Solid-phase Peptide Synthesis Research Articles

Exploring Tryptophan-based Short Peptides: Promising Candidate for Anticancer and Antimicrobial Therapies

Background: Ultra-short peptides are essential therapeutic agents due to their heightened selectivity and reduced toxicity. Scientific literature documents the utilization of dipeptides, tripeptides, and tetrapeptides as promising agents for combating cancer. We have created a range of tryptophan-based peptides derived from literature sources in order to assess their potential as anticancer drugs. Methods: We present the results of our study on the antibacterial and anticancer effectiveness of 10 ultra-short peptides that were produced utilizing microwave-assisted solid phase peptide synthesis. The synthesized peptides underwent screening for in vitro antibacterial activity using the agar dilution method. Results: HPLC, LC-MS, 1H NMR, and 13C NMR spectroscopy were used to analyze the synthesized peptides. In tests using the HeLa and MCF-7 cell lines, the synthesized peptides' anticancer efficacy was assessed. The study found that two peptides showed potential median inhibitory concentration (IC50) values of 3.9±0.13 μM and 1.8±0.09 μM, respectively, and showed more activity than the reference medication doxorubicin. Conclusion: The antibacterial activity of synthesized peptides 3b and 4b was found to be better than the other synthetic peptides. MIC value of roughly 5–50 μg/mL for peptides 3a, 4c, and 4d showed strong antifungal activity against Candida albicans. The synthesized peptides were also evaluated for their anticancer activity against HeLa and MCF-7 cell lines, and found that peptides 3e and 4e were more potent than other peptides against doxorubicin.

Synthesis, antimicrobial activity, and mechanistic studies of enterocin DD14, a leaderless two-peptide bacteriocin

Bacteriocins are promising alternatives to antibiotics in the food, veterinary and medical sectors, but their study and use is often hampered by the low yields and high costs associated with their purification from naturally occurring bacteria. Chemical synthesis has emerged as a means to overcome this limitation and design more active variants. In this study, microwave-assisted solid-phase peptide synthesis was used to produce the leaderless two-peptide bacteriocin enterocin DD14 (EntDD14), composed of EntDD14A (44 amino acids) and EntDD14B (43 amino acids). The resulting synthetic peptides, syn-EntDD14A and syn-EntDD14B, were tested against Gram-positive bacteria including Listeria, Staphylococcus and Enterococcus strains. Both peptides were found to be necessary for optimal, but not synergistic, antibacterial activity and to act through a pore-forming mechanism. Both peptides exhibited moderate cytotoxicity against eukaryotic cells.

Synthesis of a 13C/2H Labeled Building Block to Probe the Phosphotyrosine Interactome Using Biomolecular NMR Spectroscopy.

Phosphotyrosine (pTyr) recognition coordinates the assembly of protein complexes, thus controlling key events of cell cycle, cell development and programmed cell death. Although many aspects of membrane receptor function and intracellular signal transduction have been deciphered in the last decades, the details of how phosphorylation alters protein-protein interaction and creates regulating switches of protein activity and localization often remains unclear. We developed a synthetic route to a protected phophotyrosine building block with isolated 13C-1H spins in the aromatic ring. The compound can be used for solid phase peptide synthesis (SPPS) and readily applied to study affinity, dynamics and interactions on an atomic level using NMR spectroscopy. As a first example, we prepared an isotopologue of a pTyr containing 12mer peptide (pY1021) as part of the platelet-derived growth factor to analyze the binding to the phospholipase C-γ (PLCγ-1) SH2 domain.

Mixed Stereochemistry Macrocycle Acts as a Helix-Stabilizing Peptide N-Cap.

