Water Samples Research Articles

Physio-chemical and bacteriological quality of well water from Kottayam district, Kerala

This study focused on determining of physio-chemical, Biological and Weighed water quality index of well water samples from twelve different stations in Kottayam district, Kerala. The water samples analyzed for physio-chemical parameters including pH, Electrical conductivity, TDS (Total Dissolved Solids), Total iron, Bacterial contamination and water quality index was calculated. All 120 samples were analyzed separately and were compared with the water quality standard prescribed by the APHA and IS 3025. It was found that the mean pH values showed slight variations ranging from 5.85±0.72- 7.19±2.09. The electrical conductivity showed variations ranging from 64.9±46.34- to 366.4±561.8. The well water samples were shown the TDS value under the permissible limit with a range of 42±39.8-248.2±393.03. A significant variation in total iron value was obtained from the Neendoor station and the range is 0.0033±0.0069-0.5525±1.703. Weighted water quality index was calculated based on physiochemical parameters and it is evident that the water from Neendoor station is unsuitable for drinking purposes. The bacterial concentrations of Pampady station showed 90% contamination and 65.8% of water samples were showed Indicator organism Escherichia coli.

Superhydrophobic Metal-Organic Framework-Based Composite Featuring Removal of Hydrophobic Drugs and Pesticides and Antibacterial Activities.

The widespread use and contamination of natural sources by new-generation drugs and pesticides have enhanced concern about environmental pollution. Understanding the above importance, we developed a superhydrophobic metal-organic framework (MOF) (SHMOF': [Zr6O4(OH)4(BDC-NH-CO-R)2.4(BDC-NH2)0.6(CF3COO)6]·2.5H2O·4DMF) for ecological remediation via adsorption-based separation of hydrophobic drugs (flurbiprofen) and pesticides (fluazinam). The newly developed SHMOF' has a high adsorption capacity toward flurbiprofen and fluazinam, i.e., 435 and 575 mg/g, respectively. The adsorption equilibrium time of the MOF is very short (15 and 10 min for flurbiprofen and fluazinam, respectively). The outstanding superhydrophobic nature of the MOF was employed to separate flurbiprofen and fluazinam from highly alkaline and acidic media and environmental water samples. The SHMOF' has excellent selectivity toward the adsorption-based separation of flurbiprofen and fluazinam in the coexistence of common analytes. Again, we developed a polypropylene (PP) fabric-based composite of SHMOF' (SHMOF'@PP) to separate the hydrophobic targeted analytes by using a zero-energy-consuming filtration-based separation method, which made this separation process cost-efficient and user-friendly. Moreover, Ag nanoparticles were doped to the superhydrophobic composite. The Ag-doped reusable SHMOF'@PP@Ag composite exhibited excellent bacterial antiadhesion and antibacterial properties toward Staphylococcus aureus bacteria.

A rapid on-site loop-mediated isothermal amplification technology as an early warning system for the detection of Shiga toxin-producing Escherichia coli in water.

Shiga toxin-producing Escherichia coli (STEC) is an important waterborne pathogen capable of causing serious gastrointestinal infections with potentially fatal complications, including haemolytic-uremic syndrome. All STEC serogroups harbour genes that encode at least one Shiga toxin (stx1 and/or stx2), which constitute the primary virulence factors of STEC. Loop-mediated isothermal amplification (LAMP) enables rapid real-time pathogen detection with a high degree of specificity and sensitivity. The aim of this study was to develop and validate an on-site portable diagnostics workstation employing LAMP technology to permit rapid real-time STEC detection in environmental water samples. Water samples (n=28) were collected from groundwater wells (n=13), rivers (n=12), a turlough (n=2) and an agricultural drain (n=1) from the Corrib catchment in Galway. Water samples (100 ml) were passed through a 0.22 µm filter, and buffer was added to elute captured cells. Following filtration, eluates were tested directly using LAMP assays targeting stx1, stx2 and E. coli phoA genes. The portable diagnostics workstation was used in field studies to demonstrate the on-site testing capabilities of the instrument. Real-time PCR assays targeting stx1 and stx2 genes were used to confirm the results. The limit of detection for stx1, stx2 and phoA LAMP assays were 2, 2 and 6 copies, respectively. Overall, stx1, stx2 and phoA genes were detected by LAMP in 15/28 (53.6 %), 9/28 (32.2 %) and 24/28 (85.7 %) samples, respectively. For confirmation, the LAMP results for stx1 and stx2 correlated perfectly (100 %) with those obtained using PCR. The portable diagnostics workstation exhibited high sensitivity throughout the on-site operation, and the average time from sample collection to final result was 40 min. We describe a simple, transferable and efficient diagnostic technology for on-site molecular analysis of various water sources. This method allows on-site testing of drinking water, enabling evidence-based decision-making by public health and water management authorities.

