Secondary Structure In Solution Research Articles

Three intrinsically unstructured mussel adhesive proteins, mfp‐1, mfp‐2, and mfp‐3: Analysis by circular dichroism

Mussel foot proteins (mfps) mediate fouling by the byssal holdfast and have been extensively investigated as models for versatile polymer-mediated underwater adhesion and coatings. However, insights into the structural properties of mfps have lagged far behind the nanomechanical advances, owing in part to the inability of these proteins to crystallize as well as their limited solubility. Here, solution secondary structures of mfp-1, mfp-2, and mfp-3, localized in the mussel byssal cuticle, adhesive plaque, and plaque-substratum interface, respectively, were investigated using circular dichroism. All three have significant extended coil solution structure, but two, mfp-1 and mfp-2, appear to have punctuated regions of structure separated by unstructured domains. Apart from its punctuated distribution, the structure in mfp-1 resembles other structural proteins such as collagen and plant cell-wall proteins with prominent polyproline II helical structure. As in collagen, PP II structure of mfp-1 is incrementally disrupted by increasing the temperature and by raising pH. However, no recognizable change in mfp-1's PP II structure was evident with the addition with Ca²⁺ and Fe³⁺. In contrast, mfp-2 exhibits Ca²⁺- and disulfide-stabilized epidermal growth factor-like domains separated by unstructured sequence. Mfp-2 showed calcium-binding ability. Bound calcium in mfp-2 was not removed by chelation at pH 5.5, but it was released upon reduction of disulfide bonds. Mfp-3, in contrast, appears to consist largely of unstructured extended coils.

Pentacycloundecane‐diol‐Based HIV‐1 Protease Inhibitors: Biological Screening, 2D NMR, and Molecular Simulation Studies

Novel compounds incorporating a pentacycloundecane (PCU) diol moiety were designed, synthesized, and evaluated as inhibitors of the wild-type C-South African (C-SA) HIV-1 protease. Seven compounds are reported herein, three of which displayed IC(50) values in the 0.5-0.6 μM range. The cytotoxicity of PCU cage peptides toward human MT-4 cells appears to be several orders of magnitude less toxic than the current antiviral medications ritonavir and lopinavir. NMR studies based on the observed through-space (1)H,(1)H distances/contacts in the EASY-ROESY spectra of three of the considered PCU peptide inhibitors enabled us to describe their secondary solution structure. Conserved hydrogen bonding interactions were observed between the hydroxy group of the PCU diol inhibitors and the catalytic triad (Asp25, Ile26, Gly27) of HIV protease in docking and molecular dynamics simulations. The biological significance and possible mode of inhibition by PCU-based HIV protease inhibitors discussed herein facilitates a deeper understanding of this family of inhibitors and their potential application to a vast number of alternative diseases related to proteases.

Effect of Gold Nanoparticle Conjugation on Peptide Dynamics and Structure

Molecular dynamics simulations were used to characterize the structure and dynamics for several peptides and the effect of conjugating them to a gold nanoparticle. Peptide structure and dynamics were compared for two cases: unbound peptides in water, and peptides bound to the gold nanoparticle surface in water. The results show that conjugating the peptides to the gold nanoparticle usually decreases conformational entropy, but sometimes increases entropy. Conjugating the peptides can also result in more extended structures or more compact structures depending on the amino acid sequence of the peptide. The results also suggest that if one wishes to use peptide-nanoparticle conjugates for drug delivery it is important that the peptides contain secondary structure in solution because in our simulations the peptides with little to no secondary structure adsorbed to the nanoparticle surface.

Synthesis and Structural Characterization of Homochiral Homo‐Oligomers of cis‐γ‐Methoxy‐Substituted cis‐ and trans‐Furanoid‐β‐Amino Acids

AbstractHerein we describe the synthesis of cis‐/trans‐3‐aminotetrahydrofuran‐2‐carboxylic acids (cis‐/trans‐FAA) having a γ‐methoxy group cis to the amine. The homo‐oligomers of these two diastereomeric FAAs have been prepared. Preliminary investigation of their solution secondary structures revealed that they are the same as the homo‐oligomers of the parent cis‐/trans‐FAA with the methoxy group only being a spectator substituent.

