Bituminous Coal Research Articles

Multiscale Pore Structure Evolution of Different Rank Coals Induced by Chelating Agent Intrusion

Summary China’s coalbed methane (CBM) reservoirs are characterized by low permeability (<1 md). Stimulation with conventional acids is facing the problems of secondary precipitation, high corrosion rates, and fines migration. Chelating agent intrusion was proposed as a promising alternative for conventional acids, while the pore structure evolution induced by it needs to be further clarified. In this study, coal samples with three different ranks were selected and treated with L-glutamic acid N, N-diacetic acid (GLDA). Low-temperature Ar and N2 adsorption tests, mercury intrusion porosimetry (MIP), and scanning electron microscope (SEM) analyses were applied to investigate nanoscale to macroscale pore structure changes. X-ray fluorescence (XRF) spectroscopy tests were conducted to determine the mineralogical change of coal. The results show that chelating agent intrusion can widen fracture width, connect micropores, and create void space in macropores by dissolving carbonate minerals, while the nanoscale pore volumes (PVs) showed a slight decrease due to clay minerals collapse. The fractal dimensions Dm calculated by the MIP results of lignite, bituminous coal, and anthracite coal decreased by 0.2735, 0.1734, and 0.1444, respectively. It is indicated that a pore structure with a diameter of >100 nm of the coal became more unified, which favors the seepage of gas/water. The chelating agent intrusion shows a significant effect on lignite, followed by bituminous and anthracite coal. However, the metal element reduction rate of anthracite coal presents the highest, followed by bituminous coal and lignite. There can be a risk that a long intrusion time would loosen the skeleton of lignite, leading to further reservoir damage. Therefore, bituminous and anthracite coal samples are preferred, as the skeletons of higher-rank coals are more compact. These research findings introduced a potential stimulation method for enhancing CBM recovery and provided references for field application.

Coal-based hard carbon anode for high-performance sodium ion batteries via coal-based graphene oxide as a multi-functional binder

Coal-based hard carbon for sodium ion batteries (SIBs) was successfully prepared using Shenfu bituminous coal (SFC) by one-step pyrolysis method. In the present work, we reported a novel method to fabricate carbon electrodes for SIBs from coal-based hard carbon with coal-based graphene oxide (CGO) as a multi-functional conductive binder to realize dual functional utilization of coal. As compared to traditional binder (CMC), electrodes with the CGO binder exhibits significantly increased reversible capacity and rate capability. This work provides a facile method for coal-based carbon materials used in SIBs.

Effect of oxygen concentration on the heat release behaviour of bituminous coal over the complete spontaneous combustion process

Effect of oxygen concentration on the heat release behaviour of bituminous coal over the complete spontaneous combustion process

Molecular simulation of competitive adsorption of CO2/N2/O2 gas in bituminous coal

The main cause of coal spontaneous combustion is the oxidation and temperature rise of coal. Injecting composite inert gas for fire prevention and extinguishing is one of the important methods to prevent coal spontaneous combustion. A large number of studies have macroscopically investigated the fire prevention and extinguishing effects of CO2/N2 and their synergistic actions. However, there is currently a lack of research at the molecular level on the competitive adsorption mechanism between mixed inert gases (CO2, N2) and O2 molecules in coal. Therefore, this study conducted adsorption experiments using Qian Yingzi(QYZ) bituminous coal and compared them with the simulation data of the Wiser coal model to verify the reliability of the Wiser model. Subsequently, employing grand canonical Monte Carlo (GCMC) and molecular dynamics (MD) methods, the competitive adsorption behavior of different proportions of binary mixed component gases (CO2/O2, CO2/N2, O2/N2) at a temperature of 303.15 K was investigated from five perspectives: adsorption capacity, adsorption selectivity coefficient, potential energy distribution, competitive adsorption heat, and interaction energy. The results indicate that among the competitive component gases, CO2 exhibits the strongest adsorption effect on the entire system, which is closely correlated with the distribution range of adsorption energy sites. The adsorption heat and adsorption amount of CO2 consistently exhibit a negative correlation, whereas the relationship between the adsorption heat of N2 and O2 and the adsorption amount shows a positive correlation. Their adsorption capacities depend on the pressure and the proportion of the two gases. Based on the isothermal adsorption curve of CO2/N2, it is recommended that the gas pressure during actual inert gas injection be less than 2.5 MPa. Under this pressure, the competitive adsorption effect is no longer significant, providing a certain theoretical basis for high-pressure injection. Moreover, the preliminary determination of the optimal injection ratio range is from 4:6–3:7. Furthermore, a systematic logical framework for selecting underground inert gas composition is proposed, and an underground mobile inert gas infusion process is adopted. The actual gas composition for infusion is determined based on cost factors in practical engineering. The research results can provide guidance for the selection of gas injection parameters for mixed inert gas fire prevention and extinguishing in goaf.

