Single Arc Research Articles

Reduced basis method for the elastic scattering by multiple shape-parametric open arcs in two dimensions

We consider the elastic scattering problem by multiple disjoint arcs or cracks in two spatial dimensions. A key aspect of our approach lies in the parametric description of each arc's shape, which is controlled by a potentially high-dimensional, possibly countably infinite, set of parameters. We are interested in the efficient approximation of the parameter-to-solution map employing model order reduction techniques, specifically the reduced basis method. Initially, we utilize boundary potentials to transform the boundary value problem, originally posed in an unbounded domain, into a system of boundary integral equations set on the parametrically defined open arcs. Our aim is to construct a rapid surrogate for solving this problem. To achieve this, we adopt the two-phase paradigm of the reduced basis method. In the offline phase, we compute solutions for this problem under the assumption of complete decoupling among arcs for various shapes. Leveraging these high-fidelity solutions and Proper Orthogonal Decomposition (POD), we construct a reduced-order basis tailored to the single arc problem. Subsequently, in the online phase, when computing solutions for the multiple arc problem with a new parametric input, we utilize the aforementioned basis for each individual arc. To expedite the offline phase, we employ a modified version of the Empirical Interpolation Method (EIM) to compute a precise and cost-effective affine representation of the interaction terms between arcs. Finally, we present a series of numerical experiments demonstrating the advantages of our proposed method in terms of both accuracy and computational efficiency.

Microstructural Stability and High-Temperature Oxidation Behavior of Al0.25CoCrCuFeNi High Entropy Alloy

Al0.25CoCrCuFeNi is a high-entropy alloy composed of transition metals, specifically designed for high-temperature applications owing to its favorable mechanical properties, high melting point, and excellent high-temperature resistance. This alloy has been identified as a promising material for space exploration, particularly in the fabrication of combustion chambers and rocket nozzles by the National Aeronautics and Space Agency. Ongoing alloy development involves modifying the elemental composition. This study reduced aluminum content in the equiatomic AlCoCrCuFeNi alloy to Al0.25CoCrCuFeNi, followed by isothermal oxidation treatments at 800, 900, and 1000℃. A series of experiments were conducted to investigate the microstructure stability and oxidation behavior of the Al0.25CoCrCuFeNi alloy. The alloying elements were melted using a single DC electric arc furnace, followed by homogenization at 1100°C for 10 hours in an inert atmosphere. Subsequently, samples were cut into coupons for isothermal oxidation testing at the desired temperatures for 2, 16, 40, and 168 hours. The oxidized samples were characterized using XRD (x-ray diffraction), SEM (scanning electron microscopy) equipped with EDS (energy-dispersive X-ray spectroscopy), optical microscopy, and Vickers hardness testing. The as-homogenized alloy consisted of two constituent phases: an FCC (face-centered cubic) phase in the dendritic region and a copper-rich FCC phase in the inter-dendritic region. The oxides formed during the oxidation process included Al2O3, Cr2O3, Fe3O4, CoO, CuO, NiO, and spinel oxides (Co,Ni,Cu)(Al,Cr,Fe)2O4), with distinct formation mechanisms at each temperature.

Emulating the Delivery of Sawtooth Proton Arc Therapy Plans on a Cyclotron-Based Proton Beam Therapy System

Purpose: To evaluate and compare the deliverability of ‘sawtooth’ proton arc therapy (PAT) plans relative to static intensity modulated proton therapy (IMPT) at a cyclotron-based clinical facility. Methods: The delivery of single and dual arc Sawtooth PAT plans for an abdominal CT phantom and multiple clinical cases of brain, head and neck (H&N) and base of skull (BoS) targets was emulated under the step-and-shoot and continuous PAT delivery regimes and compared to that of a corresponding static IMPT plan. Results: Continuous PAT delivery increased the time associated with beam delivery and gantry movement in single/dual PAT plans by 4.86/7.34 min (brain), 7.51/12.40 min (BoS) and 6.59/10.57 min (H&N) on average relative to static IMPT. Step-and-shoot PAT increased this delivery time further by 4.79 min on average as the delivery was limited by gantry motion. Conclusions: The emulator can approximately model clinical sawtooth PAT delivery but requires experimental validation. No clear benefit was observed regarding beam-on time for sawtooth PAT relative to static IMPT.

