SNEDDS Formulation Research Articles

A Green Approach: Optimization of the UPLC Method Using DoE Software for Concurrent Quantification of Pioglitazone and Dapagliflozin in a SNEDDS Formulation for the Treatment of Diabetes

A Green Approach: Optimization of the UPLC Method Using DoE Software for Concurrent Quantification of Pioglitazone and Dapagliflozin in a SNEDDS Formulation for the Treatment of Diabetes

Optimization of Glibenclamide Loaded Thermoresponsive SNEDDS Using Design of Experiment Approach: Paving the Way to Enhance Pharmaceutical Applicability.

Thermoresponsive self-nanoemulsifying drug delivery systems (T-SNEDDS) offer a promising solution to the limitations of conventional SNEDDS formulations. Liquid SNEDDS are expected to enhance drug solubility; however, they are susceptible to leakage during storage. Even though solid SNEDDS offers a solution to this storage instability, they introduce new challenges, namely increased total dosage and potential for drug trapping within the formulation. The invented T-SNEDDS was used to overcome these limitations and improve the dissolution of glibenclamide (GBC). Solubility and transmittance studies were performed to select a suitable oil and surfactant. Design of Experiments (DoE) software was used to study the impact of propylene glycol and Poloxamer 188 concentrations on measured responses (liquefying temperature, liquefying time, and GBC solubility). The optimized formulation was subjected to an in vitro dissolution study. The optimized T-SNEDDS consisted of Kolliphor EL and Imwitor 308 as surfactants and oil. The optimized propylene glycol and Poloxamer 188 concentrations were 13.7 and 7.9% w/w, respectively. It exhibited a liquefying temperature of 35.0 °C, a liquefying time of 119 s, and a GBC solubility of 5.51 mg/g. In vitro dissolution study showed that optimized T-SNEDDS exhibited 98.8% dissolution efficiency compared with 2.5% for raw drugs. This study presents a promising approach to enhance pharmaceutical applicability by resolving the limitations of traditional SNEDDS.

Development and Characterization of Olaparib-Loaded Solid Self-Nanoemulsifying Drug Delivery System (S-SNEDDS) for Pharmaceutical Applications.

This study aims to enhance the solubility of Olaparib, classified as biopharmaceutical classification system (BCS) class IV due to its low solubility and bioavailability using a solid self-nanoemulsifying drug delivery system (S-SNEDDS). For this purpose, SNEDDS formulations were created using Capmul MCM as the oil, Tween 80 as the surfactant, and PEG 400 as the co-surfactant. The SNEDDS formulation containing olaparib (OLS-352), selected as the optimal formulation, showed a mean droplet size of 87.0 ± 0.4 nm and drug content of 5.53 ± 0.09%. OLS-352 also demonstrated anticancer activity against commonly studied ovarian (SK-OV-3) and breast (MCF-7) cancer cell lines. Aerosil® 200 and polyvinylpyrrolidone (PVP) K30 were selected as solid carriers, and S-SNEDDS formulations were prepared using the spray drying method. The drug concentration in S-SNEDDS showed no significant changes (98.4 ± 0.30%, 25℃) with temperature fluctuations during the 4-week period, demonstrating improved storage stability compared to liquid SNEDDS (L-SNEDDS). Dissolution tests under simulated gastric and intestinal conditions revealed enhanced drug release profiles compared to those of the raw drug. Additionally, the S-SNEDDS formulation showed a fourfold greater absorption in the Caco-2 assay than the raw drug, suggesting that S-SNEDDS could improve the oral bioavailability of poorly soluble drugs like olaparib, thus enhancing therapeutic outcomes. Furthermore, this study holds significance in crafting a potent and cost-effective pharmaceutical formulation tailored for the oral delivery of poorly soluble drugs.

