Polar Solvents Research Articles

Dithieno[3,2-b; 2',3'-f]phosphepinium-Based Near-Infrared Fluorophores: px-π* Conjugation Inherent to Seven-Membered Phosphacycles.

Positively charged phosphorus-containing heterocycles are characteristic core skeletons for functional molecules. While various phosphonium-containing five- or six-membered-ring compounds have been reported, the seven-membered-ring phosphepinium have not been fully studied yet. In this study, dithieno[3,2-b; 2',3'-f]phosphepinium ions containing electron-donating aminophenyl groups were synthesized. An X-ray crystallographic analysis of the resulting donor-acceptor-donor dyes revealed a bent conformation of the central seven-membered ring. These compounds exhibit fluorescence in the near-infrared region with a bathochromic shift of ca. 70 nm compared to a phosphepine oxide congener and a large Stokes shift. High fluorescence quantum yields were obtained even in polar solvents due to the suppression of the nonradiative decay process. A theoretical study revealed that the phosphepinium skeleton is highly electron-accepting owing to the orbital interaction between a px orbital of the phosphonium moiety and a π* orbital of the 1,3,5-hexatriene moiety. Due to the lower-lying px orbital in the phosphonium moiety compared to that of the phosphine oxide and the bent conformation of the seven-membered ring, the phosphepinium ring permits effective px-π* conjugation. A large structural relaxation with a contribution of a quinoidal resonance structure is suggested in the excited state, which should be responsible for the bright emission with a large Stokes shift.

Access to Seleno‐Functionalized Thiazolo[3,2‐a]Pyrimidinones and Pyrimido[2,1‐b][1,3]Thiazinones via Selenocyclization of 2‐Alkenylthiopyrimidinones and Their Fused Analogs

AbstractThe methodology of electrophilic selenylation/cyclization of 2‐alkenylthiopyrimidinones and their fused analogs underlies most of the reported synthetic approaches to seleno‐functionalized thiazolo[3,2‐a]pyrimidinones and pyrimido[2,1‐b][1,3]thiazinones. We have developed a novel implementation of this strategy using as reagent phenylselenyl chloride or the visible‐light‐induced radical‐generating (PhSe)2/CBr4 system. The effect of the unsaturated substrate structure and reaction conditions on the selenocyclization regioselectivity has been revealed and analyzed in detail. It has been established that regardless of the conditions used, 2‐allylthiopyrimidinones react with selenylating agents via electrophilic 5‐exo‐trig cyclization mainly involving the N1 nitrogen atom to give selenium‐containing thiazolo[3,2‐a]pyrimidinones as major products. On the contrary, the selenocyclization with 2‐cinnamylthiopyrimidinones is dominated by the 6‐endo‐trig mode: it mostly involves six‐membered ring closure at the N1 or N3 atom thus leading to selenylated pyrimido[2,1‐b][1,3]thiazinones, with the regiochemistry governed by the position and nature of the substituents on the substrate pyrimidine ring. However, some of the fused cinnamylthio‐substituted substrates yield 5‐exo‐trig cyclized products in the LiClO4/МеNO2 system (a sufficiently polar solvent with a strong electrolyte added).

Proton Conduction via Water and Ammonia Coordinated Metal Cationic Species in MOF and MHOF Platforms.

Although metal-organic frameworks (MOFs) and metalo hydrogen-bonded organic frameworks (MHOFs) are designed as promising solid-state proton conductors by incorporating various protonic species intrinsically or extrinsically, design and development of such materials by employing the concept of proton conduction through coordinated polar protic solvent is largely unexplored. Herein, we have constructed two proton-conducting materials having different solvent coordinated metal cationic species: In-H2O-MOF, ({[In(H2O)6][In3(Pzdc)6]·15H2O}n; H2Pzdc: pyrazine-2,3-dicarboxylic acid) with coordinated water molecules from hexaaquaindium cationic species, and MHOF-4, ([{Co(NH3)6}2(2,6-NDS)2(H2O)2]n; 2,6-H2NDS: 2,6-naphthalenedisulfonic acid) with coordinated ammonia from hexaammoniacobalt cationic species. Interestingly, higher proton conductivity was achieved for In-H2O-MOF (1.5 × 10-5 S cm-1) than MHOF-4 (6.3 × 10-6 S cm-1) under the extreme conditions (80 ºC and 95% RH), which could be attributed to enhanced acidity of coordinated water molecules having much lower pKa value than that of coordinated ammonia. Greater charge polarization on hydrogen atoms of In3+-coordinated water molecules than that of Co2+-coordinated ammonia led to the high conductivity of In-H2O-MOF, as evident by quantum chemical studies. Such a comparative study on metal-coordinated protic polar solvents in achieving proton conduction in crystalline solids is yet to be made.