Solution NMR of a 463-Residue Phosphohexomutase: Domain 4 Mobility, Substates, and Phosphoryl Transfer Defect

Phosphomannomutase/phosphoglucomutase contributes to the infectivity of Pseudomonas aeruginosa, retains and reorients its intermediate by 180°, and rotates domain 4 to close the deep catalytic cleft. Nuclear magnetic resonance (NMR) spectra of the backbone of wild-type and S108C-inactivated enzymes were assigned to at least 90%. (13)C secondary chemical shifts report excellent agreement of solution and crystallographic structure over the 14 α-helices, C-capping motifs, and 20 of the 22 β-strands. Major and minor NMR peaks implicate substates affecting 28% of assigned residues. These can be attributed to the phosphorylation state and possibly to conformational interconversions. The S108C substitution of the phosphoryl donor and acceptor slowed transformation of the glucose 1-phosphate substrate by impairing k(cat). Addition of the glucose 1,6-bisphosphate intermediate accelerated this reaction by 2-3 orders of magnitude, somewhat bypassing the defect and apparently relieving substrate inhibition. The S108C mutation perturbs the NMR spectra and electron density map around the catalytic cleft while preserving the secondary structure in solution. Diminished peak heights and faster (15)N relaxation suggest line broadening and millisecond fluctuations within four loops that can contact phosphosugars. (15)N NMR relaxation and peak heights suggest that domain 4 reorients slightly faster in solution than domains 1-3, and with a different principal axis of diffusion. This adds to the crystallographic evidence of domain 4 rotations in the enzyme, which were previously suggested to couple to reorientation of the intermediate, substrate binding, and product release.

Coherent two-dimensional infrared spectroscopy: Quantitative analysis of protein secondary structure in solution

We present a method to quantitatively determine the secondary structure composition of globular proteins using coherent two-dimensional infrared (2DIR) spectroscopy of backbone amide I vibrations (1550-1720 cm(-1)). Sixteen proteins with known crystal structures were used to construct a library of 2DIR spectra, and the fraction of residues in α-helix, β-sheet, and unassigned conformations was determined by singular value decomposition (SVD) of the measured two-dimensional spectra. The method was benchmarked by removing each individual protein from the set and comparing the composition extracted from 2DIR against the composition determined from the crystal structures. To highlight the increased structural content extracted from 2DIR spectra a similar analysis was also carried out using conventional infrared absorption of the proteins in the library.

Use of a Chondroitin Sulfate Isomer as an Effective and Removable Dispersant of Single‐Walled Carbon Nanotubes

Three isomers of chondroitin sulfate (CS), i.e., CS-A, CS-B, and CS-C, are investigated as nanotube dispersants and are found to have vastly different abilities to disperse single-walled carbon nanotubes (SWNTs) in water due to their different intramolecular interactions. Only CS-A and CS-C effectively disperse SWNTs into small bundles or individual tubes while CS-B disperses SWNTs poorly. Computer simulation and circular dichrosim show that neat CS-A and CS-C have weak intramolecular hydrogen bonding and extended conformations in solution resulting in energetically more favorable interactions with nanotubes. CS-B has relatively strong intramolecular Coulombic interaction and more alpha-helical secondary structure in solution resulting in energetically less favorable interaction with the nanotubes. Atomic force microscopy images show helical wrappings of CS-A and CS-C around the SWNTs. Transmission electron microscopy corroborates the helical wrapping of CS-A. Different isomeric forms of a polymer can have vastly different dispersing power because of their different intramolecular interactions and conformations. The easy removability of CS-A from nanotubes is confirmed with X-ray photoelectron spectroscopy showing almost no detectable sulphur content after washing with water and by application of washed CS-A dispersed SWNTs in field-effect transistors.