Dissimilar joining of Ti–6Al–4V to 316L stainless steel by a novel joining process based on arc additive manufacturing and combined twin-wire arc welding

The joining structure of Ti–6Al–4V to 316L stainless steel has potential demands in many fields. However, it is very difficult to avoid the formaiton of intermetallic compounds (IMCs) of the weld between Ti–6Al–4V to 316L stainless steel, which will severely decrease joint properties. In this paper, a novel joining technology that combines the single wire backing arc welding and the spatially arranged combined twin-wire arc welding was utilized to join Ti–6Al–4V and 316L stainless steel. Copper alloy wire (S214) and vanadium alloy wire (V01) were used as filler metals to produce two isolation layers, which prevented the formation of IMCs. The phase compositions at the Fe/Cu, Cu/V and V/Ti interfaces were Fe(S,S) + Cu(S,S), Cu(S,S) + V(S,S) and V(S,S)+(β-Ti, V)SS respectively. The distribution of the spherical and clustered V(S,S) particles in the matrix at the Cu/V interface contributes to dispersion strengthening and solid solution strengthening of the interface. Tensile strength of 394 MPa with an elongation of 2.53% was achieved. The joint fractured at the Cu/V interface of the single wire backing arc weld and the Cu zone of the spatially arranged combined twin-wire arc weld respectively. Dimple plastic fracture modes were detected in the joints. This technology is not only applicable to Ti–6Al–4V titanium alloy/316L stainless steel dissimilar metal joining, but also provides a new research strategy for the joining between other dissimilar metals.

Repetitive shock waves generated by a single long pulse underwater arc discharge

The electrohydraulic effect induced by underwater arc discharge is an efficient way to generate controllable, high-intensity shock waves. However, the development process of underwater arc discharge involves the complex coupling of plasma arc, gas bubble, and liquid medium, of which the evolution mechanism is not well understood. In this paper, the underwater arc discharge process at a millisecond pulse (>50 ms) was investigated by high-speed shadow imaging and colorimetric temperature measurement, and a simulation model of bubble pulsation was proposed to quantitatively estimate the state variation and energy transfer of the gas bubble. The results indicate that the whole arc discharge process can be categorized into three successive stages: short-period oscillation, long-period oscillation, and quasi-steady state. The vapor inside the bubble can reach a supercritical state (827 K and 140 MPa) at the minimum bubble radius. The simulation shows that the light radiation absorption and the heat conduct loss through metal electrodes are the two dominant factors influencing the pulsation of the bubble, and further analysis indicates that the dynamic evolution of the arc determines the bubble pulsation mode. Our findings demonstrate why and how repetitive electrohydraulic shock waves can be generated by a single long pulse underwater arc discharge, providing a low-cost way of shock wave generator based on an AC/DC high-voltage power source.

Exploring the AC conductivity and dielectric properties of PVA films doped with Erythrosin B

Erythrosin B (EB) doped in PVA film was processed utilizing the casting procedure, and the structure was investigated via the Fourier Transformation infrared technique (FTIR). FTIR analysis presented a strong formation of intermolecular hydrogen bonds among PVA and EB hydroxyl groups (OH). Characteristic temperature and frequency variation of dielectric behavior and AC electrical conductivity for films of PVA doped with Erythrosin B were analyzed at (293–383 K) temperature and (102–106 Hz) frequency. The AC conductivity dependency indicates that the predominant conduction mechanism in PVA doped with Erythrosin B films follows the correlated barrier hopping (CBH) model. The charge carriers’ hopping involving localized states causes a relaxation process. Estimates were made for the AC conductivity activation energy and the conductivity relaxation energy. Frequency and temperature affect the dielectric constant (ε′) and the dielectric loss (ε″). The complex impedance spectrum (Z′ versus Z″) showed single semicircular arcs with a decreased radius with increasing temperature. The relaxation peaks in the electric modulus representation are clearly defined, and the relaxation period has been calculated.

