Solid-state Systems Research Articles

Remote-Entanglement Protocols for Stationary Qubits with Photonic Interfaces

The generation of entanglement between distant quantum systems is at the core of quantum networking. In recent years, numerous theoretical protocols for remote-entanglement generation have been proposed, many of which have been experimentally realized. Here, we provide a modular theoretical framework to elucidate the general mechanisms of photon-mediated entanglement generation between single spins in atomic or solid-state systems. Our framework categorizes existing protocols at various levels of abstraction and allows for combining the elements of different schemes in new ways. These abstraction layers make it possible to readily compare protocols for different quantum hardware. To enable the practical evaluation of protocols tailored to specific experimental parameters, we have devised numerical simulations based on the framework with our codes available online. Published by the American Physical Society 2024

Online Calibration of Extrinsic Parameters for Solid-State LIDAR Systems.

This work addresses the challenge of calibrating multiple solid-state LIDAR systems. The study focuses on three different solid-state LIDAR sensors that implement different hardware designs, leading to distinct scanning patterns for each system. Consequently, detecting corresponding points between the point clouds generated by these LIDAR systems-as required for calibration-is a complex task. To overcome this challenge, this paper proposes a method that involves several steps. First, the measurement data are preprocessed to enhance its quality. Next, features are extracted from the acquired point clouds using the Fast Point Feature Histogram method, which categorizes important characteristics of the data. Finally, the extrinsic parameters are computed using the Fast Global Registration technique. The best set of parameters for the pipeline and the calibration success are evaluated using the normalized root mean square error. In a static real-world indoor scenario, a minimum root mean square error of 7 cm was achieved. Importantly, the paper demonstrates that the presented approach is suitable for online use, indicating its potential for real-time applications. By effectively calibrating the solid-state LIDAR systems and establishing point correspondences, this research contributes to the advancement of multi-LIDAR fusion and facilitates accurate perception and mapping in various fields such as autonomous driving, robotics, and environmental monitoring.

Programming sp3 Quantum Defects along Carbon Nanotubes with Halogenated DNA.

Atomic defect color centers in solid-state systems hold immense potential to advance various quantum technologies. However, the fabrication of high-quality, densely packed defects presents a significant challenge. Herein we introduce a DNA-programmable photochemical approach for creating organic color-center quantum defects on semiconducting single-walled carbon nanotubes (SWCNTs). Key to this precision defect chemistry is the strategic substitution of thymine with halogenated uracil in DNA strands that are orderly wrapped around the nanotube. Photochemical activation of the reactive uracil initiates the formation of sp3 defects along the nanotube as deep exciton traps, with a pronounced photoluminescence shift from the nanotube band gap emission (by 191 meV for (6,5)-SWCNTs). Furthermore, by altering the DNA spacers, we achieve systematic control over the defect placements along the nanotube. This method, bridging advanced molecular chemistry with quantum materials science, marks a crucial step in crafting quantum defects for critical applications in quantum information science, imaging, and sensing.

First-Principles Investigations of the Electronic Structure and Mechanical Characteristics of Nd3+-Doped YAlO3 Crystals

Near-infrared laser radiation based on Nd3+-doped yttrium ortho-aluminate (Nd:YAlO3, Nd:YAP) has garnered significant interest regarding solid-state lasers. Nevertheless, the crystal microstructures and electronic characteristics of Nd:YAP are still unclear, and the unique physical properties underlying its enormous applications require clarification. In this study, we conducted first-principles calculations at the atomic level to explore the electronic properties and mechanical characteristics of both pure YAP and Nd3+-doped YAP. The results suggest that the substitution of the Y3+ ion site with the Nd3+ impurity ion induces slight structural distortion in the YAP crystal lattice. An impurity band emerges between the original conduction band and the valence band, attributed to the 4f orbital of the Nd3+ ion, exerting a substantial influence on the narrowing of the band gap. Through an analysis of the mechanical characteristics of both pure YAP and Nd:YAP, we conclude that the incorporation of Nd3+ atoms leads to a reduction in the mechanical properties of YAP to a certain extent. Our study can serve as a foundational data source for investigations into material performance, especially for the application of Nd:YAP in solid-state laser systems.

