Single Bath Research Articles

The effects of chemical treatment parameters on the yield of bamboo fibers extracted

Nitric Acid and Hydrogen Peroxide (NCHP) treatment offers an efficient method for extracting lignocellulosic fibers from bamboo in a single bath. This procedure effectively removes lignin and hemicellulose, facilitating the separation of bamboo fibers while gradually breaking down inter-microfibrils and interlamellar layers in the cell wall. This study focuses on assessing the yield of lignocellulosic fibers extracted under various chemical treatment parameters and characterizing these fibers. Utilizing crushed and air-dried bamboo as raw material, cellulose, lignin, and hemicellulose content was analyzed. Characterization involved Fourier Transform Infrared (FTIR) Spectroscopy, providing insights into the chemical properties of the extracted lignocellulosic fibers. The FTIR spectra revealed the preservation and reinforcement of cellulose functional groups, confirming the effectiveness of the NCHP treatment. Control over treatment yield was achieved by manipulating temperature, concentration, and time. Optimal conditions were identified: 3.2 mol/L nitric acid, 60 mmol/g hydrogen peroxide, 50°C, and 72 hours, resulting in a maximum fiber yield of 76%. The findings indicate that higher temperatures, prolonged treatment times, and appropriate concentrations significantly enhance fiber extraction. Specifically, the optimal conditions led to an improved yield and better preservation of cellulose content compared to untreated bamboo. The study demonstrates that the NCHP treatment is a robust and effective method for producing high-quality lignocellulosic fibers from bamboo, with potential applications in sustainable materials. In conclusion, the NCHP treatment provides a scalable and efficient approach to extracting lignocellulosic fibers, offering significant improvements in yield and chemical composition. This process has promising implications for industrial applications, particularly in the development of sustainable materials and biocomposites

Active Brownian information engine: Self-propulsion induced colossal performance.

The information engine is a feedback mechanism that extorts work from a single heat bath using the mutual information earned during the measurement. We consider an overdamped active Ornstein-Uhlenbeck particle trapped in a 1D harmonic oscillator. The particle experiences fluctuations from an inherent thermal bath with a diffusion coefficient (D) and an active reservoir, with characteristic correlation time (τa) and strength (Da). We design a feedback-driven active Brownian information engine (ABIE) and analyze its best performance criteria. The optimal functioning criteria, the information gained during measurement, and the excess output work are reliant on the dispersion of the steady-state distribution of the particle's position. The extent of enhanced performance of such ABIE depends on the relative values of two underlying time scales of the process, namely, thermal relaxation time (τr) and the characteristic correlation time (τa). In the limit of τa/τr → 0, one can achieve the upper bound on colossal work extraction as ∼0.202γ(D+Da) (γ is the friction coefficient). The excess amount of extracted work reduces and converges to its passive counterpart (∼0.202γD) in the limit of τa/τr → high. Interestingly, when τa/τr = 1, half the upper bound of excess work is achieved irrespective of the strength of either reservoirs, thermal or active. Finally, we look into the average displacement of active Brownian particles in each feedback cycle, which surpasses its thermal analog due to the broader marginal probability distribution.