Research on the pressure relief law of diamond beaded rope saw cutting seam: a numerical investigation

As a new technology to mitigate the high outburst risk of the low permeability coal seam, it is essential to delve deeper into the law and mechanism of pressure relief associated with the diamond beaded rope saw slotting. The paper presents a numerical calculation model under small size that is based on the superimposed beam theory and the contact surface model. The model is compared with the experimental results of similar models in the laboratory to verify its applicability for simulating the numerical calculation of stress distribution in coal seam cut by diamond beaded rope saw. The study then goes on to investigate the influence of coal seam inclination, working face length, coal seam hardness, and seam advancing distance on the pressure relief effect of diamond beaded rope saw cutting seam under engineering scale. The mechanism of the diamond beaded rope saw cutting seam is also analyzed. The results indicate that the diamond beaded rope saw effectively reduces pressure in low permeability coal seams, with the impact range extending to the slit area. Additionally, stress concentration was observed at the front of the slit. Increasing the inclination of the coal seam, working face length, and advancing distance of the cutting seam enhances the pressure relief effect of the diamond beaded rope saw. The latter two factors’ influence is reflected in the direction along the working face and the direction of mining advance, respectively. The efficacy of pressure relief through this particular method is comparatively better in soft coal than in hard coal. This research is significant in promoting the widespread application of diamond beaded rope saws in the pressure relief of coal seam cutting.

Effect of primary air and coal properties on the formation of fine mode particles during low NOx gasification-combustion of coal in a self-sustaining furnace

Gasification-combustion technology can reduce NOx while the formation characteristics of fine mode PM is unclear. This research studied the impact of the excess air coefficient (αg) of the gasifier and the properties of coal on the formation and evolution of fine mode PM. The experiment was conducted on a self-sustaining furnace consisting of a gasifier where pyrolysis/gasification occurs and a combustion chamber where burnout of gasification gas and char occurs. The results showed that fine mode PM and NOx can be synergistically reduced by optimizing αg during gasification-combustion. A low or high αg can lead to a high furnace temperature in the gasifier or combustion chamber, respectively. Elimination of high temperature is crucial to reduce element vaporization which promotes the formation of fine mode PM. Additionally, an optimized combination of furnace temperature and reducing atmosphere in the gasifier can decrease NOx. The optimal αg was 0.32 for bituminous coal (BC). Fine mode PM generated from gasification-combustion of BC, lean coal (LC), and semi-char (SC) mainly consists of Ca, Si, Fe, and S. The vaporization of element from LC and BC primarily occurs during char combustion in the combustion chamber, while the vaporization of element from SC occurs almost equally in the gasifier and combustion chamber.

Low-carbon fuel reburning for CO2 and NOx reduction in pulverized coal firing system

Using low- or zero-carbon fuels is necessary to reduce CO2 emissions. Gas reburning technology can be applied to existing coal boilers to reduce not only CO2 but also NOx emissions. In this study, we confirmed the gas reburning effect using lab-scale equipment based on the consumption coal used in real-scale boilers, with the aim of practical application. Bituminous coal was used as the reference fuel, and sub-bituminous coal was blended to determine whether coal blending has an effect on NOx emissions. This was conducted to optimize the coal blending ratio and gas reburning technology for NOx emission reduction and quantify the NOx reduction by the two methods. Blending sub-bituminous coal reduced the unburned carbon (UBC) content, because of its high volatile matter content. Moreover, NOx emissions decreased as the ratio of sub-bituminous coal increased. In terms of the reburning effect, although UBCs increased with the addition of methane, NOx emission decreased by up to 96.05 %. The conversion ratio, defined as the NOx formation ratio of the total fuel N injection, was used to separate the NOx reduction effects of the two methods. Thus, gas reburning in the ammonia co-firing system of coal-fired power plants can significantly reduce NOx emissions.

Investigation on the Gas Emission Law of Water-Containing Coal across the Rank Range.

