Stable Fracture Fixation Research Articles

Long-term surgical outcomes of open reduction and internal fixation (ORIF) in patients with Hoffa-like tibial plateau fractures: a clinical study and analysis.

The Hoffa-like tibial plateau fracture is a rare intra-articular fracture and few studies have investigated its curative effect after treatment. We aimed to focus on patients with Hoffa-like tibial plateau fractures based on a large sample population and to evaluate their long-term surgical outcomes treated with open reduction and internal fixation (ORIF). Between August 2017 and September 2020, a period in which 3256 tibial plateau fractures were treated in five trauma centres. Among them, patients with Hoffa-like tibial plateau fractures who treated with ORIF were retrospectively reviewed. Baseline characteristics, operative information, imaging findings, functional scores and any complications were accurately recorded. Each patient was followed for at least three years. Hoffa-like tibial plateau fractures account for approximately 0.9% (29/3256) of all tibial plateau fractures, including 19 males and ten females with a mean age of 45.8 years. After surgery, all patients obtained anatomical reduction of the fractures and none experienced reduction loss. The final Hospital for Special Surgery score (HSS) was improved compared to one year postoperatively (92.76 ± 3.52 versus 89.03 ± 3.81, P < 0.01). No significant differences (P > 0.05) were found in VAS pain score, Rasmussen score, tibial plateau angle (TPA), and posterior slope angle (PSA) between one year and final follow-up. No serious postoperative complications occurred during the treatment and follow-up. Long-term follow-up results showed that patients with Hoffa-like tibial plateau fractures can achieve stable fracture fixation, low postoperative complications, excellent radiographic findings and good functional recovery with ORIF.

Study on the efficacy of 3D printing technology combined with customized plates for the treatment of complex tibial plateau fractures

BackgroundAnatomical reduction and stable fixation of complex tibial plateau fractures remain challenging in clinical practice. This study examines the efficacy of using 3D printing technology combined with customized plates for treating these fractures.MethodsWe retrospectively analyzed 22 patients treated with 3D printing and customized plates at the Orthopedic Department of the Central Hospital affiliated with Shenyang Medical College from September 2020 to January 2023. These patients were matched with 22 patients treated with traditional plates with similar baseline characteristics. Patients were divided into an experimental group (3D-printed models and customized plates) and a control group (traditional plates). The control group underwent traditional surgical methods, while the experimental group had a preoperative 3D model and customized plates for surgical planning. We compared baseline characteristics and recorded various indicators, including preoperative preparation time, surgical time, intraoperative blood loss, number of intraoperative fluoroscopies, hospital stay duration, fracture healing time, complications, knee joint range of motion (ROM), Rasmussen anatomical and functional scores, and HSS scores.ResultsAll surgeries were successful with effective follow-up. The experimental group had shorter surgical time, less intraoperative blood loss, and fewer intraoperative fluoroscopies (P < 0.05). At 6 months and 1 year postoperatively, the experimental group had better knee joint HSS scores than the control group. Preoperative preparation time and total hospital stay were shorter in the control group (P < 0.05). There were no significant differences in fracture healing time and follow-up duration between groups. The experimental group showed better knee joint flexion angles (P < 0.05). Rasmussen scores showed no statistical difference between groups (P > 0.05). The incidence of complications was slightly lower in the experimental group but not significantly different.Conclusion3D printing technology combined with customized plates for complex tibial plateau fractures enables precise articular surface reduction, significantly shortens surgical time, and reduces intraoperative blood loss. This method improves knee joint function, offering a more effective treatment option.

Research Progress on the Treatment of Geriatric Intertrochanteric Femur Fractures with Proximal Femur Bionic Nails (PFBNs).

Intertrochanteric femur fracture is the most common hip fracture in elderly people, and the academic community has reached a consensus that early surgery is imperative. Proximal femoral nail anti-rotation (PFNA) and InterTan are the preferred internal fixation devices for intertrochanteric femur fractures in elderly individuals due to their advantages, such as a short lever arm, minimal stress shielding, and resistance to rotation. However, PFNA is associated with complications such as nail back-out and helical blade cut-out due to stress concentration. As a new internal fixation device for intertrochanteric femur fractures, the proximal femoral biodegradable nail (PFBN) addresses the issue of nail back-out and offers more stable fracture fixation, a shorter lever arm, and stress distribution compared to PFNA and InterTan. Clinical studies have shown that compared to PFNA, PFBNs lead to faster recovery of hip joint function, shorter non-weight-bearing time, and faster fracture healing. This article provides a literature review of the structural characteristics, biomechanical analysis, and clinical studies of PFBNs, aiming to provide a theoretical basis for the selection of internal fixation devices for the treatment of intertrochanteric femur fractures in elderly patients and to improve the quality of life of patients during the postoperative period.

