Room Temperature Research Articles

Spectroscopic Properties and Reactivity of a MnIII-hydroperoxo Complex that is Stable at Room Temperature.

Manganese catalysts that activate hydrogen peroxide have seen increased use in organic transformations, such as olefin epoxidation and alkane C-H bond oxidation. Proposed mechanisms for these catalysts involve the formation and activation of MnIII-hydroperoxo intermediates. Examples of well-defined MnIII-hydroperoxo complexes are rare, and the properties of these species are often inferred from MnIIIalkylperoxo analogues. In this study, we show that the reaction of the MnIII-hydroxo complex [MnIII(OH)(6Medpaq)]+ (1) with hydrogen peroxide and acid results in the formation of a dark-green MnIII-hydroperoxo species [MnIII(OOH)(6Medpaq)]+ (2). The formulation of 2 is based on electronic absorption, 1H NMR, IR, and ESI-MS data. The thermal decay of 2 follows a first order process, and variable-temperature kinetic studies of the decay of 2 yielded activation parameters that could be compared with those of a MnIII-alkylperoxo analogue. Complex 2 reacts with the hydrogen-atom donor TEMPOH two-fold faster than the MnIII-hydroxo complex 1. Complex 2 also oxidizes PPh3, and this MnIII-hydroperoxo species is 600-fold more reactive with this substrate than its MnIII-alkylperoxo analogue [MnIII(OOtBu)(6Medpaq)]+. DFT and time-dependent (TD) DFT computations are used to compare the electronic structure of 2 with similar MnIII-hydroperoxo and MnIII-alkylperoxo complexes.

Tough supramolecular hydrogels of poly(N,N-dimethylacrylamide)-grafted poly(methacrylic acid) with cooperative hydrogen bonds as physical crosslinks.

Incorporating associative interactions as the energy dissipation units has been recognized as an effective strategy to develop tough hydrogels. For hydrogen-bond associations, however, it is highly challenging to stabilize them under aqueous conditions. Although affording cooperativity can enhance and stabilize the hydrogen bonds, it usually requires stepwise polymerization to form these cooperative associations between different polymers and networks. Here, we report a series of tough supramolecular hydrogels with robust hydrogen-bond associations between grafted polymers that are synthesized by polymerization of a macromonomer of poly(N,N-dimethylacrylamide) (PDMAA) and a small monomer of methacrylic acid. The grafted chains of PDMAA form cooperative hydrogen bonds with the main chain of poly(methacrylic acid) (PMAAc), forming supramolecular hydrogels with high toughness and good stability. The tough and stiff hydrogels are in a glassy state, exhibit forced elastic deformation at room temperature, and remain stable over a wide pH range. In contrast, hydrogels prepared by the copolymerization of DMAA and MAAc are swollen and weak in water due to the lack of successive hydrogen donor/acceptor units and the absence of cooperative hydrogen bonds. In addition, these tough hydrogels exhibit good recyclability and shape memory properties, owing to the supramolecular nature of the network and the temperature-dependent mechanical properties. The influence of polymer structure on the associative interactions and macroscopic properties of the hydrogels should be informative for the design of tough soft materials with versatile applications.

Dissolution of EAF slag minerals in aqueous media: Effects of sonication on brownmillerite and gehlenite

The accumulation of electric arc furnace slag (EAFS) in landfills has been causing severe environmental problems. This study examines the dissolution properties of EAFS minerals, including brownmillerite and gehlenite, essential for their possible use in resource recovery. An investigation was conducted to compare the effects of sonication and stirring on mineral dissolution while also assessing the usage of citrate as a complexing agent for gehlenite. Synthetic brownmillerite and gehlenite minerals were dissolved in aqueous solutions at room temperature using a 1:100 g/ml ratio. The dissolved elements were measured using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES), while zeta potential and X-ray Photoelectron Spectroscopy (XPS) were used to assess changes in surface chemistry. Brownmillerite had significant dissolution extents, with Al and Ca dissolving up to 16 % and 8 %, respectively, in contrast to gehlenite, which dissolved less than 2 % under similar conditions. Sonication significantly increased the dissolution of brownmillerite by up to 100 %, although its impact on gehlenite dissolution varied depending on the duration of time. Besides, adding citrate enhanced the leaching of Al and Ca from gehlenite by facilitating complexation. XPS data demonstrated differences in elemental ratios on brownmillerite and gehlenite surfaces affected by the method used and the presence of citrate. Lastly, the dissolution extents of Al and Ca from EAFS were up to 12 %, depending on time and mixing method, with a preference for sonication over stirring. In conclusion, this study showed that minerals in EAFS have distinct dissolution characteristics, and sonication and citrate can considerably enhance dissolution.

