Single Crystal Surfaces Research Articles

Automated Growth Rate Measurement of the Facet Surfaces of Single Crystals of the β-Form of l-Glutamic Acid Using Machine Learning Image Processing.

Precision measurement of the growth rate of individual single crystal facets (hkl) represents an important component in the design of industrial crystallization processes. Current approaches for crystal growth measurement using optical microscopy are labor intensive and prone to error. An automated process using state-of-the-art computer vision and machine learning to segment and measure the crystal images is presented. The accuracies and efficiencies of the new crystal sizing approach are evaluated against existing manual and semi-automatic methods, demonstrating equivalent accuracy but over a much shorter time, thereby enabling a more complete kinematic analysis of the overall crystallization process. This is applied to measure in situ the crystal growth rates and through this determining the associated kinetic mechanisms for the crystallization of β-form l-glutamic acid from the solution phase. Growth on the {101} capping faces is consistent with a Birth and Spread mechanism, in agreement with the literature, while the growth rate of the {021} prismatic faces, previously not available in the literature, is consistent with a Burton-Cabrera-Frank screw dislocation mechanism. At a typical supersaturation of σ = 0.78, the growth rate of the {101} capping faces (3.2 × 10-8 m s-1) is found to be 17 times that of the {021} prismatic faces (1.9 × 10-9 m s-1). Both capping and prismatic faces are found to have dead zones in their growth kinetic profiles, with the capping faces (σc = 0.23) being about half that of the prismatic faces (σc = 0.46). The importance of this overall approach as an integral component of the digital design of industrial crystallization processes is highlighted.

Electrochemistry of Molybdenum Single Crystals and Thin Wires in Cyanide and Gold Cyanide Electrolytes

Thin wires of molybdenum coated with gold are used for space applications and the adhesion of the gold layer is decisive for their use. The surface morphology of the wires is determined by the manufacturing process and preferential orientation of single crystal surfaces is expected. In this work three different single crystal surfaces were studied together with a 20 μm molybdenum wire to elucidate the importance of surface morphology on the electrodeposition process for gold. Electrochemical impedance spectroscopy was used to study the molybdenum samples in the absence and presence of gold cyanide complexes. The results show large pseudocapacitance prior to gold deposition, indicating the presence of a thin molybdenum oxide film on the surface. Thus, the electrodeposition takes place on the surface oxide and is afflicted with a nucleation overpotential. The overpotential is only slightly dependent on the single crystal orientation, while it is more negative for the wire. The adhesion of gold on the flat single crystal surfaces is weak but marginally better on the wire. This clearly shows that strong chemical binding to the surface is absent and that other processes, such as physical interlocking of the gold layer is necessary for good adhesion.

Research on the Stability of Different Polar Surfaces in Aluminum Nitride Single Crystals

Wurtzite aluminum nitride (AlN) crystal has a non-centrosymmetric crystal structure with only a single axis of symmetry. In an AlN crystal, the electronegativity difference between the Al atom and N atom leads to a distortion of electron cloud distribution outside the nucleus and a spontaneous polarization (SP) along the c-axis direction. The N-polar surface along the directions of [000-1] has higher surface energy than the Al-polar surface along the directions of [0001]. Due to the different atomic arrangement, Al atoms on the Al-polar surface bond with O and OH− in the environment to generate Al2O3·xH2O, which prevents the reaction from occurring inside the crystal. After the Al2O3·xH2O dissolve in an alkaline environment, N atoms have three dangling bonds exposed on the surface, which can also protect OH− from destroying the internal Al-N bonds, so the Al-polar surface is more stable than the N-polar surface.

The in-plane band bending effect around Au islands grown on the Bi2Te3 topological insulator

We have utilized scanning tunneling microscopy and spectroscopy (STM/STS) as well as x-ray linear dichroism (XLD) along with DFT calculations to determine the structural and electronic changes of the gold-covered nonstoichiometric Bi2Te3 single crystal surface. XLD spectra supported by a numerical simulation of several configurations show that at low coverage (< 1.0 ML) gold forms insoluble islands, while for higher coverage (> 1.0 ML) mixing at the Au/Bi2Te3 interface may occur. For local electronic characterization around stand-alone Au islands, small coverages were selected for which the inter-island distance is large enough to avoid overlapping island-wide effects. STS spectra reveal that for small coverages the topological surface states (TSS) are preserved. However, at a distance of about 10 nm from an Au island, by approaching the islands, the electronic structure gradually changes. This is manifested by a gradual shift of the STS spectra to more negative energies with respect to the pristine surface. The results are discussed in view of possible Au-Bi2Te3 mixing, a local charge transfer and the presence of in-plane downward band bending.