Genome-Wide Double-Stranded RNA Sequencing Reveals the Functional Significance of Base-Paired RNAs in Arabidopsis

The functional structure of all biologically active molecules is dependent on intra- and inter-molecular interactions. This is especially evident for RNA molecules whose functionality, maturation, and regulation require formation of correct secondary structure through encoded base-pairing interactions. Unfortunately, intra- and inter-molecular base-pairing information is lacking for most RNAs. Here, we marry classical nuclease-based structure mapping techniques with high-throughput sequencing technology to interrogate all base-paired RNA in Arabidopsis thaliana and identify ∼200 new small (sm)RNA–producing substrates of RNA–DEPENDENT RNA POLYMERASE6. Our comprehensive analysis of paired RNAs reveals conserved functionality within introns and both 5′ and 3′ untranslated regions (UTRs) of mRNAs, as well as a novel population of functional RNAs, many of which are the precursors of smRNAs. Finally, we identify intra-molecular base-pairing interactions to produce a genome-wide collection of RNA secondary structure models. Although our methodology reveals the pairing status of RNA molecules in the absence of cellular proteins, previous studies have demonstrated that structural information obtained for RNAs in solution accurately reflects their structure in ribonucleoprotein complexes. Furthermore, our identification of RNA–DEPENDENT RNA POLYMERASE6 substrates and conserved functional RNA domains within introns and both 5′ and 3′ untranslated regions (UTRs) of mRNAs using this approach strongly suggests that RNA molecules are correctly folded into their secondary structure in solution. Overall, our findings highlight the importance of base-paired RNAs in eukaryotes and present an approach that should be widely applicable for the analysis of this key structural feature of RNA.

Molecular Design of Functionalized m-Poly(phenylene ethynylene) Foldamers: from Simulation to Synthesis

m-Poly(phenylene ethynylene)s (mPPEs) are a class of synthetic molecules being used for biocide coatings, catalysis, as well as chemical and biomolecule sensing because they exhibit a propensity to form a helical secondary structure in solution. Additionally, the folding of mPPEs into such helical arrangements may generally be controlled by varying the primary structure of the mPPE and/or the nature of the solvent. As such, several attempts have been made at developing heuristics for predicting a priori whether a particular mPPE will fold into a helix in a given solvent based on energetic and structural considerations. However, the experimental evidence shows that the formation of helical structures by mPPEs cannot be reliably predicted using such simple models. In this work, we demonstrate that replica-exchange molecular dynamics (REMD) simulations provide excellent agreement with experimental observations. We have simulated 20 different mPPE variations in five different solvent environments. Experimental results are available for eight of these one hundred systems, and in all eight of these cases the REMD results were in agreement with the experiments. Additionally, we simulated and then synthesized two previously unreported mPPEs having both ester and nitrile functional groups. After studying their folding behaviors in chloroform and acetonitrile, it was found that experimental results were in agreement with our predictions. This illustrates how REMD simulations, which are easily carried out with publicly available software on most modern computing systems, can be used to guide synthesis efforts focused on the formation of macromolecules with specific secondary structures.

The C-terminal α–α superhelix of Pat is required for mRNA decapping in metazoa

Pat proteins regulate the transition of mRNAs from a state that is translationally active to one that is repressed, committing targeted mRNAs to degradation. Pat proteins contain a conserved N-terminal sequence, a proline-rich region, a Mid domain and a C-terminal domain (Pat-C). We show that Pat-C is essential for the interaction with mRNA decapping factors (i.e. DCP2, EDC4 and LSm1–7), whereas the P-rich region and Mid domain have distinct functions in modulating these interactions. DCP2 and EDC4 binding is enhanced by the P-rich region and does not require LSm1–7. LSm1–7 binding is assisted by the Mid domain and is reduced by the P-rich region. Structural analysis revealed that Pat-C folds into an α–α superhelix, exposing conserved and basic residues on one side of the domain. This conserved and basic surface is required for RNA, DCP2, EDC4 and LSm1–7 binding. The multiplicity of interactions mediated by Pat-C suggests that certain of these interactions are mutually exclusive and, therefore, that Pat proteins switch decapping partners allowing transitions between sequential steps in the mRNA decapping pathway.

Helix Formation in Preorganized β/γ-Peptide Foldamers: Hydrogen-Bond Analogy to the α-Helix without α-Amino Acid Residues

We report the first high-resolution structural data for the beta/gamma-peptide 13-helix (i,i+3 C=O...H-N H-bonds), a secondary structure that is formed by oligomers with a 1:1 alternation of beta- and gamma-amino acid residues. Our characterization includes both crystallographic and 2D NMR data. Previous studies suggested that beta/gamma-peptides constructed from conformationally flexible residues adopt a different helical secondary structure in solution. Our design features preorganized beta- and gamma-residues, which strongly promote 13-helical folding by the 1:1 beta/gamma backbone.

