Skin Permeation Rate Research Articles

Percutaneous Absorption of Two Bisphenol A Analogues, BPAF and TGSA: Novel In Vitro Data from Human Skin

Bisphenol AF (BPAF) and TGSA are analogues of Bisphenol A (BPA). BPAF is used in polymer synthesis, while TGSA is applied in thermal papers. The EU classifies BPAF as toxic to reproduction and TGSA as a skin sensitizer. However, TGSA's other health effects remain unclear. BPAF contamination has been noted among electronic waste workers, and TGSA exposure is documented in various professions. Despite the significance of skin contact, data on skin permeation rates for BPAF and TGSA are limited. This study aimed to generate percutaneous absorption data for BPAF and TGSA following OECD guidelines.[14C]-labelled BPAF or TGSA was applied to human skin samples in vitro using Franz diffusion cells for 20 and 40 h, respectively. Key parameters such as steady-state flux, lag time, and skin permeability coefficient (Kp) were calculated. Furthermore, the distribution of the dose across different compartments, particularly within the skin, was evaluated at the conclusion of the experiment. Sequential strippings and epidermis-dermis separation were conducted for BPAF to predict the potential absorption of the remaining dose present within the skin.The permeability coefficients for BPAF and TGSA were found to be 1.9 E-03 and 1.6 E-03 cm/h, with 22% and 23% of the applied doses absorbed, respectively. Both chemicals are classified as "fast" penetrants based on their Kp values. These findings suggest that BPAF and TGSA are absorbed through the skin, highlighting potential occupational risks through dermal exposure. The new percutaneous absorption data will enhance the assessment of the occupational risks.

Green formulation of Menadione-loaded niosome as a skin-lightening preparation: In vitro/In vivo safety evaluation on Wistar rat

Purpose: In the present research, a green technique (an ultrasonic method) was used to synthesize menadione sodium bisulfite (MSB) niosome (Menasome) which is used to improve dermal delivery and increase anti-melanogenesis activities. Methods: Various cholesterol: surfactant (Chol: Sur) ratios were investigated to optimize the Menasomes. Photon correlation spectroscopy, attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), transmission electron microscopy (TEM), and differential scanning calorimetry (DSC) were employed to characterize the solid state of MSB in nanoparticle form. Additionally, the optimized formulation was used to investigate ex-vivo skin absorption, in vivo skin irritation, in vitro cell survival, and anti-melanogenesis activity. Results: The results exhibited that increasing cholesterol (Chol) declined the average size of the Menasomes from 653.766±25.171 nm to 298.133±8.823 nm and increased entrapment efficiency 30.237±3.4204% to 83.616±2.550 %. The rat skin permeation study indicated that Menasome gel administered more MSB in dermal layers (439.000±36.190μg/cm2 or 23.827±1.964%) than MSB plain gel (286.200± 22.6μg/cm2 or 15.53±1.227%). In both the in vivo skin irritation test and the in vitro cytotoxicity experiment, the extended-release behavior of the enhanced Menasome demonstrated a minimal side effect profile. Furthermore, optimum Menasome inhibited melanin formation (37.426± 1.644% at 15μM) greater than free MSB (57.383±1.654%) considerably (p <0.05). Furthermore, Menasome 7 prevented L-dopa auto-oxidation in higher levels (95.140±2.439%) than pure MSB solution (83.953±1.629%). Conclusion: According to the study's findings, the prepared Menasome could be employed as a viable nanovehicle for MSB dermal delivery, a promising solution for the management of human hyperpigmentation disorders.

Carrier-free cryptotanshinone-peptide conjugates self-assembled nanoparticles: An efficient and low-risk strategy for acne vulgaris