A physically-based mixed hardening model for the prediction of the ductility limits of thin metal sheets using a CPFE approach

An advanced Crystal Plasticity Finite Element (CPFE) approach is developed to accurately predict the ductility limit strains of thin metal sheets. This method uses polycrystalline unit cells to represent the metal sheets at the macroscopic level. The macroscopic behavior of these unit cells is determined based on that of the constituent single crystals using the periodic homogenization multiscale scheme. At the single crystal scale, the constitutive framework follows a finite strain rate-independent formulation, with the flow rule governed by the Schmid law. The evolution of the single crystal yield surface is described through a physically-based mixed hardening model, where isotropic hardening is characterized by a dislocation density-based formulation, while kinematic hardening is described by the nonlinear Armstrong–Frederick model. The unit cell ductility limit strains are predicted by the Rice bifurcation criterion. The reliability of the mixed hardening model in accurately reproducing mechanical behavior is confirmed through simulations of uniaxial tension/compression loading. Then, the developed computational strategy is used to investigate the impact of key microstructural hardening parameters on the initiation of localized necking under linear strain paths. The numerical predictions reveal the significant influence of these parameters on the formability of thin metal sheets. Additionally, the analysis of ductility limits under non-linear strain paths demonstrates a strong dependency of the numerical predictions on strain path changes. The numerical predictions obtained by the developed CPFE multiscale strategy are compared with experimental results from the literature. In summary, the proposed approach provides a reliable tool for accurately predicting the ductility limits of thin metal sheets, offering valuable insights for engineering applications.

Shape-interaction dualism: unraveling complex phase behavior in triangular particle monolayers

This paper examines the effect of finite attractive and repulsive interactions on the self-assembly of triangular-shaped particles on a triangular lattice. The ground state analysis of the lattice model has revealed an infinite sequence of ordered structures, a phenomenon referred to as the ‘devil’s staircase’ of phase transitions. The model has been studied at finite temperatures using both the transfer-matrix and tensor renormalization group methods. The concurrent use of these two methods lends credibility to the obtained results. It has been demonstrated that the initial ordered structures of the ‘devil’s staircase’ persist at non-zero temperatures. Further increase of the attraction between particles or a decrease of the temperature induces the appearance of subsequent ordered structures of the ‘devil’s staircase’. The corresponding phase diagram of the model has been calculated. The phase behavior of our model agrees qualitatively with the phase behavior of trimesic acid adsorption layer on single crystal surfaces.

Diamond surface functionalization via visible light–driven C–H activation for nanoscale quantum sensing

Nitrogen-vacancy (NV) centers in diamond are a promising platform for nanoscale NMR sensing. Despite significant progress toward using NV centers to detect and localize nuclear spins down to the single spin level, NV-based spectroscopy of individual, intact, arbitrary target molecules remains elusive. Such sensing requires that target molecules are immobilized within nanometers of NV centers with long spin coherence. The inert nature of diamond typically requires harsh functionalization techniques such as thermal annealing or plasma processing, limiting the scope of functional groups that can be attached to the surface. Solution-phase chemical methods can be readily generalized to install diverse functional groups, but they have not been widely explored for single-crystal diamond surfaces. Moreover, realizing shallow NV centers with long spin coherence times requires highly ordered single-crystal surfaces, and solution-phase functionalization has not yet been shown with such demanding conditions. In this work, we report a versatile strategy to directly functionalize C-H bonds on single-crystal diamond surfaces under ambient conditions using visible light, forming C-F, C-Cl, C-S, and C-N bonds at the surface. This method is compatible with NV centers within 10 nm of the surface with spin coherence times comparable to the state of the art. As a proof-of-principle demonstration, we use shallow ensembles of NV centers to detect nuclear spins from surface-bound functional groups. Our approach to surface functionalization opens the door to deploying NV centers as a tool for chemical sensing and single-molecule spectroscopy.

CO-Induced Dimer Decay Responsible for Gem-Dicarbonyl Formation on a Model Single-Atom Catalyst.

The ability to coordinate multiple reactants at the same active site is important for the wide-spread applicability of single-atom catalysis. Model catalysts are ideal to investigate the link between active site geometry and reactant binding, because the structure of single-crystal surfaces can be precisely determined, the adsorbates imaged by scanning tunneling microscopy (STM), and direct comparisons made to density functional theory. In this study, we follow the evolution of Rh1 adatoms and minority Rh2 dimers on Fe3O4(001) during exposure to CO using time-lapse STM at room temperature. CO adsorption at Rh1 sites results exclusively in stable Rh1CO monocarbonyls, because the Rh atom adapts its coordination to create a stable pseudo-square planar environment. Rh1(CO)2 gem-dicarbonyl species are also observed, but these form exclusively through the breakup of Rh2 dimers via an unstable Rh2(CO)3 intermediate. Overall, our results illustrate how minority species invisible to area-averaging spectra can play an important role in catalytic systems, and show that the decomposition of dimers or small clusters can be an avenue to produce reactive, metastable configurations in single-atom catalysis.

