Selection Of Aptamers Research Articles

Co-transcriptional production of programmable RNA condensates and synthetic organelles.

Condensation of RNA and proteins is central to cellular functions, and the ability to program it would be valuable in synthetic biology and synthetic cell science. Here we introduce a modular platform for engineering synthetic RNA condensates from tailor-made, branched RNA nanostructures that fold and assemble co-transcriptionally. Up to three orthogonal condensates can form simultaneously and selectively accumulate fluorophores through embedded fluorescent light-up aptamers. The RNA condensates can be expressed within synthetic cells to produce membrane-less organelles with a controlled number and relative size, and showing the ability to capture proteins using selective protein-binding aptamers. The affinity between otherwise orthogonal nanostructures can be modulated by introducing dedicated linker constructs, enabling the production of bi-phasic RNA condensates with a prescribed degree of interphase mixing and diverse morphologies. The in situ expression of programmable RNA condensates could underpin the spatial organization of functionalities in both biological and synthetic cells.

Rapid Nuclease-Assisted Selection of High-Affinity Small-Molecule Aptamers.

Aptamers are nucleic acid bioreceptors that have been widely utilized for a variety of biosensing applications, including in vivo detection methods that would not be possible with antibody-based systems. However, it remains challenging to generate high-quality aptamers for small molecule targets, particularly for use under physiological conditions. We present a highly effective aptamer selection technology for small-molecule targets that utilizes the nuclease EcoRI to remove nonspecific or weakly binding sequences in solution phase, rapidly enriching high-affinity target binders within just a few rounds of selection. As proof-of-concept, we used our nuclease-assisted SELEX (NA-SELEX) method to isolate aptamers for a synthetic cannabinoid, AB-FUBINACA. Within five rounds, we identified two highly specific aptamers that exhibit nanomolar affinity at physiological temperature. We also demonstrate the robustness and reproducibility of NA-SELEX by performing the same selection experiment with fresh reagents and libraries, obtaining the same two aptamers as well as two other high-quality aptamer candidates. Finally, we compare NA-SELEX against a conventional library-immobilized SELEX screen for AB-FUBINACA using the same screening conditions, identifying aptamers with 25-100-fold weaker affinity after 11 rounds of selection. NA-SELEX therefore could be an effective selection method for the isolation of high-quality aptamers for small-molecule targets.

Aptamer Screening: Current Methods and Future Trend towards Non-SELEX Approach.

Aptamers are nucleic acid sequences that specifically bind with target molecules and are vital to applications such as biosensing, drug development, disease diagnostics, etc. The traditional selection procedure of aptamers is based on the Systematic Evolution of Ligands by an Exponential Enrichment (SELEX) process, which relies on repeating cycles of screening and amplification. With the rapid development of aptamer applications, RNA and XNA aptamers draw more attention than before. But their selection is troublesome due to the necessary reverse transcription and transcription process (RNA) or low efficiency and accuracy of enzymes for amplification (XNA). In light of this, we review the recent advances in aptamer selection methods and give an outlook on future development in a non-SELEX approach, which simplifies the procedure and reduces the experimental costs. We first provide an overview of the traditional SELEX methods mostly designed for screening DNA aptamers to introduce the common tools and methods. Then a section on the current screening methods for RNA and XNA is prepared to demonstrate the efforts put into screening these aptamers and the current difficulties. We further predict that the future trend of aptamer selection lies in non-SELEX methods that do not require nucleic acid amplification. We divide non-SELEX methods into an immobilized format and non-immobilized format and discuss how high-resolution partitioning methods could facilitate the further improvement of selection efficiency and accuracy.

Aptamer Based on Silver Nanoparticle-Modified Flexible Carbon Ink Printed Electrode for the Electrochemical Detection of Chikungunya Virus.

Medical devices have progressed from their initial bulky forms to smart devices. However, their rigidity hampers their seamless integration into everyday life. The fields of stretchable, textile, and flexible electronics are emerging research areas with the potential to drive significant technological progress. This research presents a laboratory-based technique to produce highly sensitive and flexible biosensors for detecting the chikungunya virus. These biosensors are based on 0D nanomaterials and demonstrate significant advancements in voltammetry. The electrochemical platform was created utilizing the stencil printing (StPE) technique. Adapting the biosensor setup involved the selection of aptamer as the biorecognition element bound with silver nanoparticles (AgNPs). This biosensor was employed in the voltammetric identification of the Chikungunya virus antigen (CHIKV-Ag) within a solution containing 0.5 mM potassium ferro/ferri cyanide, a redox pair. The biosensor was employed to evaluate CHIKV-Ag within a human serum sample. It demonstrated a linear detection span ranging from 0.1 ng/mL to 1 μg/mL, with a detection limit of 0.1 ng/mL for CHIKV-Ag. The proposed approach, due to its flexibility in production and the electrocatalytic attributes displayed by the zero-dimensional nanostructure, presents innovative opportunities for cost-effective and tailored aptamer-based bioelectronics, thereby broadening the scope of this domain.

