Silica-water Interface Research Articles

Unconventional structural evolution of an oxide surface in water unveiled by in situ sum-frequency spectroscopy.

Oxide-water interfaces host a wide range of important reactions in nature and modern industrial applications; however, accurate knowledge about these interfaces is still lacking at the molecular level owing to difficulties in accessing buried oxide surfaces. Here we report an experimental scheme enabling in situ sum-frequency vibrational spectroscopy of oxide surfaces in liquid water. Application to the silica-water interface revealed the emergence of unexpected surface reaction pathways with water. With ab initio molecular dynamics and metadynamics simulations, we uncovered a surface reconstruction, triggered by deprotonation of surface hydroxylated groups, that led to unconventional five-coordinated silicon species. The results help demystify the multimodal chemistry of aqueous silica discovered decades ago, bringing in fresh information that modifies the current understanding. Our study will provide new opportunities for future in-depth physical and chemical characterizations of other oxide-water interfaces.

Structure, Properties, and Applications of Silica Nanoparticles: Recent Theoretical Modeling Advances, Challenges, and Future Directions.

Silica nanoparticles (SNPs), one of the most widely researched materials in modern science, are now commonly exploited in surface coatings, biomedicine, catalysis, and engineering of novel self-assembling materials. Theoretical approaches are invaluable to enhancing fundamental understanding of SNP properties and behavior. Tremendous research attention is dedicated to modeling silica structure, the silica-water interface, and functionalization of silica surfaces for tailored applications. In this review, the range of theoretical methodologies are discussed that have been employed to model bare silica and functionalized silica. The evolution of silica modeling approaches is detailed, including classical, quantum mechanical, and hybrid methods and highlight in particular the last decade of theoretical simulation advances. It is started with discussing investigations of bare silica systems, focusing on the fundamental interactions at the silica-water interface, following with a comprehensively review of the modeling studies that examine the interaction of silica with functional ligands, peptides, ions, surfactants, polymers, and carbonaceous species. The review is concluded with the perspective on existing challenges in the field and promising future directions that will further enhance the utility and importance of the theoretical approaches in guiding the rational design of SNPs for applications in engineering and biomedicine.

Variable-Angle Surface Spectroscopy Reveals the Water Structure in the Stern Layer at Charged Aqueous Interfaces.

At charged aqueous interfaces, the second-order nonlinear optical response originates from water molecules within the diffuse part of the electrical double layer, which are ordered by the surface field and from water that additionally experiences chemical and physical interactions with the surface in the Stern layer. These two environments can either reinforce or diminish the overall signal and can be disentangled by varying the coherence length of their interaction with external laser fields. Here, we demonstrate a method in which the angle of incidence is varied to afford a significant change in the coherence length. When this technique was applied to the silica-water interface, it was observed that water molecules in the Stern and diffuse layers direct their hydrogen atoms toward the mineral surface at a low ionic strength and neutral pH. A decrease in the signal with increasing ionic strength is attributed to hydrated cation adsorption that competes with free water for deprotonated silanol sites.

Molecular dynamics study on the effect of surface ionization on the interfacial heat transfer between silica and water

Understanding the thermal transport across the solid–liquid interface is crucial for the advancement of modern technology, with particular emphasis on the silica–water interface due to its universality and remarkable applications in energy conversion and medical treatment. Surface ionization is common for silica surfaces immersed in an aqueous environment, providing an adaptable way to modify silica surface properties. In this study, molecular dynamics simulation was employed to investigate the effect of surface ionization on the interfacial heat transfer between silica and water. It was demonstrated that increasing surface ionization significantly improves interfacial thermal conductance. Interactions between silica and water are strengthened so that more water molecules gather at the interface with higher ionization degree. In addition, increasing ionization results in more hydrogen bonds between ionized silica and water, producing more efficient interfacial heat paths. Somewhat counter-intuitively, although greater surface ionization does result in larger Coulombic forces, the primary contributor to enhanced interfacial thermal conductance is stronger repulsive van der Waals interactions, facilitated by decreased silica–water distances. Overall, this work successfully illustrated the mechanism of interfacial heat transfer enhancement due to surface ionization.

The effect of collisions on the chemomechanics of ice-covered silica slabs: a molecular dynamics study.

Using molecular dynamics simulation and the REAX potential, we study the collision of two planar silica surfaces covered by water ice. Without the ice cover, the two surfaces stick at all velocities investigated (160-1800 m s-1), due to the formation of chemical bonds between the colliding surfaces. A narrow ice cover - here of thickness 2 nm - prevents the sticking above a characteristic velocity, the bouncing velocity νb. During the collision, reactions occur at the silica-water interface; in particular, water molecules are dissociated and silanols are formed at the surface of the silica slabs. Passivation of the silica surface by H atoms is of little consequence to the magnitude of vb but reduces the number of surface reactions occurring.

