End Of Side Chain Research Articles

Carbosiloxane Bottlebrush Networks for Enhanced Performance and Recyclability.

Silicone bottlebrush copolymers and networks derived from cyclic carbosiloxanes are reported and shown to have enhanced properties and recyclability compared with traditional dimethylsiloxane-based materials. The preparation of these materials is enabled by the synthesis of well-defined heterotelechelic macromonomers with Si-H and norbornene chain ends via anionic ring-opening polymerization of the hybrid carbosiloxane monomer 2,2,5,5-tetramethyl-2,5-disila-1-oxacyclopentane. These novel heterotelechelic α-Si-H/ω-norbornene macromonomers undergo efficient ring-opening metathesis copolymerization to yield functional bottlebrush polymers with accurate control over molecular weight and functional-group density. Si-H groups retained at the ends of side-chains after ring-opening metathesis copolymerization allow for the preparation of supersoft networks via hydrosilylation with cross-linkers such as tetrakis[dimethyl(vinyl)silyl]orthosilicate. In contrast to traditional PDMS systems, the incorporation of poly(carbosiloxane) side chains allows the resulting networks to be recycled back to the original monomer (>85% recovery) via depolymerization at elevated temperatures (250 °C) in the presence of base catalysts (potassium hydroxide and tetramethylammonium hydroxide). The recovered monomer was successfully repolymerized through anionic ring-opening polymerization with no decrease in structural fidelity or activity. In summary, this combination of unique (macro)monomer design and bottlebrush architecture creates new opportunities in sustainable practices by offering a robust, recyclable alternative to commercial silicone-based materials.

Controlling Crystal Orientation in Films of Conjugated Polymers by Tuning the Surface Energy.

It has been a long-term goal to understand the molecular orientation in films of conjugated polymers, which is crucial to their efficient exploitation. Here, we show that the surface energies determine the crystal orientation in films of model conjugated polymers, substituted polythiophenes crystallized on substrates. We systematically increase the surface energy of edge-on crystals formed at the vacuum interface by attaching polar groups to the ends of the polymer side chains. This suppresses crystallization at the vacuum interface, resulting in a uniform face-on crystal orientation induced by the graphene substrate in polythiophene films as thick as 200 nm, which is relevant for devices. Surprisingly, face-on crystal orientation is attained in the modified polythiophenes crystallized even on amorphous surfaces. Furthermore, for the samples with still competing interfacial interactions, the crystal orientation can be switched in the same sample, depending on the crystallization conditions. Thus, we report a fundamental understanding and control of the equilibrium crystal orientation in films of conjugated polymers.

Exceptional stability of the sugammadex-solasodine complex: Insights from experimental and theoretical studies

Sugammadex (SGM) is the first cyclodextrin (CD)-based selective relaxant binding agent. We investigated its ability to capture natural aminosteroid phytotoxins, and assessed its potential as an antidote for intoxication. Solasodine (SS), a toxic alkaloid from the Solanaceae family, was chosen as the model compound. Complexation was studied using nuclear magnetic resonance (NMR) spectroscopy, molecular modelling, and isothermal titration calorimetry (ITC). NMR in various D2O/DMSO‑d6 media revealed a particularly stable inclusion-type complex, identifying a slow exchange process between the CD and the aminosteroid along with a less significant fast exchange between DMSO and SGM. Using various NMR techniques, the structure and kinetic/thermodynamic parameters of the inclusion complex were explored. Theoretical calculations showed the secondary amino head of SS near the carboxylate ends of the SGM sidechains, facilitating intermolecular ionic interactions. ITC experiments in an aqueous environment provided Ka stability constants of 7.03 × 106 M−1 and 4.17 × 106 M−1 at 25 °C and 37 °C, respectively, similar to previously reported SGM complexes with aminosteroid neuromuscular blockers. Finally, SGM significantly increased cell survival and reduced SS toxicity in mHippoE-14 mouse hippocampal embryonic cells, supporting the hypothesis that SGM could act as an antidote to SS's toxic effects.

