Spacecraft Communication Systems Research Articles

Mathematical modeling of cross-corrugated waveguide shell formation

Flexible cross-corrugated shells are used to create flexible waveguides that connect rigid waveguides. They compensate for mounting stresses during assembly, provide temperature compensation and vibration damping. These waveguides are widely used in spacecraft communication systems, they are required – flexibility, mechanical strength, geometric accuracy and minimal energy loss when connected to the transmission line. In this paper, the process of corrugating rectangular profile pipes made of BrB 2 bronze to create transversely corrugated shells is investigated. Objectives of the work: 1) analysis of technological processes of corrugation of waveguide pipes to select the most accurate method; 2) conducting a numerical experiment to determine technological parameters. Based on the analysis of the methods of transverse corrugation, the most rational method of corrugation with a liquid punch on a solid matrix has been incorporated. The scientific novelty lies in the creation of a mathematical model based on the theory of bending moments and beam stretching. With its help, a mathematical experiment was carried out, which has an applied benefit for the calculations of technological operations, for the corrugation of a waveguide. The pressures necessary for corrugation for different corrugation geometries are found and patterns are revealed. The mathematical model has an applied use for preliminary calculations of technological operations of corrugation of rectangular pipes. The calculation allows you to choose the most optimal mode of the technological process: fluid pressure, deformation, change in yield strength, allowing you to produce a flexible waveguide qualitatively. The result of the calculations is useful in preliminary design to determine the size of the corrugating equipment and the effort required to implement the technological process of forming the corrugations of rectangular pipes.

Effect of Plasma Sheath Covering Spacecraft-Borne Array Antenna on Direction-of-Arrival Estimation

During the reentry process of a spacecraft, a plasma sheath will attenuate and distort the amplitude and phase of the transmitting electromagnetic (EM) waves, influencing signal reception and measurement accuracy of the direction of wave arrival of the spacecraft-borne array antenna, by which the spacecraft communication and guidance system may be affected. To solve this problem, based on the space distribution characteristics of plasma sheath flow field, an EM simulation model of an array antenna under plasma sheath is established, and EM simulations related to field propagation across plasma sheath and radome are performed. Then, the array signal model is constructed by extracting the field strength data at the array element. Several spatial spectrum estimation methods are conducted to calculate the direction of arrival of an EM wave incident on the array antenna. By comparing the direction of the incoming wave in free space with the estimated direction after propagating through the plasma sheath, the direction-finding error of the spacecraft-borne array under the plasma sheath is obtained, and the cause of the error is analyzed. With compensation information, the results of the proposed method can enable higher target-tracking accuracy for the spacecraft guidance system.

Performance Analysis of Ranging Techniques for the KPLO Mission

In this study, the performance of ranging techniques for the Korea Pathfinder Lunar Orbiter (KPLO) space communication system is investigated. KPLO is the first lunar mission of Korea, and pseudo-noise (PN) ranging will be used to support the mission along with sequential ranging. We compared the performance of both ranging techniques using the criteria of accuracy, acquisition probability, and measurement time. First, we investigated the end-to-end accuracy error of a ranging technique incorporating all sources of errors such as from ground stations and the spacecraft communication system. This study demonstrates that increasing the clock frequency of the ranging system is not required when the dominant factor of accuracy error is independent of the thermal noise of the ranging technique being used in the system. Based on the understanding of ranging accuracy, the measurement time of PN and sequential ranging are further investigated and compared, while both techniques satisfied the accuracy and acquisition requirements. We demonstrated that PN ranging performed better than sequential ranging in the signal-to-noise ratio (SNR) regime where KPLO will be operating, and we found that the T2B (weighted-voting balanced Tausworthe, voting v = 2) code is the best choice among the PN codes available for the KPLO mission.

Performance Analysis of Ranging Techniques for the KPLO Mission

In this study, the performance of ranging techniques for the Korea Pathfinder Lunar Orbiter (KPLO) space communication system is investigated. KPLO is the first lunar mission of Korea, and pseudo-noise (PN) ranging will be used to support the mission along with sequential ranging. We compared the performance of both ranging techniques using the criteria of accuracy, acquisition probability, and measurement time. First, we investigated the end-to-end accuracy error of a ranging technique incorporating all sources of errors such as from ground stations and the spacecraft communication system. This study demonstrates that increasing the clock frequency of the ranging system is not required when the dominant factor of accuracy error is independent of the thermal noise of the ranging technique being used in the system. Based on the understanding of ranging accuracy, the measurement time of PN and sequential ranging are further investigated and compared, while both techniques satisfied the accuracy and acquisition requirements. We demonstrated that PN ranging performed better than sequential ranging in the signal-to-noise ratio (SNR) regime where KPLO will be operating, and we found that the T2B (weighted-voting balanced Tausworthe, voting v = 2) code is the best choice among the PN codes available for the KPLO mission.

Inflatable antenna for cubesats: Motivation for development and antenna design

CubeSats and small satellites have potential to provide means to explore space and to perform science in a more affordable way. As the goals for these spacecraft become more ambitious in space exploration, moving from Low Earth Orbit (LEO) to Geostationary Earth Orbit (GEO) or further, the communication systems currently implemented will not be able to support those missions. One of the bottlenecks in small spacecraft communication systems is represented by antennas' size, due to the close relation between antenna gain and dimensions. Current antennas for CubeSats are mostly dipole or patch antennas with limited gain. Deployable (not inflatable) antennas for CubeSats are currently being investigated, but these solutions are affected by the challenge of packaging the whole deployable structure in a small spacecraft.The work that we propose represents the first attempt to develop an inflatable antenna for CubeSats. Inflatable structures and antennas can be packaged efficiently occupying a small amount of space, and they can provide, once deployed, large dish dimension and correspondent gain. Inflatable antennas have been previously tested in space (Inflatable Antenna Experiment, STS-77). However they have never been developed for small spacecraft such as CubeSats, where the packaging efficiency, the deployment, and the inflation represent a challenge.Our study explores for the first time the possibility of developing such antenna in a way compatible with CubeSat dimensions and constraints. The research provides answers on the possible dimensions for an inflatable antenna for small satellites, on the gain and resolution that can be achieved, and on the deployment and inflation mechanism compatible with CubeSat. Future work in the development of the antenna will include the test of the antenna in flight during a specific technical demonstration mission.The article is structured as follows: context and motivation for Cubesat inflatable antenna are described; then a study to design the antenna which achieves the required performance metrics, while respecting the constraints imposed by CubeSat structure, is presented.