Types Of Scaffolds Research Articles

Elderberry (Sambucus nigra) and hawthorn (Crataegus oxyacantha) extract additives in carboxymethyl chitosan scaffolds for osteochondral tissue engineering applications

Elderberry (<i>Sambucus nigra</i>) and hawthorn (<i>Crataegus oxyacantha</i>) extract additives in carboxymethyl chitosan scaffolds for osteochondral tissue engineering applications

Exploring the spectral properties and potential applications of dimethylamine-modified porphyrin and chlorin dyes

The synthesis, structural characterization, and optical properties of new free-base and metalated dimethylamine-based porphyrin (1, 1a) and chlorin (2, 2a) derivatives are presented. The synthetic approach is based on the peripheral substitution of the para-fluor atoms of the commercially available 5,10,15,20-tetrakis(pentafluorophenyl)-21H,23H-porphyrin (H2TPPF20) by dimethylamine (H2Por 1), following the preparation of the analogous chlorin dye (H2Chl 2) using N-methylglycine and p-formaldehyde. Both compounds were then metalated with zinc acetate to perform the corresponding ZnPor 1a and ZnChl 2a dyes. Several photophysical parameters were determined, including absorption and emission features at 298 K (e.g., molar absorptivity coefficients, λ absorption maxima of Soret and/or Q bands, λemission maxima, and ratio of long- to short-wavelength emission intensity), fluorescence quantum yield (ФF), stability (under dark conditions), and photostability (under white light exposure at irradiance of 50 mW.cm−2). The photophysical results were determined and compared for the type of meso-substituted scaffold selected – A4-type – of free-base (1, 2) and zinc(II) complex (1a, 2a). The four compounds exhibit high dark stability in DMF (absorption reduction intensity < 3 %). The Pors 1 and 1a have also high photostability (absorption reduction intensity < 1.5 %), but H2Chl 2 and ZnChl 2a present a considerable absorption reduction, 14.3 % and 22.3 %, respectively. The ФF of the ZnPor 1a (ФF = 0.02) and H2Por 1 (ФF = 0.02) are lower than those of ZnChl 2a (ФF = 0.06) and H2Chl 2 (ФF = 0.09). The developed compounds present potential applications in nonlinear optics, biomarkers, and/or solar cells.

Exploring Indonesian senior high school teachers’ perceptions of first language use in teaching English

This study aims to investigate Indonesian senior high school teachers’ perceptions of using the first language (L1) when teaching English because Indonesian teachers tend to have negative perceptions toward the application of the L1, while the L1 is needed in a situation where Indonesian students have limited skills in English. The semi-structured interview was applied to collect data, while thematic analysis was used to analyse it. The result showed that the teachers have three different positions in perceiving the use of the L1: the virtual position, maximal, and optimal positions. Although they have different perceptions toward the application of the L1, a major insight can be concluded about the limited use of the L1 for specific reasons, such as considering teachers’ and students’ English abilities, learners’ needs, and the type and the difficulty of the given task or assignment. The L1 can be functioned as scaffolding in three aspects: when teaching grammar, vocabulary, and when giving instructions. Teachers may consider this study’s results as the information to use the L1 in classrooms. This may also be beneficial for Indonesian educational stakeholders and the government to specifically define what type of scaffolding that teachers can use the L1 to teach English.

Clinical, Radiographic, and Histologic Outcomes of Regenerative Endodontic Treatment in Human Immature Teeth Using Different Biological Scaffolds: A Systematic Review and Meta-analysis.

Biological scaffolds such as blood clot (BC), platelet-rich plasma (PRP), platelet- rich fibrin (PRF), and platelet pellet (PP) are used in regenerative endodontic treatments (RETs). To systematically and quantitatively evaluate clinical, radiographic, and histologic outcomes of RET studies using different biological scaffolds. MEDLINE, Scopus, Cochrane library, and Embase were searched to identify studies on RET procedures with any scaffold type performed on immature non-vital human teeth, employing any type of biological scaffold. Clinical, radiographic, and histologic outcomes were extracted. Cochrane collaboration risk of bias tool and Newcastle-Ottawa scale were used for quality assessment. Random and fixed model meta-analysis was carried out with 95% confidence interval. Thirty-two studies were included in the qualitative analysis from the primarily retrieved 1895 studies. Only one study had high risk of bias and 71.8% of the studies had high quality. None of the studies reported any histologic findings. Thirty studies were included in meta-analysis. Clinical success rate of RET using either BC, PRP, or PRF was >99%. Furthermore, 32%, 23%, and 27% of BC, PRP, and PRF cases regained vitality, respectively. Periapical healing was seen in 67%, 75%, and 100% of BC, PRP, and PRF cases, respectively. There was no statistical difference between BC, PRP, or PRF regarding clinical success or any radiographic outcomes. There was no significant difference between BC, PRP, and PRF in terms of clinical and radiographic outcomes. When it is difficult or dangerous to induce bleeding in root canals, PRP and PRF may be employed instead.