Selective electrochemical degradation of bottlebrush elastomers

AbstractWe introduce a simple synthetic strategy to selectively degrade bottlebrush networks derived from well‐defined poly(4‐methylcaprolactone) (P4MCL) bottlebrush polymers. Functionalization of the hydroxyl groups present at the terminal ends of P4MCL side chains with α‐lipoic acid resulted in bottlebrush polymers having a range of molecular weights (Mn = 45–2200 kg mol−1) and a tunable number of reactive dithiolane chain ends. These functionalized chain ends act as efficient crosslinkers due to radical ring‐opening of the dithiolane rings under UV light. The resulting redox‐active disulfide crosslinks enable mild electrochemical or chemical degradation of the SS crosslinks to regenerate the starting bottlebrush polymer. P4MCL side chains and the disulfides can be degraded simultaneously using harsher reducing conditions. This combination of bottlebrush architecture with facile disulfide crosslinking presents a versatile platform for preparing highly tunable elastomers that undergo controlled degradation under mild conditions.

Effect of catalysts on the mechanical, thermal, and adhesive properties of polyrotaxane-modified epoxy resin

Polyrotaxane (PR) is a supramolecular polymer, in which an axial polymer extends through multiple cyclic molecules. PR specifically comprises polyethylene glycol, α-cyclodextrin, and adamantane as the axial polymer, cyclic molecule, and terminal blocking group, respectively. It is a useful stress-relaxing material because the cyclic polymers can freely slide and rotate in cyclic motions on the axial polymer. In this study, epoxy resin (DGEBA) cured with phenolic resin (PN) was blended with PR, which has methacryl groups at the ends of side chains of the cyclic molecules, as a toughness modifier. The effect of the methacryl group polymerization catalyst (DCP) on the cured properties of epoxy resin was reported. PR was homogeneously dispersed in the DGEBA/PN resin matrix. Increasing the PR concentration significantly improved the toughness, impact resistance, and adhesive properties of the DGEBA/PN/PR alloy. Moreover, adding DCP resulted in an increase in the glass transition temperature due to the decreased molecular mobility of the network. This phenomenon was attributed to the synergistic effect of the formation of an interpenetrating polymer network, which is an entangled network of the curing reaction of the DGEBA/PN resin and polymerization of PR, and the intermolecular hydrogen bonds between carbonyl and hydroxyl groups of PR and hydroxyl groups of the DGEBA/PN resin. In contrast, the increased interfacial adhesion between PR and the DGEBA/PN did not result in significant improvement of flexural properties.

Identification of a novel xanthan-binding module of a multi-modular Cohnella sp. xanthanase.

A new strain of xanthan-degrading bacteria identified as Cohnella sp. has been isolated from a xanthan thickener for food production. The strain was able to utilize xanthan as the only carbon source and to reduce the viscosity of xanthan-containing medium during cultivation. Comparative analysis of the secretomes of Cohnella sp. after growth on different media led to the identification of a xanthanase designated as CspXan9, which was isolated after recombinant production in Escherichia coli. CspXan9 could efficiently degrade the β-1,4-glucan backbone of xanthan after previous removal of pyruvylated mannose residues from the ends of the native xanthan side chains by xanthan lyase treatment (XLT-xanthan). Compared with xanthanase from Paenibacillus nanensis, xanthanase CspXan9 had a different module composition at the N- and C-terminal ends. The main putative oligosaccharides released from XLT-xanthan by CspXan9 cleavage were tetrasaccharides and octasaccharides. To explore the functions of the N- and C-terminal regions of the enzyme, truncated variants lacking some of the non-catalytic modules (CspXan9-C, CspXan9-N, CspXan9-C-N) were produced. Enzyme assays with the purified deletion derivatives, which all contained the catalytic glycoside hydrolase family 9 (GH9) module, demonstrated substantially reduced specific activity on XLT-xanthan of CspXan9-C-N compared with full-length CspXan9. The C-terminal module of CspXan9 was found to represent a novel carbohydrate-binding module of family CBM66 with binding affinity for XLT-xanthan, as was shown by native affinity polyacrylamide gel electrophoresis in the presence of various polysaccharides. The only previously known binding function of a CBM66 member is exo-type binding to the non-reducing fructose ends of the β-fructan polysaccharides inulin and levan.