Ablative Radiation Therapy for Unfavorable Prostate Tumors (ABRUPT): Preliminary Analysis of Toxicity and Quality of Life from a Prospective Study

To assess late gastrointestinal (GI) and genitourinary (GU) side effects in patients with organ-confined unfavorable prostate cancer (PCa) treated with single-dose ablative radiation therapy (SDRT). Thirty patients enrolled in a single-arm prospective trial received 24 Gy SDRT to the whole prostate with urethra-sparing and organ motion control delivered on a Linac platform with a 10 MV flattening filter-free single partial arc. Androgen deprivation therapy was prescribed as per standard of care. Treatment-related acute and late GU and GI toxicities (Common Terminology Criteria for Adverse Events_v5 scale) and quality of life (QoL) outcomes (European Organisation for Research and Treatment of Cancer [EORTC] QLQ-PR25/C30, International Prostate Symptom Score [IPSS]) were assessed at different time points. Minimal important difference (MID) was established as a change of >0.5 pooled standard deviations from baseline. Statistical analysis included analysis of variance and logistic regression. Median follow-up was 18 months (range, 6-31 months), with no ≥G3 late side effects observed. G2 late GI and G2 late GU toxicities occurred in 1 and 2 patients, respectively. GI toxicity of any grade correlated with maximum rectal dose (P = .021). Lower baseline QoL score (P = .025), higher baseline IPSS score (P = .049), acute GU toxicity (P = .029), and acute urinary domain MID (P = .045) predicted GU toxicity of any grade. In multivariate analysis (MVA), only baseline QoL score (odds ratio [OR], 0.95, P = .031) and acute GU toxicity (OR, 8.4, P = .041) remained significant. Significant QoL change was observed only in the urinary domain (P = .005), with a median increase from 8 to 17. Late urinary MID correlated with acute urinary MID (P = .003), acute QoL MID (P = .029), acute GU toxicity (P = .030), and lower baseline urinary score (P = .033). In MVA, only acute urinary MID predicted late urinary MID (OR, 9.7, P = .035). Our findings provide promising data on the feasibility and safety of 24 Gy whole-gland SDRT with urethra-sparing and organ motion control, in association with androgen deprivation therapy and an adequate prophylactic medication, in organ-confined unfavorable PCa. Long-term follow-up is needed to confirm these results.

Synthesis, Structural characterization and complex impedance analysis of a novel organic-inorganic hybrid compound based on Mercury (II) chloride

The organic-inorganic hybrid compounds are promising materials due to their electro-optical and semiconducting properties. In this study, a single crystal of (C6H16N)2[HgCl4] has been synthesized and characterized using single-crystal X-ray diffraction at room temperature, SEM/EDS and complex impedance spectroscopy. The crystal structure is centrosymmetric with the monoclinic system (P21/c space group). It consists of isolated tetrahedral anions [HgCl4]2− and protonated amines (C6H16N) +. SEM/EDS analyses proved the composition of the title compound. The frequency-dependent electrical and dielectric properties were analyses using complex impedance spectroscopy in the frequency range of 10−1 Hz – 1 MHz. The Nyquist plots (-Z’’ vs Z’) was characterized by the appearance of a single semicircle arc, indicating a non-Debye type relaxation process in the (C6H16N)2[HgCl4] material. The AC conductivity followed Jonscher law, and the variation of frequency exponent s with temperature suggested that non-overlapping small polaron tunneling (NSPT) is the dominant electrical transport mechanism. So, this work will be very beneficial to the further development of the (C6H16N)2[HgCl4] compound and its potential electrical applications.

Electrical and Ferroelectric Properties of Strontium Doped Lead-Free BCZT Ceramics

Herein, we synthesized Ba0.9-xCa0.1SrxTi0.8Zr0.2O3 (x = 0.05, 0.1, 0.15, 0.2) ceramic samples by employing a solid-state reaction technique. The variation of dielectric constant is studied concerning temperature in the range 1 kHz to 1 MHz frequency. Variation of dielectric constant ( εr ) with temperature reveals that charge carrier dispersion pushes the transition temperature towards higher frequency. Impedance analysis reveals that the maximum value of the imaginary part of impedance i.e., Z″ maxima, increases in all samples except for x = 0.05, which shows the opposite behaviour. This behaviour is due to the calcium (Ca2+) substitution at the titanium (Ti4+)-site at low doping concentration of Sr2+ ions. Nyquist plots show the presence of a single semi-circular arc, indicating the contribution of resistance and capacitance through grain boundary. PE hysteresis loops reveal that the values of saturation polarization ( Ps ) decrease with increasing Sr-doping, from 10.989 μC cm−2 to 6.586 μC cm−2, whereas the remnant polarization ( Pr ) shows variable values with increasing Sr-doping.

