Sheathless Interface Research Articles

A robust polymetallic-coated sheathless interface with high acid and alkali resistance for coupling capillary electrophoresis with mass spectrometry

A robust interface for coupling capillary electrophoresis (CE) to mass spectrometry (MS) was critical to maintain high separation efficiency of CE while achieving high sensitivity of MS. Current interfaces often suffer from problems such as reproducibility and ruggedness. For this purpose, a new polymetallic-coated sheathless interface was developed for the coupling of CE with MS. The electrical contact of the interface was achieved by etching one end of the fused silica capillary into a tapered tip using hydrofluoric acid (HF) solution, and then depositing a thin layer of chromium followed by a layer of platinum on it via physical vapor deposition technique. The performance of the new sheathless interface was systematically evaluated for the effect of flow rate and electrospray ionization (ESI) voltage on MS signal intensity, as well as the sample loading volume on CE separation efficiency and repeatability by using peptide standards and tryptic digest of bovine serum albumin (BSA). The interface was capable of generating stable electrospray even at ultra-low flow rate of 12.2 nL/min. In addition, the acid and alkali resistance of the polymetallic- coated emitter was tested by immersing it into 1M HCL and 1M NaOH solution, respectively. The results showed that polymetallic coating was still intact even after continuous immersion in the alkaline solution for 8 days (192 h) and a longer period in the acidic solution, indicating its excellent chemical stability. All the experimental results indicated that the sheathless interface fabricated by the new method in this study was robust and stable, making it promising for both sensitive and robust CE-MS sample analysis.

Highly sensitive detection of fluorescent whitening agents in flour using sheathless capillary electrophoresis-electrospray ionization-tandem mass spectrometry

Fluorescent whitening agents (FWAs) are dyes that emit visible blue or blue-purple fluorescence upon ultraviolet-light absorption. Taking advantage of light complementarity, FWAs can compensate for the yellow color of many substances to achieve a whitening effect; thus, they are used extensively in various applications. FWAs are generally stable, but their presence in the environment can lead to pollution and accumulation in the body through the food chain. Recent studies have revealed that some types of FWAs, such as coumarin-based FWAs, may exhibit photo-induced mutagenic effects that can trigger allergic reactions in humans and even pose carcinogenic risks. Hence, the development of an accurate and highly sensitive method for detecting FWAs in food-related samples is a crucial endeavor. Owing to the high polarity and structural similarity of FWAs, the accurate determination of these substances in complex food samples requires an analytical method that offers both efficient separation and sensitive detection. Capillary electrophoresis (CE) exhibits essential features such as high separation efficiency, short analysis times, very small sample injection requirements, minimal use of organic solvents, and simple operation. Thus, it is often used as an effective alternative to liquid chromatographic techniques. Over the past few decades, electrospray ionization mass spectrometry (ESI-MS) has been utilized as a highly sensitive and accurate detection method in numerous chemical analytical fields because it enables the analysis of molecular structures. By combining the high separation efficiency of CE with the high sensitivity of ESI-MS, a powerful tool for identifying and quantifying trace amounts of FWAs in food samples may be obtained. In this study, we present a method based on sheathless CE coupled with electrospray ionization tandem mass spectrometry (ESI-MS/MS) for the simultaneous detection of six trace FWAs in flour. In the proposed method, the CE separation device is directly coupled to the mass spectrometer through a sheathless interface without the need for a sheath liquid for electric contact, thereby avoiding the dilution of the analytes and improving detection sensitivity. Various conditions that could affect extraction recovery, separation efficiency, and detection sensitivity were evaluated and optimized. The FWAs were effectively extracted from the sample matrix with reduced matrix effects by ultrasonic-assisted extraction at a temperature of 30 ℃ for 20 min using CHCl3-MeOH (3∶2, v/v) as the extraction solvent. The extract was centrifuged, dried under N2, and reconstituted in CHCl3-MeOH (1∶4, v/v) for subsequent analysis. During the detection process, the CE device was coupled to the ESI-MS/MS instrument via a highly sensitive porous spray needle, which served as the sheathless electrospray interface. The target FWAs were scanned in positive-ion mode (ESI+) to ensure the stability and intensity of the obtained signals. Additionally, multiple-reaction monitoring (MRM) mode and MS/MS analysis were used to simultaneously quantify the six targets with high selectivity. The developed sheathless CE-ESI-MS/MS method detected the FWAs with high sensitivity over wide linear ranges with low method limits of detection (0.04-0.67 ng/g). The recoveries of the six target FWAs at three spiked levels were between 77.5% and 97.2%, with good interday (RSD≤11.5%) and intraday (RSD≤10.2%) precision. Analyses of the six target FWAs in eight commercial flour samples were performed using this method, and four positive samples were identified. These results demonstrate that the proposed CE-ESI-MS/MS method is a promising strategy for the determination of trace FWAs in complex food sample matrices with efficient separation and high sensitivity.