Fluoride adsorption studies on different amyloid fibrils hybrids: Spectroscopic analysis and molecular docking analysis

Extended exposure to excessive fluoride-contaminated water causes irreversible damage to the ecosystem and the local inhabitants. In this study, three amyloid fibril hybrids, which were soy protein isolate amyloid fibril coated ZrO2 (ZrSAF), lysozyme amyloid fibril coated ZrO2 (ZrLAF), and bovine serum albumin amyloid fibril coated ZrO2 (ZrBAF), were prepared and the adsorption capacity and behavior were evaluated. ZrSAF, ZrLAF, and ZrBAF exhibited considerable fluoride removal capacity, with maximum adsorption capacities of 102.04, 78.12, and 90.09 mg/g, respectively. These hybrids demonstrated effective fluoride removal in a wide pH range of 3 to 10. In real wastewater experiments, amyloid fibrils hybrids still had about 89 % fluoride ions removal efficiency after five adsorption cycles. The secondary conformation of the proteins changed during material synthesis and fluoride adsorption, and a large amount of β-sheet enhanced adsorbent stability. The synergistic effects of amyloid fibril and ZrO2 were analyzed by spectroscopic analysis and molecular docking. The electrostatic interaction of the positively charged N atom at the end of the Lys amino acid side chain, the hydrogen bonding of amino acid residues at specific binding sites, and complexation played a key role in defluoridation process. This work revealed the great potential of protein-based nanomaterials as effective fluoride removal adsorbents.

Compound 5 alleviated acute kidney injury without affecting the antitumor effect after cisplatin treatment

Despite being a powerful weapon against cancer cells, cisplatin's therapeutic potential is hampered by numerous adverse reactions, including acute kidney injury (AKI). Compound 5 has 3-SH fragments at the end of the vertical short alkyl side chain, which is an ROS scavenger synthesized. In this study, we evaluated the protective effect of compound 5 on the kidney after cisplatin administration and its mechanism. The results founded that compound 5 can alleviate serum urea nitrogen and serum creatinine induced by cisplatin administration in vivo. In addition, histopathological analysis of the kidneys showed that compound 5 significantly reduced cisplatin-induced (Cis-induced) renal toxicity compared with the cisplatin group. A mechanism study showed that compound 5 significantly reduces NOX4 levels, improves the activity of antioxidant enzymes (SOD and GSH-Px), reduces Malondialdehyde (MDA) levels, increases the total antioxidant level, reduces oxidative stress, and thus reduces kidney tissue damage. At the same time, compound 5 activated the Nrf2 signaling pathway. In addition, it can increase the expression of Bax, reduce the expression of Bcl-2 and caspase-3, a marker of apoptosis, which is beneficial to the survival of kidney cells. Additionally, compound 5 did not interfere with the antitumor effects of cisplatin in in vivo xenotransplantation models.

Coarse-grained modeling of polymers with end-on and side-on liquid crystal moieties: Effect of architecture.