Enhancement of dielectric performance in tungsten bronze ceramics by substituting 25 % of Gd into Sr2SmTi2Nb3O15 ceramic

This study investigates the synthesis and systematic examination of tungsten bronze ceramics Sr2GdxSm1-xTi2Nb3O15 (SGSTN, x = 0, 0.25, 0.5, 0.75) using the solid-state reaction method. X-ray diffraction revealed tetragonal tungsten bronze structures with space group P4/mbm for x = 0.25, 0.5, and 0.75, and P4bm for x = 0. Scanning electron microscopy showed high densification and uniform grain dispersion, with grain sizes ranging from 6.2 to 10.8 μm depending on the Gd content. Impedance spectroscopy demonstrated that the dielectric properties were influenced by the addition of Gd3+, with a dielectric constant of 2549.97 at 400 °C and 1 kHz for x = 0.25. Impedance analysis suggested a negative temperature coefficient of resistance (NTCR), and Cole-Cole plots showed single semicircular arcs. Activation energy increased with decreasing (A1)-site ion size, indicating that oxygen vacancies were responsible for the relaxation phenomena. Complex modulus analysis confirmed the presence of non-Debye relaxations in the material.

Synthesis and characterization of magnetic nanoparticles decorated by carbon layers acting as defenders against bacterial infectious agents

High stability magnetic nanocomposites wrapped by carbon layers were efficiently synthesized using electrical arc powered by single arc unit. This is sufficient to ionize the nickel, and carbon electrodes immersed in distilled water through applying strong electric field between carbon rotatory cathode and nickel anode. Nickle decorated by carbon (Ni@C) nanocomposite was fully characterized by transmission electron microscope (TEM), X-ray Diffraction (XRD), Vibrating-sample magnetometer (VSM), UV/Visible Spectrophotometer (UV), Fourier-transform infrared spectroscopy (FTIR), Particle size analyzer (PZ), Zeta potential, and X-ray photoelectron spectroscopy (XPS). Ni particle was spherical with average size equals to 17 nm wrapped by carbon where its energy band gap values were 2.84 for C, and 3.36 eV for Ni. The estimated phase percentage of nickel was 64.8 % which is higher than the percentage of carbon layers that's donating the sample the observed high stability of zeta potential was found to be 26.4 mV. The saturation magnetization (Ms) and coercivity (Hc) examined were 10.624 emu/g and 80.648 G, respectively. The antibacterial effect of the synthesized nanocomposites was tested against standard ATCC (American Type Colony Collection) strains namely Pseudomonas aeruginosa 27853, Proteus mirabilis 35659, Proteus vurgalis 13315, Klebsiella pneumoniae 13883, and Staphylococcus epidermidis 12228. Proteus vurgalis 13315 was the most resistant strain which wasn't completely eradicated after 24 h incubation with the prepared nanoparticles. Further assessments through confocal microscope and reactive oxygen species (ROS) generation percentage were done to predict the possible antibacterial mechanism of the synthesized nanocomposite. Ultimately, the combined influence of nickel ions and carbon in the prepared Ni@C nanocomposite results in the suppression of bacterial respiration and the induction of oxidative stress, ultimately leading to bacterial cell death.

Dosimetric effects of small field size, dose grid size, and variable split-arc methods on gamma pass rates in radiation therapy.

This study investigates the influence of calculation accuracy in peripheral low-dose regions on the gamma pass rate (GPR), utilizing the Acuros XB (AXB) algorithm and ArcCHECK™ measurement. The effects of varying small field sizes, dose grid sizes, and split-arc techniques on GPR were analyzed. Various small field sizes were employed. Thirty-two single-arc plans with dose grid sizes of 2mm and 1mm and prescribed doses of 2, 5, 10, and 20Gy were calculated using the AXB algorithm. In total, 128 GPR plans were examined. These plans were categorized into three sub-fields (3SF), four sub-fields (4SF), and six sub-fields (6SF). The GPR results deteriorated with smaller target sizes and a 2mm dose grid size in a single arc. A similar degradation in GPR was observed with smaller target sizes and a 1mm dose grid size. However, the 1mm dose grid size generally resulted in better GPR compared with the 2mm dose grid size for the same target sizes. The GPR improved with finer split angles and a 2mm dose grid size in the split-arc method. However, no statistically significant improvement was observed with finer split angles and a 1mm dose grid size. This study demonstrates that coarser dose grid sizes result in lower GPRs in peripheral low-dose regions as calculated by AXB with ArcCHECK™ measurement. To enhance GPR, employing split-arc methods and finer dose grid sizes could be beneficial.