Acne vulgaris ranks as the second most prevalent dermatological condition worldwide, and there are still insufficient safe and reliable drugs to treat it. Cryptotanshinone (CTS), a bioactive compound derived from traditional Chinese medicine Salvia miltiorrhiza, has shown promise for treating acne vulgaris due to its broad-spectrum antimicrobial and significant anti-inflammatory properties. Nevertheless, its local application is hindered by its low solubility and poor skin permeability. To overcome these challenges, a carrier-free pure drug self-assembled nanosystem is employed, which can specifically modify drug molecules based on the disease type and microenvironment, offering a potential for more effective treatment. We designed and synthesized three distinct structures of cationic CTS-peptide conjugates, creating self-assembled nanoparticles. This study has explored their self-assembly behavior, skin permeation, cellular uptake, and both in vitro and in vivo anti-acne effects. Molecular dynamics simulations revealed these nanoparticles form through intermolecular hydrogen bonding and π-π stacking interactions. Notably, self-assembled nanoparticles demonstrated enhanced bioavailability with higher skin permeation and cellular uptake rates. Furthermore, the nanoparticles exhibited superior anti-acne effects compared to the parent drug, attributed to heightened antimicrobial activity and significant downregulation of the MAPK/NF-κB pathway, leading to reduced expression of pro-inflammatory factors including TNF-α, IL-1β and IL-8. In summary, the carrier-free self-assembled nanoparticles based on CTS-peptide conjugate effectively address the issue of poor skin bioavailability, offering a promising new approach for acne treatment.

Preparation, Characterization, and Skin Permeation Evaluation of Naproxen Microemulsions for Transdermal Delivery

: Microemulsions (MEs) are considered for preparing drug delivery carriers, especially transdermal vehicles. Nonsteroidal anti-inflammatory drugs (NSAIDs) are commonly used to manage chronic and acute pain and inflammatory diseases. However, NSAIDs have drawbacks such as gastrointestinal tract disorders and poor pharmacokinetic properties for oral administration. To address these issues, we evaluated the potential of ME as a transdermal system for locally delivering naproxen (NPX) as an NSAIDs model (NPX-MEs). Phase diagrams were constructed for MEs composed of tween 80, span 80, and propylene glycol (PG) as surfactant (S)/cosurfactant (CS), transcutol® P (TRC-P), and LabrafacTM PG as oil. The final concentration of NPX in MEs was 1% (w/v). The MEs were analyzed for particle size, refractive index, and viscosity. In vitro permeability studies of NPX-MEs were conducted using Franz diffusion cells on rat skin samples. Additionally, the effects of Eucalyptus oil (EU oil), oleic acid (OLA), and TRC-P as enhancers on the skin permeation of NPX were investigated. The particle size and viscosity values of the NPX-MEs ranged from 7.05 ± 0.03 to 79.56 ± 0.58 nm and 222.4 ± 0.87 to 681.13 ± 1.97, respectively. The optimal formulation, ME-3, consisted of 20% oil, 10% water, and 70% S/C phases. The skin permeation rates of NPX from ME-3 were higher than those of other formulations (Dapp = 1.36 ± 0.616, ERD=527.989 ± 313.627) with a lower lag time. Additionally, OLA-treated skin showed the highest transdermal permeation rate (ERD = 75.55 ± 23.532). Based on these results, the formulated NPX-ME may be a desirable carrier for transdermal delivery compared to traditional formulations, potentially reducing side effects and improving the therapeutic efficacy of NPX.

Deformable Vesicles with Edge Activators for the Transdermal Delivery of Non-Psychoactive Cannabinoids.