Coupling capillary electrophoresis-electrospray ionization mass spectrometry with sheathless interface for drug analysis

Capillary electrophoresis-mass spectrometry （CE-MS） combines the advantages of capillary electrophoresis， such as the high separation efficiency and low sample consumption， and the high detection sensitivity of mass spectrometry and the ability for providing the structural information for structure elucidation of unknown components. However， the interface technology for coupling capillary electrophoresis and mass spectrometry is still not well resolved. In the present work， we explored the application of the sheathless CE-MS interface which was prepared by gold foil-wrapped CE separation column tip directly as a spray electrode for the analysis of five tyrosine kinase inhibitors， namely sunitinib， imatinib mesylate， gefitinib， dasatinib and erlotinib. This interface integrates separation and electrospray ionization in one capillary， which is easy to manufacture， low in cost， and can be produced in batches. We found that using the nonaqueous CE separation mode can not only achieve baseline separation of five tyrosine kinase inhibitors， but also obtain stable mass spectrometry signals. First， we investigated the effect of the electrolyte solution composition on the separation. The optimized background electrolyte composition was obtained： 2% （v/v） acetic acid and 5 mmol/L ammonium acetate in acetonitrile-methanol （80∶20， v/v）. Under optimized conditions， the five kinase inhibitors could be baseline separated， meantime， the sheathless interface could also maintain stable electrospray for a long time. The relative standard deviation （RSD） values of the intraday and interday repeatability of the analyte retention times were less than 0.5% and 0.8%， respectively， and the RSD value between interface batches is less than 2.6%. Compared with CE-MS with aqueous phase， the separation column efficiency of the five tyrosine kinase inhibitors under nonaqueous phase conditions is higher， the detection sensitivity is higher， and the absolute detection limit reaches amol level. In addition， we evaluated the sheathless interface with various organic acids， such as palaflin A， salvianolic acid C， and rosmarinic acid， as well as hydrophobic macrolide antibiotics， azithromycin， erythromycin， and sporin A， good separation effect and mass spectrometric detection results can be obtained.

Nanoflow Sheath Voltage-Free Interfacing of Capillary Electrophoresis and Mass Spectrometry for the Detection of Small Molecules.

Coupling capillary electrophoresis (CE) to mass spectrometry (MS) is a powerful strategy to leverage a high separation efficiency with structural identification. Traditional CE-MS interfacing relies upon voltage to drive this process. Additionally, sheathless interfacing requires that the electrophoresis generates a sufficient volumetric flow to sustain the ionization process. Vibrating sharp-edge spray ionization (VSSI) is a new method to interface capillary electrophoresis to mass analyzers. In contrast to traditional interfacing, VSSI is voltage-free, making it straightforward for CE and MS. New nanoflow sheath CE-VSSI-MS is introduced in this work to reduce the reliance on the separation flow rate to facilitate the transfer of analyte to the MS. The nanoflow sheath VSSI spray ionization functions from 400 to 900 nL/min. Using the new nanoflow sheath reported here, volumetric flow rate through the separation capillary is less critical, allowing the use of a small (i.e., 20 to 25 μm) inner diameter separation capillary and enabling the use of higher separation voltages and faster analysis. Moreover, the use of a nanoflow sheath enables greater flexibility in the separation conditions. The nanoflow sheath is operated using aqueous solutions in the background electrolyte and in the sheath, demonstrating the separation can be performed under normal and reversed polarity in the presence or absence of electroosmotic flow. This includes the use of a wider pH range as well. The versatility of nanoflow sheath CE-VSSI-MS is demonstrated by separating cationic, anionic, and zwitterionic molecules under a variety of separation conditions. The detection sensitivity observed with nanoflow sheath CE-VSSI-MS is comparable to that obtained with sheathless CE-VSSI-MS as well as CE-MS separations with electrospray ionization interfacing. A bare fused silica capillary is used to separate cationic β-blockers with a near-neutral background electrolyte at concentrations ranging from 1.0 nM to 1.0 μM. Under acidic conditions, 13 amino acids are separated with normal polarity at a concentration ranging from 0.25 to 5 μM. Finally, separations of anionic compounds are demonstrated using reversed polarity under conditions of suppressed electroosmotic flow through the use of a semipermanent surface coating. With a near-neutral separation electrolyte, anionic nonsteroidal anti-inflammatory drugs are detected over a concentration range of 0.1 to 5.0 μM.

