Sacrificial Reductant Research Articles

Photo-isomerization of the Cyanine Dye Alexa-Fluor 647 (AF-647) in the Context of dSTORM Super-Resolution Microscopy.

Cyanine dyes, as used in super-resolution fluorescence microscopy, undergo light-induced "blinking", enabling localization of fluorophores with spatial resolution beyond the optical diffraction limit. Despite a plethora of studies, the molecular origins of this blinking are not well understood. Here, we examine the photophysical properties of a bio-conjugate cyanine dye (AF-647), used extensively in dSTORM imaging. In the absence of a potent sacrificial reductant, light-induced electron transfer and intermediates formed via the metastable, triplet excited state are considered unlikely to play a significant role in the blinking events. Instead, it is found that, under conditions appropriate to dSTORM microscopy, AF-647 undergoes reversible photo-induced isomerization to at least two long-lived dark species. These photo-isomers are characterized spectroscopically and their interconversion probed by computational means. The first-formed isomer is light sensitive and transforms to a longer-lived species in modest yield that could be involved in dSTORM related blinking. Permanent photobleaching of AF-647 occurs with very low quantum yield and is partially suppressed by the anaerobic redox buffer.

Improving Photocatalysis for the Reduction of CO2 through Non-covalent Supramolecular Assembly.

We report the enhancement of photocatalytic performance by introduction of hydrogen-bonding interactions to a Re bipyridine catalyst and Ru photosensitizer system (ReDAC/RuDAC) by the addition of amide substituents, with carbon monoxide (CO) and carbonate/bicarbonate as products. This system demonstrates a more-than-3-fold increase in turnover number (TONCO = 100 ± 4) and quantum yield (ΦCO = 23.3 ± 0.8%) for CO formation compared to the control system using unsubstituted Ru photosensitizer (RuBPY) and ReDAC (TONCO = 28 ± 4 and ΦCO = 7 ± 1%) in acetonitrile (MeCN) with 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH) as sacrificial reductant. In dimethylformamide (DMF), a solvent that disrupts hydrogen bonds, the ReDAC/RuDAC system showed a decrease in catalytic performance while the control system exhibited an increase, indicating the role of hydrogen bonding in enhancing the photocatalysis for CO2 reduction through supramolecular assembly. The similar properties of RuDAC and RuBPY demonstrated in lifetime measurements, spectroscopic analysis, and electrochemical and spectroelectrochemical studies revealed that the enhancement in photocatalysis is due not to differences in intrinsic properties of the catalyst or photosensitizer, but to hydrogen-bonding interactions between them.

Ni-Catalyzed Reductive Dicarbofunctionalization of Nonactivated Alkenes: Scope and Mechanistic Insights.

Olefins devoid of directing or activating groups have been dicarbofunctionalized here with two electrophilic carbon sources under reductive conditions. Simultaneous formation of one C(sp3)-C(sp3) and one C(sp3)-C(sp2) bond across a variety of unbiased π-systems proceeds with exquisite selectivity by the combination of a Ni catalyst with TDAE as sacrificial reductant. Control experiments and computational studies revealed the feasibility of a radical-based mechanism involving, formally, two interconnected Ni(I)/Ni(III) processes and demonstrated the different ability of Ni(I) species (Ni(I)I vs PhNi(I)) to reduce the C(sp3)-I bond. The role of the reductant was also investigated in depth, suggesting that a one-electron reduction of Ni(II) species to Ni(I) is thermodynamically favored. Further, the preferential activation of alkyl vs aryl halides by ArNi(I) complexes as well as the high affinity of ArNi(II) for secondary over tertiary C-centered radicals explains the lack of undesired homo- and direct coupling products (Ar-Ar, Ar-Alk) in these transformations.

Homoleptic ruthenium complexes with N-heterocyclic carbene ligands as photosensitizers in the photocatalytic generation of H2 from water

There is great interest in the catalytic photoreduction of water to give hydrogen as a fuel to harness solar energy and a series of ruthenium complexes has been synthesized and tested as photosensitizers in this photoreduction process. There are very few precedents for N-heterocyclic carbene complexes in this field. The complexes obtained in this work were of the type [Ru(:CˆNˆC:)2](PF6)2 and [Ru(NˆC:)3](PF6)2 with N-heterocyclic carbene ligands derived from pyridine and imidazole heterocycles with methyl or benzyl substituents. The photophysical properties of the complexes were studied. Some complexes were luminescent and, although the quantum yields were rather low, the lifetimes were quite high (1.5–1.7 μs). The emissive complexes behave as photosensitizers in the generation of H2 using [Co(bpy)3]Cl2 (bpy = 2,2′-bipyridine) as catalyst and triethanolamine (TEOA) as the sacrificial reductant through an oxidative quenching mechanism. The amount of hydrogen obtained was higher for the benzyl derivative.

