Anterior Cruciate Ligament In Response Research Articles

Novel quantification of the regional strain distribution in the anterior cruciate ligament in response to simulated loading using micro-CT imaging

PurposeA large percentage of anterior cruciate ligament (ACL) surgical reconstructions experience sub-optimal outcomes within 2 years. A potential factor contributing to poor outcomes is an incomplete understanding of micro-level, regional ACL biomechanics. This research aimed to demonstrate a minimally invasive method that uses micro-CT imaging to quantify regional ACL strains under clinically relevant joint loading.MethodsA pattern of 0.8 mm diameter zirconium dioxide beads were arthroscopically inserted into four regions of the ACL of four cadaveric knee specimens (mean [SD] age = 59 [9] years). A custom micro-CT compatible joint motion simulator then applied clinically relevant joint loading conditions, while an image was acquired at each condition. From the resulting images, strains within each region were calculated using the centroid coordinates of each tissue-embedded bead. Strain repeatability was assessed using the mean intra-specimen standard deviation across repeated load applications. A one-way repeated measures ANOVA (α = 0.05) was used to determine regional strain variations.ResultsThe mean intra-specimen standard deviation across repeated load application was ±0.003 strain for all specimens. No statistically significant differences were found between tissue regions, although medium and large effect sizes (0.095–0.450) suggest that these differences may be clinically relevant.ConclusionsThe method presented here demonstrates a minimally invasive measurement of regional ACL strain under clinically relevant joint loads using micro-CT imaging. The strain measurements demonstrated excellent reliability across the five repeated load applications and suggest a non-homogenous distribution of strain through the ACL.

Does Lateral Extra-articular Tenodesis of the Knee Affect Anterior Cruciate Ligament Graft In Situ Forces and Tibiofemoral Contact Pressures?

To quantify the effects of lateral extra-articular tenodesis (LET) on tibiofemoral compartment contact area and pressures, knee kinematics, and forces. Nine cadaveric knees were tested using a robotic testing system. Two loading conditions, (1) anterior tibial translational load coupled with axial compression and (2) internal tibial torque coupled with axial compression, were applied for each knee state at full extension and 30°, 60°, and 90° of knee flexion. Kinematic data was recorded for 3 knee states: anterolateral capsule (ALC) competent, ALC deficient, and post-LET using a 6-mm semitendinosus graft. In situ force in the anterior cruciate ligament (ACL) was quantified using the principle of superposition by comparing the change in force measured before and after the removal of the ALC. Contact area and pressures in each tibiofemoral compartment were measured by replaying kinematics after soft tissues were removed and pressure sensors were inserted. In response to an anterior tibial translational load, mean contact area in the medial compartment decreased by 33.1% from the ALC-competent to post-LET knee states at 90° of knee flexion (P=.042). No significant differences in lateral compartment contact pressure were found between knee states. In situ force in the ACL in response to an anterior tibial translational load decreased by 43.4% and 50% from the ALC-deficient to post-LET knee states at 60° (P= .02) and 90° (P= .006). No significant difference in kinematics was observed between the ALC-competent and post-LET knee states in each of the loading conditions at all knee flexion angles (P > .05). In this invitro model, LET with a semitendinosus graft did not significantly overconstrain the knee or increase pressure in the lateral compartment. Additionally, LET reduced the in situ force in the ACL in the setting of ALC injury. The lack of knee overconstraint without significant increases in lateral compartment pressures indicates that if an LET with semitendinosus graft is not overtensioned, accelerated degenerative changes in the lateral compartment may not be expected after this procedure.

