RGD Loop Research Articles

Temperature-responsive bioactive hydrogels based on a multifunctional recombinant elastin-like polymer

A bioactive and multifunctional elastin-like polymer (ELP) was produced by genetic engineering techniques to develop new artificial matrices with the ability to mimic the extracellular matrix (ECM). The basic composition of this ELP is a thermo- and pH-sensitive elastin pentapeptide which has been enriched with RGD-containing domains, the RGD loop of fibronectin, for recognition by integrin receptors on their sequence to promote efficient cell attachment. Hydrogels of this RGD-containing polymer were obtained by crosslinking with hexamethylene diisocyanate, a lysine-targeted crosslinker. These materials retain the nature and temperature-responsive character, and the desired mechanical behavior of the elastin-like polymer family. The influence of the degree of crosslinking on the morphology and properties of the matrices were tested by calorimetric techniques and scanning electron microscopy (SEM). Their mechanical behavior was studied by dynamical mechanical analysis (DMA). These results show the potential of these materials in biomedical applications, especially in the development of smart systems for tissue engineering.

A human adenovirus species B subtype 21a associated with severe pneumonia

Between 2005 and 2013 six severe pneumonia cases (all requiring mechanical ventilation, two fatal outcomes) caused by human adenovirus type 21 (HAdV-B21) were observed in Germany. So far, HAdV-B21 was mainly associated with non-severe upper and lower respiratory tract infections. However, a few highly virulent HAdV types, e.g. HAdV-B14p1, were previously associated with severe, fatal pneumonia. Complete genomic sequences of the German HAdV-B21 pneumonia isolates formed a single phylogenetic cluster with very high sequence identity (≥ 99.897%). Compared to the HAdV-B21 prototype (only 99.319% identity), all isolates had a unique 15 amino acid deletion and a 2 amino acid insertion in the RGD loop of the penton base which may affect binding to the secondary receptor on the host cells. Moreover, a recombinant E4 gene region derived of HAdV-B3 was identified by bootscan analysis. Thus, the highly virulent, pneumotropic HAdV-B21 was denominated as subtype 21a. Surprisingly, there was 99.963% identity with agent Y/SIBU97 (only 13.4 kb available in GenBank of the 35.4 kb genome) which was associated with 10 fatalities due to cardiopulmonary failure in Sarawak, Malaysia, in 1997. In conclusion, a HAdV-B21 subtype (21a) associated with severe pneumonia in Germany was phylogenetically linked to an adenovirus isolated in Malaysia.

492. Adenovirus Vectors With Large Substitutions in the Penton Base RGD Loop Retain Infectivity and Elicit a Diminished Innate Immune Response In Vivo

492. Adenovirus Vectors With Large Substitutions in the Penton Base RGD Loop Retain Infectivity and Elicit a Diminished Innate Immune Response In Vivo

Molecular Docking Characterization of a Four-Domain Segment of Human Fibronectin Encompassing the RGD Loop with Hydroxyapatite

Fibronectin adsorption on biomaterial surfaces plays a key role in the biocompatibility of biomedical implants. In the current study, the adsorption behavior of the 7–10th type III modules of fibronectin (FN-III7–10) in the presence of hydroxyapatite (HAP) was systematically investigated by using molecular docking approach. It was revealed that the FN-III10 is the most important module among FN-III7–10 in promoting fibronectin binding to HAP by optimizing the interaction energy; the arginine residues were observed to directly interact with the hydroxyl group of HAP through electrostatic forces and hydrogen bonding. Moreover, it was found that the HAP-binding sites on FN-III10 are mainly located at the RGD loop region, which does not affect the interaction between the fibronectin protein and its cognate receptors on the cell surface.