Biomechanical assessment of mandibular fracture fixation using finite element analysis validated by polymeric mandible mechanical testing

The clinical finite element analysis (FEA) application in maxillofacial surgery for mandibular fracture is limited due to the lack of a validated FEA model. Therefore, this study aims to develop a validated FEA model for mandibular fracture treatment, by assessing non-comminuted mandibular fracture fixation. FEA models were created for mandibles with single simple symphysis, parasymphysis, and angle fractures; fixated with 2.0 mm 4-hole titanium miniplates located at three different configurations with clinically known differences in stability, namely: superior border, inferior border, and two plate combinations. The FEA models were validated with series of Synbone polymeric mandible mechanical testing (PMMT) using a mechanical test bench with an identical test set-up. The first outcome was that the current understanding of stable simple mandibular fracture fixation was reproducible in both the FEA and PMMT. Optimal fracture stability was achieved with the two plate combination, followed by superior border, and then inferior border plating. Second, the FEA and the PMMT findings were consistent and comparable (a total displacement difference of 1.13 mm). In conclusion, the FEA and the PMMT outcomes were similar, and hence suitable for simple mandibular fracture treatment analyses. The FEA model can possibly be applied for non-routine complex mandibular fracture management.

Finite element analysis of modified Slongo's external fixation in the treatment of supracondylar humeral fractures in older children.

Older children over 8 years old are at higher risk of elbow joint stiffness after treatment of supracondylar humeral fractures. The objective of this study was to improve the Slongo's external fixation system for treating supracondylar humeral fractures in older children. This would be achieved by increasing fixation strength and providing a theoretical basis through finite element analysis and mechanical testing. A 13-year-old female patient with a history of previous fracture was selected for CT data processing to create a three-dimensional model of the distal humerus fracture. Two internal fixation models were established, using the Slongo's external fixation method with Kirschner wire (Group A) and modifying the Slongo's external fixation (Kirschner wire tail fixation) (Group B). The fracture models were then subjected to mechanical loading analysis using Finite Element Analysis Abaqus 6.14 software to simulate separation, internal rotation, and torsion loads. A PVC humeral bone model was used to create a supracondylar fracture model, and the A and B internal fixation methods were applied separately. The anterior-posterior and torsional stresses were measured using the Bose Electroforce3510 testing system, followed by a comparative analysis. The finite element simulation results showed that under the same tensile, torsion, and inversion forces, the osteotomy model fixed with Kirschner wire at the distal end in Group B exhibited smaller tensile stress and deformation compared to the unfixed osteotomy model in Group A. This indicated that the fixation strength of Group B was superior to that of Group A. According to the test results of the Bose Electroforce3510 testing system, a simple linear regression analysis was conducted using SPSS software. The K values of rotation angle-torque tests and front and rear displacement-stress tests were calculated for Groups A and B, with Group B showing higher values than Group A. The results of this study supported the significantly enhanced biomechanical reliability and stability of fracture fixation in Group B, which utilized the modified Slongo's external fixation (Kirschner wire tail fixation). This optimized method provides a new choice for the clinical treatment of supracondylar humeral fractures in older children, backed by both clinical evidence and theoretical basis.

The Clinical Application of Double Taylor Spatial Frame in Segmental Tibial Fracture.