Source-to-tap investigation of the occurrence of nontuberculous mycobacteria in a full-scale chloraminated drinking water system.

Nontuberculous mycobacteria (NTM) in drinking water are a significant public health concern. However, an incomplete understanding of the factors that influence the occurrence of NTM in drinking water limits our ability to characterize risk and prevent infection. This study sought to evaluate the influence of season and water treatment, distribution, and stagnation on NTM in drinking water. Samples were collected source-to-tap in a full-scale, chloraminated drinking water system approximately monthly from December 2019 to November 2020. NTM were characterized using culture-dependent (plate culture with matrix-assisted laser desorption ionization-time-of-flight mass spectrometry [MALDI-TOF MS] isolate analysis) and culture-independent methods (quantitative PCR and genome-resolved metagenomics). Sampling locations included source waters, three locations within the treatment plant, and five buildings receiving water from the distribution system. Building plumbing samples consisted of first draw, 5-min flush, and full flush cold-water samples. As the study took place during the COVID-19 pandemic, the influence of reduced water usage in three of the five buildings was also investigated. The highest NTM densities source-to-tap were found in the summer first draw building water samples (107 gene copies/L), which also had the lowest monochloramine concentrations. Flushing was found to be effective for reducing NTM and restoring disinfectant residuals, though flush times necessary to improve water quality varied by building. Clinically relevant NTM species, including Mycobacterium avium, were recovered via plate culture, with increased occurrence observed in buildings with higher water age. Four of five NTM metagenome-assembled genomes were identified to the species level and matched identified isolates.IMPORTANCENTM infections are increasing in prevalence, difficult to treat, and associated with high morbidity and mortality rates. Our lack of understanding of the factors that influence NTM occurrence in drinking water limits our ability to prevent infections, accurately characterize risk, and focus remediation efforts. In this study, we comprehensively evaluated NTM in a full-scale drinking water system, showing that various steps in treatment and distribution influence NTM presence. Stagnant building water contained the highest NTM densities source-to-tap and was associated with low disinfectant residuals. We illustrated the differences in NTM detection and characterization obtained from culture-based and culture-independent methods, highlighting the complementarity between these approaches. We demonstrated that focusing NTM mitigation efforts in building plumbing systems, which have the highest NTM densities source-to-tap, has potential for immediate positive effects. We also identified steps during treatment that increase NTM levels, which provides beneficial information for utilities seeking to reduce NTM in finished water.

Structural alterations in scales of Capoeta capoeta (Güldenstädt, 1773) from heavy metal-contaminated river water.

Heavy metal pollution, especially in freshwater, is a serious problem for aquatic organisms and human health. In this study, the scales of Capoeta capoeta living in the Karasu River (Turkey), which is estimated to be contaminated with pollutants, especially heavy metals, were examined for structural anomalies. Two stations on the river were selected for this purpose. Fish and surface water samples were taken at the stations. The heavy metal analyses were carried out in the water and the fish tissue. Heavy metal pollution was detected in the surface water. It was also observed that some heavy metals (As, Cu, Cd, Cr, Mn, Pb, Ni, Zn) accumulate in the fish tissue. Significant structural differences were observed on the dorsal surface of the scales, such as interrupted primary radii, damaged circuli, damaged focus, damaged anterior scale margin, broken focus, deformed scale structure, scattered chromatophores, dilatation of primary radii, loss of focus, damaged annuli, symmetry shift in the lateral line canal, eroded circuli, damaged posterior scale margin, double focus, branching in the primary radii, asymmetric circuli, incomplete annuli and interrupted secondary radii in each of the fish collected from the contaminated site. Heavy metals are suspected to be responsible for the structural anomalies in the scales. Based on these observations, it can be said that fish scales can be used as an effective indicator of water quality.

