Sound Transmission Research Articles

Experimental Investigation on the Acoustic Insulation Properties of Filled Paper Honeycomb-Core Wallboards.

Honeycomb plates, due to their multi-cavity structure, exhibit excellent mechanical properties and sound insulation. Previous studies have demonstrated that altering the cell size and arrangement of honeycomb structures impacts their acoustic performance. Based on these findings, this study developed a wallboard structure with enhanced sound insulation by filling the cavities with paper fiber/cement facesheets and designing a stacked core structure. Through the reverberation chamber-anechoic chamber sound insulation experiment under 100-6300 Hz excitation and conducting orthogonal experiments from three dimensions, it was found that: (1) Compared to no filling, the filling with straw and glazed hollow bead can increase the sound transmission loss (STL) by more than 50% in the frequency bandwidth above 2000 Hz. This indicates that both types of fillings can significantly enhance the sound insulation performance of the honeycomb structure without a significant increase in economic costs. (2) The increase in paper fiber/cement facesheets improves the STL across the entire experimental bandwidth, with a maximum improvement exceeding 70%. This structural design not only offers superior sound insulation performance but also better suits practical engineering applications. (3) Increasing the number of core stacking units (from one to three), taking straw-filled paper honeycomb-core wallboards as an example, effectively increased the STL bandwidth. (4) This test enriches the application of honeycomb plates in sound insulation. Introducing fiber paper fiber/cement facesheets and eco-friendly, low-cost straw improves sound insulation and enhances the strength of honeycomb, making them more suitable for construction, particularly as non-load-bearing structures.

Investigation of the Variation in Insertion Loss of Vertical Noise Barriers for High-speed Railways at Different Levels of Sound Transmission Loss

Abstract The present study investigates the impact of sound transmission loss of vertical noise barriers for high-speed railways on insertion loss at various speed grades and heights. The findings reveal an initial increase in insertion loss followed by a plateau as sound transmission loss improves. A threshold value exists for weighted sound transmission loss, beyond which the insertion loss remains relatively constant. This threshold referred to as the minimum weighted sound transmission loss decreases with increasing train speeds and increases with higher noise barrier heights. The variation in insertion loss was calculated for noise barriers at heights of 2m and 3m under different sound transmission loss conditions, using measured sound source data corresponding to train speeds of 150km/h, 200km/h, 250km/h, 300km/h, and 350km/h. By polynomial fitting, at a train speed of 400 km/h, the minimum weighted sound transmission loss for 2m and 3m high noise barriers are determined to be 20dB and 21dB respectively.

Topology optimization design of multi-modal resonators for metamaterial panels with maximized broadband vibroacoustic attenuation

Resonant metamaterial panels can achieve exceptional vibroacoustic attenuation by subwavelength local resonators attached to a host structure. While single-mode resonators provide improvements only in a narrow band, recent advancements propose multi-modal resonators for broadband attenuation. However, existing designs utilize only a limited number of modes, and effective methodologies are lacking to systematically design resonator layouts that achieve an appropriate amount of resonances across the target frequency range, with an adequate participating mass. In this study, we tackle this challenge by developing a dedicated topology optimization method for multi-modal resonator design in metamaterial panels. The method leverages effective thin plate modelling, i.e. a homogenized metamaterial representation through an effective mass density, which provides accurate and very efficient vibroacoustic predictions. The optimization objective is to maximize the broadband diffuse field sound transmission loss (STL) of the metamaterial panel while constraining mass. The optimization problem is solved by gradient-based mathematical programming, for which the necessary (adjoint) sensitivities of objective and constraints are derived. The efficacy of the proposed topology optimization approach is demonstrated by targeting the suppression of coincidence dips in orthotropic host plates. For narrowband coincidence dips, the optimized resonator exhibits maximized mass participation in one single mode of interest. For broadband coincidence dips, the method effectively generates multi-modal resonators with up to 6 resonances distributed across the target frequency range. It is finally demonstrated that the topology-optimized designs surpass the performance of simpler, parametrically optimized multi-modal resonator layouts, as well as of conventional treatments by a damping layer of rubber.

FOXO1-NCOA4 Axis Contributes to Cisplatin-Induced Cochlea Spiral Ganglion Neuron Ferroptosis via Ferritinophagy.