Single ZnO Nanowire for Electrical and Optical NO2 Gas Sensing: Origin of Reversible and Irreversible Gas Effects Investigated by Photoluminescence Spectroscopy.

In this work, the gas sensing properties of a single ZnO nanowire (NW) are investigated, simultaneously in terms of photoluminescence (PL) and photocurrent (PC) response to NO2 gas, with the purpose of giving new insights on the gas sensing mechanism of a single 1D ZnO nanostructure. A single ZnO NW sensing device was fabricated, characterized, and compared with a sample made of bundles of ZnO NWs. UV near-band-edge PL emission spectroscopy was carried out at room temperature and by lowering the temperature down to 77 K, which allows detection of resolved PL peaks related to different excitonic transition regions. Surface effects were observed in PL maps, considering different nano and microstructures. Electrical and optical measurements were acquired at the same time during the NO2 gas exposure, allowing for the comparison of PL and PC response times and signal recovery. During NO2 gas desorption, irreversible behavior in the surface-related and donor-acceptor pair (DAP) regions is interpreted as the effect of an initial transient when electronic transfer from the gas molecules to the bulk occurs through the ZnO NW surface which acts as a channel. To the best of our knowledge, this is the first work which investigates the simultaneous PL optical and PC electrical response signals of a single ZnO NW to gas exposure.

Energy transfer processes leading to strong NIR-to-red upconversion in the Yb-concentrated Sr3Yb0.98Er0.02(PO4)3 eulytite

The optical spectroscopy and the decay kinetics of samples with composition Sr3Yb(PO4)3, Sr3Y0.98Yb0.02(PO4)3, Sr3Y0.98Er0.02(PO4)3 and Sr3Yb0.98Er0.02(PO4)3 have been studied at room temperature. The presence of efficient energy transfer and migration processes has been clearly evidenced in the Sr3Yb(PO4)3 and Sr3Yb0.98Er0.02(PO4)3 materials, giving rise to strong visible upconversion upon excitation in the spectral region around 1 μm in the latter material. The strong anti-Stokes emission is connected to fast migration in the 2F5/2 level of Yb3+, due to the inefficient concentration quenching for this ion. In this class of materials, the upconversion processes could be optimized even in the presence of high concentrations of the Yb3+ sensitizer.

Thermoluminescence (TL) properties of Eu3+ incorporated with CaB4O7 phosphors prepared by solution-combustion process

The solution-combustion approach was used to create CaB4O7:Eu3+phosphors using Ba (NO3)2, Eu (NO3)3·5H2O, H3BO3, NH3(ON)H2, and NH4NO3 as source materials. We investigated the thermoluminescence (TL) characteristics of beta (β)-irradiated CaB4O7:Eu3+. When the TL intensity was evaluated at different dosages of β, it rose with the dose. Changes in peak temperature were observed because of the investigation of the effects of varying heating rates on TL glow curves. Moreover, the positions of the peak temperature and the TL intensity did not change when the same sample was measured again, suggesting that the sample was stable. Additionally, the study calculated several kinetic parameters, including activation energy (E), frequency factor (s), and geometrical factor (μg), for distinct TL glow curves. Through geometric analysis of TL glow peaks, the study determined activation energies and kinetic orders, enabling the calculation of the frequency factor. The findings highlight the suitability of the prepared phosphor for dosimetry and provide insights into trap characteristics crucial for continuous illumination at room temperature. The study also emphasises the importance of optimising trap depth for prolonged afterglow, shedding light on the interplay between trap energies and luminescence characteristics. These findings deepen our comprehension of phosphor behavior and open the door to better dosimetry applications.