Modelling the loading mechanics of anterior cruciate ligament

Background and ObjectivesThe anterior cruciate ligament (ACL) plays a crucial role in knee stability and is the most commonly injured knee ligament. Although ACL loading patterns have been investigated previously, the interactions between knee loadings transmitted to ACL remain elusive. Understanding the loading mechanism of ACL during dynamic tasks is essential to prevent ACL injuries. Therefore, we propose a computational model that predicts the force applied to ACL in response to knee loading in three planes of motion. MethodsFirst, a three-dimensional (3D) computational model was developed and validated using available cadaveric experimental data to predict ACL force. This 3D model was then combined with a neuromusculoskeletal model of lower limb and used to estimate in vivo ACL forces during a standardised drop-landing task. The neuromusculoskeletal model utilised movement data collected from female participants during a dynamic task and calculated lower limb joint kinematics and kinetics, as well as muscle forces. ResultsThe total ACL force predicted by the 3D computational ACL force model was in good agreement with cadaveric data, as strong correlation (r2 = 0.96 and P < 0.001), minimal bias, and narrow limits of agreement were observed. The combined model further illustrated that the ACL is primarily loaded through the sagittal plane, mainly due to muscle loading. ConclusionsThe proposed computational model is the first validated model that can provide an accessible tool to develop and test knee ACL injury prevention programs for people with normal ACL. This method can be extended to study the abnormal ACL upon the availability of relevant experimental data.

Inflammatory and degenerative phases resulting from anterior cruciate rupture in a non-invasive murine model of post-traumatic osteoarthritis.

ABSTRACTJoint injury is the predominant risk factor for post‐traumatic osteoarthritis development (PTOA). Several non‐invasive mouse models mimicking human PTOA investigate molecular mechanisms of disease development; none have characterized the inflammatory response to this acute traumatic injury. Our aim was to characterize the early inflammatory phase and later degenerative component in our in vivo non‐invasive murine model of PTOA induced by anterior cruciate ligament (ACL) rupture. Right knees of 12‐week‐old C57Bl6 mice were placed in flexion at a 30° offset position and subjected to a single compressive load (12N, 1.4 mm/s) to induce ACL rupture with no obvious damage to surrounding tissues. Tissue was harvested 4 h post‐injury and on days 3, 14, and 21; contralateral left knees served as controls. Histological, immunohistochemical, and gene analyzes were performed to evaluate inflammatory and degenerative changes. Immunohistochemistry revealed time‐dependent expression of mature (F4/80 positive) and inflammatory (CD11b positive) macrophage populations within the sub‐synovial infiltrate, developing osteophytes, and inflammation surrounding the ACL in response to injury. Up‐regulation of genes encoding acute pro‐inflammatory markers, inducible nitric oxide synthase, interleukin‐6 and interleukin‐17, and the matrix degrading enzymes, ADAMTS‐4 and MMP3 was detected in femoral cartilage, concomitant with extensive cartilage damage and bone remodelling over 21‐days post‐injury. Our non‐invasive model describes pathologically distinct phases of the disease, increasing our understanding of inflammatory episodes, the tissues/cells producing inflammatory mediators and the early molecular changes in the joint, thereby defining the early phenotype of PTOA. This knowledge will guide appropriate interventions to delay or arrest disease progression following joint injury. © 2018 The Authors. Journal of Orthopaedic Research® Published by Wiley Periodicals, Inc. on behalf of the Orthopaedic Research Society. J Orthop Res 36:2118–2127, 2018.

Strain distribution in the anterior cruciate ligament in response to anterior drawer force to the knee

Strain distribution in the anterior cruciate ligament in response to anterior drawer force to the knee

