Robust Imaging Method Research Articles

Direct and Inverse Scattering Problems for Domains with Multiple Corners

We proposed numerical methods for solving the direct and inverse scattering problems for domains with multiple corners. Both the near field and far field cases are considered. For the forward problem, the challenges of logarithmic singularity from Green’s functions and corner singularity are both taken care of. For the inverse problem, an efficient and robust direct imaging method is proposed. Multiple frequency data are combined to capture details while not losing robustness.

Self-feeding MUSE: A robust method for high resolution diffusion imaging using interleaved EPI

Single-shot echo planar imaging (EPI) with parallel imaging techniques has been well established as the most popular method for clinical diffusion imaging, due to its fast acquisition and motion insensitivity. However, this approach is limited by the relatively low spatial resolution and image distortion. Interleaved EPI is able to break the limitations but the phase variations among different shots must be considered for artifact suppression. The introduction of multiplexed sensitivity-encoding (MUSE) can address the phase issue using sensitivity encoding (SENSE) for self-navigation of each interleave. However, MUSE has suboptimal results when the number of shots is high. To achieve higher spatial resolution and lower geometric distortion, we introduce two new schemes into the MUSE framework: 1) a self-feeding mechanism is adopted by using prior information regularized SENSE in order to obtain reliable phase estimation; and 2) retrospective motion detection and data rejection strategies are performed to exclude unusable data corrupted by severe pulsatile motions. The proposed method is named self-feeding MUSE (SF-MUSE). Experiments on healthy volunteers demonstrate that this new SF-MUSE approach provides more accurate motion-induced phase estimation and fewer artifacts caused by data corruption when compared with the original MUSE method. SF-MUSE is a robust method for high resolution diffusion imaging and suitable for practical applications with reasonable scan time.

CAIPIRINHA-Dixon-TWIST (CDT)-volume-interpolated breath-hold examination (VIBE) for dynamic liver imaging: Comparison of gadoterate meglumine, gadobutrol and gadoxetic acid

PurposeCAIPIRINHA-Dixon-TWIST (CDT)-VIBE is a robust method for abdominal magnetic resonance imaging providing both high spatial and high temporal resolution. The purpose of this study was to examine the influence of different gadolinium based contrast agents (GBCA) on image quality (IQ) with CDT-VIBE. Materials and methodsIn this IRB-approved, retrospective, inter-individual comparison study, 86 patients scanned at 3T were included. Within 28s, 14 high-resolution 3D datasets were acquired using CDT-VIBE. 37 patients received 0.1mmol/kg gadoterate meglumine, 28 patients 0.1mmol/kg gadobutrol, and 19 patients 0.1mL/kg gadoxetic acid. Two blinded, board-certified radiologists assessed the image quality on a 5 point scale, as well as the number of hepatic arterial dominant (HAD) phases. ResultsRegardless of the GBCA utilized, CDT-VIBE resulted in good IQ in terms of best IQ achieved among all 14 datasets (gadobutrol 4.3, gadoterate meglumine 3.9, gadoxetic acid 3.7). With respect to worst IQ, the three groups showed statistically significant differences with gadobutrol receiving the highest rating (3.6) and gadoxetic acid the lowest (2.4) (gadoterate meglumine 3.0; 0.0014<p<0.0485). No statistically significant differences were found in the mean number of acquired HAD phases (gadobutrol 3.4, gadoterate meglumine 3.9, gadoxetic acid 3.1; 0.18<p<0.57). ConclusionDifferent gadolinium-based contrast agents can be utilized for dynamic liver imaging with CDT-VIBE resulting in good image quality.