Highly efficient and thermally stable photonic ceramic by controllable and full crystallization from glass

Polycrystalline ceramics are promising for a diverse range of applications in solid state laser, lighting, scintillator and optical storage. Unfortunately, current ceramic elaborations involves strict and complex synthetic procedures such as ultra-high pressure and vacuum processing. Here, we realize the tune of MgAl2Si4O12 and Mg2Al4Si5O18 phase formation in a glass by controlling the two crystal nucleation and growth individually, and obtain a polycrystalline non-stoichiometric Mg2-x/2Al4-xSi5+xO18:Eu2+ translucent ceramic by virtue of complete and congruent crystallization of the glass. Microstructural characterizations verify that the resulting ceramic exhibits dense and closely stacked micrometer-scale crystallites with very thin grain boundary structure. Chemical composition analysis by energy dispersive X-ray spectrometry revels the grain's composition is highly deviated from the stoichiometric Mg2Al4Si5O18, with atomic ratio Mg/Al/Si of 1.00: 1.46: 2.70. The precipitated non-stoichiometric Mg2-x/2Al4-xSi5+xO18, structurally having infinite channels z = 0.25 or 0.75 sites that run parallel to the c-aix, provides an robust crystal-field environment for Eu2+ 5d-4f transition. As a consequence, the ceramic produces intense emission with photoluminescence quantum yield (PLQY) up to 90 %, and excellent thermal stability emission with 70.1 % emission intensity at 420 K relative to that at room temperature, demonstrating it can be applied in high power lighting application with improved light quality by employing the ceramic as a color converter. Moreover, the ceramic also exhibits thermally stimulated luminescence at temperature reaching up to 700 K, originating from the deep electronic traps in Mg2-x/2Al4-xSi5+xO18 lattice with estimated trap depth of 0.73eV and 0.97eV. We also demonstrate the ceramic is hopeful for optical information storage application as the storage information can be retain well without vulnerable by the fluctuations of external environments due to the deep traps.

Structure, impedance spectroscopy, and magnetic properties of nanostructured composites (1-x)CoFe2O4–xPbTiO3

The article presents a comprehensive investigation of the crystal structure, impedance spectra, magnetic, magnetodielectric, and magnetoresistive properties of (1-x)CoFe2O4–xPbTiO3 composites with varying concentrations (х = 0, 0.2, 0.4, and 0.6). The study also examines the effects of applying a uniaxial pressure of 1 GPa to the synthesized powders using Bridgman anvils. Our findings reveal that the synthesis of these composites results in the formation of an additional phase, lead hexaferrite PbFe12O19, which exhibits multiferroic properties. Additionally, the coherent scattering region of the components is significantly reduced after mechanical activation. Notably, the real part of the resistivity ρ′(ω) of nanostructured CoFe2O4 ceramics increases eightfold at T = 240 °C. The composites demonstrate significant magnetoresistance at room temperature, reaching up to 250 %. The study also reveals that the signs of the magnetodielectric MD(B) and magnetoresistive coefficient MR(B) vary with the frequency of the measuring field for certain concentrations. Using the first-order reversal curve (FORC) method, it was observed that after nanostructuring CoFe2O4 through mechanical activation, the interaction field Hu shifts from ± 0.6 kOe to ± 0.8 kOe, while the coercive field Hc increases from 1.05 kOe to 5 kOe. Moreover, the two-dimensional FORC maps of the composites show increased complexity, due to the formation of additional magnetic phases.

Green One-Pot Synthesis Of Disubstituted Coumarine At Room Temperature: A Practical Approach For The Large-Scale Synthesis

Green One-Pot Synthesis Of Disubstituted Coumarine At Room Temperature: A Practical Approach For The Large-Scale Synthesis

Surface Degradation of Mg2X-Based Composites at Room Temperature: Assessing Grain Boundary and Bulk Diffusion Using Atomic Force Microscopy and Scanning Electron Microscopy.

Practical application of thermoelectric generators necessitates materials that combine high heat-to-electricity conversion efficiency with long-term functional stability under operation conditions. While Mg2(Si,Sn)-based materials exhibit promising thermoelectric properties and module prototypes have been demonstrated, their stability remains a challenge, demanding thorough investigation. Utilizing atomic force microscopy (AFM) and scanning electron microscopy (SEM), we investigate the surface degradation of a composite material comprising Si-rich and Sn-rich Mg2(Si,Sn) solid solutions. The investigation reveals a pronounced dependence of stability on Sn content, with the Sn-rich phase Mg2Si0.13Sn0.87 displaying the formation of a nonprotective oxide layer. Subsequent AFM measurements provide evidence of dominating grain boundary diffusion of loosely bound Mg, compared to bulk diffusion, observed within a few days, ultimately resulting in a complete surface oxidation of the Sn-rich phase within several weeks. On the other hand, Mg2Si and Si-rich Mg2Si0.80±0.05Sn0.20±0.05 remain stable against Mg diffusion to the surface even after prolonged exposure. Comparison with previous investigations confirms that the degradation rate is found to be highly dependent on the Sn content, with markedly higher rates observed for x = 0.87 compared to x = 0.70 in Mg2Si1-xSnx. These findings contribute to a better understanding of the stability challenges associated with Mg2(Si,Sn)-based materials, essential for the development of robust thermoelectric materials for practical applications.