Deciphering structural and functional roles of disulfide bonds in decorsin

Decorsin, an antagonist of integrin glycoprotein IIb/IIIa, contains Arg-Gly-Asp (RGD) sequence and three disulfide bridges. The function of RGD sequence has already been well defined, but the roles of conserved disulfide bonds in antihemostatic proteins still remain unclear. Herein we use the fusion expression and characterization of mutant decorsin to study the functions of disulfide bonds in protein structure, stability and biological activity. The purified protein shows an apparent inhibition of activity to platelet aggregation induced by ADP with IC50 of 500 nM. The removal of cys7-cys15 (from cysteine to serine) at the N-terminal causes a thirty-fold decrease of the inhibition activity with IC50 of 15 μM, whereas the mutation of cys22-cys38 at the C-terminal completely impairs the biological activity of decorsin. The overall secondary and tertiary structures of decorsin are disrupted inevitably without disulfide bonds. Using a domain insertion mutation, the retaining of RGD loop and the adjacent disulfide bond produces a week antihemostatic activity of decorsin. This reveals that the overall structure of decorsin stabilized by the three conserved disulfide bridges is cooperative for antihemostatic function. Our study on the effect of disulfide bonds together with RGD-sequence on the protein function is helpful for structure-based drug design of antithrombotic research.

SLLISWD Sequence in the 10FNIII Domain Initiates Fibronectin Fibrillogenesis

Fibronectin (FN) assembly into extracellular matrix is tightly regulated and essential to embryogenesis and wound healing. FN fibrillogenesis is initiated by cytoskeleton-derived tensional forces transmitted across transmembrane integrins onto RGD binding sequences within the tenth FN type III (10FNIII) domains. These forces unfold 10FNIII to expose cryptic FN assembly sites; however, a specific sequence has not been identified in 10FNIII. Our past steered molecular dynamics simulations modeling 10FNIII unfolding by force at its RGD loop predicted a mechanical intermediate with a solvent-exposed N terminus spanning the A and B β-strands. Here, we experimentally confirm that the predicted 23-residue cryptic peptide 1 (CP1) initiates FN multimerization, which is mediated by interactions with 10FNIII that expose hydrophobic surfaces that support 8-anilino-1-napthalenesulfonic acid binding. Localization of multimerization activity to the C terminus led to the discovery of a minimal 7-amino acid "multimerization sequence" (SLLISWD), which induces polymerization of FN and the clotting protein fibrinogen in addition to enhancing FN fibrillogenesis in fibroblasts. A point mutation at Trp-6 that reduces exposure of hydrophobic sites for 8-anilino-1-napthalenesulfonic acid binding and β-structure formation inhibits FN multimerization and prevents physiological cell-based FN assembly in culture. We propose a model for cell-mediated fibrillogenesis whereby cell traction force initiates a cascade of intermolecular exchange starting with the unfolding of 10FNIII to expose the multimerization sequence, which interacts with strand B of another 10FNIII domain via a Trp-mediated β-strand exchange to stabilize a partially unfolded intermediate that propagates FN self-assembly.

Juvenile idiopathic arthritis, mitral valve prolapse and a familial variant involving the integrin‐binding fragment of FBN1

Mutations in Fibrillin 1 (FBN1) are associated with Marfan syndrome and in some instances with the MASS phenotype (myopia, mitral valve prolapse, borderline non-progressive aortic root dilatation, skeletal features, and striae). Potential confusion over diagnosis and management in patients with borderline features has been addressed through the revised Ghent nosology, which emphasizes the importance of aortic root dilatation and ectopia lentis as features of Marfan syndrome. The overlapping and more common mitral valve prolapse syndrome is precluded by ectopia lentis or aortic dilatation. Among these clinically related conditions, there is no compelling evidence that genotype predicts phenotype, with the exception of neonatal Marfan syndrome, mutations in which cluster within FBN1 exons 24-32. Recent reports also link two very different phenotypes to changes in FBN1. Heterozygous mutations in transforming growth factor β-binding protein-like domain 5 (TB5) can cause acromicric or geleophysic dysplasias-and mutations in the TB4 domain, which contains an integrin binding RGD loop, have been found in congenital scleroderma/stiff skin syndrome. We report on a variant in an evolutionarily conserved residue that stabilizes the integrin binding fragment of FBN1, associated with juvenile idiopathic arthritis, mitral valve prolapse or apparently normal phenotype in different family members.