Mesogens, which are typically stiff rodlike or disklike molecules, are able to self-organize into liquid crystal (LC) phases in a certain temperature range. Such mesogens, or LC groups, can be attached to polymer chains in various configurations including within the backbone (main-chain LC polymers) or at the ends of side-chains attached to the backbone in an end-on or side-on configuration (side-chain LC polymers or SCLCPs), which can display synergistic properties arising from both their LC and polymeric character. At lower temperatures, chain conformations may be significantly altered due to the mesoscale LC ordering; thus, when heated from the LC ordered state through the LC to isotropic phase transition, the chains return from a more stretched to a more random coil conformation. This can cause macroscopic shape changes, which depend significantly on the type of LC attachment and other architectural properties of the polymer. Here, to study the structure-property relationships for SCLCPs with a range of different architectures, we develop a coarse-grained model that includes torsional potentials along with LC interactions of a Gay-Berne form. We create systems of different side-chain lengths, chain stiffnesses, and LC attachment types and track their structural properties as a function of temperature. Our modeled systems indeed form a variety of well-organized mesophase structures at low temperatures, and we predict higher LC-to-isotropic transition temperatures for the end-on side-chain systems than for analogous side-on side-chain systems. Understanding these phase transitions and their dependence on polymer architecture can be useful in designing materials with reversible and controllable deformations.

Ion Conductivity of Liquid Crystalline Poly(substituted methylene)s Bearing Ionic Liquid Moieties at the Side Chain Ends

We have measured the ionic conductivity (σ) of liquid crystalline poly(substituted methylene)s (PMs) bearing ionic liquid (IL) moieties attached to the main chain via alkyl spacers. Four types of PMs investigated, differing in main-chain stereoregularity (atactic or syndiotactic) and the number of methylene units in the alkyl spacer (n = 6 or 12), have twice the σ of conventional polyacrylate ILs with similar glass transition temperatures. The highest σ of 5.9 × 10−5 S cm−1 is measured for the atactic PM with n = 12 at 30 °C. Poly(ionic liquid)s (PILs) based on lquid crystalline poly(substituted methylene)s (PMs) has twice high ionic conductivity (σ) than conventional PILs similar in the glass transition temperature. The highest σ value measured for these polymers with molecular weights more than 105 kDa is 5.9 × 10−5 S cm−1, greater than the maximum value of 3.0 × 10−5 S cm−1 expected for PILs.

Epoxy resins containing epoxy-modified polyrotaxanes

The toughening of epoxy resins is important for their applications in coatings, adhesives, and composite materials. In our previous study, we introduced polyrotaxane (PR), which comprises poly-ε-caprolactone (PCL)-grafted α-cyclodextrins (α-CDs) and a polyethylene glycol (PEG) axial chain, into epoxy resins as an additive and observed that the presence of PR causes an additional viscoelastic relaxation and enhances the mechanical toughness. In this study, we modified the side chain ends of PR with epoxy groups (PR-E) to enable incorporation into crosslinked epoxy networks. The chemical bonding of PR-E to the epoxy resins suppressed the local dynamics of the PCL graft chains and enhanced the mechanical properties.

Abstract 3098: Structure-based design rules for potent quadruplex-binding compounds based on the naphthalene diimide core