Selection of DNA aptamer for label-free electrochemical aptasensor for the detection of rubella virus

The Rubella virus (RUBV) is a highly contagious pathogen classified within the rubivirus genus, primarily infecting humans and transmitted via airborne routes. RUBV infection generally manifests as a mild illness reminiscent of measles. However, when affecting pregnant women, it can lead to a severe condition known as congenital rubella syndrome (CRS). Rubella infection could be also associated with joint pain, arthritis, and neurological disorders. Determination of Rubella immunity and diagnosis conventionally involve the Hemagglutination Inhibition (HI) test or the Enzyme-Linked Immunosorbent Assay (ELISA). In this study, we describe the selection and characterization of specific aptamers targeting the Rubella virus by using the process of Systematic Evolution of Ligands by EXponantial enrichment (SELEX). The Binding affinity studies have shown that the two aptamers; R-7 and R-5 display the lowest dissociation constants (Kd) of 6.58 nM and 19.05 nM, respectively. Then, R-7 aptamer was modified with a thiol group to enable its immobilization on screen-printed gold electrodes for the Rubella virus aptasensing. The label-free electrochemical detection was achieved using square wave voltammetry (SWV). The designed aptasensor has shown an excellent performance in detecting the Rubella virus within the range of 0.0005 ng/ml to 1000 ng/ml antigen and a limit of detection (LOD) of 0.00015 ng/ml. Selectivity studies were also performed against other viral antigens and serum proteins. Finally, the biosensor applicability was successfully demonstrated in spiked serum samples.

Peptide-based CE-SELEX enables convenient isolation of aptamers specifically recognizing CD20-expressing cells

The CD20 antigen is a key target for several diseases including lymphoma and autoimmune diseases. For over 20 years, several monoclonal antibodies were developed to treat CD20-related disorders. As many therapeutic proteins, their clinical use is however limited due to their nature with a costly biotechnological procedure and side effects such as the production of anti-drug neutralizing antibodies. Nucleic acid aptamers have some advantages over mAbs and are currently investigated for clinical use. We herein report the selection of DNA aptamer by using a peptide-based CE-SELEX (Capillary Electrophoresis-Systematic Evolution of Ligands by Exponential Enrichment) method. It was demonstrated that these aptamers bind specifically a CD20-expressing human cell line, with Kd estimated from isothermal titration calorimetry experiments in the micromolar range. This study demonstrates that the CE-SELEX is suitable as alternative method to the conventional Cell-SELEX to discover new cell-targeting compounds.

The non-negligible non-specific adsorption of oligonucleotides in target-immobilized Mag-SELEX

Target-immobilized magnetic beads-based Systematic Evolution of Ligands by Exponential Enrichment (target-immobilized Mag-SELEX) has emerged as a powerful tool for aptamer selection owing to its convenience, efficiency, and versatility. However, in this study we systematically investigated non-specific adsorption in target-immobilized Mag-SELEX and found that the non-specific adsorption of the oligonucleotides to target-labeled magnetic beads was comparable to that of the screening libraries, indicating a substantial portion of captured sequences likely stem from non-specific adsorption. Longer nucleic acid sequences (80 nt and above, such as polyA80 and yeast tRNA) were found to attenuate this non-specific adsorption, with more complex higher-order structures demonstrating greater efficacy, while dNTP and short sequences such as primer sequences (20 nt), polyT(59), or polyA(59), did not possess this capability. Various evidence suggested that hydrophobic interactions and other weak interactions may be the primary underlying cause of non-specific adsorption. Additionally, surface modification of magnetic beads with polar molecule polyethylene glycol (PEG) also yielded a significant reduction in non-specific adsorption. In conclusion, our research underscores the critical importance of closely monitoring non-specific adsorption in target-immobilized Mag-SELEX.

