Stereoselective Research Articles

Key Strategies for Continuous Seawater Splitting for Hydrogen Production: From Principles and Catalyst Materials to Electrolyzer Engineering

AbstractDue to the high cost of ultra‐pure water supply and the mismatch between water sources and renewable energy distribution, the large‐scale production of green hydrogen through seawater electrolysis has generated significant interest. This presents an attractive potential technology within the framework of carbon‐neutral energy production. However, owing to the complex composition of seawater, particularly the competitive oxidation reactions and corrosion issues involving Cl−, seawater electrolysis has suffered from low selectivity and poor stability in oxygen evolution reaction (OER), which severely impact the efficiency of hydrogen production and hinder the practical applications. To further promote in‐depth research and practical applications of seawater electrolysis, this review introduces the principles, key advantages, and challenges of seawater electrolysis. Specifically, the design strategies are categorized for highly active OER electrocatalysts for seawater electrolysis, including catalyst design, design of chemical reaction systems, and other special process design. To ensure long‐term operational stability of seawater electrolysis, various strategies such as employing self‐supporting materials, surface protection strategies, and electrolyzer design, are discussed. Finally, current challenges and future prospects for the industrialization of seawater electrolysis are proposed and discussed. It is expected that this review provides new insights for large‐scale seawater‐based hydrogen production in the future.

Physically hybrid Zr(OH)4 + CuO catalyzed selective aniline oxidation: A new Ph‐N˙OH mediated mechanism

AbstractDeveloping the sustainable and cost‐effective heterogeneous catalytic system for controlling chemoselectivity holds substantial importance in fine organic chemicals. Herein we construct a unique Zr(OH)4 + CuO physically hybrid system for selective oxidation of anilines. Zr(OH)4 alone leads to azoxybenzene formation, and Zr(OH)4 + CuO shifts the reaction favorably toward nitrosobenzene. The proximity study indicates Zr(OH)4 + CuO outperforms its counterparts synthesized through methods like ball‐milling, loading, and coprecipitation, because the closer proximity exhibits stronger chemical interaction, restricting the activity of Zr‐OH hydroxyl sites. Through mechanistic experiments, in situ DRIFT‐IR and DFT calculations, a new Ph‐OH intermediate mechanism is firstly proposed. Two Ph‐OH self‐condensate to form azoxybenzene for only Zr(OH)4, whereas Zr(OH)4 + CuO could promote rapid transformation of Ph‐OH to nitrosobenzene on CuO through a hydrogen transfer process. Moreover, Zr(OH)4 + CuO displays good recyclability and robust scalability. This is the first report demonstrating the utilization of a physically hybrid catalyst to adjust the selectivity of the aniline oxidation reaction.

Electron Transfer Induced by the Change of Spin States as a Catalytic Descriptor on C2N-TM Single-Atom Catalysts.

The catalytic activity and selectivity of metal single-atom catalysts strongly depend upon their spin states. However, their intrinsic connections are not yet clear. In this work, we evaluate the catalytic activity and selectivity of oxygen reduction reactions (ORRs) on C2N-supporting 3d transition metal (TM = Mn/Co/Ni/Cu) single-atom catalysts (SACs) using the density functional theory calculations. It is found that all of the SACs with different spin states tend to follow the 2e- H2O2 pathway, except for C2N-Mn (S = 1/2), which takes the 4e- OOH pathway. Interestingly, we found that the sum of the changes in the electron spin moments of the metal active centers and the reaction intermediate OOH affects the OOH electron transfer, and the electron transfer promotes the catalytic activity of the 2e- H2O2 pathway on C2N-TM SACs. Moreover, there is a strong linear relationship between the OOH electron transfer and the catalytic activity of the 2e- H2O2 pathway on C2N-TM SACs. These findings indicate that electron transfer induced by the change of spin states serves as a descriptor of the catalytic activity of the 2e- H2O2 pathway on C2N-TM SACs, which is very helpful for designing more powerful SACs.

Origin of Manipulating Selectivity in Prins Cyclization by [Ga4L6]12- Supramolecular Catalysis through Host-Guest Interactions.

