Responsive Block Copolymer Micelles Research Articles

Intracellular K+-Responsive Block Copolymer Micelles for Targeted Drug Delivery of Curcumin.

Curcumin (CUR) is a natural bioactive compound that has attracted attention as a “golden molecule” due to its therapeutic properties against several types of tumors. Nonetheless, the antitumor application of CUR is hampered due to its extremely low aqueous solubility and chemical instability. Herein, a novel type of CUR-loaded polymeric micelles with intracellular K+-responsive controlled-release properties is designed and developed. The polymeric micelles are self-assembled by poly (N-isopropylacrylamide-co-acryloylamidobenzo-15-crown-5-co-N, N-dimethylacrylamide)-b-DSPE (PNDB-b-DSPE) block copolymers, and CUR. CUR is successfully loaded into the micelles with a CUR loading content of 6.26 wt%. The proposed CUR-PNDB-DSPE polymeric micelles exhibit a significant CUR release in simulated intracellular fluid due to the formation of 2 : 1 ‘‘sandwich’’ host–guest complexes of 15-crown-5 and K+, which lead to the hydrophilic outer shell of micelles to collapse and the drug to rapidly migrate out of the micelles. In vitro, the B16F10 cell experiment indicates that CUR-PNDB-DSPE micelles exhibit a high cellular uptake and excellent intracellular drug release in response to the intracellular K+ concentration. Moreover, CUR-PNDB-DSPE micelles show high cytotoxicity to B16F10 cells compared to free CUR and CUR-PEG-DSPE micelles. The polymeric micelles with intracellular K+-responsive controlled release properties proposed in this study provide a new strategy for designing novel targeted drug delivery systems for CUR delivery for cancer treatment.

Preparation of Layer‐by‐Layer Films with Remarkably Different pH‐Stability and Release Properties Using Dual Responsive Block Copolymer Micelles

AbstractLayer‐by‐layer (LbL) films of micelles of poly[2‐(dimethylamino)ethyl methacrylate]‐b‐poly[(2‐(diethylamino)ethyl methacrylate)] (PDMA‐b‐PDEA) and poly(sodium 4‐styrenesulfonate) (PSS) with remarkably different pH‐stability and release properties are obtained via tuning film deposition conditions in a narrow pH and temperature range. Multilayers constructed at pH 8.5/25 °C or pH 8/30 °C completely disintegrate at physiologically related conditions, whereas film deposition at pH 8/25 °C produces stable films under the same conditions. Importantly, despite their stability, pH 8/25 °C multilayers release a considerable amount of pyrene at moderately acidic pH due to disintegration of the micellar cores. The amount of pyrene increases significantly at body temperature due to lower critical solution temperature (LCST)‐type phase behavior of PDMA coronal chains. The difference in properties of multilayers is explained by the extent of association among the layers which can be tuned by film deposition conditions in a narrow pH and temperature range due to dual responsive, that is, pH and temperature behavior of PDMA‐b‐PDEA micelles.

K+ -Responsive Block Copolymer Micelles for Targeted Intracellular Drug Delivery.

In this work, a novel type of block copolymer micelles with K+ -responsive characteristics for targeted intracellular drug delivery is developed. The proposed smart micelles are prepared by self-assembly of poly(ethylene glycol)-b-poly(N-isopropylacry-lamide-co-benzo-18-crown-6-acrylamide) (PEG-b-P(NIPAM-co-B18C6Am)) block copolymers. Prednisolone acetate (PA) is successfully loaded into the micelles as the model drug, with loading content of 4.7 wt%. The PA-loaded micelles display a significantly boosted drug release in simulated intracellular fluid with a high K+ concentration of 150 × 10-3 m, as compared with that in simulated extracellular fluid. Moreover, the in vitro cell experiments indicate that the fluorescent molecules encapsulated in the micelles can be delivered and specifically released inside the HSC-T6 and HepG2 cells responding to the increase of K+ concentration in intracellular compartments, which confirms the successful endocytosis and efficient K+ -induced intracellular release. Such K+ -responsive block copolymer micelles are highly potential as new-generation of smart nanocarriers for targeted intracellular delivery of drugs.

Design and synthesis of redox and oxidative dual responsive block copolymer micelles for intracellular drug delivery

The need for smart materials in the area of biotechnology has accelerated the development of stimuli-responsive copolymer micelles. Here, we reported a novel dual-stimuli-responsive block copolymer PEG-DMTK-SS-PLA with both dimethyl thioketal (DMTK) and disulfide linkage incorporated into the backbone, capable of triggering fast drug release properties upon both oxidative (H2O2) and reductive (GSH) environment. The CMC values of these copolymer micelles ranging from 0.051 to 0.087mgmL−1, the average diameters are from 34nm to 55nm and 65nm to 198nm for blank and DOX-loaded micelles respectively. MTT assay conducted in NIH 3T3 cells showed the low cytotoxicity of these micelles even when the concentration reached up to 500μg/mL. Considering tumor microenvironment’s diverse in kinds of tumor cells, fluorescence microscopy, flow cytometry and MTT activity analysis were conducted in several cancer cells (e.g., cervix, lung, gastric, and colon cancer cells), and further confirmed that the dual responsive PEG-DMTK-SS-PLA micelles were degraded much faster than that of non-responsive PEG-PLA and single responsive PEG-SS-PLA and PEG-DMTK-PLA micelles. These results indicate that the dual-responsive micelles are promising for efficient anticancer drug delivery.