Transdermal delivery of highly lipophilic molecules is challenging due to the strong barrier function of the skin. Vesicles with penetration enhancers are safe and efficient systems that could improve the transdermal delivery of non-psychoactive cannabinoids such as cannabidiol and desoxy-cannabidiol. In the last decades, research interest in desoxy-cannabidiol as a potent drug with anti-nociceptive properties has risen. Still, its scarce market availability poses a limit for both research and clinical applications. Therefore, it is necessary to improve the synthesis to produce sufficient amounts of desoxy-cannabidiol. Moreover, also the formulation aspects for this drug are challenging and require to be addressed to meet an efficient delivery to the patients. This work aimed to develop innovative phospholipid-based vesicles with propylene glycol (PG), oleic acid (OA), or limonene as edge activators, for the transdermal delivery of highly lipophilic drugs such as non-psychoactive cannabinoids. In particular, desoxy-cannabidiol was selected thanks to its anti-nociceptive activity, and its synthesis was improved enhancing the stereoselectivity of its synthon's production. Desoxy-cannabidiol was synthesized by Lewis acid-mediated condensation of p-mentha-2,8-dien- 1-ol and m-pentylphenol, improving the stereoselectivity of the first synthon's production. Transethosomes containing 20-50% w/w PG, 0.4-0.8% w/w OA, or 0.1-1% w/w limonene were optimized and loaded with cannabidiol or desoxy-cannabidiol (0.07-0.8% w/w, 0.6-7.0 mg/mL). Ex-vivo studies were performed to assess both the skin permeation and accumulation of the cannabinoids, as well as the penetration depth of fluorescein- loaded systems used as models. An enantioselective bromination was added to the pathway, thus raising the production yield of pmentha- 2,8-dien-1-ol to 81% against 35%, and the overall yield of desoxy-cannabidiol synthesis from 12% to 48%. Optimized transethosomes containing 0.6 mg/mL cannabinoids were prepared with 1:10 PG:lipid weight ratio, 0.54 OA:lipid molar ratio, and 0.3 limonene:lipid molar ratio, showing good nanometric size (208 ± 20.8 nm - 321 ± 26.3 nm) and entrapment efficiency (> 80%). Ex-vivo tests showed both improved skin permeation rates of cannabinoids (up to 21.32 ± 4.27 μg/cm2 cannabidiol), and skin penetration (depth of fluorescein up to 240 μm, with PG). Desoxy-cannabidiol was successfully produced at high yields, and formulated into transethosomes optimized for transdermal delivery. Loaded vesicles showed improved skin penetration of desoxy-cannabidiol, cannabidiol and a lipophilic probe. These results suggest the potential of these carriers for the transdermal delivery of highly lipophilic drugs.

Structural elucidation and development of azelaic acid loaded mesoporous silica nanoparticles infused gel: Revolutionizing nanodrug delivery for cosmetics and pharmaceuticals

This research aimed to enhance dermal delivery and optimize depigmentation therapy by designing mesoporous silica nanoparticles (MSNs) encapsulating azelaic acid (AZA) within a gel matrix. The MSNs were prepared using the sol-gel method. After subsequent processes, including acid extraction and drug loading, were then elucidated through PDI, size, zeta-potential, entrapment efficiency, nitrogen adsorption assay, FE-SEM, thermogravimetric analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, X-ray diffraction, and tyrosinase inhibition assay, were employed to assess the formulation. In-vitro stability tests for both AZA-MSN gel (AZCG) and AZA-loaded mesoporous silica gel (AZMG) were conducted at 8 °C, 25 °C, 40 °C, and 40 °C + 75 % RH, encompassing assessments of color, liquefaction, pH, and conductivity. Our findings showed a notable entrapment efficiency of 93.46 % for AZA-MSNs, with FE-SEM illustrating porous spherical MSNs. The particle size of AZA-MSNs was determined to be 211.9 nm, with a pore size of 2.47 nm and XRD analysis confirmed the amorphous state of AZA within the MSN carriers. Rheology examination indicated a non-Newtonian flow, while ex-vivo rat skin permeation studies conducted in a phosphate buffer (pH = 5.5) demonstrated a biphasic release pattern with 85.53 % cumulative drug permeation for AZA-MSNs. Overall, the study endorse the potential of AZA-MSNs as an efficacious and stable formulation for AZA delivery, highlighting their promise in addressing pigmentation concerns compared to conventional approaches.

Determination of potential dermal exposure rates of phosphorus flame retardants via the direct contact with a car seat using artificial skin

Dermal exposure to phosphorus flame retardants (PFRs) has received much attention as a major alternative exposure route in recent years. However, the information regarding dermal exposure via direct contact with a product is limited. In addition, in the commonly used dermal permeability test, the target substance is dissolved in a solvent, which is unrealistic. In this study, a dermal permeability test of PFRs in three car seats was performed using artificial skin. The PFR concentrations in the car seats are 0.12 wt% tris(2-chloroethyl) phosphate (TCEP), 0.030–0.25 wt% tris(2-chloroisopropyl) phosphate (TCPP), 0.15 wt% triphenyl phosphate (TPhP), 0.89 wt% cresyl diphenyl phosphate (CsDPhP), 0.074 wt% tricresyl phosphate (TCsP), and 0.46–4.7 wt% diethylene glycol bis [di (2-chloroisopropyl) phosphate (DEG-BDCIPP). The mean skin permeation rates for a contact time of 24 h are 14 (TCEP), 5.4–160 (TCPP), 0.67 (CsDPhP), 0.38 (TPhP), and 3.3–58 ng cm−2 h−1 (DEG-BDCIPP). The concentrations of TCsP in receptor liquid were lower than the limit of quantification at the contact time of 24 h. The skin permeation rates were significantly affected by the type of car seat (e.g., fabric or non-fabric). The potential dermal TCPP exposure rate for an adult via direct contact with the car seat during the average daily contact time (1.3 h), which was the highest value assessed in this study, was estimated to be 16,000 ng kg−1 day−1, which is higher than that related to inhalation and dust ingestion reported as significant exposure route of PFRs in previous studies. These facts reveal that dermal exposure associated with direct contact with the product might be an important exposure pathway for PFRs.