X-ray crystal structure of a designed rigidified imaging scaffold in the ligand-free conformation.

Imaging scaffolds composed of designed protein cages fused to designed ankyrin repeat proteins (DARPins) have enabled the structure determination of small proteins by cryogenic electron microscopy (cryo-EM). One particularly well characterized scaffold type is a symmetric tetrahedral assembly composed of 24 subunits, 12 A and 12 B, which has three cargo-binding DARPins positioned on each vertex. Here, the X-ray crystal structure of a representative tetrahedral scaffold in the apo state is reported at 3.8 Å resolution. The X-ray crystal structure complements recent cryo-EM findings on a closely related scaffold, while also suggesting potential utility for crystallographic investigations. As observed in this crystal structure, one of the three DARPins, which serve as modular adaptors for binding diverse `cargo' proteins, present on each of the vertices is oriented towards a large solvent channel. The crystal lattice is unusually porous, suggesting that it may be possible to soak crystals of the scaffold with small (≤30 kDa) protein cargo ligands and subsequently determine cage-cargo structures via X-ray crystallography. The results suggest the possibility that cryo-EM scaffolds may be repurposed for structure determination by X-ray crystallography, thus extending the utility of electron-microscopy scaffold designs for alternative structural biology applications.

A Review of Effective Technology-Based Writing Interventions: A Componential Analysis

Previous studies have shown the effectiveness of ICT-based writing instructional practices, but they do not show an in-depth analysis of their instructional elements, which could be key to explaining such effectiveness. This study aims to analyze the instructional design of effective ICT-based writing practices according to content and instructional dimensions. An empirical review was performed following the PRISMA statement guidelines with a sample of 22 studies. For the content dimension, learning objectives were coded in terms of target focus, subject-specific knowledge, and learning outcomes. For the instructional dimension, types of learning and instructional activities were coded, identifying their specific elements. Results showed that learning objectives were mostly focused on practice/internalization of high-level processes. Regarding learning activities, ICT was mainly used in practicing/applying, structuring, and observing/noting activities. Regarding instructional activities, application and demonstration principles appeared most frequently in the interventions, with application activities being most frequently performed by ICTs. Product-focused and corrective types of feedback, as well as static and procedural scaffolding types, were the most frequently performed using ICT. In conclusion, this study provides useful information on what writing activities can be performed using ICT and provide the basis for future studies analyzing to what extent these activities contribute to program effectiveness.

Single-cell 5′ RNA sequencing of camelid peripheral B cells provides insights into cellular basis of heavy-chain antibody production

Camelids produce both conventional tetrameric antibodies (Abs) and dimeric heavy-chain antibodies (HCAbs). Although B cells that generate these two types of Abs exhibit distinct B cell receptors (BCRs), whether these two B cell populations differ in their phenotypes and developmental processes remains unclear. Here, we performed single-cell 5′ RNA profiling of peripheral blood mononuclear cell samples from Bactrian camels before and after immunization. We characterized the functional subtypes and differentiation trajectories of circulating B cells in camels, and reconstructed single-cell BCR sequences. We found that in contrast to humans, the proportion of T-bet+ B cells was high among camelid peripheral B cells. Several marker genes of human B cell subtypes, including CD27 and IGHD, were expressed at low levels in the corresponding camel B cell subtypes. Camelid B cells expressing variable genes of HACbs (VHH) were widely present in various functional subtypes and showed highly overlapping differentiation trajectories with B cells expressing variable genes of conventional Abs (VH). After immunization, the transcriptional changes in VHH+ and VH+ B cells were largely consistent. Through structure modeling, we identified a variety of scaffold types among the reconstructed VHH sequences. Our study provides insights into the cellular context of HCAb production in camels and lays the foundation for developing single-B cell-based camelid single-domain Ab screening.