Quantum simulation of an extended Dicke model with a magnetic solid

The Dicke model describes the cooperative interaction of an ensemble of two-level atoms with a single-mode photonic field and exhibits a quantum phase transition as a function of light–matter coupling strength. Extending this model by incorporating short-range atom–atom interactions makes the problem intractable but is expected to produce new physical phenomena and phases. Here, we simulate such an extended Dicke model using a crystal of ErFeO3, where the role of atoms (photons) is played by Er3+ spins (Fe3+ magnons). Through terahertz spectroscopy and magnetocaloric effect measurements as a function of temperature and magnetic field, we demonstrated the existence of a novel atomically ordered phase in addition to the superradiant and normal phases that are expected from the standard Dicke model. Further, we elucidated the nature of the phase boundaries in the temperature–magnetic-field phase diagram, identifying both first-order and second-order phase transitions. These results lay the foundation for studying multiatomic quantum optics models using well-characterized many-body solid-state systems.

Pediococcus spp.-mediated competition interaction within Daqu microbiota determines the temperature formation and metabolic profiles.

Fermented microbiota is critical to the formation of microenvironment and metabolic profiles in spontaneous fermentation. Microorganisms generate a diverse array of metabolites concurrent with the release of heat energy. In the case of Daqu fermentation, the peak temperature exceeded 60°C, forming a typical high-temperature fermentation system known as high-temperature Daqu. However, microorganisms that cause the quality variation in Daqu and how they affect the functional microbiota and microenvironment in the fermentation process are not yet clear. This study adopted high-throughput sequencing and monitored the dynamic fluctuations of metabolites and environmental factors to identify the pivotal microorganism responsible for the alterations in interaction patterns of functional keystone taxa and quality decline in the fermentation system of different operational areas during the in situ fermentation process that had been mainly attributed to operational taxonomic unit (OTU)_22 (Pediococcus acidilactici). Additionally, we used isothermal microcalorimetry, plate inhibition experiments, and in vitro simulation fermentation experiments to explore the impact of Pediococcus spp. on heat generation, microorganisms, and metabolite profiles. Results showed the heat peak generated by Pediococcus spp. was significantly lower than that of Bacillus spp., filamentous fungi, and yeast. In addition, the preferential growth of P. acidilactici strain AA3 would obviously affect other strains to colonize through competition, and its metabolites made a significant impact on filamentous fungi. The addition of P. acidilactici strain AA3 in simulated fermentation would cause the loss of pyrazines and acids in metabolites. These evidences showed that the overgrowth of Pediococcus spp. greatly influenced the formation of high temperatures and compounds in solid-state fermentation systems. Our work illustrated the vital impact of interaction variability mediated by Pediococcus spp. for microbial assembly and metabolites, as well as in forming temperature. These results emphasized the functional role of Daqu microbiota in metabolites and heat production and the importance of cooperation in improving the fermentation quality.IMPORTANCEThe stable and high-quality saccharifying and fermenting starter in traditional solid-state fermentation was the prerequisite for liquor brewing. An imbalance of microbial homeostasis in fermentation can adversely impact production quality. Identification of such critical microorganisms and verifying their associations with other fermentation parameters pose a challenge in a traditional fermentation environment. To enhance the quality of spontaneous fermented products, strategies such as bioaugmentation or the control of harmful microorganisms would be employed. This work started with the differences in high-temperature Daqu metabolites to explore a series of functional microorganisms that could potentially contribute to product disparities, and found that the differences in interactions facilitated directly or indirectly by Pediococcus spp. seriously affected the development of microbial communities and metabolites, as well as the formation of the microenvironment. This study not only identified functional microbiota in Daqu that affected fermentation quality, but also demonstrated how microorganisms interact to affect the fermentation system, which would provide guidance for microbial supervision in the actual production process. Besides, the application of isothermal microcalorimetry in this study was helpful for us to understand the heat production capacity of microorganisms and their adaptability to the environment. This study presented a commendable framework for improving and controlling the quality of traditional fermentation and inspired further investigations in similar systems.

Weak Electrostatic Force on K+ in Gel Polymer Electrolyte Realizes High Ion Transference Number for Quasi Solid-State Potassium Ion Batteries.

