Stiff Scaffolds Research Articles

Physical and Chemical Signals That Promote Vascularization of Capillary-Scale Channels.

Proper vascularization remains critical to the clinical application of engineered tissues. To engineer microvessels in vitro, we and others have delivered endothelial cells through preformed channels into patterned extracellular matrix-based gels. This approach has been limited by the size of endothelial cells in suspension, and results in plugging of channels below ~30 μm in diameter. Here, we examine physical and chemical signals that can augment direct seeding, with the aim of rapidly vascularizing capillary-scale channels. By studying tapered microchannels in type I collagen gels under various conditions, we establish that stiff scaffolds, forward pressure, and elevated cyclic AMP levels promote endothelial stability and that reverse pressure promotes endothelial migration. We applied these results to uniform 20-μm-diameter channels and optimized the magnitudes of pressure, flow, and shear stress to best support endothelial migration and vascular stability. This vascularization strategy is able to form millimeter-long perfusable capillaries within three days. Our results indicate how to manipulate the physical and chemical environment to promote rapid vascularization of capillary-scale channels within type I collagen gels.

Open-source Selective Laser Sintering (OpenSLS) of nylon and biocompatible polycaprolactone

Event Abstract Back to Event Open-source Selective Laser Sintering (OpenSLS) of nylon and biocompatible polycaprolactone Ian S. Kinstlinger1, Andreas Bastian1, Daniel H. Hwang1, Anderson Ta1, Samantha J. Paulsen1, Tim Schmidt2 and Jordan S. Miller1 1 Rice University, Bioengineering, United States 2 Lansing Makers Association, United States Introduction: Selective Laser Sintering (SLS) is an additive manufacturing process in which a laser patterns powdered starting materials into solid 3D structures in a layer-by-layer manner. Features which are challenging to fabricate using other additive processes (e.g. overhangs, underhangs, branches, and bifurcations) are readily accessible using SLS. SLS has found great utility in the fabrication of scaffolds for bone tissue engineering[1] and patient-specific splints for human airway stabilization[2]. Despite the potential for fabrication of complex, high-resolution structures with SLS using diverse materials (including biomaterials), prohibitive costs of commercial systems have hindered the wide adoption of this technology in the scientific community. We hypothesized that a consumer laser cutter could be used in conjunction with open-source hardware and software to inexpensively perform SLS. Here, we implemented and characterized sintering with polymers and biomaterials, introduced post-processing techniques for sintered parts, and demonstrated biocompatibility of sintered polycaprolactone (PCL). Methods: We implemented OpenSLS by installing a custom powder handling module inside a laser cutter and overriding the native electronics[3]. Sintered parts were assessed by scanning electron microscopy (SEM) and microcomputed tomography (µCT). PCL biocompatibility was evaluated by seeding human mesenchymal stem cells (hMSC) labeled with GFP and H2B-mCherry on sintered PCL surfaces and imaging with epifluorescent microscopy. Results and Discussion: Nylon was sintered into structures with sub-millimeter features and overhanging/branching regions (Figure 1). Sintered surfaces appear similar to those of nylon parts fabricated on commercial SLS systems[4]. Nylon filaments exhibit a mostly fused core but show small irregular interior cavities. PCL was also sintered into lattice structures, which could be useful as bone scaffolds. Finding that coarse PCL grains yielded rough, poorly connected lattices, we developed a vapor smoothing technique (Figure 2) which reduced the average surface roughness from 120µm to 5µm and increased the elastic modulus from 30MPa to 60MPa. The stiffer scaffolds more closely match bone mechanics while the smoothed surfaces enhance cell adhesion. hMSCs attached, survived, and exhibited characteristic spindle-like morphology on both vapor-smoothed and unsmoothed sintered PCL (Figure 3), suggesting that sintered PCL will be useful for cell studies. Conclusions: Architecturally complex, physiologically relevant structures can be fabricated at high resolution using a low-cost, open-source platform. The use of biomaterials in this system is straightforward and produces structures that are compatible with cell studies. OpenSLS could serve the scientific community as an accessible platform for fabricating structures composed of a wide range of materials, including non-traditional materials not supported by commercial SLS suppliers. We gratefully acknowledge the many open-source and related projects that critically facilitated this work, including Arduino.cc, RepRap.org, Ultimachine.com, Python.org, Blender.org, NIH ImageJ, Fiji.sc, slic3r.org, netfabb.com, pronterface.com, enblend.sourceforge.net, thingiverse.com, and openscad.org.; We are grateful to SeeMeCNC for assisting with the acquisition, installation, and configuration of the laser cutter that was converted into OpenSLS.