Predicting skin permeation-enhancing effect of fixed oils using saturated to unsaturated fatty acid ratio content

Background: Transdermal drug delivery is non-invasive and advantageous as it improves patient compliance.
 Objective: This study evaluated the effect of varying ratios of saturated to unsaturated fatty acids in fixed oils on the permeation of ibuprofen across pig dorsal skin.
 Methods: The solubility of ibuprofen in soybean oil, theobroma oil, and shea butter (fixed oils) was evaluated and in vitro skin permeation studies were conducted using Franz diffusion cells.
 Results: A significant difference in permeability parameters, such as flux and effective skin permeability, in the different formulations was observed. Skin permeation depended on the ratio of saturated to unsaturated fatty acids. It also depended on the type and concentration of individual saturated and unsaturated fatty acids present in the fixed oils. The skin permeation of ibuprofen increased with an increasing ratio of palmitic acid (PA) to oleic acid (OA) concentrations. The highest flux was obtained in the theobroma oil formulation, with a PA:OA ratio of 0.78. The lowest flux was obtained in the shea butter formulation, with a PA:OA ratio of 0.09. The PA:OA ratio was 0.46 in the soybean oil formulation.
 Conclusion: These results suggest that the ratio of saturated to unsaturated fatty acids in fixed oils could be used as a model for predicting the rate of skin permeation of drugs in oil-based formulations. Depending on the desired rate of drug permeation, different combinations of the ratio of saturated to unsaturated fatty acids can be used in formulations for transdermal delivery.

Design of oleic acid/alkyl glycoside composite vesicles as cosmetics carrier: stability, skin permeability and antioxidant activity

Biocompatible fatty acids are natural biological materials which exhibit widespread biomedical applications. Nevertheless, their application in vesicle forms is hampered by strong pH sensitivity and poor stability to changes in ionic strength, temperature, and storage. In the investigation, the incorporation of alkyl glycoside (APG), a surfactant with non-ionic properties, into the oleic acid (OA) vesicles was undertaken as a means to address this issue. The newly formed OA/APG composite vesicles form in a pH range of between 5.4 and 7.4, which is close to the pH range of the physiological environment. The stability studies results showed that the OA/APG composite vesicles have excellent stability in terms of ionic strengths, temperature and storage. The formation of NAR-loaded OA/APG composite vesicles was demonstrated through FT-IR, DSC and XRD. In vitro topical delivery and skin retention studies confirmed that the composite vesicles improve skin permeation rate and have better skin permeation behavior. Antioxidant activity experiments confirmed that the antioxidant effect composite vesicles were significantly increased as compared to the naringenin (NAR). This finding has theoretical implications for the use of drug-loaded fatty acid vesicles in cosmetics industries and topical delivery systems.

Lipo-polymeric nano-complexes for dermal delivery of a model protein.