Quasi-solid-state potassium-ion batteries (SSPIBs) are of great potential for commercial use due to the abundant reserves and cost-effectiveness of resources, as well as high safety. Gel polymer electrolytes (GPEs) with high ionic conductivity and fast interfacial charge transport are necessary for SSPIBs. Here, the weak electrostatic force between K+ and electronegative functional groups in the ethoxylated trimethylolpropane triacrylate (ETPTA) polymer chains, which can promote fast migration of free K+, is revealed. To further enhance the interfacial reaction kinetics, a multilayered GPE by in situ growth of poly(vinylidenefluoride-co-hexafluoropropylene) (PVDF-HFP) on ETPTA (PVDF-HFP|ETPTA|PVDF-HFP) is constructed to improve the interface contact and provide sufficient K+ concentration in PVDF-HFP. A high ion transference number (0.92) and a superior ionic conductivity (5.15 × 10-3 S cm-1) are achieved. Consequently, the SSPIBs with both intercalation-type (PB) and conversion-type (PTCDA) cathodes show the best battery performance among all reported SSPIBs of the same cathode. These findings demonstrate that potassium-ion batteries have the potential to surpass Li/Na ion batteries in solid-state systems.

Symmetry Breaking and Ascending in the Magnetic Kagome Metal FeGe

Spontaneous symmetry breaking—the phenomenon in which an infinitesimal perturbation can cause the system to break the underlying symmetry—is a cornerstone concept in the understanding of interacting solid-state systems. In a typical series of temperature-driven phase transitions, higher-temperature phases are more symmetric due to the stabilizing effect of entropy that becomes dominant as the temperature is increased. However, the opposite is rare but possible when there are multiple degrees of freedom in the system. Here, we present such an example of a symmetry-ascending phenomenon upon cooling in a magnetic kagome metal FeGe by utilizing neutron Larmor diffraction and Raman spectroscopy. FeGe has a kagome lattice structure with simple A-type antiferromagnetic order below Néel temperature TN≈400 K and a charge density wave (CDW) transition at TCDW≈110 K, followed by a spin-canting transition at around 60 K. In the paramagnetic state at 460 K, we confirm that the crystal structure is indeed a hexagonal kagome lattice. On cooling to around TN, the crystal structure changes from hexagonal to monoclinic with in-plane lattice distortions on the order of 10−4 and the associated splitting of the double-degenerate phonon mode of the pristine kagome lattice. Upon further cooling to TCDW, the kagome lattice shows a small negative thermal expansion, and the crystal structure gradually becomes more symmetric upon further cooling. A tendency of increasing the crystalline symmetry upon cooling is unusual; it originates from an extremely weak structural instability that coexists and competes with the CDW and magnetic orders. These observations are against the expectations for a simple model with a single order parameter and hence can only be explained by a Landau free energy expansion that takes into account multiple lattice, charge, and spin degrees of freedom. Thus, the determination of the crystalline lattice symmetry as well as the unusual spin-lattice coupling is a first step towards understanding the rich electronic and magnetic properties of the system, and it sheds new light on intertwined orders where the lattice degree of freedom is no longer dominant. Published by the American Physical Society 2024

Magnon Bose–Einstein condensates: From time crystals and quantum chromodynamics to vortex sensing and cosmology

Under suitable experimental conditions, collective spin-wave excitations, magnons, form a Bose–Einstein condensate (BEC), where the spins precess with a globally coherent phase. Bose–Einstein condensation of magnons has been reported in a few systems, including superfluid phases of 3He, solid state systems, such as yttrium-iron-garnet films, and cold atomic gases. The superfluid phases of 3He provide a nearly ideal test bench for coherent magnon physics owing to experimentally proven spin superfluidity, the long lifetime of the magnon condensate, and the versatility of the accessible phenomena. We first briefly recap the properties of the different magnon BEC systems, with focus on superfluid 3He. The main body of this review summarizes recent advances in the application of magnon BEC as a laboratory to study basic physical phenomena connecting to diverse areas from particle physics and cosmology to vortex dynamics and new phases of condensed matter. This line of research complements the ongoing efforts to utilize magnon BECs as probes and components for potentially room-temperature quantum devices. In conclusion, we provide a roadmap for future directions in the field of applications of magnon BEC to fundamental research.