Therapeutic applications of biological macromolecules and scaffolds for skeletal muscle regeneration: A review

Skeletal muscle (SM) mass and strength maintenance are important requirements for human well-being. SM regeneration to repair minor injuries depends upon the myogenic activities of muscle satellite (stem) cells. However, losses of regenerative properties following volumetric muscle loss or severe trauma or due to congenital muscular abnormalities are not self-restorable, and thus, these conditions have major healthcare implications and pose clinical challenges. In this context, tissue engineering based on different types of biomaterials and scaffolds provides an encouraging means of structural and functional SM reconstruction. In particular, biomimetic (able to transmit biological signals) and several porous scaffolds are rapidly evolving. Several biological macromolecules/biomaterials (collagen, gelatin, alginate, chitosan, and fibrin etc.) are being widely used for SM regeneration. However, available alternatives for SM regeneration must be redesigned to make them more user-friendly and economically feasible with longer shelf lives. This review aimed to explore the biological aspects of SM regeneration and the roles played by several biological macromolecules and scaffolds in SM regeneration in cases of volumetric muscle loss.

Magnetic biocomposite scaffold based on decellularized tendon ECM and MNP-deposited halloysite nanotubes: physicochemical, thermal, rheological, mechanical and in vitro biological evaluations

The development of new three-dimensional biomaterials with advanced versatile properties is critical to the success of tissue engineering (TE) applications. Here, (a) bioactive decellularized tendon extracellular matrix (dECM) with a sol-gel transition feature at physiological temperature, (b) halloysite nanotubes (HNT) with known mechanical properties and bioactivity, and (c) magnetic nanoparticles (MNP) with superparamagnetic and osteogenic properties were combined to develop a new scaffold that could be used in prospective bone TE applications. Deposition of MNPs on HNTs resulted in magnetic nanostructures without agglomeration of MNPs. A completely cell-free, collagen- and glycosaminoglycan- rich dECM was obtained and characterized. dECM-based scaffolds incorporated with 1%, 2% and 4% MNP-HNT were analysed for their physical, chemical, and in vitro biological properties. Fourier-transform infrared spectroscopy, x-ray powder diffractometry and vibrating sample magnetometry analyses confirmed the presence of dECM, HNT and MNP in all scaffold types. The capacity to form apatite layer upon incubation in simulated body fluid revealed that dECM-MNP-HNT is a bioactive material. Combining dECM with MNP-HNT improved the thermal stability and compressive strength of the macroporous scaffolds upto 2% MNP-HNT. In vitro cytotoxicity and hemolysis experiments showed that the scaffolds were essentially biocompatible. Human bone marrow mesenchymal stem cells adhered and proliferated well on the macroporous constructs containing 1% and 2% MNP-HNT; and remained metabolically active for at least 21 d in vitro. Collectively, the findings support the idea that magnetic nanocomposite dECM scaffolds containing MNP-HNT could be a potential template for TE applications.

Optimization of Enzymatic and Chemical Decellularization of Native Porcine Heart Valves for the Generation of Decellularized Xenografts.

One of the most important medical interventions for individuals with heart valvular disease is heart valve replacement, which is not without substantial challenges, particularly for pediatric patients. Due to their biological properties and biocompatibility, natural tissue-originated scaffolds derived from human or animal sources are one type of scaffold that is widely used in tissue engineering. However, they are known for their high potential for immunogenicity. Being free of cells and genetic material, decellularized xenografts, consequently, have low immunogenicity and, thus, are expected to be tolerated by the recipient's immune system. The scaffold ultrastructure and ECM composition can be affected by cell removal agents. Therefore, applying an appropriate method that preserves intact the structure of the ECM plays a critical role in the final result. So far, there has not been an effective decellularization technique that preserves the integrity of the heart valve's ultrastructure while securing the least amount of genetic material left. This study demonstrates a new protocol with untraceable cells and residual DNA, thereby maximally reducing any chance of immunogenicity. The mechanical and biochemical properties of the ECM resemble those of native heart valves. Results from this study strongly indicate that different critical factors, such as ionic detergent omission, the substitution of Triton X-100 with Tergitol, and using a lower concentration of trypsin and a higher concentration of DNase and RNase, play a significant role in maintaining intact the ultrastructure and function of the ECM.

Mechanically operated signalling scaffolds.