Migration characteristics of microplastics in riparian soils and groundwater.

Investigations have revealed the presence of microplastics in both soil and groundwater, but the migration characteristics from soil to groundwater remain incompletely understood. In this study, two sampling sections consisting of soil-groundwater-river water were established near Lianxi Bridge and Xilin Bridge along the Jiuxi River in Xiamen. A total of 22 soil samples, 36 groundwater samples, and 18 river water samples were collected. Microplastics were detected in all samples with an abundance range of 392-836 n/kg in soil (mean, 655 ± 177 n/kg), 0.58-2.48 n/L groundwater (mean, 1.23 ± 0.42 n/L), and 0.38-1.80 n/L in river water (mean, 0.86 ± 0.41 n/L). Flakes predominantly constituted the shape of microplastics found in soil, while fibers dominated those present in water. Black, yellow, and red were the dominant color types. Polyamide (PA) and polyethylene (PE) were the main components of microplastics within soils, whereas polyethylene terephthalate (PET), polypropylene (PP), and PA prevailed within water. Microplastic particle sizes ranged from 39 to 2498μm in soils, mainly from 29 to 3394μm in water. The upstream section displayed higher abundances of microplastic compared to the downstream, revealing the soil particles having an intercepting effect on microplastics. The distribution and migration of microplastics in soil and groundwater are affected by many factors, including natural and anthropogenic factors, such as soil depth, soil properties, pore structure, hydrodynamics, hydraulic connections between groundwater and surface water, the extensive utilization and disposal of plastics, irrational exploitation of groundwater, and morphology and types of microplastics. These research findings contribute to a better understanding of the pathways, migration capacity, and influencing factors associated with microplastic entry into groundwater, thereby providing valuable technical support for the development of strategies aimed at controlling microplastic pollution.

Multiplex Real-Time Polymerase Chain Reaction Assay To Detect Acanthamoeba spp., Vermamoeba vermiformis, Naegleria fowleri, and Balamuthia mandrillaris in Different Water Sources.

Free-living amoebae (FLA) are widely distributed in the environment. Among these, Acanthamoeba spp., Naegleria fowleri, Balamuthia mandrillaris, and Vermamoeba vermiformis have been reported as human pathogens with health effects ranging from lethal encephalitis to different epithelial disorders. Despite this, FLA still present many diagnostic challenges. The aim of this study was to develop a rapid and efficient multiplex real-time quantitative polymerase chain reaction (qPCR) to simultaneously detect Acanthamoeba spp., N. fowleri, B. mandrillaris, and V. vermiformis in different water sources. For the validation of the qPCR assay, 38 samples (19 tap water and 19 stagnant water sources) were analyzed. The qPCR assay accurately identified the four types of FLA with no cross-reactivity. Considering water samples with results subsequently confirmed by conventional PCR, the multiplex qPCR assay detected 18/38 (47.4%) positive samples (Acanthamoeba spp. in 44.7% and V. vermiformis in 31.6%) and growth in nonnutritive agar (NNA) cultures identified 7/38 (18.4%) positive samples. Of the tap water samples analyzed, 26.3% of samples positive for FLA were detected by growth in NNA culture whereas 31.6% were identified by qPCR. In addition, FLA were detected in 2/19 stagnant water samples (10.5%) by growth in NNA culture and in 12/19 stagnant water samples (63.2%) by qPCR. Neither N. fowleri nor B. mandrillaris was detected in the water samples analyzed. In conclusion, the qPCR developed showed its potential as a rapid tool for detection of Acanthamoeba spp., N. fowleri, B. mandrillaris, and V. vermiformis. Moreover, FLA species were detected in half of the water sources evaluated, suggesting the importance of the surveillance of these potential infectious agents.