Multi-planar external fixation has been used for the management of segmental tibial fractures with severe soft tissue injuries. However, fewer specialized studies have been reported. The primary aim of this study was to describe our experience of treating fractures of this type using the Taylor Spatial Frame and Ilizarov external fixation methods. We retrospectively analyzed 33 patients with segmental tibial fracture treated at our institution between January 2016 and December 2020. The patients were divided into double Taylor Spatial Frame (D-TSF) and Ilizarov groups based on the external fixation structure. Baseline demographic data included sex, age, injury side and cause, open or closed fracture, time from injury to surgery, complications, and external frame removal and fracture healing time. The hip-knee-ankle angle (HKA) was measured from preoperative, immediate postoperative, and final follow-up full-length X-rays of bilateral lower limbs. We determined the degree of deviation in the HKA by calculating the difference between the measured angle and the ideal value of 180°; the absolute value was used to assess recovery of the lower limb force line. At the final follow-up, Johner-Wruhs tibial fracture outcome criteria (J-W TFOC) were used to classify the postoperative function of the affected limb as excellent, good, moderate, or poor. Count data were analyzed with the chi-square test or Fisher's exact test; the Mann-Whitney U test was used for rank data. No statistically significant differences were observed between the two groups in terms of sex, age, side of injury, cause of injury, closed or open fracture, or time between injury and surgery, which indicates that the groups were comparable (p > 0.05). A statistically significant difference was observed in external frame removal and fracture healing time between the D-TSF and Ilizarov groups (36.24 ± 8.34 vs 45.42 ± 10.21 weeks, p = 0.009; 33.33 ± 8.21 vs 42.00 ± 9.78 weeks, p = 0.011). The Johner-Wruhs criteria were used to assess the function of the affected limb, the D-TSF group performed better in correcting the lower limb force line than the Ilizarov group. A statistically significant difference in terms of excellent ratings was observed between the two groups (18/2/1/0 vs 5/5/1/1, p = 0.010). Postoperative follow-up X-rays demonstrated a significant improvement in the HKA in both groups immediately after surgery and at the final follow-up compared to the angle before surgery. At the final follow-up, a statistically significant difference was observed in the degree of deviation in the HKA between the two groups (1.58° ± 0.84° vs 2.37° ± 1.00°, p = 0.023). The D-TSF treatment is associated with minimal secondary damage to soft tissue, a straightforward and minimally invasive procedure, multiplanar stable fracture fixation, and optimization of fracture alignment and lower limb force lines, therefore, it is highly effective therapeutic option for segmental tibial fracture.

Effect of structural support size and position on depressed tibial plateau fractures: A finite element analysis

ObjectiveStructural support for depressed tibial plateau fractures is receiving increasing attention. Currently, there has been little biomechanical evaluation of structural support. This work aimed to investigate the effect of structural support size and position on fracture fixation stability. MethodsA split-depressed tibial plateau fracture model was created according to the fracture map. Cortical screws combined with structural filler were used for fracture fixation. The filler diameter was set to small, medium and large, and the filler position was set to the center and offset by 1, 2 and 3 mm to study the effect of position and size on stability. ResultsThe maximum stress on the implant in all scenarios occurs at the lower contact surface between the anterior screw and the filler. Increased support size resulted in increased mean maximum screw stress, depressed fragment axial displacement and separated fragment transverse displacement (screw stress: 266.6 ± 37.7 MPa vs. 266.7 ± 51.0 MPa vs. 273.8 ± 41.5 MPa; depressed displacement: 0.123 ± 0.036 mm vs. 0.133 ± 0.049 mm vs. 0.158 ± 0.050 mm; separated displacement: 0.402 ± 0.031 mm VS 0.412 ± 0.047 mm VS 0.437 ± 0.049 mm). The larger the offset of the support position was, the larger the peak screw stress and the larger the reduction loss of depressed and separated fragment reduction, regardless of the support size. The medium support combined with the central position presented the minimum of peak stress and reduction loss. Cortical bone was below 2 % and trabecular strain was below 10 % for all scenarios. ConclusionCentral placement of structural support provides superior stability for the treatment of depressed tibial plateau fractures compared to the eccentric placement. When a support is placed centrally, optimal stability is achieved when the diameter matches the diameter of the depressed region. Thus, the utilization of equal-diameter fillers to provide central support appears to be an ideal selection for depressed tibial plateau fractures.