Transiently Responsive Block Copolymer Micelles Based on N-(2-Hydroxypropyl)methacrylamide Engineered with Hydrolyzable Ethylcarbonate Side Chains

The lack of selectivity and low solubility of many chemotherapeutics impels the development of different biocompatible nanosized drug carriers. Amphiphilic block copolymers, composed of a hydrophilic and hydrophobic domain, show great potential because of their small size, large solubilizing power and loading capacity. In this paper, we introduce a new class of degradable temperature-responsive block copolymers based on the modification of N-(2-hydroxypropyl)methacrylamide (HPMA) with an ethyl group via a hydrolytically sensitive carbonate ester, polymerized by radical polymerization using a PEG-based macroinitiatior. The micellization and temperature-responsive behavior of the PEG-poly(HPMA-EC) block copolymer were investigated by dynamic light scattering (DLS). We observed that the polymer exhibits lower critical solution temperature (LCST) behavior and that above the cloud point (cp) of 17 °C the block copolymer self-assembles in micelles with a diameter of 40 nm. Flow cytometry analysis and confocal microscopy show a dose-dependent cellular uptake of the micelles loaded with a hydrophobic dye. The block copolymer nanoparticles were capable of delivering the hydrophobic payload into cancer cells in both 2D and 3D in vitro cultures. The block copolymer has excellent cytocompatibility, whereas loading the particles with the hydrophobic anticancer drug paclitaxel results in a dose-dependent decrease in cell viability.

Self-assembly of BODIPY based pH-sensitive near-infrared polymeric micelles for drug controlled delivery and fluorescence imaging applications

Responsive block copolymer micelles emerging as promising imaging and drug delivery systems show high stability and on-demand drug release activities. Herein, we developed self-assembled pH-responsive NIR emission micelles entrapped with doxorubicin (DOX) within the cores by the electrostatic interactions for fluorescence imaging and chemotherapy applications. The block copolymer, poly(methacrylic acid)-block-poly[(poly(ethylene glycol) methyl ether methacrylate)-co-boron dipyrromethene derivatives] (PMAA-b-P(PEGMA-co-BODIPY), was synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization, and the molecular weight distribution of this copolymer was narrow (Mw/Mn = 1.31). The NIR fluorescence enhancement induced by the phenol/phenolate interconversion equilibrium works as a switch in response to the intracellular pH fluctuations. DOX-loaded PMAA-b-P(PEGMA-co-BODIPY) micelles can detect the physiological pH fluctuations with a pKa near physiological conditions (∼7.52), and showed pH-responsive collapse and an obvious acid promoted anticancer drug release behavior (over 58.8-62.8% in 10 h). Real-time imaging of intracellular pH variations was performed and a significant chemotherapy effect was demonstrated against HeLa cells.

Dual Responsive Block Copolymer Micelles Functionalized by NIPAM and Azobenzene

A novel amphiphilic diblock copolymer composed of a hydrophilic poly(ethylene oxide) block and a hydrophobic block copolymerized by azobenzene-containing methacrylate and N-isopropylacrylamide was synthesized using ATRP. The polymer micelles showed dual responsiveness to heat and light. The size of the micelles was dependent on temperature and the encapsulated substance in the hydrophobic cores was released during heating and cooling processes. The hydrophobicity of the micellar cores appeared as a reversible change in response to light with neither disruption of the micelles nor leakage of the encapsulated substance while H-aggregation of the azobenzene moieties was detected.

Polymeric Microcapsules Assembled from a Cationic/Zwitterionic Pair of Responsive Block Copolymer Micelles