Quality by Design Optimization of Telmisartan-loaded Self-nanoemulsifying Drug Delivery Systems

Aim: This study aimed to develop a QbD-based SNEDDS for Telmisartan to enhance its biopharmaceutical performance. Background: Quality by Design (QbD) was incorporated by selecting the Critical Process Pa-rameters (CPPs) as influential variables upon the desired responses. Using Design of Experiments (DoE) software, oil, and S/CoS were tested for pre-isotropic compatibility and formulation im-provement. A heating-cooling cycle and phase separation were used to determine the formula-tions' dispersibility, self-emulsifying time, mean globule size, and stability. Objective: Using Design of Experiments (DoE) software, oil (Capmul MCM C-10) and surfactant (Labrasol)/co-surfactant (Tween-20, and PEG-600) (S/CoS) ratios were optimized for pre-isotropic compatibility and formulation improvement. Methods: Aerosil-200, Sylysia-350, 550, and 730 were used as porous carriers, and Neusilin US2 as an adsorbing agent resulted in free-flowing granules of self-nano emulsifying drug delivery systems. The SNEDDS was further formulated into tablets using a direct compression technique with enhanced disintegration properties. Results: The prepared SNEDDS tablets exhibited a 71% increase in drug dissolution as compared to the pure drug and marketed formulation after the in vitro dissolution studies. Conclusion: This QbD approach offers a promising strategy for developing SNEDDS formula-tions for poorly soluble drugs like Telmisartan.

DEVELOPMENT AND OPTIMIZATION OF SUPER SATURABLE SELF-NANO EMULSIFYING DRUG DELIVERY SYSTEM FOR DASATINIB BY DESIGN OF EXPERIMENT

Objective: In current research, Self-Nanoemulsifying Super Saturable Drug Delivery Systems S‑SNEDDS was formulated to attain superior drug dissolution and stability. Methods: Using saturated solubility, capryol ® 90, cremophor®-EL, and transcutol HP were used to make S-SNEDDS. Its composition was optimized using the ternary phase diagram. Using the central composite design of Response Surface Methodology, dasatinib-SNEDDS developed responses for droplet size (Y1), polydispersity index (Y2), and % drug released in 15 min (Y3). Various Precipitation Inhibitors were added to optimize SNEDDS (S3) to make S-SNEDDS and evaluate. Results: The optimum formulation was S3, with a particle size of 128 nm and zeta potential of-21 mV. Methylcellulose was shown better supersaturation than other inhibitors. The optimized formulation (F3) was more stable than ordinary SNEDDS due to its more significant zeta potential (-25 mV) and lower particle size (128 nm). Dasatinib was shown to be amorphous in S-SNEDDS using Differential Scanning Calorimetry and X-ray Powder Diffraction. F3 had a higher 90 min release rate (>99%) than pure drug dispersion (26%) and SNEDDS formulation (95%). Conclusion: The results concluded that S-SNEDDS formulation successfully enhanced the dissolution and stability of dasatinib.

Combination of co-amorphization with SNEDDS outperforms Ofev® in the oral absorption of nintedanib

Nintedanib (NTD), approved for the treatment of idiopathic pulmonary fibrosis and advanced non-small cell lung cancer, is one of brick dusts with high melting point. Although NTD has been marketed as Ofev®, a soft capsule of NTD ethanesulfonate (NTD-ESA) suspended in oil components, the oral bioavailability is quite low and highly variable. To improve the oral absorption behavior of NTD, we prepared SNEDDS formulation containing NTD-(+)-10-camphorsulfonic acid (CSA) complex with 2% HPMCP-50. CSA disrupted the high crystallinity of NTD-ESA and the formed complex, NTD-CSA, was found to be amorphous by DSC and XRPD. NTD-CSA provided solubilities in various vehicles much higher than NTD-ESA. Under the gastric luminal condition, NTD-CSA SNEDDS with or without 2% HPMCP-50 and NTD-CSA powder indicated very good dissolution of NTD from early time periods, while NTD was gradually dissolved until around 60 min from NTD-ESA and Ofev®. Under the small intestinal luminal condition, in contrast, both NTD-CSA SNEDDS formulations almost completely dissolved NTD throughout the experiments, while Ofev®, NTD-CSA, and NTD-ESA exhibited a very poor dissolution of NTD. In the in vivo absorption study, NTD-CSA SNEDDS with 2% HPMCP-50 significantly improved NTD absorption and reduced the inter-individual variation in oral absorption behavior compared with Ofev®.