Environmental Radiological Impact and Risk Assessment of Natural Radioactivity at the Heap Leach Facility of Tarkwa Goldmine, Ghana: Radiotoxicity and Public Exposure

In this study, a comprehensive investigation was conducted to determine the radioactivity levels of naturally occurring radioactive materials (NORMs) in heap pads/soil and water samples within and around the operational area of Tarkwa Gold Mine in Ghana. Gamma-ray spectrometry was used to determine the activity concentrations of 238U, 232Th, and 40K in heap pads/soil, and 226Ra, 228Th, and 40K in water samples. The average activity concentrations of 226Ra and 228Th in all water samples were below the World Health Organisation (WHO) recommended guidelines for drinking water. Similarly, the average activity concentrations of measured radionuclides in heap pads/soil samples taken from depths of 0–20 cm and 20–50 cm were found to be below the worldwide average reported values. The annual effective dose to the public was estimated to be around 0.16 mSv, which is below the recommended limit. The values of the hazard indices are also below the recommended limits, implying that if heap pads/soils are used for building purposes and construction, they will not pose any significant radiation hazard. The results of this study indicate that radiation levels are within the natural background radiation levels reported in the literature and are consistent with findings from similar studies conducted in Ghana.

Assessment of Radon Concentration and Health Hazards in Natural Spring Water of a Sub-Himalayan District

The objective of this study was to evaluate the extent of radon contamination in twenty-six drinking water samples from natural springs were collected from Dhirkot Azad Kashmir, along with four bottled mineral water samples. Radon gas escapes from the earth’s crust due to uranium ores and diffuses into the atmosphere. This study assessed the levels of radon concentration, the yearly effective radiation dose, and carcinogenic risk from radon exposure in drinking water samples. The radon concentration varied from 0.28 to 30.25 Bq/L. The mean radon concentration of all samples was found to be 7.86 ± 2.3 Bq/L. The radon concentrations in bottled drinking water were found to be lower than those in natural springs. The statistical and GIS analyses included the use of interpolation and Pearson’s correlation matrix. Seven samples had radon concentration that surpassed the standard limit established by the US-EPA, which is 11 Bq/L. The average annual effective dose from inhalation and ingestion was found to be lower than the value (0.1 mSv/y) provided by the WHO, but for some natural spring water samples, it exceeded the risk limit. The cancer risk revealed that 40% of the samples had an elevated lifetime cancer risk from radon exposure. Overall, the majority of the results obtained aligned with the worldwide guidelines established by the US-EPA. However, there were a few instances where the limits were exceeded, and constant monitoring is recommended. This study establishes a baseline for radon concentration in the area and provides a basis for future studies.

Magnetically Controllable Paper-Based Soft Robots for Colorimetric Detection of Heavy Metal Ions.

Magnetically controllable soft robots are of great interest because they have unique properties compared with conventional rigid counterparts and can be used in diverse applications such as intelligent electronics, bionics, personalized medicine, and cargo grasping. However, the fabrication of such multifunctional soft robots has been challenging because of the integration of dissimilar materials into the robot body. Herein, we designed and fabricated a soft robotic multifunctional system using conventional papers and elastomeric polymers for the colorimetric detection of heavy metal ions (Hg2+ and Fe3+) in water samples. The magnetic actuation of the platforms was shown to correlate with the type of underlying paper and magnetic particle content in the mixtures. Moreover, it was observed that actuation can also be manipulated by controlling the magnetic field strength. A proof-of-concept robotic paper-based Hg2+, Zn2+, and Fe3+ ion detection was demonstrated by combining colorimetric paper sensors and magneto-papers. Our study highlights the significant potential of paper as a material for the fabrication of effective and multifunctional untethered soft robots.

A cathodically polarized PANI-based lead ion-selective electrode: achieving high stability with antibiofouling capabilities.

Solid-state contact ion-selective electrodes (SC-ISEs) are an efficacious means of monitoring heavy metal contamination. Instability of the electrode potential is a key factor limiting their development, with biofouling in real water samples posing a significant challenge to maintaining stability. Therefore, addressing biofouling is crucial for optimizing solid-state ion-selective electrodes. In this work, high stability and antibiofouling capability in a solid-state contact lead ion-selective electrode (SC-Pb2+-ISE) based on polyaniline (PANI) was achieved through cathodic polarization. Specifically, PANI played a dual role in the ion-selective membrane (ISM) as an ion-to-electron transducer and antifouling agent. Given the excellent electrochemical performance of PANI, the prepared electrode (GC/PANI-Pb2+-ISM) demonstrated a remarkable antibiofouling efficiency of 98.2% under a cathodic polarization of -0.2V. Furthermore, a standard deviation of standard potential (Eθ) as low as ± 0.5mV was realized successfully. The excellent chrono-potentiometric stability of 17.0 ± 2.9μV/s was also demonstrated. The electrode maintained a Nernstian response slope of 30.7 ± 0.2 (R2 = 0.998) after applying a cathode potential (-0.2V) for 30min. The developed GC/PANI-Pb2+-ISM electrode is suitable for practical applications in real environmental water sample monitoring.