Improving the Efficiency of Single-Isocenter Multiple Metastases Stereotactic Radiosurgery Treatment

PurposeMultiple brain metastases can be treated efficiently with Stereotactic Radio Surgery (SRS) using a Single Isocenter Dynamic Conformal Arc (SIDCA) technique. Currently plans are manually optimized, which may lead to unnecessary table angles and arcs being used. This study aimed to evaluate an automatic 4π-optimization SIDCA algorithm for treatment efficiency and plan quality.Methods and MaterialsAutomatic 4π-optimized SIDCA plans were created and compared to the manually optimized clinical plans for 54 patients who received single-fraction SRS to 2-10 metastases. The number of table angles and arcs were compared with a paired t-test using a Bonferroni-corrected significance level of p<0.05/4=0.0125. The reduction in treatment time was estimated from the difference in the number of table angles and arcs. Plan quality was assessed through the volume-averaged inverse Paddick Conformity Index (CI) and Gradient Index (GI), and the volume of normal brain surrounding each metastasis receiving 12 Gy (local V12 Gy). For a five-patient subset the automatic plans were manually adjusted further. CI and GI were assessed for non-inferiority using a one-sided t-test with the non-inferiority limit equal to the 95% inter-observer reproducibility limit from a separate planning study (corrected significance level p<0.05/(4−1)=0.017).ResultsThe automatic plans significantly improved treatment efficiency with a mean reduction in the number of table angles and arcs of −0.5±0.1 and −1.3±0.2 respectively (± standard error, both p<0.001). Estimated treatment time saving was −2.7±0.5minutes, 14% of the total. The volume-averaged CI and GI were non-inferior to the clinical plans (both p<0.001), although there was a small systematic shift in CI of 0.07±0.01. The resulting difference in local V12 Gy, 0.25±0.04cm3, was not clinically significant. Minor manual adjustment of the automatic plans removed these slight differences whilst preserving the improved treatment efficiency.ConclusionsAutomatic 4π-optimization can generate SIDCA SRS plans with improved treatment efficiency and non-inferior plan quality.

Enhancing the Conductivity and Dielectric Characteristics of Bismuth Oxyiodide via Activated Carbon Doping.

Activated carbon/BiOI nanocomposites were successfully synthesized through a simplistic method. The produced composites were then characterized using XRD, TEM, SEM-EDX, and XPS. The results showed that BiOI with a tetragonal crystal structure had been formed. The interaction between activated carbon and BiOI was confirmed via all the mentioned tools. The obtained nanocomposites' electrical conductivity, dielectric properties, and Ac impedance were studied at 59 KHz-1.29 MHz. AC and dc conductivities were studied at temperatures between 303 and 573 K within the frequency range of 59 KHz-1.29 MHz. The 10% activated carbon/BiOI nanocomposite possessed dc and AC conductivity values of 5.56 × 10-4 and 2.86 × 10-4 Ω-1.cm-1, respectively, which were higher than BiOI and the other nanocomposites. Every sample exhibited increased electrical conductivity values as the temperature and frequency rose, suggesting that all samples had semiconducting behavior. The loss and dielectric constants (ε' and ε″) also dropped as the frequency increased, leading to higher dielectric loss. The Nyquist plot unraveled single semicircle arcs and a decreased bulk resistance, indicating decreased grain boundary resistance. Consequently, the electrical characteristics of BiOI, 1C/BiOI, 5C/BiOI, and 10C/BiOI implied their applicability as dielectric absorbers, charge-stored capacitors, and high-frequency microwave devices.