Dynamics and functional differences between dendroaspin and rhodostomin: Insights into protein scaffolds in integrin recognition

Dendroaspin (Den) and rhodostomin (Rho) are snake venom proteins containing a PRGDMP motif. Although Den and Rho have different 3D structures, they are highly potent integrin inhibitors. To study their structure, function, and dynamics relationships, we expressed Den and Rho in Pichia pastoris. The recombinant Den and Rho inhibited platelet aggregation with the K(I) values of 149.8 and 83.2 nM. Cell adhesion analysis showed that Den was 3.7 times less active than Rho when inhibiting the integrin αIIbβ3 and 2.5 times less active when inhibiting the integrin αvβ3. In contrast, Den and Rho were similarly active when inhibiting the integrin α5β1 with the IC₅₀ values of 239.8 and 256.8 nM. NMR analysis showed that recombinant Den and Rho have different 3D conformations for their arginyl-glycyl-aspartic acid (RGD) motif. However, the comparison with Rho showed that the docking of Den into integrin αvβ3 resulted in a similar number of contacts. Analysis of the dynamic properties of the RGD loop in Den and Rho showed that they also had different dynamic properties. These results demonstrate that protein scaffolds affect the function, structure, and dynamics of their RGD motif.

Extra-domain B in Oncofetal Fibronectin Structurally Promotes Fibrillar Head-to-tail Dimerization of Extracellular Matrix Protein

The type III extra-domain B (ED-B) is specifically spliced into fibronectin (Fn) during embryogenesis and neoangiogenesis, including many cancers. The x-ray structure of the recombinant four-domain fragment Fn(III)7B89 reveals a tightly associated, extended head-to-tail dimer, which is stabilized via pair-wise shape and charge complementarity. A tendency toward ED-B-dependent dimer formation in solution was supported by size exclusion chromatography and analytical ultracentrifugation. When amending the model with the known three-dimensional structure of the Fn(III)10 domain, its RGD loop as well as the adhesion synergy region in Fn(III)9-10 become displayed on the same face of the dimer; this should allow simultaneous binding of at least two integrins and, thus, receptor clustering on the cell surface and intracellular signaling. Insertion of ED-B appears to stabilize overall head-to-tail dimerization of two separate Fn chains, which, together with alternating homodimer formation via disulfide bridges at the C-terminal Fn tail, should lead to the known macromolecular fibril formation.

Effect of P to A mutation of the N-terminal residue adjacent to the Rgd motif on rhodostomin: importance of dynamics in integrin recognition.

Rhodostomin (Rho) is an RGD protein that specifically inhibits integrins. We found that Rho mutants with the P48A mutation 4.4–11.5 times more actively inhibited integrin α5β1. Structural analysis showed that they have a similar 3D conformation for the RGD loop. Docking analysis also showed no difference between their interactions with integrin α5β1. However, the backbone dynamics of RGD residues were different. The values of the R2 relaxation parameter for Rho residues R49 and D51 were 39% and 54% higher than those of the P48A mutant, which caused differences in S2, Rex, and τe. The S2 values of the P48A mutant residues R49, G50, and D51 were 29%, 14%, and 28% lower than those of Rho. The Rex values of Rho residues R49 and D51 were 0.91 s−1 and 1.42 s−1; however, no Rex was found for those of the P48A mutant. The τe values of Rho residues R49 and D51 were 9.5 and 5.1 times lower than those of P48A mutant. Mutational study showed that integrin α5β1 prefers its ligands to contain (G/A)RGD but not PRGD sequences for binding. These results demonstrate that the N-terminal proline residue adjacent to the RGD motif affect its function and dynamics, which suggests that the dynamic properties of the RGD motif may be important in Rho's interaction with integrin α5β1.

A Molecular Epidemiologic Study of Human Adenovirus Type 8 Isolates Causing Epidemic Keratoconjunctivitis in Kawasaki City, Japan in 2011

A local outbreak of epidemic keratoconjunctivitis (EKC) caused by human adenovirus type 8 (HAdV-D8) occurred in Kawasaki city, Japan in July-August 2011. Since the cases were sporadic in nature, the source of the infection could not be identified. The results of PCR analysis and the appearance of cytopathic effects in the samples indicated that 22 patients were positive for HAdV. The mean age of the patients (10 men and 12 women) was 64.3 ± 17.3 years (median, 68 years; range, 11-86 years). The sequences of hexon, which included hypervariable loop 1; the penton, which included RGD loops; and the fiber, which included the knob-coding regions, were identical in all the HAdV-positive cases. Phylogenetic analysis of the major capsid protein-encoding regions of HAdV confirmed that the isolates were HAdV-D8. Although the incidence of HAdV-D8 outbreaks has decreased in Japan since 1997, the results of our study imply that HAdV-D8 is still a causative agent for EKC outbreaks in Japan.