The Anterolateral Capsule of the Knee Behaves Like a Sheet of Fibrous Tissue

Background: The function of the anterolateral capsule of the knee has not been clearly defined. However, the contribution of this region of the capsule to knee stability in comparison with other anterolateral structures can be determined by the relative force that each structure carries during loading of the knee. Purpose/Hypothesis: The purpose of this study was to determine the forces in the anterolateral structures of the intact and anterior cruciate ligament (ACL)–deficient knee in response to an anterior tibial load and internal tibial torque. It was hypothesized that the anterolateral capsule would not function like a traditional ligament (ie, transmitting forces only along its longitudinal axis). Study Design: Controlled laboratory study. Methods: Loads (134-N anterior tibial load and 7-N·m internal tibial torque) were applied continuously during flexion to 7 fresh-frozen cadaveric knees in the intact and ACL-deficient state using a robotic testing system. The lateral collateral ligament (LCL) and the anterolateral capsule were separated from the surrounding tissue and from each other. This was done by performing 3 vertical incisions: lateral to the LCL, medial to the LCL, and lateral to the Gerdy tubercle. Attachments of the LCL and anterolateral capsule were detached from the underlying tissue (ie, meniscus), leaving the insertions and origins intact. The force distribution in the anterolateral capsule, ACL, and LCL was then determined at 30°, 60°, and 90° of knee flexion using the principle of superposition. Results: In the intact knee, the force in the ACL in response to an anterior tibial load was greater than that in the other structures (P < .001). However, in response to an internal tibial torque, no significant differences were found between the ACL, LCL, and forces transmitted between each region of the anterolateral capsule after capsule separation. The anterolateral capsule experienced smaller forces (~50% less) compared with the other structures (P = .048). For the ACL-deficient knee in response to an anterior tibial load, the force transmitted between each region of the anterolateral capsule was 434% greater than was the force in the anterolateral capsule (P < .001) and 54% greater than the force in the LCL (P = .036) at 30° of flexion. In response to an internal tibial torque at 30°, 60°, or 90° of knee flexion, no significant differences were found between the force transmitted between each region of the anterolateral capsule and the LCL. The force in the anterolateral capsule was significantly smaller than that in the other structures at all knee flexion angles for both loading conditions (P = .004 for anterior tibial load and P = .04 for internal tibial torque). Conclusion: The anterolateral capsule carries negligible forces in the longitudinal direction, and the forces transmitted between regions of the capsule were similar to the forces carried by the other structures at the knee, suggesting that it does not function as a traditional ligament. Thus, the anterolateral capsule should be considered a sheet of tissue. Clinical Relevance: Surgical repair techniques for the anterolateral capsule should restore the ability of the tissue to transmit forces between adjacent regions of the capsule rather than along its longitudinal axis.

Quantifying in vivo laxity in the anterior cruciate ligament and individual knee joint structures

A custom knee loading apparatus (KLA), when used in conjunction with magnetic resonance imaging, enables in vivo measurement of the gross anterior laxity of the knee joint. A numerical model was applied to the KLA to understand the contribution of the individual joint structures and to estimate the stiffness of the anterior-cruciate ligament (ACL). The model was evaluated with a cadaveric study using an in situ knee loading apparatus and an ElectroForce test system. A constrained optimization solution technique was able to predict the restraining forces within the soft-tissue structures and joint contact. The numerical model presented here allowed in vivo prediction of the material stiffness parameters of the ACL in response to applied anterior loading. Promising results were obtained for in vivo load sharing within the structures. The numerical model overestimated the ACL forces by 27.61–92.71%. This study presents a novel approach to estimate ligament stiffness and provides the basis to develop a robust and accurate measure of in vivo knee joint laxity.

Distribution of Force in the Medial Collateral Ligament Complex During Simulated Clinical Tests of Knee Stability

Background: Pivot-shift injury commonly results in combined anterior cruciate ligament (ACL)/medial collateral ligament (MCL) injury, yet the contribution of the components of the MCL complex to restraining multiplanar rotatory loads forming critical subcomponents of the pivot shift is not well understood. Purpose: To quantify the role of the MCL complex in restraining multiplanar rotatory loads. Study Design: Controlled laboratory study. Methods: A robotic manipulator was used to apply combined valgus and internal rotation torques in a simplified model of the pivot-shift examination in 12 cadaveric knees (49 ± 11 years). Tibiofemoral kinematics were recorded with the ACL intact. Loads borne by the superficial MCL (sMCL), posterior oblique ligament (POL), deep MCL (dMCL), and ACL were determined via the principle of superposition. Results: The POL bore about 50% of the load carried by the ACL in response to the combined torques at 5° and 15° of flexion. The POL bore load during the internal rotation component of the combined torques, while the sMCL carried load during the valgus and internal rotation phases of the simulated pivot. Load in the dMCL was always <10% of the ACL in response to combined valgus and internal rotation torques. Conclusion: The POL provides complementary load bearing to the ACL near extension in response to combined torques, which capture key components of the pivot-shift examination. The sMCL resists the valgus component of the maneuver alone, a loading pattern unique from those of the POL and ACL. The dMCL is not loaded during clinical tests of rotational knee stability in the ACL-competent knee. Clinical Relevance: Both the sMCL and POL work together with the ACL to resist combined moments, which form key components of the pivot-shift examination.