Isotretinoin self-nano-emulsifying drug delivery system: Preparation, optimization and antibacterial evaluation

PurposeIsotretinoin (ITN) is a poorly water-soluble drug. The objective of this study was to design a successful liquid self-nanoemulsifying drug delivery system (L-SNEDDS) for ITN to improve its solubility, dissolution rate, and antibacterial activity. MethodsAccording to solubility and emulsification studies, castor oil, Cremophor EL, and Transcutol HP were selected as system excipients. A pseudo ternary phase diagram was constructed to reveal the self-emulsification area. The developed SNEDDS were visually assessed, and the droplet size was measured. In vitro release studies and stability studies were conducted. The antimicrobial effectiveness against multiple bacterial strains, including Staphylococcus aureus, methicillin-resistant Staphylococcus aureus (MRSA), and different accessory gene regulator (Agr) variants were investigated for the optimum ITN-loaded SNEDDS formulation. ResultsCharacterization studies showed emulsion homogeneity and stability (%T 95.40–99.20, A graded) with low droplet sizes (31.87 ± 1.23 nm–115.47 ± 0.36 nm). It was found that the developed ITN-SNEDDS provided significantly a higher release rate (>96 % in 1 h) as compared to the raw drug (<10 % in 1 h). The in vitro antimicrobial activities of pure ITN and ITN-loaded SNEDDS demonstrated a remarkable inhibitory effect on bacterial growth with statistically significant findings (p < 0.0001) for all tested strains when treated with ITN-SNEDDS as compared to the raw drug. ConclusionThese outcomes suggested that SNEDDS could be a potential approach for improving solubility, dissolution rates, and antibacterial activity of ITN.

Formulation and Assessment of Lipid-based Nanoformulation of Luliconazole

The luliconazole preformulation study aimed to determine the best way to administer medicine using SNEDDS. The plain white powder, luciconazole, showed a number of different crystal structures and was very soluble in isopropyl myristate and oleic acid, as confirmed through partition coefficients in n-octanol. With a robust linear standard curve at 295 nm, UV spectroscopy verified its dependability for analysis. Luliconazole and the necessary excipients for SNEDDS formulation were found to be compatible according to fourier-transform infrared spectroscopy (FTIR) spectra. Using a 32-factorial design enhanced the efficacy and stability of SN-7 batches, especially when diluted with water. Thermal studies revealed formulation dynamics-critical thermal behaviors and crystalline structures (DSC and XRD). The end SNEDDS showed a strong suppression of Candida albicans growth and a higher viscosity, allowing for longer surface retention. Ethical approval facilitated comparative evaluations against a commercial formulation. High-performance liquid chromatography (HPLC) analysis validated SN-7’s purity, enabling a benchmark for monitoring luliconazole plasma concentrations post-application and ex-vivo permeation studies, vital for potential fungal infection treatments. A rigorous three-month stability study affirmed SN-7’s unwavering properties across diverse environmental conditions, ensuring sustained effectiveness. An IEAC-approved skin irritation study on albino wistar rats endorsed SN-7’s minimal irritancy, underscoring its safety and comfort, which is pivotal for pharmaceutical acceptance in topical drug delivery.

Formulation Development of Solid Self-Nanoemulsifying Drug Delivery Systems of Quetiapine Fumarate via Hot-Melt Extrusion Technology: Optimization Using Central Composite Design.

Quetiapine fumarate (QTF) was approved for the treatment of schizophrenia and acute manic episodes. QTF can also be used as an adjunctive treatment for major depressive disorders. QTF oral bioavailability is limited due to its poor aqueous solubility and pre-systemic metabolism. The objective of the current investigation was the formulation development and manufacturing of solid self-nanoemulsifying drug delivery system (S-SNEDDS) formulation through a single-step continuous hot-melt extrusion (HME) process to address these drawbacks. In this study, Capmul® MCM, Gelucire® 48/16, and propylene glycol were selected as oil, surfactant, and co-surfactant, respectively, for the preparation of S-SNEDDS. Soluplus® and Klucel™ EF (1:1) were selected as the solid carrier. Response surface methodology in the form of central composite design (CCD) was utilized in the current experimental design to develop the S-SNEDDS formulations via a continuous HME technology. The developed formulations were evaluated for self-emulsifying properties, particle size distribution, thermal behavior, crystallinity, morphology, physicochemical incompatibility, accelerated stability, and in vitro drug release studies. The globule size and emulsification time of the optimized SNEDDS formulation was 92.27 ± 3.4 nm and 3.4 ± 3.38 min. The differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD) studies revealed the amorphous nature of the drug within the formulation. There were no drug-excipient incompatibilities observed following the Fourier transform infrared (FTIR) spectroscopy. The optimized formulation showed an extended-release profile for 24 h. The optimized formulation was stable for three months (last time-point tested) at 40 °C/75% RH. Therefore, the developed S-SNEDDS formulation could be an effective oral delivery platform for QTF and could lead to better therapeutic outcomes.