The host effect of the supramolecular [Ga4L6]12- tetrahedral metallocage on Prins cyclization reaction of the substrate by encapsulated citronellal has been investigated by means of molecular dynamics and quantum mechanics. The encapsulation process of the substrate into the [Ga4L6]12- cavity was simulated via attach-pull-release (APR) methods. Thermodynamic calculations and classical molecular dynamics simulations assessed the substrate's microenvironment inside the cavity, guiding DFT-level modeling of the reaction. DFT calculations show diol product predominance in acidic solution but high enol selectivity inside [Ga4L6]12-, consistent with experimental findings. [Ga4L6]12- alters the selectivity of the Prins cyclization reaction by inhibiting diol formation. The activation strain model-based decomposition analysis (ASM-DA) of the barrier difference among distortion and interaction terms indicates that the more positive interaction between a host and guest in the diol transition state than enol determines the product selectivity, particularly the fewer C-H···O and O-H···O hydrogen-bonding interactions. These theoretical insights could contribute to a deeper understanding of the nature of supramolecular catalysis and to further develop new supramolecular catalysts.

Metal-Nitrate-Catalyzed Levulinic Acid Esterification with Alkyl Alcohols: A Simple Route to Produce Bioadditives

This work developed an efficient route to produce fuel bioadditive alkyl levulinates. Special attention was paid to butyl levulinate, which is a bioadditive with an adequate carbon chain size to be blended with liquid fuels such as diesel or gasoline. In this process, levulinic acid was esterified with butyl alcohol using cheap and commercially affordable metal nitrates as catalysts, producing bioadditives at more competitive costs. Iron (III) nitrate was the most active and selective catalyst toward butyl levulinate among the salts evaluated. In solvent-free conditions, with a low molar ratio and catalyst load (1:6 acid to alcohol, 3 mol% of Fe (NO3)3), conversion and selectivity greater than 90% after an 8 h reaction was achieved. A comparison of the iron (III) nitrate with other metal salts demonstrated that its superior performance can be assigned to the highest Lewis acidity of Fe3+ cations. Measurements of pH allow the conclusion that a cation with high Lewis acidity led to a greater H+ release, which results in a higher conversion. Butyl levulinate and pseudobuty levulinate were always the primary and secondary products, respectively. The consecutive character of reactions between butyl alcohol and levulinic acid (formation of the pseudobutyl levulinate and its conversion to butyl levulinate) was verified by assessing the reactions at different temperatures and conversion rates. A variation in Fe(NO3)3 catalyst load impacted the conversion much more than reaction selectivity. The same effect was verified when the reactions were carried out at different temperatures. The reactivity of alcohols with different structures depended more on steric hindrance on the hydroxyl group than the size of the carbon chain. A positive aspect of this work is the use of a commercial iron nitrate salt as the catalyst, which has advantages over traditional mineral acids such as sulfuric and hydrochloric acids. This solid catalyst is not corrosive and avoids neutralization steps after reactions, minimizing the generation of residues and effluents.

Selective Extraction of Valuable and Critical Metals in Cassiterite Concentrate by Dry Chlorination, Part I: Thermodynamic and Modelling Perspective.

The chlorination of oxides of major concern in cassiterite concentrate with various chlorinating agents is investigated in light of their thermodynamic feasibilities to extract and recover their valuable metal components. Mechanisms responsible for the processes and their Gibbs free energy changes as a function of temperature to selectively separate and/or recover the metal(s) of interest and unwanted ones as their metallic chlorides are identified. Attention is given to gaseous (Cl2 and Cl2 + CO mixture) and solid (CaCl2 and MgCl2) chlorine sources, from which Cl2 + CO shows no reaction selectivity for any of the oxides but a feasible metal chloride formation for all. Chlorine gas (Cl2), on the other hand, could selectively form chlorides with metals of +2 oxidation state in their oxides, leaving those of high oxidation state unreacted. MgCl2, unlike CaCl2, is found capable of producing calcium, ferrous, and stannic chloride from their metallic oxides with enhanced reaction tendencies in the presence of silicon dioxide (SiO2). An overall study of the thermodynamic feasibility of all chlorine sources looked at alongside operational and environmental viabilities suitably suggests MgCl2 for a selective extraction of the valuable metal components in a cassiterite concentrate, in which case, moderate temperatures seem promising.