Intramedullary nailing for irreducible spiral subtrochanteric fractures: A comparison of cerclage and non-cerclage wiring

PurposeIntramedullary nailing is the preferred internal fixation technique for the treatment of subtrochanteric fractures because of its biomechanical advantages. However, no definitive conclusion has been reached regarding whether combined cable cerclage is required during intramedullary nailing treatment. This study is performed to compare the clinical effects of intramedullary nailing with cerclage and non-cerclage wiring in the treatment of irreducible spiral subtrochanteric fractures. MethodsPatients with subtrochanteric fractures admitted to our center from January 2013 to December 2021 were retrospectively analyzed. The patients were enrolled in the case-control study according to the inclusion and exclusion criteria and divided into the non-cerclage group and the cerclage group. The patients' clinical data, including the operative time, intraoperative blood loss, hospital stay, reoperation rate, fracture union time, and Harris hip score, were compared between these 2 groups. Categorical variables were compared using Chi-square or Fisher's exact test. Continuous variables with normal distribution were presented as mean ± standard deviation and analyzed with Student's t-test. Non-normally distributed variables were expressed as median (Q1, Q3) and assessed using the Mann-Whitney test. A p < 0.05 was considered significant. ResultsIn total, 69 patients were included in the study (35 patients in the non-cerclage group and 34 patients in the cerclage group). The baseline data of the 2 groups were comparable. There were no significant difference in the length of hospital stay (z = -0.391, p = 0.696), operative time (z = -1.289, p = 0.197), or intraoperative blood loss (z = -1.321, p = 0.186). However, compared with non-cerclage group, the fracture union time was shorter (z = -5.587, p < 0.001), the rate of nonunion was lower (χ2 = 6.030, p = 0.03), the anatomical reduction rate was higher (χ2 = 5.449, p = 0.03), and the Harris hip score was higher (z = -2.99, p = 0.003) in the cerclage group, all with statistically significant differences. ConclusionsIntramedullary nailing combined with cable cerclage wiring is a safe and reliable technique for the treatment of irreducible subtrochanteric fractures. This technique can improve the reduction effect, increase the stability of fracture fixation, shorten the fracture union time, reduce the occurrence of nonunion, and contribute to the recovery of hip joint function.

Treatment options and outcomes for delayed scapular anatomical neck fractures: a case report and review of the literature

IntroductionScapular anatomical neck fractures are among the most infrequent shoulder girdle fractures. Only seven radiologically confirmed cases of scapular anatomical neck fractures have been documented in the literature to date, of which only one case underwent delayed surgery.Case presentationA 34-year-old male Persian patient with morbid obesity was diagnosed with a scapula anatomical neck fracture after a motor vehicle collision. The radiographic assessment of the patient indicated an increase in the scapular glenopolar angle (73.9°). Due to concurrent chest and head injuries, surgical intervention was deferred until 6 weeks following the injury. The posterolateral limited Dupont–Evrard approach was used because of the patient’s extremely high body mass index. Two plates were utilized to achieve stable fixation of the glenoid neck fracture. Following a 1 year follow-up period, complete fracture union was successfully attained, resulting in a constant score of 79.ConclusionsThe most accurate radiographic indicators of these fractures are a superior fracture line located laterally to the coracoid process, a small inferior spike, and an elevated glenopolar angle. The only tendon attached to the glenoid is the long head of the triceps, making these fractures unstable; therefore, surgery is required in the majority of instances. The small size of the fractured component makes stabilization more difficult. Overall, anatomical scapular neck fractures are extremely uncommon and distinguished from other scapular fractures by their unique radiological and biomechanical characteristics. This case highlights the challenges encountered when managing scapular fractures in patients with morbid obesity. The delayed surgical intervention and the choice of surgical approach tailored to the patient’s specific anatomical and physiological considerations proved to be effective in achieving a favorable outcome.

Utility of the LeFort I Osteotomy in the Acute Management of Midface Trauma

Purpose: Pure and isolated LeFort I, II, and III fractures are rare. Typically, they occur at different levels on each side and may be incomplete in nature, which complicates management. The LeFort I osteotomy is a well-described technique in elective management of midface deformities. However, there is minimal literature on its use in acute trauma. This study describes the use of the LeFort I osteotomy as a surgical maneuver to aid in the reduction of complex midface fractures and the re-establishment of premorbid occlusion. Methods: A retrospective review was performed of all consecutive midface fractures managed at our center from 2008 to 2020. The inclusion criteria were adult patients who had a LeFort I osteotomy in the setting of acute fracture management. Primary outcomes were the long-term stability of fracture fixation and the re-establishment of stable, reproducible occlusion at follow-up. Results: Twenty-two cases met the criteria for inclusion. The most common indication was contralateral LeFort I and ipsilateral incomplete or absent LeFort I (50%). Most remaining cases had a high LeFort (II or III) on the ipsilateral side and a high LeFort I on the contralateral side (41%). There was one case of nonunion requiring revision and bone grafting. In all remaining cases who presented for follow-up at an average of 1.5 years, stable, reproducible occlusion was achieved. Conclusions: In acute trauma, a LeFort I osteotomy is a safe and effective technique to re-establish premorbid occlusion when passive reduction of the maxilla cannot be achieved. This technique can be safely added to the armamentarium of any surgeon who manages acute craniofacial trauma.