Heterogeneous Rate Constant for Amorphous Silica Nanoparticle Adsorption on Phospholipid Monolayers.

The interaction of amorphous silica nanoparticles with phospholipid monolayers and bilayers has received a great deal of interest in recent years and is of importance for assessing potential cellular toxicity of such species, whether natural or synthesized for the purpose of nanomedical drug delivery and other applications. This present communication studies the rate of silica nanoparticle adsorption on to phospholipid monolayers in order to extract a heterogeneous rate constant from the data. This rate constant relates to the initial rate of growth of an adsorbed layer of nanoparticles as SiO2 on a unit area of the monolayer surface from unit concentration in dispersion. Experiments were carried out using the system of dioleoyl phosphatidylcholine (DOPC) monolayers deposited on Pt/Hg electrodes in a flow cell. Additional studies were carried out on the interaction of soluble silica with these layers. Results show that the rate constant is effectively constant with respect to silica nanoparticle size. This is interpreted as indicating that the interaction of hydrated SiO2 molecular species with phospholipid polar groups is the molecular initiating event (MIE) defined as the initial interaction of the silica particle surface with the phospholipid layer surface promoting the adsorption of silica nanoparticles on DOPC. The conclusion is consistent with the observed significant interaction of soluble SiO2 with the DOPC layer and the established properties of the silica–water interface.

Mechanism and Free-Energy Landscape of Peptide Bond Formation at the Silica–Water Interface

Mechanism and Free-Energy Landscape of Peptide Bond Formation at the Silica–Water Interface

Cooperative Adsorption of Nonionic Triton X-100 and Dodecyldimethylamine Oxide Surfactant Mixtures at the Hydrophilic Silica-Water Interface Studied by Total Internal Reflection Raman Spectroscopy and Multivariate Curve Resolution.

The adsorption of dimethyldodecylamine oxide (DDAO) and Triton X-100 (TX) as single components and mixed systems at the silica-water interface has been studied using total internal reflection (TIR) Raman spectroscopy combined with multivariate curve resolution (MCR). In this study, the mixtures of DDAO and TX indicate minimal synergism in the bulk solution; however, the cooperative adsorption behavior on the silica surface is shown with various mixtures of DDAO (up to 1.3 mM) and TX (up to 1.1 mM). Adding the DDAO (up to 0.3 mM) to TX solution, the surface excess of TX shows 30% enhancement, from 1.2 to 1.8 μmol m-2. Adding the DDAO also shifts the TX adsorption isotherms, resulting in the Gibbs free energy change of -2.87 ± 0.73 kJ mol-1. This free energy change is interpreted as the decrease in surface energy when the silica surface charged sites are screened by the DDAO adsorbed layer. Alternatively, when a DDAO solution contains a small amount of TX molecules, i.e., < 30 μM, its adsorption on the silica surface quickly equilibrates. In addition, the formation of a more ordered liquid-crystalline adsorbed layer, as in the case of single-component DDAO adsorption, is not observed.

Surface Activity of Ethoxylate Surfactants with Different Hydrophobic Architectures: The Effect of Layer Substructure on Surface Tension and Adsorption.

A series of nonionic ethoxylate surfactants containing different combinations of alkyl, phenyl, and adamantyl units in nine different arrangements, each combined with penta- and hexa-ethylene glycol groups, were synthesized and purified. The surface properties of all of the surfactants were investigated at the air-water (A-W) interface using surface tension (ST) to determine the limiting surface excess (Γlim), the limiting surface tension (σlim), and the critical micelle concentration (CMC). A smaller selection was investigated at the hydrophilic silica-water interface by neutron reflectometry to obtain the thickness of the adsorbed layer and the total adsorption at the CMC. An unusual and largely unrecognized feature of the ethoxylate group is that it is both hydrophilic and hydrophobic. It was found possible to account for the variation of σlim and Γlim of all of the adsorbed layers in terms of a balance of the estimated STs of the sublayers forming the overall adsorbed layer, including that of the underlying ethoxylate layer. The values of σlim were found to be highest for phenyl- and adamantyl-capped surfactants and lowest mainly when there was more than one methyl group at the surface. However, in terms of the concentration required to reach a given low ST, increasing the number of attached methyl groups was found to be less effective than using a smaller number of better-placed methyl groups. At the solid-liquid interface, adsorption at or above the CMC was in all cases in the form of a fragmented bilayer whose coverage varied approximately linearly with the packing parameter. However, results on the phenyl-capped surfactants showed that the high ST exhibited by these surfactants at the A-W interface becomes a high cohesion energy in the interior of the bilayer and they exhibited significantly higher adsorption than expected from simple packing arguments.