Cellular signalling is a complex process and involves cascades of enzymes that, in response to a specific signal, give rise to exact cellular responses. Signalling scaffold proteins organise components of these signalling pathways in space and time to co-ordinate signalling outputs. In this review we introduce a new class of mechanically operated signalling scaffolds that are built into the cytoskeletal architecture of the cell. These proteins contain force-dependent binary switch domains that integrate chemical and mechanical signals to introduce quantised positional changes to ligands and persistent alterations in cytoskeletal architecture providing mechanomemory capabilities. We focus on the concept of spatial organisation, and how the cell organises signalling molecules at the plasma membrane in response to specific signals to create order and distinct signalling outputs. The dynamic positioning of molecules using binary switches adds an additional layer of complexity to the idea of scaffolding. The switches can spatiotemporally organise enzymes and substrates dynamically, with the introduction of ∼50 nm quantised steps in distance between them as the switch patterns change. Together these different types of signalling scaffolds and the proteins engaging them, provide a way for an ordering of molecules that extends beyond current views of the cell.

A Sociocultural Perspective on the Impact of Instructor Versus Peer Scaffolding Upon Lexical Digesting and Reading Perception

Based on a sociocultural theory and a plethora of experiential studies on the efficacy of scaffolding on foreign language learning, the goal of this research article is to examine the effectiveness of diverse types of scaffolding on university students’ lexical digesting and reading perception from a sociocultural standpoint. Using the Harvard Placement Test, 40 EFL students from a total of 70 were selected and divided into two experimental groups and a single control group. The first group (G1 Exp.) was given teaching with instructor scaffolding, the second group (G2 Exp.) received instruction with peer scaffolding, and the control group (G3 Cont.) received conventional instruction without any external enhancement. Pretests for lexical digesting and reading perception were administered to the three groups. Following the treatment, post-tests for lexical digesting and reading perception were administered. Descriptive statistics and inferential statistics were used to examine the collected data. The results showed a significant difference between instructor and peer scaffolding, with the peer scaffolding group outperforming the instructor scaffolding group. Both experimental groups outperformed the control group in lexical digesting and reading perception. Regarding various kinds of scaffolding, this study provided some advice for psycholinguists, curriculum designers, and language instructors.

An Overview on the Big Players in Bone Tissue Engineering: Biomaterials, Scaffolds and Cells.

Presently, millions worldwide suffer from degenerative and inflammatory bone and joint issues, comprising roughly half of chronic ailments in those over 50, leading to prolonged discomfort and physical limitations. These conditions become more prevalent with age and lifestyle factors, escalating due to the growing elderly populace. Addressing these challenges often entails surgical interventions utilizing implants or bone grafts, though these treatments may entail complications such as pain and tissue death at donor sites for grafts, along with immune rejection. To surmount these challenges, tissue engineering has emerged as a promising avenue for bone injury repair and reconstruction. It involves the use of different biomaterials and the development of three-dimensional porous matrices and scaffolds, alongside osteoprogenitor cells and growth factors to stimulate natural tissue regeneration. This review compiles methodologies that can be used to develop biomaterials that are important in bone tissue replacement and regeneration. Biomaterials for orthopedic implants, several scaffold types and production methods, as well as techniques to assess biomaterials' suitability for human use-both in laboratory settings and within living organisms-are discussed. Even though researchers have had some success, there is still room for improvements in their processing techniques, especially the ones that make scaffolds mechanically stronger without weakening their biological characteristics. Bone tissue engineering is therefore a promising area due to the rise in bone-related injuries.

The learning analytics of computational scientific modeling with self-explanation for subgoals and demonstration scaffolding

The emphasis of using computing tools in scientific practice has called for new forms of scientific modeling. Therefore, researchers are paying increasing attention to computational scientific modeling in which students use the computational power of computers to model and learn about science phenomena. However, computational scientific modeling is challenging since it involves not only scientific concepts but also uses computational representations to model the science concepts. This study hypothesizes that prompting students to self-explain critical subgoals of computational scientific modeling before taking part in the construction of models would help them construct correct computational models. This study recruited 65 10th grade students in a 6-week program. They were randomly assigned to a self-explanation group (n = 29) where students learned with the self-explanation for subgoals of computational scientific modeling, and a demonstration group (n = 36) where the teacher directly demonstrated the modeling process before students took part in the modeling activity. This study collected the students' performance in a paper-based and hands-on modeling test, and also their modeling actions in the hands-on test to understand the impact of the self-explanation scaffolding on their computational scientific modeling. The results showed that the two groups demonstrated similar levels of improvements in the paper-based test, suggesting that both types of scaffolding are helpful for computational scientific modeling learning. However, the self-explanation group demonstrated significantly better modeling quality in the hands-on test. Furthermore, the spotlight analysis found the moderation effect of the modeling actions on the relation between the two treatments and the model quality. The self-explanation group constructed high quality models if they took only a low number of modeling actions. Conversely, frequent modeling actions are necessary for the demonstration group to construct quality scientific models. The results suggest that the self-explanation scaffolding is more effective since students did not simply rely on the trial-and-error strategy, but adopted a strategic approach to constructing scientific models.

