Reverse Transcriptase Loop-mediated Isothermal Amplification Research Articles

Compact highly sensitive photothermal RT-LAMP chip for simultaneous multidisease detection.

Developing instant detection systems with disease diagnostic capabilities holds immense importance for remote or resource-limited areas. However, the task of creating these systems-which are simultaneously easy to operate, rapid in detection, and cost-effective-remains a challenge. In this study, we present a compact highly sensitive photothermal reverse transcriptase-loop-mediated isothermal amplification (RT-LAMP) chip (SPRC) designed for the detection of multiple diseases. The nucleic acid (NA) amplification on the chip is achieved through LAMP driven by either LED illumination or simple sunlight focusing. SPRC performs sample addition and amplification within a limited volume and autonomous enrichment of NA during the sample addition process, achieving a limit of detection (LOD) as low as 0.2 copies per microliter. Through 120 clinical samples, we achieved an accuracy of 95%, with a specificity exceeding 97.5%. Overall, SPRC has achieved promising progress in the application of point-of-care testing (POCT) by using light energy to simultaneously detect multiple diseases.

Reverse transcriptase loop-mediated isothermal amplification assisted with localized surface plasmon resonance of gold nanorods for viability assessment of Lactobacillus acidophilus in yogurt

In light of the growing production and consumption of functional foods, it is crucial to develop new methods to assess the authenticity of these products and prevent fraud and mislabeling. In this research, by integrating reverse transcription loop-mediated isothermal amplification (RT-LAMP) and the localized surface plasmon resonance (LSPR) effect of gold nanorods (GNRs), the viability of the probiotic bacteria has been evaluated. The RT-LAMP-GNR method effectively amplifies and identifies bacterial 16S-rRNA within 60 min. The efficiency of the RT-LAMP method was assessed by its implementation using RNA isolated from Lactobacillus acidophilus strain (L. acidophilus) and commercial probiotic yogurts. The method's limit of detection (LoD) was 104 bacterial cells per ml, and its sensitivity was 10−5 ng/ml RNA.

Evaluation and comparison of one-step real-time PCR and one-step RT-LAMP methods for detection of SARS-CoV-2

BackgroundThere is an increasing disease trend for SARS-COV-2, so need a quick and affordable diagnostic method. It should be highly accurate and save costs compared to other methods. The purpose of this research is to achieve these goals.MethodsThis study analyzed 342 samples using TaqMan One-Step RT-qPCR and fast One-Step RT-LAMP (Reverse Transcriptase Loop-Mediated Isothermal Amplification). The One-Step LAMP assay was conducted to assess the sensitivity and specificity.ResultsThe research reported positive samples using two different methods. In the RT-LAMP method, saliva had 92 positive samples (26.9%) and 250 negative samples (73.09%) and nasopharynx had 94 positive samples (27.4%) and 248 negative samples (72.51%). In the RT-qPCR method, saliva had 86 positive samples (25.1%) and 256 negative samples (74.8%) and nasopharynx had 93 positive samples (27.1%) and 249 negative samples (72.8%). The agreement between the two tests in saliva and nasopharynx samples was 93% and 94% respectively, based on Cohen’s kappa coefficient (κ) (P < 0.001). The rate of sensitivity in this technique was reported at a dilution of 1 × 101 and 100% specificity.ConclusionsBased on the results of the study the One-Step LAMP assay has multiple advantages. These include simplicity, cost-effectiveness, high sensitivity, and specificity. The One-Step LAMP assay shows promise as a diagnostic tool. It can help manage disease outbreaks, ensure prompt treatment, and safeguard public health by providing rapid, easy-to-use testing.