Abstract Quadruplex nucleic acids (G4s) are four-stranded arrangements formed by guanine-rich tracts of DNA or RNA, held together by Hoogsteen hydrogen-bonded guanine quartets. G4 sequences are widely though not randomly distributed in the human genome. They are over-represented in telomeres and in the regulatory regions of many cancer-related genes such as KIT, MYC, VEGF, RAS and HIF. G4 structures can be unwound by helicase activity but can be stabilized by the binding of high-affinity small molecules. The compound QN-302, a tetra-substituted naphthalene diimide (ND) derivative, has nanomolar affinity and selectivity for several DNA and RNA G4s over duplex DNA. QN-302 has single-digit nM anti-proliferative activity in a panel of human pancreatic cancer (PDAC) cell lines (Ahmed et al., ACS Med Chem Lett, 2020, 11, 1634-1644). It has significant anti-tumor activity in several models for PDAC - in a MIA-PACA2 xenograft, in the genetic KPC model and in an orthotopic BX-PC3 model. QN-302 is currently in an advanced stage of pre-IND development by Qualigen Inc as a novel anti-cancer agent. QN-302 is the latest in several generations of NDs developed by us and designed by computer modelling based on earlier G4 co-crystal structures determined in this laboratory. The database of seven ND-containing crystal structures includes four different NDs with distinct side chain end groups, all with intramolecular telomeric parallel G4s. End-groups include N-methyl piperazine, hydroxyl, morpholino and N-dimethyl. These structures have been systematically compared for example using least-squares overlays of the structures. All the structures have their four substituents positioned each in a G4 groove, although there are significant differences in orientations of the end groups. Surprisingly, the naphthalene diimide cores do not retain the same orientation in each structure, with three distinct orientations being apparent. Examination of ND core overlap with the adjacent G-quartet has revealed variation in the degree of heterocycle-guanine base overlap, which is dependent on the nature and size of each substituent. However, all structures show minimal ND-guanine overlap, with typically just one out of four guanines in a G-quartet being involved. This strongly implies that most of the contribution to ND-G4 affinity comes from the side chains, and especially from the protonated end groups. These and other observations have led us to develop a structure-activity framework for tetra-substituted NDs, which has culminated in their optimization and the design of QN-302, with enhanced cellular potency and G4 affinity compared to previous NDs. Citation Format: Stephen Neidle. Structure-based design rules for potent quadruplex-binding compounds based on the naphthalene diimide core [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2023; Part 1 (Regular and Invited Abstracts); 2023 Apr 14-19; Orlando, FL. Philadelphia (PA): AACR; Cancer Res 2023;83(7_Suppl):Abstract nr 3098.

Self-Healable, Stretchable, and Super-Soft Bottlebrush Polyester Elastomers for Highly Sensitive Flexible Sensors

While much effort has been devoted to the creation of super-soft elastomers, there is a dearth of research aimed at self-healable and super-soft renewable elastomers. Herein, self-healing and super-soft renewable elastomers are developed based on bottlebrush architecture design and dynamic associative transesterification. The bottlebrush polymer precursors are generated by ring-opening metathesis polymerization (ROMP) of the norbornene-terminated macromonomer poly(ε-caprolactone-co-l-lactide) (PCLLA) (NB-PCLLA). After introducing alkyne groups onto the end of PCLLA side chains, the bottlebrush polymers are cross-linked to achieve elastomer networks via a UV-induced “click” thiol-yne reaction between the terminal alkyne groups and the dithiothreitol (DTT) additive. The resulting materials exhibit a shear modulus as low as 17 kPa, high stretchability with breaking strains as large as 315%, and a self-healing efficiency of 95.6% at an elevated temperature of 80 °C. Taking the super-softness advantage, flexible sensor devices are assembled based on the prepared elastomer, which are highly sensitive to deformation with a gauge factor of 0.347. This work demonstrates that high-performance biodegradable materials with unique properties that conventional linear polymers impossibly possess can be easily constructed by molecular architecture design using bottlebrush polymers as building blocks.

Embedding Peptides into Synthetic Polymers: Radical Ring-Opening Copolymerization of Cyclic Peptides.

Biopolymers such as proteins and nucleic acids are the key building blocks of life. Synthetic polymers have nevertheless revolutionized our everyday life through their robust synthetic accessibility. Combining the unmatched functionality of biopolymers with the robustness of tailorable synthetic polymers holds the promise to create materials that can be designed ad hoc for a wide array of applications. Radical polymerization is the most widely applied polymerization technique in both fundamental science and industrial polymer production. While this polymerization technique is robust and well controlled, it generally yields unfunctional all-carbon backbones. Combinations of natural polymers such as peptides, with synthetic polymers, are thus limited to tethering peptides onto the side chains or chain ends of the latter. This synthetic limitation is a critical restraint, considering that the function of biopolymers is programmed into the sequence of their main chain (i.e., primary structure). Here, we report the radical copolymerization of peptides and synthetic comonomers yielding synthetic polymers with defined peptide sequences embedded into their main chain. Key was the development of a solid-phase peptide synthesis (SPPS) approach to generate synthetic access to peptide conjugates containing allylic sulfides. Following cyclization, the obtained peptide monomers can be readily copolymerized with N,N-dimethylacrylamide (DMA)─controlled by reversible addition-fragmentation chain transfer (RAFT). Importantly, the developed synthetic strategy is compatible with all 20 standard amino acids and uses exclusively standard SPPS chemicals or chemicals accessible in one-step synthesis─prerequisite for widespread and universal application.