Formation of osteoconductive biograft with bioorganic scaffold, human mesenchymal stromal cells, and platelet-rich plasma with its evaluation in vitro

BackgroundComplex graft bioengineering is an actual topic in bone defects’ repair. For those, different scaffolds may be seeded with mesenchymal stromal cells and growth / differentiation factors. The natural role of platelet factors in reparative processes justifies the possibility of its usage for mesenchymal stromal cell proliferation and differentiation into osteoblasts in vitro in terms of the scaffold-based bioengineering. To develop and evaluate in vitro biocompatibility and osteoconductivity of a complex biograft based on a bioorganic scaffold seeded with human bone marrow mesenchymal stromal cells and saturated with growth and differentiation factors of allogeneic platelet-rich plasma. ResultsThe properties of viability and adhesion of human bone marrow mesenchymal stromal cells in four types of bioorganic scaffolds were evaluated with biochemical and immunomorphological methods. Scaffold with the least cytotoxicity was used as a basis for complex biograft formation, so as a carrier for cells and platelet-derived factors. Then, cell proliferation activity and osteogenic differentiation were estimated with biochemical, morphological, histochemical and molecular-biological methods. The study showed high viability of cells in all bioorganic scaffolds but the least cytotoxicity was the one based on xenogeneic collagen sponge. We also found that allogeneic platelet-rich plasma positively affects the proliferation and osteogenic differentiation of bone marrow mesenchymal stromal cells in a complex biograft in vitro. ConclusionsThe properties of the developed complex biograft characterize its biocompatibility and osteoconductivity and make it potentially suitable for regenerative medicine, particularly for reconstructive surgery of bone defects.How to cite: Danilkovich NN, Kosmacheva SM, Ionova AG, et al. Formation of osteoconductive biograft with bioorganic scaffold, human mesenchymal stromal cells, and platelet rich plasma with its evaluationin vitro. Electron J Biotechnol 2024;69. https://doi.org/10.1016/j.ejbt.2024.01.004.

ZnO-doped β-TCP ceramic-based scaffold promotes osteogenic and antibacterial activity

β-Tricalcium phosphate (β-TCP) scaffolds, which are synthetic bone graft materials, have been explored as a potential solution in the healing of bone deformities due to their acceptable degradation rate and ability to support bone growth. However, these scaffolds have limitations such as poor mechanical properties, to stimulate bone growth, which increases the risk of infection after implantation. To overcome these issues, a new type of biomedical scaffold was developed that incorporated zinc oxide (ZnO) particles into β-TCP using wet chemical techniques. The scaffolds were created using sintering to produce porous β-TCP scaffolds with good connectivity. The addition of zinc oxide as a dopant significantly improved the biophysical properties of the scaffolds, with higher concentrations of zinc oxide, leading to better cell adhesion and proliferation. The scaffolds placed in simulated body fluid demonstrated exceptional ability to promote bone growth and regeneration by developing a bone-like apatite layer on their surfaces. The mechanical and physical properties of the scaffolds were effectively assessed using X-ray diffraction and scanning electron microscopy analyses. To validate the efficacy of the specimen in preventing microbial growth and promoting bone growth, a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) test and gene expression investigation were conducted. Zinc oxide-doped β-TCP scaffolds are envisaged to show enormous potential for use in future bone-healing applications.

Fabrication of 3D-printed scaffolds loaded with gallium acetylacetonate for potential application in osteoclastic bone resorption

We recently reported the potential of a new gallium compound, gallium acetylacetonate (GaAcAc) in combating osteoclastic bone resorption through inhibition of osteoclast differentiation and function. Herein, we focused on 3D-printed polylactic acid scaffolds that were loaded with GaAcAc and investigated the impact of scaffold pretreatment with polydopamine (PDA) or sodium hydroxide (NaOH). We observed a remarkable increase in scaffold hydrophilicity with PDA or NaOH pretreatment while biocompatibility and in vitro degradation were not affected. NaOH-pretreated scaffolds showed the highest amount of GaAcAc loading when compared to other scaffolds (p < 0.05). NaOH-pretreated scaffolds with GaAcAc loading showed effective reduction of osteoclast counts and size. The trend was supported by suppression of key osteoclast differentiation markers such as NFAT2, c-Fos, TRAF6, & TRAP. All GaAcAc-loaded scaffolds, regardless of surface pretreatment, were effective in inhibiting osteoclast function as evidenced by reduction in the number of resorptive pits in bovine cortical bone slices (p < 0.01). The suppression of osteoclast function according to the type of scaffold followed the ranking: GaAcAc loading without surface pretreatment > GaAcAc loading with NaOH pretreatment > GaAcAc loading with PDA pretreatment. Additional studies will be needed to fully elucidate the impact of surface pretreatment on the efficacy and safety of GaAcAc-loaded 3D-printed scaffolds.