Towards real-time airborne pathogen sensing: Electrostatic capture and on-chip LAMP based detection of airborne viral pathogens

Considerable loss of life, economic slowdown, and public health risk associated with the transmission of airborne respiratory pathogens was underscored by the recent COVID-19 pandemic. Airborne transmission of zoonotic diseases such as the highly pathogenic avian influenza (HPAI) and porcine reproductive and respiratory syndrome virus (PRRSV) has caused major disruptions to domestic and global food security. Current ambient air pathogen monitoring systems involves the collection of air samples from indoor settings suspected of viral contamination, followed by subsequent processing of capture samples to determine the presence and species of airborne viral matter. Nucleic acid amplification techniques are considered the gold standard for pathogen diagnostics. Currently, the necessary extraction and purification of viral RNA from air collector systems prior to sample analysis is both time consuming and performed manually. A monitoring system with separate air sampling and biochemical detection procedures is prone to delay the response to emergent viral threats. In this paper, we present a pathogen monitoring system that overcomes these limitations related to extraction and purification of viral samples and lays the groundwork for a real-time monitor for airborne viral pathogens. We demonstrate a high flow electrostatic precipitator system, that uses small collection wells as counter electrodes for pathogen collection. Integrated reverse-transcriptase loop-mediated isothermal amplification (RT-LAMP) is used for detection of captured viral matter within wells. On-chip heating of collection wells is enabled by integrated planar heaters and small volumes of reagent (30 μL) directly to the collection wells. We present the design of such a system and show experimental results that demonstrate the use of this device for detection of aerosolized SARS-CoV-2 virus like particles (VLPs), a model pathogen for SARV-CoV-2.

Low-Cost Arduino Reverse Transcriptase Loop-Mediated Isothermal Amplification (RT-LAMP) for Sensitive Nucleic Acid Detection.

This work presents a low-cost transcription loop-mediated isothermal amplification (RT-LAMP) instrument for nucleic acid detection, employing an Arduino Nano microcontroller. The cooling system includes customized printed circuit boards (PCBs) that serve as electrical resistors and incorporate fans. An aluminum block is designed to accommodate eight vials. The system also includes two PCB heaters-one for sample heating and the other for vial lid heating to prevent condensation. The color detection system comprises a TCS3200 color 8-sensor array coupled to one side of the aluminum heater body and a white 8-LED array coupled to the other side, controlled by two Multiplexer/Demultiplexer devices. LED light passes through the sample, reaching the color sensor and conveying color information crucial for detection. The top board is maintained at 110 ± 2 °C, while the bottom board is held at 65 ± 0.5 °C throughout the RT-LAMP assay. Validation tests successfully demonstrated the efficacy of the colorimetric RT-LAMP reactions using SARS-CoV-2 RNA amplification as a sample viability test, achieving 100% sensitivity and 97.3% specificity with 66 clinical samples. Our instrument offers a cost-effective (USD 100) solution with automated result interpretation and superior sensitivity compared to visual inspection. While the prototype was tested with SARS-CoV-2 RNA samples, its versatility extends to detecting other pathogens using alternative primers, showcasing its potential for broader applications in biosensing.

Pipette-free field-deployable molecular diagnostic kit for bimodal visual detection of infectious RNA viruses.

Here, we developed a field-deployable molecular diagnostic kit for the detection of RNA viruses that operates in a pipette-free manner. The kit is composed of acrylic sticks, PCR tubes, and palm-sized three-dimensional(3D)-printed heaters operated by batteries. The kit performs RNA extraction, reverse transcriptase loop-mediated isothermal amplification (RT-LAMP), and visual detection in one kit. An acrylic stick was engraved with one shallow and one deep cylindrical chamber at each end for the insertion of an FTA card and ethidium homodimer-1 (EthD-1), respectively, to perform RNA extraction/purification and bimodal visual detection of the target amplicons. First, an intercalation of EthD-1 into the target DNA initially produces fluorescence upon UV illumination. Next, the addition of a strong oxidant, in this case sodium (meta) periodate (NaIO4 ), produces intense aggregates in the presence of EthD-1-intercalated DNA, realized by electrostatic interaction. In the absence of the target amplicon, no fluorescence or aggregates are observed. Using this kit, two major infectious viruses-severe fever with thrombocytopenia syndrome virus (SFTSV) and severe acute respiratory syndrome coronavirus (SARS-CoV-2)-were successfully detected in 1h, and the limits of detection (LOD) were approximately 1 virus μL-1 for SFTSV and 103 copies μL-1 for SARS-CoV-2 RNA. The introduced kit is portable, end-user-friendly, and can be operated in a pipette-free manner, paving the way for simple and convenient virus detection in resource-limited settings.