A hierarchical, stretchable and stiff fibrous biotemplate engineered using stagger-electrospinning for augmentation of rotator cuff tendon-healing.

The regeneration of fibrocartilage at the tendon-bone insertion site in rotator cuff tears (RCTs) is challenging due to the complexity of its composition and mechanical properties. In this study, hierarchical, stretchable and stiff fibrous scaffolds composed of microfibers of poly(ε-caprolactone) (PCL) and nanofibers of chitosan (CS) were fabricated using stagger-electrospinning for the augmentation of RCT-healing. It was found that the composite PCL-CS scaffolds had significantly improved strength and failure strain compared to the control CS scaffolds and increased stiffness compared to the control PCL scaffolds. These scaffolds also showed enhanced hydrophilicity, water absorption and a faster degradation rate compared to the PCL scaffolds. Moreover, they demonstrated better fibroblast attachment and proliferation compared to the PCL scaffolds. Radiological and histological analysis revealed that the PCL-CS scaffolds enhanced new bone formation (mineralization) and collagen and glycosaminoglycan expression (major components of extracellular matrix) compared to the PCL scaffolds. Furthermore, the torn tissues at the tendon-bone insertion site regenerated with the PCL-CS scaffolds showed higher strength and failure strain as well as stiffness compared to those repaired using only the PCL scaffolds. The above mentioned results suggest that the hierarchical, stretchable and stiff fibrous scaffolds engineered using stagger-electrospinning have great potential for the augmentation of RCT-healing.

Covalent conjugation of mechanically stiff graphene oxide flakes to three-dimensional collagen scaffolds for osteogenic differentiation of human mesenchymal stem cells

Mesenchymal stem cells (MSCs) preferentially differentiate to osteogenic lineage when cultured on mechanically stiff substrates. However, collagen sponges, clinically approved scaffolds for bone regeneration, provide soft microenvironment to MSCs. Here, we demonstrate that the covalent conjugation of mechanically stiff graphene oxide (GO) flakes to three-dimensional (3D) collagen scaffolds improves the mechanical properties of the scaffolds and promotes the osteogenic differentiation of human MSCs (hMSCs) cultured on the scaffolds. The covalent conjugation of GO flakes to collagen scaffolds increased the scaffold stiffness by 3-fold and did not cause cytotoxicity. hMSCs cultured on the GO-collagen scaffolds demonstrated significantly enhanced osteogenic differentiation compared to cells cultured on non-modified collagen scaffolds. The enhanced osteogenic differentiation observed on the stiffer scaffolds was likely mediated by MSC mechanosensing because molecules that are involved in cell adhesion to stiff substrates were either up-regulated or activated. The 3D GO-collagen scaffolds could offer a powerful platform for stem cell research and orthopedic regenerative medicine.

Cell-free carrier system for localized delivery of peripheral blood cell-derived engineered factor signaling: towards development of a one-step device for autologous angiogenic therapy