Synthesis, characterization, and performance evaluation of unsupported tetrametallic CoMoMnAl and CoMoZnAl catalysts for selective hydrodesulfurization (HDS)

New formulations of unsupported tetrametallic catalysts derived from layered double hydroxides (LDH) compounds were synthesized by a constant pH coprecipitation method, characterized, and evaluated in the selective hydrodesulfurization (HDS) of thiophene in the presence of cyclohexene. The layered double hydroxides were prepared using terephthalate (C8H8O2)2- as the interlayer anion with nominal aluminum molar fraction of 0.5, and nominal cobalt to MII (M = Zn or Mn) ratios of 0.2, 0.4 and 0.6. Molybdenum introduction in the LDH precursor was accomplished by an ion exchange process using the heptamolybdate anion. The calcined Mn samples showed a higher surface area than those obtained from Zn. The sulfidation was carried out in situ with a heating ramp up to 673 K and the catalysts were evaluated in a tubular flow reactor. The catalytic evaluation of Zn and Mn-based materials for simultaneous thiophene HDS and cyclohexene hydrogenation (HYD) was conducted at 573 K and 20 bar. The results show that the Zn-based unsupported catalysts synthesized here exhibited higher selectivity for the HDS reaction than an industrial one.

Yeast Surface Display Enables One‐Step Production and Immobilization of Unspecific Peroxygenases

AbstractUnspecific peroxygenases (UPOs) are regarded as a “dream catalyst” for selective oxyfunctionalization reactions like oxygenations. We present the display of the model UPO rAaeUPO (PaDa−I) on the cell surface of the heterologous production host Komagataella phaffii as a one‐step production and immobilization process. The coding sequence for PaDa−I was combined with genes coding for cell wall proteins from Saccharomyces cerevisiae and transformed into K. phaffii. The fusion proteins were compared among each other and with secreted, free PaDa−I. One system in particular, a C‐terminal fusion of PaDa−I and Sag1 yielded near identical activity per volume culture broth to the secreted PaDa−I with ~90 % of the activity being at the cell wall. The surface display simplifies downstream processing and includes immobilization on a cheap, retainable and replaceable matrix, that is the production host itself. The enzymes remained active in a repeated batch process for 10 batches and 200 h of catalysis.

Enhanced CO2 Reduction on a Cu-Decorated Single-Atom Catalyst via an Inverse Sandwich M-Graphene-Cu Structure.

The highly active and selective electrochemical CO2 reduction reaction (CO2RR) can be exploited to produce valuable chemicals and fuels and is also crucial for achieving clean energy goals and environmental remediation. Decorated single-atom catalysts (D-SACs), which feature synergistic interactions between the active metal site (M) and an axially decorated ligand, have been extensively explored for the CO2RR. Very recently, novel double-atom catalysts (DACs) featuring inverse sandwich structures were theoretically proposed and identified as promising CO2RR electrocatalysts. However, the experimental synthesis of DACs remains a challenge. To facilitate the fabrication and to realize the potential of these novel DACs, we designed a D-SAC system, denoted as M1@gra+Cuslab. This system features a graphene layer with a vacancy-anchored SAC, all stacked on a Cu(111) surface, thereby embodying a Cu slab-supported inverse sandwich M-graphene-Cu structure. Using density functional theory calculations, we evaluated the stability, selectivity, and activity of 27 M1@gra+Cuslab systems (M = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Y, Zr, Nb, Mo, Ru, Rh, Pd, Ag, Cd, Hf, Ta, W, Re, Os, Ir, Pt, or Au) and showed five M1@gra+Cuslab (M = Co, Ni, Cu, Rh, or Pd) systems exhibit optimal characteristics for the CO2RR and can potentially outperform their SAC and DAC counterparts. This study offers a new strategy for developing highly efficient CO2RR D-SACs with an inverse sandwich structural moiety.

Excimer-ultraviolet-lamp-assisted selective etching of single-layer graphene and its application in edge-contact devices

Since the discovery of graphene and its remarkable properties, researchers have actively explored advanced graphene-patterning technologies. While the etching process is pivotal in shaping graphene channels, existing etching techniques have limitations such as low speed, high cost, residue contamination, and rough edges. Therefore, the development of facile and efficient etching methods is necessary. This study entailed the development of a novel technique for patterning graphene through dry etching, utilizing selective photochemical reactions precisely targeted at single-layer graphene (SLG) surfaces. This process is facilitated by an excimer ultraviolet lamp emitting light at a wavelength of 172 nm. The effectiveness of this technique in selectively removing SLG over large areas, leaving the few-layer graphene intact and clean, was confirmed by various spectroscopic analyses. Furthermore, we explored the application of this technique to device fabrication, revealing its potential to enhance the electrical properties of SLG-based devices. One-dimensional (1D) edge contacts fabricated using this method not only exhibited enhanced electrical transport characteristics compared to two-dimensional contact devices but also demonstrated enhanced efficiency in fabricating conventional 1D-contacted devices. This study addresses the demand for advanced technologies suitable for next-generation graphene devices, providing a promising and versatile graphene-patterning approach with broad applicability and high efficiency.