Versatility of reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) from diagnosis of early pathological infection to mutation detection in organisms.

Loop-mediated isothermal amplification (LAMP) is a rapid, state-of-the-art DNA amplification technology, used primarily for the quick diagnosis and early identification of microbial infection, caused by pathogens such as virus, bacteria and malaria. A target DNA can be amplified within 30min using the LAMP reaction, taking place at a steady temperature. The LAMP method uses four or six primers to bind eight regions of a target DNA and has a very high specificity. The devices used for conducting LAMP are usually simple since the LAMP method is an isothermal process. When LAMP is coupled with Reverse Transcription (RT), it allows direct detection of RNA in a sample. This greatly enhances the efficiency of diagnosis of RNA viruses in a sample. Recently, the rampant spread of COVID-19 demanded such a rapid, simple, and cost-effective Point of Care Test (PoCT) for the accurate diagnosis of this pandemic. Loop-mediated isothermal amplification(LAMP) assays are not only used for the detection of microbial pathogens, but there are various other applications such as detection of genetic mutations in food and various organisms. In this review, various implementations of RT-LAMP techniques would be discussed.

Diagnostic Performance of Saliva Samples in Asymtomatic COVID-19 Infected Patients in Kakamega Kenya

The pandemic coronavirus SARS‐CoV‐2 in the world has caused a large infected population suffering from COVID‐19. To curb the spreading of the virus, WHO urgently demanded an extension of screening and testing; thus, a rapid and simple diagnostic method is needed which is non-invasive. Use of self-collected saliva can minimize healthcare worker exposure and expand testing capabilities for symptomatic and asymptomatic patients. The main aim of this study was to document the ability of patients to self-collect sufficient saliva specimens for SARS-CoV-2 in the quantitative detection by Reverse Transcriptase Polymerase Chain Reaction (RT-PCR) in asymptomatic patients by themselves under observation by a healthcare provider. The researcher recorded whether the patients were confident and the suitability of the specimen for laboratory testing that would inform clinical decision making. Seventy-one patients aged from 13 years and above were included between December 2020 and July, 2021. Saliva samples and Nasopharyngeal samples were taken from each patient. Quantitative PCR was performed to detect SARS-CoV-2 viral load in the nasopharyngeal samples and qualitative Reverse Transcriptase Loop-mediated isothermal amplification (RT-LAMP) was used to detect the presence of the virus in saliva samples. Results of saliva vs. nasopharyngeal samples testing using the two different methods were compared. Statistical analyses were performed. Out of the 350 samples tested, 314 samples were found to be Covid 19 positive. Result of the test was validated by the RT-PCR test. This showed that only 314 samples were tested both by saliva rapid test and PCR test while the rest 36 samples were not tested using RT-PCR method but were tested using saliva test. Thus, the salivary test based on pure oral saliva samples easily obtained by noninvasive techniques using RT-LAMP has the same agreement with the nasopharyngeal technique using RT-PCR one in asymptomatic COVID-19 patients.

Rapid Laboratory Diagnosis of Epizootic Hemorrhagic Disease Virus Using a Loop-Mediated Isothermal Amplification Assay.

Reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) is a molecular diagnostic assay that is particularly useful for the detection of viral diseases of livestock. A major advantage of RT-LAMP is that it can be used either as a rapid field test or as a high-throughput screening tool in veterinary laboratories, with sensitivity comparable to the real-time RT-PCR assay. Unlike conventional or qPCR, RT-LAMP uses a strand displacement polymerase and a set of four to six primers that bind to several regions of the target nucleic acid. Amplification occurs without thermal cycling, and coupled with the numerous primers, RT-LAMP offers a rapid and highly specific molecular assay. In this chapter, we describe the RT-LAMP protocol for the detection of epizootic hemorrhagic disease virus (EHDV) as a low-cost, specific, and sensitive screening tool in veterinary diagnostic laboratories. We also provide guidance on how to adapt the RT-LAMP assay for rapid field testing.