Intramedullary implant stability affects patterns of fracture healing in mice with morphologically different bone phenotypes

Almost all prior mouse fracture healing models have used needles or K-wires for fixation, unwittingly providing inadequate mechanical stability during the healing process. Our contention is that the reported outcomes have predominantly reflected this instability, rather than the impact of diverse biological conditions, pharmacologic interventions, exogenous growth factors, or genetic considerations. This important issue becomes obvious upon a critical review of the literature. Therefore, the primary aim of this study was to demonstrate the significance of mouse-specific implants designed to provide both axial and torsional stability (Screw and IM Nail) compared to conventional pins (Needle and K-wires), even when used in mice with differently sized marrow canals and diverse genetic backgrounds. B6 (large medullary canal), DBA, and C3H (smaller medullary canals) mice were employed, all of which have different bone morphologies. Closed femoral fractures were created and stabilized with intramedullary implants that provide different mechanical conditions during the healing process. The most important finding of this study was that appropriately designed mouse-specific implants, providing both axial and torsional stability, had the greatest influence on bone healing outcomes regardless of the different bone morphologies encountered. For instance, unstable implants in the B6 strain (largest medullary canal) resulted in significantly greater callus, with a fracture region mainly comprising trabecular bone along with the presence of cartilage 28 days after surgery. The DBA and C3H strains (with smaller medullary canals) instead formed significantly less callus, and only had a small amount of intracortical trabeculation remaining. Moreover, with more stable fracture fixation a higher BV/TV was observed and cortices were largely restored to their original dimensions and structure, indicating an accelerated healing and remodeling process. These observations reveal that the diaphyseal cortical thickness, influenced by the genetic background of each strain, played a pivotal role in determining the amount of bone formation in response to the fracture. These findings are highly important, indicating the rate and type of tissue formed is a direct result of mechanical instability, and this most likely would mask the true contribution of the tested genes, genetic backgrounds, or various therapeutic agents administered during the bone healing process.

Outcomes of Odontoid Process Fracture Surgery

Background. Odontoid fractures are found in two age groups. In younger patients, they occur following traffic accidents, falls from a height and during sports. In older patients with poor bone quality, they are usually caused by falls from one’s own height. Most fractures are stable and do not require surgical treatment. Unstable, severely displaced fractures with neurological deficits require surgical treatment. The aim of the study was to evaluate the surgical and functional outcomes of treatment of odontoid fractures with a cannulated screw. Materials and methods. The study enrolled 20 patients that underwent surgery in the years 2020-2022. The patients were divided into two groups: below 60 (group A) and over 60 years of age (group B). Patients were assessed at one day pre-op, one day post-op, 6 weeks following surgery and 3 months following surgery. Imaging studies were performed to assess the angulation and degree of displacement of bone fragments. After the fracture was surgically fixed with a cannulated screw, bone union and the stability of fracture fixation were assessed. Preoperative and postoperative pain intensity as per a VAS, functional status assessed with the NDI questionnaire, quality of life (EQ-VAS) and neurological status (ASIA scale) were compared. Results. Good functional and surgical results were obtained in both groups of patients. Performance and quality of life improved, while pain intensity decreased in all patients. In 3 patients with post-traumatic paresis, the dysfunctions gradually subsided. No general medical or perioperative complications were observed. Bone union of the fracture was achieved in 40% of patients in group B and in 80% in group A. Achieving union did not determine the functional status of patients. On functional radiographs, all places of fixation were stable. Conclusions. 1. Odontoid fracture fixation with a single cannulated screw is a safe method of treatment. It provided a high union rate and good stability of the fracture. 2. Fracture non-union was noted more often in the group of older patients, but it did not negatively impact quality of life and performance.

Results of Antibiotic-Impregnated Cement/Polymer-Coated Intramedullary Nails in the Management of Infected Nonunion and Open Fractures of Long Bones.