3D printed capsule shells for personalized dosing of cyclosporine-loaded SNEDDS

Cyclosporine (CsA) is a potent immunosuppressant agent that has been used since 1980 for the treatment of various autoimmune diseases and is extensively used to enhance the survival rate of patients and grafts following organ transplant surgeries. CsA is a poorly soluble drug with a narrow therapeutic window and inter-subject variability, which can lead to graft rejection, nephrotoxicity and other severe adverse effects. This study explores a novel method that combines solubility enhancement of CsA using SNEDDS formulation and personalized dosage delivery using 3D printing technology. The oil phase was chosen as a combination of caproyl 90 and octanoic acid while the Smix phase was chosen as a combination of cremophore El and PEG 400. The optimized liquid SNEDDS was solidified using PEG 6000. An FDM printer was used to print a capsular shell with an oval base that ascends to form a dome with an opening at the top. This opening is used to fill the molten CsA-loaded SNEDDS formulation using a pipette or syringe. The CsA-loaded SNEDDS formulation was characterized by FTIR, DSC and SEM/EDX. The in-vitro release of CsA showed complete release within sixty minutes and followed Korsmeyer-Peppas release kinetics. The drug release was not affected by either the shell opening size or the amount of the loaded formulation. This novel method is simple and straightforward for personalized dosage delivery of drug-loaded SNEDDS formulations.

FORMULATION AND IN VIVO EVALUATION OF PEMIGATINIB SUPER SATURABLE SELF-NANO EMULSIFYING DRUG DELIVERY SYSTEM

Objective: Pemigatinib is an active component in treatment of cholangiocarcinoma, but the low solubility and bioavailability of Pemigatinib limit its wide application. The aim of the present study was to prepare and evaluate supersaturable self-nanoemulsifying drug delivery systems (sSNEDDS) followed by investigating and comparing the pharmacokinetic profiles of Pemigatinib and Pemigatinib sSNEDDS in rat plasma by HPLC. Methods: Pemigatinib loaded SNEDDS were obtained by dissolving drug in the isotropic mixture of oil, surfactant, and co-surfactant. The conventional SNEDDS were converted to sSNEDDS by precipitation method by using an experimented polymer. An appropriate high sensitivity and selectivity was applied to the comparison of plasma pharmacokinetics in Pemigatinib and Pemigatinib sSNEDDS using Entrectinib as an internal standard (IS). Results: The droplet of sSNEDDS ranges from 166.78±3.14 to 178.86±1.24 nm with PDI 0.212–0.256, transmission electron microscopy images revealed the spherical shape of the nanodroplets, emulsification time was 15 secs when added to physiological fluids, percent transmittance of the diluted formulation was 99.12±0.46, and viscosity was 574±26 centipoises indicating the good flow ability. FTIR and DSC studies indicated the amorphization of the drug. The dissolution profile of sSNEDDS indicated the faster release of drug compared to both pure drug suspension and SNEDDS formulation. Cmax of the sSNEDDS 3.52±0.13ng/ml was significant (P&lt;0.05) as compared to the pure drug suspension formulation 2.82±0.42 ng/ml. The AUC0-t, AUC0–∞ of sSNEDDS was increased, while the Tmax and t1/2 was decreased. Moreover, the AUC value in the sSNEDDS group was significantly increased and the relative bioavailability was calculated to be 69% when compared with that of the Pemigatinib group. Conclusion: These results concluded that Pemigatinib sSNEDDS when compared with pure drug after a single oral administration and the formulation modification of Pemigatinib into sSNEDDS can effectively enhance gastrointestinal absorption and relative bioavailability by improving solubility and dissolution rate.