Affinity Capillary Electrophoresis-Mass Spectrometry as a Tool to Unravel Proteoform-Specific Antibody-Receptor Interactions.

Monoclonal antibody (mAb) pharmaceuticals consist of a plethora of different proteoforms with different functional characteristics, including pharmacokinetics and pharmacodynamics, requiring their individual assessment. Current binding techniques do not distinguish between coexisting proteoforms requiring tedious production of enriched proteoforms. Here, we have developed an approach based on mobility shift-affinity capillary electrophoresis–mass spectrometry (ACE–MS), which permitted us to determine the binding of coexisting mAb proteoforms to Fc receptors (FcRs). For high-sensitivity MS analysis, we used a sheathless interface providing adequate mAb sensitivity allowing functional characterization of mAbs with a high sensitivity and dynamic range. As a model system, we focused on the interaction with the neonatal FcR (FcRn), which determines the half-life of mAbs. Depending on the oxidation status, proteoforms exhibited different electrophoretic mobility shifts in the presence of FcRn, which could be used to determine their affinity. We confirmed the decrease of the FcRn affinity with antibody oxidation and observed a minor glycosylation effect, with higher affinities for galactosylated glycoforms. Next to relative binding, the approach permits the determination of individual KD values in solution resulting in values of 422 and 139 nM for double-oxidized and non-oxidized variants. Hyphenation with native MS provides unique capabilities for simultaneous heterogeneity assessment for mAbs, FcRn, and complexes formed. The latter provides information on binding stoichiometry revealing 1:1 and 1:2 for antibody/FcRn complexes. The use of differently engineered Fc-only constructs allowed distinguishing between symmetric and asymmetric binding. The approach opens up unique possibilities for proteoform-resolved antibody binding studies to FcRn and can be extended to other FcRs and protein interactions.

Standard procedures for native CZE-MS of proteins and protein complexes up to 800kDa.

Native mass spectrometry (nMS) is a rapidly growing method for the characterization of large proteins and protein complexes, preserving "native" non-covalent inter- and intramolecular interactions. Direct infusion of purified analytes into a mass spectrometer represents the standard approach for conducting nMS experiments. Alternatively, CZE can be performed under native conditions, providing high separation performance while consuming trace amounts of sample material. Here, we provide standard operating procedures for acquiring high-quality data using CZE in native mode coupled online to various Orbitrap mass spectrometers via a commercial sheathless interface, covering a wide range of analytes from 30-800kDa. Using a standard protein mix, the influence of various CZE method parameters were evaluated, such as BGE/conductive liquid composition and separation voltage. Additionally, a universal approach for the optimization of fragmentation settings in the context of protein subunit and metalloenzyme characterization is discussed in detail for model analytes. A short section is dedicated to troubleshooting of the nCZE-MS setup. This study is aimed to help normalize nCZE-MS practices to enhance the CE community and provide a resource for the production of reproducible and high-quality data.

Capillary electrophoresis-mass spectrometry and its application to proteomic analysis