Combination of Capture-SELEX and Post-SELEX for procymidone-specific aptamer selection and broad-specificity aptamer discovery, and development of aptamer-based lateral flow assay

BackgroundDue to its wide application, procymidone has become one of the pesticides with high detection rates in supervision and sampling. Therefore, it is necessary to establish a rapid and efficient method for the detection of procymidone. However, an important bottleneck restricting the development of rapid detection methods of procymidone is that its specific recognition elements are rarely reported. In this work, Capture-SELEX and post-SELEX were used in aptamer screening, and the obtained aptamers were used to construct an aptamer-based lateral flow assay (LFA). ResultsFirstly, a specific aptamer Seq15 was obtained for procymidone by Capture-SELEX, and its dissociation constant (Kd) was 24.22 nM. Secondly, post-SELEX was used to analyze and modify Seq15 to improve its performance, and the Kd of the truncated sequence Seq15-2 was 21.28 nM. In addition to this, the broad-specificity aptamer Seq17-1 was obtained via post-SELEX. Seq17-1 could broadly recognize dicarboximide fungicides (procymidone, iprodione, chlozolinate, dimethachlon and vinclozolin) and their metabolic derivative (3,5-dichloroaniline). Finally, the specific aptamer-based LFA of procymidone was constructed, and the limit of detection (LOD) was 0.79 ng/mL. Meanwhile, the LODs of dicarboximide fungicides and their metabolic derivative were 0.62, 0.64, 0.71, 0.69, 0.64 and 0.66 ng/mL, respectively. The above LFAs were highly specific and stable, and had been successfully used for the detection of vegetable samples. SignificanceUnder the combination of Capture-SELEX and Post-SELEX, this study not only provides specific recognition elements for rapid detection of procymidone, but also provides new ideas for the discovery of broad-specificity aptamers. Combining broad-specificity primary detection and single-specificity quantification, a composite aptamer-based LFA detection platform has been developed, which significantly improves detection efficiency.

New Insights into Aptamers: An Alternative to Antibodies in the Detection of Molecular Biomarkers.

Aptamers are short oligonucleotides with single-stranded regions or peptides that recently started to transform the field of diagnostics. Their unique ability to bind to specific target molecules with high affinity and specificity is at least comparable to many traditional biorecognition elements. Aptamers are synthetically produced, with a compact size that facilitates deeper tissue penetration and improved cellular targeting. Furthermore, they can be easily modified with various labels or functional groups, tailoring them for diverse applications. Even more uniquely, aptamers can be regenerated after use, making aptasensors a cost-effective and sustainable alternative compared to disposable biosensors. This review delves into the inherent properties of aptamers that make them advantageous in established diagnostic methods. Furthermore, we will examine some of the limitations of aptamers, such as the need to engage in bioinformatics procedures in order to understand the relationship between the structure of the aptamer and its binding abilities. The objective is to develop a targeted design for specific targets. We analyse the process of aptamer selection and design by exploring the current landscape of aptamer utilisation across various industries. Here, we illuminate the potential advantages and applications of aptamers in a range of diagnostic techniques, with a specific focus on quartz crystal microbalance (QCM) aptasensors and their integration into the well-established ELISA method. This review serves as a comprehensive resource, summarising the latest knowledge and applications of aptamers, particularly highlighting their potential to revolutionise diagnostic approaches.

Selection of DNA aptamers that prevent the fibrillization of α-synuclein protein in cellular and mouse models

A neuropathological hallmark of Parkinson's Disease (PD) is the aggregation and spreading of misfolded α-synuclein (αSyn) protein. In this study, a selection method was developed to identify aptamers that showed affinity for monomeric αSyn and inhibition of αSyn aggregation. Aptamer a-syn-1 exhibited strong inhibition of αSyn aggregation in vitro by transmission electron microscopy and thioflavin T fluorescence. A-syn-1-treated SH-SY5Y cells incubated with pre-formed fibrils (PFFs) showed less intracellular aggregation of αSyn in comparison to a scrambled oligonucleotide control, as observed with fluorescent microscopy. Systemic delivery of a-syn-1 to the brain was achieved using a liposome vehicle and confirmed with fluorescence microscopy and qPCR. Transgenic mice overexpressing the human A53T variant of αSyn protein were injected with a-syn-1 loaded liposomes at 5 months of age both acutely (single i.p injection) and repeatedly (5 i.p. injections over 5 days). Western blot protein quantification revealed that both acute and repeated injections of a-syn-1 decreased levels of the aggregated form of αSyn in the transgenic mice in the prefrontal cortex, caudate, and substania nigra (SNc). These results provide in vitro and in vivo evidence that a-syn-1 can inhibit pathological αSyn aggregation and may have implications in treatment strategies to target dysregulation in PD.