Interactions between proteins and α-helical peptides have been the focus of drug discovery campaigns. However, the large interfaces formed between multiple turns of an α-helix and a binding protein represent a significant challenge to inhibitor discovery. Modified peptides featuring helix-stabilizing macrocycles have shown promise as inhibitors of these interactions. Here, we tested the ability of N-terminal to side-chain thioether-cyclized peptides to inhibit the α-helix binding protein Mcl-1, by screening a trillion-scale library. The enriched peptides were lariats featuring a small, four-amino-acid N-terminal macrocycle followed by a short linear sequence that resembled the natural α-helical Mcl-1 ligands. These "Heliats" (helical lariats) bound Mcl-1 with tens of nM affinity, and inhibited the interaction between Mcl-1 and a natural peptide ligand. Macrocyclization was found to stabilize α-helical structures and significantly contribute to affinity and potency. Yet, the 2nd and 3rd positions within the macrocycle were permissible to sequence variation, so that a minimal macrocyclic motif, of an N-acetylated d-phenylalanine at the 1st position thioether connected to a cysteine at the 4th, could be grafted into a range of peptides and stabilize helical conformations. We found that d-stereochemistry is more helix-stabilizing than l- at the 1st position in the motif, as the d-amino acid can utilize polyproline II torsional angles that allow for more optimal intrachain hydrogen bonding. This mixed stereochemistry macrocyclic N-cap is synthetically accessible, requiring only minor modifications to standard solid-phase peptide synthesis, and its compatibility with peptide screening can provide ready access to helix-focused peptide libraries for de novo inhibitor discovery.

Integrating 3,4-Dihydro-2H-1,4-oxazine into Peptides as a Modification: Silver Triflate-Catalyzed Cyclization of N-Propargyl N-Sulfonyl Amino Alcohols for SPPS Applications.

We present a methodology yielding 3,4-dihydro-2H-1,4-oxazine by cyclization of N-propargyl N-sulfonyl amino alcohols using silver triflate as a catalyst at ambient temperature. Additionally, we showcase the applicability of this methodology in solid phase peptide synthesis (SPPS) to introduce the oxazine heterocyclic ring into short peptides containing serine and threonine. Notably, Rink amide resin supported the on-resin formation of 3,4-dihydro-2H-1,4-oxazine, while 2-CTC resin facilitated the oxazine formation in a one-pot process involving peptide cleavage, deprotection, and subsequent C-O ring formation, thus offering a versatile method for the late-stage modification of peptides.

Stabilization of 310-Helices in Macrocycles Using Dominant Rotor Methodology.

Stabilization of biologically relevant structural motifs has been a long-standing challenge. Here we show that atropisomeric dominant rotors can stabilize rare 310-helices in macrocycles. The target molecules were prepared using solid-phase peptide synthesis and subjected to extensive structural analysis. Molecular dynamics (MD) simulations enabled us to acquire solution structures for the target molecules, which offered evidence for stable 310-helix formation, ordinarily a metastable state. The 310-helices were shown to retain helicity after heating to 100 °C for 72 h. Moreover, the crude atropisomeric mixtures could be thermally enriched toward 310-helical macrocycles with selectivities of >20:1.

Selective Activation of Peptide-Thioester Precursors for Templated Native Chemical Ligations.

Chemical protein synthesis enables access to proteins that would otherwise be difficult or impossible to obtain with traditional means such as recombinant expression. Chemoselective ligations provide the ability to join peptide segments prepared by solid-phase peptide synthesis. While native chemical ligation (NCL) is widely used, it is limited by the need for C-terminal thioesters with suitable reaction kinetics, properly placed native Cys or thiolated derivatives, and peptide segment solubility at low mM concentrations. Moreover, repetitive purifications to isolate ligated products are often yield-sapping, hampering efficiency and progress. In this work, we demonstrate the use of Controlled Activation of Peptides for Templated NCL (CAPTN). This traceless multi-segment templated NCL approach permits the one-pot synthesis of proteins by harnessing selective thioester activation and orthogonal conjugation chemistries to favor formation of full-length ligated product while minimizing side reactions. Importantly, CAPTN provides kinetic enhancements allowing ligations at sterically hindered junctions and low peptide concentrations. Additionally, this one-pot approach removes the need for intermediate purification. We report the synthesis of two E.coli ribosomal subunits S16 and S17 enabled by the chemical tools described herein. We anticipate that CAPTN will expedite the synthesis of valuable proteins and expand on templated approaches for chemical protein synthesis.

Class IIb Microcin MccM Interferes with Oxidative Phosphorylation in Escherichia coli.