Physical Virtualization of a GFET for a Versatile, High‐Throughput, and Highly Discriminating Detection of Target Gas Molecules at Room Temperature

Physical Virtualization of a GFET for a Versatile, High‐Throughput, and Highly Discriminating Detection of Target Gas Molecules at Room Temperature

Optical Cooling of Dot-in-Crystal Halide Perovskites: Challenges of Nonlinear Exciton Recombination.

Highly efficient anti-Stokes (AS) photoluminescence (PL) is observed from halide perovskite quantum dots (QDs) due to their strong electron-phonon interactions. The AS PL is particularly intriguing, as it suggests the potential for semiconductor optical cooling if the external quantum efficiency approaches 100%. However, the PL quantum efficiency in QDs is primarily dominated by multiparticle nonradiative Auger recombination processes under intense photoexcitation, which impose limits on the optical cooling gain. Here, we investigate the Auger recombination of dot-in-crystal perovskites. We quantitatively estimate the maximum optical cooling gain and the corresponding excitation intensity. We further conducted optical cooling experiments and demonstrate a maximum photocooling of approximately 9 K from room temperature. Additionally, we confirmed that increasing the excitation intensity leads to a transition from photocooling to photoheating. These observations are consistent with our time-resolved measurements, offering insights into the potential and limitations of optical cooling in semiconductor QDs.

Excellent thermoelectric performance in alkali metal phosphides M3P (M = Na and K) with phonon-glass electron-crystal like behaviour.

Identifying ideal thermoelectric materials presents a formidable challenge due to the intricate coupling relationship between thermal conductivity and power factor. Here, based on first-principles calculations, along with self-consistent phonon theory and the Boltzmann transport equation, we theoretically investigate the thermoelectric properties of alkali metal phosphides M3P (M = Na and K). The evident 'avoided crossing' phenomenon indicates the phonon glass behavior of M3P (M = Na and K). Due to the strong lattice anharmonicity induced by alkali metal elements, accounting for quartic anharmonic corrections, the lattice thermal conductivities of Na3P and K3P at room temperature are merely 0.25 and 0.12 W m-1 K-1, respectively. Furthermore, the high degeneracy and 'pudding-mold-type' band structure lead to high p-type PF in M3P (M = Na and K). At 300 K, the p-type power factors (PF) of Na3P and K3P can reach 3.90 and 0.80 mW mK-2, respectively. The combination of ultralow κL and high PF leads to excellent thermoelectric figure of merit (ZT) values of 1.70 (3.38) and 1.18 (2.13) for p-type Na3P and K3P under optimal doping concentration at 300 K (500 K), respectively, surpassing traditional thermoelectric materials. These findings demonstrate that M3P (M = Na and K) exhibits behavior similar to phonon-glass electron crystals, thereby indicating a direction for the search for high-performance thermoelectric materials.

Synthesis of fullerite (100) through epitaxy on a complex intermetallic surface

We report the first epitaxial growth of bulk-like C60(100) plane stabilized by a size-matching effect on the surface of a complex intermetallic compound. As characterized by low energy electron diffraction (LEED) and scanning tunneling microscopy (STM) techniques, the adsorption of C60 on Au–Si–Ho(100) surface is disordered at room temperature but ordered when the substrate is held at elevated temperature (669 K). In the submonolayer regime, different superstructures are observed depending on the fullerenes coverage. Upon completion of the first monolayer of C60, the thin film of c(1 × 1) superstructure is structurally equivalent to a (100) surface plane of the face-centered cubic structure of C60 bulk crystal. This structure is unusual for C60 monolayers on metal surfaces and appears to be favored by an almost perfect match between the most preferred C60 intermolecular distance and the distances separating specific adsorption sites of the large unit cell compound. The adsorption site selection is dictated by a local symmetry matching between the pentagonal fullerene facets and pseudo-five-fold symmetric atomic arrangements on the substrate. After the completion of the first monolayer, further deposition of C60 at 387 K results in the growth of a (100) oriented thicker epitaxial fullerite crystal.