Development of an integrated sample amplification control for salivary point-of-care pathogen testing

BackgroundThe COVID-19 pandemic has led to a rise in point-of-care (POC) and home-based tests, but concerns over usability, accuracy, and effectiveness have arisen. The incorporation of internal amplification controls (IACs), essential control for translational POC diagnostics, could mitigate false-negative and false-positive results due to sample matrix interference or inhibition. Although emerging POC nucleic acid amplification tests (NAATs) for detecting SARS-CoV-2 show impressive analytical sensitivity in the lab, the assessment of clinical accuracy with IACs is often overlooked. In some cases, the IACs were run spatially, complicating assay workflow. Therefore, the multiplex assay for pathogen and IAC is needed. ResultsWe developed a one-pot duplex reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) assay for saliva samples, a non-invasive and simple collected specimen for POC NAATs. The ORF1ab gene of SARS-CoV-2 was used as a target and a human 18S ribosomal RNA in human saliva was employed as an IAC to ensure clinical reliability of the RT-LAMP assay. The optimized assay could detect SARS-CoV-2 viral particles down to 100 copies/μL of saliva within 30 min without RNA extraction. The duplex RT-LAMP for SARS-CoV-2 and IAC is successfully amplified in the same reaction without cross-reactivity. The valid results were easily visualized in triple-line lateral flow immunoassay, in which two lines (flow control and IAC lines) represent valid negative results and three lines (flow control, IAC, and test line) represent valid positive results. This duplex assay demonstrated a clinical sensitivity of 95%, specificity of 100%, and accuracy of 96% in 30 clinical saliva samples. SignificanceIACs play a crucial role in ensuring user confidence with respect to the accuracy and reliability of at-home and POC molecular diagnostics. We demonstrated the multiplex capability of SARS-COV-2 and human18S ribosomal RNA RT-LAMP without complicating assay design. This generic platform can be extended in a similar manner to include human18S ribosomal RNA IACs into different clinical sample matrices.

Portable, single nucleotide polymorphism-specific duplex assay for virus surveillance in wastewater

The Argonaute protein from the archaeon Pyrococcus furiosus (PfAgo) is a DNA-guided nuclease that targets DNA with any sequence. We designed a virus detection assay in which the PfAgo enzyme cleaves the reporter probe, thus generating fluorescent signals when amplicons from a reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) assay contain target sequences. We confirmed that the RT-LAMP-PfAgo assay for the SARS-CoV-2 Delta variant produced significantly higher fluorescent signals (p < 0.001) when a single nucleotide polymorphism (SNP), exclusive to the Delta variant, was present, compared to the samples without the SNP. Additionally, the duplex assay for Pepper mild mottle virus (PMMOV) and SARS-CoV-2 detection produced specific fluorescent signals (FAM or ROX) only when the corresponding sequences were present. Furthermore, the RT-LAMP-PfAgo assay does not require dilution to reduce the impact of environmental inhibitors. The limit of detection of the PMMOV assay, determined with 30 wastewater samples, was 28 gc/μL, with a 95 % confidence interval of [11,103]. Finally, using a point-of-use device, the RT-LAMP-PfAgo assay successfully detected PMMOV in wastewater samples. Based on our findings, we conclude that the RT-LAMP-PfAgo assay can be used as a portable, SNP-specific duplex assay, which will significantly improve virus surveillance in wastewater.

Evaluation of a smartphone-operated point-of-care device using loop-mediated isothermal amplification technology for rapid and remote detection of SARS-CoV-2.