Water commonly occurs in coal reservoirs, and it can block the gas flow channels. This has a significant influence on methane transportation within coal. To reveal the gas emission law of water-containing coal across the rank range, three typical coal samples with different coal ranks covering lignite to anthracite were selected in this work. The initial velocity of gas emission (ΔP) under the effect of moisture was measured, and the combination of scanning electron microscopy and mercury injection method was adopted to study the pores and fracture characteristics within coal. Distribution features of oxygen-containing groups in coal were explored by X-ray photoelectron spectroscopy. The microscopic influence mechanism of the water content on ΔP in coal was also comprehensively elucidated. The experimental results show that the moisture content has an obvious inhibitory effect on the ΔP of coal, but the degree of influence on different coal rank samples was different. As the pore space of anthracite (sample XJ) is developed with numerous gas transportation channels, the ΔP has less changes at the lower moisture content (<4.36%). When the moisture content is >4.36%, a large number of water molecules will band together to form water clusters, hindering the gas release, thus greatly reducing the ΔP. However, the change of lignite (sample SL) shows an inverse trend to that of anthracite. Its ΔP is sensitive to the moisture content due to the small number of pores and low porosity. In addition, a great number of oxygen-containing groups in lignite can also provide good surface hydrophilicity for water molecules, and even a small amount of the moisture content (<3.21%) can block most of the pore and facture channels within coal, leading to the remarkable decrease in ΔP. For bituminous coal (sample ML), the distribution of pores and oxygen-containing groups is the most uniform, and the ΔP decreases linearly with the increase in the moisture content.

Synthesis and characteristics of carbon-based synfuel from biomass and coal powder by synergistic co-carbonization technology

A synergistic co-carbonization method based on the use of corn stalk (CS), wood shavings (WS) and bituminous coal (BC) is proposed as a green and low-cost technology. The preparation parameters included a co-carbonization temperature of 600 °C, a co-carbonization time of 30 min, and a biomass/coal ratio of 4/6. The high calorific value (HCV) and bulk density of the CS/BC synfuel were 29.81 MJ kg−1 and 495 kg m−3, respectively, and those of the WS/BC synfuel were 30.11 MJ kg−1 and 485 kg m−3, respectively. The results indicated that the microcrystalline structure was ordered and that the proportion of the graphitic structure increased during the synergistic co-carbonization process. In addition, the co-carbonization process changed the contents of the functional groups on the surface. The amount of aromatic C–O increased during the synergistic co-carbonization process. Decreases in the O-containing functional groups and increases in the graphitic carbon content in the synfuel demonstrated that the interactions of the biomass volatiles with the bituminous coal generated a more regular structure for the carbon-based synfuel and changed the carbon type of the synfuel. This work provides a mechanism for the biomass and coal interactions occurring during the preparation of carbon-based synfuels.

Study on the influence of different thermal coals on the mixed‐burning characteristics of ventilation air methane and pulverized coal

AbstractTo effectively utilize ventilation air methane (VAM), it is proposed to pass it into the boiler of the coal‐fired power plant for mixed combustion. However, the different types of thermal coal utilized present distinct characteristics when mixed with VAM. In this paper, lignite, bituminous coal, and anthracite are selected to study the CH4 conversion rate, system ignition temperature, and NO emission characteristics of the VAM‐pulverized coal coupled system on a fluidized bed experimental platform. The experimental results show that the ignition temperatures of VAM are 748, 736, and 732 °C when the CH4 concentration is 0.25, 0.5, and 0.75%. After the addition of thermal coal, the ignition temperature decreased significantly. When the CH4 concentration is 0.25%, the ignition temperature of the lignite‐VAM system is the lowest, which is 450 °C. Anthracite has the strongest catalytic effect on CH4 combustion. When the heating rate is 5 °C /min, the reaction rate of CH4 is the fastest in the anthracite‐VAM coupled system. Under laboratory conditions, the peak NO concentration in the coal‐VAM coupled system was lignite &gt; bituminous coal &gt; anthracite at different CH4 concentrations, and the CH4 in VAM had a reducing action on the NO generated during mixed combustion, with a stronger reducing effect observed as the CH4 concentration increased. The results of this study can lay the foundation for the industrial application of the mixed combustion of VAM and thermal coal, and be of great significance for solving the practical problems caused by the change of boiler coal types. © 2024 Society of Chemical Industry and John Wiley &amp; Sons, Ltd.