Mammalian cochlea spiral ganglion neurons (SGNs) are crucial for sound transmission, they can be damaged by chemotherapy drug cisplatin and lead to irreversible sensorineural hearing loss (SNHL), while such damage can also render cochlear implants ineffective. However, the mechanisms underlying cisplatin-induced SGNs damage and subsequent SNHL are still under debate and there is no currently effective clinical treatment. Here, this study demonstrates that ferroptosis is triggered in SGNs following exposure to cisplatin. Inhibiting ferroptosis protects against cisplatin-induced SGNs damage and hearing loss, while inducing ferroptosis intensifies these effects. Furthermore, cisplatin prompts nuclear receptor coactivator 4 (NCOA4)-mediated ferritinophagy in SGNs, while knocking down NCOA4 mitigates cisplatin-induced ferroptosis and hearing loss. Notably, the upstream regulator of NCOA4 is identified and transcription factor forkhead box O1 (FOXO1) is shown to directly suppress NCOA4 expression in SGNs. The knocking down of FOXO1 amplifies NCOA4-mediated ferritinophagy, increases ferroptosis and lipid peroxidation, while disrupting the interaction between FOXO1 and NCOA4 in NCOA4 knock out mice prevents the cisplatin-induced SGN ferroptosis and hearing loss. Collectively, this study highlights the critical role of the FOXO1-NCOA4 axis in regulating ferritinophagy and ferroptosis in cisplatin-induced SGNs damage, offering promising therapeutic targets for SNHL mitigation.

Ontogeny of the malleus in Mesocricetus auratus (Mammalia, Rodentia): Systematic and functional implications for the muroid middle ear.

The three mammalian auditory ossicles enhance sound transmission from the tympanic membrane to the inner ear. The anterior anchoring of the malleus is one of the key characters for functional classification of the auditory ossicles. Previous studies revealed a medial outgrowth of the mallear anterior process, the processus internus praearticularis, which serves as an anchor for the auditory ossicle chain but has been often missed due to its delicate nature. Here we describe the development and morphology of the malleus and its processus internus praearticularis in the cricetine rodent Mesocricetus auratus, compared to selected muroid species (Cricetus cricetus, Peromyscus maniculatus, and Mus musculus). Early postnatal stages of Mesocricetus show the formation of the malleus by fusion of the prearticular and mallear main body. The processus internus praearticularis forms an increasing broad lamina fused anteriorly to the ectotympanic in adult stages of all studied species. Peromyscus and Mus show a distinct orbicular apophysis that increases inertia of the malleus and therefore these species represent the microtype of auditory ossicles. In contrast, the center of mass of the malleus in the studied Cricetinae is close to the anatomical axis of rotation and their auditory ossicles represent the transitional type. The microtype belongs to the grundplan of Muroidea and is plesiomorphic for Cricetidae, whereas the transitional type evolved several times within Muroidea and represents an apomorphic feature of Cricetinae.

Adjustable stereo path design method based on pin-sculpture acoustic topological insulator with Z-dislocation defect immunity

The field of topological protected wave engineering, inspired by quantum mechanics, has generated significant interest. Acoustic analogs of electronic topological insulators provide new opportunities for manipulating sound propagation with unconventional acoustic edge modes that are immune to backscattering. Numerous reports have been published on the design of two-dimensional acoustic topological insulators (ATIs). However, the sound path of a two-dimensional design is simple, and its ability to control sound waves is limited. On the other hand, the design of 3D ATIs is relatively complex, making it difficult to manufacture and limiting its versatility. Based on the design idea of the 2D ATIs, inspired by the art named 3D pin-sculpture, an adjustable structure of a finite size consisting of spindle-shaped units with a variable cross section is designed to realize flexible path transformation. Furthermore, unlike two-dimensional structural defects, such as cavities and disorder, the analysis of vertical dislocation defects in finite-sized structures allows for the design of local sound propagation along the z-direction, providing a concept for constructing a stereo path. The designed structure also serves two functions: acoustic switch and delay. This idea offers an alternative approach to designing complex sound transmission paths.

Acoustic Transmission Measurements for Extracting the Mechanical Properties of Complex 3D MEMS Transducers.