Dysbiosis of the human gut microbiota is linked to numerous diseases. Understanding the molecular mechanisms by which microbes interact and compete with one another is required for developing successful strategies to modulate the microbiome. The natural product Microcin M (MccM) consists of a 77-residue bioactive peptide conjugated to a siderophore and is a class II microcin involved in microbial competition with an enigmatic mode-of-action. In this work, we investigated the basis for MccM activity and leveraged bioinformatics to expand the known chemical diversity of class II microcins. We applied automated fast-flow solid phase peptide synthesis coupled with chemoenzymatic chemistry to acquire MccM and demonstrated that its activity was bacteriostatic. We then used our synthetic molecule to ascertain that catecholate siderophore transporters in Escherichia coli K-12 are necessary for MccM import. Once inside the cell, we found that MccM treatment decreased the levels of intracellular ATP and interfered with gene expression. These effects were ameliorated in genetic mutants lacking ATP synthase or in conditions that support substrate-level phosphorylation. Further, we showed that MccM elevated the levels of reactive oxygen species within the target cell. We propose that MccM effects its bacteriostatic activity by decreasing the total energy level of the cell through inhibition of oxidative phosphorylation. Lastly, using genome mining, we bioinformatically identified 171 novel putative class II microcins. Our investigation sheds light on the natural processes involved in microbial competition and provides inspiration, in the form of new molecules, for future therapeutic endeavors.

Brønsted Acid-Lewis Acid (BA-LA) Induced Final Deprotection/Peptide Resin Cleavage in Fmoc/t-Bu Solid-Phase Peptide Synthesis: HCl/FeCl3 and AcOH/FeCl3 as Viable PFAS-Free Alternatives for TFA.

The widely used Fmoc/t-Bu solid-phase peptide synthesis (SPPS) is hampered by relying on corrosive, per/polyfluoroalkyl substance (PFAS) classified trifluoroacetic acid (TFA) as a universal protecting group (PG) removal/resin cleavage reagent. We report that suitable combinations of Brønsted acids (BAs) and Lewis acids (LAs) such as HCl/FeCl3 and AcOH/FeCl3 constitute viable alternatives for TFA as PFAS-free cleavage agents. Using water miscible dimethyl carbonate (DMC) and acetonitrile (MeCN) as solvents enabled diluting cleavage mixtures with suitable aqueous solutions, allowing for direct use in purification in which removal of >99.99% iron from an HCl/FeCl3 induced cleavage was demonstrated.

Solid-phase synthesis of amphiphilic cyclic peptides as a surfactin mimetic

The cyclic lipopeptide surfactin, an anionic biosurfactant, has received increased interest owing to its unique characteristics and promising applications. Although surfactin is known to exhibit distinctive surface activities and self-assembly ability, the role of the cyclic peptide moiety in its physico-chemical properties requires further investigation. Here, we report the solid-phase peptide synthesis of surfactin mimics such as cyclic heptapeptides with the same amino acid sequence as surfactin (CSF) and cyclic octapeptides with dodecyl chains (CSF12). The structure–property relationships of the cyclic peptides were then examined. The acidic forms of CSF and CSF12 were poorly soluble in water, but the addition of 1.5 or 2.0 equiv. of NaOH increased their solubility in aqueous solutions. The disodium salt of CSF (CSF-2Na) reduced the surface tension of water to 39.0 mN/m despite its absence of a long alkyl chain, indicating that the cyclic peptide moiety plays a crucial role in the surface activity of the surfactin mimic. In the case of the disodium salt of CSF12 (CSF12–2Na), the introduction of a dodecyl chain to the cyclic peptide moiety led to an increase in molecular orientation such that saturation at the air–water interface was observed. Thus, a long alkyl chain enhances the molecular assembly of the cyclic peptide at the air–water interface. The introduction of a long alkyl chain also enhanced the solubilisation of phospholipids. For instance, CSF12–1.5Na induced the solubilisation of L-α-dimyristoylphosphatidylcholine (DMPC) multilamellar vesicles in phosphate-buffered saline (PBS). These findings greatly contribute to the fundamental understanding of the broad spectrum of physico-chemical properties and biological activities of bio-derived cyclic peptides. Furthermore, these insights can also be helping design libraries for developing cyclic peptides for challenging therapeutics in skin disease or as cosmeceuticals to enhance skin appearance.

Effective Immobilization of Novel Antimicrobial Peptides via Conjugation onto Activated Silicon Catheter Surfaces.