Influence of plasma breakdown on pores and fractures in bituminous coal: A new characterization method of breakdown energy

Plasma technology has a potential application prospect in the field of coal seam permeability enhancement. However, the relationship between plasma breakdown energy and the improvement effect of coal pores and fractures is lack of in-depth research. This study proposed a novel method for characterizing the plasma breakdown energy, and three testing techniques, namely, particle size distribution, mercury intrusion porosimetry (MIP) and low-field nuclear magnetic resonance (NMR), were utilized to examine the pore and fracture distribution of coal samples obtained from Jiulong Mine under varying breakdown energy conditions. The influence between breakdown energy and pores and fractures development is revealed. The results show that: (1) The degree of coal sample fragmentation increases with the increase of plasma breakdown energy. (2) Different breakdown energy induced the development of different pore distribution patterns. At lower breakdown energy, an increase in the volume of macropores dominates. As the breakdown energy increases, there is a rapid increase in the volume of mesopores, a slight increase in minipores, and the least increase in micropores, indicating that plasma treatment primarily improves pores with diameters greater than 100 nm. The test results of the three techniques were mutually verified. (3) Compared with capacitance energy and voltage, the effective breakdown energy obtained by the integral method has a more significant linear relationship with the particle size distribution, total pore volume, and average pore diameter, indicating that the effective breakdown energy is more suitable for characterizing the crushing effect of plasma. During the plasma breakdown process, the expansion stress and thermal stress formed by the effective breakdown energy exceeded the local tensile strength of coal, leading to the generation and development of pores and fractures, which in turn led to the rupture of the coal body. The larger the breakdown energy, the larger the crushing circle formed around the ion channel, the finer the coal is crushed, and the more pore fractures are developed. These nascent pores and fractures provide channels for gas transport, which is extremely favorable for coal mine gas extraction. The research conclusions provide theoretical support for the application of plasma in fracturing and permeability enhancement in coal seams.

EXPERIMENTAL STUDY ON CREEP LOADING OF POROUS COAL UNDER DIFFERENT INFLUENCING FACTORS

After the gas drainage borehole is formed in the coal seam, its stress deformation process is a creep process without the influence of mining. By arranging boreholes on coal samples and carrying out creep loading test of porous coal through rock mechanics testing machine, the creep process of boreholes in actual coal seams is simulated. The results show that the creep loading test results of drilled coal are quite different from those of conventional loading. Creep loading produces large deformation due to rheological and aging characteristics. Compared with non-porous coal, the yield of drilled coal occurs earlier and the yield platform is wider during creep loading. Also, the larger the borehole diameter, the deeper the borehole depth, and the lower the peak stress. The up dip angle is easier to destroy than the down dip angle. Compared with hard coal, soft coal produces greater deformation under smaller peak stress. The research results have guiding significance for drilling gas drainage in the soft coal seam.

Analysis of the Desorption and Outburst Characteristics of Soft and Hard Coal during Gas Pressure Relief

Analysis of the Desorption and Outburst Characteristics of Soft and Hard Coal during Gas Pressure Relief

Evaluation of Contribution to Greenhouse Gas Reduction and Economic Benefits of Livestock Manure based Solid Fuel