Pretreatment and dyeability analysis of cotton and novel Bauhinia vahlii fiber

The textile industry is witnessing a paradigm shift towards sustainable materials, prompting the exploration of novel natural fibers as alternatives to synthetic fibers to meet environmental standards and address the growing demand for eco-friendly and sustainable products. Different natural fibers possess varied properties and are suitable for numerous applications in conventional and technical textiles. The coloration of these textile materials is an important aspect of conventional textiles, which starts with the pretreatment of the material. This study introduces a novel blend of cotton and Bauhinia vahlii fiber, a lesser-known natural cellulosic fiber with promising textile properties, and evaluates its pretreatment outcomes and dyeability characteristics. The study employs a systematic approach to pretreat the cotton and Bauhinia vahlii fiber blend (cotton: Bauhinia vahlii fiber 70:30) in a single bath using a conventional combined scouring bleaching process. The pretreatment process is carried out two times with varied sodium hydroxide (NaOH) and hydrogen peroxide (H2O2) concentrations for different processing times at 90 °C to assess the component fibers’ whiteness index, union bleaching balance, and weight loss percentage under diverse pretreatment conditions. Each time, 50% of the chemicals were used and continued for half of the processing time. The dyeability of the treated fibers is analyzed by dyeing the same in a single bath using amron bright red HF2R bifunctional reactive dye in varied shade depths (1%, 3%, and 5%) and fiber blend ratios (cotton: Bauhinia vahlii fiber 100:0, 90:10, 80:20, 70:30, and 0:100) to assess the color strength, union dyeing balance, and fastness properties. The maximum whiteness was achieved with 6 g per liter (gpl) of NaOH and H2O2 and at a processing time of 150 min with a whiteness index of 80.46 and 54.34 of cotton and Bauhinia vahlii fiber, respectively, with a union bleaching balance of 1.48. The dyed fibers’ colorimetric results confirm that Bauhinia vahlii fiber gives higher color strength than cotton fiber, irrespective of shade depth and blend ratio. The union dyeing balance of 1.2 was achieved at 5% shade depth with a 70:30 cotton Bauhinia vahlii fiber blend. This research contributes to the conventional textile field by introducing a sustainable fiber blend that reduces reliance on synthetic fiber and opens new avenues for utilizing Bauhinia vahlii fiber in conventional textile manufacturing.

One-Bath One-Step Dyeing of Polyester/Cotton Blend Fabrics Through Lipase Enzyme Surface Modification

ABSTRACT In this study, based on lipase enzyme surface modification, low-temperature dyeing of polyester/cotton fabric with reactive dyes was researched to achieve a one-bath one-step dyeing method. The Box-Behnken method was used to conduct the experiment and determine factors. For surface modification, lipase concentration, reaction time, and treatment temperature were considered, whereas for the dyeing process, reactive dye concentration, dyeing time, and dyeing temperature were taken into account to measure color strength. A treatment temperature of 30°C, a lipase enzyme concentration of 14 w/v %, and a treatment time of 50 min were shown to be ideal or optimum surface treatment parameters for lipase enzyme surface modification. The optimal or ideal conditions for the dyeing process were a reactive dye concentration of 2.13 w/v%, dyeing time of 50 min, and dyeing temperature of 66°C, giving a color strength value of 3.02. Lipase enzyme-modified polyester/cotton (p/c) blend fabrics provide color fastness that is all over grades 3–4, including washing fastness, rubbing fastness, perspiration fastness, and light fastness. The outcomes raise the prospect of developing a new technique for dying polyester/cotton blend fabric in a single bath using a single dye class that is typically employed for dying textiles made of cellulosic material.

Path Integral Formalism of Open Quantum Systems with Non-Diagonal System-Bath Coupling

Abstract Most path integral expressions for quantum open systems are
formulated with diagonal system-bath coupling, where the influence
functional is a functional of scalar valued trajectories. This
formalism is enough if only a single bath is under
consideration. However, when multiple baths are present,
non-diagonal system-bath couplings need to be taken into
consideration. In such a situation, using an abstract Liouvillian
method, the influence functional can be obtained as a functional of
operator valued trajectories. The value of influence functional
itself also becomes a superoperator rather than an ordinary scalar,
whose meaning is ambiguous at first glance and its connection to
conventional understanding of the influence functional needs extra
careful considerations. In this article, we present another concrete
derivation of the superoperator valued influence functional based on
the straightforward Trotter-Suzuki splitting, which can provide a clear
picture to interpret the superoperator valued influence functional.

Entropy production in the mesoscopic-leads formulation of quantum thermodynamics.

Understanding the entropy production of systems strongly coupled to thermal baths is a core problem of both quantum thermodynamics and mesoscopic physics. While many techniques exist to accurately study entropy production in such systems, they typically require a microscopic description of the baths, which can become numerically intractable to study for large systems. Alternatively an open-systems approach can be employed with all the nuances associated with various levels of approximation. Recently, the mesoscopic leads approach has emerged as a powerful method for studying such quantum systems strongly coupled to multiple thermal baths. In this method, a set of discretized lead modes, each locally damped, provide a Markovian embedding. Here we show that this method proves extremely useful to describe entropy production of a strongly coupled open quantum system. We show numerically, for both noninteracting and interacting setups, that a system coupled to a single bath exhibits a thermal fixed point at the level of the embedding. This allows us to use various results from the thermodynamics of quantum dynamical semigroups to infer the nonequilibrium thermodynamics of the strongly coupled, non-Markovian central systems. In particular, we show that the entropy production in the transient regime recovers the well-established microscopic definitions of entropy production with a correction that can be computed explicitly for both the single- and multiple-lead cases.