Dielectric‐Controlled Ultrafast Twisted Intramolecular Charge‐Transfer VS trans to cis Isomerization Pathways in a Push‐Pull Stilbene: Global Analysis Perspectives

We explore excited‐state dynamics of 4,4’‐dimethylaminonitrostilbene (DNS), a push‐pull stilbene, undergoing twisted intramolecular charge transfer and/or trans to cis isomerization, which is dependent on solvent polarity. We show how global analysis of femtosecond pump/broadband‐probe data aids in elucidating the involvement of interconverting conformers and/or isomers, often unexplored in single‐wavelength kinetic analysis.

Novel Cu(II) and Zn(II) Nanocomplexes Based on 5,6‐Diphenyl‐1,2,4‐Triazine: Preparation, Spectroscopic, TD‐DFT Calculations, Molecular Docking and Solvatochromic Studies

ABSTRACTThe reaction between 2‐hydroxy‐1‐naphthaldehyde and 3‐hydrazino‐5,6‐diphenyl‐1,2,4‐triazine produced a novel hydrazone ligand (DTHMN), which reacted with Cu(II) and Zn(II) metal ion in molar ratio 1:1, giving octahedral Cu(II)‐DTHMN and tetrahedral Zn(II)‐DTHMN nanosized complexes. The structural geometries have been elucidated on the basis of elemental analysis, nuclear magnetic resonance, infrared, electronic, and electron spin resonance spectra, and magnetic and molar conductance measurements as well as x‐ray diffraction and thermal analysis. TEM analysis showed that Zn(II)‐DTHMN complex has nano‐rode morphology shape. On the other hand, Cu(II)‐DTHMN has sphere shape within nanodomain. The DTHMN ligand exhibits ONN chelating sites through N‐triazine ring, azomethine nitrogen, and deprotonated OH group, forming the mononuclear metal complexes. The synthesized compounds showed a distinct solvatochromic behavior in different polar solvents. A bathochromic alteration is observed when moving from less to high polar solvents, indicating strong solute–solvent interactions accompanied by intramolecular charge transfer (ICT). The ground and excited state dipole moments of these compounds were determined experimentally by solvatochromic shift method using Bilot–Kawski, Lippert–Mataga, Bakhshiev, and Kawski–Chamma–Viallet functions and a microscopic Reichardt's solvent polarity parameter (ETN). The dipole moment is increased significantly upon excitation referring to stabilizing the excited species includes n–π* transition by polarity of solvent. The experimental results are generally consistent with those values obtained by B3LYP/GENECP method at 6‐311G(d,p) basis set for C, H, N, and O atoms and SDD (Stuttgart/Dresden) basis set for the metal atoms. The compounds were tested for antimicrobial efficiency against Gram‐positive bacteria, Gram‐negative bacteria, and fungus strain. Finally, molecular docking was used to study the interactions between donors (the current compounds) and receptors FabH–CoA complex (PDB code: 1HNJ).

Synthesis of carboxamide sensors for neurotoxic Cu2+ ions in safer green solvents and reaction conditions

Green amidation is simple and efficient for the synthesis of drugs and biomolecules. Green chemistry synthesis is always directed at achieving sustainability. Neurotoxins are critical targets for metabolic medicines to capture and eliminate from the body. Copper is a fatal brain neurotoxin. The C1-C4 probes were synthesized by reacting 3-coumarin carboxylic acid with 4-phenyl butyl amine, N-ethyl benzylamine, 4-dodecylaniline, and 3,3 - diphenyl propylamine in polar green solvent ethanol. These were tested for their metal-binding ability in environmentally safe aqueous acetonitrile with hyphenated techniques. The probes show significant binding with Cu2+ ions in the aqueous acetonitrile. The ascending order of anti-neurotoxin action is C3>C4>C2>C1 seen in the Limit of detection (Lod) values. Also, molecular mechanics (MM2) descriptors firmly point towards their use as drugs.