Nitrate reduction on bimetallic (Pd0.09Sn0.91) electrodes: Effects of calcination temperature, electrode support, and quenching

The effects of fabrication process, namely, calcination temperature, electrode support, and quenching, on electrochemical nitrate reduction were investigated, exemplified by Pd0.09Sn0.91 electrode. The electrode was characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, energy-dispersive X-ray spectroscopy, and cyclic voltammetry. Results showed that electrode surface morphology, crystalline formation, and chemical composition, which were influenced by the electrode fabrication process, controlled nitrogen selectivity and nitrate reduction reactivity. The Pd0.09Sn0.91/SS electrodes were calcined at different temperatures (from 100 to 700 °C) for 3 h in air and the results showed that high calcination temperature rendered electrode oxidized, and decreased nitrogen selectivity and nitrate reduction capability. Electrode supports affected nitrate reduction following the order of Ni ≈SS > G > Ti. Quenching electrode in ice water decreased nitrate reduction capability. Porous surface with small oxygen content, less degree of metal oxidation (i.e., higher fraction of Pd0 and Sn0), and Sn crystals favored nitrogen selectivity and nitrate removal.

Chemoselective and Triggered Decomposition of Diazo Esters by the [(IMes)Rh2(OAc)4] Complex: En Route to Assisted Tandem Catalysis from Mixtures of Diazo Compounds

AbstractDecomposition of aryl and unsubstituted diazo ester into Rh(II)‐carbenes by the [(IMes)Rh2(OAc)4] complex is shown to be slower than with Rh2(OAc)4. Diazo esters substituted by a second electron‐withdrawing group do not suffer nitrogen extrusion when exposed for several hours to this (NHC)Rh(II) complex at room temperature. This chemoselective decomposition of diazo esters depending on their substituent (Ar, H, EWG) can furthermore be achieved on a mixture of substrates. The catalytic activity of [(IMes)Rh2(OAc)4] towards electron‐poor diazo compounds is also restored by heating to reflux in chloroform, or after decomplexation of the NHC by addition of GaCl3. The [(IMes)Rh2(OAc)4] complex was then used to induce a fully selective reaction cascade from a mixture of two diazo esters. First, a donor/acceptor diazo compound was decomposed selectively at room temperature to give an intermolecular O−H insertion product without any decomposition of the electron poor diazo compound. Addition of GaGl3 then triggered nitrogen extrusion from the diazo malonate to give a 1,5‐C−H insertion product. This transformation, where decomposition of diazo compounds catalyzed by Rh(II) complexes can be externally controlled, represents the first example of assisted tandem catalysis with two metal carbene precursors.

Breaking the inactivity of MXenes to drive Ampere-level selective oxygen evolution reaction in seawater

The limited activity and stability of conventional anodes in seawater have posed a significant obstacle to sustainable green hydrogen production directly from seawater via electrolysis. To address these challenges, we engineered Ti3C2Tx-MXene by incorporating iron and boron into its matrix (tagged FBT) for selective oxygen evolution reaction (OER). Positioning B underneath the top layer induces charge disparity on the Fe-sites, which influences the subsequent growth of the ZIF-67 metal-organic framework (MOF) on the MXene surface through Fe-O-Co ionic bonds. DFT calculations reveal a favorable binding energy of −2.30 eV at the heterointerface for ZIF-67 adsorption to the surface of FBT via O-Co bond, a shortened bond length of 1.94 Å, confirming the formation of ionic bonds. These ionic bonds tune the active sites for an enhanced and selective OER over chlorine evolution reaction (CER), preventing active Fe species' leaching and ensuring stability at >1.56 A cm−2 in 6 M alkaline seawater over 370 hours. Further, FBT and ZIF-67/FBT require low overpotentials of 521.2 and 508 mV, respectively, to deliver 1 A cm−2 in 6 M alkaline seawater. Our findings demonstrate a robust strategy to significantly expand the potential of MXenes from simple conductive substrates to efficient OER catalysts for seawater splitting and beyond.