Electroplating of Palladium‐Based Integrated Reactive Multilayer Systems (iRMS)

Bonding with integrated reactive material systems enables joining of heterogeneous substrates at room temperature. The increasing diversity of electronic modules raises the demand for low temperature bonding processes for heat sensitive components. In this article, fundamental steps for the deposition of Pd/In multilayers from a single bath electrolyte are presented. It furthermore describes the deposition of Pd/Sn reactive multilayers for bonding application on ceramic substrates and introduces a new semi‐automated plating tool for Pd/Sn multilayers. The Pd/Sn multilayers can be deposited reproducible on silicon and ceramic substrates. While a bilayer period of 425 nm enables stable ignition and bonding of Si substrates, the bilayer period for ceramics has to be increased to 620 nm to compensate the higher heat dissipation into the substrate. By integrating 2.5–9 μm thick Sn compensation layers beneath the integrated reactive multilayer systems (iRMS) to smoothen the surface profile of the printed metallization and improved bonding processes with wedge compensation, a homogeneous bond along the whole interface can be achieved.

Enhanced entanglement in multi-bath spin-boson models

The spin-boson model usually considers a spin coupled to a single bosonic bath. However, some physical situations require coupling of the spin to multiple environments. For example, spins interacting with phonons in three-dimensional magnetic materials. Here, we consider a spin coupled isotropically to three independent baths. We show that coupling to multiple baths can significantly increase entanglement between the spin and its environment at zero temperature. The effect of this is to reduce the spin's expectation values in the mean force equilibrium state. In contrast, the classical three-bath spin equilibrium state turns out to be entirely independent of the environmental coupling. These results reveal purely quantum effects that can arise from multi-bath couplings, with potential applications in a wide range of settings, such as magnetic materials.

Pulse electrodeposition of CuSbS2 thin films: Role of Cu/Sb precursor ratio on the phase formation and its performance as photocathode for hydrogen evolution§

In this paper, we outline the development of stoichiometric chalcostibite, CuSbS2 thin films, from a single bath by pulse electrodeposition for its application as a photocathode in photoelectrochemical cells (PEC). The Cu/Sb precursor molar ratio of the deposition bath was varied to obtain stoichiometric CuSbS2 thin films. The optimized deposition and dissolution potentials were −0.72 V and −0.1 V vs saturated calomel electrode, respectively. The formation of CuSbS2 was analyzed using different characterization tools. X-ray diffraction and Raman results showed the formation of the pure chalcostibite phase from a precursor bath with molar ratio Cu/Sb = 0.41. The heterostructure CuSbS2/CdS/Pt was tested as a photocathode in the PEC. The energy positions of the conduction and valence bands were estimated from the Mott Schottky plots. The conduction band and valence band offset of CuSbS2/CdS heterojunction were 0.1 eV and 1.04 eV, respectively. The electric field created in the junction reduced the recombination of the electron/hole pairs and improved charge transfer in the interface. The heterostructure CuSbS2/CdS/Pt demonstrated an improved photocurrent density of 3.4 mA cm−2 at 0 V vs reversible hydrogen electrode. The PEC efficiency obtained from the CuSbS2/CdS heterojunction was 0.56 %. Therefore, we demonstrated the feasibility of an inexpensive technique like electrodeposition for the development of an efficient earth-abundant photocathode.