Zeta Potentials of Cotton Membranes in Acetonitrile Solutions.

Solid surfaces in contact with nonaqueous solvents play a key role in electrochemistry, analytical chemistry, and industrial chemistry. In this work, the zeta potentials of cotton membranes in acetonitrile solutions were determined by streaming potential and bulk conductivity measurements. By applying the Gouy-Chapman theory and the Langmuir adsorption isotherm of ions to the experimental data, the mechanism of the electrification at the cotton/acetonitrile interface is revealed for the first time to be solely due to ion adsorption on the surface, rather than proton dissociation at the interface. Different salts were found to produce opposite signs of the zeta potentials. This behavior can be attributed to ion solvation effects and the strong ordering of acetonitrile molecules at the interface. Furthermore, a trend of the electroviscous effect was observed, in agreement with the standard electrokinetic theory. These findings demonstrate that electrokinetics in acetonitrile, a polar aprotic solvent, can be treated in the same manner as in water.

Assessment of the biological activities of Azolla pinnata growing in the North-West of Algeri

Many plants' phytochemical composition and pharmacological activities offer medicinal potential for sci-entific research. This work aims to assess the bioactivities of Azolla pinnata extracts by evaluating their antioxidant, anticancer, antibacterial, and antifungal properties. Ultrasonic pretreatment of the samples was carried out to increase the yield of extracts. Two methods were chosen for extraction (maceration and de-coction), using five solvents of different polarities: water, methanol, water/methanol (20:80; v/v), wa-ter/acetone (10:90; v/v) and chloroform. The phytochemical contents were determined using chemical as-says and HPLC analysis. The antioxidants, anticancer, and antimicrobial capacities of the different extracts were evaluated. The results revealed that the ultrasonic treatment enhanced the extraction yield; the highest rate was noted for the methanolic extract (27.3±1.18%), while the lowest values were reported for those obtained by chloroform (5.8±1.04%). The phytochemical screening has shown that extracts are rich in fla-vonoids, tannins, and phenolic compounds. The assessment of the bioactivities of extracts reveals that A. pinnata possesses a wide range of pharmacological properties, including antioxidant, anticancer, antibac-terial, and antifungal. Despite the substantial correlation identified between bioactivity and bioactive con-tents in the extracts, the specific components accountable for each activity remain unknown. Keywords: Azolla pinnata, bioactive compounds, Ultrasonic treatment, phytochemicals, bioactivities as-sessment.

Sulfur Fluoride Exchange Enabled Polysufate Adsorbents: Flexible Group Embedded in Polymer Backbone Regulation Strategy for Organic Solvent Removal from Water.

Removal of organic solvents (such as chloroform, toluene, etc.) in trace amounts using adsorbents from water is a challenge due to their low removal efficiencies and poor selectivities. Herein, four polysulfates (P1-P4) with different flexible group embedded backbones were synthesized via a sulfur fluoride exchange (SuFEx) reaction, and their swelling behaviors in organic solvents were investigated. P1 with a flexible ethyl group on its backbone can selectively swell in aprotic organic solvents with medium and high polarities about 30-fold its original weight, which is much higher than that of P4 with rigid benzene on its backbone. Moreover, molecular dynamic (MD) simulation results showed that the swelling mechanism could be put down to the electrostatic and van der Waals forces between the polysulfates and organic solvents. Surprisingly, the polysulfates can be used to remove chloroform and toluene from water with removal efficiencies of up to 99.26 and 99.42%, respectively. Furthermore, the polysulfates also exhibited high selectivities and anti-interference performances toward chloroform in the presence of other pollutants and different acid/base environments. Our work provides a strategy to construct adsorbents with high efficiencies for removal of low concentrations of organic solvents from water.

X-ray structures, thermal stabilities and kinetics of guest desolvation of complexes of three fluorenone-derived host compounds with the polar aprotic guest solvent, tetramethylurea

X-ray structures, thermal stabilities and kinetics of guest desolvation of complexes of three fluorenone-derived host compounds with the polar aprotic guest solvent, tetramethylurea

Extending Shelf-life of Two-step Method Precursor Solutions through Targeted Regulation for Highly Efficient and Reproducible Perovskite Solar Cells.