Radiological diagnostics of multiple myeloma

Robust and reliable imaging methods are required to estimate the skeletal tumor load in multiple myeloma, as well as for the diagnosis of extraskeletal manifestations. Imaging also plays an essential role in the assessment of fracture risk and of vertebral fractures. The conventional skeletal survey has been the gold standard in the imaging of multiple myeloma for many years. Other modalities which have been investigated and are in use are whole-body computed tomography (WBCT), 18F-fluorodeoxyglucose positron emission tomography computed tomography (FDG PET-CT) and whole-body magnetic resonance imaging (WBMRI). These techniques are able to depict both mineralized bone and the bone marrow with a high sensitivity for myeloma lesions. Several studies have shown that cross-sectional imaging is superior to the skeletal survey in the detection of myeloma lesions and WBMRI has been shown to be significantly more sensitive than WBCT for the detection of focal myeloma lesions as well as for diffuse infiltration. The FDG PET-CT technique has a sensitivity comparable to WBMRI. Due to the higher sensitivity in the detection of myeloma lesions WBCT and WBMRI should replace the skeletal survey. A WBCT should be performed if there is suspicion of multiple myeloma. If no focal lesions are found WBMRI or at least MRI of the spine and pelvis should be additionally performed if available. If WBMRI has been initially performed and focal lesions are present, an additional WBCT may be performed to assess the extent of bone destruction and fracture risk. In cases of monoclonal gammopathy of undetermined significance (MGUS), solitary and smoldering myeloma, a WBMRI, if available, should be performed in addition to WBCT.

Monolithic focused reference beam X-ray holography

Fourier transform holography is a highly efficient and robust imaging method, suitable for single-shot imaging at coherent X-ray sources. In its common implementation, the image contrast is limited by the reference signal generated by a small pinhole aperture. Increased pinhole diameters improve the signal, whereas the resolution is diminished. Here we report a new concept to decouple the spatial resolution from the image contrast by employing a Fresnel zone plate to provide the reference beam. Superimposed on-axis images of distinct foci are separated with a novel algorithm. Our method is insensitive to mechanical drift or vibrations and allows for long integration times common at low-flux facilities like high harmonic generation sources. The application of monolithic focused reference beams improves the efficiency of high-resolution X-ray Fourier transform holography beyond all present approaches and paves the path towards sub-10 nm single-shot X-ray imaging.

Analyzing mitochondrial dynamics in mouse organotypic slice cultures.

Mitochondria are mobile organelles that dynamically remodel their membranes and actively migrate along cytoskeletal tracks. There is overwhelming evidence that regulators of mitochondrial dynamics are critical for the survival and function of neural tissues. In multiple animal models, ablation of genes regulating mitochondrial shape result in stunted neural development and neurodegeneration. Organotypic cultures serve as ideal in vitro tissue models to further dissect the mechanisms of mitochondrial function in neuronal survival. Slice cultures preserve the three-dimensional cytoarchitecture of neural networks and can survive for prolonged periods in culture. In addition, these cultures allow long-term assessment of genetic or pharmacologic perturbations on neuronal function. Organotypic preparations from murine and rat models have been developed for many regions of the brain. In this chapter, we describe our methods for preparing basal ganglia and cerebellar slice cultures suitable for studying mitochondrial function in Parkinson's disease and cerebellar ataxia, respectively. With such slices, we describe a robust method for live imaging of mitochondrial dynamics. To quantitatively analyze mitochondrial motility, we show how to generate kymographs using the open source image analysis program ImageJ. These techniques provide a powerful platform for assessing mitochondrial activity in neural networks.

A double-threshold technique for fast time-correspondence imaging

We present a robust imaging method based on time-correspondence imaging and normalized ghost imaging (GI) that sets two thresholds to select the reference frame exposures for image reconstruction. This double-threshold time-correspondence imaging protocol always gives better quality and signal-to-noise ratio than previous GI schemes, and is insensitive to surrounding noise. Moreover, only simple add and minus operations are required while less data storage space and computing time are consumed; thus, faster imaging speeds are attainable. The protocol offers a general approach applicable to all GI techniques and marks a further step forward towards real-time practical applications of correlation imaging.