During the SARS-CoV-2 pandemic, rapid and sensitive detection of SARS-CoV-2 has been of high importance for outbreak control. Reverse transcriptase polymerase chain reaction (RT-PCR) is the current gold standard, however, the procedures require an equipped laboratory setting and personnel, which have been regularly overburdened during the pandemic. This often resulted in long waiting times for patients. In contrast, reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) is a simple, cost-efficient, and fast procedure, allowing for rapid and remote detection of SARS-CoV-2. In the current study, we performed a clinical evaluation of a new point-of-care test system based on LAMP-technology for SARS-CoV-2 detection, providing a result within 25 min (1copy™ COVID-19 MDx Kit Professional system). We tested 112 paired nasopharyngeal swabs, collected in the COVID-19 Ghent University Hospital test center, using the 1copy™ COVID-19 MDx Kit Professional system, and RT-PCR as the reference method. The test system was found to have a clinical sensitivity of 93.24% (69/74) (95% confidence interval [CI]: 84.93%-97.77%) and specificity of 97.37% (37/38) (95% CI: 86.19%-99.93%). Due to its easy smartphone operation and ready-to-use reagents, it ought to be easily applied in for instance general practices, pharmacies, nursing homes, schools, and companies. This would facilitate an efficient SARS-CoV-2 outbreak control and quarantine policy, as diagnosis can occur sooner in a near-patient setting.

Designing one-step reverse transcriptase loop-mediated isothermal amplification for serotype O foot-and-mouth disease virus detection during the 2022 outbreak in East Java, Indonesia.

Various methods can detect foot-and-mouth disease (FMD) in cows, but they necessitate resources, time, costs, laboratory facilities, and specific clinical specimen submission, often leading to FMD virus (FMDV) diagnosis delays. The 2022 FMD outbreak in East Java, Indonesia, highlighted the need for an easy, inexpensive, rapid, and accurate detection approach. This study aims to devise a one-step reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) technique and phylogenetic analysis to detect the serotype O FMDV outbreak in East Java. Swab samples were collected from the foot vesicles, nasal secretions, and saliva of five suspected FMDV-infected cows in East Java between June and July 2022. The RT-LAMP design used hydroxy naphthol blue dye or SYBR Green I dye, with confirmatory analysis through reverse transcriptase polymerase chain reaction (RT-PCR) targeting 249 base pairs. PCR products underwent purification, sequencing, and nucleotide alignment, followed by phylogenetic analysis. The RT-LAMP method using hydroxy naphthol blue dye displayed a positive reaction through a color shift from purple to blue in the tube. Naked-eye observation in standard light or ultraviolet (UV) light at 365 nm, with SYBR Green I stain, also revealed color change. Specifically, using SYBR Green I dye, UV light at 365 nm revealed a color shift from yellow to green, signifying a positive reaction. Nucleotide alignment revealed mutations and deletion at the 15th sequence in the JT-INDO-K3 isolate from the East Java FMDV outbreak. Despite differing branches, the phylogenetic tree placed it in the same cluster as serotype O FMDV from Malaysia and Mongolia. JT-INDO-K3 exhibited distinctions from Indonesian serotype O FMDV isolates and those documented in GenBank. Then, the RT-LAMP method used in this study has a detection limit 10 times higher latter than the conventional RT-PCR limit, without any cross-reactivity among strains.

Analytical and diagnostic performance characteristics of reverse-transcriptase loop-mediated isothermal amplification assays for dengue virus serotypes 1-4: A scoping review to inform potential use in portable molecular diagnostic devices.

