decreased compressive strength but improved the non-steady-state migration coefficient (Dnssm). Lastly, MgO-enriched samples showed the lowest water absorption and carbonation depth, attributed to the buffering action of magnesium phases, reducing carbonate formations, as revealed by XRD analysis.

An Artemisia Sphaerocephala Krash gum/acrylic acid-based novel eco-friendly superabsorbent polymer: Its synthesis and properties promoting seed germination

An affordable, eco-friendly, and salt-tolerant superabsorbent polymer (SAP) has been synthesised from Artemisia sphaerocephala Krasch gum (ASKG), a naturally hydrophilic heteropolysaccharide extracted from the seeds of Artemisia sphaerocephala and acrylic acid (AA) through free-radical polymerisation (ASKG/AA-SAP) using ammonium persulfate (APS) as the initiator and N, N´-methylenebisacrylamide (MBA) as the cross-linker. Morphological and thermal analyses confirmed that ASKG/AA-SAP showed a uniformly interconnected porous structure with a high thermal stability and a gradual decomposition rate. Notably, ASKG/AA-SAP demonstrated exceptional water absorbency, reaching maximum values of 1250g·g-1 in distilled water and 152g·g-1 in a 0.9wt% NaCl solution. Work on relevant parameters related to SAP, viz water absorbency, water retention, and reusability under different influencing factors has been carried out, as also the swelling capacity, salt tolerance, and the ability to withstand a wide range of pH values (4-12) and temperatures (5-55°C). Furthermore, ASKG/AA-SAP has also demonstrated water retention, viz maintaining a rate of 34.19% after 5h in distilled water, which are superior to those of other SAPS tested. Interestingly, the application of ASKG/AA-SAP has resulted in a substantial improvement in seed germination of desert plant, as evidenced by an increase in germination rate and germination energy of Hedysarum scoparium by 58.66% and 35.71%, respectively, compared to the control group. ASKG/AA-SAP, therefore, holds excellent potential for application in agri-forestry production and afforestation works within arid and semi-arid regions.

Synergistic effects of SAP and PGPR on physiological characteristics of leaves and soil enzyme activities in the rhizosphere of poplar seedlings under drought stress.

Super absorbent polymers (SAP) provide moisture conditions that allow plant growth-promoting rhizobacteria (PGPR) to enter the soil for acclimatization and strain propagation. However, the effects of SAP co-applied with PGPR on the physiological characteristics of leaves and rhizosphere soil enzyme activities of poplar seedlings are not well understood. Here, a pot experiment using one-year-old poplar seedlings with five treatments, normal watering, drought stress (DR), drought stress + SAP (DR+SAP), drought stress + Priestia megaterium (DR +PGPR) and drought stress + SAP + P. megaterium (DR+S+P), was performed to analyze the contents of non-enzymatic antioxidants, osmotic regulators and hormones in leaves, as well as rhizosphere soil enzyme activities. Compared with normal watering, the DR treatment significantly decreased the contents of dehydroascorbate (DHA; 19.08%), reduced glutathione (GSH; 14.18%), oxidized glutathione, soluble protein (26.84%), indoleacetic acid (IAA; 9.47%), gibberellin (GA) and zeatin (ZT), the IAA/abscisic acid (ABA), GA/ABA, ZT/ABA and (IAA+GA+ZT)/ABA (34.67%) ratios in leaves, and the urease and sucrase activities in the rhizosphere soil. Additionally, it significantly increased the soluble sugar, proline and ABA contents in leaves. However, in comparison with the DR treatment, the DR+S+P treatment significantly increased the DHA (29.63%), GSH (15.13%), oxidized glutathione, soluble protein (29.15%), IAA (12.55%) and GA contents, the IAA/ABA, GA/ABA, ZT/ABA and (IAA+GA+ZT)/ABA (46.85%) ratios in leaves, and the urease, sucrose and catalase activities in rhizosphere soil to different degrees. The soluble sugar, proline and ABA contents markedly reduced in comparison to the DR treatment. The effects of the DR+SAP and DR+PGPR treatments were generally weaker than those of the DR+S+P treatment. Thus, under drought-stress conditions, the simultaneous addition of SAP and P. megaterium enhanced the drought adaptive capacities of poplar seedlings by regulating the non-enzymatic antioxidants, osmotic regulators, and endogenous hormone content and balance in poplar seedling leaves, as well as by improving the rhizosphere soil enzyme activities.

Acoustic emission analysis of self-healing properties in cementitious materials with superabsorbent polymers (SAPs) during different environments

This paper studies the coupling effect of superabsorbent polymers (SAPs) and fly ash on the self-healing performance of mortar. The three-point bending test was used to evaluate the mechanical property recovery effect of mortar specimens after curing in different environments, and the relationship between crack closure rate, flexural strength and flexural stiffness recovery was established. The amplitude and energy in acoustic emission were used to evaluate the characteristics of self-healing products. The results show that compared with the control specimens, the addition of SAP improves the crack closure rate and mechanical property recovery effect of mortar specimens. With the increase of SAP particle size and content, the mechanical property recovery rate and crack closure rate increase accordingly. The order of self-healing effect of specimens in different healing environments is saturated calcium hydroxide > water >97 % RH > air. After reloading, the amplitude number and cumulative energy of samples with SAP are larger than those of the control specimens. The SEM results also prove this, and the self-healing products in the crack area of the mortar specimens with SAP are denser than those in the control specimens.