Nuclease-assisted selection of slow-off rate aptamers.

Conventional directed evolution methods offer the ability to select bioreceptors with high binding affinity for a specific target in terms of thermodynamic properties. However, there is a lack of analogous approaches for kinetic selection, which could yield affinity reagents that exhibit slow off-rates and thus remain tightly bound to targets for extended periods. Here, we describe an in vitro directed evolution methodology that uses the nuclease flap endonuclease 1 to achieve the efficient discovery of aptamers that have slow dissociation rates. Our nuclease-assisted selection strategy can yield specific aptamers for both small molecules and proteins with off-rates that are an order of magnitude slower relative to those obtained with conventional selection methods while still retaining excellent overall target affinity in terms of thermodynamics. This new methodology provides a generalizable approach for generating slow off-rate aptamers for diverse targets, which could, in turn, prove valuable for applications including molecular devices, bioimaging, and therapy.

Selection of structure-induced aptamer targeting small molecule based on capillary sieving electrophoresis.

In this study, a structure-induced aptamer targeting small molecules was selected using capillary sieving electrophoresis (CSE). CSE was conducted using a capillary filled with a background solution containing hydroxypropyl cellulose as a sieving matrix to separate the aptamer candidates by changing their structures via complexation. Before aptamer selection, the original random-sequence DNA library was used to create structure-not-preorganized DNA sub-library containing straight-chain-like structures using CSE. Next, a structure-induced aptamer targeting L-tyrosinamide was selected from the prepared sub-library. Six aptamer candidates were selected, one of which showed a binding ability comparable to that of the reported L-tyrosinamide aptamer and selectivity toward the analogs. These results indicated that the proposed method can be applied to select structure-induced aptamers that target small molecules.

Computational Frontiers in Aptamer-Based Nanomedicine for Precision Therapeutics: A Comprehensive Review.

In the rapidly evolving landscape of nanomedicine, aptamers have emerged as powerful molecular tools, demonstrating immense potential in targeted therapeutics, diagnostics, and drug delivery systems. This paper explores the computational features of aptamers in nanomedicine, highlighting their advantages over antibodies, including selectivity, low immunogenicity, and a simple production process. A comprehensive overview of the aptamer development process, specifically the Systematic Evolution of Ligands by Exponential Enrichment (SELEX) process, sheds light on the intricate methodologies behind aptamer selection. The historical evolution of aptamers and their diverse applications in nanomedicine are discussed, emphasizing their pivotal role in targeted drug delivery, precision medicine and therapeutics. Furthermore, we explore the integration of artificial intelligence (AI), machine learning (ML), Internet of Things (IoT), Internet of Medical Things (IoMT), and nanotechnology in aptameric development, illustrating how these cutting-edge technologies are revolutionizing the selection and optimization of aptamers for tailored biomedical applications. This paper also discusses challenges in computational methods for advancing aptamers, including reliable prediction models, extensive data analysis, and multiomics data incorporation. It also addresses ethical concerns and restrictions related to AI and IoT use in aptamer research. The paper examines progress in computer simulations for nanomedicine. By elucidating the importance of aptamers, understanding their superiority over antibodies, and exploring the historical context and challenges, this review serves as a valuable resource for researchers and practitioners aiming to harness the full potential of aptamers in the rapidly evolving field of nanomedicine.

Development of ultra-sensitive and label-free ellipsometric aptasensor for the detection of residual fipronil

Fipronil, an insecticide widely employed, poses risks to both the environment and human health. Existing detection methods for fipronil and its metabolites, such as GC–MS, are known; however, these methods are laborious and time-intensive. In this investigation, our aim was to devise a label-free aptasensor strategy for detecting fipronil in food-related scenarios. To achieve this objective, we developed ellipsometric-based aptasensors specifically tailored for fipronil detection. The advantage of ellipsometric sensors lies in their efficacy in analyzing thin and uniform films. Spectrophotometric ellipsometry (SE), utilized in this realm, is preferred due to its sensitivity to molecular accumulation at the substrate surface, as evidenced by the phase shift (Δ). The limit of detection (LOD) observed in the buffer solution for the two aptamers, Anti-FIP1 and Anti-FIP2, used in this study, with lengths of 80 and 73 bases respectively, showed promising results. Additionally, the specificity of these aptamers against bovine serum albumin and ethiprole in the SE sensor approached the reproducibility limit. This is attributed to the wide-ranging cocktail employed during the aptamer selection process. The LOD for Anti-FIP1 was 0.034 nM (33.7 pM), while for Anti-FIP2 it was 0.025 nM (24.9 pM). The limit of quantification (LOQ) was calculated as 0.1 nM (0.044 ng/mL) for Anti-FIP1 and 0.075 nM (0.033 ng/mL) for Anti-FIP2. Utilizing the spike method for fipronil detection by introducing egg and grain samples, the deviation observed was less than ±10 % for recovery. This study presents a dependable aptasensor platform for the testing of fipronil in food samples, employing aptamer-based SE.