Antibiotic-resistant microorganisms have become a serious threat to public health, resulting in hospital infections, the majority of which are caused by commonly used urinary tract catheters. Strategies for preventing bacterial adhesion to the catheters' surfaces have been potentially shown as effective methods, such as coating thesurface with antimicrobial biomolecules. Here, novel antimicrobial peptides (AMPs) were designed as potential biomolecules to prevent antibiotic-resistant bacteria from binding to catheter surfaces. Thiolated AMPs were synthesized using solid-phase peptide synthesis (SPPS), and prep-HPLC was used to obtain AMPs with purity greater than 90%. On the other side, the silicone catheter surface was activated by UV/ozone treatment, followed by functionalization with allyl moieties for conjugation to the free thiol group of cystein in AMPs using thiol-ene click chemistry. Peptide-immobilized surfaces were found to become more resistant to bacterial adhesion while remaining biocompatible with mammalian cells. The presence and site of conjugation of peptide molecules were investigated by immobilizing them to catheter surfaces from both ends (C-Pep and Pep-C). It was clearly demonstrated that AMPs conjugated to the surface via theirN terminus have a higher antimicrobial activity. This strategy stands out for its effective conjugation of AMPs to silicone-based implant surfaces for the elimination of bacterial infections.

Multimaterial 3D Laser Printing of Cell-Adhesive and Cell-Repellent Hydrogels.

Here, a straightforward method is reported for manufacturing 3D microstructured cell-adhesive and cell-repellent multimaterials using two-photon laser printing. Compared to existing strategies, this approach offers bottom-up molecular control, high customizability, and rapid and precise 3D fabrication. The printable cell-adhesive polyethylene glycol (PEG) based material includes an Arg-Gly-Asp (RGD) containing peptide synthesized through solid-phase peptide synthesis, allowing for precise control of the peptide design. Remarkably, minimal amounts of RGD peptide (<0.1wt%) suffice for imparting cell-adhesiveness, while maintaining identical mechanical properties in the 3D printed microstructures to those of the cell-repellent, PEG-based material. Fluorescent labeling of the RGD peptide facilitates visualization of its presence in cell-adhesive areas. To demonstrate the broad applicability of the system, the fabrication of cell-adhesive 2.5D and 3D structures is shown, fostering the adhesion of fibroblast cells within these architectures. Thus, this approach allows for the printing of high-resolution, true 3D structures suitable for diverse applications, including cellular studies in complex environments.

Synthesis and Thermodynamic Evaluation of Sialyl-Tn MUC1 Glycopeptides Binding to Macrophage Galactose-Type Lectin.

Interactions between the tumor-associated carbohydrate antigens of Mucin 1 (MUC1) and the carbohydrate-binding proteins, lectins, often lead to the creation of a pro-tumor microenvironment favoring tumor initiation, progression, metastasis, and immune evasion. Macrophage galactose binding lectin (MGL) is a C-type lectin receptor found on antigen-presenting cells that facilitates the uptake of carbohydrate antigens for antigen presentation, modulating the immune response homeostasis, autoimmunity, and cancer. Considering the crucial role of tumor-associated forms of MUC1 and MGL in tumor immunology, a thorough understanding of their binding interaction is essential for it to be exploited for cancer vaccine strategies. The synthesis of MUC1 glycopeptide models carrying a single or multiple Tn and/or sialyl-Tn antigen(s) is described. A novel approach for the sialyl-Tn threonine building block suitable for the solid phase peptide synthesis was developed. The thermodynamic profile of the binding interaction between the human MGL and MUC1 glycopeptide models was analyzed using isothermal titration calorimetry. The measured dissociation constants for the sialyl-Tn-bearing peptide epitopes were consistently lower compared to the Tn antigen and ranged from 10 μM for mono- to 100 nM for triglycosylated MUC1 peptide, respectively. All studied interactions, regardless of the glycan's site of attachment or density, exhibited enthalpy-driven thermodynamics.

Condensation domain editing of the FR900359 assembly line yields a novel analog amenable to late-stage functionalization.

The natural product FR900359 (FR) has generated significant attention lately, due to its characteristics as potent and selective inhibitor of Gq/11 mediated signal transduction of associated G protein-coupled receptors (GPCRs). This makes FR both a widely used pharmacological tool compound and a lead molecule for targeted cancer therapy. The exploration of structure-activity-relationship (SAR) of the scaffold by total synthesis has been complicated by its structural complexity and its incompatibility with standard approaches of solid-phase peptide synthesis. Options for late-stage functionalization of FR are limited due to a lack of tractable functional groups. Here we present a mixed approach combining i) genetic engineering of the FR-assembly line in Chromobacterium vaccinii, to obtain a novel FR analog featuring a primary amine, with ii) its subsequent synthetic modification and biological profiling for further SAR exploration of the FR scaffold.