Toward High-Energy-Density Fuels for Direct Liquid Organic Hydrogen Carrier Fuel Cells: Electrooxidation of 1-Cyclohexylethanol.

Electrochemically active liquid organic hydrogen carriers (EC-LOHCs) can be used directly in fuel cells; so far, however, they have rather low hydrogen storage capacities. In this work, we study the electrooxidation of a potential EC-LOHC with increased energy density, 1-cyclohexylethanol, which consists of two storage functionalities (a secondary alcohol and a cyclohexyl group). We investigated the product spectrum on low-index Pt single-crystal surfaces in an acidic environment by combining cyclic voltammetry, chronoamperometry, and in situ infrared spectroscopy, supported by density functional theory. We show that the electrooxidation of 1-cyclohexylethanol is a highly structure-sensitive reaction with activities Pt(111) ≫ Pt(100) > Pt(110). Most importantly, we demonstrate that 1-cyclohexylethanol can be directly converted to acetophenone, which desorbs from the electrode surface. However, decomposition products are formed, which lead to poisoning. If the latter side reactions could be suppressed, the electrooxidation of 1-cyclohexylethanol would enable the development of EC-LOHCs with greatly increased hydrogen storage capacities.

Characteristics of the Discoloration Switching Phenomenon of 4H-SiC Single Crystals Grown by PVT Method Using ToF-SIMS and Micro-Raman Analysis.

The discoloration switching appearing in the initial and final growth stages of 4H-silicon carbide (4H-SiC) single crystals grown using the physical vapor transport (PVT) technique was investigated. This phenomenon was studied, investigating the correlation with linear-type micro-pipe defects on the surface of 4H-SiC single crystals. Based on the experimental results obtained using time-of-flight secondary ion mass spectrometry (ToF-SIMS) and micro-Raman analysis, it was deduced that the orientation of the 4H-SiC c-axis causes an axial change that correlates with low levels of carbon. In addition, it was confirmed that the incorporation of additional elements and the concentrations of these doped impurity elements were the main causes of discoloration and changes in growth orientation. Overall, this work provides guidelines for evaluating the discoloration switching in 4H-SiC single crystals and contributes to a greater understanding of this phenomenon.

On‐Surface Isomerization of Indigo within 1D Coordination Polymers

AbstractNatural products are attractive components to tailor environmentally friendly advanced new materials. We present surface‐confined metallosupramolecular engineering of coordination polymers using natural dyes as molecular building blocks: indigo and the related Tyrian purple. Both building blocks yield identical, well‐defined coordination polymers composed of (1 dehydroindigo : 1 Fe) repeat units on two different silver single crystal surfaces. These polymers are characterized atomically by submolecular resolution scanning tunnelling microscopy, bond‐resolving atomic force microscopy and X‐ray photoelectron spectroscopy. On Ag(100) and on Ag(111), the trans configuration of dehydroindigo results in N,O‐chelation in the polymer chains. On the more inert Ag(111) surface, the molecules additionally undergo thermally induced isomerization from the trans to the cis configuration and afford N,N‐ plus O,O‐chelation. Density functional theory calculations confirm that the coordination polymers of the cis‐isomers on Ag(111) and of the trans‐isomers on Ag(100) are energetically favoured. Our results demonstrate post‐synthetic linker isomerization in interfacial metal‐organic nanosystems.

On-Surface Isomerization of Indigo within 1D Coordination Polymers.

Natural products are attractive components to tailor environmentally friendly advanced new materials. We present surface-confined metallosupramolecular engineering of coordination polymers using natural dyes as molecular building blocks: indigo and the related Tyrian purple. Both building blocks yield identical, well-defined coordination polymers composed of (1 dehydroindigo : 1 Fe) repeat units on two different silver single crystal surfaces. These polymers are characterized atomically by submolecular resolution scanning tunnelling microscopy, bond-resolving atomic force microscopy and X-ray photoelectron spectroscopy. On Ag(100) and on Ag(111), the trans configuration of dehydroindigo results in N,O-chelation in the polymer chains. On the more inert Ag(111) surface, the molecules additionally undergo thermally induced isomerization from the trans to the cis configuration and afford N,N- plus O,O-chelation. Density functional theory calculations confirm that the coordination polymers of the cis-isomers on Ag(111) and of the trans-isomers on Ag(100) are energetically favoured. Our results demonstrate post-synthetic linker isomerization in interfacial metal-organic nanosystems.