Proteomic analysis plays an important role in basic biological studies and precision medicine. However, real samples contain numerous proteins with a wide dynamic distribution range. Such high complexity of the samples has a drastic effect on the identification coverage of proteins. Consequently, with advancements in mass spectrometry (MS) technology, concomitant improvements in separation technologies for simplifying the sample should be critical. With the advantages of small sample loading volume, high separation efficiency, and high speed, capillary electrophoresis (CE) coupled to MS has been gained much attention in the field of proteomics research. A nanoflow sheath liquid interface and a sheathless interface have been developed and commercialized, boosting the development of the CE-MS technology. Capillary zone electrophoresis (CZE), capillary isoelectric focusing (CIEF), and capillary electrochromatography (CEC) have been successfully combined with MS, and CZE-MS has widespread application. In proteomic research, the "bottom-up" strategy, which is based on the separation and identification of enzymatic peptides, is widely applied. With the limit of detection as low as 1 zmol for peptides, CE-MS has been successfully applied to single-cell proteomic analysis. Besides, CE is complementary to reversed-phase liquid chromatography (RPLC), providing a new approach for the separation and identification of peptides with similar hydrophobic properties (especially, post-translational peptides). The "top-down" strategy, which is based on the separation and identification of intact proteins, can directly provide more accurate and complete information about proteins. For protein separation, CE is advantageous in terms of the high separation resolution and high protein recovery, thereby improving the sensitivity and coverage of protein identification. Native MS enables successful identification and characterization of protein complexes under nondenaturing conditions. Because of the good compatibility of CE with MS, attempts have been made to use CE coupled with native MS for the separation and identification of protein complexes. In this review, the development of the CE-MS technology is first reported, including a robust and sensitive CE-MS interface, and a separation mode coupled to MS. Then, the application of the CE-MS technology to "bottom-up", "top-down" and native MS analysis is discussed. The superiority of CE-MS in proteomic analysis is also emphasized. Finally, the promising future prospects of CE-MS are discussed.

Analysis of metabolomics and proteomics based on capillary electrophoresis-mass spectrometry

Capillary electrophoresis-mass spectrometry (CE-MS) has the advantages of higher sensitivity, higher efficiency, and less sample consumption. Moreover, it possesses obvious advantages during the analysis of strongly charged and highly polar samples. CE-MS has been widely applied in life sciences, medicine, and pharmacology. In the past ten years, the main factors affecting its application were system stability, reproducibility, and data accuracy. In order to solve the existing problems of CE-MS, researchers have invested significant effort in technology innovation to further expand CE-MS application. In the fields of medicine and analytical chemistry, substantial research indicates that CE-MS is superior compared to other metabolomic and proteomic approaches. This study aims at reviewing the latest methods and applications developed in the fields of medicine and analytical chemistry since 2015. Furthermore, it also aims at enhancing the technology development-related application value of CE-MS and serving as a reference for future development. Further development of the CE-MS technology is discussed from the aspects of coating-sample interaction, interface types, and data processing methods. Concerning the coating types, neutral coatings had been applied extensively in CE-MS and there should be no limitation to the charge of the analyte. The coating decreased sample adsorption on the inner wall by covering the surface charge, greatly reducing the electroosmotic flow (EOF). A charged capillary coating could modify such an EOF direction. The cationic coating could reduce the hydrophobic interaction between the sample and the capillary column, resulting in higher EOF. If it is applied to the sheathless interface, the resolution could be improved by extending the capillary length. Anionic coatings are predominant among the anionic compounds, shortening the separation time by reducing the interaction between the anionic compounds and the capillary. The coating type should be chosen relative to the analyte characteristics. Concerning the interface technology, all interfaces should be simple, practical, and non-dependent on sheath liquid and background electrolytes. As far as data processing methods are concerned, it is necessary to design and develop a practical method for span space data comparison and processing. The optimized experimental conditions have effectively improved separation efficiency and data comparison analysis. Furthermore, they established a solid foundation for its application development. CE-MS analysis of complex samples in the fields of metabolomics and proteomics (e. g., of tissues, cells, body fluids, etc.) could provide a visualization method for future clinical analysis. It contributes to the development of cancer pathological analysis, drug development, disease surveillance, etc. The characteristic analysis of small molecule metabolites and protein biomarkers directly reflects on enzymatic activity in the biological systems. It could be associated with the development of various diseases/complications. Omics analysis also has an important directive to disease detection and surveillance with obvious advantages in disease diagnosis, staged treatment, drug development, and patient treatment progress. CE-MS is useful in detecting complications and promoting personalized medicine. It provides technical support for future clinical developments. In addition to a comprehensive review of the recent advances of CE-MS research, this paper also indicates the development directions of CE-MS. In order to avoid the problem of omics analysis and obtain the optimized analysis results, future analysis should be improved from the following three aspects:(i) The analysis conditions should be optimized concerning sample preparation methods and separation techniques. (ii) The analytic techniques should be supported to adjust to capillary coating and interface technology. (iii) New ideas should be developed in the fields of clinical research and statistical analysis.