Spatiotemporally-controlled delivery of hypoxia-induced angiogenic factor mixtures has been identified by this group as a promising strategy for overcoming the limited ability of chronically ischemic tissues to generate adaptive angiogenesis. We previously developed an implantable, as well as an injectable system for delivering fibroblast-produced factors in vivo. Here, we identify peripheral blood cells (PBCs) as the ideal factor-providing candidates, due to their autologous nature, ease of harvest and ample supply, and investigate wound-simulating biochemical and biophysical environmental parameters that can be controlled to optimize PBC angiogenic activity. It was found that hypoxia (3% O2) significantly affected the expression of a range of angiogenesis-related factors including VEGF, angiogenin and thrombospondin-1, relative to the normoxic baseline. While all three factors underwent down-regulation over time under hypoxia, there was significant variation in the temporal profile of their expression. VEGF expression was also found to be dependent on cell-scaffold material composition, with fibrin stimulating production the most, followed by collagen and polystyrene. Cell-scaffold matrix stiffness was an additional important factor, as shown by higher VEGF protein levels when PBCs were cultured on stiff vs. compliant collagen hydrogel scaffolds. Engineered PBC-derived factor mixtures could be harvested within cell-free gel and microsphere carriers. The angiogenic effectiveness of factor-loaded carriers could be demonstrated by the ability of their releasates to induce endothelial cell tubule formation and directional migration in in vitro Matrigel assays, and microvessel sprouting in the aortic ring assay. To aid the clinical translation of this approach, we propose a device design that integrates this system, and enables one-step harvesting and delivering of angiogenic factor protein mixtures from autologous peripheral blood. This will facilitate the controlled release of these factors both at the bed-side, as an angiogenic therapy in wounds and peripheral ischemic tissue, as well as pre-, intra- and post-operatively as angiogenic support for central ischemic tissue, grafts, flaps and tissue engineered implants.

Biomechanical evaluation by AFM of cultured human cell-multilayered periosteal sheets

We previously demonstrated that thicker periosteal sheets with enhanced cell layering maintain their component cells at relatively immature stages of differentiation but express a high in vivo osteogenic potential. As it has been recently proposed that stiff scaffolds provide a mechanical cue to various cell types that promotes differentiation, we postulated that the maintenance of immature cells in our periosteal sheets is due to the mechanical stiffness of the multilayered-cell architecture. To demonstrate the biomechanical characteristics of our periosteal sheets, we have determined their stiffnesses with atomic force microscopy (AFM) and evaluated the expression of extracellular matrix (ECM) components specifically by both immunocytochemistry and a complementary DNA microarray technology. Compared to osteoblastic Saos2 cells, the cytoskeletal fibers were developed more in the periosteal cells, but the periosteal cells in monolayer culture developed before either the cells in the peripheral or central regions of the periosteal sheets developed. However, the nanoindentation by AFM distinguished the central region from the peripheral region. The peak stiffness values of cells were ordered as follows: tissue culture polystyrene (1.66GPa)≫dispersed (9.99kPa)>central region (5.20kPa)>peripheral regions (3.67kPa). Similarly, the degree of development of α-smooth muscle actin (αSMA) filaments within cells was dispersed>central region>peripheral region. In conjunction with the abundantly deposited ECM in the periosteal sheets, these findings suggest that the order of cell stiffness may depend on the integration of the stiffness of individual ECM components and the extent of cytoskeletal fiber formation. Because recently published data have demonstrated that the optimal stiffness for osteogenic differentiation is 25–40kPa, it is plausible that the periosteal cells residing in the less-stiff multilayer regions could be maintained at relatively immature stages under the control of the stem-cell medium in vitro but start differentiating when exposed to the proper stiffness upon release from the culture conditions at the implantation site.

Compression of Multilayered Composite Electrospun Scaffolds: A Novel Strategy to Rapidly Enhance Mechanical Properties and Three Dimensionality of Bone Scaffolds

One major limitation of electrospun scaffolds intended for bone tissue engineering is their inferior mechanical properties. The present study introduces a novel strategy to engineer stiffer scaffolds by stacking multiple layers and cold welding them under high pressure. Electrospun polydioxanone (PDO) and PDO:nanohydroxyapatite (PDO:nHA) scaffolds (1, 2, or 4 layered stacks) were compressed either before or after mineralizing treatment with simulated body fluid (SBF). After two weeks in SBF, scaffolds were analyzed for total mineral content and stiffness by Alizarin red S and uniaxial tensile testing, respectively. Scaffolds were also analyzed for permeability, pore size, and fiber diameter. Results indicated that compression of multiple layers significantly increased the stiffness of scaffolds while reducing mineralization and permeability. This phenomenon was attributed to increased density of fibers and loss of surface area due to fiber welding. Statistics revealed, the 4-layered PDO:nHA scaffold compressed first followed by mineralization in revised SBF had maximal stiffness, low permeability and pore size, and mineralization second only to noncompressed scaffolds. Within the limitations of permeability and pore size, this scaffold configuration represents an optimal midway for desired stiffness and mineral content for bone tissue engineering.