Highly Self-Healing Co3+/Ni3+ Dual-Active Species for the Electrocatalytic Oxidation of 5-Hydroxymethylfurfural.

Electrocatalytic conversion of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) is significant for the sustainable production of value-added chemicals. Active sites of catalysts could enhance the activity and selectivity of the HMF oxidation reaction (HMFOR), but the self-healing ability of active sites has been commonly ignored. In this work, Co(OH)2/Ni-MOF was successfully fabricated for efficient oxidation of HMF to FDCA under mild conditions. Electrochemical and cyclic stability experiments demonstrated the high self-healing properties of the dual active sites (Co3+/Ni3+). So, the retention rate of FDCA yield can still reach 98.5%, even after 90 days. HMFOR was further coupled with 4-nitrophenol hydrogenation, which promotes the yield and Faradaic efficiency of FDCA to about 100%. Therefore, this study explores the self-healing properties of species and provides new insights for designing efficient catalysts.

Au@AuPd Core-Alloyed Shell Nanoparticles for Enhanced Electrocatalytic Activity and Selectivity under Visible Light Excitation.

Plasmonic catalysis has been employed to enhance molecular transformations under visible light excitation, leveraging the localized surface plasmon resonance (LSPR) in plasmonic nanoparticles. While plasmonic catalysis has been employed for accelerating reaction rates, achieving control over the reaction selectivity has remained a challenge. In addition, the incorporation of catalytic components into traditional plasmonic-catalytic antenna-reactor nanoparticles often leads to a decrease in optical absorption. To address these issues, this study focuses on the synthesis of bimetallic core@shell Au@AuPd nanoparticles (NPs) with ultralow loadings of palladium (Pd) into gold (Au) NPs. The goal is to achieve NPs with an Au core and a dilute alloyed shell containing both Au and Pd, with a low Pd content of around 10 atom %. By employing the (photo)electrocatalytic nitrite reduction reaction (NO2RR) as a model transformation, experimental and theoretical analyses show that this design enables enhanced catalytic activity and selectivity under visible light illumination. We found that the optimized Pd distribution in the alloyed shell allowed for stronger interaction with key adsorbed species, leading to improved catalytic activity and selectivity, both under no illumination and under visible light excitation conditions. The findings provide valuable insights for the rational design of antenna-reactor plasmonic-catalytic NPs with controlled activities and selectivity under visible light irradiation, addressing critical challenges to enable sustainable molecular transformations.

Selective Synthesis of Organonitrogen Compounds via Electrochemical C-N Coupling on Atomically Dispersed Catalysts.

The C-N coupling reaction demonstrates broad application in the fabrication of a wide range of high value-added organonitrogen molecules including fertilizers (e.g., urea), chemical feedstocks (e.g., amines, amides), and biomolecules (e.g., amino acids). The electrocatalytic C-N coupling pathways from waste resources like CO2, NO3-, or NO2- under mild conditions offer sustainable alternatives to the energy-intensive thermochemical processes. However, the complex multistep reaction routes and competing side reactions lead to significant challenges regarding low yield and poor selectivity toward large-scale practical production of target molecules. Among diverse catalyst systems that have been developed for electrochemical C-N coupling reactions, the atomically dispersed catalysts with well-defined active sites provide an ideal model platform for fundamental mechanism elucidation. More importantly, the intersite synergy between the active sites permits the enhanced reaction efficiency and selectivity toward target products. In this Review, we systematically assess the dominant reaction pathways of electrocatalytic C-N coupling reactions toward various products including urea, amines, amides, amino acids, and oximes. To guide the rational design of atomically dispersed catalysts, we identify four key stages in the overall reaction process and critically discuss the corresponding catalyst design principles, namely, retaining NOx/COx reactants on the catalyst surface, regulating the evolution pathway of N-/C- intermediates, promoting C-N coupling, and facilitating final hydrogenation steps. In addition, the advanced and effective theoretical simulation and characterization technologies are discussed. Finally, a series of remaining challenges and valuable future prospects are presented to advance rational catalyst design toward selective electrocatalytic synthesis of organonitrogen molecules.