A gold foil covered fused silica capillary tip as a sheathless interface for coupling capillary electrophoresis-mass spectrometry

A method for the preparation of an on-column ESI emitter used as the sheathless interface for coupling capillary electrophoresis (CE) with mass spectrometry (MS) was developed. The emitter was directly fabricated at the outlet end of the separation capillary which was etched with HF solution to a symmetrical tip. The tip was covered with a small piece of gold foil which was fixed by epoxy resin glue for electrical contact. Such a prepared ESI emitter can produce a stable ESI signal over the wide range of flow rate from 50 nL/min to 800 nL/min. The performance of the CE-MS with the sheathless interface was evaluated by using the separation of four alkaloids. It was found that the strong electroosmotic flow produced by the multiple polyelectrolyte coating on the capillary is necessary for maintaining a stable MS signal. Effect of the running buffer composition, concentration and the CE separation voltages on the ESI signal strength were investigated. The absolute detection limits for the alkaloids was determined as fmol level. Moreover, the CE-MS was applied for the analyses of trypsin digestion of cytochrome C and small molecular organic anions. The emitter performed very stable with a lifetime of at least 180 h.

Capillary Electrophoresis-Mass Spectrometry for Metabolic Profiling of Biomass-Limited Samples.

Capillary electrophoresis-mass spectrometry (CE-MS) is a strong separation technique for the highly efficient and selective analysis of polar and charged metabolites in biological samples. The CE approach is especially suited for the analysis of limited sample amounts due to its nanoliter injections from only a few microliters of material in the sample injection vial. In this protocol, a CE-MS strategy is outlined for the profiling of cationic metabolites in biomass-limited samples using a small amount of human hepatocellular carcinoma (HepG2) cells as a model system. By employing a sheathless interfacing design for coupling CE to MS, it is shown that information-rich profiles for cationic metabolites can be obtained when working with a starting amount of 10,000 HepG2 cells and even lower. Overall, the proposed CE-MS-based analytical workflow may be considered a useful tool for biomass-limited metabolomics studies.

Complementary middle-down and intact monoclonal antibody proteoform characterization by capillary zone electrophoresis - mass spectrometry.

High-resolution capillary zone electrophoresis - mass spectrometry (CZE-MS) has been of increasing interest for the analysis of biopharmaceuticals. In this work, a combination of middle-down and intact CZE-MS analyses has been implemented for the characterization of a biotherapeutic monoclonal antibody (mAb) with a variety of post-translational modifications (PTMs) and glycosylation structures. Middle-down and intact CZE separations were performed in an acidified methanol-water background electrolyte on a capillary with a positively charged coating (M7C4I) coupled to an Orbitrap mass spectrometer using a commercial sheathless interface (CESI). Middle-down analysis of the IdeS-digested mAb provided characterization of PTMs of digestion fragments. High resolution CZE enabled separation of charge variants corresponding to 2X-deamidated, 1X-deamidated, and non-deamidated forms at baseline resolution. In the course of the middle-down CZE-MS analysis, separation of glycoforms of the FC /2 fragment was accomplished due to hydrodynamic volume differences. Several identified PTMs were confirmed by CZE-MS2 . Incorporation of TCEP-HCl reducing agent in the sample solvent resulted in successful analysis of reduced forms without the need for alkylation. CZE-MS studies on the intact mAb under denaturing conditions enabled baseline separation of the 2X-glycosylated, 1X-glycosylated, and aglycosylated populations as a result of hydrodynamic volume differences. The presence of a trace quantity of dissociated light chain was also detected in the intact protein analysis. Characterization of the mAb under native conditions verified identifications achieved via intact analysis and allowed for quantitative confirmation of proteoforms. Analysis of mAbs using CZE-MS represents a complementary approach to the more conventional liquid-chromatography - mass spectrometry-based approaches.

Coupling nanoliter high-performance liquid chromatography to inductively coupled plasma mass spectrometry for arsenic speciation.