Precursor solution aging process can cause significant influence on the photovoltaic performance of perovskite solar cells (PVSCs). Notably, we first observe that the aging phenomenon is more severe in the precursor of two-step sequential method compared to that in one-step method due to that the protic solvent isopropanol facilitates amine-cation side reaction and iodide ions oxidation. Herein, we report a novel approach for selectively stabilizing both organic amine salt and lead iodide (PbI2) precursor solutions in two-step method. The introduction of benzene-1,3-dithiol into organic amine salt solution can mitigate amine-cation side reactions due to the formation of an acidic and reducing environment. Simultaneously, decamethylferrocene (FcMe10/FcMe+10) pair can act as a redox shuttle in PbI2 solution to concurrently oxidize Pb0 and reduce I2 in cyclic manner. Consequently, the PVSCs device fabricated from ameliorative precursor solutions demonstrates superior power conversion efficiency of 25.31%, retaining 95% of its efficiency after 21 days of solution aging. Moreover, the unencapsulated devices maintain 85% of primitive efficiency for 1500 h at maximum power point tracking under continuous illumination. This work establishes a fundamental guidance and scientific direction for the stabilization of two-step perovskite precursor solutions.

Complex Phase Transitions of Fully Rigid Sphere-Rod Amphiphiles Induced by Solvent Polarity in Dilute Solutions.

We report complex macrophase and microphase transitions of rigid amphiphiles with spherical Keggin molecular clusters as the solvophilic block and rod-like rigid oligofluorene (OF) as the solvophobic block in mixed solvents of water and polar organic solvent. By properly adjusting the solvent polarity, the amphiphiles are found to respond accordingly by self-assembling into multilayered incomplete onion-like structures (10-25 vol % THF), single-layered vesicular structures (60 vol % THF), and an unexpected macrophase separation in the middle (40-50 vol % THF), which is due to the anomalous trends in Keggin solubility as a result of the nature of TBA+ counterions. The rigidity of the OF block prevents the amphiphile from assembling by following the rule of packing parameters; instead, interdigitation among different rods leads to the formation of the solvophobic domain to achieve self-assembly. The incomplete onion structures are controlled by the interdigitation of rigid rods for the number of layers and the electrostatic interaction among Keggin head groups for the interlayer distance. When the degree of interdigitation becomes lower, the self-assembly process shows a trend that can be explained by the traditional rule of packing parameter. This study demonstrates the formation of different self-assembled structures by rigid amphiphiles and their transitions induced by solvent composition. The self-assembly (microphase separation) of rigid amphiphiles in a dilute solution could indeed represent a broad area containing complicated, uncharted rules.

Linking the chemical profile with the biological activities of Reaumuria alternifolia from Turkish flora

The chemical composition and in vitro bioactivity of five Reaumuria alternifolia extracts obtained using solvents of different polarities (hexane, ethyl acetate, dichloromethane, methanol, and water) were investigated. LC-MSn analysis revealed the presence of phenolic acid derivatives, flavonoids, tannins, and anthocyanins as bioactive molecules in the examined plant material, the majority identified in the methanol extract. Bioactivity was evaluated in vitro through antioxidant, enzyme inhibitor, and cytotoxic assays. Extracts presented a significant biological potential, with the methanol extract being the most effective. The analyzed extracts showed that this readily available raw material is a rich source of phytonutrients, primarily antioxidant compounds. This research raises curiosity about the future perspective of Turkish Reaumuria alternifolia extracts, for the formulation of new products as nutritional supplements or improving the quality of existing products. These potential applications inspire hope for the future of natural product development and its impact on human health.