Complete dehalogenation of chloramphenicol by bimetallic alloy Pd-Au nanoparticles in a H2-Based membrane Catalyst-Film reactor

An effective treatment method to achieve complete dehalogenation of halogenated antibiotics is an urgent affair, because partially dehalogenated products remain persistent pollutants and sometimes having higher toxicity than the original antibiotics. This study is the first to achieve complete reductive dechlorination of chloramphenicol (CAP) using bimetallic alloy Pd-Au nanoparticles (Pd-AuNPs) in a hydrogen (H2)-based membrane catalyst-film reactor (H2-MCfR). Compared to mono-Pd nanoparticles (PdNPs), bimetallic alloy Pd-AuNPs gave faster removal and more complete dechlorination of CAP in batch and continuous-flow experiments. Notably, complete CAP dechlorination was achieved with a catalyst film of Pd-AuNPs (mole ratio 1:1) that had negligible catalyst loss in a 20-day continuous operation. LC-MS identified the products of reductive dechlorination, and the dominant pathways differed significantly between PdNPs and Pd-AuNPs. In particular, Pd-AuNPs favored reductive dechlorination, while PdNPs favored reduction of the –NO2 group, which led to partially dechlorinated products that were stable. Density functional theory (DFT) calculations showed how the Au atoms reduced the adsorption energy of reactants, which affected reaction selectivity. Toxicity prediction model confirmed that reducing dechlorination significantly decreased acute toxicity to fish, daphnia and green algae. Thus, the MCfR with Pd-AuNP catalysts offers promise for achieving complete dechlorination of CAP and inspires further studies for other halogenated antibiotics.

Formation of acetonitrile and ethylene from activation of ethane over cobalt-exchanged aluminosilicates: Active sites and reaction pathways

Cobalt-exchanged ZSM-5 catalyzes the ammoxidation of ethane (2 C2H6 + 3 O2 + 2 NH3 → 2 CH3CN + 6 H2O), yet the active form of cobalt, the role of the Brønsted acidic zeolite, and the reaction pathways remain elusive. Comparisons of rates and selectivities of reactions at distinctive cobalt sites (Co2+ at Al pair sites (CoZ2), Co3O4, cobalt phyllosilicate, and cobalt aluminate) suggest sites that form from CoZ2 provide the greatest rates and selectivities for CH3CN and C2H4 formation. Significantly, we revealed a large fraction of CH3CN appears to form directly through a trimolecular reaction at cobalt ions without desorption of intermediates. In parallel, a more conventional sequential pathway dehydrogenates C2H6, aminates C2H4, and oxidatively dehydrogenates C2H5NH2 to produce CH3CN. Combined rate measurements with temperature programmed reactions and in situ infrared spectra demonstrate that O2-derived intermediates at cobalt ions initiate both reaction sequences by abstracting H-atom from C2H6.

Selective Oxidation of Benzo[d]isothiazol-3(2H)-Ones Enabled by Selectfluor.

A metal-free and Selectfluor-mediated selective oxidation reaction of benzo[d]isothiazol-3(2H)-ones in aqueous media is presented. This novel strategy provides a facile, green, and efficient approach to access important benzo[d]isothiazol-3(2H)-one-1-oxides with excellent yields and high tolerance to various functional groups. Furthermore, the purification of benzoisothiazol-3-one-1-oxides does not rely on column chromatography. Moreover, the preparation of saccharine derivatives has been achieved through sequential, double oxidation reactions in a one-pot aqueous media.

Preparation of high-strength silicon carbide by SLS-RS

One major limitation of selective laser sintering (SLS) plus reaction sintering (RS) SiC ceramics was the poor mechanical properties related to those of the traditional reaction sintered SiC due to the excess residual Si and C. TiC as a new carbon source in SLS was explored in this work to improve the performance of sintered SiC. It's found that TiC could react with liquid Si and form liquid TiSi2 during the processing, and then reduce the residual Si from 26.41 vol% to 0.53 vol% in the final products. As the content of TiC increased, the flexural strength of the sintered sample increased from 274.3 MPa to 434.6 MPa. The maximum value was reached when the TiC content was 25 wt%. Continuing to add TiC would generate more TiSi2, and the flexural strength of the sintered sample would decrease.