Giant microwave–optical Kerr nonlinearity via Rydberg excitons in cuprous oxide

Microwave–optical conversion is key to future networks of quantum devices, such as those based on superconducting technology. Conversion at the single quantum level requires strong nonlinearity, high bandwidth, and compatibility with a millikelvin environment. A large nonlinearity is observed in Rydberg atoms, but combining atomic gases with dilution refrigerators is technically challenging. Here, we demonstrate a strong microwave–optical nonlinearity in a cryogenic, solid-state system by exploiting Rydberg states of excitons in Cu2O. We measure a microwave–optical cross-Kerr coefficient of B0 = 0.022 ± 0.008 m V−2 at 4 K, which is several orders of magnitude larger than other solid-state systems. The results are in quantitative agreement with a nonlinear susceptibility model based on the giant microwave dipole moment between nearby excitonic states. Our results highlight the potential of Rydberg excitons for nonlinear optics and form the basis for a microwave–optical frequency converter based on Cu2O.

Anisotropic Quantum Hall Droplets

We study two-dimensional (2D) droplets of noninteracting electrons in a strong magnetic field, placed in a confining potential with arbitrary shape. Using semiclassical methods adapted to the lowest Landau level, we obtain near-Gaussian energy eigenstates that are localized on level curves of the potential and have a position-dependent height. This one-particle insight allows us to deduce explicit formulas for expectation values of local many-body observables, such as density and current, in the thermodynamic limit. In particular, correlations along the edge are long-ranged and inhomogeneous. As we show, this is consistent with the system’s universal low-energy description as a free 1D chiral conformal field theory of edge modes, known from earlier works in simple geometries. A delicate interplay between radial and angular dependencies of eigenfunctions ultimately ensures that the theory is homogeneous in terms of the canonical angle variable of the potential, despite its apparent inhomogeneity in terms of more naïve angular coordinates. Finally, we propose a scheme to measure the anisotropy by subjecting the droplet to microwave radiation; we compute the corresponding absorption rate and show that it depends on the droplet’s shape and the waves’ polarization. These results, both local and global, are likely to be observable in solid-state systems or quantum simulators of 2D electron gases with a high degree of control on the confining potential. Published by the American Physical Society 2024

Unified Entropy-Ruled Einstein's Relation for Bulk and Low-Dimensional Molecular-Material Systems: A Hopping-to-Band Shift Paradigm.

We present a unified paradigm on entropy-ruled Einstein's diffusion-mobility relation (μ/D ratio) for 1D, 2D, and 3D free-electron solid state systems. The localization transport in the extended molecules is well approximated by the continuum time-delayed hopping factor within our unified entropy-ruled transport method of noninteracting quantum systems. Moreover, we generalize an entropy-dependent diffusion relation for 1D, 2D, and 3D systems as defined by , where heff and d are the effective entropy and dimension (d = 1, 2, 3), respectively. This generalized relation is valid for both equilibrium and nonequilibrium transport systems since the parameter heff is closely connected with the nonequilibrium fluctuation theorem-based entropy production rule. Importantly, we herein revisit the Boltzmann approach using an entropy-ruled method for mobility calculation for the universal quantum materials that is expressed as , where is the diffusion constant for band transport systems and η is the chemical potential. According to our entropy-ruled μ/D relation, the Navamani-Shockley diode equation is transformed.

Selective Generation of V2 Silicon Vacancy Centers in 4H-Silicon Carbide.

The deterministic generation of individual color centers with defined orientations or types in solid-state systems is paramount for advancements in quantum technologies. Silicon vacancies in 4H-silicon carbide (4H-SiC) can be formed in V1 and V2 types. However, silicon vacancies are typically generated randomly between V1 and V2 types with similar probabilities. Here, we show that the preferred V2 centers can be selectively generated by focused ion beam (FIB) implantation on the m-plane in 4H-SiC. When implantation is on the m-plane (a-plane), the generation probability ratio between V1 and V2 centers increase exponentially (remains constant) with decreasing FIB fluences. With a fluence of 10 ions/spot, the probability to generate V2 centers is seven times higher than V1 centers. Our results represent a critical step toward the deterministic creation of specific defect types.