Hybrid-SPRITE MRI

In a FID based frequency encoding MRI experiment the central part of k-space is not generally accessible due to the probe dead time. This portion of k-space is however crucial for image reconstruction. SPRITE (Single Point Ramped Imaging with T1 Enhancement), SPI with a linearly ramped phase encode gradient, has been employed to image short relaxation time systems for many years with great success. It is a robust imaging method in significant measure because it provides acquisition of high quality k-space origin data. We propose a new sampling scheme, termed hybrid-SPRITE, combining phase and frequency encoding to ensure high quality images with reduced acquisition times, reduced gradient duty cycle and increased sensitivity. In hybrid-SPRITE, numerous time domain points are collected to assist image reconstruction. An Inverse Non-uniform Discrete Fourier Transform (INDFT) is employed in 1D applications. A pseudo-polar grid is exploited in 2D hybrid-SPRITE for rapid and accurate image reconstruction.

Ist die Kontrastmittelsonographie im klinischen Alltag eine robuste Methode? Eine retrospektive Analyse über 6 Monate

CEUS is a relatively new imaging method with growing use and broadening applications. It shows excellent accuracy with high negative and positive predictive values under study conditions. It is not well known, whether the study results can be reproduced in daily clinical practice. Retrospective analysis of all consecutive CEUS-exams at our institution during a six month period. 68% of CEUS-exams were of the liver. 83% (197 exams) concerned the characterisation of focal lesions. 95% of focal lesions could be clarified via CEUS. In 44% of the exams, CEUS changed the diagnosis of B-mode-US, in 74% of exams, CEUS was the final imaging method. We found a 64% concordance to cross sectional imaging and a 77% concordance to histology, when available. CEUS performance in daily clinical practice is comparable to controlled study conditions. CEUS is therefore a robust imaging method.

MR imaging of ore for heap bioleaching studies using pure phase encode acquisition methods

Various MRI techniques were considered with respect to imaging of aqueous flow fields in low grade copper ore. Spin echo frequency encoded techniques were shown to produce unacceptable image distortions which led to pure phase encoded techniques being considered. Single point imaging multiple point acquisition (SPI–MPA) and spin echo single point imaging (SESPI) techniques were applied. By direct comparison with X-ray tomographic images, both techniques were found to be able to produce distortion-free images of the ore packings at 2T. The signal to noise ratios (SNRs) of the SESPI images were found to be superior to SPI–MPA for equal total acquisition times; this was explained based on NMR relaxation measurements. SESPI was also found to produce suitable images for a range of particles sizes, whereas SPI–MPA SNR deteriorated markedly as particles size was reduced. Comparisons on a 4.7T magnet showed significant signal loss from the SPI–MPA images, the effect of which was accentuated in the case of unsaturated flowing systems. Hence it was concluded that SESPI was the most robust imaging method for the study of copper ore heap leaching hydrology.

Robust Adaptive Beamforming Imaging Approach for Stepped-Frequency through-the-Wall Radar

A robust Capon adaptive beamforming imaging method was proposed for stepped-frequency through-the-wall radar. According to the ideal of robust Capon beamforming (RCB) under the steering vector uncertainty set, Capon optimal weight vector in frequcency domain is obtained by accurately estimating Compensation function vector. Then signal energy is estimated by freqency weighting, and coherence factor (CF) weighting is applied to suppress sidelobe level. Therefore, this method not only achieves higher resolution and much better interference suppression capabilities, but also improves imaging contrast.

Micro-CT imaging assessment of dobutamine-induced cardiac stress in rats

Introduction Dobutamine (DOB) stress in animal models of heart disease has been imaged so far using echocardiography and magnetic resonance imaging. The purpose of this study was to assess normal response to DOB stress in rats using anatomical and functional data using micro-computed tomography (CT). Methods Ten normal adult male rats were first injected with a liposomal-based blood pool contrast agent and next infused with DOB via a tail vein catheter. Using prospective gating, 5 pairs of systole/diastole micro-CT images were acquired (a) pre-infusion baseline; (b) at heart rate plateau during infusion of 10 μg/kg/min DOB; (c) at post-DOB infusion baseline; (d) at heart rate plateau during infusion of 30 μg/kg/min DOB; and (e) after post-infusion return to baseline. Heart rate, peripheral and breathing distensions were monitored by oximetry. Micro-CT images with 88-μm isotropic voxels were segmented to obtain cardiac function based on volumetric measurements of the left ventricle. Results DOB stress increased heart rate and cardiac output with both doses. Ejection fraction increased above baseline by an average of 35.9% with the first DOB dose and 18.4% with the second dose. No change was observed in the relative peripheral arterial pressures associated with the significant increases in cardiac output. Discussion Micro-CT proved to be a robust imaging method able to provide isotropic data on cardiac morphology and function. Micro-CT has the advantage of being faster and more cost-effective than MR and is able to provide higher accuracy than echocardiography. The impact of such an enabling technology can be enormous in evaluating cardiotoxic effects of various test drugs.