The Adenovirus Type 3 Dodecahedron's RGD Loop Comprises an HSPG Binding Site That Influences Integrin Binding

Human type 3 adenovirus dodecahedron (a virus like particle made of twelve penton bases) features the ability to enter cells through Heparan Sulphate Proteoglycans (HSPGs) and integrins interaction and is used as a versatile vector to deliver DNA or proteins. Cryo-EM reconstruction of the pseudoviral particle with Heparan Sulphate (HS) oligosaccharide shows an extradensity on the RGD loop. A set of mutants was designed to study the respective roles of the RGD sequence (RGE mutant) and of a basic sequence located just downstream. Results showed that the RGE mutant binding to the HS deficient CHO-2241 cells was abolished and unexpectedly, mutation of the basic sequence (KQKR to AQAS) dramatically decreased integrin recognition by the viral pseudoparticle. This basic sequence is thus involved in integrin docking, showing a close interplay between HSPGs and integrin receptors.

Cryo-Electron Microscopy Structure of an Adenovirus-Integrin Complex Indicates Conformational Changes in both Penton Base and Integrin

A structure of adenovirus type 12 (HAdV12) complexed with a soluble form of integrin alphavbeta5 was determined by cryo-electron microscopy (cryoEM) image reconstruction. Subnanometer resolution (8 A) was achieved for the icosahedral capsid with moderate resolution (27 A) for integrin density above each penton base. Modeling with alphavbeta3 and alpha(IIb)beta3 crystal structures indicates that a maximum of four integrins fit over the pentameric penton base. The close spacing (approximately 60 A) of the RGD protrusions on penton base precludes integrin binding in the same orientation to neighboring RGD sites. Flexible penton-base RGD loops and incoherent averaging of bound integrin molecules explain the moderate resolution observed for the integrin density. A model with four integrins bound to a penton base suggests that integrin might extend one RGD-loop in the direction that could induce a conformational change in the penton base involving clockwise untwisting of the pentamer. A global conformational change in penton base could be one step on the way to the release of Ad vertex proteins during cell entry. Comparison of the cryoEM structure with bent and extended models for the integrin ectodomain reveals that integrin adopts an extended conformation when bound to the Ad penton base, a multivalent viral ligand. These findings shed further light on the structural basis of integrin binding to biologically relevant ligands, as well as on the molecular events leading to HAdV cell entry.

The parent anion of the RGD tripeptide: Photoelectron spectroscopy and quantum chemistry calculations

The gas-phase conformation of the intact (parent) unprotected RGD(-) peptide anion has been investigated using a combination of anion photoelectron spectroscopy and quantum chemistry calculations of its low-energy stable structures. The experimentally observed RGD(-) species correspond to a conformation in which the guanidinium group is protonated, the C-terminus is neutral, the aspartic acid carboxyl is deprotonated, and the anion's excess electron orbital is localized on the protonated guanidinium. This structure is reminiscent of the RGD loop, which is the peptide motif recognized by trans-membrane integrins. The parent RGD(-) radical anion was generated using a unique infrared desorption-photoemission-helium jet ion source, whose ability to produce radical anions of peptides may also have analytical mass spectrometric implications.