Mechanical functions of the three bundles consisting of the human anterior cruciate ligament

The reconstruction technique to individually reconstruct multi-bundles of the anterior cruciate ligament (ACL) has been improved in the last decade. For further improvement of the technique, the present study was conducted to determine the force sharing among the three bundles (the medial and lateral bundles (AMM and AML) of the anteromedial (AM) bundle and the posterlateral (PL) bundle) of the human ACL in response to hyperextension, passive flexion-extension and anterior force to the knee. Using a 6-DOF robotic system, the human cadaveric knee specimens were subjected to hyperextension, passive flexion-extension and anterior-posterior tests, while recording the 6-DOF motion and force/moment of the knees. The intact knee motions recorded during the tests were reproduced after sequential bundle transection to determine the bundle forces. The bundle forces were around 10 N at 5 N-m of hyperextension and remained less than 5 N during passive flexion-extension. In response to 100 N of anterior force, the AMM and PL bundle forces were slightly higher than the AML bundle force at full extension. The AMM bundle force remained at a high level up to 90° of flexion, with significant differences versus the AML bundle force at 15°, 30° and 60° of flexion and the PL bundle force at 90° of flexion. The AMM bundle is the primary stabilizer to tibial anterior drawer through wide range of motion, while the AML bundle is the secondary stabilizer in deep flexion angles. The PL bundle is the crucial stabilizer to hyperextension as well as tibial anterior drawer at full extension.

The Effect of the Shoe-Surface Interface in the Development of Anterior Cruciate Ligament Strain

The shoe-surface interface has been implicated as a possible risk factor for anterior cruciate ligament (ACL) injuries. The purpose of this study is to develop a biomechanical, cadaveric model to evaluate the effect of various shoe-surface interfaces on ACL strain. There will be a significant difference in ACL strain between different shoe-surface combinations when a standardized rotational moment (a simulated cutting movement) is applied to an axially loaded lower extremity. The study design was a controlled laboratory study. Eight fresh-frozen cadaveric lower extremities were thawed and the femurs were potted with the knee in 30 deg of flexion. Each specimen was placed in a custom-made testing apparatus, which allowed axial loading and tibial rotation but prevented femoral rotation. For each specimen, a 500 N axial load and a 1.5 Nm internal rotation moment were placed for four different shoe-surface combinations: group I (AstroTurf-turf shoes), group II (modern playing turf-turf shoes), group III (modern playing turf-cleats), and group IV (natural grass-cleats). Maximum strain, initial axial force and moment, and maximum axial force and moment were calculated by a strain gauge and a six component force plate. The preliminary trials confirmed a linear relationship between strain and both the moment and the axial force for our testing configuration. In the experimental trials, the average maximum strain was 3.90, 3.19, 3.14, and 2.16 for groups I-IV, respectively. Group IV had significantly less maximum strain (p<0.05) than each of the other groups. This model can reproducibly create a detectable strain in the anteromedial bundle of the ACL in response to a given axial load and internal rotation moment. Within the elastic range of the stress-strain curve, the natural grass and cleat combination produced less strain in the ACL than the other combinations. The favorable biomechanical properties of the cleat-grass interface may result in fewer noncontact ACL injuries.