Nanoliter high-performance liquid chromatography shows low consumption of solvents and samples, offering one of the best choices for arsenic speciation in precious samples in combination with inuctively coupled plasma mass spectrometry. A systematic investigation on coupling nanoliter high-performance liquid chromatography to inductively coupled plasma mass spectrometry from instrument design to injected sample volume and mobile phase was performed in this study. Nanoflow mobile phase was delivered by flow splitting using a conventional high-pressure pump with reuse of mobile phase waste. Dead volume was minimized to 60nL for the sheathless interface based on the previously developed nanonebulizer. Capillary columns for nanoliter high-performance liquid chromatography were found to be sensitive to sample loading volume. An apparent difference was also found between the mobile phases for nanoliter and conventional high-performance liquid chromatography. Baseline separation of arsenite, arsenate, monomethylarsenic, and dimethylarsenic was achieved within 11min on a 15cm C18 capillary column and within 12min on a 25cm strong anion exchange column. Detection limits of 0.9-1.8μg/L were obtained with precisions variable in the range of 1.6-4.2%. A good agreement between determined and certified values of a certified reference material of human urine (GBW 09115) validated its accuracy along with good recoveries (87-102%).

Capillary electrophoresis–mass spectrometry for direct structural identification of serum N-glycans

Through direct coupling of capillary electrophoresis (CE) to mass spectrometry (MS) with a sheathless interface, we have identified 77 potential N-glycan structures derived from human serum. We confirmed the presence of N-glycans previously identified by indirect methods, e.g., electrophoretic mobility standards, obtained 31 new N-glycan structures not identified in our prior work, differentiated co-migrating structures, and determined specific linkages on isomers featuring sialic acids. Serum N-glycans were cleaved from proteins, neutralized via methylamidation, and labeled with the fluorescent tag 8-aminopyrene-1,3,6-trisulfonic acid, which renders the glycan fluorescent and provides a −3 charge for electrophoresis and negative-mode MS detection. The neutralization reaction also stabilizes the labile sialic acids. In addition to methylamidation, native charges from sialic acids were neutralized through reaction with 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium to amidate α2,6-linked sialic acids in the presence of ammonium chloride and form lactones with α2,3-linked sialic acids. This neutralization effectively labels each type of sialic acid with a unique mass to determine specific linkages on sialylated N-glycans. For both neutralization schemes, we compared the results from microchip electrophoresis and CE.

Analysis of Proteins, Protein Complexes, and Organellar Proteomes Using Sheathless Capillary Zone Electrophoresis - Native Mass Spectrometry.

Native mass spectrometry (MS) is a rapidly advancing field in the analysis of proteins, protein complexes, and macromolecular species of various types. The majority of native MS experiments reported to-date has been conducted using direct infusion of purified analytes into a mass spectrometer. In this study, capillary zone electrophoresis (CZE) was coupled online to Orbitrap mass spectrometers using a commercial sheathless interface to enable high-performance separation, identification, and structural characterization of limited amounts of purified proteins and protein complexes, the latter with preserved non-covalent associations under native conditions. The performance of both bare-fused silica and polyacrylamide-coated capillaries was assessed using mixtures of protein standards known to form non-covalent protein-protein and protein-ligand complexes. High-efficiency separation of native complexes is demonstrated using both capillary types, while the polyacrylamide neutral-coated capillary showed better reproducibility and higher efficiency for more complex samples. The platform was then evaluated for the determination of monoclonal antibody aggregation and for analysis of proteomes of limited complexity using a ribosomal isolate from E. coli. Native CZE-MS, using accurate single stage and tandem-MS measurements, enabled identification of proteoforms and non-covalent complexes at femtomole levels. This study demonstrates that native CZE-MS can serve as an orthogonal and complementary technique to conventional native MS methodologies with the advantages of low sample consumption, minimal sample processing and losses, and high throughput and sensitivity. This study presents a novel platform for analysis of ribosomes and other macromolecular complexes and organelles, with the potential for discovery of novel structural features defining cellular phenotypes (e.g., specialized ribosomes). Graphical Abstract ᅟ.

The Development of a Sheathless Interface for Capillary Electrophoresis Electrospray Ionization Mass Spectrometry Using a Cellulose Acetate Cast Capillary

The fabrication of a novel sheathless interface for capillary electrophoresis–electrospray–mass spectrometry (CE–ESI–MS) is described. A programmable CO2 laser was used to ablate small channels in the walls of a polyimide capillary near the terminus. Subsequent exposure of the channel region to a cellulose acetate solution followed by drying resulted in the formation of an electrically conductive semi-permeable membrane. Application of an appropriate voltage to the reservoir resulted in the simultaneous establishment of an electrical connection for CE and ESI. Interface viability was demonstrated by conducting a CE separation of a peptide mixture, with detection accomplished via positive ion mode ESI–MS. For the peptide Val-Tyr-Val, a limit of detection of 0.1 femtomole (S/N 3) was achieved using single reaction monitoring. Attributes of the interface include structural robustness, ease of fabrication, minimal interface dead volume, and the ability to alter post-separation analyte ionization status by use of appropriate buffers in the interface reservoir.