Structure‐Dynamics‐Function Relationships of Disintegrins in Integrin Recognition

Integrins are the major cell surface receptors for cells to interact with extracellular matrix proteins and play an important role in cytoskeleton reorganization and signal transduction. Disintegrins are potent integrin inhibitors found in snake venoms. Depending on the size and the number of cysteines, they can be classified into small, medium, long, and dimeric disintegrins. To study structure and functional relationships of short and medium disintegrins, we expressed rhodostomin (Rho), a 68‐residue disintegrin with six disulfide bonds, and echistatin (Ech), a 49‐residue disintegrin with four disulfide bonds, in Pichia pastoris as the model proteins. The analysis of cell adhesion assay showed that Rho mutant containing ARGDDM sequences in the RGD loop and NPHKGPAT sequence in the C‐terminus exhibited 14.4‐, 4.1‐, and 2.33‐folds decrease in inhibitory activity to integrins £\IIb£]3, £\v£]3 and £\5£]1, respectively. Backbone dynamics analysis showed that their similar dynamics properties on the RGD motif. In contrast, the C‐terminal region of Rho is more flexible of that of Ech. This suggests that the dynamics properties of the C‐terminus of disintegrins also play a crucial role in determining their affinity and selectivity to integrins.

Substitution of Hexon Hypervariable Region 5 of Adenovirus Serotype 5 Abrogates Blood Factor Binding and Limits Gene Transfer to Liver

Liver tropism potentially leading to massive hepatocyte transduction and hepatotoxicity still represents a major drawback to adenovirus (Ad)-based gene therapy. We previously demonstrated that substitution of the hexon hypervariable region 5 (HVR5), the most abundant capsid protein, constituted a valuable platform for efficient Ad retargeting. The use of different mouse strains revealed that HVR5 substitution also led to dramatically less adenovirus liver transduction and associated toxicity, whereas HVR5-modified Ad were still able to transduce different cell lines efficiently, including primary hepatocytes. We showed that HVR5 modification did not significantly change Ad blood clearance or liver uptake at early times. However, we were able to link the lower liver transduction to enhanced HVR5-modified Ad liver clearance and impaired use of blood factors. Most importantly, HVR5-modified vectors continued to transduce tumors in vivo as efficiently as their wild-type counterparts. Taken together, our data provide a rationale for future design of retargeted vectors with a safer profile.

Fibronectin Unfolding Revisited: Modeling Cell Traction-Mediated Unfolding of the Tenth Type-III Repeat

Fibronectin polymerization is essential for the development and repair of the extracellular matrix. Consequently, deciphering the mechanism of fibronectin fibril formation is of immense interest. Fibronectin fibrillogenesis is driven by cell-traction forces that mechanically unfold particular modules within fibronectin. Previously, mechanical unfolding of fibronectin has been modeled by applying tensile forces at the N- and C-termini of fibronectin domains; however, physiological loading is likely focused on the solvent-exposed RGD loop in the 10th type-III repeat of fibronectin (10FNIII), which mediates binding to cell-surface integrin receptors. In this work we used steered molecular dynamics to study the mechanical unfolding of 10FNIII under tensile force applied at this RGD site. We demonstrate that mechanically unfolding 10FNIII by pulling at the RGD site requires less work than unfolding by pulling at the N- and C- termini. Moreover, pulling at the N- and C-termini leads to 10FNIII unfolding along several pathways while pulling on the RGD site leads to a single exclusive unfolding pathway that includes a partially unfolded intermediate with exposed hydrophobic N-terminal β-strands – residues that may facilitate fibronectin self-association. Additional mechanical unfolding triggers an essential arginine residue, which is required for high affinity binding to integrins, to move to a position far from the integrin binding site. This cell traction-induced conformational change may promote cell detachment after important partially unfolded kinetic intermediates are formed. These data suggest a novel mechanism that explains how cell-mediated forces promote fibronectin fibrillogenesis and how cell surface integrins detach from newly forming fibrils. This process enables cells to bind and unfold additional fibronectin modules – a method that propagates matrix assembly.

Structure of acostatin, a dimeric disintegrin from Southern copperhead (Agkistrodon contortrix contortrix), at 1.7 A resolution.