Recent publications on acoustic MEMS transducers present a new three-dimensional folded diaphragm that utilizes buried in-plane vibrating structures to increase the active area from a small chip volume. Characterization of the mechanical properties plays a key role in the development of new MEMS transducers, whereby established measurement methods are usually tailored to structures close to the sample surface. In order to access the lateral vibrations, extensive and destructive sample preparation is required. This work presents a new passive measurement technique that combines acoustic transmission measurements and lumped-element modelling. For diaphragms of different lengths, compliances between 0.08 × 10-15 and 1.04 × 10-15 m3/Pa are determined without using destructive or complex preparations. In particular, for lengths above 1000 µm, the results differ from numerical simulations by only 4% or less.

Sound transmission of truss-based X-shaped inertial amplification metamaterial double panels

To enhance the low-frequency sound insulation performance of conventional double panels, this work proposes a truss-based X-shape inertial amplification (TXIA) metamaterial double panel. A semi-analytical method is developed for computing the sound transmission loss (STL) of the TXIA metamaterial double panel, with numerical and experimental validations confirming the convergence and accuracy of this method. To further investigate the low-frequency acoustic wave attenuation of the proposed structure, four configurations are analyzed and discussed. Numerical results indicate that, compared to conventional and equivalent mass double panels, the TXIA metamaterial double panel effectively shifts the STL peaks to lower frequencies, exhibiting higher STL amplitudes and a reduced low-STL region. Configurations incorporating different springs enhance the STL performance without altering mass or other parameters. The STL dips of the metamaterial double panel coincide with odd-odd modes of the double panel, which have higher radiation efficiencies. Parametric studies reveal that changes in the IA angle shift the dips induced by in-phase modes to lower frequencies, while increased stiffness shifts these in-phase dips to higher frequencies. The depth of the cavity between the two panels only affects the first-order anti-phase dip. Additionally, increased stiffness enhances the STL performance and introduces a new peak in the stiffness-controlled region. Due to its flexibility, the TXIA metamaterial double panel holds significant potential for industrial applications.

A two‐layered, analytically‐tractable, atmospheric model applied to Earth, Mars, and Titan with sources

AbstractThis work utilizes an analytic expression for a model of acoustic propagation in a two‐layered, inhomogeneous atmosphere developed by the authors. The model is used to study the atmospheres of Earth, Mars, and Titan. In particular, vertical wave propagation in these atmospheres is studied. The effect(s) of a two‐layered, inhomogeneous atmosphere on vertical, acoustic propagation due to a time‐harmonic, point source are examined. An adiabatic atmosphere is used for the bottom layer (troposphere) and an isothermal one for the top (stratosphere). The derived, analytic solution is expressed in terms of the acoustic pressure fluctuations. For the adiabatic layers, the solutions satisfy Bessel's equation for orders of , and for Earth, Mars, and Titan, respectively. The Bessel function's argument is , where and are dimensionless frequency and height, respectively. For the isothermal layer, the solution represents a damped, harmonic oscillator with a cutoff value of . Only values greater than are considered. The analysis and results are reported for combinations of single‐ and double‐layer atmospheres in the presence of a source on given boundaries. Acoustic propagation and transmission loss results are shown and discussed for all three planetary bodies: Earth, Mars, and Titan.

Electrospun Polyvinylidene Fluoride Membranes: Waterproofing and Acoustic Performance for Air and Acoustic Vents in Electronics.

Advancements in electronic devices demand materials capable of exceptional performance in various challenging environments. This study presents polyvinylidene fluoride (PVDF) nonwoven membranes with controlled porosity, created using an air-guided electrospinning method, followed by a calendaring process. These membranes exhibit a combination of water-repellent properties and sound transmission capabilities, making them ideal candidates for use in air and acoustic vents in electronic systems. A key feature of our membrane is the three-dimensional nanostructured pores, ranging from 0.20 to 0.76 μm, with a mean pore size of 0.51 μm, achieved through the formation of randomly arranged long nanofibers. By employing both experimental and theoretical methods, we achieved impressive performance metrics: air permeability of 0.86 cm3/cm2/s, water contact angles up to 139.3°, and breakthrough pressure as low as 0.27 MPa. Our PVDF nonwoven membranes maintain an optimal balance of stiffness, density, and air permeability, leading to exceptionally low sound transmission loss values ranging between -10 and -40 dBV/Pa, all while preserving their structural integrity. These findings contribute to the development of next-generation waterproof and acoustically permeable membranes, offering enhanced performance capabilities in demanding operational scenarios. This work advances the field of nanomaterials, environmental engineering, and acoustic technologies, with the potential to influence the design of future electronic devices.