Absorption and Release mechanism of superabsorbent polymers and its impact on shrinkage and durability of internally cured concrete – A review

Superabsorbent polymers (SAP) are considered as a promising assortment of chemical admixtures which present novel prospects for influencing the properties of cementitious materials in the fresh, setting, and hardened states. However, the diversity of commercial SAP, especially in terms of monomers, crosslinking agents, and synthesis methods, still poses many obstacles in their large-scale application. Therefore, this review aims to shed light on intrinsic absorption and release mechanism of various SAP and its impact on rheological properties, mechanical properties, shrinkage properties, and durability for cementitious materials. Our research findings indicate significant differences in the water absorption and release mechanisms between ionic and non-ionic SAP. The swelling of non-ionic SAP is dependent on the osmotic pressure formed between the polymer network and the solution. In contrast, ionic SAP not only exhibits osmotic properties but also generates charged hydrophilic groups in solution, which is a crucial factor contributing to polymer swelling. The water absorption characteristics of SAP facilitate the regulation of early cement matrix hydration and ensure the long-term stability of the concrete structure. These attributes are crucial for maintaining stable development in cement hydration and ensuring the overall structural integrity over time. The knowledge gleaned from this review offers a robust framework for the further research work on SAP and serves as support for practical application of internally cured concrete in construction engineering that need to withstand challenging environmental conditions.

Synergistic inhibition effect and mechanism of an inhibitor for entire process inhibition of coal spontaneous combustion

Traditional coal spontaneous combustion (CSC) inhibitors, while effective, have limitations such as frequent application or short-term efficacy. To this end, we developed a slow-release and water-soluble synergistic inhibitor (SWSI) to achieve long-term CSC inhibition. The SWSI was formulated by integrating synergistic antioxidants (SA) composed of ascorbic acid (AsA) and Fe-superoxide dismutase (Fe-SOD) dissolved in a super absorbent polymer (SAP) encapsulated within hydrogel microcapsules. The effectiveness of SWSI was evaluated through simultaneous thermal analysis and in-situ free radical tests. The formulation optimization demonstrated that AsA and Fe-SOD had the maximum synergistic inhibition effect at a 1:1 molar ratio. The optimal SA: SAP ratio of 3:1 achieved the lowest oxygen consumption rate and highest inhibition rate. The encapsulation formulation, consisting of 3% SA, 6% PAM, 1% CaCl2, and 0.5% citric acid, generated the highest swelling ratio. Simultaneous thermal analysis and in-situ free radical tests indicated that SWSI greatly increased feature temperatures and the apparent activation energy, lowered reaction heat, and substantially reduced free radical concentration in the full oxidation process. The newly developed SWSI offers a significant advancement in long-term CSC prevention by integrating physical and chemical inhibition, which provides sustained and effective inhibition throughout the entire oxidation process.

Evaluating the Effectiveness of the Biodegradable Superabsorbent Polymer (Fasal Amrit) on Soil Hydrological Properties: A Laboratory Rainfall Simulation Study

Superabsorbent polymers (SAPs) are effective soil amendments that can control soil erosion by improving soil quality. However, many commercial SAPs face challenges including limited biodegradability, high costs, and adverse effects on soil hydrological properties, which can lead to increased water and soil loss. This study examined the potential of lower dosages of biodegradable SAPs to improve the hydrological properties of “Shimajiri-maji” (clay) soil. Three concentrations of biodegradable Fasal Amrit polymer (EFP) (P1: 0, P2: 3 g m−2, and P3: 6 g m−2) were evaluated under three simulated rainfall intensities (I1: 35; I2: 70 and I3: 110 mm h−1) and two gradients (7.5%, and 15%) during consecutive storms. The time to generate runoff, infiltration, runoff, soil loss, and water storage (WS) were quantified over one hour. The results show that runoff generation was delayed in EFP-treated soils compared to the control. Both polymer treatments enhanced infiltration (P2 > P3 > P1) and reduced runoff and soil loss (P2 < P3 < P1). Higher EFP rates improved water storage at surface depths (P3 > P2 > P1). EFP-treated soils exhibited lower interrill erodibility, suggesting greater resistance to soil erosion compared to the control. EFP treatments also significantly improved the soil’s physical properties (bulk density, porosity, organic matter, aggregate stability). EFPs can diminish runoff and soil loss as the EFP-treated plots exhibited greater aggregate stability than the control. It was concluded that low EFP concentrations can improve soil hydrological properties and mitigate soil erosion. Further investigations are needed to optimize the EFP concentrations for different soil types.