Resource engines

In this paper we aim to push the analogy between thermodynamics and quantum resource theories one step further. Previous inspirations were based predominantly on thermodynamic considerations concerning scenarios with a single heat bath, neglecting an important part of thermodynamics that studies heat engines operating between two baths at different temperatures. Here, we investigate the performance of resource engines, which replace the access to two heat baths at different temperatures with two arbitrary constraints on state transformations. The idea is to imitate the action of a two–stroke heat engine, where the system is sent to two agents (Alice and Bob) in turns, and they can transform it using their constrained sets of free operations. We raise and address several questions, including whether or not a resource engine can generate a full set of quantum operations or all possible state transformations, and how many strokes are needed for that. We also explain how the resource engine picture provides a natural way to fuse two or more resource theories, and we discuss in detail the fusion of two resource theories of thermodynamics with two different temperatures, and two resource theories of coherence with respect to two different bases.

Redox profile of silver catfish challenged with Aeromonas hydrophila and treated with hexane extract of Hesperozygis ringens (Benth.) Epling through immersion bath.

The growing increase in the fish farming sector has favored the establishment of bacterial outbreaks caused by Aeromonas hydrophila in several species. The hexane extract of Hesperozygis ringens (HEHR) (Lamiaceae) leaves increased the survival rate of silver catfish (Rhamdia quelen) experimentally infected by A. hydrophila. However, it is noteworthy that no reports have been found on the possible mechanisms of action of this extract in infected fish. This study aimed to evaluate the effect of the HEHR, administered through single immersion bath, on lipid peroxidation and antioxidant defenses in muscle and liver tissue of silver catfish challenged with A. hydrophila. The results showed that the oxidative status of silver catfish was altered, although oxidative stress was not triggered during the experiment. HEHR at 30 mg/L (HEHR30) was not characterized as a pro-oxidant agent in the presence of infection, unlike florfenicol and HEHR at 15 mg/L treatments in some cases. In short, HEHR30 provided an important increase in hepatic catalase activity, characterizing one of the possible mechanisms involved in the greater survival of fish experimentally infected by A. hydrophila. Additionally, HEHR30 did not induce lipid peroxidation, nor reduced antioxidant defenses of silver catfish infected or not by A. hydrophila.

High Entropy Alloy Deposition from an Aqueous Bath

A new alloy design approach based on the concept of high entropy alloy (HEA) has attracted attention during the last few years. HEA is defined as an alloy composed of five or more principal elements with a concentration between 5 and 35 at% of each element. Depending on the combinations of the elements, HEA could show high resistance to corrosion, fatigue and fracture toughness besides unique electrical and magnetic responses. The outstanding characteristic of HEA is attributed to the high mixing entropies and the severe lattice distortion related to the addition of multiple components. Due to this unique combination of properties and the potential for designing a wide variety of new materials, interests have been directed toward high entropy alloy films and coatings for applications where corrosion and oxidation protection are strongly required. This study attempted to deposit five elements (Ni-Co–Cu–Mo-W) from an aqueous bath on a low-carbon steel substrate by the direct current. The goal was to combine the properties of Ni-Co-Cu with Ni-W and Ni-Mo coatings. In this case, a HEA coating can be produced, which might maintain corrosion and wear resistance even at high temperatures and be suitable for application in aggressive environments. To understand better the role of entropy on the coatings properties, three electroplating systems were designed, including electroplating of five elements (Ni-Co-Cu-Mo-W), which was compared with electroplating of four elements (Ni-Co-Cu-W) and (Ni-Co-Mo-W). In this case, systems with different configuration entropy can be produced, and by characterizing them, the relationship between the entropy and the properties of the coating might be cleared.Electrodeposition was carried out in Hull-cell to find the alloy deposition's proper working window. The role of different parameters such as pH, current density, and complex agent on the coating's composition was studied. The morphology and composition of the Hull-cell coatings were checked by scanning electron microscopy (SEM) equipped with energy dispersive spectroscopy along with X-ray fluorescence spectroscopy. Finally, the hardness and corrosion resistance of the coatings was studied by the nanoindentation technique and polarization in NaCl. This study developed a single aqueous bath for the electrodeposition of Ni-Co-Cu-Mo-W, Ni-Co-Cu-W and No-Co-Mo-W, and suitable deposition conditions were determined. It was shown that besides the metal concentration ratio, pH was the most influential parameter in the codeposition of elements with different deposition mechanisms. Ni and Co were the main inducing elements in the deposition of Mo and W than Cu. In addition, Ni, Co, Mo and W deposited uniformly, while Cu showed a different behavior. A competition between Mo and W deposition was seen, and Mo deposited more preferentially than W. The coatings showed weak passivity behavior and comparison between coating’s corrosion resistance was a challenge since their corrosion behavior does not only depend on coating composition but also on coatings compactness and integrity. By comparing the nano-hardness of the coatings, it was seen that the Ni-Co-Cu-W system with even the lowest configurational entropy has the highest hardness value. Keywords: Electrodeposition; High entropy alloy; Alloy deposition; hardness; Corrosion resistance

