Renal artery access might not always be achieved due to anatomical reasons during the deployment of a branched stent graft in thoracoabdominal or juxtarenal abdominal aortic aneurysms. Renal perfusion is maintained through the aneurysm sac until the iliac limbs are deployed. To preserve renal perfusion, a branched iliac limb would be needed. Such limbs with a side branch, a narrow (12-14 mm) proximal end, and a wide (16-20 mm) distal end are not commercially available. Due to the nature of their deployment mechanism, Gore Excluder distal limbs (W.L. Gore & Associates) have been used outside the instructions for use in reversed position. A traditional Gore Excluder main body can be reversed; however, the smallest proximal diameter is 23 mm, which could be too large to be deployed in a typically 16- to 18-mm common iliac artery. However, the smallest Gore Excluder Conformable endoprosthesis (W.L. Gore & Associates, Inc) main body is 20 mm in diameter, and the distal limb is 14.5 mm. This allows for a perfect fit when deployed in reversed position between an 11-mm unibody limb (Cook Medical Inc) and the common iliac artery, resulting in access to the renal artery from the side branch. We used a Gore Excluder Conformable main body graft in two such cases successfully. In these two patients, the iliac limbs and renal artery have stayed patent during a follow-up of 24 and 3 months. A Gore Excluder Conformable graft can be deployed in reversed position, using it as a conduit between the branched stent graft limb, common iliac artery, and renal artery.