2384: Improvement of treatment delivery efficiency for prostate SBRT using single arc VMAT

2384: Improvement of treatment delivery efficiency for prostate SBRT using single arc VMAT

Temperature and frequency dependence of conductivity, density of states, and dielectric permittivity of ternary metal chalcogenide PbSnSe2 flake

The mechanically cleaved flake of ternary metal chalcogenide PbSnSe2 was transferred onto the interdigitated electrodes to form electrical contacts. The temperature dependent (180 K–250 K) electrical properties were then analyzed employing complex impedance spectroscopy from 2 kHz to 2 MHz. A detailed analysis of Nyquist plots proposed the space charge dependent behavior and negative temperature coefficient of PbSnSe2 flake. The AC conductivity followed Jonscher's power law with s-parameter value being less than unity. The values of s-parameter increased with rise in temperature suggesting the presence of non-overlapping small polaron tunneling (NSPT) in the PbSnSe2 flake. From this NSPT model, tunneling distance, hopping energy, and density of states (DOS) were estimated at temperatures from 180 K–250 K. The dielectric permittivity showed dispersion at lower frequencies and the tangent loss was also found to be directly related to temperature. A single semicircular arc in complex modulus analysis showed the dominance of bulk effect in the material.

The Impact of Multileaf Collimator Size on Single Isocenter Dynamic Conformal Arcs-Based Radiosurgery for Brain Metastases.

To compare the plan quality of stereotactic radiosurgery (SRS) between 2.5-mm and 5-mm multileaf collimator (MLC) and investigate the factors' influence onthe differences by MLC size. Seventy-six treatment plans including 145 targets calculated with a single isocenter multiple noncoplanar dynamic conformal arc (DCA) technique using automatic multiple brain metastases (MBM) treatment planning system. Conformity index (CI), gradient index (GI), lesion underdosage volume factor (LUF), healthy tissue overdose volume factor (HTOF), geometric conformity index (g), and mean dose to normal organs were compared between 2.5-mm and 5-mm MLC. Then the factors that influenced the differences of these parameters were investigated. The impact of target size was also investigated forCI and GI values of individual targets (n=145), and differences between 2.5-mm and 5-mm MLC were analyzed. All parameters except for LUF were significantly better in plans with 2.5 mm MLC. Target size was a significant factor for difference inHTOF, and distance between targets was a significant factorfor difference inbrain dose and GI. Among 145 metastases, the average inverse CI was 1.35 and 1.47 with 2.5-mm and 5-mm MLC, respectively (p<0.001). The average GI was 3.21 and 3.53, respectively (p<0.001). For individual targets, target size was a significant factor in CI and GI both with 2.5-mm and 5-mm MLC (p-value: <0.001, each). CI and GI were significantly better with 2.5-mm than 5-mm MLC. CI was almost >0.67 except for ≤5mm targets with 5-mm MLC. Also, GI was almost smaller than 3.0 for >10 mm targets both with 2.5-mm and 5-mm MLC. MBM with 5-mm MLC was almost fine. However, it may be better to use a conservative margin for larger metastases. It may also be better to avoid SRS with5-mm MLC for patients with ≤5 mm target size.

An Investigation about Microstructures, Mechanical Properties and Corrosion Behaviour of the TIG - MIG Hybrid Welded Dissimilar UNS 2205 and is 2062 Steels

The connecting of contrasting metals, namely double stainless steel to steel made of carbon, has taken place. performed using a hybrid welding system. A TIG and MIG welding joining based hybrid joining method was designed. The microstructures of the dissimilar metal joints were studied and the grains are coarser as contrast to the use of a single the welding process process by itself. With the addition of TIG welding to the process of MIG welding, the water-holding capacity of the metal in molten state pool is significantly improved. The nominal corrosion behaviour of the weldments was found better than the single arc welding system alone. The passivation behaviour of the joints was in the similar line to that of double stainless steel base metal. The pitting resistance of the joints in 1 M NaCl solution was inferior to the base metals.