Background Fractures of long bones can sometimes lead to complications such as infection or nonunion, resulting in significant patient morbidity. Surgical intervention and antibiotics are often necessary to treat these complications. Antibiotic-impregnated cement/polymer-coated intramedullary nails have emerged as an effective surgical treatment for infected nonunion and open fractures. These implants elude high concentrations of antibiotics at the infection site while stabilizing the fracture. Extensive research has shown promising results, with success rates ranging from 60% to 100%. Benefits of these implants include stable fracture fixation, early weight-bearing, and reduced need for prolonged antibiotic therapy. However, concerns remain regarding antibiotic resistance and potential toxicity. This study aims to evaluate the efficacy and safety of these implants in managing infected nonunion and open fractures of the femur and tibia. Methods This prospective hospital-based study aimed to assess the efficacy and safety of antibiotic-impregnated cement/polymer-coated intramedullary nails for managing infected nonunion and open fractures of the femur and tibia. The study included patients aged 18 or older who received treatment with these implants between January 1, 2021 and December 31, 2022. Patients allergic to vancomycin or teicoplanin, with gap nonunion >2 cm, or lost to follow-up were excluded. Data on demographics, fracture details, previous treatment, surgery, antibiotics, and outcomes were collected using a structured proforma. Surgeries involved implant removal, debridement, culture testing, reaming, fracture reduction, and stabilization with an antibiotic-impregnated cement/polymer-coated intramedullary nail. Postoperatively, patients received antibiotics, had wound inspections, and were gradually allowed weight-bearing. Follow-up appointments and radiographic/laboratory assessments were conducted at regular intervals. The primary outcome was successful bone union, and secondary outcomes included time to union, infection rate, nonunion rate, and revision surgery. Results The majority of participants were male, with a mean age of 39.76 years. Most fractures were Gustilo-Anderson grade 3 (46.7%) and involved the tibia (73.3%). The mean bone gap after debridement was 1.3 cm. The median follow-up period was 8.21 months. Infection was controlled in 93.3% of patients, with the tibia being the most common site (70.0%). Successful bone union was achieved in 90.0% of patients, with a mean union rate of 22.13 weeks for tibial fractures and 17.21 weeks for femoral fractures. Among patients with bone union, 60.0% did not require additional procedures. Most patients had excellent bony (76.7%) and functional (70.0%) outcomes. The most common complications were the persistence of bone nonunion, impingement of proximal nail, and debonding of nail cement, each occurring in 10.0% of patients. Conclusion The study concluded that antibiotic-impregnated cement/polymer-coated intramedullary nails are effective in managing infected nonunion and open fractures of the femur and tibia. The procedure demonstrated a high success rate in controlling infections (93.3%) and achieving bone union (90.0%). Paley's criteria showed excellent bony and functional outcomes in the majority of patients. These findings support the use of this treatment option for such fractures.

Biomechanical analysis of internal fixation system stability for tibial plateau fractures.

Background: Complex bone plateau fractures have been treated with bilateral plate fixation, but previous research has overemphasized evaluating the effects of internal fixation design, plate position, and screw orientation on fracture fixation stability, neglecting the internal fixation system's biomechanical properties in postoperative rehabilitation exercises. This study aimed to investigate the mechanical properties of tibial plateau fractures after internal fixation, explore the biomechanical mechanism of the interaction between internal fixation and bone, and make suggestions for early postoperative rehabilitation and postoperative weight-bearing rehabilitation. Methods: By establishing the postoperative tibia model, the standing, walking and running conditions were simulated under three axial loads of 500N, 1000N, and 1500N. Accordingly, finite element analysis (FEA) was performed to analyze the model stiffness, displacement of fractured bone fragments, titanium alloy plate, screw stress distribution, and fatigue properties of the tibia and the internal fixation system under various conditions. Results: The stiffness of the model increased significantly after internal fixation. The anteromedial plate was the most stressed, followed by the posteromedial plate. The screws at the distal end of the lateral plate, the screws at the anteromedial plate platform and the screws at the distal end of the posteromedial plate are under greater stress, but at a safe stress level. The relative displacement of the two medial condylar fracture fragments varied from 0.002-0.072mm. Fatigue damage does not occur in the internal fixation system. Fatigue injuries develop in the tibia when subjected to cyclic loading, especially when running. Conclusion: The results of this study indicate that the internal fixation system tolerates some of the body's typical actions and may sustain all or part of the weight early in the postoperative period. In other words, early rehabilitative exercise is recommended, but avoid strenuous exercise such as running.