Selective Aerobic Oxygenation of Tertiary Allylic Alcohols with Molecular Oxygen

AbstractAerobic epoxidation of tertiary allylic alcohols remains a significant challenge. Reported here is an efficient and highly chemoselective copper‐catalyzed epoxidation and semipinacol rearrangement reaction of tertiary allylic alcohols with molecular oxygen. The solvent 1,4‐dioxane activates dioxygen, thereby precluding the addition of a sacrificial reductant.

Selective Aerobic Oxygenation of Tertiary Allylic Alcohols with Molecular Oxygen.

Aerobic epoxidation of tertiary allylic alcohols remains a significant challenge. Reported here is an efficient and highly chemoselective copper-catalyzed epoxidation and semipinacol rearrangement reaction of tertiary allylic alcohols with molecular oxygen. The solvent 1,4-dioxane activates dioxygen, thereby precluding the addition of a sacrificial reductant.

Development of Visible-Light Driven Cu(I) Complex Photosensitizers for Photocatalytic CO2 Reduction.

The visible-light responsive Cu(I)-complex photosensitizers were developed by introducing various aromatic substituents at the 4,7-positions of a 2,9-dimethyl-1,10-phenanthroline (dmp) ligand in a heteroleptic CuI(dmp)(DPEphos)+-type complexes (DPEphos = [2-(diphenylphosphino)phenyl]ether) for photocatalytic CO2 reduction. Introducing biphenyl groups (Bp-) on the dmp ligand enhanced the molar extinction coefficient (ε) of the metal-to-ligand charge transfer (MLCT) band in the visible region (ε = 7,500 M−1cm−1) compared to that of the phenyl (Ph-)-containing analog (ε = 5,700 M−1cm−1 at λmax = 388 nm). However, introducing 4-R-Ph- groups (R = the electron-withdrawing groups NC-, or NO2-) led to a red shift in the band to λmax = 390, 400, and 401 nm, respectively. Single-crystal X-ray analysis showed the Ph- groups were twisted because of the steric repulsion between the 2,6-protons of the Ph- groups and 5,6-protons of the dmp ligand. The result strongly indicated that the π-conjugation effect of the 4-R-Ph- groups is so weak that the lowering of the energy of the dmp π* orbitals is small. However, when 4-R-ph- was substituted by a 5-membered heterorings, there was a larger red shift, leading to an increase in the ε value of the MLCT absorption band. Thus, the substitution to 2-benzofuranyl- groups resulted in visible-light absorption up to 500 nm and a shoulder peak at around 420 nm (ε = 12,300 M−1cm−1) due to the expansion of π-conjugation over the substituted dmp ligand. The photocatalytic reaction for CO2 reduction was tested using the obtained CuI complexes as photosensitizers in the presence of a Fe(dmp)2(NCS)2 catalyst and 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole as a sacrificial reductant, which showed improved CO generation.

Dicopper Dioxygenase Model Immobilized in Mesoporous Silica Nanoparticles for Toluene Oxidation: A Mechanism to Harness Both O Atoms of O2 for Catalysis

Recently, we have reported on a dicopper system (CuIII(μ-O)2CuIII complex immobilized in mesoporous silica nanoparticles) that can mediate the catalytic conversion of toluene into benzaldehyde by O2, in which the oxidizing power of both O atoms is harnessed for catalytic turnover. This is the first example of a CuIII(μ-O)2CuIII complex capable of functioning like a “dioxygenase” in hydrocarbon oxidation. We have undertaken a mechanistic study to clarify how this catalytic conversion is accomplished without the input of sacrificial reductants. While the first O atom in the CuIII(μ-O)2CuIII complex can actively insert into a C–H bond, the second O atom left in the CuII(μ-O)CuII complex is inert. We show that a second molecule of O2 is involved in activating the dicopper catalyst, forming an O2 complex with the CuII(μ-O)CuII intermediate to give a species with the [Cu2O3]2+ core, which then mediates the transfer of the remaining O atom of the original O2 molecule to the organic substrate to complete the cata...

Gold Nanocrystal Etching as a Means of Probing the Dynamic Chemical Environment in Graphene Liquid Cell Electron Microscopy.