Delivering macromolecules across the skin poses challenges due to the barrier properties of stratum corneum. Different strategies have been reported to cross this barrier, such as chemical penetration enhancers and physical methods like microneedles, sonophoresis, electroporation, laser ablation, etc. Herein, we explored a cationic lipo-polymeric nanocarrier to deliver a model protein across the skin. A cationic amphiphilic lipo-polymer was used to prepare blank nanoplexes, which were subsequently complexed with anionic fluorescein-tagged bovine serum albumin (FITC-BSA). Blank nanoplexes and FITC-BSA complexed nanoplexes showed sizes of 93.72 ± 5.8 (PDI-0.250) and 145.9 ± 3.2 nm (PDI-0.258), respectively, and zeta potentials of 25.6 ± 7.0 mV and 9.17 ± 1.20 mV. In vitro cell culture, and toxicity studies showed optimal use of these nanocarriers, with hemocompatibility data indicating non-toxicity. Ex vivo skin permeation analysis showed a skin permeation rate of 33% after 24 h. The optimized formulation was loaded in a carbopol-based gel that exhibits non-Newtonian flow characteristics with shear-thinning behavior and variable thixotropy. The nanoplexes delivered via gel demonstrated skin permeation of 57% after 24 h in mice skin ex vivo. In vivo skin toxicity testing confirmed the low toxicity profile of these nanocarriers. These results are promising for the transdermal/dermal delivery of macromolecules, such as protein therapeutics, using nanoplexes.

Co-delivery of lapatinib and 5-fluorouracil transfersomes using transpapillary iontophoresis for breast cancer therapy

Combination chemotherapy, involving the intervention of two or more anti-neoplastic agents has been the cornerstone in breast cancer treatment, owing to the applications it holds in contrast to the mono-therapy approach. This research predominantly focussed on proving the synergy between Lapatinib (LPT) and 5-Fluorouracil (5-FU) and further enhancing its localized permeation via transfersome-loaded delivery and iontophoresis to treat breast tumors. The IC50 values for LPT and 5-FU were found to be 19.38 µg/ml and 5.7 µg/ml respectively and their synergistic effect was proven by the Chou-Talalay assay using CompuSyn software. Furthermore, LPT and 5-FU were encapsulated within transfersomes and administered via the transpapillary route. The drug-loaded carriers were characterized for their particle size, polydispersity index, zeta potential, and entrapment efficiency. The ex vivo rat skin permeation studies indicated that when compared to LPT dispersion and 5-FU solution, drug-loaded transfersomes exhibited better permeability and their transpapillary permeation was enhanced on using iontophoresis. Moreover, both LPT and 5-FU transfersomes were found to be stable for 3 months when stored at a temperature of 5 ± 3 °C. The results indicated that this treatment strategy could be an effective approach in contrast to some of the conventional treatments employed to date.

Design and Development of Functionalized Single-walled Carbon Nanotube-ethosomes for Transdermal Delivery of Ketoprofen.

The purpose of this study was to combine carbon nanotube with ethosomes in order to obtain hybrid nanocarriers for transdermal delivery of ketoprofen (KP). KP-loaded functionalized single-walled carbon nanotube (f-SWCNTs) composite ethosomes (f-SWCNTs-KP-ES) were designed and were verified by a series of characterizations. The particle size of the preparation is less than 400 nm. DSC and XRD experiments showed that KP existed in an amorphous state after it was adsorbed and loaded on f-SWCNTs. TEM experiments showed that the structure of SWCNTs remained intact after oxidation and modification by PEI. FTIR results showed that PEI were successfully modified on the surface of SWCNT-COOH, and KP was successfully loaded on f-SWCNTs. In vitro release characteristics showed that the preparation had sustained release behavior and conformed to the first-order kinetic equation model. In addition, f-SWCNTs-KP-ES gel were prepared and in vitro skin permeation and in vivo pharmacokinetics were studied. The results showed that f-SWCNTs-KP-ES gel could enhance the skin permeation rate of KP and increase the drug retention of drugs in the skin. The characterization results consistently showed f-SWCNTs is a promising drug carrier. The hybrid nanocarrier prepared by the combination of f-SWCNTs and ethosomes can enhance the transdermal absorption of drugs and improve the bioavailability of drugs, which has a certain significance for the development of advanced hybrid nano-preparations.