Mesenchymal stem cell fate is regulated by the composition and mechanical properties of collagen–glycosaminoglycan scaffolds

In stem cell biology, focus has recently turned to the influence of the intrinsic properties of the extracellular matrix (ECM), such as structural, composition and elasticity, on stem cell differentiation. Utilising collagen–glycosaminoglycan (CG) scaffolds as an analogue of the ECM, this study set out to determine the effect of scaffold stiffness and composition on naive mesenchymal stem cell (MSC) differentiation in the absence of differentiation supplements. Dehydrothermal (DHT) and 1-ethyl-3-3-dimethyl aminopropyl carbodiimide (EDAC) crosslinking treatments were used to produce three homogeneous CG scaffolds with the same composition but different stiffness values: 0.5, 1 and 1.5 kPa. In addition, the effect of scaffold composition on MSC differentiation was investigated by utilising two glycosaminoglycan (GAG) types: chondroitin sulphate (CS) and hyaluronic acid (HyA). Results demonstrated that scaffolds with the lowest stiffness (0.5 kPa) facilitated a significant up-regulation in SOX9 expression indicating that MSCs are directed towards a chondrogenic lineage in more compliant scaffolds. In contrast, the greatest level of RUNX2 expression was found in the stiffest scaffolds (1.5 kPa) indicating that MSCs are directed towards an osteogenic lineage in stiffer scaffolds. Furthermore, results demonstrated that the level of up-regulation of SOX9 was higher within the CHyA scaffolds in comparison to the CCS scaffolds indicating that hyaluronic acid further influences chondrogenic differentiation. In contrast, enhanced RUNX2 expression was observed in the CCS scaffolds in comparison to the CHyA scaffolds suggesting an osteogenic influence of chondroitin sulphate on MSC differentiation. In summary, this study demonstrates that, even in the absence of differentiation supplements, scaffold stiffness can direct the fate of MSCs, an effect that is further enhanced by the GAG type used within the CG scaffolds. These results have significant implications for the therapeutic uses of stem cells and enhance our understanding of the physical effects of the in vivo microenvironment on stem cell behaviour.

Optimization of Suture-Free Laser-Assisted Vessel Repair by Solder-Doped Electrospun Poly(ε-caprolactone) Scaffold

Poor welding strength constitutes an obstacle in the clinical employment of laser-assisted vascular repair (LAVR) and anastomosis. We therefore investigated the feasibility of using electrospun poly(ε-caprolactone) (PCL) scaffold as reinforcement material in LAVR of medium-sized vessels. In vitro solder-doped scaffold LAVR (ssLAVR) was performed on porcine carotid arteries or abdominal aortas using a 670-nm diode laser, a solder composed of 50% bovine serum albumin and 0.5% methylene blue, and electrospun PCL scaffolds. The correlation between leaking point pressures (LPPs) and arterial diameter, the extent of thermal damage, structural and mechanical alterations of the scaffold following ssLAVR, and the weak point were investigated. A strong negative correlation existed between LPP and vessel diameter, albeit LPP (484 ± 111 mmHg) remained well above pathophysiological pressures. Histological analysis revealed that thermal damage extended into the medial layer with a well-preserved internal elastic lamina and endothelial cells. Laser irradiation of PCL fibers and coagulation of solder material resulted in a strong and stiff scaffold. The weak point of the ssLAVR modality was predominantly characterized by cohesive failure. In conclusion, ssLAVR produced supraphysiological LPPs and limited tissue damage. Despite heat-induced structural/mechanical alterations of the scaffold, PCL is a suitable polymer for weld reinforcement in medium-sized vessel ssLAVR.