RETRACTED: Nanoscale silicon porous materials for efficient hydrogen storage application

The increasing energy demand and the worldwide energy crisis must be met in large part via the sustainable growth of hydrogen energy, since this economy is relied upon to provide clean and carbon-free energy carriers. It is anticipated that the growing demand for light and heavy fuel cell cars would stimulate the development of onboard solid-state hydrogen technology. The research here concentrates on the importance of various permeable substances such as polymers in general, metallic substances, and complex metal hydrides, even if Si nanostructures (SiNSs) have become known as the obvious contender for solid-state hydrogen storage systems. SiNSs have gained prominence as a leading candidate for solid-state hydrogen storage systems. Renowned for their high storage capacity, SiNSs, including silicon nanowires and quantum dots, exhibit promising potential in addressing challenges associated with traditional hydrogen storage methods, positioning them as a key player in advancing clean and efficient energy storage technologies. SiNSs play a crucial role in advancing solid-state hydrogen storage technology. SiNSs, including silicon nanowires and quantum dots, exhibit high storage capacity. Despite challenges like surface oxidation, SiNS holds promise for efficient hydrogen storage, contributing to the development of sustainable energy solutions and mitigating the environmental impact associated with conventional automotive technologies. We focus on the processes that result in permeable silicon, nanowires made of porous silicon, and Si quantum dots. This investigation elucidates the characteristics and patterns of hydrogen's aid, the value of hydrogen power in automobiles for reducing global warming occurrences, and the potential of using SiNSs for hydrogen storage in tandem with other forms of transition and alkali earth materials to meet these difficulties. It demonstrates how catalysts are critical to fixing the current reversibility and desorption problems with hydrogen energy storage. As a result of the analysis, energy suppliers and Si-based fuel cells may be better able to tailor their services to individual customers' needs, which might boost the growth of the hydrogen energy industry.

Understanding electronic structure tunability by metal dopants for promoting MgB2 hydrogenation

Hydrogen is a promising energy carrier, but its onboard application is limited by the need for compact, low-pressure storage solutions. Solid-state complex metal hydride systems, such as MgB2/Mg(BH4)2, offer high storage capacities but suffer from sluggish kinetics and poor reversibility. One avenue for improving reactivity is to introduce metal dopants to alter electronic and atomic properties, but the role of these chemical additives remains poorly understood, particularly for the hydrogenation reaction. In this work, we used density functional theory calculations on model MgB2 systems to rationalize the potential role of metal dopants in destabilizing B–B bonding within the MgB2 lattice. We carried out detailed electronic structure analyses for 28 different metal dopant adatoms to identify properties that contribute to a dopant’s efficacy. Based on the simulation results, we propose that an intermediate ionic and covalent character of the bonds between adatoms and B atoms is desirable for facilitating charge redistribution, disrupting the B–B bond network, and promoting H2 dissociation and H atom chemisorption on MgB2.

Stabilization the interface of NASICON-type solid electrolyte and Li metal by Al interlayer

Solid-state lithium-ion batteries with intrinsic safety and stable performance have emerged as alternative to liquid electrolyte-based systems. NASICON-type Li1.3Al0.3Ti1.7(PO4)3 (LATP) with high ionic conductivity is a promising solid electrolyte to be commercialized. However, the incompatibility of LATP with Li metal hinders its application in high energy density solid-state systems. Herein, we apply a 60 nm thick protective Al layer by PVD to construct a stable interface with metallic Li. The Al-coated LATP enables better electrochemical performance in a symmetric cell than bare LATP. Al-coated LATP is stable at 0.1 mA cm−2 for 100 cycles without building up polarization. The overpotential and the interfacial resistance are significantly reduced as direct contact between Li and LATP is avoided. The Al coating inhibits the reduction of Ti4+ to Ti3+ of LATP pellet during cycling. This work resolves the prominent limitations of LATP and strengthens the interfacial connectivity in solid-state system, pointing an environmental friendly and low cost modification strategy to improve the solid-state lithium-ion batteries.