Inclusion of TAT and NLS sequences in lipopeptide molecules generates homogenous nanoparticles for gene delivery applications

PurposesThe objective of this study is to develop a versatile gene carrier based on lipopeptides capable of delivering genetic material into target cells with minimal cytotoxicity. MethodsTwo lipopeptide molecules, palmitoyl-CKKHH and palmitoyl-CKKHH-YGRKKRRQRRR-PKKKRKV, were synthesized using solid phase peptide synthesis and evaluated as transfection agents. Physicochemical characterization of the lipopeptides included a DNA shift mobility assay, particle size measurement, and transmission electron microscopy (TEM) analysis. Cytotoxicity was assessed in CHO-K1 and HepG2 cells using the MTT assay, while transfection efficiency was determined by evaluating the expression of the green fluorescent protein-encoding gene. ResultsOur findings demonstrate that the lipopeptides can bind, condense, and shield DNA from DNase degradation. The inclusion of the YGRKKRRQRRR sequence, a transcription trans activator, and the PKKKRKV sequence, a nuclear localization signal, imparts desirable properties. Lipopeptide-based TAT-NLS/DNA nanoparticles exhibited stability for up to 20 days when stored at 6–8 °C, displaying uniformity with a compact size of approximately 120 nm. Furthermore, the lipopeptides exhibited lower cytotoxicity compared to the poly-L-lysine. Transfection experiments revealed that protein expression mediated by the lipopeptide occurred at a charge ratio ranging from 4.0 to 8.0. ConclusionThese results indicate that the lipopeptide, composed of a palmitoyl alkyl chain and TAT and NLS sequences, can efficiently condense and protect DNA, form stable and uniform nanoparticles, and exhibit promising characteristics as a potential gene carrier with minimal cytotoxicity.

The GA-Hecate Peptide inhibits the ZIKV Replicative Cycle in Different Steps and can Inhibit the Flavivirus NS2B-NS3 Protease after Cell Infection.

Peptide drugs are advantageous because they are subject to rational design and exhibit highly diverse structures and broad biological activities. The NS2B-NS3 protein is a particularly promising flavivirus therapeutic target, with extensive research on the development of inhibitors as therapeutic candidates, and was used as a model in this work to determine the mechanism by which GA-Hecate inhibits ZIKV replication. The present study aimed to evaluate the potential of GA-Hecate, a new antiviral developed by our group, against the Brazilian Zika virus and to evaluate the mechanism of action of this compound on the flavivirus NS2B-NS3 protein. Solid-phase peptide Synthesis, High-Performance Liquid Chromatography, and Mass Spectrometry were used to obtain, purify, and characterize the synthesized compound. Real-time and enzymatic assays were used to determine the antiviral potential of GA-Hecate against ZIKV. The RT-qPCR results showed that GA-Hecate decreased the number of ZIKV RNA copies in the virucidal, pre-treatment, and post-entry assays, with 5- to 6-fold fewer RNA copies at the higher nontoxic concentration in Vero cells (HNTC: 10 μM) than in the control cells. Enzymatic and kinetic assays indicated that GA-Hecate acts as a competitive ZIKV NS2B-NS3 protease inhibitor with an IC50 of 32 nM and has activity against the yellow fever virus protease. The results highlight the antiviral potential of the GA-Hecate bioconjugate and open the door for the development of new antivirals.

Human estrogen receptor alpha (ERα) targeted cyclic peptides inhibit cell growth and induce apoptosis in MCF-7 cells

Abstract Objectives Human estrogen receptor alpha (ERα) is considered an important target, especially in the treatment of breast cancer, as it has a vital role in cancer development. ERα-targeted therapies generally target the ligand binding domain (LBD) of ERα. However, over time, cells develop resistance to this mechanism alternative approaches to inhibit ERα activity target ERα–DNA or ERα–cofactor interactions. Inhibitors of ERα–cofactor interactions are designed by targeting the hydrophobic hollow region of the receptor box LXXLL motif. Methods In this context, helix-stabilized cyclic peptides (SPs) designed with in silico approaches were obtained by solid phase peptide synthesis. The effects of SPs on MCF-7 cells were examined with MTT and ATP, and qPCR and flow cytometry were used for further analysis. Results Our results demonstrated that the SPs were effective only in MCF-7 cells expressing ERα. In addition, cyclic peptide combinations (SPCs) showed anti-proliferative and toxic effects on MCF-7 cells. The impact of SPCs with the highest inhibitory effect in MCF-7 cells on ERα-related genes and markers of apoptosis was revealed. Moreover, the flow cytometry analysis result used to examine apoptotic cells proved the apoptosis of SPCs in MCF-7 cells. Conclusions These findings suggest that our novel SPs, which inhibit coactivator interactions of ERα, induce apoptosis of MCF-7 cells. Thus, considering this strong effect of SPs in the inhibition of receptors, it is pointed out that they can be further developed as an alternative to current clinical treatments or as an auxiliary approach in the generating of new targeted peptide-based therapies.