Controlled Sixfold Symmetric Exfoliation of Oriented MoS2 Monolayers by Coulomb Force

AbstractAtoms, molecules, and nanoparticles can be spatially manipulated by an atomic force microscopy (AFM) tip, through van der Waals (vdW) and/or Coulomb forces. These point‐to‐point manipulations are highly accurate at nanoscale, facilitating the construction and modification of nanostructures. Nevertheless, it is difficult to manipulate 2D layers in vdW crystals by an AFM tip, because the tip‐induced attractive force is usually insufficient to outcompete the interlaminar vdW forces. Herein, manipulation of the surface layers on a MoS2 single crystal by a conductive AFM tip is successfully reported. By applying a bias between the tip and MoS2, the Coulomb attractive force allows the topmost MoS2 layers to be picked up. These exfoliated layers are deformed into micron‐sized bubbles with sixfold symmetry, which are composed of high‐quality monolayers and visually reflecting the hexagonal lattice orientation. The underlying mechanisms of the sixfold symmetric exfoliation and the formation of monolayers are discussed by in situ monitoring of the tunneling volt‐ampere characteristics and simulation of the force distribution. The findings open a new route to obtain high‐quality transition metal dichalcogenide (TMD) monolayers and their derived nanostructures on the surface of TMD single crystals for optoelectronic and photonic device applications.

High Sensitivity and Ultra-Broad-Range NH3 Sensor Arrays by Precise Control of Step Defects on The Surface of Cl2-Ndi Single Crystals.

Vapor sensors with both high sensitivity and broad detection range are technically challenging yet highly desirable for widespread chemical sensing applications in diverse environments. Generally, an increased surface-to-volume ratio can effectively enhance the sensitivity to low concentrations, but often with the trade-off of a constrained sensing range. Here, an approach is demonstrated for NH3 sensor arrays with an unprecedentedly broad sensing range by introducing controllable steps on the surface of an n-type single crystal. Step edges, serving as adsorption sites with electron-deficient properties, are well-defined, discrete, and electronically active. NH3 molecules selectively adsorb at the step edges and nearly eliminate known trap-like character, which is demonstrated by surface potential imaging. Consequently, the strategy can significantly boost the sensitivity of two-terminal NH3 resistance sensors on thin crystals with a few steps while simultaneously enhancing the tolerance on thick crystals with dense steps. Incorporation of these crystals into parallel sensor arrays results in ppb-to-% level detection range and a convenient linear relation between sheet conductance and semi-log NH3 concentration, allowing for the precise localization of vapor leakage. In general, the results suggest new opportunities for defect engineering of organic semiconductor crystal surfaces for purposeful vapor or chemical sensing.

Benzimidazolium quaternary ammonium salts: synthesis, single crystal and Hirshfeld surface exploration supported by theoretical analysis.

Owing to the broad applications of quaternary ammonium salts (QAS), we present the synthesis of benzimidazolium-based analogues with variation in the alkyl and alkoxy group at N-1 and N-3 positions. All the compounds were characterized by spectroscopic techniques and found stable to air and moisture both in the solid and solution state. Moreover, molecular structures were established through single-crystal X-ray diffraction studies. The crystal packing of the compounds was stabilized by numerous intermolecular interactions explored by Hirshfeld surface analysis. The enrichment ratio was calculated for the pairs of chemical species to acquire the highest propensity to form contacts. Void analysis was carried out to check the mechanical response of the compounds. Furthermore, theoretical investigations were also performed to explore the optoelectronic properties of compounds. Natural population analysis (NPA) has been conducted to evaluate the distribution of charges on the synthesized compounds, whereas high band gaps of the synthesized compounds by frontier molecular orbital (FMO) analysis indicated their stability. Nonlinear optical (NLO) analysis revealed that the synthesized QAS demonstrates significantly improved NLO behaviour than the standard urea.