Ru–Co alloy coatings electrodeposited on a MAX phase substrate as efficient catalysts for the hydrogen evolution reaction

This study investigates the structure, electrochemical behavior and hydrogen evolution reaction (HER) performance of electrodeposited Ru–Co alloy coatings. The alloys were prepared from a 0.75 M Co2+ + 0.025 M Ru3+ solution at various potentials ranging from −0.5 to −1.2 V vs. SCE. Results reveal that the Ru and Co deposition processes are interdependent. The deposition of nobler Ru from the mixed metal solution reaches pure diffusion control already at −0.7 V compared to −1.0 V from a single Ru bath. On the other hand, Co deposition is significantly facilitated in the presence of Ru in the solution. Consequently, as the deposition potential changes from −0.6 to −1.0 V, Ru–Co solid solution coatings characterized by a distinct globular morphology are formed, with their Co content increasing from 22.1/7.4 to 70.2/86.1 wt% for the Cu/Ti2AlC MAX phase substrate applied. The alloy catalysts are found to show much better HER activity and stability in alkaline than in acidic solutions. The best Ru–Co@Ti2AlC sample, electrodeposited at −0.6 V, requires an overpotential of only −95 mV to deliver a current density of −100 mA cm−2 in 1 M KOH, thus outperforming most Ru–Co-based HER electrocatalysts reported to date.

Моделирование процесса селективного лазерного плавления в аддитивном производстве

The possibilities of theoretical analysis based on numerical modeling of complex processes of additive manufacturing by selective laser melting method are viewed. Methods of high-precision modeling of the formation of a single melt bath are discussed, taking into account the geometry of the formed powder layer, the energy distribution in the spot, the effects of ray re-reflection, the vapor recoil force, the Marangoni effect and denudation mechanisms. Experimental studies on the cultivation of samples from BrX copper powder with particles of 20...50 microns in size by selective laser melting using continuous fiber laser radiation with a wavelength of 1.064 microns were carried out. In particular, all the experiments were carried out under conditions when growing conditions and modes are completely coincident with the calculated model. To assess the accuracy of the modeling system, the dimensions of the melting region and the morphology of the surface of the melt were compared. The presented computational model was used in the development of technology for growing products from copper alloy powders using selective laser melting method. Research in the field of modeling the stress-strain state in a composite material formed in the SLP process, consisting of an Ak9ch alloy matrix reinforced with titanium carbide particles, is also presented. Calculations were performed to identify the influence of shape (sphere, icosahedron, prism), size (1,0 microns; 5,0 microns; 10 microns) and mass concentration 
 (1,0 %; 3,0 %; 5,0 %; 7,0 %; 10 %; 15 %), taking into account the presence of pores of various shapes. The results of calculations are compared with the results of experiments. Numerical models with subsequent experimental approbation of the optimal variant make it possible to significantly reduce the time spent for the development of new complex and promising additive technologies.

Real-time broadening of bath-induced density profiles from closed-system correlation functions.

The Lindblad master equationis one of the main approaches to open quantum systems. While it has been widely applied in the context of condensed matter systems to study properties of steady states in the limit of long times, the actual route to such steady states has attracted less attention yet. Here, we investigate the nonequilibrium dynamics of spin chains with a local coupling to a single Lindblad bath and analyze the transport properties of the induced magnetization. Combining typicality and equilibration arguments with stochastic unraveling, we unveil for the case of weak driving that the dynamics in the open system can be constructed on the basis of correlation functions in the closed system, which establishes a connection between the Lindblad approach and linear response theory at finite times. In this way, we provide a particular example where closed and open approaches to quantum transport agree strictly. We demonstrate this fact numerically for the spin-1/2 XXZ chain at the isotropic point and in the easy-axis regime, where superdiffusive and diffusive scaling is observed, respectively.