Evaluation of capillary electrophoresis-mass spectrometry for the analysis of the conformational heterogeneity of intact proteins using beta2-microglobulin as model compound

In this work we explored the feasibility of different CE-ESI-MS set-ups for the analysis of conformational states of an intact protein. By using the same background electrolyte at quasi physiological conditions (50 mM ammonium bicarbonate, pH 7.4) a sequential optimization was carried out, initially by evaluating a sheath-liquid interface with both a single quadrupole (SQ) and a time-of-flight (TOF) mass spectrometer; then a sheathless interface coupled with high-resolution QTOF MS was considered. Beta2-microglobulin has been taken as a model, as it is an amyloidogenic protein and its conformational changes are strictly connected to the onset of a disease. The separation of two conformers at dynamic equilibrium is achieved all the way down to the MS detection. Notably, the equilibrium ratio of the protein conformers is maintained in the electrospray source after CE separation. Strengths and weaknesses of each optimized set-up are emphasized and their feasibility in unfolding studies is evaluated. In particular, ESI-TOF MS can assign protein forms that differ by 1 Da only and sheathless interfacing is best suited to preserve protein structure integrity. This demonstrates the CE-ESI-MS performance in terms of separation, detection and characterization of conformational species that co-populate a protein solution.

Sheathless interface to match flow rate of capillary electrophoresis with electrospray mass spectrometry using regular-sized capillary.

The flow rate match has been a great challenge when coupling capillary electrophoresis (CE) with electrospray ionization mass spectrometry (ESI-MS). Conventional CE-ESI-MS interfaces used liquid sheath flow, narrowed capillary or additional pressure to meet this requirement; sacrifice of either capillary inner diameter (i.d.) or separation efficiency is often inevitable. Thus, a regular-sized capillary-based sheathless interface would be attractive for flow rate match in CE-MS. The regular-sized capillary-based CE-MS interface was achieved by coupling CE with induced electrospray ionization (iESI) which was stimulated by the fact that the iESI could both achieve flow rate down to 0.2μL/min and retain ionization efficiency. The CE-iESI-MS interface was completed with an intact separation capillary, outside the outlet end of which a metal electrode was attached for the application of alternating current (ac) high voltage (HV). The feasibility of this CE-iESI-MS interface was demonstrated through the stable total ion chromatograms obtained by continuous CE infusion of tripropylamine with regular-sized capillaries. Tripropylamine and atenolol were separated and detected successfully in phosphate buffer solution (PBS) by CE-iESI-MS using a 50 or 75μm i.d. capillary. Furthermore, this new interface showed a better signal-to-noise (S/N) of 3 to 7 times enhancement compared with another sheathless CE-ESI-MS interface that using one high voltage for both separation and electrospray when analyzing the mixture of tripropylamine and proline in NH4 OAc buffer. In addition, the reproducibility of this interface gave satisfactory results with relative standard deviation (RSD) in retention time in the range between 1% and 3%. The novel sheathless CE-MS interface introduced here could match conventional electroosmotic flow (EOF) with electrospray which could also preserve the separation efficiency and sensitivity of CE-MS. This newly developed CE-iESI-MS interface was also demonstrated to be effective for different buffers, PBS and NH4 OAc, without any additives such as methanol and acetic acid. Hence, we believe that this sheathless CE-MS interface could be operated with other nonvolatile and volatile buffers. Copyright © 2016 John Wiley & Sons, Ltd.

Independent highly sensitive characterization of asparagine deamidation and aspartic acid isomerization by sheathless CZE-ESI-MS/MS.