Transient analysis of temperature field and fission gas about the arc plate fuel element

Obtaining the temperature field and fission gas release of fuel elements are crucial to the study on fuel behaviors and ensure the safety of elements. In order to enhance fuel efficiency, providing a design idea to make the fast reactor with high flux and multi-function, we have designed a core of the lead-based fast reactor with arc plate fuel elements. Based on above, a transient performance analysis program of arc plate fuel elements (TPAPAFE) was developed in this paper, for analyzing the thermal and fission gas module of arc plate fuel element by calculating transient variation in the maximum pellet temperature, internal and external coolant outlet temperature, and fission gas release share. The modular verification was done by comparing the results of TPAPAFE with others. Besides, the result of the arc plate fuel analyzed by TPAPAFE shows that the code is feasible and rational, and the single arc plate is so thin that coolant outlet temperatures on both sides of the plate are almost the same. Meanwhile, the error in temperature data between TPAPAFE and the steady-state program is only 5%. Furthermore, fission gas release fraction increased linearly with pellet temperature and bubble growth.

Epithermal Gold Discoveries in the Emerging Khundii Metallogenic Province, Southwest Mongolia

Abstract Mineral exploration since 2005 in a previously underexplored region of southwestern Mongolia resulted in the definition of the Zuun Mod porphyry Mo-Cu deposit, followed by discovery of the Altan Nar and Bayan Khundii epithermal gold deposits along with several prospects and advanced exploration projects. These discoveries form the core of the emerging Khundii (“Valley”) metallogenic province, ~50 × 100 km in size, located within a single island-arc terrane of Middle Carboniferous to early Permian age and predominantly within an individual mapped subterrane. The province is situated ~700 km west-northwest of the late Devonian Oyu Tolgoi porphyry Cu-Au deposit in a belt of mid-Paleozoic island arcs that are part of the Central Asian orogenic belt, host to world-class porphyry Cu-Au and epithermal gold deposits that stretch from southern Mongolia to the west, into China, Kazakhstan, and beyond. The Zuun Mod porphyry Mo-Cu deposit (297 ± 4.8 Ma) is hosted by a granodiorite intrusion cut by B-type quartz-molybdenite-chalcopyrite veins with K-feldspar alteration selvages plus disseminated biotite and magnetite. After definition of this deposit, a regional exploration program was initiated in 2009 over 110,000 km2, based on the underexplored nature of the region. Exploration included compilation of existing geologic, geochemical, and geophysical data and interpretation of satellite imagery followed by ground exploration that included stream, soil, and rock-chip sampling and geologic and alteration mapping. The Nomin Tal Cu-Au prospect was discovered in early 2011, and based on the indications from initial soil sampling, a 400- × 400-m soil survey was conducted over the southern part of the exploration license, which identified a Pb-, Zn-, and Au-in-soil anomaly over an area of ~1.5 × ~5.5 km. The first drill hole within the soil anomaly in late 2011 resulted in the discovery of the Altan Nar Au-polymetallic epithermal deposit with veins of coarsely crystalline quartz-adularia (309.7 ± 0.5 Ma) and Ca-, Mg-, Mn-, and Fe-carbonate gangue that host the base metal sulfides. The Bayan Khundii gold deposit was discovered in 2015 as the result of prospecting, ~16 km southeast of Altan Nar. Subsequent discovery of the Khar Mori gold project was announced in early 2021, ~3 km north of Bayan Khundii along a structural trend, and later in 2021 drilling discovered wide zones of disseminated gold at Ulaan Southeast, ~800 m west of Bayan Khundii. The epithermal quartz-adularia-gold veins (336.8 ± 0.5 Ma) at Bayan Khundii have colloform bands with minor pyrite and are enveloped by proximal illite alteration. The epithermal veins and alteration overprint an earlier, unrelated alteration style of residual quartz and pyrophyllite ± dickite ± diaspore-kaolinite. Similarly, residual quartz and pyrophyllite-dickite at Khar Mori are overprinted by epithermal mineralization, including arsenopyrite. At the central Ulaan project, ~3 km northwest of Bayan Khundii, intense quartz-white mica-pyrite alteration is widespread at surface, including tourmaline bodies and local copper anomalies, associated with nearby residual quartz and related aluminosilicate alteration. These alteration styles indicate erosion of a lithocap to its base, exposing K-feldspar and magnetite plus quartz-white mica-pyrite related to the top of a porphyry deposit, as yet only tested by a few scout drill holes. The undated porphyry-related alteration was subsequently overprinted by the gold-bearing epithermal veins after significant erosion.