Dengue is a mosquito-borne disease caused by dengue virus (DENV) serotypes 1-4 which affects 100-400 million adults and children each year. Reverse-transcriptase (RT) quantitative polymerase chain reaction (qPCR) assays are the current gold-standard in diagnosis and serotyping of infections, but their use in low-middle income countries (LMICs) has been limited by laboratory infrastructure requirements. Loop-mediated isothermal amplification (LAMP) assays do not require thermocycling equipment and therefore could potentially be deployed outside laboratories and/or miniaturised. This scoping literature review aimed to describe the analytical and diagnostic performance characteristics of previously developed serotype-specific dengue RT-LAMP assays and evaluate potential for use in portable molecular diagnostic devices. A literature search in Medline was conducted. Studies were included if they were listed before 4th May 2022 (no prior time limit set) and described the development of any serotype-specific DENV RT-LAMP assay ('original assays') or described the further evaluation, adaption or implementation of these assays. Technical features, analytical and diagnostic performance characteristics were collected for each assay. Eight original assays were identified. These were heterogenous in design and reporting. Assays' lower limit of detection (LLOD) and linear range of quantification were comparable to RT-qPCR (with lowest reported values 2.2x101 and 1.98x102 copies/ml, respectively, for studies which quantified target RNA copies) and analytical specificity was high. When evaluated, diagnostic performance was also high, though reference diagnostic criteria varied widely, prohibiting comparison between assays. Fourteen studies using previously described assays were identified, including those where reagents were lyophilised or 'printed' into microfluidic channels and where several novel detection methods were used. Serotype-specific DENV RT-LAMP assays are high-performing and have potential to be used in portable molecular diagnostic devices if they can be integrated with sample extraction and detection methods. Standardised reporting of assay validation and diagnostic accuracy studies would be beneficial.

Clinical Validation and Evaluation of a Colorimetric SARS-CoV-2 RT-LAMP Assay Against RT-PCR.

Reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) is one of the time-saving, accurate, and cost-effective alternative methods to real-time polymerase chain reaction (RT-PCR). This study aimed to identify the robustness of a colorimetric RT-LAMP assay kit that we developed, detecting SARS-COV-2 viral RNA within 30 minutes using a primer set special to the N gene against RT-PCR, the gold standard. Both symptomatic and asymptomatic subjects were included from a single university hospital and the status of both RT-PCR and RT-LAMP assay results were compared, and the consistency of these two assays was analyzed. We showed that the RT-LAMP and RT-PCR assay results confirmed 90% consistency. When we consider the epidemiologic, clinical, and radiologic evaluation, the consistency reached 97%. The results revealed that the colorimetric RT-LAMP assay was efficient, robust, and rapid to be used as in vitro diagnostic tool to display competitiveness compared with RT-PCR.

Development of one step colorimetric RT-LAMP assays for rapid detection of Apple mosaic virus and Prunus necrotic ringspot virus

Apple mosaic virus (ApMV) and Prunus necrotic ringspot virus (PNRSV), belonging to genus Ilarvirus, cause significant losses to rose and other plants of the family Rosaceae. They are easily transmitted through mechanical or vegetative means. In our previous study, the occurrence of ApMV and PNRSV in rose plants was reported. In this study, as a first step towards the development of a colorimetric Reverse Transcriptase – Loop Mediated Isothermal Amplification (RT-LAMP) assay, two primer sets were designed, each containing six primers (F3, B3, FIP, BIP, LF and LB) targeting the coat protein genes of ApMV and PNRSV. After incubation of RT-LAMP reaction mix at an isothermal temperature (65 °C/30 min), the amplified products were visually confirmed with the nucleic acid intercalation dye SYBR Green I and the indicator dye Hydroxy-Naphthol Blue. The developed assays were virus specific and showed no cross amplification. Their sensitivity was 103 times higher than that of the corresponding RT-PCRs. The LAMP assays developed in this study are inexpensive, rapid and reliable for the early detection of ApMV and PNRSV, and could therefore be used in plant quarantine to control the risk of their spread.

Development of an optimized colorimetric RT-LAMP for SARS-CoV-2 assay with enhanced procedure controls for remote diagnostics

The coronavirus pandemic accentuated the need for molecular diagnostic tests. A technique highly used to this end is the Polymerase Chain Reaction (PCR)—a sensitive and specific technique commonly used as the gold standard for molecular diagnostics. However, it demands highly trained personnel and high-maintenance equipment and is relatively time-consuming. An alternative is the Loop-Mediated Isothermal Amplification (LAMP) technique, which doesn’t need sample purification or expensive equipment, and is similar to PCR when compared in sensitivity and specificity. In this paper, we developed an optimized colorimetric Reverse Transcriptase Loop-Mediated Isothermal Amplification (RT-LAMP) Point-of-Care test using a portable device to diagnose COVID-19. Variables such as concentration of primers, magnesium sulfate, betaine, hydrochloride guanidine, Bst, and temperature of the reactions were tested. We also created a pipetting quality control system—using a combination of dyes—to avoid false negatives due to a lack of samples added to the reaction test tube. Mineral oil was incorporated in the composition of the RT-LAMP reactions to avoid evaporation when a heating lid isn't available. The final RT-LAMP test is tenfold more sensitive when compared to the WarmStart Colorimetric Master mix from New England Biolabs with a sensitivity of 5 copies per μL.