Perspective Impact of Gelling Agents on the Mechanistic Behavior for the Topical Delivery of Flufenamic Acid Nano-Ethosomal Dispersion

Objective: This work involves the preparation and in vitro characterization of a topical gel formulation that is capable of deep skin permeation, providing the anti-inflammatory effect for the optimum nano ethosomal dispersion formula. Methods: The optimum ethosomal dispersion was prepared (in our laboratory) by utilizing 3% flufenamic acid (FA), 30% ethanol, 1% phosphatidylcholine (PC), 10% propylene glycol, and 1% cholesterol by cold method and 20 minutes’ ultra-sonication. Four ethosomal gel formulas (G1-G4) were prepared by using carbopol 934 and carbopol 940 at 1% and 1.5% concentration at a 1:1 ratio as a gelling agent. These formulas were further subjected to in vitro characterization to assess their physical appearance, consistency, viscosity, spreadability, in vitro drug release, and ex-vivo skin permeation and deposition. Results: The results revealed that the formula (G1) demonstrated the best homogeneity, consistency, and spreadability as well as an initial release of 68.53% after 10 hours, that continued up to 89.36% after 24 hours, and a significantly higher drug release percentage at pH 7.4 than pH 5.5 with substantially higher ex vivo abdominal rat skin permeation (60.74%) and deposition percentages (36.87%%) in comparison to flufenamic acid plain gel prepared conventionally which demonstrated 23.73% and 14.96% skin permeation and deposition percentages after 24 hours. Conclusion: This work was successful in preparing a novel topical gel using ethosomal nanocarriers, promoting efficient topical skin delivery of the anti-inflammatory FA with a once-daily application, which improved patient compliance.

Quantitative Retention (Structure)-Activity Relationships in Predicting the Pharmaceutical and Toxic Properties of Potential Pesticides.

The micellar liquid chromatography technique and quantitative retention (structure)–activity relationships method were used to predict properties of carbamic and phenoxyacetic acids derivatives, newly synthesized in our laboratory and considered as potential pesticides. Important properties of the test substances characterizing their potential significance as pesticides as well as threats to humans were considered: the volume of distribution, the unbonded fractions, the blood–brain distribution, the rate of skin and cell permeation, the dermal absorption, the binding to human serum albumin, partitioning between water and plants’ cuticles, and the lethal dose. Pharmacokinetic and toxicity parameters were predicted as functions of the solutes’ lipophilicities and the number of hydrogen bond donors, the number of hydrogen bond acceptors, and the number of rotatable bonds. The equations that were derived were evaluated statistically and cross-validated. Important features of the molecular structure influencing the properties of the tested substances were indicated. The QSAR models that were developed had high predictive ability and high reliability in modeling the properties of the molecules that were tested. The investigations highlighted the applicability of combined chromatographic technique and QS(R)ARs in modeling the important properties of potential pesticides and reducing unethical animal testing.

Synthesis and In Vitro/Ex Vivo Characterizations of Ceftriaxone-Loaded Sodium Alginate/poly(vinyl alcohol) Clay Reinforced Nanocomposites: Possible Applications in Wound Healing

(1) Background: Nanocomposite films are widely applied in the pharmaceutical industry (e.g., nanodrug delivery systems—NDDS). Indeed, these nanomaterials can be produced at a large industrial scale and display valuable properties (e.g., antibacterial, renewability, biodegradability, bioavailability, safety, tissue-specific targeting, and biocompatibility), which can enhance the activity of conventional marketed drugs. (2) Aim: To fabricate and investigate the in vitro properties of the antibiotic ceftriaxone sodium (CTX) once encapsulated into sodium alginate (SA)/poly(vinyl alcohol)PVA-clay reinforced nanocomposite films. (3) Methods: Different ratios of the polymers (i.e., SA, PVA) and CTX drug were used for the synthesis of nanocomposite films by solvent casting technique. Montmorillonite (MMT), modified organically, was added as a nanofiller to increase their thermal and mechanical strength. The prepared samples were physically characterized by thermogravimetric analysis (TGA), X-ray diffraction (XRD), scanning electronic microscopy (SEM), and energy-dispersive X-ray analysis (EDX). The physicochemical behavior (i.e., swelling, erosion, dissolution/drug release behavior and rat skin permeation) was also assessed. Comparisons were made with the currently marketed free CTX dosage form. (4) Results: TGA of the nanoformulation showed increased thermostability. XRD revealed its semi-crystalline nature. SEM depicted a homogeneous drug-loaded SA/PVA nanocomposite with an average size ranging between 300 and 500 nm. EDX confirmed the elemental composition and uniform distribution of mixing components. The water entrapment efficiency study showed that the highest swelling and erosion ratio is encountered with the nanoformulations S100(3) and S100D15(3). Ex vivo permeation revealed a bi-step discharge mode with an early burst liberation chased by continued drug discharge of devised nanoparticles (NPs). The dissolution studies of the drug-loaded polymer nanocomposites elicited sustained pH-dependent drug release. The cumulative drug release was the highest (90.93%) with S100D15(3). (5) Conclusion: S100D15(3) was the finest formulation. To the best of our knowledge, we also pioneered the use of solvent casting for the preparation of such nanoformulations. Polymers and reinforcing agent, concentrations and pH were rate-deterring features for the preparation of the optimized formulation. Thus, CTX-loaded SA/PVA-MMT reinforced nanocomposite appeared as a promising nanodrug delivery system (NDDS) based on its in vitro physicochemical properties.