Efficient removal of polycyclic aromatic hydrocarbons from aqueous solutions using green cyclodextrin-maltodextrin nanosponge incorporated polyvinyl alcohol cryogel

Developing efficient adsorbents for removing polycyclic aromatic hydrocarbons (PAHs) from aqueous solutions is a significant and worthwhile approach. In this study, we showcase a method for fabricating β-cyclodextrin-maltodextrin nanosponges (βCD-MD) incorporated polyvinyl alcohol (PVA) cryogel for removing PAHs from aqueous solutions. The composite nanosponges enhanced the adsorption efficiency of PAHs such as Naphthalene, Acenaphthene, Fluorene, Phenanthrene, Anthracene, Fluoranthene, Pyrene, and Benzo[a]pyrene from water samples and the porous PVA cryogel helped to entrap and prevent the loss of the adsorbent. This efficacy was attributed to the strong affinities of PAHs toward βCD-MD nanosponges, facilitated by hydrophobic interactions between the analytes and the hydrophobic inner region present in both dextrins. The removal efficiency of the prepared βCD-MD/PVA composite cryogel was more than 95 % for all 8 PAHs (C0 = 5.0 mg/L) in less than 30 min, and the experimental data were well described by the Freundlich isotherm and the pseudo-second-order kinetic model. Additionally, the βCD-MD/PVA composite cryogel exhibited a maximum adsorption capacity ranging from 16.34 to 18.49 mg/g for eight PAHs. Moreover, the thermodynamic study revealed that the adsorption of PAHs was an endothermic and spontaneous process. The βCD-MD/PVA composite cryogel exhibited an abundance of polar functional groups along with numerous hydrophobic cavities and regions. It demonstrated high mechanical and thermal stability and maintained high removal efficiency even after seven adsorption–desorption cycles. Overall, it was concluded that βCD-MD/PVA composite cryogel can be utilized as a high-performance, eco-friendly, and sustainable alternative for PAH removal.

On-site extraction of benzophenones from swimming pool water using hybrid tapes based on the integration of hydrophilic-lipophilic balance microparticles and an outer magnetic nanometric domain

An on-site extraction device is presented consisting of scotch tape modified with concentric domains of micrometric hydrophilic-lipophilic balance (HLB) particles surrounded by a ring of nanometric magnetic ones. On the one hand, HLB microparticles are readily available at the surface of the tape, exposed to interact with the target analytes, being responsible for the extraction capacity of the sorptive phase. On the other hand, the presence of magnetic nanoparticles enables the attachment of the modified tape onto a metallic screw via a magnet, which is then coupled to a wireless drill, enabling the stirring of the microextraction device. Both are simply fixed to the cost-effective, flexible, and versatile support, i.e., scotch tape, owing to their adhesive properties. The microextraction device has been applied to the determination of six benzophenones in swimming pool water samples. The variables that may affect the extraction process have been evaluated. Under the optimum conditions and using liquid chromatography-tandem mass spectrometry as the instrumental technique, the method provided a limit of detection of 0.03 µg L−1. The intra-day precision, evaluated at three different concentration levels and expressed as relative standard deviation, was lower than 10%, which also comprises the variability within single-use sorptive tapes. The accuracy, calculated with spiked samples and expressed as relative recovery, ranged from 71 to 138%. The method was applied to the analysis of swimming pool water, revealing the presence of such compounds.Graphical

Spatial and seasonal assessment of surface water quality for domestic use in a semi-arid area of the Upper Kebir Sub-basin, NE Algeria

ABSTRACT The present study was conducted out in the Upper Kebir Sub-basin [North East (NE) Algeria] aiming to evaluate the status and spatial–seasonal variability of water quality for domestic purposes using hydrogeochemical parameters and water quality indices. Surface water samples were collected from selected 27 sites, in the period 2020–2021 during both the wet and dry seasons and were analysed for 22 parameters. The findings were compared with standards and the water quality indices were calculated. The analysis revealed that the basin was mainly polluted and showed significant seasonal and spatial variations in water quality, considerably influenced by climatic conditions (surface runoff) and human activities (urban sewage and agricultural activities). The results reveal significant spatio-temporal fluctuations and highlight areas likely to be affected by anthropogenic activities.