Using a layer-by-layer (LbL) approach, this work presents the preparation of hollow microcapsules with a membrane constructed entirely from a cationic/zwitterionic pair of pH-responsive block copolymer micelles. Our previous work with such systems highlighted that, in order to retain the responsive nature of the individual micelles contained within the multilayer membranes, it is important to optimize the conditions required for the selective dissolution of the sacrificial particulate templates. Consequently, here, calcium carbonate particles have been employed as colloidal templates as they can be easily dissolved in aqueous environments with the addition of chelating agents such as ethylenediaminetetraacetic acid (EDTA). Furthermore, the dissolution can be carried out in solutions buffered to a desirable pH so not to adversely affect the pH sensitive micelles forming the capsule membranes. First, we have deposited alternating layers of anionic poly[2-(dimethylamino)ethyl methacrylate-block-poly(2-(diethylamino)ethyl methacrylate)] (PDMA-PDEA) and cationic poly(2-(diethylamino)ethyl)methacrylate-block-poly(methacrylic acid) (PDEA-PMAA) copolymer micelles onto calcium carbonate colloidal templates. After deposition of five micelle bilayers, addition of dilute EDTA solution resulted in dissolution of the calcium carbonate and formation of hollow polymer capsules. The capsules were imaged using atomic force microscopy (AFM) and scanning electron microscopy (SEM), which shows that the micelle/micelle membrane is sufficiently robust to withstand dissolution of the supporting template. Quartz crystal microbalance studies were conducted and provide good evidence that the micelle multilayer structure is retained after EDTA treatment. In addition, a hydrophobic dye was incorporated into the micelle cores prior to adsorption. After dissolution of the particle template, the resulting hollow capsules retained a high concentration of dye, suggesting that the core/shell structure of the micelles remains intact. Finally, thermogravimetric analysis (TGA) of dried capsules confirmed complete removal of the sacrificial inorganic template. As far as we are aware, this is the first demonstration of LbL assembled capsules composed entirely from responsive block copolymer micelles. The results presented here when combined with our previous findings demonstrate that such systems have potential application in the encapsulation and triggered release of actives.

Gold nanoring arrays from responsive block copolymer templates

We report a pH-mediated synthetic route for the production of ordered and size-tuneable arrays of gold nanorings using responsive block copolymer micelles as templates.

Incorporation of Block Copolymer Micelles into Multilayer Films for Use as Nanodelivery Systems

This work demonstrates the potential application of stimulus responsive block copolymer micelles as triggerable delivery systems for use within multilayer films. Cationic, pH-responsive micelles of poly[2-(dimethylamino)ethyl methacrylate-block-poly(2-(diethylamino)ethyl methacrylate)] (PDMA-PDEA) were deposited on anionic polystyrene latex particles. The charge reversal of the surface and the amount of adsorbed polymer were monitored by zeta potential measurements and colloidal titrations, respectively. Prior to adsorption, the PDMA-PDEA micelles were loaded with a hydrophobic dye, and UV-vis spectroscopy was used to determine the amount of dye encapsulated within a monolayer of micelles. It was found that subtle chemical modification of the PDMA-PDEA diblock copolymer via permanent quaternization of the PDEA block results in micelles with tunable loading capacities. Multilayers of cationic micelles of partially quaternized PDMA-PDEA and anionic polyelectrolyte (poly(sodium 4-styrene sulfonate)) were deposited on the surface of polystyrene latex particles by sequential adsorption. UV-vis analysis of the dye present within the multilayer after the addition of each layer demonstrates that the micelles are sufficiently robust to retain encapsulated dye after multiple adsorption/washing cycles and can thus create a film that can be increasingly loaded with dye as more micelle layers are adsorbed. Multiple washing cycles were performed on micellar monolayers of PDMA-PDEA to demonstrate how such systems can be used to bring about triggerable release of actives. When performing several consecutive washing steps at pH 9.3, the micelle structure of the PDMA-PDEA micelles in the monolayer is retained, resulting in only a small reduction in the amount of encapsulated dye. In contrast, washing at pH 4, the structure of the micelle layers is severely disrupted, resulting in a fast release of the encapsulated dye into the bulk. Finally, if a sufficient number of micelle/homopolyelectrolyte layers are adsorbed, it is possible to selectively dissolve the latex template, resulting in hollow capsules.

Preparation and characterization of thermally responsive block copolymer micelles comprising poly( N-isopropylacrylamide- b- dl-lactide)

The thermally sensitive block copolymer, poly( N-isopropylacrylamide- b- dl-lactide) (PIPAAm–PLA), was synthesized by ring-opening polymerization of dl-lactide initiated from hydroxy-terminated poly ( N-isopropylacrylamide) (PIPAAm). A PIPAAm bearing a single terminal hydroxyl group was prepared by telomerization using 2-hydroxyethanethiol as a chain-transfer agent. Successful preparation of PIPAAm and the PIPAAm–PLA block copolymer was verified by gel permeation chromatography (GPC) and 1H-NMR spectroscopy. Polymeric micelles were prepared from block copolymers using a dialysis method. Their solutions showed reversible changes in optical properties: transparent below a lower critical solution temperature (LCST) and opaque above the LCST. Dynamic light scattering measurements were used to observe the formation of micellar structures approximately 40 nm in diameter, which do not change between 20°C and 30°C. Above the LCST, polymer micelles aggregated, a phenomenon found to be reversible since the aggregates dissociated again by cooling below the LCST. Further observations using atomic force microscopy (AFM) confirmed this behaviour. The properties of this block copolymer system are interesting from both applied and fundamental perspectives, particularly for active targeting as drug carriers.