X-ray crystallographic and NMR studies of pantothenate synthetase provide insights into the mechanism of homotropic inhibition by pantoate

The structural basis for the homotropic inhibition of pantothenate synthetase by the substrate pantoate was investigated by X-ray crystallography and high-resolution NMR spectroscopic methods. The tertiary structure of the dimeric N-terminal domain of Escherichia coli pantothenate synthetase, determined by X-ray crystallography to a resolution of 1.7 A, showed a second molecule of pantoate bound in the ATP-binding pocket. Pantoate binding to the ATP-binding site induced large changes in structure, mainly for backbone and side chain atoms of residues in the ATP binding HXGH(34-37) motif. Sequence-specific NMR resonance assignments and solution secondary structure of the dimeric N-terminal domain, obtained using samples enriched in (2)H, (13)C, and (15)N, indicated that the secondary structural elements were conserved in solution. Nitrogen-15 edited two-dimensional solution NMR chemical shift mapping experiments revealed that pantoate, at 10 mm, bound at these two independent sites. The solution NMR studies unambiguously demonstrated that ATP stoichiometrically displaced pantoate from the ATP-binding site. All NMR and X-ray studies were conducted at substrate concentrations used for enzymatic characterization of pantothenate synthetase from different sources [Jonczyk R & Genschel U (2006) J Biol Chem 281, 37435-37446]. As pantoate binding to its canonical site is structurally conserved, these results demonstrate that the observed homotropic effects of pantoate on pantothenate biosynthesis are caused by competitive binding of this substrate to the ATP-binding site. The results presented here have implications for the design and development of potential antibacterial and herbicidal agents.

Investigation of DNA Spectral Conformational Changes and Polymer Buffering Capacity in Relation to Transfection Efficiency of DNA/Polymer Complexes

The relation between transfection efficiency of DNA/polymer complexes and DNA conformational alterations is investigated. The buffering capacity of several synthetic polymers is also studied to relate their performance in transfection efficiency. The cationic polymer/DNA interaction was evaluated by measuring the alteration of DNA secondary structures in solution before and after the addition of polymer with ATR-FTIR technique. The degree of protonation in aqueous cationic polymers is varied upon pH and different structures. A polymer capable of protonation acts like a proton sponge to react with H+ in titration with HCl. This characteristic was evaluated in relation to transfection efficiency because the capacity would help the release of endocytotic DNA from endosome/lysosome on its way to expression. IR results show that the antisymmetric PO2- vibration of DNA (at 1224 cm-1) shifts toward lower frequencies in complexation with PEI or PLLys (these polymers are able to transfect DNA). By contrast, the antisymmetric PO2- vibration of DNA in presence of PDAMA or dextran (these polymers are poor in DNA transfection) shows a shifting to higher frequencies or no alteration was observed. Interestingly, the polymers with best performance in transfection efficiency are in this order: PEI>PDMAEMA>PLLys>PDAMA>dextran which is in the same order as their polymer buffering capacity. These facts indicate polymers possessing better buffering capacity could result in higher transfection efficiency. Also, we have demonstrated in this paper that the alteration in the antisymmetric PO(2)(-) stretching vibration in the IR spectra is sensitive to the binding of cationic polymers with DNA and the transfection efficiency of the formed complexes. These findings are useful for the developing polymer-based gene delivery systems with better in vitro and in vivo performance. NOVELTY OF THE WORK: this work establishes a rational relation between transfection efficiency of DNA/polymer complexes and DNA conformational alterations. Also, the buffering capacity of polymers is found to be closely related to their performance in transfection efficiency.

Cooperative-Binding and Splicing-Repressive Properties of hnRNP A1

hnRNP A1 binds to RNA in a cooperative manner. Initial hnRNP A1 binding to an exonic splicing silencer at the 3' end of human immunodeficiency virus type 1 (HIV-1) tat exon 3, which is a high-affinity site, is followed by cooperative spreading in a 3'-to-5' direction. As hnRNP A1 propagates toward the 5' end of the exon, it antagonizes binding of a serine/arginine-rich (SR) protein to an exonic splicing enhancer, thereby inhibiting splicing at that exon's alternative 3' splice site. tat exon 3 and the preceding intron of HIV-1 pre-mRNA can fold into an elaborate RNA secondary structure in solution, which could potentially influence hnRNP A1 binding. We report here that hnRNP A1 binding and splicing repression can occur on an unstructured RNA. Moreover, hnRNP A1 can effectively unwind an RNA hairpin upon binding, displacing a bound protein. We further show that hnRNP A1 can also spread in a 5'-to-3' direction, although when initial binding takes place in the middle of an RNA, spreading preferentially proceeds in a 3'-to-5' direction. Finally, when two distant high-affinity sites are present on the same RNA, they facilitate cooperative spreading of hnRNP A1 between the two sites.