Investigation of the Affinity of Aptamers for Bacteria by Surface Plasmon Resonance Imaging Using Nanosomes.

The cell-SELEX method enables efficient selection of aptamers that bind whole bacterial cells. However, after selection, it is difficult to determine their binding affinities using common screening methods because of the large size of the bacteria. Here we propose a simple surface plasmon resonance imaging method (SPRi) for aptamer characterization using bacterial membrane vesicles, called nanosomes, instead of whole cells. Nanosomes were obtained from membrane fragments after mechanical cell disruption in order to preserve the external surface epitopes of the bacterium used for their production. The study was conducted on Bacillus cereus (B. cereus), a Gram-positive bacterium commonly found in soil, rice, vegetables, and dairy products. Four aptamers and one negative control were initially grafted onto a biochip. The binding of B. cereus cells and nanosomes to immobilized aptamers was then compared. The use of nanosomes instead of cells provided a 30-fold amplification of the SPRi signal, thus allowing the selection of aptamers with higher affinities. Aptamer SP15 was found to be the most sensitive and selective for B. cereus ATCC14579 nanosomes. It was then truncated into three new sequences (SP15M, SP15S1, and SP15S2) to reduce its size while preserving the binding site. Fitting the results of the SPRi signal for B. cereus nanosomes showed a similar trend for SP15 and SP15M, and a slightly higher apparent association rate constant kon for SP15S2, which is the truncation with a high probability of a G-quadruplex structure. These observations were confirmed on nanosomes from B. cereus ATCC14579 grown in milk and from the clinical strain B. cereus J066. The developed method was validated using fluorescence microscopy on whole B. cereus cells and the SP15M aptamer labeled with a rhodamine. This study showed that nanosomes can successfully mimic the bacterial membrane with great potential for facilitating the screening of specific ligands for bacteria.

Selection of a new aptamer targeting amoxicillin for utilization in a label-free electrochemical biosensor

Pharmaceutical pollution has received considerable attention because of the harmful effects of pharmaceutical compounds on human health, even in trace amounts. Amoxicillin is one of the frequently used antibiotics that was included in the list of emerging water pollutants. Therefore, a highly selective and rapid technique for amoxicillin detection is required. In this work, a new aptamer was selected for amoxicillin and utilized for the development of a label-free electrochemical aptasensor. Aptamer selection was performed using the systematic evolution of ligands by exponential enrichment. The selected aptamer showed good specificity against other antibiotics, including the structurally related antibiotics: ampicillin and ciprofloxacin. Among the selected aptamers, Amx3 exhibited the lowest dissociation constant value of 112.9 nM. An aptasensor was developed by immobilization of thiolated Amx3 aptamer onto gold screen–printed electrodes via self-assembly, which was characterized using cyclic voltammetry and electrochemical impedance spectroscopy. The detection was realized by monitoring the change in the differential pulse voltammetry peak current in the ferro/ferricyanide redox couple upon binding of the aptasensor to amoxicillin. The aptasensor showed very good sensitivity with an ultralow limit of detection of 0.097 nM. When the aptasensor was tested using actual spiked milk samples, excellent recovery percentages were observed. The label-free electrochemical aptasensor developed herein is a promising tool for the selective and sensitive detection of amoxicillin in environmental samples.

In vitro identification of single-stranded DNA aptamers targeting human IL-23 using the protein-SELEX strategy