Effectiveness of SNEDDS to Increased Oral Bioavailability in Antihypertension Agents: A Review

Hypertension is a disease that is well known, but the drug solubility of oral Antihypertension drugs has problems with their solubility. The aim of this study was to determine the effect of the SNEDDS formulation on oral Antihypertension drugs. The research method used is a systematic literature review method with PRISMA guidelines using reputable databases namely PubMed, Scopus, and ScienceDirect. From the results of the research studies conducted, the value of the particle size in the SNEDDS preparation of oral Antihypertension drugs is in the range of 13.91–169 nm with a PDI value of ≤ 0.5, which meets the particle size requirements for SNEDDS &lt; 200 nm, and the zeta potential indicating &gt; ± 30 mV, an increase in AUC, Cmax, and Tmax rating in the SNEDDS preparation. This result that the application of SNEDDS to oral Antihypertension drugs is effective in increasing the bioavailability of BCS class II and IV drugs.

Solubility enhancement of fexofenadine using self-nano emulsifying drug delivery system for improved biomimetic attributes

Fexofenadine is a poorly water-soluble drug, which limit its bioavailability and ultimately therapeutic efficacy. Liquid self-nano emulsifying drug delivery system (L-SNEDDs) is an approach that can enhance the solubility of fexofenadine by increasing its surface area and reducing the particle size, which increases the rate and extent of drug dissolution. In this investigation, L-SNEDDs of fexofenadine was made up using surfactants and co-surfactant. The SNEDDS formulation was optimized using a pseudo-ternary phase diagram and characterized. The optimized L-SNEDDS incorporated fexofenadine were thermodynamically stable and showed mean droplet size and zeta potential of 155nm and -18mV, respectively unaffected by the media pH. In addition, the viscosity, and refractive index were observed 18.4 and 1.49cps, respectively for optimized L-SNEDDS fortified fexofenadine. The results of Fourier transform infrared spectroscopy revealed an insignificant interaction between the fexofenadine and excipients. A drug loading efficiency of 94.20% resulted with a complete in vitro drug release in 2h, compared with the pure drug, which demonstrate significant improvement in the efficacy. Moreover, these results signify that on further in vivo assessment L-SNEDDS fortified fexofenadine can indicate improvement in pharmacokinetic and clinical outcome. Thus, the investigation revealed that, the L-SNEDDs incorporated fexofenadine was most effective with a mixture of surfactant and co-surfactant with improved solubility intend to relieve pain associated with inflammation with single-dose oral administration.

Drug permeation enhancement, efficacy, and safety assessment of azelaic acid loaded SNEDDS hydrogel to overcome the treatment barriers of atopic dermatitis

Atopic dermatitis is one of the most widespread chronic inflammatory skin conditions that can occur at any age, though the prevalence is highest in children. The purpose of the current study was to prepare and optimize the azelaic acid (AzA) loaded SNEDDS using Pseudo ternary phase diagram, which was subsequently incorporated into the Carbopol 940 hydrogel for the treatment of atopic dermatitis. The composition was evaluated for size, entrapment efficiency, in vitro, ex vivo, and in vivo studies. The polydispersity index of the optimized preparation was found to be less than 0.5, and the size of the distributed globules was found to be 151.20 ± 3.67 nm. The SNEDDS hydrogel was characterized for pH, viscosity, spreadability, and texture analysis. When compared to the marketed formulation, SNEDDS hydrogel was found to have a higher rate of permeation through the rat skin. In addition, a skin irritation test carried out on experimental animals showed that the SNEDDS formulation did not exhibit any erythematous symptoms after a 24-h exposure. In conclusion, the topical delivery of AzA through the skin using SNEDDS hydrogel could prove to be an effective approach for the treatment of atopic dermatitis.

Development and pharmacokinetic evaluation of Neusilin® US2-based S-SNEDDS tablets for bosentan: Fasted and fed states bioavailability, IVIS® real-time biodistribution, and ex-vivo imaging