Solvent effect, DFT and NLO studies of A–π–D–π–A and A–π–D–π–D push–pull chromophore of 1,2-diazepin-4-ol based derivatives with optical limiting application

The nonlinear optical properties of push–pull chromophores, namely (E)-7-(4-bromophenyl)-2,5-bis(4-nitrophenyl)-3,4,5,6-tetrahydro-2H-1,2-diazepin-4-ol (A–π–D–π–A) and (E)-7-(4-bromophenyl)-5-(4-nitrophenyl)-2-phenyl-3,4,5,6-tetrahydro-2H-1,2-diazepin-4-ol (A–π–D–π–D), have been investigated using the z-scan technique. NMR, FT-IR, and UV–visible spectral analysis have been performed. The results were compared with density functional theory calculations employing the B3LYP/6-311++G (d, p) basis set. Geometry optimization, frontier molecular analysis, and TD-DFT calculations were conducted in various solvent environments to elucidate solute–solvent interactions. Gaussian 09 software was employed for natural bond orbital analysis, natural population analysis, and molecular electrostatic potential exploration. This comprehensive approach provides insights into the molecular structure and electronic properties of the investigated chromophores, shedding light on their potential applications in nonlinear optics. Normal coordinate analysis using the MOLVIB software has been used to assign the vibrational mode unambiguously. Theoretical second-order hyperpolarizability was computed, and NLO investigations have been employed to determine the second-order hyperpolarizability in both the polar and non-polar solvents. Further, the optical limiting capability was also examined.

Photochemistry of a proton relay – system with triple fluorescence

The excited state of proton transfer and the dynamics of the excited states of three 3-carboxy substituted bis-salicylidenes (H4L1-3) have been studied by combining steady state and time-resolved absorption and emission methods, and with quantum chemical calculations. The 3-carboxy substituted bis-salicylidenes contain two coupled intramolecular hydrogen bonds of the OH…OH…N type. This system has two proton transfer sites. The compounds have excitation – dependent emission and a high sensitivity to the solvent polarity. ESIPT and deprotonation result in the co-existence of enol, keto, anionic and zwitterionic species with or without quinoid structure, whose emission bands are located from the blue to the yellowish-green region. The photophysical processes in the nano-to-microseconds timescale have been linked to the intermolecular interactions with the solvent, where hydrogen bonding leads to the formation of a cyclic 1:2 solute − solvent complex. Transient absorption spectroscopy revealed that the generation of charged structures of H4L1-3 occurs through a solvent-assisted proton transfer along the chain of two solvent molecules, which act as a proton-relay system. The computational study of the energy profiles and of the enol-to-keto tautomerization with explicit solvent molecules has been performed for the first time for this kind of ESIPT system.

Solvent polarity-driven modulation of excited states: A DFT and spectroscopic analysis

The relationship between the photophysical properties of N,N,N’,N’-tetra-p-tolyl-benzidine (TTB) and [1,4-bis[2-[4-[N,N-di(p-tolyl)amino]phenyl]vinyl]benzene (DSB) molecules and solvent polarity was explored through steady-state spectroscopy, femtosecond transient absorption spectroscopy, and quantum chemical calculations. Computational results and steady-state spectra reveal that the lowest singlet excited states of TTB and DSB are primarily characterized by localized excited (LE) states in nonpolar cyclohexane (CHX), whereas intramolecular charge transfer (ICT) components predominate in highly polar acetonitrile (ACN). Compared to TTB, the excited-state potential of DSB demonstrates a heightened sensitivity to solvent polarity, exhibiting larger dipole moments due to enhanced electron transfer enabled by the incorporation of styrene groups. Ultrafast femtosecond transient absorption spectroscopy distinctly shows the transition from LE states in nonpolar CHX to ICT states in highly polar ACN. The deactivation mechanisms were further elucidated to understand how solvent polarity modulates excited states and high quantum yields, providing valuable insights for the design and application of photophysical materials.

Design and synthesis of a 2,5-Diarylthiophene chromophore for enhanced near-infrared two-photon uncaging efficiency of calcium ions.

The design and synthesis of two-photon-responsive chromophores have recently garnered significant attention owing to their potential applications in materials and life sciences. In this study, a novel π-conjugated system, 2-dimethylaminophenyl-5-nitrophenylthiophene derivatives, featuring a thiophene unit as the π-linker between the donor (NMe2C6H4-) and acceptor (NO2C6H4-) units was designed, synthesized, and applied for the development of two-photon-responsive chromophores as a photoremovable protecting group in the near-infrared region. Notably, the positional effect of the nitro group (NO2), meta versus para position, was observed in the uncaging process of benzoic acid. Additionally, while the para-isomer exhibited a single fluorescence peak, a dual emission was detected for the meta-isomer in polar solvents. The caged calcium ion (Ca2+) incorporating the newly synthesized thiophene unit exhibited a sizable two-photon absorption cross-section value (σ2 = 129 GM at 830nm). Both one-photon and two-photon photoirradiation of caged calcium ions successfully released calcium ions, indicating the potential utility of 2,5-diarylthiophene derivatives in future biological studies.