Online real‐time reconstruction of adaptive TSENSE with commodity CPU/GPU hardware

Adaptive temporal sensitivity encoding (TSENSE) has been suggested as a robust parallel imaging method suitable for MR guidance of interventional procedures. However, in practice, the reconstruction of adaptive TSENSE images obtained with large coil arrays leads to long reconstruction times and latencies and thus hampers its use for applications such as MR-guided thermotherapy or cardiovascular catheterization. Here, we demonstrate a real-time reconstruction pipeline for adaptive TSENSE with low image latencies and high frame rates on affordable commodity personal computer hardware. For typical image sizes used in interventional imaging (128 x 96, 16 channels, sensitivity encoding (SENSE) factor 2-4), the pipeline is able to reconstruct adaptive TSENSE images with image latencies below 90 ms at frame rates of up to 40 images/s, rendering the MR performance in practice limited by the constraints of the MR acquisition. Its performance is demonstrated by the online reconstruction of in vivo MR images for rapid temperature mapping of the kidney and for cardiac catheterization.

Contrast-enhanced Multislice Computed Tomography of the Heart

Since the introduction of multislice computed tomography (MSCT) in 1998, non-invasive cardiac imaging has developed rapidly to become a robust method for morphological and functional imaging of the heart. The high temporal resolution and sub-millimetre spatial resolution of modern scanners result in an excellent morphological depiction of coronary arteries and bypass grafts. Recent studies of CT coronary angiography describe a sensitivity of up to 98% and a specificity of up to 91% over all coronary segments. Due to a high negative predictive value of 98–100%, CT coronary angiography is particularly suitable for non-invasive exclusion of coronary heart disease (CHD). Contrastenhanced CT of the heart also allows the assessment of the myocardium, heart valves and pulmonary veins, which can be simultaneously reconstructed from a 3D data set. This article describes the potential of cardiac diagnostics using MSCT, taking into account aspects of dosing and valid guidelines.

Diffusion Tensor Imaging of Cortical Surface Development

Diffusion tensor imaging (DTI) is a robust magnetic resonance imaging (MRI) method that expands the capabilities of structural MRI beyond volumetric and morphometric investigations toward the characterization of tissue microstructure. The three-dimensional diffusion of water in brain tissue can be

A two-compartment gel phantom for optimization and quality assurance in clinical BOLD fMRI

Clinical applications of blood oxygen level-dependent (BOLD) functional magnetic resonance imaging (fMRI) depend heavily on robust paradigms, imaging methods and analysis procedures. In this work, as a means to optimize and perform quality assurance of the entire imaging and analysis chain, a phantom that provides a well known and reproducible signal change similar to a block type fMRI experiment is presented. It consists of two gel compartments with slightly different T2 that dynamically enter and leave the imaged volume. The homogeneous gel in combination with a cylindrical geometry results in a well-defined T*2 difference causing a signal difference between the two compartments in T*2-weighted MR images. From time series data obtained with the phantom, maps of percent signal change (PSC) and t-values are calculated. As an example of image parameter optimisation, the phantom is demonstrated to be useful for accurate determination of the influence of echo time (TE) on BOLD fMRI results, taking the t-value as a measure of sensitivity. In addition, the phantom is proposed as a tool for quality assurance (QA) since reproducible time series and t-maps are obtained in a series of independent repeat experiments. The phantom is relatively simple to build and can therefore be used by any clinical fMRI center.