Substrate stiffness and contractile behaviour modulate the functional maturation of osteoblasts on a collagen–GAG scaffold

Anchorage-dependent cells respond to the mechanical and physical properties of biomaterials. One such cue is the mechanical stiffness of a material. We compared the osteogenic potential of collagen-glycosaminoglycan (CG) scaffolds with varying stiffness for up to 6 weeks in culture. The mechanical stiffness of CG scaffolds were varied by cross-linking by physical (dehydrothermal (DHT)) and chemical (1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide (EDAC) and glutaraldehyde (GLUT)) methods. The results showed that all CG substrates allowed cellular attachment, infiltration and osteogenic differentiation. CG scaffolds treated with EDAC and GLUT were mechanically stiffer, retained their original scaffold structure and resisted cellular contraction. Consequently, they facilitated a 2-fold greater cell number, probably due to the pore architecture being maintained, allowing improved diffusion of nutrients. On the other hand, the less stiff substrates cross-linked with DHT allowed increased cell-mediated scaffold contraction, contracting by 70% following 6 weeks (P < 0.01) of culture. This reduction in scaffold area resulted in cells reaching the centre of the scaffold quicker up to 4 weeks; however, at 6 weeks all scaffolds showed similar levels of cellular infiltration, with higher cell numbers found on the stiffer EDAC- and GLUT-treated scaffolds. Analysis of osteogenesis showed that scaffolds cross-linked with DHT expressed higher levels of the late stage bone formation markers osteopontin and osteocalcin (P < 0.01) and increased levels of mineralisation. In conclusion, the more compliant CG scaffolds allowed cell-mediated contraction and supported a greater level of osteogenic maturation of MC3T3 cells, while the stiffer, non-contractible scaffolds resulted in lower levels of cell maturation, but higher cell numbers on the scaffold. Therefore, we found scaffold stiffness had different effects on differentiation and cell number whereby the increased cell-mediated contraction facilitated by the less stiff scaffolds positively modulated osteoblast differentiation while reducing cell numbers.

In Vitro Biocompatibility of Sheath–Core Cellulose-Acetate-Based Electrospun Scaffolds Towards Endothelial Cells and Platelets

Typically, tissue-engineered scaffolds mimic the topographical properties of the native extracellular matrix. However, other physical properties, such as the scaffold mechanical stiffness, are not imitated. The purpose of this study was to fabricate scaffolds with improved mechanical properties and investigate their biocompatibility towards endothelial cells and platelets. To enhance mechanical properties, an electrospinning apparatus was developed that fabricates fibers with sheath–core morphologies. Different combinations of cellulose acetate and chitosan were chosen to modulate the mechanical properties of the formed fibers. We hypothesized that mechanically stiffer scaffolds would improve endothelial cell growth and that all scaffolds would be compatible towards endothelial cells and platelets. Endothelial cell-culture conditions were quantified up to 5 days. Migration onto scaffolds was monitored for 10 days. Platelet aggregation, antagonized by thrombin receptor agonist peptide 6, was measured after scaffold incubation. A platelet activation time-course was assessed with the modified prothrombinase assay. As scaffold mechanical stiffness increased, endothelial cell growth within and adhesion to and migration throughout the scaffolds was promoted. Also, scaffolds did not induce platelet aggregation or activation. These results indicate that the mechanical stiffness of engineered scaffolds regulates endothelial cell-culture parameters and that these sheath–core electrospun scaffolds are compatible towards endothelial cells and platelets.