The study reported here aimed to develop and optimize the S-SNEDDS tablet of bosentan (BOS) and to investigate its pharmacokinetic and biodistribution properties. The BOS-loaded SNEDDS have been developed and characterized in a previous study. The BOS-loaded SNEDDS formulation was converted to S-SNEDDS using Neusilin® US2. The S-SNEDDS tablets were obtained using the direct compression technique, and in vitro dissolution, in vitro lipolysis, and ex-vivo permeability studies of the tablets were performed. The S-SNEDDS tablet and reference tablet (Tracleer®) were administered to male Wistar rats at 50 mg/kg dose by oral gavage in fasted and fed state conditions. The biodistribution of the S-SNEDDS tablet was investigated in Balb/c mice using fluorescent dye. The tablets were dispersed in distilled water before administration to animals. The relationship between in vitro dissolution data and in vivo plasma concentration was examined. The S-SNEDDS tablets showed 2.47, 7.49, 3.70, and 4.39 increases in the percentages of cumulative dissolution in FaSSIF, FeSSIF, FaSSIF-V2, and FeSSIF-V2, respectively, when compared to the reference, and increased the Cmax and AUC 2.65 and 1.28-fold and 4.73 and 2.37-fold in fasted and fed states, respectively, when compared to the reference. S-SNEDDS tablets also significantly reduced interindividual variability in both fasted and fed states (p < 0.05). The XenoLight™ DiR and VivoTag® 680XL labeled S-SNEDDS tablet formulation increased the real-time biodistribution in the body by factors of 2.4 and 3.4 and organ uptake and total emission increased by factors of 2.8 and 3.1, respectively. The IVIVR has been successfully established for S-SNEDDS tablets (R2 > 0.9). The present study confirms the potential of the S-SNEDDS tablet to enhance the in vitro and in vivo performance of BOS.

Formulasi Self Nano-Emulsifying Drug Delivery System (SNEDDS) Ibuprofen dengan VCO dan Kombinasi Surfaktan

Ibuprofen is one of the Non-Steroidal Anti-Inflammatory Drugs (NSAIDs) class of propionic acid derivatives which has potent anti-inflammatory and antipyretic activity. The solubility of ibuprofen is disadvantageous because it is practically insoluble and has poor dissolution. The aim of this study was to overcome the solubility of ibuprofen through a stable SNEDDS formula. One way to overcome the solubility of ibuprofen is to prepare nanoemulsions using the Self-Emulsifying Drug Delivery System (SNEDDS) technique. SNEDDS is a form of preemulsion drug which spontaneously forms nanoemulsion when it encounters the aqueous phase in the digestive tract. Parameters for the success of the SNEDDS formula include emulsification time, stability, and droplet size using a particle size analyzer (PSA). The SNEDDS formulation was carried out by mixing span 80 and tween 20, PEG 400 and VCO as the oil phase. The characteristics of SNEDDS ibuprofen include homogeneity of SNEDDS, clarity, transmittance, emulsification time, and droplet size. The composition of the optimum formula for SNEDDS ibuprofen is 1 mL of VCO; 1 mL PEG; 7 mL tween 20; 1 mL span 80. The formula shows good homogeneity, is clear with emulsification time of 15 seconds, transmittance is 92.69%, and droplet size is 221.9 nm.

Improvement and characterization of oral absorption behavior of clofazimine by SNEDDS: Quantitative evaluation of extensive lymphatic transport

Clofazimine, an anti-leprosy drug, has been anticipated for a candidate to treat tuberculosis, cryptosporidiosis, and coronavirus infection, but its low oral bioavailability is considered a reason for its limited activity. In the current study, we have tried to improve the oral bioavailability of clofazimine by several SNEDDS formulations and characterized the absorption behavior from various aspects. Among four SNEDDS formulations prepared, SNEDDS A, prepared with castor oil as an oil component, provided the highest bioavailability (around 61%) and SNEDDS D, prepared with Capryol 90, gave the second highest bioavailability. SNEDDS A formed the finest nanoparticles, which were maintained under gastric and intestinal luminal conditions. The comparison in oral bioavailability between the SNEDDS formulation and its corresponding preformed nanoemulsion suggested that SNEDDS A would efficiently form nanoemulsion in the gastrointestinal tract after oral administration. AUC of mesenteric lymph node concentration was the highest for SNEDDS A, which would be one of the reasons for SNEDDS A to reveal the highest oral bioavailability. A cycloheximide-treated oral absorption study and single-pass perfusion study by utilizing a vascular–luminal perfused small intestine–liver preparation clearly indicated that over 90% of clofazimine absorbed to systemic circulation should be derived from lymphatic transport for both SNEDDS A and D. Furthermore, the fraction of dose absorbed was around 65% for SNEDDS D, but SNEDDS A achieved around 94%, indicating the excellent performance of SNEDDS A.