A Robust and Fast Imaging Algorithm with an Envelope of Circles for UWB Pulse Radars

Target shape estimation with UWB pulse radars is a promising imaging technique for household robots. We have already proposed a fast imaging algorithm, SEABED, that is based on a reversible transform BST (Boundary Scattering Transform) between the received signals and the target shape. However, the target image obtained by SEABED deteriorates in a noisy environment because it utilizes a derivative of received data. In this paper, we propose a robust imaging method with an envelope of circles. We clarify by numerical simulation that the proposed method can realize a level of robust and fast imaging that cannot be achieved by the original SEABED.

Investigation of waste disposal areas using electrical methods: a case study from Chania, Crete, Greece

A geophysical investigation of a landfill area was conducted as inextricable phase of a preliminary geotechnical, geological and hydrogeological study of the area under investigation. Electrical resistivity tomography (ERT), one of the most promising prospecting techniques mainly concerning its effective contribution to resolve several environmental problems, was applied for the geophysical modeling. ERT is a robust imaging method the theory and implementation of which are well documented in geophysical research literature. The survey site is located in Akrotirion Peninsula, about 7 km east of Chania city in Crete I. The geological setting comprises Trypalion limestones, marly limestones and a clayed weathered layer. Cavities are also identified at various scales which are recent tectono-karstic voids. Due to the above-mentioned geological singularity and in the light of the requirement for an environmentally safe construction of the landfill, an ERT survey was carried out. Specifically, seven geoelectrical tomographies were conducted reaching the prospecting depth of 36 m. The resulted images conduced, to overcome geotechnical problems since the spatial distribution of karstic voids was determined, to plan the future sites for waste disposal as the geological conditions were studied in detail and to reliably estimate the thickness of the already deposited wastes. The resulted images were confirmed using available borehole logs and ambient noise measurements.

Interactive continuously moving table (iCMT) large field‐of‐view real‐time MRI

Continuously moving table (CMT) MRI is a new method that is capable of generating 3D, seamless, large field-of-view (FOV) images by acquiring readouts along the patient superior-inferior axis as the subject is translated through the scanner. For applications that require artifact-free images, such as arterial-phase contrast-enhanced (CE) angiography of the legs, a major challenge is to match the MR data acquisition and patient table motion with the dynamics of blood flow in the region of interest (ROI). Instead of restricting the CMT to predetermined constant table speeds, we adopted a more general approach in which the table motion is decoupled from the phase-encoding order. In our approach the table moves adaptively and in response to operator-provided feedback obtained from viewing real-time preview (or fluoroscopic) images. This interactivity is accomplished by integrating high temporal-spatial resolution encoding of the table position with real-time hybrid-space filling and image reconstruction. Experimental results obtained using our prototype interactive CMT (iCMT) system on a peripheral vascular phantom and five healthy volunteers demonstrate the feasibility of this robust and rapid imaging method for acquiring 3D large-FOV continuous images with patient-specific adaptive table motion profiles.

Controlled kinetics of non-enzymatic chemiluminescence reactions for simple imaging of DNA and protein.

A robust and sensitive non-enzymatic chemiluminescence (CL) imaging method is presented. In the method a fast-emitting CL reaction is tuned to furnish a slower-emitting reaction suitable for simple CL imaging. Typically, non-enzymatic CL reactions between luminol or fluorescein and oxygen species generated by KCN as catalyst, were rather fast and unsuitable for CL imaging; the speed of the reactions could, however, be reduced substantially by changing KCN for CH(3)CN or benzonitrile. Light emission from the tuned CL reaction was intense and long-lived, and even with a simple arrangement high sensitivity could be achieved. The maximum CL peak was reached after approximately 1.5 min in the presence of 25% acetonitrile, and as little as 16 fmol commercial isoluminol-labeled streptavidin was detected and visualized on either microplate or membrane. The approach was further illustrated by imaging of DNA on a membrane and of antibody on a microplate by use of biotin-streptavidin chemistry. Overall, this simple, economical, and sensitive CL imaging system is expected to be very useful in biochemical analysis, and greatly complements currently used enzyme-based CL imaging methods, especially in routine applications.