Preoperative estimation of humerus intramedullary nail length using clinical landmarks

PurposeIntramedullary interlocking nailing is one of the accepted methods of treating humerus diaphyseal fractures. Appropriate nail length and diameter are of paramount importance to achieve a stable fracture fixation. Estimating the nail length can be as challenging in certain cases as it is important. This study aims to provide an easy-to-use formula utilizing clinical measurements from contra lateral arm to accurately estimate humeral nail length. MethodsThis descriptive cross-sectional study was conducted at 3 tertiary care hospitals in Mangalore, India. Patients above the age of 18 years coming to the outpatient department with elbow, shoulder or arm complaints requiring radiological investigation from July 2021 to July 2022 were included. Patients with fractures or dislocations of upper limbs, malunited or non-united fractures of upper limbs, congenital or developmental deformities and patients with open growth plates were excluded. Patients’ variables (like age and gender), radiological humerus length and contralateral arm clinical measurements were recorded. An independent samples t-test was used for univariate analysis, and linear regression analysis was done to estimate the desired nail length using the clinical measurement of the humerus (cm) in both genders separately. The significance level was set at p < 0.05. ResultsOur study included 204 participants of which 108 were male and 96 were female. The formula for predicting humeral nail length in males is (−2.029) + (0.883 × clinical measurement). The formula for females is 1.862 + (0.741 × clinical measurement). A simplified formula to determine humeral nail length is 0.9 clinical length – 2 cm (in males) and 0.7 × clinical length + 2 cm (in females). ConclusionTo improve the stability of fixation with intramedullary nails it is imperative to select the appropriate nail length. There have been studies that devised reliable methods of determining nail lengths in the tibia and femur using preoperative clinical measurements. A similar clinical method of determining humeral nail length is lacking in the literature. Our study was able to correlate radiological lengths of the humerus medullary canal with clinical measurements performed using anatomical landmarks to arrive at a formula. This allows for a reliable and easy nail length determination preoperatively.

Functional Outcome of Internal Fixation (INFIX) in Anterior Pelvic Ring Fractures.

Introduction Pelvic injuries account for 2% of all orthopedic admissions and are associated with high mortality rates. They need a stable fixation and not an anatomical fixation. Hence, the role of internal fixation (INFIX) comes into play, which provides a stable internal fixation without the complication of open reduction and external fixation with plates and screws. Materials and methodology Thirty-one patients with unstable pelvic ring injuries coming to a tertiary care hospital in the state of Maharashtra, India, were selected retrospectively. They wereoperated on with INFIX. Patients were followed up for a period of six months and evaluated according to the Majeed score. Results There was a significant functional outcome in patients operated on with INFIX in pelvic ring injuries in terms of the ability to sit, stand, rejoin work, take part in sexual intercourse, and bear pain. An average Majeed score of 78 with signs of a stable bony union by six months and a full range of motion was noticed in most patients with no problems in day-to-day work. Conclusion INFIX provides stable internal fixation of pelvic fractures with good functional outcome without the disadvantages of external fixation or open reduction with plates.

The Use of Montage Bone Putty in Assisting in the Maintenance of Reduction in Comminuted Distal Radius Fractures.

Background The distal radius fracture is the most common fracture in the United States. Achieving stable reduction and fixation of complex fracture patterns can be challenging. In order to help maintain reduction of comminuted fracture to simplify plating, the calcium phosphate-based bone putty Montage has been developed. Questions/Purposes Does Montage assist in achieving stable reduction and fixation of complex distal radius fractures with an acceptable complication profile? Patient and Methods We retrospectively analyzed all patients who were treated intraoperatively with Montage bone putty along with volar plate fixation at a large-volume urban county hospital. Preoperative, intraoperative, and postoperative measurements of radiographic features were recorded at 2 and 6 months, as were any complications. Statistical analysis was then performed on these values. Results Preoperative and postoperative radiographs demonstrated significant improvement in standard distal radius fracture measurements, reflecting adequate reduction with the use of Montage intraoperatively. Critically, radiographs demonstrated maintenance of reduction compared to intraoperative fluoroscopy images at 2 months, showing short-term stability of the use of Montage in these fracture patterns as well as long-term stability at 6 months in a subset of patients. There were no major complications in this study. Conclusion In this study, we demonstrate the utility of Montage bone putty for complex distal radius fractures with short-term follow-up and limited long-term follow-up. This initial study underlines its efficacy in maintaining reduction without major complications. Level of Evidence IV, Therapeutic.