Biomimetic Scaffolds-A Novel Approach to Three Dimensional Cell Culture Techniques for Potential Implementation in Tissue Engineering.

Biomimetic scaffolds imitate native tissue and can take a multidimensional form. They are biocompatible and can influence cellular metabolism, making them attractive bioengineering platforms. The use of biomimetic scaffolds adds complexity to traditional cell cultivation methods. The most commonly used technique involves cultivating cells on a flat surface in a two-dimensional format due to its simplicity. A three-dimensional (3D) format can provide a microenvironment for surrounding cells. There are two main techniques for obtaining 3D structures based on the presence of scaffolding. Scaffold-free techniques consist of spheroid technologies. Meanwhile, scaffold techniques contain organoids and all constructs that use various types of scaffolds, ranging from decellularized extracellular matrix (dECM) through hydrogels that are one of the most extensively studied forms of potential scaffolds for 3D culture up to 4D bioprinted biomaterials. 3D bioprinting is one of the most important techniques used to create biomimetic scaffolds. The versatility of this technique allows the use of many different types of inks, mainly hydrogels, as well as cells and inorganic substances. Increasing amounts of data provide evidence of vast potential of biomimetic scaffolds usage in tissue engineering and personalized medicine, with the main area of potential application being the regeneration of skin and musculoskeletal systems. Recent papers also indicate increasing amounts of in vivo tests of products based on biomimetic scaffolds, which further strengthen the importance of this branch of tissue engineering and emphasize the need for extensive research to provide safe for humansbiomimetic tissues and organs. In this review article, we provide a review of the recent advancements in the field of biomimetic scaffolds preceded by an overview of cell culture technologies that led to the development of biomimetic scaffold techniques as the most complex type of cell culture.

An Exploration of the Impact of Cognitive, Meta-cognitive and Motivational Scaffolding on EFL Students Oral Production in Asia Context

This paper examined the efficiency of three types of scaffolding (cognitive, meta-cognitive and motivational scaffolding) in boosting English as Foreign Language (EFL) university students speaking motivation and proficiency in the context of Asia. To this end, this study is carried out by reviewing and synthesizing previous literature and empiric work. It is found out that each type of scaffolding is effective in improving learners oral production. However, an ambiguous classification between these three scaffolds, in terms of their operational definitions, would made it hard to measure the extent to which students speaking performance can be influenced by each type of scaffold alone. Hence, the answer to which type of scaffold is the most effective is inconclusive. In addition, the exploration of the motivational scaffold framework aimed to focus on learners emotional needs is in progress, yet a much more significant amount of studies and empirical work about this type of scaffold will be needed, in terms of investigating its impact on students both cognitive and affective aspects. Finally, no current research empirically investigated the impact of these scaffolds on students speaking motivation; instead only a fragment of descriptive comments can be found in a few studies.

Synthetic receptor scaffolds significantly affect the efficiency of cell fate signals

Mimicry of receptor functions by designing synthetic receptors would be one of the recently hot research trends in cell engineering. While several types of synthetic receptors have been designed to induce desired cell fates in response to external stimuli, little is known about which receptor type signals more efficiently for inducing a certain cell fate. In this study, we compared the performance of three types of synthetic receptor scaffolds, i.e. myristoylated, cytosolic, and transmembrane types that signal through JAK-dependent phosphorylation of tyrosine motifs to transduce growth signaling. As a result, the phosphorylation levels of JAK and subsequent downstream signaling molecules were significantly maintained in the cytosolic type receptors, leading to more efficient cell growth than the other types. In contrast, the phosphorylation levels of JAK decreased in a motif-dependent manner in the transmembrane type receptors. Although various studies on receptor engineering based on domain or motif engineering have been reported, to our knowledge this study is the first to demonstrate that synthetic receptor scaffolds significantly affect the efficiency of cell fate signals. These findings are important for both receptor biology and receptor engineering, providing guidelines for rationally designing synthetic receptors that can transduce as efficient signaling as possible.