Effect of thermal treatment and secondary bonds on the storage stability of ready-to-eat sea cucumbers

Ready-to-eat sea cucumbers (RSC) are highly sensitive to quality deterioration during storage at room temperature. The study investigated the anti-deterioration effects of high-pressure steam sterilization (HPSS) and high-temperature boiling (HTB) on RSC, as well as the impact of secondary bonds on HTB-treated RSC. The results indicated that there were no significant changes in the secondary structure following thermal treatment. Compared to day 0, the maximum thermal denaturation temperature of collagen in the control (CT) group decreased by 24.49℃, while decreases in the HPSS and HTB groups were 8.53℃ and 9.8℃, respectively. This confirmed that the stabilization of RSC could be enhanced through HPSS and HTB treatment during storage. When hydrogen bonds are destroyed, the texture properties of HTB-treated RSC significantly decrease, with hardness values dropping to 3.65±0.514 N and 2.41±0.615 N, springiness to 7.52±1.342 mm and 7.69±0.066 mm, and chewiness to 19.7±1.211 mj and 16.6±1.837 mj, respectively. Furthermore, the degradation of collagen fibers due to the breaking of hydrogen bonds prior to storage was more pronounced. These findings indicate that hydrogen bonds play a crucial role in maintaining the storage stability of RSC. These results offer a theoretical foundation and technical assistance for the processing and storage of RSC.

Mining for antifungal agents to inhibit biofilm formation of Candida albicans: A study on green synthesis, antibiofilm, cytotoxicity, and in silico ADME analysis of 2-amino-4H-pyran-3-carbonitrile derivatives

Candida albicans (C. albicans) biofilm infections are quite difficult to manage due to their resistance against conventional antifungal drugs. To address this issue, there is a desperate need for new therapeutic drugs. In the present study, a green and efficient protocol has been developed for the synthesis of 2-amino-4H-pyran-3-carbonitrile scaffolds 4a-i, 6a-j, and 8a-g by Knoevenagel-Michael-cyclocondensation reaction between aldehydes, malononitrile, and diverse enolizable C-H activated acidic compounds using guanidinium carbonate as a catalyst either under grinding conditions or by stirring at room temperature. This protocol is operationally simple, rapid, inexpensive, has easy workup and column-free purification. A further investigation of the synthesized compounds was conducted to examine their antifungal potential and their ability to inhibit the growth and development of biofilm-forming yeasts like fungus C. albicans. According to our findings, 4b, 4d, 4e, 6e, 6f, 6g, 6i, 8c, 8d, and 8g were found to be active and potential inhibitors for biofilm infection causing C. albicans. The inhibition of biofilm by active compounds were observed using field emission scanning electron microscopy (FESEM). Biofilm inhibiting compounds were also tested for in vitro toxicity by using 3T3-L1 cell line, and 4b, 6e, 6f, 6g, 6i, 8c, and 8d were found to be biocompatible. Furthermore, the in silico ADME descriptors revealed drug-like properties with no violation of Lipinski's rule of five. Hence, the result suggested that synthesized derivatives could serve as a useful aid in the development of novel antifungal compounds for the treatment of fungal infections and virulence in C. albicans.

Controlled Ring-Opening Polymerization of Methyl Glycolide with Bifunctional Organocatalyst.

A bifunctional thiourea-amine-based organocatalyst (Takemoto's catalyst), employing a metal-free approach, is presented for the regioselective ring-opening polymerization (ROP) of optically active (D and L) methyl glycolide (MG). In this study, a chiral version of Takemoto's catalyst efficiently promotes the ROP of MG at room temperature, yielding poly(lactic-co-glycolic acids) (PLGAs) with predicted molecular weights and narrow polydispersity indices (PDI≤1.2). These PLGAs exhibit highly alternating structures without transesterification, as confirmed by 1H NMR, SEC, and MALDI-TOF analyses. Additionally, various macromolecular architectures, including linear and star-shaped PLGAs, were successfully synthesized using corresponding multi-functional alcohol initiators while maintaining the same alternating structures and regioselectivity with PLGA obtained from benzyl alcohol as initiator. Computational studies were conducted to elucidate the mechanism of alternating PLGA formation, revealing two key transition states (TSs): TS-1, which implicates the nucleophilic attack of the hydroxyl group of the initiator or propagating chain on the carbonyl carbon of MG, and TS-2, which involves the subsequent ring-opening of the cyclic ester. The results indicate that ring-opening occurs at both the glycolyl and lactyl sites, with a preference for the glycolyl site, as supported by experimental results. The resulting atactic PLGAs are amorphous, rendering them suitable for drug delivery applications.