Objectives : In the context where the greenhouse gas (GHG) emissions from livestock manure (LSM) account for more than half of the GHG emissions in the livestock sector, it is necessary to find alternatives to composting due to the decrease in agricultural land. This study aims to calculate the GHG reduction contribution and economic benefits when converting LSM into solid fuel as an alternative to traditional composting.Methods : The study compares the results of converting the entire LSM generated domestically into solid fuel replacing it with hard coal for fuel (HC-F), bituminous coal for raw materials (BC-R), bituminous coal for fuel (BC-F). The GHG reduction contribution is calculated following the domestic GHG inventory methodology, using the IPCC guidelines and the method for calculating carbon emission reduction effects. For the assessment of economic benefits, were evaluated by aggregating the impacts of reducing coal imports and GHG reduction benefits in line with EU-ETS standards. Economic benefits are assessed by combining the effects of avoiding coal imports and the GHG reduction benefits according to the EU-ETS.Results and Discussion : The GHG reduction effect was found to be highest when replacing with HC-F, and this is attributed to the lower heating value and higher GHG emission coefficient of HC-F compared to BC-R, and BC-F, indicating that the substitution with HC-F is most effective in terms of import avoidance. If 20% of the annual coal consumption in 2022 is replaced with solid fuel from LSM, the GHG reduction effects for coal substitution are 1.4% for HC-F, 2.1% for BC-R, and 1.9% for BC-F based on the LSM generation CO&lt;sub&gt;2&lt;/sub&gt; emissions from biomass fuel are considered climate-neutral and are excluded from the national total emissions. Solid fuel from LSM serves as an alternative in addressing the GHG generated during the LSM treatment process, contributing to potential reduction. If all generated LSM is replaced with HC-F, BC-R, or BC-F, there are respective GHG reduction effects of 13,193,591 tGHG, 11,320,572 tGHG, and 11,226,331 tGHG.Conclusion In 2018, the livestock sector accounted for approximately 42% of the GHG emissions in the agricultural sector, totaling 9.4 million tCO&lt;sub&gt;2&lt;/sub&gt; eq. Assuming the complete conversion of LSM into solid fuel for coal substitution, regardless of the type of coal replaced, it offsets the entire GHG emissions from the agricultural sector. Currently, there is limited demand for the conversion of LSM into solid fuel due to a lack of proof and awareness, but with some coal-fired power plants scheduled for partial shutdown and the government considering energy options for LSM, a promising stage is anticipated in the future for the substitution and expanded use of solid fuel from LSM in place of coal in the coal fuel. Although it may not be possible to entirely replace the coal used in power plants and steel mills with solid fuel from LSM, it can be utilized by increasing the proportion of coal blending. However, even if not reported in the national GHG inventory, the treatment of pollutants generated by solid fuel combustion remains an ongoing challenge. As solid fuel becomes more commonplace in the future, a comprehensive assessment of the entire process, including potential environmental impacts throughout the life cycle, will be necessary to establish a basis for GHG reduction measures.

Detailed Characterization of Vitrinite-Rich Subbituminous and Bituminous Coals for Utilization in Carbon Fiber Precursor Production

Detailed Characterization of Vitrinite-Rich Subbituminous and Bituminous Coals for Utilization in Carbon Fiber Precursor Production

Coupling Mechanism of THMC Fields in Crushed Soft Coal with Low Permeability after CO2 Injection and Its Application in CO2-ECBM Technology

Coupling Mechanism of THMC Fields in Crushed Soft Coal with Low Permeability after CO₂ Injection and Its Application in CO₂-ECBM Technology

Impact of N-Methyl-2-pyrrolidone Erosion on Surface Functional Groups and Pore Evolution in Coals of Different Ranks.

In low-permeability coal reservoirs, utilizing the organic solvent N-methyl-2-pyrrolidone (NMP) has emerged as an effective approach to improving the coal pore structure and enhancing coalbed methane productivity. However, the exact mechanisms of how solvent erosion alters functional groups and develops pores remain incompletely understood. This study utilized Fourier transform infrared spectroscopy and low-field nuclear magnetic resonance to assess the impact of NMP on the functional groups and pore structures of lignite, bituminous coal, and anthracite. The results indicate that a 6 h treatment with NMP led to an increased proportion of oxygen-containing functional groups in all coal samples, accompanied by a decrease in hydroxyls and aliphatic hydrocarbons. The aromaticity of the coal samples was enhanced to varying degrees, most notably for lignite. In terms of pore modification, the porosity of lignite and bituminous coal increased by 84.82 and 43.56%, while anthracite experienced a porosity increase of 3.04%, indicating a diminished effectiveness of NMP as the coal rank increased. These findings suggest that NMP selectively dissolves specific organic molecules in coals, thereby enhancing pore connectivity and promoting a transition from micro- to meso- and macropores. These findings highlight the potential of NMP in enhancing coalbed methane production and advance our understanding of the mechanisms behind solvent erosion.

Characteristics of Perimeter Rock Damage in a Bottom-Pumping Roadway under the Influence of Mining Activities and Rational Location Studies: A Case Study