Graphene liquid cell electron microscopy has the necessary temporal and spatial resolution to enable the in situ observation of nanoscale dynamics in solution. However, the chemistry of the solution in the liquid cell during imaging is as yet poorly understood due to the generation of a complex mixture of radiolysis products by the electron beam. In this work, the etching trajectories of nanocrystals were used as a probe to determine the effect of the electron beam dose rate and preloaded etchant, FeCl3, on the chemistry of the liquid cell. Initially, illuminating the sample at a low electron beam dose rate generates hydrogen bubbles, providing a reservoir of sacrificial reductant. Increasing the electron beam dose rate leads to a constant etching rate that varies linearly with the electron beam dose rate. Comparing these results with the oxidation potentials of the species in solution, the electron beam likely controls the total concentration of oxidative species in solution and FeCl3 likely controls the relative ratio of oxidative species, independently determining the etching rate and chemical potential of the reaction, respectively. Correlating these liquid cell etching results with the ex situ oxidative etching of gold nanocrystals using FeCl3 provides further insight into the liquid cell chemistry while corroborating the liquid cell dynamics with ex situ synthetic behavior. This understanding of the chemistry in the liquid cell will allow researchers to better control the liquid cell electron microscopy environment, allowing new nanoscale materials science experiments to be conducted systematically in a reproducible manner.

CO2 capture and sequestration in stable Ca-oxalate, via Ca-ascorbate promoted green reaction

The increase in the amount of carbon dioxide (CO2) emissions related to many anthropic activities is a persistent and growing problem. During the last years, many solutions have been set out, none of them being the ultimate one. Investigators agree on the need of a synergic approach to the problem, in terms of many complementary methods of sequestration that, combined with the reduction of production, will be able to decrease the concentration of the CO2 in the atmosphere. In this work, we explore the use of a green reaction to trap the CO2 into a stable crystalline phase (weddellite) resorting to a multidisciplinary approach. CO2 is reduced and precipitated as calcium oxalate through vitamin C as a sacrificial reductant. Calcium oxalate crystals obtained show a startling good quality that increases their already great stability over a wide chemical and physical conditions' range.

Engineering a CsPbBr3-based nanocomposite for efficient photocatalytic CO2 reduction: improved charge separation concomitant with increased activity sites.

Metal-halide perovskite nanocrystals have emerged as one of the promising photocatalysts in the photocatalysis field owing to their low-cost and excellent optoelectronic properties. However, this type of nanocrystals generally displays low activity in photocatalytic CO2 reduction owing to the lack of intrinsic catalytic sites and insufficient charge separation. Herein, we functionalized CsPbBr3 nanocrystals with graphitic carbon nitride, containing titanium-oxide species (TiO-CN) to develop an efficient composite catalyst system for photocatalytic CO2 reduction using water as the electron source. Compared to its congener with pristine CsPbBr3, the introduction of TiO-CN could not only increase the number of active sites, but also led to a swift interfacial charge separation between CsPbBr3 and TiO-CN due to their favorable energy-offsets and strong chemical bonding behaviors, which endowed this composite system with an obviously enhanced photocatalytic activity in the reduction of CO2 to CO with water as the sacrificial reductant. Over 3-fold and 6-fold higher activities than those of pristine CsPbBr3 nanocrystals and TiO-CN nanosheets, respectively, were observed under visible light irradiation. Our study provides an effective strategy for improving the photocatalytic activity of metal-halide perovskite nanocrystals, thus promoting their photocatalytic application in the field of artificial photosynthesis.

Two-site H2O2 photo-oxidation on haematite photoanodes

H2O2 is a sacrificial reductant that is often used as a hole scavenger to gain insight into photoanode properties. Here we show a distinct mechanism of H2O2 photo-oxidation on haematite (α-Fe2O3) photoanodes. We found that the photocurrent voltammograms display non-monotonous behaviour upon varying the H2O2 concentration, which is not in accord with a linear surface reaction mechanism that involves a single reaction site as in Eley–Rideal reactions. We postulate a nonlinear kinetic mechanism that involves concerted interaction between adions induced by H2O2 deprotonation in the alkaline solution with adjacent intermediate species of the water photo-oxidation reaction, thereby involving two reaction sites as in Langmuir–Hinshelwood reactions. The devised kinetic model reproduces our main observations and predicts coexistence of two surface reaction paths (bi-stability) in a certain range of potentials and H2O2 concentrations. This prediction is confirmed experimentally by observing a hysteresis loop in the photocurrent voltammogram measured in the predicted coexistence range.

Solvent-free aerobic epoxidation of 1-decene using supported cobalt catalysts

In this study, active cobalt-based catalysts are reported for the solvent-free aerobic epoxidation of 1-decene as a non-noble metal, alternative to the conventionally used gold catalyst. No sacrificial reductant is applied and air is used as primary oxidant at ambient pressure. The influence of different radical initiators and the product distribution over time is investigated. Evidence for a reaction mechanism similar to the previously reported gold-catalysed aerobic epoxidation of 1-decene, is given. Furthermore, it is shown that the catalyst stability is influenced by the choice of the support.