Impact of coexisting microalgae species and bacteria in the presence level of fishy odor-causing Uroglena sp. in surface water.

The study investigated the interplay of factors influencing the occurrence of Uroglena sp. blooms in surface water, particularly during the spring season. While Uroglena sp. typically demonstrates a propensity for blooming during the spring season, diminished population density was documented, underscoring the influence of pertinent environmental factors. To study the determinants, surface water samples collected for 3years were analyzed for general water quality parameters, coexisting microalgae species, and total bacteria. Key determinants were found to include the ratio of dissolved nitrogen to dissolved phosphorus (DN: DP), temperature, bacterial density, the presence of Dinobryon sp. (golden algae) and Microcystis sp. (cyanobacteria). The findings indicate that factors such as DN:DP ratios and temperature variations intricately modulate Uroglena sp. bloom by affecting microbial dynamics, notably competitive interactions. The findings of this study offer further scientific insight into addressing seasonal occurrences of fishy odors in water reservoirs, with particular relevance to the spring season.

Occurrence, virulence, and AMR profile of Vibrio parahaemolyticus isolated from shellfish growing areas located along the southwest coast of India

ABSTRACT Vibrio parahaemolyticus is a leading cause of human gastroenteritis associated with seafood consumption. The present study aimed to investigate the occurrence and risk assessment of V. parahaemolyticus isolated from live Indian black clams, sediment, and water samples collected from shellfish harvesting areas located along the southwest coast of India. Out of the total 72 samples collected, 55.6% revealed the presence of V. parahaemolyticus; the highest occurrence was observed in shellfish samples. The presence of tdh and trh virulence genes was screened by multiplex PCR. Virulence genes could be detected in 25.8% of the strains; 19.35% of them were trh positive and 3.2% were tdh positive, while 3.2% of strains exhibited the coexistence of both virulence genes. Antimicrobial resistance (AMR) of the isolates was determined by the disk diffusion method. About 87% of the strains were multiple drug resistant and exhibited 21 diverse antibiotic resistance patterns. The overall multiple antibiotic resistance (MAR) index values ranged from 0 to 0.8. To the best of our knowledge, this is the first report to document the presence of pathogenic and multidrug-resistant V. parahaemolyticus in shellfish harvesting areas of the Indian subcontinent. The study reveals possible health hazards associated with consuming shellfish harvested from the study area.

Skyrocketing pollution: assessing the environmental fate of July 4th fireworks in New York City.

Pyrotechnic displays often lead to significant increases in poor air quality. The widespread environmental fate-involving air, water, and spatial-temporal analyses-of fireworks-produced pollutants has seldom been investigated. This study examined the environmental fate of pollutants from the largest fireworks event in the U.S.: Macy's Fourth of July Fireworks show in New York City (NYC). Real-time PM2.5 and gravimetric PM2.5 and PM10 were collected at locations along the East River of NYC. Airborne particles were assayed for trace elements (X-ray fluorescence) and organic and elemental carbon (OC/EC). River water samples were evaluated by ICP-MS for heavy-metal water contamination. Spatial-temporal analyses were created using PM2.5 concentrations reported by both EPA and PurpleAir monitoring networks for NYC and 5 other major metropolitan areas. The fireworks event resulted in large increases in PM2.5 mass concentrations at the river-adjacent sampling locations. While background control PM2.5 was 10-15 µg/m3, peak real-time PM2.5 levels exceeded 3000 µg/m3 at one site and 1000 µg/m3 at two other locations. The integrated gravimetric PM2.5 and PM10 concentrations during the fireworks event ranged from 162 to 240 µg/m3 and 252 to 589 µg/m3, respectively. Zn, Pb, Sb, and Cu more than doubled in river water samples taken after the event, while S, K, Ba, Cu, Mg, Fe, Sr, Ti, and Zn increased in airborne PM2.5 from the fireworks. Data from hyperlocal monitoring networks for NYC and other metropolitan areas yielded similar, but generally smaller, increases in PM2.5 levels. Fireworks shows have been associated with environmental contamination. This comprehensive analysis considers the fate of pollutants from the largest annual U.S. pyrotechnic show through air, water, and hyperlocal temporal characterization.