A New Imaginary Term in the Second-Order Nonlinear Susceptibility from Charged Interfaces.

Nonresonant second harmonic generation (SHG) phase and amplitude measurements obtained from the silica-water interface at varying pH values and an ionic strength of 0.5 M point to the existence of a nonlinear susceptibility term, which we call χX(3), that is associated with a 90° phase shift. Including this contribution in a model for the total effective second-order nonlinear susceptibility produces reasonable point estimates for interfacial potentials and second-order nonlinear susceptibilities when χX(3) ≈ 1.5χwater(3). A model without this term and containing only traditional χ(2) and χ(3) terms cannot recapitulate the experimental data. The new model also provides a demonstrated utility for distinguishing apparent differences in the second-order nonlinear susceptibility when the electrolyte is NaCl versus MgSO4, pointing to the possibility of using heterodyne-detected SHG to investigate ion specificity in interfacial processes.

Controlling Growth of Poly (Triethylene Glycol Acrylate-Co-Spiropyran Acrylate) Copolymer Liquid Films on a Hydrophilic Surface by Light and Temperature.

A quartz crystal microbalance with dissipation monitoring (QCM-D) was employed for in situ investigations of the effect of temperature and light on the conformational changes of a poly (triethylene glycol acrylate-co-spiropyran acrylate) (P (TEGA-co-SPA)) copolymer containing 12–14% of spiropyran at the silica–water interface. By monitoring shifts in resonance frequency and in acoustic dissipation as a function of temperature and illumination conditions, we investigated the evolution of viscoelastic properties of the P (TEGA-co-SPA)-rich wetting layer growing on the sensor, from which we deduced the characteristic coil-to-globule transition temperature, corresponding to the lower critical solution temperature (LCST) of the PTEGA part. We show that the coil-to-globule transition of the adsorbed copolymer being exposed to visible or UV light shifts to lower LCST as compared to the bulk solution: the transition temperature determined acoustically on the surface is 4 to 8 K lower than the cloud point temperature reported by UV/VIS spectroscopy in aqueous solution. We attribute our findings to non-equilibrium effects caused by confinement of the copolymer chains on the surface. Thermal stimuli and light can be used to manipulate the film formation process and the film’s conformational state, which affects its subsequent response behavior.

Unusual Maximum in the Adsorption of Aqueous Surfactant Mixtures: Neutron Reflectometry of Mixtures of Zwitterionic and Ionic Surfactants at the Silica-Aqueous Interface.

The adsorption of two zwitterionic surfactants, dodecyldimethylammonium propanesulfonate (C12PS) and dodecyldimethylammonium carboxybetaine (C12CB), and of their mixtures with the cationic dodecyltrimethylammonium bromide (C12TAB) and the anionic sodium dodecylsulfate (SDS) at the silica-water interface has been studied by neutron reflection (NR). The total adsorption, the composition of the adsorbed layer, and some structural information have been obtained over a range of concentrations from below the critical micelle concentration (CMC) to about 30× the mixed CMC. The adsorption behavior has been considered in relation to the previously measured micellar equilibrium of these mixtures in their bulk solutions and their adsorption at the air-water interface. C12CB adsorbs cooperatively close to its CMC to form an almost complete bilayer on its own, whereas C12PS adsorbs more weakly in a fragmented bilayer structure. Although SDS does not normally adsorb at the silica-water interface, SDS adsorbs strongly and cooperatively with C12PS at fractional SDS compositions up to about 0.5. This cooperativity is lost when the adsorbed fraction of SDS rises above about 0.5. At this point, adsorption drops sharply, creating an unusual maximum in the variation of adsorption with a total concentration above the mixed CMC. Neither the increase in cooperativity nor the subsequent decline in adsorption results directly from variations of the independently determined monomer concentrations in the bulk solution. The adsorption maximum is predominantly the effect of strong cooperative interaction, possibly accompanied by partial segregation of SDS within the layer, followed by charge repulsion from the surface. Although the solution aggregation and adsorption at the A-W interface are similar for SDS with C12CB, the addition of SDS to C12CB at the silica-water interface promotes the opposite behavior to that of SDS with C12PS, and SDS simply disrupts the cooperative binding of C12CB. Unlike SDS, the cationic surfactant C12TAB adsorbs on silica. It therefore coadsorbs at the SiO2-W interface with either C12CB or C12PS. However, in neither case is there any pronounced cooperativity and, even though the presence of C12TAB might be expected to favor adsorption, the adsorption is generally unexpectedly low.