Amino acids residues are commonly submitted to various physicochemical modifications occurring at physiological pH and temperature. Post-translational modifications (PTMs) require comprehensive characterization because of their major influence on protein structure and involvement in numerous in vivo process or signaling. Mass spectrometry (MS) has gradually become an analytical tool of choice to characterize PTMs; however, some modifications are still challenging because of sample faint modification levels or difficulty to separate an intact peptide from modified counterparts before their transfer to the ionization source. Here, we report the implementation of capillary zone electrophoresis coupled to electrospray ionization tandem mass spectrometry (CZE-ESI-MS/MS) by the intermediate of a sheathless interfacing for independent and highly sensitive characterization of asparagine deamidation (deaN) and aspartic acid isomerization (isoD). CZE selectivity regarding deaN and isoD was studied extensively using different sets of synthetic peptides based on actual tryptic peptides. Results demonstrated CZE ability to separate the unmodified peptide from modified homologous exhibiting deaN, isoD or both independently with a resolution systematically superior to 1.29. Developed CZE-ESI-MS/MS method was applied for the characterization of monoclonal antibodies and complex protein mixture. Conserved CZE selectivity could be demonstrated even for complex samples, and foremost results obtained showed that CZE selectivity is similar regardless of the composition of the peptide. Separation of modified peptides prior to the MS analysis allowed to characterize and estimate modification levels of the sample independently for deaN and isoD even for peptides affected by both modifications and, as a consequence, enables to distinguish the formation of l-aspartic acid or d-aspartic acid generated from deaN. Separation based on peptide modification allowed, as supported by the ESI efficiency provided by CZE-ESI-MS/MS properties, and enabled to characterize and estimate studied PTMs with an unprecedented sensitivity and proved the relevance of implementing an electrophoretic driven separation for MS-based peptide analysis.

High Resolution CZE-MS Quantitative Characterization of Intact Biopharmaceutical Proteins: Proteoforms of Interferon-β1.

New and improved methods are required for the enhanced characterization of complex biopharmaceuticals, especially those with charge and glycan heterogeneity. High resolution separation and mass spectrometry (MS) analysis of intact proteoforms can contribute significantly to the characterization of such proteins, many of which are glycoproteins. Here, we report on capillary zone electrophoresis (CZE) coupled via a commercial CESI sheathless interface to an Orbitrap ELITE MS for the intact analysis of recombinant human interferon-β1 (Avonex, rhIFN-β1), a biopharmaceutical with complex glycosylation at a single N-linked site. Using a cross-linked polyethylenimine coating, column efficiencies between 350,000 and 450,000 plates were produced, allowing separation based on charge and subtle hydrodynamic volume differences. A total of 138 proteoforms were found, and 55 were quantitated. Charge species due to deamidation and sialylation were separated by CZE. Given the high column efficiency, isobaric positional isomers of a single sialic acid on biantennary glycan antennae were resolved. Further, triantennary isomers (antenna on α(1-3) or α(1-6) arms) were separated and confirmed by exoglycosidase digestion. Proteoforms of the N-terminal cleavage of methionine were detected by precursor molecular weight and top-down ETD and HCD analysis of the reduced protein. Quantitative analysis suggested potential correlations between the methionine loss with the relative amount of the deamidation, as well as the level of deamidation with glycan structure. We demonstrate that high resolution CZE separation of intact glycoprotein species coupled to MS has significant potential for the in-depth characterization and quantitative analysis of biopharmaceutical proteoforms.

Capillary electrophoresis in an extended nanospray tip–electrospray as an electrophoretic column

Capillary electrophoresis coupled to mass spectrometry (CE/MS) is gaining its space among the most powerful tools in modern (bio)analytical laboratory. The most challenging instrumental aspect in CE/MS is striking the balance between the stability and reproducibility of the signal and sensitivity of the analysis. Several interface designs have been published in the past decade addressing the variety of instrumental aspects and ease of operation. Most of the interfaces can be categorized either into the sheath flow arrangement (considered to be a de facto standard), or sheathless interface, often expected to provide the ultimate sensitivity. In this work we have explored an “interface-free” approach, where the CE/MS analysis was performed in narrow bore (<20μm ID) electrospray capillary. The separation capillary and electrospray tip formed one entity and the high voltage, applied at the injection end of the capillary served for both the separation and electrospray ionization. Thus the separation voltage was defined as the product of the electrospray current and resistivity of the separation electrolyte. Optimum conditions for the separation and electrospray ionization were achieved with voltage programming. The performance of this simplest possible CE/MS system was tested on peptide separations from the cytochrome c tryptic digest. The subnanoliter sample consumption and sensitivity in the attomole range predetermines such a system for analysis of limited samples.