A colorimetric biosensor with infrared sterilization based on CuSe nanoparticles for the detection of E. coli O157:H7 in food samples.

Escherichia coli O157:H7 is a major threat to public health. At present, the detection methods for E. coli O157:H7 mainly include traditional bacterial culture, immunology (enzyme-linked immune-sorbent assay) and molecular biology techniques (polymerase chain reaction). These methods have the limitations of professional operation, waste of time and energy, and high cost. Therefore, we have developed a simple, fast, bactericidal colorimetric biosensor to detect E. coli. O157:H7. The entire process was completed in 80 minutes. The method has been successfully applied to milk and mineral water samples with satisfactory results, proving that the method is an effective method for real-time detection and inactivation of bacteria.

Occurrence of pharmaceutical residues in drinking water: a systematic review.

The aim of the present paper was to give a complete picture on the drinking water contamination by pharmaceutical residues all over the world. For this purpose, a systematic review was carried out for identifying all available research reporting original data resulting by sampling campaign and analysis of "real" drinking water samples to detect pharmaceutical residues. The investigated databases were PubMed, Scopus, and Web of Science. A total of 124 studies were included; among these, 33 did not find target analytes (all below the limit of detection), while the remaining 91 studies reported the presence for one or more compounds, in concentrations ranging from a few units to a few tens of nanograms. The majority of the studies were performed in Europe and the most represented categories were nonsteroidal anti-inflammatory drugs and analgesics. The most common analytical approach used is the preparation and analysis of the samples by solid-phase extraction and chromatography coupled to mass spectrometry. The main implications resulting from our review are the need for (a) further studies aimed to allow more accurate environmental, wildlife, and human health risk assessments and (b) developing integrated policies promoting less environmentally persistent drugs, the reduction of pharmaceuticals in livestock breeding, and the update of wastewater and drinking water treatment plants for a better removal of drugs and their metabolites.

Short high-accuracy tritium data time series for assessing groundwater mean transit times in the vadose and saturated zones of the Luxembourg Sandstone aquifer

Abstract. Among the manifold of environmental tracers at hand, tritium is the only one that can give information on groundwater age within the timescale of 100 years for the entire flow system, i.e., unsaturated and saturated. However, while in the Southern Hemisphere, a single water sample is sufficient for tritium-based young groundwater dating, several tritium measurements spanning multiple years are still needed in the Northern Hemisphere to disentangle the natural cosmogenic tritium input from that caused by the atmospheric thermonuclear weapons tests mainly carried out in the early 1960s. Although it is advised to focus tritium dating on sites where long chronicles of tritium data are available, in this study we tested the potential for short high-accuracy tritium data series (∼4 years) to date groundwater from 35 springs draining the Luxembourg Sandstone aquifer (central western Europe). We determined groundwater mean transit times using the lumped-parameter model approach in a Monte Carlo uncertainty estimation framework to provide uncertainty ranges inherent to the low number of tritium data at hand and their related analytical errors. Our results show that unambiguous groundwater mean transit time assessments cannot be determined solely based on such recent short tritium time series, given that several ranges of mean transit times appeared theoretically possible. Nonetheless we succeeded in discriminating groundwater mean transit times in the vadose and saturated zones of the aquifer through a stepwise decision process guided with several supplementary data. The mean transit time required for water to cross the vadose zone was estimated to be between 0.5±0.5 and 8.1±1.2 years depending on the spring, while for water to flow through the saturated zone, it varied from 5.7±2.4 to 18.9±4.6 years (median ± half of the 5–95 percentile range). Our findings are consistent with both the tritium measurements of individual springs and the hydrogeological context of the study area. We specifically corroborated the dating results using the known hydrogeological properties of the Luxembourg Sandstone aquifer, the hydrochemistry of the studied springs, and their discharge dynamics. When translated into water velocities (which average ∼12 and ∼170 m yr−1 for the vadose and the saturated zones, respectively), the tritium dating results mirrored the horizontal–vertical anisotropy of the aquifer's hydraulic properties caused by the bedded character of the Luxembourg Sandstone. In addition to improving our understanding of water transit times in the Luxembourg Sandstone aquifer, this study demonstrates how it is currently possible to use short tritium time series to date young groundwater bodies at new sites in central Europe.