Electrospun graphene oxide/polymeric nanocomposites for eardrum replacements

The development of structures and devices with enhanced acousto-mechanical properties is a topic of interest in engineering, especially in the biomedical field. A case study is the reconstruction of the tympanic membrane after partial or complete damage, such as from chronic suppurative otitis media, which is the leading cause of infectious diseases in children. In this work, we developed graphene-oxide (GO) nanocomposite polymeric scaffolds fabricated via electrospinning to assess their potential suitability as substitutes of the eardrum. To evaluate the structural influence of GO on the fibrous mesh, we performed a characterization in terms of wettability, mechanical properties, and surface morphology. Moreover, a finite-element model of the middle ear was employed to assess the acousto-mechanical behavior of the eardrum upon application of the developed scaffolds. We observed that GO influenced the morphology of the fibrous scaffolds by increasing the mean diameter of the fibers, their stiffness and strength, while decreasing the water contact angle, thus making the structures more hydrophilic. From the acoustic standpoint, the simulations showed that GO does not significantly affect sound transmission, except for PVDF-based structures, for which GO slightly improves the behavior only up to 2 kHz, but with a suboptimal performance at higher frequencies. Our results open to the development of fibrous nanocomposite polymeric scaffolds with an enhanced acoustic behavior for structural applications not limited to bioengineering.

Soundbox-based sound insulation measurement of composite panels with viscoelastic damping

Sound transmission loss (STL), an essential index for assessing the sound insulation performance of composite laminated structures, typically relies on experimental methods to measure. The soundbox method (SBM), a straightforward technique for measuring the STL, is sensitive to microphones’ positions. Within the framework of the Chebyshev-Ritz method, a semi-analytical vibro-acoustic model extended to composite laminated panels with viscoelastic damping (VED) is proposed for the first time. Based on the developed simplified layer-wise theory, the panel is modeled using three layers: the top face layer, the VED layer, and the bottom face layer. A closed cavity is added to the model as the soundbox enclosure used in actual measurements. By employing the Hamilton's principle, the governing equation for the coupling system is derived, and the vibration and internal acoustic responses of the coupling system are calculated. A discretization strategy is introduced to address the frequency-dependent properties of the VED layer, avoiding the need to reconstruct the stiffness matrix at each frequency. To obtain the STL of the panel, sound pressures at external measurement points are calculated based on the Rayleigh integral. The proposed model is validated against numerical results from finite element analyses. The influences of the microphone position inside and outside the cavity on the measured STL are studied. Furthermore, parametric studies over the microphones' positions are performed to enhance the SBM-based evaluation of the composite panel's sound insulation performance. The optimal locations for two internal microphones and one external microphone are recommended. Finally, experimental studies are carried out to guide the implementation of the SBM.

Sound transmission loss and bending properties of sandwich structures based on triply periodic minimal surfaces

Four types of triply periodic minimal surfaces sandwich structures (TPMS-SS), namely, G-SS, D-SS, D1-SS, and IWP-SS, have been proposed. The bending properties were evaluated by experiments and numerical simulations, and their sound insulation performance was investigated using theoretical, numerical and experimental methods. Firstly, the bending performance of four TPMS-SS was compared. Then, the acoustic vibration control equation of TPMS-SS was established and the theoretical solution for the sound transmission loss (STL) was derived based on Reissner's theory combined with the fluid-solid coupling condition. Next, experimental study was conducted on the STL performance of TPMS-SS using the impedance tube method, and the numerical model was verified using theoretical and experimental results. Finally, parametric studies were carried out to investigate the effects of parameters such as relative density (RD), panel thickness (hf), and sound incidence elevation angle (φ), as well as the type of structure, on the STL performance. The results show that TPMS-SSs can achieve >30 dB of STL in the frequency range of 1 Hz to 10 kHz. The STL value increases with relative density (RD), panel thickness (hf), and sound incident elevation angle (φ), while the location of the dips in the STL curves is affected by relative density and panel thickness. G-SS has the best bending performance, while D1-SS has the best acoustic performance. The results could be used for the optimization design of lightweight sandwich structures.