Light-Activated Electron Transfer and Turnover in Ru-Modified Aldehyde Deformylating Oxygenases.

Conversion of biological molecules into fuels or other useful chemicals is an ongoing chemical challenge. One class of enzymes that has received attention for such applications is aldehyde deformylating oxygenase (ADO) enzymes. These enzymes convert aliphatic aldehydes to the alkanes and formate. In this work, we prepared and investigated ADO enzymes modified with RuII(tris-diimine) photosensitizers as a starting point for probing intramolecular electron transfer events. Three variants were prepared, with RuII-modification at the wild type (WT) residue C70, at the R62C site in one mutant ADO, and at both C62 and C70 in a second mutant ADO protein. The single-site modification of WT ADO at C70 using a cysteine-reactive label is an important observation and opens a way forward for new studies of electron flow, mechanism, and redox catalysis in ADO. These Ru-ADO constructs can perform the ADO catalytic cycle in the presence of light and a sacrificial reductant. In this work, the Ru photosensitizer serves as a tethered, artificial reductase that promotes turnover of aldehyde substrates with different carbon chain lengths. Peroxide side products were detected for shorter chain aldehydes, concomitant with less productive turnover. Analysis using semiclassical electron transfer theory supports proposals for hopping pathway for electron flow in WT ADO and in our new Ru-ADO proteins.

A Zirconium Photosensitizer with a Long-Lived Excited State: Mechanistic Insight into Photoinduced Single-Electron Transfer

Time-resolved emission spectroscopy for the luminescent zirconium complex Zr(MePDP)2 (MePDP = 2,6-bis(5-methyl-3-phenyl-1 H-pyrrol-2-yl)pyridine) revealed a long-lived excited state with a lifetime τ = 325 ± 10 μs. Computational studies using time-dependent density functional theory were conducted to identify the nature of the luminescent excited state as a mixed triplet intraligand/ligand-to-metal charge-transfer state. Stern-Volmer experiments showed a strong dependence of the quenching rate on the redox potential of the quencher indicating photoinduced single-electron transfer (SET) as the quenching pathway. Mechanistic investigations of the photocatalytic homocoupling of benzyl bromide allowed the detection of organic radical intermediates during turnover and provided further evidence for SET mediated by Zr(MePDP)2. Isolation of the one-electron-reduced form of the photosensitizer, [Zr(MePDP)2]-, enabled studies of its electronic structure by a combination of experimental and computational techniques and confirmed its role as a strong reductant. Additionally, the role of the benzimidazolium hydride derivatives as two-electron sacrificial reductants during photoredox catalysis was investigated. In combination, the results presented in this report establish a detailed mechanistic picture of a photoredox catalytic reaction promoted by an earth-abundant early transition metal photosensitizer.

Convenient Photochemical Synthesis of Silver‐Polyaminocyclodextrin Nanocomposites: The Role of the Light Source from a Mechanistic Viewpoint

AbstractAn investigation on the light‐driven reduction of the [Ag(NH3)2]+ complex in the presence of polyaminocyclodextrins was carried out, in order to clarify the mechanism of the process. The role of the organic auxiliary as both the sacrificial reductant and the capping agent was positively assessed. Moreover, particular attention was paid to the role of the irradiation source. Experimental results indicate that a complex mechanism is involved in the formation of the nanocomposite, with a primary photoinduced single‐electron‐transfer process promoted by irradiation with green light, followed by a secondary chemical reduction process activated by NIR. Representative composites were characterized by means of FTIR, TEM and SAED techniques. The light‐driven approach proposed here appears an appealing “green”, bio‐friendly method for the synthesis of stable nanosized silver composites, in view of possible applications as antimicrobial agents.

Infrared Light-Driven CO2 Overall Splitting at Room Temperature

Summary To date, infrared (IR) light constituting almost 50% of the solar energy has never been utilized, owing to an insurmountable contradiction between IR light utilization and CO 2 photoreduction. To break through this limitation, we designed an ultrathin intermediate-band semiconductor, and hence first realized IR-driven CO 2 overall splitting on a single material without using any sacrificial reductants. Taking the synthetic ultrathin cubic-WO 3 layers as an example, theoretical calculations disclose that the created oxygen vacancies reaching a critical density results in an intermediate band, verified by synchrotron-radiation valence-band spectra, photoluminescence spectra, UV-vis-NIR spectra, and synchrotron-radiation IR reflectance spectra. As a result, the oxygen-deficient WO 3 atomic layers display IR-driven CO 2 overall splitting to CO and O 2 , while their catalytic activity proceeds without deactivation even after 3 days. Also, the higher oxygen vacancy concentration favors CO 2 adsorption and activation into COOH* radical, affirmed by CO 2 temperature-programmed desorption spectra and in situ FTIR spectra, hence guaranteeing increased CO and O 2 formation rates.