Disintegrins are a family of small (4-14 kDa) proteins that bind to another class of proteins, integrins. Therefore, as integrin inhibitors, they can be exploited as anticancer and antiplatelet agents. Acostatin, an alphabeta heterodimeric disintegrin, has been isolated from the venom of Southern copperhead (Agkistrodon contortrix contortrix). The three-dimensional structure of acostatin has been determined by macromolecular crystallography using the molecular-replacement method. The asymmetric unit of the acostatin crystals consists of two heterodimers. The structure has been refined to an R(work) and R(free) of 18.6% and 21.5%, respectively, using all data in the 20-1.7 A resolution range. The structure of all subunits is similar and is well ordered into N-terminal and C-terminal clusters with four intramolecular disulfide bonds. The overall fold consists of short beta-sheets, each of which is formed by a pair of antiparallel beta-strands connected by beta-turns and flexible loops of different lengths. Conformational flexibility is found in the RGD loops and in the C-terminal segment. The interaction of two N-terminal clusters via two intermolecular disulfide bridges anchors the alphabeta chains of the acostatin dimers. The C-terminal clusters of the heterodimer project in opposite directions and form a larger angle between them in comparison with other dimeric disintegrins. Extensive interactions are observed between two heterodimers, revealing an alphabetabetaalpha acostatin tetramer. Further experiments are required to identify whether the alphabetabetaalpha acostatin complex plays a functional role in vivo.

Phylogenetic Analysis and Structural Predictions of Human Adenovirus Penton Proteins as a Basis for Tissue-Specific Adenovirus Vector Design

The penton base is a major capsid protein of human adenoviruses (HAdV) which forms the vertices of the capsid and interacts with hexon and fiber protein. Two hypervariable loops of the penton are exposed on the capsid surface. Sequences of these and 300 adjacent amino acid residues of all 51 HAdV and closely related simian adenoviruses were studied. Adjacent sequences and predicted overall secondary structure were conserved. Phylogenetic analysis revealed clustering corresponding to the HAdV species and recombination events in the origin of HAdV prototypes. All HAdV except serotypes 40 and 41 of species F exhibited an integrin binding RGD motif in the second loop. The lengths of the loops (HVR1 and RGD loops) varied significantly between HAdV species with the longest RGD loop observed in species C and the longest HVR1 in species B. Long loops may permit the insertion of motifs that modify tissue tropism. Genetic analysis of HAdV prime strain p17'H30, a neutralization variant of HAdV-D17, indicated the significance of nonhexon neutralization epitopes for HAdV immune escape. Fourteen highly conserved motifs of the penton base were analyzed by site-directed mutagenesis of HAdV-D8 and tested for sustained induction of early cytopathic effects. Thus, three new motifs essential for penton base function were identified additionally to the RGD site, which interacts with a secondary cellular receptor responsible for internalization. Therefore, our penton primary structure data and secondary structure modeling in combination with the recently published fiber knob sequences may permit the rational design of tissue-specific adenoviral vectors.

αVβ6 Is a Novel Receptor for Human Fibrillin-1: COMPARATIVE STUDIES OF MOLECULAR DETERMINANTS UNDERLYING INTEGRIN-RGD AFFINITY AND SPECIFICITY

Human fibrillin-1, the major structural protein of connective tissue 10-12 nm microfibrils, contains multiple calcium binding epidermal growth factor-like domains interspersed with transforming growth factor beta-binding protein-like (TB) domains. TB4 contains a flexible RGD loop that mediates cell adhesion via alphaVbeta3 and alpha5beta1 integrins. This study identifies integrin alphaVbeta6 as a novel cellular receptor for fibrillin-1 with a K(d) of approximately 0.45 mum. Analyses of this interaction by surface plasmon resonance and immunocytochemistry reveal different module requirements for alphaVbeta6 activation compared with those of alphaVbeta3, suggesting that a covalent linkage of an N-terminal calcium binding epidermal growth factor-like domain to TB4 can modulate alphaV integrin binding specificity. Furthermore, our data suggest alpha5beta1 is a low affinity fibrillin-1 receptor (K(d) > 1 mum), thus providing a molecular explanation for the different alpha5beta1 distribution patterns seen when human keratinocytes and fibroblasts are plated on recombinant fibrillin fragments versus those derived from the physiological ligand fibronectin. Non-focal contact distribution of alpha5beta1 suggests that its engagement by fibrillin-1 may elicit a lesser degree and/or different type of intracellular signaling compared with that seen with a high affinity ligand.