Development of a Non-Structural Prefabricated Panel Based on Construction and Demolition Waste for Sustainable Construction

The study focuses on developing a prefabricated panel for non-structural purposes by optimizing mortar mix designs incorporating recycled microplastic (RMP) and construction demolition waste (CDW) at various ratios (0, 10, 20, 30, and 100%). Experimental procedures encompassed material characterization, mortar specimen manufacturing, compression resistance testing, and thermal/acoustic panel tests following Colombian technical standards. Results indicate that incorporating 20% CDW enhances material strength, with cylinder number 3 (20% of CDW) achieving a resistance of 31.45 MPa. Panels incorporating recyclable waste materials show improved acoustic and thermal insulation properties, with up to 39 dB reduction in sound transmission and a 21 °C decrease in thermal transmission observed (5.6% and 35% for panel and door, respectively). This research advances sustainable construction practices demonstrating the potential of prefabricated panels using recyclable materials, offering eco-friendly solutions with enhanced performance characteristics for construction applications.

Vibration and acoustic properties of auxetic honeycomb sandwich panels with polyurea-metal laminate faceplates

The in-plane auxetic honeycomb sandwich panels (AHSPs) with polyurea-metal laminate (PML) as faceplates were proposed, and their vibration and acoustic properties were investigated. The natural frequency, damping loss factor, sound transmission loss (STL), and sound field pressure distribution were simulated by the finite element, which was then compared with the AHSP without a polyurea layer. The sound insulation properties of the AHSPs with PML faceplates were significantly enhanced due to the viscoelastic energy consumption of the polyurea layer. By changing the thickness of the polyurea layer and adopting different honeycomb geometries, the sound insulation ability of the sandwich plate could be further enhanced. The average STL rose by 2.3–4.7 dB when the polyurea layer thickness was increased, hence significantly improving the noise suppression ability of the AHSPs. When the geometric tilt angle θ of the honeycomb core is −45°, the sandwich panel exhibits superior sound insulation performance.

Characterizing bone density pattern and porosity in the human ossicular chain using synchrotron microtomography

The auditory ossicles amplify and transmit sound from the environment to the inner ear. The distribution of bone mineral density is crucial for the proper functioning of sound transmission as the ossicles are suspended in an air-filled chamber. However, little is known about the distribution of bone mineral density along the human ossicular chain and within individual ossicles. To investigate this, we analyzed fresh-frozen human specimens using synchrotron-based phase-contrast microtomography. In addition, we analyzed the volume and porosity of the ossicles. The porosity for the auditory ossicles lies, on average, between 1.92% and 9.85%. The average volume for the mallei is 13.85 ± 2.15 mm3, for the incudes 17.62 ± 4.05 mm3 and 1.24 ± 0.29 mm3 for the stapedes. The bone density distribution showed a similar pattern through all samples. In particular, we found high bone mineralization spots on the anterior crus of the stapes, its footplate, and along areas that are crucial for the transmission of sound. We could also see a correlation between low bone mineral density and holey areas where the bone is only very thin or missing. Our study identified a similar pattern of bone density distribution within all samples: regions exposed to lower forces generally show higher bone density. Further, we observed that the stapes shows high bone mineral density along the anterior crus and its footplate, which may indicate its importance in transmitting sound waves to the inner ear.