SARS-CoV-2 Mutations, Diagnosis and Their Concern

The first case is described in Wuhan city of China in December 2019 and the disease (COVID-19) continues to pose threat to global health all over the world affecting more than 40 million patients and 4 million deaths. Reliable and effective methods are taken a critical role such as real-time reverse transcriptase (RT)-PCR test as a gold stand method, serological tests, and reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) method is chosen firstly.

Development and Validation of Reverse Transcriptase Loop-Mediated Isothermal Amplification (RT-LAMP) as a Simple and Rapid Diagnostic Tool for SARS-CoV-2 Detection.

Since the COVID-19 pandemic outbreak in the world, many countries have searched for quick diagnostic tools to detect the virus. There are many ways to design diagnostic assays; however, each may have its limitations. A quick, sensitive, specific, and simple approach is essential for highly rapidly transmitted infections, such as SARS-CoV-2. This study aimed to develop a rapid and cost-effective diagnostic tool using a one-step Reverse Transcriptase Loop-Mediated Isothermal Amplification (RT-LAMP) approach. The results were observed using the naked eye within 30–60 min using turbidity or colorimetric analysis. The sensitivity, specificity, and lowest limit of detection (LoD) for SARS-CoV-2 RNA against the RT-LAMP assay were assessed. This assay was also verified and validated against commercial quantitative RT-PCR used by health authorities in Saudi Arabia. Furthermore, a quick and direct sampling from the saliva, or buccal cavity, was applied after simple modification, using proteinase K and heating at 98 °C for 5 min to avoid routine RNA extraction. This rapid single-tube diagnostic tool detected COVID-19 with an accuracy rate of 95% for both genes (ORF1a and N) and an LoD for the ORF1a and N genes as 39 and 25 copies/reaction, respectively. It can be potentially used as a high-throughput national screening for different respiratory-based infections within the Middle East region, such as the MERS virus or major zoonotic pathogens such as Mycobacterium paratuberculosis and Brucella spp., particularly in remote and rural areas where lab equipment is limited.

Quantitative detection of dengue serotypes using a smartphone-connected handheld lab-on-chip platform.

Dengue is one of the most prevalent infectious diseases in the world. Rapid, accurate and scalable diagnostics are key to patient management and epidemiological surveillance of the dengue virus (DENV), however current technologies do not match required clinical sensitivity and specificity or rely on large laboratory equipment. In this work, we report the translation of our smartphone-connected handheld Lab-on-Chip (LoC) platform for the quantitative detection of two dengue serotypes. At its core, the approach relies on the combination of Complementary Metal-Oxide-Semiconductor (CMOS) microchip technology to integrate an array of 78 × 56 potentiometric sensors, and a label-free reverse-transcriptase loop mediated isothermal amplification (RT-LAMP) assay. The platform communicates to a smartphone app which synchronises results in real time with a secure cloud server hosted by Amazon Web Services (AWS) for epidemiological surveillance. The assay on our LoC platform (RT-eLAMP) was shown to match performance on a gold-standard fluorescence-based real-time instrument (RT-qLAMP) with synthetic DENV-1 and DENV-2 RNA and extracted RNA from 9 DENV-2 clinical isolates, achieving quantitative detection in under 15 min. To validate the portability of the platform and the geo-tagging capabilities, we led our study in the laboratories at Imperial College London, UK, and Kaohsiung Medical Hospital, Taiwan. This approach carries high potential for application in low resource settings at the point of care (PoC).