Mitochondria-Targeted Nanosystem with Reactive Oxygen Species-Controlled Release of CO to Enhance Photodynamic Therapy of PCN-224 by Sensitizing Ferroptosis.

The apoptosis-resistant mechanism of photodynamic therapy (PDT) usually results in limited therapeutic efficacy. The development of new strategies for sensitizing targeted ferroptosis that bypass apoptosis resistance is of great significance to improve the antitumor efficacy of PDT. In this study, a novel amphiphilic copolymer whose main chain contains reactive oxygen species (ROS)-responsive groups and the end of side chains contains triphenylphosphine is synthesized, to encapsulate porphyrinic metal-organic framework PCN-224 via self-assembly which are hydrothermally synthesized by coordination of zirconium (IV) with tetra-kis(4-caboxyphenyl) porphyrin, and loaded carbon monoxide releasing molecule 401 (CORM-401) by their hollow structures (PCN-CORM), and finally, surface-coated with hyaluronic acid. The nanosystem can sequentially localize to mitochondria which is an important target to induce apoptosis and ferroptosis in cancer cells. Upon excitation with near-infrared light, PCN-224 is activated to produce amounts of ROS, and simultaneously triggers the rapid intracellular release of CO. More importantly, the released CO can sensitize ferroptosis and promote apoptosis to significantly enhance the antitumor efficacy of PCN-224 both in vitro and in vivo. These results illustrate that the mitochondria-targeted drug delivery system combined PDT with CO leads to an effective antitumor efficacy, which maybe a promising way to enhance the treatment efficiency of PDT.

Side Chain Dynamics of Poly(norbornene)-g-Poly(propylene oxide) Bottlebrush Polymers.

The segmental dynamics of the side chains of poly(norbornene)-g-poly(propylene oxide) (PNB-g-PPO) bottlebrush polymer in comparison to PPO is studied by quasi-elastic neutron scattering. Having experimental time and length scale information simultaneously allows to extract spatial information in addition to relaxation time. Tethering one end of the PPO side chain onto a stiff PNB backbone slows down the segmental relaxation, over the length and time scales investigated. The power law dependence of the relaxation time on the momentum transfer, Q, indicates a more heterogeneous relaxation pattern for the bottlebrush polymer, whereas the linear PPO has less deviations from a homogenous relaxation. Similar conclusions can be drawn from the time dependent mean square displacement, 〈r2 (t)〉, and the non-Gaussian parameter, α2 (t). Herein, the bottlebrush polymer shows a more restricted dynamics, whereas the linear PPO reaches 〈r2 (t)〉∝t0.5 at the highest temperature. The deviations from Gaussian behavior are evident at the α2 (t). Both samples show a decaying α2 (t). The non-Gaussian parameter supports the results from the power law dependence of the relaxation times, with lower α2 (t) values for PPO compared to those for PNB-g-PPO, pointing to less deviations from Gaussian behavior.

Hydrogen-Bonding Bottlebrush Networks: Self-Healing Materials from Super-Soft to Stiff