Interleukin (IL)-23 inhibitor monoclonal antibodies shown significant efficacy in treating autoimmune diseases. DNA or RNA aptamers exhibit comparable specificity to antibodies, are cost-effective, non-immunogenic, and do not have batch to batch variation. This study aimed to characterize a single-stranded DNA (ssDNA) aptamer targeting human IL-23. The alpha subunit of IL-23 (P19) and intact IL-23 were cloned, expressed, and the proteins finally were purified through Ni2+-iminodiacetic acid affinity chromatography. The selection and characterization of ssDNA aptamer against P19 were conducted using the protein-systematic evolution of ligands by exponential enrichment (SELEX). Dot blot assay was carried out to monitor binding of the aptamer output of SELEX rounds, to P19 protein. The dissociation constant (Kd) of aptamers with positive results in dot blot assay, determined based on their binding to IL-23 using an ELISA method. Recombinant P19 and IL-23 proteins were 26 and 72 kDa, respectively, observed on SDS-PAGE .12 %. The aptamers output from 7, 8, 9, 10, 11, and 12 rounds of the SELEX was monitored by dot blot assay, revealing that the aptamer from the round 8 has stronger luminescent signal and was selected for TA-cloning. After analyzing the biotinylated aptamers from clones, positive clones in dot blot assay and ELISA were sequenced. Finally, the Kd calculation revealed three aptamers with high affinity, named A23P3, A23P6, and A23P15 with Kd values of 1.37, 2.139, and 2.88 nM, respectively. Results of this study introduced three specific anti-IL-23 ssDNA aptamers with high affinity, which could be utilized for therapeutic and diagnostic purposes.

In vitro selection of DNA aptamers against staphylococcal enterotoxin A

Staphylococcal enterotoxin A (SEA) is the most frequently reported in staphylococcal food poisoning (SFP) outbreaks. Aptamers are single-stranded nucleic acids that are seen as promising alternatives to antibodies in several areas, including diagnostics. In this work, systematic evolution of ligands by exponential enrichment (SELEX) was used to select DNA aptamers against SEA. The SELEX protocol employed magnetic beads as an immobilization matrix for the target molecule and real-time quantitative PCR (qPCR) for monitoring and optimizing sequence enrichment. After 10 selection cycles, the ssDNA pool with the highest affinity was sequenced by next generation sequencing (NGS). Approximately 3 million aptamer candidates were identified, and the most representative cluster sequences were selected for further characterization. The aptamer with the highest affinity showed an experimental dissociation constant (KD) of 13.36 ± 18.62 nM. Increased temperature negatively affected the affinity of the aptamer for the target. Application of the selected aptamers in a lateral flow assay demonstrated their functionality in detecting samples containing 100 ng SEA, the minimum amount capable of causing food poisoning. Overall, the applicability of DNA aptamers in SEA recognition was demonstrated and characterized under different conditions, paving the way for the development of diagnostic tools.

Selection and characterization of aptamers targeting the Vif-CBFβ-ELOB-ELOC-CUL5 complex.

The viral infectivity factor (Vif) of human immunodeficiency virus 1 forms a complex with host proteins, designated as Vif-CBFβ-ELOB-ELOC-CUL5 (VβBCC), initiating the ubiquitination and subsequent proteasomal degradation of the human antiviral protein APOBEC3G (A3G), thereby negating its antiviral function. Whilst recent cryo-electron microscopy (cryo-EM) studies have implicated RNA molecules in the Vif-A3G interaction that leads to A3G ubiquitination, our findings indicated that the VβBCC complex can also directly impede A3G-mediated DNA deamination, bypassing the proteasomal degradation pathway. Employing the Systematic Evolution of Ligands by EXponential enrichment (SELEX) method, we have identified RNA aptamers with high affinity for the VβBCC complex. These aptamers not only bind to the VβBCC complex but also reinstate A3G's DNA deamination activity by inhibiting the complex's function. Moreover, we delineated the sequences and secondary structures of these aptamers, providing insights into the mechanistic aspects of A3G inhibition by the VβBCC complex. Analysis using selected aptamers will enhance our understanding of the inhibition of A3G by the VβBCC complex, offering potential avenues for therapeutic intervention.

A Multi-Faceted Binding Assessment of Aptamers Targeting the SARS-CoV-2 Spike Protein.

The COVID-19 pandemic has underscored the critical need for the advancement of diagnostic and therapeutic platforms. These platforms rely on the rapid development of molecular binders that should facilitate surveillance and swift intervention against viral infections. In this study, we have evaluated by three independent research groups the binding characteristics of various published RNA and DNA aptamers targeting the spike protein of the SARS-CoV-2 virus. For this comparative analysis, we have employed different techniques such as biolayer interferometry (BLI), enzyme-linked oligonucleotide assay (ELONA), and flow cytometry. Our data show discrepancies in the reported specificity and affinity among several of the published aptamers and underline the importance of standardized methods, the impact of biophysical techniques, and the controls used for aptamer characterization. We expect our results to contribute to the selection and application of suitable aptamers for the detection of SARS-CoV-2.