A three-dimensional finite element model of the human anterior cruciate ligament: a computational analysis with experimental validation

In this study, the force and stress distribution within the anteromedial (AM) and posterolateral (PL) bundles of the anterior cruciate ligament (ACL) in response to an anterior tibial load with the knee at full extension was calculated using a validated three-dimensional finite element model (FEM) of a human ACL. The interaction between the AM and PL bundles, as well as the contact and friction caused by the ACL wrapping around the bone during knee motion, were included in the model. The AM and PL bundles of the ACL were simulated as incompressible homogeneous and isotropic hyperelastic materials. The multiple-degrees-of-freedom (DOF) knee kinematics of a cadaveric knee were first obtained using a robotic/universal force–moment sensor testing system. These data were used as the boundary conditions for the FEM of the ACL to calculate the forces in the ACL. The calculated forces were compared to the in situ force in the ACL, determined experimentally, to validate the model. The validated FEM was then used to calculate the force and stress distribution within the ACL under an anterior tibial load at full extension. The AM and PL bundles shared the force, and the stress distribution was non-uniform within both bundles with the highest stress localized near the femoral insertion site. The contact and friction caused by the ACL wrapping around the bone during knee motion played the role of transferring the force from the ACL to the bone, and had a direct effect on the force and stress distribution of the ACL. This validated model will enable the analysis of force and stress distribution in the ACL in response to more complex loading conditions and has the potential to help design improved surgical procedures following ACL injuries.

Distribution of in situ forces in the anterior cruciate ligament in response to rotatory loads

The anterior cruciate ligament (ACL) can be anatomically divided into anteromedial (AM) and posterolateral (PL) bundles. Current ACL reconstruction techniques focus primarily on reproducing the AM bundle, but are insufficient in response to rotatory loads. The objective of this study was to determine the distribution of in situ force between the two bundles when the knee is subjected to anterior tibial and rotatory loads. Ten cadaveric knees (50 ± 10 years) were tested using a robotic/universal force-moment sensor (UFS) testing system. Two external loading conditions were applied: a 134 N anterior tibial load at full knee extension and 15°, 30°, 60°, and 90° of flexion and a combined rotatory load of 10 N m valgus and 5 N m internal tibial torque at 15° and 30° of flexion. The resulting 6 degrees of freedom kinematics of the knee and the in situ forces in the ACL and its two bundles were determined. Under an anterior tibial load, the in situ force in the PL bundle was the highest at full extension (67 ± 30 N) and decreased with increasing flexion. The in situ force in the AM bundle was lower than in the PL bundle at full extension, but increased with increasing flexion, reaching a maximum (90 ± 17 N) at 60° of flexion and then decreasing at 90°. Under a combined rotatory load, the in situ force of the PL bundle was higher at 15° (21 ± 11 N) and lower at 30° of flexion (14 ± 6 N). The in situ force in the AM bundle was similar at 15° and 30° of knee flexion (30 ± 15 vs. 35 ± 16 N, respectively). Comparing these two external loading conditions demonstrated the importance of the PL bundle, especially when the knee is near full extension. These findings provide a better understanding of the function of the two bundles of the ACL and could serve as a basis for future considerations of surgical reconstruction in the replacement of the ACL.

A quantitative analysis of valgus torque on the ACL: a human cadaveric study

The loads needed to elicit a positive pivot shift test in a knee with an anterior cruciate ligament (ACL) rupture have not been quantified. The coupled anterior tibial translation (ATT), coupled internal tibial rotation (ITR), and the in situ force in the ACL in response to a valgus torque, an inherent component of the pivot shift test, were measured in 10 human cadaveric knee specimens. Using a robotic/universal force–moment sensor testing system, valgus torques ranging from 0.0 to 10.0 N m were applied in nine increments on the intact and ACL-deficient knee in flexion ranging from 0° to 90°. At 15° of knee flexion, the coupled ATT and ITR were significantly increased in the ACL-deficient knee when compared to the intact knee. Coupled ATT increased a maximum of 291% (6.7 mm, p<0.05), while coupled ITR increased a maximum of 85% (5.1°, p<0.05). At 30°, the increases in coupled ATT and ITR were significant at valgus loads of 3.3 N m and greater with a maximum increase in coupled ATT of 137% (6.3 mm, p<0.05) and a maximum increase in coupled ITR of 38% (3.6°, p<0.05). At 45°, coupled ATT increased significantly (maximum of 69%, 4.4 mm, p<0.05), but only at torques ⩾6.7 N m. The in situ force in the ACL was less than 20 N for all flexion angles when a torque between 3.3 and 5.0 N m was applied. Low valgus torque elicited tibial subluxation in the ACL-deficient knee with low in situ ACL forces, similar to a positive pivot shift test. Thus, application of a valgus torque may be suitable to evaluate ACL-deficient and ACL-reconstructed knees, since subluxation can be achieved with minimal harm to the ACL graft. This work is important in understanding one load component needed for the pivot shift examination; further studies quantifying other load components are essential for better comprehension of the in vivo pivot shift examination.