Isomerization, Protonation, and Hydrolysis Properties of Naphthalimide-Containing Spiropyran in Aqueous Media.

Synthesis of spiropyrans exhibiting ring-opening/closing isomerization driven by external stimuli is a challenging subject for the development of molecular sensors. A napthalimide-containing spiropyran (1) promotes rapid isomerization between the spirocyclic (SP) form and ring-opened merocyanine (MC) form by the change in solvent polarity even under the dark condition at room temperature. In this work, the effect of water on the isomerization behavior of 1 was studied. The addition of water caused an MC-water H-bonding interaction and shifted the resonance MC structure to the zwitterionic form with a lower ground-state energy. The stabilized MC form promoted spontaneous SP → MC isomerization and increased the equilibrium MC concentration. The effect of pH on the behavior of 1 was also studied. In acidic-neutral media, protonation/deprotonation of the naphthalimide moiety led to rapid and reversible changes in the absorption spectra. In contrast, strongly basic media (pH > 12) promoted irreversible base-catalyzed hydrolysis of the alkene moiety.

Modulated assembly and structural diversity of heterometallic Sn-Ti oxo clusters from inorganic tin precursors.

Through modulating the multidentate ligands, solvent environments, and inorganic tin precursors during the synthesis processes, we have successfully prepared a series of unprecedented heterometallic Sn-Ti oxo clusters with structural diversity and different physiochemical attributes. Initially, two Sn6Ti10 clusters were synthesized using trimethylolpropane as a structure-oriented ligand and SnCl4·5H2O as a tin source. Then, when a larger pentadentate ligand di(trimethylolpropane) was used instead of trimethylolpropane and aprotic acetonitrile solvent was introduced into the reaction system, four low-nuclearity Sn-Ti oxo clusters were discovered, including two Sn1Ti1, one Sn2Ti2 and one Sn2Ti6. Finally, two mixed-valence state clusters, SnII4SnIV2TiIV14 and SnII4SnIV4TiIV20, were obtained by transforming the tin precursor from SnCl4·5H2O to SnCl2·2H2O and adjusting the acetonitrile solution with trace acetic acid/formic acid. Sn8Ti20 is the highest-nuclearity heterometallic Sn-Ti oxo cluster to date. Moreover, comparative electrocatalytic CO2 reduction experiments were carried out, and it was concluded that the Sn8Ti20-decorated electrode showed the most satisfactory performance due to the influence of mixed-valence states of the Sn atoms and the charging effects provided by 20 Ti4+ ions. This study presents important guiding significance for the design, synthesis and application optimization of functional heterometallic nanoclusters.

Synergistic preparation of organic solvent nanofiltration membranes from polydopamine/polyethyleneimine interlayers with aminated attapulgite

This study utilized polydopamine (PDA)/polyethyleneimine(PEI) as the hydrophilic interlayer and added aminated attapulgite (ATP-NH2) to the aqueous phase monomer for interfacial polymerization (IP) to synergistically create nanofiltration membranes resistant to organic solvents. The hydrophilic nature of the PDA/PEI interlayer facilitates the rapid passage of polar solvents and results in excellent adhesion, ensuring tight bonding between the ultrafiltration support membranes and the active layer. Furthermore, the incorporation of the ATP-NH2 nanoparticles played a pivotal role in regulating the IP process. The resulting nanofiltration membranes, produced through the combined efforts of these components, achieved an optimal methanol permeation flux of 14.05 L m−2h−1 bar−1, with a rejection rate of Evans blue dye maintained at 99.42 %. Despite being exposed to N, N-dimethylformamide (DMF) at 80 ℃ for a period of 5 days, the nanofiltration membranes maintained both their exceptional separation effectiveness and stability. These findings suggest promising application prospects for the developed nanofiltration membranes.