Egg shell powder mediated Cu catalyst: A biowaste based catalytic approach for the synthesis of quinazolin-4(3H)-ones and propargyl amines

A novel and efficient approach for a tandem oxidative synthesis of quinazolin-4(3H)-one from 2-aminobenzonitrile and benzyl alcohol has been unveiled via Cu2(CO3)(OH)2. Herein CuSO4.5H2O accompanied by egg shell powder is used for the easy preparation of Cu2(CO3)(OH)2. The reported method portrays a wide range of substrate scope with good to excellent yield and the given reaction proceed at room temperature within 12 h. Single crystal of one of the synthesized quinazolin-4(3H)-ones was analysed through single crystal X-ray diffraction (SC-XRD). Some of the compounds reported here are also known to possess various pharmaceutical activities. Eventually the newly prepared catalyst was applied for propargylamine synthesis via a multi component reaction. Perceiving all the advantages, present protocol is conceivably considered as clean, cost-effective and sustainable over reported procedures used for synthesis of quinazolin-4(3H)-ones and propargyl amines.

Effect of thermal resistance and infrared transparency on radiative cooling efficiency

Radiative cooling materials that reflect sunlight and emit infrared light to the cold sky can lower the surface temperatures of building envelopes, reducing cooling energy usage by buildings. Over the last decade, various structures, such as thin films/coatings and thick infrared-transparent/opaque foams, have been developed for these applications. Understanding the influence of thermal resistance and infrared transparency of radiative cooling materials, along with the thermal resistance of the substrate to which they are applied, is vital for optimizing their energy savings potential. Herein, we employed a heat transfer model that integrates conduction, convection, and radiation to investigate the energy savings of radiative cooling materials with varying roof and material thermal resistances. Our results suggest that radiative cooling materials are most effective on roofs with low thermal resistance, like metal roofs, and increasing roof thermal resistance reduces their energy-saving effect. Thermally insulating infrared-transparent radiative cooling foams can significantly boost energy savings by minimizing convection and radiation losses. Conversely, compared to thin film, thermally insulating infrared-opaque foams can enhance or reduce energy savings depending on whether their surface temperatures are above or below room temperature. Throughout summer, infrared-transparent foam consistently achieves the highest energy savings, whereas infrared-opaque foam shows the least. This work provides guidance for the practical application and structural design of radiative cooling materials.

A Novel Process for the Separation of Rare Earth Elements to Recover Pure Nd(III) Solution from the NdFeB Magnets

ABSTRACT FeNdB magnets are one of the important secondary resources containing rare earth elements (REEs). The REEs present in FeNdB magnets can be separated from other metals by double salt precipitation. In order to recover pure Nd(III) solution from the double salts, separation experiments were done with the leaching solutions of the double salts containing Ce(III), Nd(III), and Pr(III). The REEs present in the double salts were completely dissolved using 0.5 M HCl solution at room temperature. First, Ce(III) was separated by oxidative precipitation of CeO2 and Ce(OH)4 by using NaClO and NaOH as an oxidizing and neutralizing agent. Complete separation of Ce(III) from the leaching solution of the double salts was possible by controlling solution pH at 5 under the following conditions: 11 for the molar ratio of NaClO/Ce(III) and 400 rpm at 40°C for 60 min. Second, all the Nd(III) and Pr(III) ions present in the filtrate were completely extracted by using saponified D2EHPA. Third, four stages of cross-current scrubbing of the loaded D2EHPA with pure Nd(III) solution removed most of the Pr(III) from the loaded D2EHPA. Finally, pure Nd(III) solution was obtained by stripping the scrubbed D2EHPA with weak HCl solution. The optimum conditions for the extraction, scrubbing, and stripping were obtained. A simple process was proposed to recover Nd(III) solution with purity higher than 99.9% from FeNdB magnets.