Self-passivated CdS buffer layer for antimony sulfide solar cells

Sb2S3 has been paid extensive attentions as absorber for solar cells. Comparing with some oxides, CdS exhibits excellent compatibility to Sb2S3 therefore is most commonly used as buffer layer (BL) materials for Sb2S3 solar cells. Proper passivation can enhance the performance of CdS buffer layer thus raising the performances of Sb2S3 solar cells. Herein, we put forward a self-passivation strategy to enhance the performance of CdS by a two-step deposition process to fabricate the self-passivated CdS BL. First, we adopted spin coating combined with annealing process to prepare flaked CdS on FTO, then we performed passivation process to the CdS by depositing another layer of CdS with chemical bath deposition (CBD) method. After Sb2S3 was deposited on the self-passivated CdS by hydrothermal method, a solar cell with FTO/CdS (∼90 nm)/Sb2S3 (160 nm)/Spiro-OMeTAD(48 nm)/Ag(32 nm)structure was obtained by deposition of hole transport layer and Ag electrodes. Comparing with the single spin-coating processed CdS BL or single chemical bath deposited CdS BL, the self-passivated CdS presents better performance. The CBD process presents distinctive passivation effects to the first layer. In consequence, we obtained the highest PCE of 6.04 % in the Sb2S3 solar cells on the self-passivated CdS BL. The present work supplies a unique route to enhance the performances of CdS buffer layer.

Design and Evaluation of Composite Magnetic Iron-Platinum Nanowires for Targeted Cancer Nanomedicine.

The purpose of the study was to synthesize and investigate the influence of geometrical structure, magnetism, and cytotoxic activity on core-shell platinum and iron-platinum (Fe/Pt) composite nanowires (NWs) for potential application in targeted chemotherapeutic approaches. The Pt-NWs and Fe/Pt composite NWs were synthesized via template electrodeposition, using anodic aluminum oxide (AAO) membranes. The Fe/Pt composite NWs (Method 1) was synthesized using two electrodeposition steps, allowing for greater control of the diameter of the NW core. The Fe/Pt composite NWs (Method 2) was synthesized by pulsed electrodeposition, using a single electrolytic bath. The properties of the synthesized NWs were assessed by high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, powder X-ray diffraction (XRD), inductively coupled plasma-optical emission spectrometry (ICP-OES), vibrating-sample magnetometry (VSM), and surface charge (zeta potential). A microscopy image analysis of the NWs revealed the presence of high-aspect-ratio NWs with nominal diameters of 40-50 nm and lengths of approximately <4 µm. The obtained powder XRD patterns confirmed the presence of a polycrystalline structure for both Pt NWs and Fe/Pt composite NWs. The potential utility of the synthesized NW nanoplatforms for anticancer activity was investigated using Tera 1 cells and Mouse 3T3 cells. Pt-NWs displayed modest cytotoxic activity against Tera 1 cells, while the Fe/Pt composite NWs (both Methods 1 and 2) demonstrated enhanced cytotoxic activity compared to the Pt-NWs on Tera 1 cells. The Fe/Pt composite NWs (Method 1) displayed ferromagnetic behavior and enhanced cytotoxic activity compared to Pt-NWs on Tera 1 cells, thus providing a sound basis for future magnetically targeted chemotherapeutic applications.

Anthelmintic effects of peppermint (Mentha piperita), lemon (Citrus limon), and tea tree (Melaleuca alternifolia) essential oils against Monogenean parasite (Dactylogyrus sp.) on carp (Cyprinus carpio).