Adjustment of temperature sensitivity using hydrophilic materials to develop superabsorbent polymers based on poly(N‐isopropyl acrylamide) as a temperature‐sensitive material

AbstractPoly(N‐isopropyl acrylamide) (PNIPAm) is a temperature‐sensitive material with a fast temperature response and a low critical solubilization temperature (LCST) of approximately 32°C, but it swells only 20–40 times after absorbing water. To enhance its water‐absorption properties, we introduced hydrophilic monomers into the NIPAm monomer to prepare a ternary copolymerized superabsorbent polymer. In addition, we characterized this copolymer using various techniques and analyzed its temperature‐sensitive and water‐absorbing properties. The results showed that the optimal synthesis conditions consisted of m(NIPAm):m(AMPS) = 4, 1.5% initiator, 0.3% cross‐linking agent, and 1.0% quaternized ammonium chitosan, which ensured the significant temperature sensitivity of the water‐absorbent resin. Under these conditions, the swelling ratio of the water‐absorbing resin reached 235.3 times, the LCST value was 44.6°C, the water retention rate was 84.9% at 25°C after 12 h, and the shrinkage ratio reached 81.7% at 60°C after 3 h, and 97.6% after 12 h. The resulting material could be rapidly dehydrated at high temperatures and presented clear temperature‐sensitive characteristics while maintaining excellent water‐absorbing properties.

Mechanical Properties of Recycled Concrete Incorporated with Super-Absorbent Polymer and Machine-Made Stone Powder under the Freeze-Thaw Cycle Environment.

Recycled concrete incorporating additional super-absorbent polymer (SAP) and machine-made stone powder (MSP) was prepared using a two-factor, four-level orthogonal test. To enhance the frost resistance of recycled concrete and improve its mechanical properties, such as compressive and flexural strength, the prepared concrete underwent 200 freeze-thaw cycles. Before freeze-thaw cycles, the amount of SAP has a predominant influence on the mechanical properties of recycled concrete in comparison with MSP. After 200 cycles of freeze-thaw, the influence of MSP became more significant than that of SAP. Typically, the compressive strength and flexural strength exhibited a trend of initially increasing and then decreasing as the contents of SAP and MSP increased. The optimized recycled concrete was identified as S16M6, containing 0.16% SAP and 6% MSP, as demonstrated by the minimal strength loss after freeze-thaw cycles. This study also proposed a linear regression model for predicting the mechanical properties which offered valuable guidance for the engineering application of recycled concrete mixed with SAP under the freeze-thaw cycle environment.

Development of Slow-Release Fertilizers with Function of Water Retention Using Eco-Friendly Starch Hydrogels

Over the past two decades, the development and commercialization of slow-release fertilizers (SRFs) have significantly advanced, with the primary aim of mitigating environmental issues associated with excessive fertilizer use. A range of methodologies, including chemical and physical reactions, incorporation into carriers with porous and layered structures, and coating techniques, have been explored and refined. On the other hand, global challenges such as drought and desertification further underscore the need for SRFs that not only control nutrient release but also improve soil moisture retention. This paper reviews the development and application of eco-friendly starch hydrogels as fertilizer carriers and water retention for SRFs, particularly starch-based superabsorbent polymers (SAPs) produced through grafting copolymerization with acrylamide. This review explores both scientific issues, such as the microstructures and releasing mechanisms of SAPs, and technical development, involving copolymerization technologies, multi-initialization processes, methods of loading fertilizer into hydrogel, etc. Starch, as both a biodegradable and renewable carbohydrate polymer, offers distinct advantages due to its excellent chemical stability and high reactivity. The fabrication techniques of SAPs have been developed from traditional batch polymerization in aqueous solutions to more efficient, solvent-free reactive extrusion. The benefits of SRFs based on SAPs encompass enhanced soil aeration, the prevention of soil deterioration, the minimization of water evaporation, environmental pollution control, reduction in plant mortality, and prolonged nutrient retention within soil. In this review, we summarize the current progress, identify limitations in existing technologies, and propose future research directions to further enhance the performance of starch-based SRFs.

Liquid absorbent bamboo fiber foams: Towards 100% ligno-cellulosic menstrual absorbent pads

Traditional menstrual absorbent pads typically combine cellulose fiber fluff pulp with non-biodegradable, petroleum-based superabsorbent polymers (SAPs). To eliminate the need for SAPs, this study explores foaming as a method to create a highly porous lignocellulosic fiber network capable of storing large amounts of fluid. Bamboo fibers were chosen due to their high lignin content, which is expected to help maintain the structural integrity of the porous network during liquid absorption and preventing collapse compared to 100% cellulose fibers. The bamboo fiber foams demonstrated remarkable porosity and superior absorbency compared to commercial pads, but they exhibited lower water retention when subjected to compression. Refining the fibers and incorporating microfibrillated cellulose offer promising opportunities to enhance water retention.