Enhancement of Drug Penetration Rate by Enriching Skin Hydration: A Novel Amalgamation of Microemulsion and Supersaturation

Background: The evolving need and facilitation of topical formulations have risen in the present era. Topical industries are continually striving to satisfy patients with newer and innovative products. However, dry skin is the critical factor contributing to drug penetration into the skin. Objective: The current research aims to develop cost-effective and commercially feasible industrial scale microemulsion of wheat germ oil to enrich skin hydration, enhancing the drug permeation rate. Methods: The Pseudo-ternary phase diagram was constructed for screening of microemulsion components. Wheat germ oil containing O/W microemulsion was prepared and evaluated for physicochemical parameters, thermodynamic stability study, globule size determination, enhancement of skin hydration, and skin permeation rate by ex vivo study. Results: The wheat germ oil containing microemulsion was prepared by incorporating tween 20 [surfactant] and ethanol [co-surfactant]. All physicochemical parameters were in the ideal range. Following the thermodynamic stability study, the TEM study showed globule size of optimized microemulsions in the range of 69.64 nm to 84.42 nm. The skin moisture tester showed a high hydration level for more than eight hours. An Ex vivo study revealed higher drug flux [Jss] of Pomegranate peel Extract [17.99 μg/cm2/h] with an enhancement ratio of 1.69. Conclusion: The topical formulation application has become challenging for researchers due to the skin's dryness and lower water content. However, the developed WGO microemulsion aids more penetration and is helpful in achieving higher drug flux. In addition, it is a cost-effective, easy to prepare, and patient-friendly drug delivery system.

Preparation and Characterization of Lidocaine-Loaded, Microemulsion-Based Topical Gels.

Microemulsion-based gels (MBGs) were prepared for transdermal delivery of lidocaine and evaluated for their potential for local anesthesia. Lidocaine solubility was measured in various oils, and phase diagrams were constructed to map the concentration range of oil, surfactant, cosurfactant, and water for oil-in-water (o/w) microemulsion (ME) domains, employing the water titration method at different surfactant/cosurfactant weight ratios. Refractive index, electrical conductivity, droplet size, zeta potential, pH, viscosity, and stability of fluid o/w MEs were evaluated. Carbomer® 940 was incorporated into the fluid drug-loaded MEs as a gelling agent. Microemulsion-based gels were characterized for spreadability, pH, viscosity, and in-vitro drug release measurements, and based on the results obtained, the best MBGs were selected and subsequently subjected to ex-vivo rat skin permeation anesthetic effect and irritation studies. Data indicated the formation of nano-sized droplets of MEs ranging from 20 - 52 nm with a polydispersity of less than 0.5. In-vitro release and ex-vivo permeation studies on MBGs showed significantly higher drug release and permeation in comparison to the marketed topical gel. Developed MBG formulations demonstrated greater potential for transdermal delivery of lidocaine and advantage over the commercially available gel product, and therefore, they may be considered as potential vehicles for the topical delivery of lidocaine.

Enhanced permeability and photoprotective potential of optimized p-coumaric acid-phospholipid complex loaded gel against UVA mediated oxidative stress.