New tricks for an old dog: Visible light-driven hydrogen production from water catalyzed by fac- and mer- geometrical isomers of tris(thiosemicarbazide) cobalt(III)

Increasing interest has been paid to the development of earth-abundant metal complexes as promising surrogates of platinum for the electrocatalytically and photocatalytically driven hydrogen evolution reaction. In this work, we report on molecular H2-evolving catalysts based on two octahedral complexes of cobalt thiosemicarbazide, fac-[Co(Htsc)3]Cl3·3H2O (C1, Htsc = thiosemicarbazide) and mer-[Co(Htsc)3]Cl3·4H2O (C2), which have facial (fac) and meridional (mer) geometry, respectively. Electrochemical studies confirmed that both C1 and C2 are active electrocatalysts in MeOH solution using acetic acid as the proton source, with the same overpotential of ∼ 640 mV and TOF of ∼ 210 s−1. The complex C1 also exhibits electrocatalytic activity for hydrogen evolution reaction in aqueous media free of organic solvent with a moderate overpotential (560 mV). Visible light-driven hydrogen evolution experiments were carried out in combination with fluorescein as photosensitizer and triethylamine as sacrificial reductant in homogeneous environments. Our studies showed that both C1 and C2 can be used as efficient proton-reduction catalysts in purely aqueous solution and have the same photocatalytic activities. A TOF of 125 h−1 with a TON of 900 for photocatalytic H2 generation using C1 and C2 in water were achieved for the noble-metal-free homogeneous system. It should be noted that this is the first reported study investigating the effect on the catalytic hydrogen production performance of using fac- and mer-isomers of molecular catalysts.

A Copper(II) Molecular Catalyst for Efficient and Selective Photochemical Reduction of CO2 to CO in a Water-Containing System.

A catalyst developed from a CuII complex of (Et4 N)[Cu(pyN2Me2 )(HCO2 )]⋅0.5 CH3 OH⋅H2 O (1⋅0.5 CH3 OH⋅H2 O; pyN2Me2 =bis(2,6-dimethylphenyl)-2,6-pyridinedicarboxamidate(2-)) shows a high activity to catalyze the reduction reaction of CO2 to CO driven by visible light in 4:1 acetonitrile/water (v:v) using [Ru(phen)3 ](PF6 )2 as photosensitizer and TEOA as sacrificial reductant, with a high TON of 9900 and a high CO selectivity of 98 %. The results of isotope labeling experiment, durability tests and energy dispersive spectroscopy reveal that 1 is robust during the photocatalytic process.

Cationic Bis(cyclometalated) Ir(III) Complexes with Pyridine-Carbene Ligands. Photophysical Properties and Photocatalytic Hydrogen Production from Water.

Precursors of chelate pyridine-N-heterocyclic carbene (N^C:) ligands with methyl- or benzyl-substituted imidazolylidene fragments were synthesized. They were used to obtain 12 iridium bis-cyclometalated complexes of the type [Ir(C^N)2(N^C:)]+ (C^N = 2-(phenyl)pyridinato-C2,N, ppy, 2-(4,6-difluorophenyl)pyridinato-C2,N, dfppy). The ancillary N^C: ligands contain different structural modifications. The aim of the work was to analyze the effect that changes in the two types of ligands have on the photophysical and electrochemical properties and also on the behavior of these materials as photosensitizers. The X-ray crystal structures of five complexes were determined. The complexes emitted in the blue-green region. It was expected that the frontier orbitals and thus the photophysical and electrochemical properties would be controlled by the main C^N ligands, and it was demonstrated that the effect of the modifications in the N^C: ligand, especially the presence of a nitro group in the pyridine ring or the interruption of conjugation between the two rings, also affected these properties. The quenching with O2 and photostability studies were also performed. Density functional theory calculations were used to explain the behavior of some derivatives. The complexes and other previously reported compounds were employed as photosensitizers (PS) in preliminary studies on the production of H2 from water using [Co(bpy)3]Cl2 (bpy = 2,2'-bipyridine) as catalyst and triethanolamine (TEOA) as the sacrificial reductant. The absence of quenching of the PS with TEOA allowed us to propose an oxidative quenching mechanism.