Dactylogyrus sp. (Monogenea) is one of the most dangerous pathogens causing parasitic infections in carp (Cyprinus carpio) and other freshwater fish. Due to the adverse effects of conventional chemical treatments on the environment and fish, the use of herbal products in aquaculture against various diseases has increased. In the present study, anthelmintic effects of peppermint (Mentha piperita), lemon (Citrus limon), and tea tree (Melaleuca alternifolia) essential oils against Dactylogyrus sp. found on the gills of carp were studied using in vitro and in vivo experiments. In in vitro experiments, 1, 2.5, 5, and 10 μl/ml concentrations of these essential oils were tested on the parasites and cumulative mortalities were observed to reach 100 % after treatment with peppermint, lemon, and tea tree essential oils of 1 μl/ml concentration in approximately 15, 10 and 2 min, respectively. The in vitro experiments demonstrated that the cumulative mortality of the parasites increased with essential oil concentration and exposure duration. As the concentration of essential oil used increased, the observed mean time to death of parasites decreased. In in vivo experiments, median effective concentrations (EC50) as assessed by in vitro tests for peppermint and lemon essential oils in 5 min exposure and EC50 concentration for tea tree essential oil in 2 min exposure was applied on fish as a single bath and there was a significant decrease in the mean parasite intensities (p<0.05). Antiparasitic efficacies of peppermint, lemon, and tea tree essential oils were determined as 28.23 %, 30.95 %, and 35.31 %, respectively. The tea tree oil was the most effective and peppermint oil was the least effective in both in vitro and in vivo experiments. All three herbal essential oils tested in this study have weak antiparasitic potential against monogenean infections in fish.

Cu(InGa)(SeS)2 Electrodeposition from a Single Bath Using Pulsing Current Technique

Cu(In,Ga)(S,Se)2 (CIGSS) due to its greater band gap, has potential advantages over CuInGaSe2 (CIGS) as a photovoltaic film. Due to its lower capital cost and relatively high productivity, electrodeposition is a particularly appealing method for producing such solar materials (1-5). However, none describes the full production of such a molecule without the necessity for extra sulfur addition from the vapor phase4. Several recent articles disclose CIGSS electrodeposition. We introduce here the pulsing current method to dilute electrolytes used in previous work (6-7). Because of the diluted electrolyte composition, CIGSS can be directly electrodeposited from a single bath with a pulsing technique. The bath composition is 0.45 mM CuCl2-H2O; 0.4 mM InCl3; 0.77 mM H2SeO3; 0.51 mM GaCl3; and 0.3 mM Na2S2O3. PHydrion is applied to buffer the electrolyte to pH=2, and 0.7 M LiCl is applied as a supporting electrolyte. The flow was quantitatively characterized by agitation electrodeposition, which was done at room temperature onto a revolving disk electrode. Mass transport's impacts on deposit composition and substrate adherence are examined in various electrode rotation speeds and are represented by sample polarization curves. There was no requirement for the inclusion of metals from the gas phase during the subsequent annealing stage, which was carried out in an argon atmosphere. Two separate samples of absorber were evaluated for final sulfur atomic ratios of 5% and 15%. Utilizing the Energy-dispersive X-ray spectroscopy method, the final composition was calculated (EDS). CIGSS crystallography was analyzed using the XRD method.

Residual tissue magnesium concentration in jellyfish (Aurelia aurita and Cassiopea andromeda) following magnesium chloride euthanasia.

Magnesium chloride in high concentration is used for euthanasia of jellyfish to limit overpopulation and for predatory species consumption, but its use could lead to magnesium bioaccumulation and subsequent negative effects in consumers. Two species of scyphozoan jellyfish (Cassiopea andromeda and Aurelia aurita) were subjected to freezing (control), or magnesium chloride baths (144 g/L), with subsequent 30 min baths (one or two) in fresh artificial saltwater and submitted for inductively coupled plasma analysis to determine tissue concentration. Frozen jellyfish consistently yielded the lowest magnesium concentrations, while magnesium chloride euthanized individuals contained the highest concentrations in both species. C. andromeda displayed a significantly higher (p < .05) magnesium absorption capacity than A. aurita in both trials. Single and double baths significantly decreased magnesium concentrations (p < .05) in both species, however, magnesium remained consistently elevated compared to frozen specimens. This study demonstrated species-specific magnesium accumulation in jellyfish posteuthanasia and that rinsing was an effective method to limit excessive magnesium that could be deleterious to animals in public display aquaria. Magnesium concentrations of tissue and receiving water should be tested if magnesium chloride euthanasia is utilized for dietary supplementation in small bodies of water.