Optical Spectroscopic Methods for Probing the Conformational Stability of Immobilised Enzymes

We report the development of biophysical techniques based on circular dichroism (CD), diffuse reflectance infrared Fourier transform (DRIFT) and tryptophan (Trp) fluorescence to investigate in situ the structure of enzymes immobilised on solid particles. Their applicability is demonstrated using subtilisin Carlsberg (SC) immobilised on silica gel and Candida antartica lipase B immobilised on Lewatit VP.OC 1600 (Novozyme 435). SC shows nearly identical secondary structure in solution and in the immobilised state as evident from far UV CD spectra and amide I vibration bands. Increased near UV CD intensity and reduced Trp fluorescence suggest a more rigid tertiary structure on the silica surface. After immobilised SC is inactivated, these techniques reveal: a) almost complete loss of near UV CD signal, suggesting loss of tertiary structure; b) a shift in the amide I vibrational band from 1658 cm(-1) to 1632 cm(-1), indicating a shift from alpha-helical structure to beta-sheet; c) a substantial blue shift and reduced dichroism in the far UV CD, supporting a shift to beta-sheet structure; d) strong increase in Trp fluorescence intensity, which reflects reduced intramolecular quenching with loss of tertiary structure; and e) major change in fluorescence lifetime distribution, confirming a substantial change in Trp environment. DRIFT measurements suggest that pressing KBr discs may perturb protein structure. With the enzyme on organic polymer it was possible to obtain near UV CD spectra free of interference by the carrier material. However, far UV CD, DRIFT and fluorescence measurements showed strong signals from the organic support. In conclusion, the spectroscopic methods described here provide structural information hitherto inaccessible, with their applicability limited by interference from, rather than the particulate nature of, the support material.

Stable Right- and Left-Handed Peptide Helices containing Cα-Tetrasubstituted α-Amino Acids

Short peptidomimetics with stable secondary structures in solution are of interest for applications in chemistry, biology, and medicine. One way to rigidify the backbone of a peptide is the use of cyclic C(alpha)-tetrasubstituted alpha-amino acids (TAAs) like compound 14. The structures resulting from the incorporation of this unnatural amino acid into peptides were investigated. In total, 13 different peptides with a length of up to eight residues and alternating sequences of TAA 14 and (S)- or (R)-valine were synthesized. Their structures were characterized by X-ray diffraction analysis and NMR and CD measurements showing that the all-S-backbone-configured peptides 5 and 6 (SS)(2-3) form right-handed 3(10)-helices, while the all-R-configured peptides 11-13 (RR)(2-4) form left-handed 3(10)-helices in the solid state and solution.

Helix Persistence and Breakdown in Oligoureas of Metaphenylenediamine: Apparent Diastereotopicity as a Spectroscopic Marker of Helix Length in Solution

Oligomeric ureas derived from m-phenylenediamine with chain lengths of up to seven urea linkages were made by iterative synthetic pathways. Three families were synthesized: 4 and 20, bearing a terminal chiral sulfinyl group; 24, bearing a terminal rotationally restricted amide group, and 30 bearing a terminal achiral bromophenyl group. The distal end of the oligomers was capped with an N-benzyl group to act as a diastereotopic probe. With a terminal sulfinyl group, the 1H NMR signals arising from the CH2 group of the diastereotopic probe remained anisochronous even when separated from the stereogenic center by up to 24 bonds (in 20c). With a rotationally restricted amide, anisochronicity was no longer apparent beyond 17 bond lengths (in 24c). No anisochronicity was observable with a terminal bromophenyl group. We interpret these results as indicating that the oligoureas of short lengths adopt a defined helical secondary structure in solution, but that in longer oligomers the helicity breaks down and transmission of chirality in these systems is limited to about 24 bond lengths. We propose that "apparent diastereotopicity" (anisochronicity) provides a general empirical method for identifying secondary structure in solution.