With the aim of determining the damage characteristics and a reasonable positional arrangement of the surrounding rock in a bottom-pumping roadway influenced by mining in a high-gas mine, the boundary equation for the plastic zone of the surrounding rock in a circular roadway under an unequal compressive stress field was adopted to analyze the relationship between the distribution characteristics of the plastic zone of the bottom-pumping roadway and the stability of the rock surrounding the bottom-pumping roadway under different bidirectional stress ratios. This was carried out in the bottom-pumping roadway of the working face of Licun coal mine 3301 as the engineering background, where the nature of the coal seams mined is bituminous coal, and the absolute gas outflow is 0.5 m3/min−1. A numerical simulation was used to analyze the distribution characteristics of the surrounding rock stress and the bidirectional stress ratio, as well as the deformation and damage characteristics of the surrounding rock at different positions in the bottom-pumping roadway. A numerical simulation was applied to analyze the distribution characteristics of the surrounding rock stress and the two-way stress ratio, as well as the deformation and damage characteristics of the rock surrounding the bottom-pumping roadway when the bottom-pumping roadway was arranged in different locations. The results show that, with an increase in the bidirectional stress ratio, the plastic zone of the perimeter rock in the bottom-pumping roadway shows nonuniform “butterfly” distribution characteristics, which seriously affects the stability of the rock on the perimeter of the roadway; the stress on the bottom plate of the working face after excavation can be divided into four areas according to the size of the bidirectional stress ratio and the stress loading and unloading states. In addition, the size of the perimeter rock deformation can be sorted into four areas according to the damage range of the perimeter of the rock plastic zone in the bottom-pumping roadway. The size of the deformation in the surrounding rock can be sorted as follows: unpressurized high-stress ratio &gt; unpressurized stress ratio stable area &gt; pressurized low-stress ratio area &gt; original rock stress ratio area. Accordingly, we found that the reasonable location of the bottom-pumping roadway is arranged at the 15 m position outside the hollow area below the coal pillar, along the limestone upper medium-grained sandstone layer along the bottom. The study’s results were applied to the field. The industrial experiments on the site show that the deformation of the surrounding rock is reasonable when the bottom-pumping roadway is dug along the limestone roof and arranged 15 m outside the fault of the mining hollow area below the coal pillar.

Thermal Behavior of Ceramic Bodies Based on Fly Ash and Smectites

Clay minerals have a great influence on the resulting properties of ceramic bodies. Fly ash as a waste material from burning black coal in power plants is a potentially valuable source of oxides (Al2O3, SiO2 or Fe2O3) for this production. Considering the process of ceramic firing, it is important to understand the thermal behavior of individual ingredients. The thermal behavior of natural smectite minerals (montmorillonite, beidellite, hectorite and nontronite) and their mixtures with added fly ash at different ratios (10%, 30% and 50%) was investigated. The phase analysis was obtained using X-ray diffraction and FT-IR spectroscopy. Under heating to 1200 °C, the structural changes of smectites were divided into four steps including dehydration, dehydroxylation, decomposition and crystallization of new phases. The addition of fly ash caused a shift in the reaction temperatures for all the mentioned phases. These changes were most noticeable for mixtures with hectorite; on the contrary, they were least noticeable for beidellite mixtures. Total mixture mass loss continually decreased with increasing fly ash amount. The obtained experimental thermal data can be applicable not only in the production of ceramic bodies or energy waste processing but also in construction and ensuring the safety of municipal waste landfills.

Nanomechanical behavior of coal with heterogeneous minerals and pores using nanoindentation.

The coal's mechanical properties have a significant influence on mining safety and the mine environment. Preparing a standard sample and conducting repeat mechanical testing are challenging because the coal is primarily soft, fragmented, and rich in developed fractures. This study used nanoindentation technology, combined with X-ray diffraction, small-angle X-ray, a high magnification microscope, and mechanical parameter scale-up analysis, to study the micromechanical of three coals being dominated by heterogeneous components and pores. The results show that load-displacement curves with different maximum loads (50 mN, 100 mN, and 200 mN) all appear the pop-in events, and coal heterogeneity affects the frequency of their occurrence. As the maximum load is increased, pop-in event of DSC appears once each, YW increases from zero to three times and HM decreases from four to two times. The heterogeneity of pore structure has little effect on residual displacement, which is mainly affected by hard minerals, and hard minerals reduce the law that residual displacement increases with the increase in maximum load. The micromechanical parameters of soft coals are mainly affected by large pores, while hard coals are mainly affected by hard minerals. The coal's heterogeneity does not affect the linear relationship between hardness and elastic modulus, but stronger heterogeneity will weaken the linear relationship between fracture toughness and elastic modulus. Compared to the mechanical parameters after scale-up, the values obtained based on nanoindentation are less than 15.588% larger, and the increase in the heterogeneity and hard minerals can make the predicted parameters more accurate. The nanoindentation technique can not only provide an efficient and accurate method for studying the mechanical properties of heterogeneous coal at the nanoscale, an important guide for large-scale coal.