The impact of polymer architecture on network dynamics and self-healing is presented using bottlebrushes containing side chains that are end-functionalized with 2-ureido-4[1H]-pyrimidinone (UPy). The synthesis of these materials is straightforward through a three-step process: (1) synthesizing rubbery poly(4-methylcaprolactone) macromonomers (p4MCL–OH) with a norbornene-based initiator, (2) functionalizing the terminal hydroxyl group with UPy–isocyanate (p4MCL–UPy), and (3) statistically copolymerizing p4MCL–OH and p4MCL–UPy via ring-opening metathesis polymerization (ROMP) to form hydrogen-bonding bottlebrushes having a fraction (p) of side chains functionalized with UPy. Attaching UPy to the free end of bottlebrush side chains dilutes the impact of friction from complementary UPy interactions on segmental dynamics, leading to a much weaker dependence of the glass-transition temperature (Tg) on p than observed in linear analogues, while the activation energy to dissociate UPy–UPy bonds (41–47 kJ/mol) remains mostly unchanged. Longer side chains result in a competition between reducing Tg and inducing entanglements that influence hydrogen-bonded network dynamics. Increasing the backbone length extends the sticky Rouse region without affecting the network modulus (Gx) or UPy–UPy dissociation time (τs). Gx scales linearly with p and ranges from 27 kPa to 1.6 MPa, while τs remains nearly constant in contrast to linear telechelic ionomers, implying a similar self-healability across bottlebrush networks containing different amounts of UPy. These stretchable networks with p ≤ 0.25 undergo self-healing upon repeated rupture and melt pressing at ≤100 °C while retaining similar tensile properties. In summary, decorating bottlebrush polymers with hydrogen bonds creates opportunities to independently manipulate associative network dynamics and mechanical moduli.

Scorpiands: Quinquedentate Ligands that Couple the Rigidity of Cyclam and the Flexibility of a Coordinating Side Chain

AbstractThis review tells the story of scorpiands, polyamine ligands which, when specifically stimulated, act as scorpions, and of their metal complexes, scorpiates. Scorpiands consist of a tetramine macrocycle (typically cyclam) capable of firmly including a transition metal and of a side chain ending with a nitrogen containing coordinating group: under unperturbed conditions the coordinating group is bound to the metal (ON), but on addition of acid the nitrogen is protonated and comes off the metal (OFF). Alternating acid/base addition makes the side chain move imitating the tail of a scorpion that bites a prey firmly immobilized by the claws. Occurrence of the ON‐OFF motion is monitored by the colour change of the scorpiate complexes associated to the change of coordination or by fluorescence quenching/restoring when a light‐emitting substituent is linked to the side arm. Scorpiate complexes can be considered optical molecular switches and, from a different standpoint, molecular machines able to convert chemical energy into mechanical work.

Side‐Chain Control of Topochemical Polymer Single Crystals with Tunable Elastic Modulus

AbstractTopochemical polymerizations hold the promise of producing high molecular weight and stereoregular single crystalline polymers by first aligning monomers before polymerization. However, monomer modifications often alter the crystal packing and result in non‐reactive polymorphs. Here, we report a systematic study on the side chain functionalization of the bis(indandione) derivative system that can be polymerized under visible light. Precisely engineered side chains help organize the monomer crystals in a one‐dimensional fashion to maintain the topochemical reactivity. By optimizing the side chain length and end group of monomers, the elastic modulus of the resulting polymer single crystals can also be greatly enhanced. Lastly, using ultrasonication, insoluble polymer single crystals can be processed into free‐standing and robust polymer thin films. This work provides new insights on the molecular design of topochemical reactions and paves the way for future applications of this fascinating family of materials.

Side-Chain Control of Topochemical Polymer Single Crystals with Tunable Elastic Modulus.

Topochemical polymerizations hold the promise of producing high molecular weight and stereoregular single crystalline polymers by first aligning monomers before polymerization. However, monomer modifications often alter the crystal packing and result in non-reactive polymorphs. Here, we report a systematic study on the side chain functionalization of the bis(indandione) derivative system that can be polymerized under visible light. Precisely engineered side chains help organize the monomer crystals in a one-dimensional fashion to maintain the topochemical reactivity. By optimizing the side chain length and end group of monomers, the elastic modulus of the resulting polymer single crystals can also be greatly enhanced. Lastly, using ultrasonication, insoluble polymer single crystals can be processed into free-standing and robust polymer thin films. This work provides new insights on the molecular design of topochemical reactions and paves the way for future applications of this fascinating family of materials.