The effect of substrate stiffness on adult neural stem cell behavior

Adult stem cells reside in unique niches that provide vital cues for their survival, self-renewal and differentiation. In order to better understand the contribution of substrate stiffness to neural stem/progenitor cell (NSPC) differentiation and proliferation, a photopolymerizable methacrylamide chitosan (MAC) biomaterial was developed. Photopolymerizable MAC is particularly compelling for the study of the central nervous system stem cell niche because Young's elastic modulus ( E Y) can be tuned from less than 1 kPa to greater than 30 kPa. Additionally, the numerous free amine functional groups enable inclusion of biochemical signaling molecules that, together with the mechanical environment, influence cell behavior. Herein, NSPCs proliferated on MAC substrates with Young's elastic moduli below 10 kPa and exhibited maximal proliferation on 3.5 kPa surfaces. Neuronal differentiation was favored on the softest surfaces with E Y < 1 kPa as confirmed by both immunohistochemistry and qRT-PCR. Oligodendrocyte differentiation was favored on stiffer scaffolds (>7 kPa); however, myelin oligodendrocyte glycoprotein (MOG) gene expression suggested that oligodendrocyte maturation and myelination was best on <1 kPa scaffolds where more mature neurons were present. Astrocyte differentiation was only observed on <1 and 3.5 kPa surfaces and represented less than 2% of the total cell population. This work demonstrates the importance of substrate stiffness to the proliferation and differentiation of adult NSPCs and highlights the importance of mechanical properties to the success of scaffolds designed to engineer central nervous system tissue.

Dendritic Effect on Supramolecular Self-Assembly: Organogels with Strong Fluorescence Emission Induced by Aggregation

A novel class of dumbbell-shaped dendritic molecules with a p-terphenylene core was synthesized, and their self-assembling properties were investigated. The incorporation of bulky dendritic wedges to the central stiff aromatic scaffolds could finely tune their solubility in many organic solvents. Unlike the self-assembly behavior of p-terphenylen-1,4"-ylenebis(dodecanamide), the p-terphenylene cored different generation dendritic molecules could form gels in several kinds of organic solvents through a cooperative effect of the pi-pi stacking, hydrogen-bonding, and van der Waals forces. Interestingly, significant fluorescence enhancement was observed after gelation. Extensive investigations with atomic force microscopy (AFM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), theological measurements, UV-vis absorption spectroscopy, FT-IR spectroscopy, 1H NMR, and X-ray powder diffraction (XRD) revealed that these dendritic molecules self-assembled into elastically interpenetrating one-dimensional nanostructures in organogels.

Influence of Scaffold Stiffness on Subchondral Bone and Subsequent Cartilage Regeneration in an Ovine Model of Osteochondral Defect Healing

Background In osteochondral defects, subchondral bone, as a load-bearing structure, is believed to be important for bone and cartilage regeneration. Hypothesis A stiff scaffold creates better conditions for bone formation and cartilage regeneration than does a softer one. Study Design Controlled laboratory study. Methods Critical osteochondral defects were created in the femoral condyles of 24 sheep. Subchondral bone was reconstructed with a stiff scaffold or a modified softer one, with untreated defects serving as controls. The repair response was evaluated with mechanical, histological, and histomorphometrical techniques at 3 and 6 months postoperatively. Results The elastic modulus of regenerated fibrocartilage over the stiff scaffold tended to be higher than in the soft scaffold group (61 % vs 46% of healthy cartilage) at 3 months. No difference was determined at 6 months; all were well below healthy cartilage. Treated defects showed substantial degradation of the soft scaffold with surrounding sclerotic bone at 3 and 6 months. In contrast, degradation of the stiff scaffold was slower and occurred together with continuous osseous replacement. Conclusion Stiff scaffolds were found to improve bone regeneration. In contrast, soft scaffolds provided less support, and consequently subchondral bone became sclerotic. Although regenerated cartilage formed over the stiff scaffolds at 3 months, and these exhibited better mechanical properties than did the soft scaffold group, the mechanical properties in both treated groups were the same at 6 months, not dissimilar to that of tissue formed in the untreated specimens and inferior to native articular cartilage. Clinical Relevance The results imply that subchondral defect filling in clinical settings advances bone regeneration and should have a comparable stiffness to that of healthy subchondral bone rather than being too flexible. Degradation of resorbable materials and consequently the loss of stiffness may compromise the healing of critical defects.