Solid-state quantum nodes based on color centers and rare-earth ions coupled with fiber Fabry–Pérot microcavities

High-performance optical quantum memories serving as quantum nodes are crucial for the distribution of remote entanglement and the construction of large-scale quantum networks. Notably, quantum systems based on single emitters can achieve deterministic spin-photon entanglement, greatly simplifying the difficulty of constructing quantum network nodes. Among them, optically interfaced spins embedded in solid-state systems, as atomic-like emitters, are important candidate systems for implementing long-lived quantum memory due to their stable physical properties and robustness to decoherence in scalable and compact hardware. To enhance the light-matter-interaction strength, optical microcavities can be exploited as an important tool to generate high-quality spin-photon entanglement for scalable quantum networks. They can enhance the photon collection probability and photon generation rate of specific optical transitions and improve the coherence and spectral purity of emitted photons. For solid-state systems, open Fabry-Pérot cavities can couple single emitters that are not in proximity to the surface, avoiding significant spectral diffusion induced by the interfaces while maintaining the wide tunability, whichenables addressing of multiple single emitters in the frequency and spatial domain within a single device. This review describes the characteristics of single emitters as quantum memories with a comparison to atomic ensembles, the cavity-enhancement effect for single emitters and the advantages of different cavities, especially fiber Fabry-Pérot microcavities. Finally, recent experimental progress on solid-state single emitters coupled with fiber Fabry-Pérot microcavities is reviewed, with a focus on color centers in diamond and silicon carbide, as well as rare-earth dopants.

Low concentration Sm3+ ions loaded zinc sodium borate glasses for solid state lighting devices

Herein, zinc sodium borate glasses containing samarium ions were fabricated using the traditional melt-quenching approach and explored using several spectroscopic and structural methods. The XRD data corroborated the host glass specimen's non-crystalline nature. Scanning electron microscopy and the energy dispersive X-ray spectroscopy method were utilized to study the morphological and homogenous attributes. The UV–Vis–NIR wavelengths of absorption showed a total of seventeen distinct Sm3+ ion peaks. The three transitions 4G5/2 → 6H9/2, 6H7/2, and 6H5/2 are evident in the PL data at wavelengths of 644, 597, and 561 nm, respectively, in the red, reddish-orange, and greenish-yellow zones. The luminescence intensity of the investigated glass specimens increases up to 0.4 mol% Sm3+ ion content thereafter reducing because of the non-radiative transfer of energy. The estimated JO intensity parameters exhibit a trend of Ω2>Ω4>Ω6. The trend of the assessed radiative parameters also demonstrated that they are sensitive to changes in the glass network. The Futchbauer-Ladenburgh theory was used to compute the emission cross-section of various transitions utilizing the radiative parameters. The 1931 CIE chromaticity coordinates assessments corroborate the reddish-orange luminescence from the fabricated glasses. The outcomes have proven that obtained BNZSmx glasses doped with low concentrations of trivalent samarium ions are well suited for reddish-orange solid-state lighting systems.

Physics-Informed Neural Networks for Quantum Control.

Quantum control is a ubiquitous research field that has enabled physicists to delve into the dynamics and features of quantum systems, delivering powerful applications for various atomic, optical, mechanical, and solid-state systems. In recent years, traditional control techniques based on optimization processes have been translated into efficient artificial intelligence algorithms. Here, we introduce a computational method for optimal quantum control problems via physics-informed neural networks (PINNs). We apply our methodology to open quantum systems by efficiently solving the state-to-state transfer problem with high probabilities, short-time evolution, and using low-energy consumption controls. Furthermore, we illustrate the flexibility of PINNs to solve the same problem under changes in physical parameters and initial conditions, showing advantages in comparison with standard control techniques.

Magnon-mediated qubit coupling determined via dissipation measurements.

Controlled interaction between localized and delocalized solid-state spin systems offers a compelling platform for on-chip quantum information processing with quantum spintronics. Hybrid quantum systems (HQSs) of localized nitrogen-vacancy (NV) centers in diamond and delocalized magnon modes in ferrimagnets-systems with naturally commensurate energies-have recently attracted significant attention, especially for interconnecting isolated spin qubits at length-scales far beyond those set by the dipolar coupling. However, despite extensive theoretical efforts, there is a lack of experimental characterization of the magnon-mediated interaction between NV centers, which is necessary to develop such hybrid quantum architectures. Here, we experimentally determine the magnon-mediated NV-NV coupling from the magnon-induced self-energy of NV centers. Our results are quantitatively consistent with a model in which the NV center is coupled to magnons by dipolar interactions. This work provides a versatile tool to characterize HQSs in the absence of strong coupling, informing future efforts to engineer entangled solid-state systems.