Formulation and evaluation of self-nanoemulsifying drug delivery system for improved oral delivery of exemestane hydrochloride

Exemestane HCl (EXM) is a new irreversible steroidal aromatase inhibitor for adjuvant therapy of hormonally sensitive breast cancer in post-menopausal women. EXM's low water solubility hinders solid oral dosage form development. The current work aims to increase EXM solubility by formulating the self nanoemulsifying drug delivery (SNEDDs) system. The water titration approach was employed in the development of SNEDDs. Based on solubility tests, SNEDDs components Caprol Microexpress and Labrafac were selected as oil phase, Tween 80 as surfactant, and Triacetin as co-surfactant. Phase investigations were carried out with various surfactant:co-surfactant ratios (1:1, 1:2, 1:3, 2:1, 3:1). Tween 80: triacetin (1:2) and (1:3) with Caprol Microexpress and Labrafac alone had the greatest nanoemulsion area. Visual evaluation, optical clarity, particle size, medication concentration, and viscosity were used to optimise 10 formulations. F3, F7, and F8 batches had the lowest size at 7.313 ± 1.44 nm, 6.379 ± 0.45 nm, and 14.67 ± 0.37 nm, respectively, with self-emulsification times under 1 min.But optical clarity data was suggested that F7 was not showing any precipitation up to 24 H. Overall, the developed SNEDDS formulation could be a promising approach for the improved oral delivery of EXE with enhanced dissolution and bioavailability.

Antibacterial and Anti-Acne Activity of Benzoyl Peroxide Nanoparticles Incorporated in Lemongrass Oil Nanoemulgel.

The goal of this study was to make Benzoyl Peroxide (BPO) nanoemulgel to improve its ability to kill bacteria. BPO has trouble getting into the skin, being absorbed by the skin, staying stable, and being spread out. A BPO nanoemulgel formulation was prepared by combining BPO nanoemulsion with Carbopol hydrogel. The drug was tested for solubility in various oils and surfactants in order to select the best oil and surfactant for the drug, and then the drug nanoemulsion formulation was prepared using a self-nano-emulsifying technique with Tween 80, Span 80, and lemongrass oil. The drug nanoemulgel was looked at in terms of its particle size, polydispersity index (PDI), rheological behavior, drug release, and antimicrobial activity. Based on the solubility test results, lemongrass oil was the best solubilizing oil for drugs, while Tween 80 and Span 80 demonstrated the highest solubilizing ability for drugs among the surfactants. The optimum self-nano-emulsifying formulation had particle sizes of less than 200 nm and a PDI of close to zero. The results showed that incorporating the SNEDDS formulation of the drug with Carbopol at various concentrations did not cause a significant change in the particle size and PDI of the drug. The zeta potential results for drug nanoemulgel were negative, with more than 30 mV. All nanoemulgel formulations exhibited pseudo-plastic behavior, with 0.4% Carbopol exhibiting the highest release pattern. The drug nanoemulgel formulation worked better against bacteria and acne than the product on the market. Nanoemulgel is a promising way to deliver BPO because it makes the drug more stable and increases its ability to kill bacteria.

THE FORMULATION OF SELF-NANOEMULSIFYING DRUG DELIVERY SYSTEM OF ETHANOL EXTRACT OF Marsilea crenata C. Presl. LEAVES

Marsilea crenata C. Presl. contains phytoestrogens, which have structures or activity similar to estrogen and could potentially be utilized as a neuroprotector in an estrogen deficiency disease. This study aims to utilize M. crenata in the formulation of SNEDDS as a neuroprotector. The dosage form chosen aims to maintain stability and effectiveness because of its multi-compound properties. M. crenata was extracted using ethanol, then formulated into four SNEDDS formulas, and then characterization was done, which included physical quality (organoleptic and pH), particle size, polydispersity index, transmittance percentage, and Scanning Electron Microscope (SEM) analysis. The results showed that the four formulas produced a homogenous yellow color with a distinctive odor formulation; the values of the pH, particle size, polydispersity index, and transmittance percentage were still in the allowable range; and the SEM analysis showed that SNEDDS particles dominated with a spherical shape of particles. It can be concluded that the ethanol extract of M. crenata leaves can be formulated into SNEDDS and the best SNEDDS formulation was formula B at 100 ppm extract concentration which had the smallest particle size, smallest polydispersity index, and the largest transmission percentage.