Photo-oxidative skin damage is mainly caused by the UV-A radiation of the sun. Synthetic sunscreens used to counter this acts mostly on the superficial skin layer and possess serious side effects. P-coumaric acid (PCA) is a UV-A protective plant phenolic having quick diffusion and distribution in superficial skin layers limiting its application as herbal sunscreen. The present study was designed to formulate an optimized phospholipid complex of PCA (PCAPC) through response surface methodology to enhance its skin permeation to deeper skin layers providing protection against photo-oxidative stress. PCAPC was characterized by FT-IR, DTA, PXRD, TEM, zeta potential etc. PCAPC was then incorporated into a gel formulation (PCAPC-GE) to facilitate its transdermal delivery. Physicochemical properties of the gel were assessed by pH, homogeneity, rheology, spreadability etc. In-vitro SPF and UVA-PF of the gel was evaluated and compared with conventional gel (PCA-GE). Ex-vivo skin permeation flux, permeability coefficient, skin deposition and dermatokinetic analysis were carried out to measure the rate and level of skin permeation. This was accompanied by in-vivo evaluation of PCAPC-GE and PCA-GE in the experimental rat model by measuring the various oxidative stress markers such as superoxide dismutase, catalase etc. PCAPC-GE provided high SPF and UVA-PF value compared to PCA-GE. The physicochemical parameters were suitable for transdermal application. PCAPC-GE enhanced the permeation rate of PCA by almost 6 fold compared to PCA-GE. Besides, a significant reduction of UV-A induced oxidative stress biomarkers were observed for PCAPC-GE. Thus, the PCAPC-GE may be an effective alternative of synthetic sunscreens due to its enhanced permeation and protection against UVA-induced oxidative stress.

A quantitative UHPLC-MS/MS method for the growth hormone-releasing peptide-6 determination in complex biological matrices and transdermal formulations

Growth hormone-releasing peptide-6 (GHRP-6) is part of a group of small synthetic peptides with potent GH-releasing activity that have gained attention in the last two decades by virtue of their cyto- and cardioprotective effects. Despite numerous preclinical studies highlighting the potential cardiovascular benefits of GHRP-6, confirmation of clinical efficacy is still awaited. Recent advances in transdermal drug delivery systems have been made to address challenges related to the poor skin permeation rate of peptides by using pain-free microneedle (MN) devices. Accordingly, highly sensitive and validated analytical methods are required for the potential clinical translation of MN-based peptides. The ultra-performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) methods developed in this study aimed to quantify GHRP-6 in biological matrices (plasma, skin) and dissolving polymeric MNs. UHPLC/MS-MS method detection limits of 0.1, 1.1, 0.9 and 1.5 ng/mL were achieved in neat solution, plasma, MN polymer solution, and skin matrices, respectively. Method validation also involved assessment of precision, accuracy, limits of quantification, linearity of matched calibration curves (R2 > 0.990), extraction recovery, matrix effect, stability studies, selectivity, and carry-over effect. Additionally, quality control samples were analyzed at three concentration levels to determine recovery (85–109%) and accuracy/bias (3.2–14.7%). Intra- and inter-day precision were within the range of acceptance (RSDs of 3.0–13.9% and 0.4–14.5%, respectively). The validity and applicability of such methods were successfully demonstrated for transdermal GHRP-6 delivery using GHRP-6-loaded MN patches applied to pig skin.

Human skin permeation rates ex vivo following exposures to mixtures of glycol ethers

Skin exposure to cleaning products in the general and occupational population are a public health concern. Among the most frequently identified amphiphilic organic solvents in cleaning products are propylene glycol monomethyl ether (PGME) and propylene glycol n-butyl ether (PGBE). Internal dose from skin exposure may be efficiently evaluated using in vitro flow-through diffusion cells with excised human skin. Our aim in this study was two-fold; 1) characterize the permeation rates (J), time lag (Tlag), and permeation coefficients (Kp) of PGME and PGBE in human ex-vivo skin permeation assays, and 2) determine a possible mixture effect on skin permeation characteristics when applied together. Our results showed a short Tlag for PGME and was reduced further depending on the amount of PGBE in the mixture (Tlag was reduced from 2 h to 1–1.7 h) for fresh skin. PGBE Tlag slightly increased when mixed with 50 % or more PGME. Permeation rate decreased to half for both PGME and PGBE in mixture at any concentration. This substantial permeation was greater with previously frozen skin. This mixture effect could favor permeation of other compounds through human skin.