Self-assembling peptides: Sequence, secondary structure in solution and film formation

Peptides of alternating charge and hydrophobic amino acids have a tendency to adopt unusually stable beta-sheet structures that can form insoluble macroscopic aggregates under physiological conditions. In this study, analogues of a well-known self-assembling peptide, characterized by the same polar/nonpolar periodicity but with different residues, were designed to study the relationship between sequence, conformation in solution and film-forming capacity in saline solution. Peptide conformation, evaluated by circular dichroism, correlated with film forming capacity observed by inverted optical microscopy after addition of saline solution and subsequent drying. We found that polar/nonpolar periodicity of several analogues is not criterion enough to induce beta-sheet and thus film formation and that conformations different from beta-sheet also allow self-assemblage. Furthermore, addition of the short adhesive sequence RGD to a known self-assembling sequence was shown to not prevent the self-assembling process. This finding might prove useful for the design of biomimetic scaffolds.

Crystallographic Characterization of Helical Secondary Structures in α/β-Peptides with 1:1 Residue Alternation

Oligomers that contain both alpha- and beta-amino acid residues in a 1:1 alternating pattern have recently been shown by several groups to adopt helical secondary structures in solution. The beta-residue substitution pattern has a profound effect on the type of helix formed and the stability of the helical conformation. On the basis of two-dimensional NMR data, we have previously proposed that beta-residues with a five-membered ring constraint promote two different types of alpha/beta-peptide helix. The "11-helix" contains i, i+3 CO...H-N hydrogen bonds between backbone amide groups; these hydrogen bonds occur in 11-atom rings. The alpha/beta-peptide "14/15-helix" contains i, i+4 CO...H-N hydrogen bonds, which occur in alternating 14- and 15-atom rings. Here we provide crystallographic data for 14 alpha/beta-peptides that form the 11-helix and/or the 14/15-helix. These results were obtained for a series of oligomers containing beta-residues derived from ( S,S)- trans-2-aminocyclopentanecarboxylic acid (ACPC) and alpha-residues derived from alpha-aminoisobutyric acid (Aib) or l-alanine (Ala). The crystallized alpha/beta-peptides range in length from 4 to 10 residues. Nine of the alpha/beta-peptides display the 11-helix in the solid state, three display the 14/15-helix, and two display conformations that contain both i, i+3 and i, i+4 CO...H-N hydrogen bonds, but not bifurcated hydrogen bonds. Only 3 of the 14 crystal structures presented here have been previously described. These results suggest that longer alpha/beta-peptides prefer the 14/15-helix over the 11-helix, a conclusion that is consistent with previously reported NMR data obtained in solution.

Solitary and Repetitive Binding Motifs for the AP2 Complex α-Appendage in Amphiphysin and Other Accessory Proteins

Adaptor protein (AP) complexes bind to transmembrane proteins destined for internalization and to membrane lipids, so linking cargo to the accessory internalization machinery. This machinery interacts with the appendage domains of APs, which have platform and beta-sandwich subdomains, forming the binding surfaces for interacting proteins. Proteins that interact with the subdomains do so via short motifs, usually found in regions of low structural complexity of the interacting proteins. So far, up to four motifs have been identified that bind to and partially compete for at least two sites on each of the appendage domains of the AP2 complex. Motifs in individual accessory proteins, their sequential arrangement into motif domains, and partial competition for binding sites on the appendage domains coordinate the formation of endocytic complexes in a temporal and spatial manner. In this work, we examine the dominant interaction sequence in amphiphysin, a synapse-enriched accessory protein, which generates membrane curvature and recruits the scission protein dynamin to the necks of coated pits, for the platform subdomain of the alpha-appendage. The motif domain of amphiphysin1 contains one copy of each of a DX(F/W) and FXDXF motif. We find that the FXDXF motif is the main determinant for the high affinity interaction with the alpha-adaptin appendage. We describe the optimal sequence of the FXDXF motif using thermodynamic and structural data and show how sequence variation controls the affinities of these motifs for the alpha-appendage.