Human Biodistribution and Radiation Dosimetry of the Targeting Fibroblast Growth Factor Receptor 1-Positive Tumors Tracer [68Ga]Ga-DOTA-FGFR1-Peptide.

Objective: [68Ga]Ga-DOTA-FGFR1-peptide is a novel positron emission tomography (PET) radiotracer targeting fibroblast growth factor receptor 1 (FGFR1). This study aimed to evaluate the safety, biodistribution, radiation dosimetry, and imaging potential of [68Ga]Ga-DOTA-FGFR1-peptide. Methods: The FGFR1-targeting peptide DOTA-(PEG2)-KAEWKSLGEEAWHSK was synthesized by manual solid-phase peptide synthesis and high-performance liquid chromatography purification, and labeled with 68Ga with DOTA as chelating agent. We recruited 14 participants and calculated the radiation dose of 4 of these pathologically confirmed nontumor subjects using OLINDA/EXM 2.2.0 software. At the same time, the imaging potential in 10 of these lung cancer patients was evaluated. Results: The biodistribution of [68Ga]Ga-DOTA-FGFR1-peptide in 4 subjects showed the highest uptake in the bladder and kidney. Dosimetry analysis indicated that the bladder wall received the highest effective dose (3.73E-02 mSv/MBq), followed by the lungs (2.36E-03 mSv/MBq) and red bone marrow (2.09E-03 mSv/MBq). No normal organs were found to have excess specific absorbed doses. The average systemic effective dose was 4.97E-02 mSv/MBq. The primary and metastatic tumor lesions were clearly visible on PET/computed tomography (CT) images in 10 patients. Conclusion: Our results indicate that [68Ga]Ga-DOTA-FGFR1-peptide has a good dosimetry profile and can be used safely in humans, and it has significant potential value for clinical PET/CT imaging.

Bioproduction Platform to Generate Functionalized Disulfide-Constrained Peptide Analogues.

Disulfide-constrained peptides (DCPs) have gained increased attention as a drug modality due to their exceptional stability and combined advantages of large biologics and small molecules. Chemical synthesis, although widely used to produce DCPs, is associated with high cost, both economically and environmentally. To reduce the dependence on solid phase peptide synthesis and the negative environmental footprint associated with it, we present a highly versatile, low-cost, and environmentally friendly bioproduction platform to generate DCPs and their conjugates as well as chemically modified or isotope-labeled DCPs. Using the DCP against the E3 ubiquitin ligase Zinc and Ring Finger 3, MK1-3.6.10, as a model peptide, we have demonstrated the use of bacterial expression, combined with Ser ligation or transglutaminase-mediated XTEN ligation, to produce multivalent MK1-3.6.10 and MK1-3.6.10 with N-terminal functional groups. We have also developed a bioproduction method for the site-specific incorporation of unnatural amino acids into recombinant DCPs by the amber codon suppression system. Lastly, we produced 15N/13C-labeled MK1-3.6.10 with high yield and assessed the performance of a semiautomated resonance assignment workflow that could be used to accelerate binding studies and structural characterization of DCPs. This study provides a proof of concept to generate functionalized DCPs using bioproduction, providing a potential solution to alleviate the reliance on hazardous chemicals, reduce the cost, and expedite the timeline for DCP discovery.

Hypervalent Iodine Amino Acid Building Blocks for Bioorthogonal Peptide Macrocyclization

AbstractEthynylbenziodoxol(on)es (EB(X)xs) reagents have emerged as useful reagents for peptide/protein modification due to their versatile reactivity and high selectivity. Herein, we report the successful introduction of ethynylbenziodoxoles (EBxs) on different amino acid building blocks (Lys/Orn/Dap), and show their compatibility with both solid phase peptide synthesis (SPPS) and solution phase peptide synthesis (SPS). The selective incorporation of the EBx core into peptide sequences enable efficient macrocyclizations under mild conditions for the synthesis of topologically unique cyclic and bicyclic peptides.