Optimizing the Shape of Space-Constrained Silencers Composed of Multiple Straight/Reverse Chambers Using the Simulated Annealing Method

Abstract To address the issue of hearing health problems caused by the broadband noise emitted from space-constrained marine diesel engines on a ship, an efficient silencer equipped at the engine's venting outlet is necessary. In consideration of the space-constrained situation that often occurs in ships, a reverse silencer with multiple chambers is introduced. A mathematical model of eigenfunction is adopted to consider the acoustic effect in high frequencies. An optimization of the silencer will be performed using the acoustic model of an eigenfunction together with the Simulated Annealing (SA) method under space-constrained conditions to achieve the best design. To pursue an efficient silencer design, two types of reverse silencers (Silencers A and B) are adopted to reduce the engine's venting noise. Acoustical models for straight chamber and reverse chamber silencers are checked before optimization. To assure the reliability of the SA scheme, a pure tone optimization at 250 Hz is exemplified. Results in silencers A and B show that the Sound Transmission Loss is approximately maximized at the desired frequency. Thereafter, a broadband noise elimination of engine noise using silencers A and B is performed. Simulated results show that overall noise abatement can be improved when the number of inverse chambers increases. The optimization of space-constrained reverse silencers with multiple chambers using eigenfunction in cooperation with Simulated Annealing (SA) has been accomplished. The overall silencer system's four-pole matrix is used to predict the silencer's acoustical performance of STL, which is achieved by multiplying individual four-pole matrices. With the introduction of the reverse silencer, the hearing health of workers can be protected, and noise pollution can be reduced in industrial settings.

Acoustic characterisation of boards manufactured with fruit stones mixed with coconut fibre

Sustainable and recycled materials are being used in a wide range of fields to solve a waste management problem and, at the same time, to confer them a second life. These materials include fruit stones of different crops: apricot, peach, cherry and olive. Employing fruit stones as acoustic materials contributes to minimise the environmental impact and to create a new product with interesting sound-absorption properties, apart from offering aesthetic added value. Some previous works have demonstrated the application of fruit stones panels as sound absorbers. This study aims to determine the acoustic properties of boards manufactured with a mixture of the four above fruit stone types. A coconut fibre layer is added to compare the results with and without coconut fibre. The experimental results show that acoustic properties improve by increasing board thickness and the sound-absorption coefficient is higher when a coconut fibre layer is added. Sound transmission loss is not significantly affected by adding the coconut fibre layer.

Experimental characterization of littoral atmospheric acoustics: Concurrent meteorological and acoustic observations.

The aim of this work is to describe a rich set of acoustic transmission loss observations that were completed in a coastal environment. The data library, enumerated in detail and publicly posted, is comprised of pitch-catch acoustic transmission loss measurements along with concurrent high spatial resolution meteorological observations. The meteorological parameters include near-surface temperature profiles, vertical wind speed profiles in the acoustic propagation direction, and significant wave height estimates. The acoustic source is positioned on an anchored vessel such that the first several hundred meters of the acoustic range is over open water with one microphone array positioned at the shore. A second microphone array is placed several hundred meters inland along the same source-to-receiver heading. The path between the two acoustic arrays is uniform salt marsh vegetation. Observations were made during seven sessions, which represent a variety of atmospheric conditions. That variety of conditions allows for some experimental generalizations about transmission loss as a function of meteorological observations. These include (1) the relationship between vertical effective sound speed profile and transmission loss, and (2) the variability of acoustic pressure with turbulence over time and elevation.

Realisation of broadband two-dimensional nonreciprocal acoustics using an active acoustic metasurface.

Nonreciprocal acoustic devices have been shown to be able to control incident waves propagating in one direction whilst allowing incident waves propagating in the opposite direction to be transmitted without modification. Nonreciprocal sound transmission, typically, has been achieved by introducing nonlinearities or directional biasing through fluid motion or spatiotemporal modulation of resonant cavities. However, the spatial arrangement of these approaches creates preferential characteristics in one direction such that the direction of the nonreciprocal behaviour is fixed and, thus, they are not straightforwardly reconfigurable. To address this issue, it has previously been revealed that feedforward wave-based active controllers can be employed to drive a single subwavelength active unit cell to achieve broadband nonreciprocal sound transmission or absorption in a one-dimensional linear acoustic system. Extending this concept, this paper investigates how the feedforward wave-based active controller can be used to drive an array of subwavelength active unit cells forming a metasurface to achieve broadband nonreciprocal sound absorption over a two-dimensional plane. Through simulation and experimental studies, this paper shows that active wave-based absorption control systems can achieve broadband nonreciprocal sound absorption when the incident waves are generated by normally and obliquely positioned primary sources.