Surface‐Engineered Methylammonium Lead Bromide Single Crystals: A Platform for Fluorescent Security Tags and Photodetector Applications

AbstractSurface/interface engineering of methylammonium lead bromide (MAPbBr3) single crystals (SCs) is crucial for carrier generation/recombination, separation, and transportation, thereby enabling superior optoelectronics. Herein, a surface‐engineered crystallization technique is presented in which a thin polycrystalline MAPbBr3 layer is in situ grown on the surface of bulk mm‐sized MAPbBr3 SCs. The growth direction and the atomic distribution of both the polycrystalline surface layer and the single crystalline core have been analyzed by damage‐free atomic‐resolution transmission electron microscopy (TEM). The polycrystalline nature of the crystals gives rise to bright green emission under UV light. Scanning probe microscopy results show that the current at the emissive MAPbBr3 film/MAPbBr3 SC surface is five times higher than that at a non‐emissive surface when illuminated. Lateral photodetectors based on MAPbBr3 film/MAPbBr3 SCs can achieve excellent detectivities (≈1013 Jones) and high photoresponsivities (≈20 A W−1). Furthermore, a semiconductor‐based fluorescence quick response (FQR) code is patterned on the same bright green‐emitting surface of the MAPbBr3 film/MAPbBr3 SC using a picosecond laser pulse, with a scalability of 3 × 3 mm2. An FQR code integrated with a photodetector may serve as a potential double security tag in bank cards, passports, door security, etc.

Polarization-Dependent Anisotropy of LIPSSs' Morphology Evolution on a Single-Crystal Silicon Surface.

Utilizing the principle of laser-induced periodic surface structures (LIPSSs), this research delves into the morphological evolution of single-crystal silicon surfaces irradiated by a near-infrared picosecond laser through a scanning mode. With the increase in laser energy density, the nanostructure morphology on single-crystal silicon surfaces induced by incident lasers with different polarization directions sequentially produces high spatial-frequency LIPSSs (HSFLs) with a period of 220 nm ± 10 nm parallel to the laser polarization, low spatial-frequency LIPSSs (LSFLs) with a period of 770 nm ± 85 nm perpendicular to the direction of the polarization, and groove structures. Furthermore, by varying the angle between the laser polarization and the scanning direction, the study examined the combined anisotropic effects of the laser polarization scanning direction angle and the laser polarization crystal orientation angle on the genesis of LIPSSs on single-crystal silicon (100) surfaces. The experiments revealed polarization-related anisotropic characteristics in the morphology of HSFLs. It was found that when the polarization angle approached 45°, the regularity of the LSFLs deteriorated, the modification width decreased, and the periodicity increased. This is critical for the precise control of the LSFLs' morphology.

Perovskite Single Crystals with Self‐Cleaning Surface for Efficient Photovoltaics

AbstractMetal halide perovskite single crystals are promising for diverse optoelectronic applications. As a universal issue of solution‐grown perovskite single crystals, surface contamination causes adverse effect on material properties and device performance. Herein, learning from the self‐cleaning effect of lotus leaf, we address the surface contamination issue by introducing an amphiphilic long‐chain organic amine into the perovskite crystal growth solution. Self‐assembly of CTAC provides a hydrophobic crystal surface, inducing spontaneous removal of residual growth solution, which results in clean surface and better optoelectronic properties of perovskite single crystals. An impressive efficiency of 23.4 % is obtained, setting a new record for FAxMA1‐xPbI3 single‐crystal perovskite solar cells (PSCs). Moreover, our strategy also applies to perovskite single crystals with different morphology and composition, which may contribute to improvement of other single‐crystal perovskite optoelectronic devices.

Perovskite Single Crystals with Self-Cleaning Surface for Efficient Photovoltaics.

Metal halide perovskite single crystals are promising for diverse optoelectronic applications. As a universal issue of solution-grown perovskite single crystals, surface contamination causes adverse effect on material properties and device performance. Herein, learning from the self-cleaning effect of lotus leaf, we address the surface contamination issue by introducing an amphiphilic long-chain organic amine into the perovskite crystal growth solution. Self-assembly of CTAC provides a hydrophobic crystal surface, inducing spontaneous removal of residual growth solution, which results in clean surface and better optoelectronic properties of perovskite single crystals. An impressive efficiency of 23.4 % is obtained, setting a new record for FAx MA1-x PbI3 single-crystal perovskite solar cells (PSCs). Moreover, our strategy also applies to perovskite single crystals with different morphology and composition, which may contribute to improvement of other single-crystal perovskite optoelectronic devices.

Dependence on the crystallographic orientation of Au single crystal surfaces modified with homocysteine toward enantioselective redox reactions

Abstract Effects of enantioselective interactions on redox reactions of chiral molecules were studied using Au single crystal electrodes modified with amino acids. The redox peak current densities of R(+)- or S(−)-N, N-dimethyl-1-ferrocenylethylamine on Au(111) modified with L- or D-homocysteine (L-/D-Hcy) depended on the combination of these chiralities. Hcy/Au(100) showed no dependence on redox peak current densities. The difference in the molecular arrangement of Hcy between Au(111) and Au(100) greatly affects enantioselective redox reactions at the electrode interface.