In situ quantitative study of the phase transition in surfactant adsorption layers at the silica-water interface using total internal reflection Raman spectroscopy.

Dimethyldodecylamine N-oxide (DDAO), a unique type of surfactant, shows high surface activity with two distinct energy states at the buried hydrophilic silica/aqueous solution interface studied by total internal reflection (TIR) Raman spectroscopy combined with ratiometric and kinetic analysis. Different from other types of surfactant, i.e., ionic and nonionic, the adsorption of DDAO demonstrates a specific critical surface aggregation concentration (csac) at 0.15 mM gives a complete surface coverage of 6.6 ± 0.3 μmol m-2, much lower than the bulk critical micellization concentration (cmc) at the same conditions (csac ≈ 0.072 cmc). A phase transition of adsorbed layers from liquid crystalline as the intermediate state to the disordered liquid phase is spectroscopically and energetically analyzed. The adsorption of DDAO on silica surfaces is described quantitatively in a potential energy curve.

Molecular dynamics simulations of amino acid adsorption and transport at the acetonitrile-water-silica interface: the role of side chains.

The solvation and transport of amino acid residues at liquid–solid interfaces have great importance for understanding the mechanism of separation of biomolecules in liquid chromatography. This study uses umbrella sampling molecular dynamics simulations to study the adsorption and transport of three amino acid molecules with different side chains (phenylalanine (Phe), leucine (Leu) and glutamine (Gln)) at the silica–water–acetonitrile interface in liquid chromatography. Free energy analysis shows that the Gln molecule has stronger binding affinity than the other two molecules, indicating the side chain polarity may play a primary role in adsorption at the liquid–solid interface. The Phe molecule with a phenyl side chain exhibits stronger adsorption free energy than Leu with a non-polar side chain, which can be ascribed to the better solvated configuration of Phe. Further analysis of molecular orientations found that the amino acid molecules with apolar side chains (Phe and Leu) have ‘standing up’ configurations at their stable adsorption state, where the polar functional groups are close to the interface and the side chain is far from the interface, whereas the amino acid molecule with a polar side chain (Gln) chooses the ‘lying’ configuration, and undergoes a sharp orientation transition when the molecule moves away from the silica surface. Extending our simulation studies to systems with different solute concentrations reveals that there is a decrease in the adsorption free energy as well as surface diffusion as the solute concentration increases, which is related to the crowding in the interfacial layers. This simulation study gives a detailed microscopic description of amino acid molecule solvation and transport at the acetonitrile–water–silica interface in liquid chromatography and will be helpful for understanding the retention mechanism for amino acid separation.

Directly probing surfactant adsorption on nanoscopic trenches and pillars

HypothesisConfinement causes a change in the amount of surfactant adsorbed and in the adsorption morphology. ExperimentsTwo cationic surfactants, tetradecyltrimethylammonium bromide (TTAB) and cetylpyridinium chloride (CPC) were adsorbed at the silica-water interface. Atomic force microscopy (AFM) force curves were measured on 50 nm and 80 nm wide trenches. Force curves were also measured on silica pillars, and the results were quantified based on distance from the edge. FindingsTrenches: Adsorbed surfactants films in 50 nm and 80 nm trenches showed the same break-through values. However, compared to unconfined values, TTAB in trenches had decreased break-through and adhesion forces while CPC in trenches had increased break-through and adhesion forces, indicating that surfactant identity varies the confinement effect.Pillars: Near the edge, few surfactants adsorb, and those that do extend in the direction normal to the surface. While the experimental data agree qualitatively with previous coarse-grained molecular dynamic simulations, the length scales at which the phenomena are detected differ by ~ half-order of magnitude. Specifically, experimental data show measurable effects on adsorbed surfactant morphology at a distance from the edge 10–20 times the length of a surfactant molecule after accounting for the ~8 nm size of the probe.

The joint effect of surface polarity and concentration on the structure and dynamics of acetonitrile solution: a molecular dynamics simulation study.