Bone cemented K-wire fixation versus elastic stable intramedullary nailing fixation of paediatric proximal humerus fractures: A prospective cohort study.

The objective of this study is to compare the treatments of pediatric displaced proximal humerus fractures with external-fixation technique using the combination of K-wires and bone-cement versus close reduction and internal fixation technique using elastic stable intramedullary nail. From April 2016 to March 2020, 72 children with proximal humeral fractures were allocated to group A and 44 children with proximal humeral fractures were allocated to group B. Patients in group A were treated with bone-cemented K-wire fixation, and patients in group B were treated with elastic stable intramedullary nailing. The function of the upper limb was assessed using the Shortened Version of the Disabilities of the Arm, Shoulder and Hand questionnaire and Neer score. Patient satisfaction was assessed using the 10-cm visual analogue scale. Bone healing was achieved in group A and B after a mean time of 6.1 ± 1.2 and 6.4 ± 1.1 weeks, respectively. The mean surgical time of groups was 33 ± 9 and 54 ± 12 minutes, respectively. The mean Quick Disabilities of the Arm, Shoulder and Hand questionnaire score of groups were 0.5 ± 1.4 and 0.7 ± 1.5, respectively. Based on Neer score, we obtained 69 excellent and 3 good results in group A, and 41 excellent and 3 good results in group B. There were significant differences regarding duration of operation, cost of treatment, and postoperative angle at bone healing (P < .05). The external cemented K-wire fixation is a useful and reliable alternative technique for the treatment of severely displaced proximal humerus fractures in children. The technique is a minimally invasive procedure with minimal complications.

Hybrid Fixation of Failed Internally Fixed Distal Femoral Fracture with an Extramedullary Locking Plate and an Intramedullary Cortical Strut Allograft Construct- A Case Report

Abstract Introduction: Fractures in osteoporotic bones present a surgical challenge for fixation and are often associated with significant morbidity. Case presentation: We present a case of failed internal fixation of fracture femoral shaft in a 74-year-old patient with osteoporosis. Fracture fixation was undertaken using an extra medullary locking plate and an intramedullary cortical strut graft, a hybrid fixation technique, a Locking Plate Allograft Construct. Discussion: Bone grafts are often used to support the native bone. By using a hybrid technique, the locking plate allograft construct achieves an enhanced stability of fracture fixation compared to plate alone, thus improving the outcome of surgery in osteoporotic bone fractures. Conclusion: Hybrid fixation using locking plate allograft constructs are relatively easy to perform and provide superior fixation to routine methods in osteoporotic bone fractures.

Results of Anterior Cruciate Ligament Avulsion Fracture by Treatment Using Bioabsorbable Nails in Children and Adolescents.

(1) Background: Anterior cruciate ligament avulsion fractures are characteristic for skeletally immature patients, and appropriate treatment is currently debated in the literature. The study aimed to evaluate the clinical and functional outcomes in patients with tibial eminence fractures treated with bioabsorbable nails in one orthopedic clinic. (2) Methods: After retrospective evaluation, we found 17 patients with tibial eminence fractures treated in orthopedic departments between January 2013 and July 2022 using bioabsorbable fixation nails. The study group comprised 12 boys and five girls aged 5 to 15.2 (average 10.1). The mean follow-up was 28 months. We diagnosed five type II fractures, ten type III fractures, and two type IV fractures according to Meyers-McKeever classification. (3) Results: We obtained a high healing rate-17 patients with the complete union on the control radiographs. We diagnosed two cases of malunion, of which one required revision surgery. Only one patient showed a slight anterior knee laxity. The treatment effect at follow-up was assessed using the Lysholm Knee Score and IKDC Score. The median Lysholm Score was 96.64 (SD 4.54), and the median IKDC Score was 84.64 (SD 3.10), which were both excellent results. (4) Conclusions: Based on our results, surgery using bioabsorbable devices for type II, III, and IV tibial eminence fractures in young individuals is an effective alternative, allowing good outcomes and restoring proper knee stability. The crucial factor for a good effect is a stable fracture fixation. Arthroscopic surgery gives good outcomes with minimal invasion. It is important not to prolong the attempts of arthroscopic reduction and to perform the open reduction to shorten the procedure's time and avoid complications.