The contribution of the anterior cruciate ligament to knee joint kinematics: Evaluation of its in situ forces using a robot/universal force-moment sensor test system

Damage to one of the major soft tissue structures of the knee joint, namely, the anterior cruciate ligament (ACL), can lead to significant changes in joint kinematics, which the patient perceives as instability. In this manuscript, we illustrate the importance of the anatomical complexity and biomechanical function of the ACL in knee joint kinematics. Further, we introduce a new test system whereby the in situ forces of the ACL and multiple-degree of freedom (DOF) knee kinematics are determined. Using a robotic manipulator coupled with a universal force-moment sensor (UFS), these forces can be determined directly and without making mechanical contact with the tissue. We have found that the in situ force in the human ACL in response to 110N of anterior tibial load decreases significantly with knee flexion, changing from 110.6 ± 14.8N at 15° of flexion to 71.1 ± 29.5N at 90° of flexion. Distribution of the in situ force within the human ACL was determined by consistently defining its distribution in anteromedial (AM) and posterolateral (PL) bundles of the ACL. In situ forces in the PL bundle in response to 110N of anterior tibiat load showed a maximum of 75.2 ± 18.3N at 15°, and were significantly larger than those in the AM bundle. On the contrary, in situ forces in the AM bundle varied from a maximum of 47.4 ± 34.2N at 60° to a minimum of 32.6 ± 13.3N at 0° In the porcine ACL, the magnitude of in situ force was not significantly affected as the constraints varied from 1-DOF to 5-DOF. However, the directions of the force were significantly different between 1-DOF and 5-DOF conditions. The ACL reconstruction study has shown that anatomical (proximal) ACL graft fixation in the tibial tunnel more closely reproduced the knee kinematics and in situ force of the native ACL than those in central and distal fixations. These findings have important implications in terms of the mechanisms of ACL injuries, complexity of the ACL function, and anatomy- and biomechanics-based approaches to ACL reconstruction.

Patellar tendon and anterior cruciate ligament have different mitogenic responses to platelet-derived growth factor and transforming growth factor beta.

The healing responses of the anterior cruciate ligament and the patellar tendon differ markedly. The anterior cruciate ligament fails to heal, whereas the patellar tendon heals slowly. The basis of these differences is unknown. Since cellular proliferation is a critical element of healing, we investigated the response to explants of anterior cruciate ligament and patellar tendon from sheep knees to platelet-derived growth factor-AB and transforming growth factor beta 1 as a function of time and dose. Explants cultured for 48, 72, and 96 hours with transforming growth factor beta 1 (0-100 ng/ml) or platelet-derived growth factor-AB (0-200 ng/ml) were radiolabeled for the final 24 hours with [3H]thymidine, and DNA synthesis was quantified as trichloroacetic acid-precipitable radioactivity normalized to dry tissue weight. Statistical analyses (analysis of variance) showed that transforming growth factor beta 1 induced a significant proliferative response in the anterior cruciate ligament at 96 hours with equivalent responses at 10, 50, and 100 ng/ml, whereas the patellar tendon only responded to one condition, 10 ng/ml at 96 hours. Conversely, the patellar tendon had a significant dose-dependent response to platelet-derived growth factor-AB at 72 and 96 hours, whereas the anterior cruciate ligament showed no proliferative response to platelet-derived growth factor-AB. The minimal response of anterior cruciate ligament to platelet-derived growth factor-AB could explain, at least in part, the poor repair capacity of this tissue. The response of the anterior cruciate ligament to transforming growth factor beta suggests that exogenous transforming growth factor beta may promote initial healing. Although growth factors have the potential to modulate soft-tissue repair, tissue responses in tendons and ligaments may vary at different anatomic sites.