The interfacial properties of the acetonitrile (ACN)-water-silica interface have great implications in both liquid chromatography and heterogeneous catalysis. We have performed molecular dynamics (MD) simulations of ACN and water binary solutions to give a comprehensive study of the collective effect of silica surface polarity and ACN concentration on interfacial structures and dynamics by tuning both surface charges and ACN concentration. MD simulation results indicate that many properties in the liquid-solid interface region undergo a monotonic change as the silica surface is tuned from polar to apolar due to the weakening of hydrogen bonding, while their dependence on ACN concentration is presumably governed by the preferential adsorption of water at the silica surface over ACN. However, at apolar surfaces, the interfacial structures of both water and ACN behave like the liquid-vapor interface, and this resemblance leads to an enrichment of ACN at the interface as well as accelerated dynamics, which is very different from that in the bulk solution. The organization of ACN molecules at both polar and apolar surfaces can be attributed to the amphiphilic nature of ACN, by which the micro-heterogeneity domain formed can persist both in the bulk and at the liquid-solid interface. Moreover, extending diffusion analysis to the second layer of the interface shows that the interfacial transport pathways at polar surfaces are likely very different from that of apolar surfaces. These simulation results give a full spectrum description of the ACN/water liquid-solid interface at the microscopic level and will be helpful for explaining related spectroscopic experiments and understanding the microscopic mechanisms of separation protocols in current chromatography applications.

Structuring of colloidal silica nanoparticle suspensions near water-silica interfaces probed by specular neutron reflectivity.

Structuring of aqueous suspensions of colloidal silica nanoparticles near an isolated planar silica-water interface is studied by specular neutron reflectivity. The reflectivity data clearly show that the suspensions develop a damped, oscillatory concentration profile in the normal direction to the interface. The wavelengths of these oscillations agree well with those independently determined by direct force measurements in the slit-geometry. The reflectivity data further demonstrate that the oscillatory structure persists over several layers and that the first particle layer is separated from the interface by a particle-free region.

Parametrizing nonbonded interactions between silica and water from first principles

Silica has been used in a vast number of micro/nano-fluidic technologies where interactions of water with silica at the molecular level play a key role. In such small systems, an understanding of mass and heat transport or surface wetting relies on accurate calculations of the water-silica interface coupling through atomic interactions. Molecular dynamics (MD) is a convenient tool for such use, but force field parameters for nonbonded interactions are required as an input, which are very limited in literature. These interaction parameters can be predicted by density functional theory, but dispersion forces are not calculated in standard models for electron correlations that additional correction models have been proposed at different levels of sophistications, and still under development. Accordingly, this work employs state of the art quantum chemistry to compute the binding energies. Force field parameters for silica/water van der Waals interactions were calculated, and later tested in MD simulations of water droplet on silica surface. While the standard dispersion corrections overestimated the binding energy, Becke-Johnson model yielded interactions parameters recovering experimentally measured wetting behavior of silica with a water contact angle of approximately 12.4° on the flat and clean silica surface. Results will be useful for the current molecular modelling attempts by providing transferable parameters for simple silica/water van der Waals interactions as an alternative to existing complex surface interaction models.

Disentangling bulk polymers from adsorbed polymers using the quartz crystal microbalance

At sufficient adhesion energy, polymers may adsorb irreversibly at an interface, with many adhesion sites per polymer and significant changes in their conformation. In addition to irreversibly adsorbed polymers there may be reversibly adsorbed polymers, which are in dynamic equilibrium with bulk polymers, and which have fewer adhesion sites per polymer and less significant conformational changes. In this work, we simultaneously determine the viscoelasticity of irreversibly adsorbed polymers, reversibly adsorbed polymers, and bulk polymers. To this end, we combine hydrodynamic modelling with quartz crystal microbalance-dissipation (QCM-D) measurements involving an adsorbing target surface and a non-adsorbing, i.e., passivated surface. We apply the method to polyethylene glycol adsorption at the water–silica interface. The results demonstrate that the viscoelasticity of the reversibly adsorbed polymers is similar to that of the bulk polymers, whereas the irreversibly adsorbed polymers are less elastic. This is the first approach to decouple these viscoelastic contributions, which provides a new analytical tool to quantify the kinetics and conformation of reversibly adsorbed polymers, shedding light on polymer dynamics near interfaces.

Enhancing silica surface deprotonation by using magnetic nanoparticles as heating agents

In this work, we investigate the possibility of using magnetic nanoparticles embedded into the silica to locally heat up the silica-water interface where the increase in temperature of nanoparticles is induced by an external radio-frequency magnetic field. Through the use of the theoretical model, it is shown that such the process leads to an increase in the total negative charge of the silica surface due to the deprotonation of silanol groups. It is also shown that the efficiency of such an electric charging process depends on the size of nanoparticles. Moreover, the optimal size of nanoparticles allowing for a maximum charging efficiency is determined. This observation may prove to be very important from the point of view of potential applications as it may allow to fine-tune chemical reactions on the silica surface. Some aspects of this work related to the magnetically heated nanoparticles were verified by the experiment.