Force fluctuations and polymerization dynamics of intracellular microtubules

Microtubules are highly dynamic biopolymer filaments involved in a wide variety of biological processes including cell division, migration, and intracellular transport. Microtubules are very rigid and form a stiff structural scaffold that resists deformation. However, despite their rigidity, inside of cells they typically exhibit significant bends on all length scales. Here, we investigate the origin of these bends using a Fourier analysis approach to quantify their length and time dependence. We show that, in cultured animal cells, bending is suppressed by the surrounding elastic cytoskeleton, and even large intracellular forces only cause significant bending fluctuations on short length scales. However, these lateral bending fluctuations also naturally cause fluctuations in the orientation of the microtubule tip. During growth, these tip fluctuations lead to microtubule bends that are frozen-in by the surrounding elastic network. This results in a persistent random walk of the microtubule, with a small apparent persistence length of approximately 30 microm, approximately 100 times smaller than that resulting from thermal fluctuations alone. Thus, large nonthermal forces govern the growth of microtubules and can explain the highly curved shapes observed in the microtubule cytoskeleton of living cells.

A hybrid polymer gel with controlled rates of cross-link rupture and self-repair

A family of hybrid polymer gels is described, in which covalent cross-links create a permanent, stiff scaffold onto which reversible metal-ligand coordinative cross-links are added. The reversible metal-ligand interactions are shown to bear mechanical stress within the hybrid gel, and relaxations in response to that applied stress are consistent with the stress-free kinetics of ligand exchange in systems that model the reversible cross-links. The stress-induced dissociation of a model metal-ligand complex is examined by a single-molecule force spectroscopy, and its mechanical response is compared with a previously studied complex. The mechanical response of the individual interactions is relevant to those found in the family of hybrid gels, and the modular platform is therefore suitable for the study of stress-induced molecular dissociations, and their subsequent repair, within a macroscopic material of fixed structure.

Synthesis and characterization of dendritic multichromophores based on rylene dyes for vectorial transduction of excitation energy.

The synthesis of dendritic multichromophores based on a rigid polyphenylene scaffold is presented. Different rylene chromophores are incorporated into the core, the branches, and the surface of the dendrimer. In this way, two generations of dendritic dyads consisting of a terrylenediimide core, a stiff polyphenylene scaffold, and a perylenemonoimide periphery were obtained. Furthermore, the first synthetic approach to a dendritic triad is introduced. The outer sphere of this macromolecule is formed by naphthalenemonoimide chromophores, whereas perylenemonoimide groups are located in the dendritic scaffold, and the terrylenediimide chromophore serves as a core molecule. This multichromophore absorbs over the whole range of the visible spectrum and shows well-separated absorption envelopes. In the course of dendrimer synthesis new attempts towards a straightforward functionalization strategy for rylene dyes are also presented.

Porous, resorbable, fiber-reinforced scaffolds tailored for articular cartilage repair.

Porous 75:25 poly(D,L-lactide-co-glycolide) scaffolds reinforced with polyglycolide fibers were prepared with mechanical properties tailored for use in articular cartilage repair. Compression testing was performed to investigate the influence of physiological testing conditions, manufacturing method, anisotropic properties due to predominant fiber orientation, amounts of fiber reinforcement (0 to 20 wt, %), and viscoelasticity via a range of strain rates. Using the same testing modality, the mechanical properties of the scaffolds were compared with pig and goat articular cartilage. Results showed that mechanical properties of the scaffolds under physiological conditions (aqueous, 37 degrees C) were much lower than when tested under ambient conditions. The manufacturing method and anisotropy of the scaffolds significantly influenced the mechanical properties. The compressive modulus and yield strength proportionally increased with increasing fiber reinforcement up to 20%. From 0.01 to 10 mm/mm/min strain rate, the compressive modulus increased in a logarithmic fashion, and the yield strength increased in a semi-log fashion. The compressive modulus of the non-reinforced scaffolds was most similar to the pig and goat articular cartilage when compared using similar testing conditions and modality, but the improvement in yield strength using the stiffer scaffolds with fiber reinforcement could provide needed structural support for in vivo loads.