Red Fluorescence Research Articles

Color-reversible fluorescence tracking for the dynamic interaction of SO2 with Hg2+ in living cells

Mercury ion (Hg2+) is one of the most threatening substances to human health, and the mercury poisoning can damage physiological homeostasis severely in human, even cause death. Intriguingly, Sulfur dioxide (SO2), a gas signal molecule in human, can specifically interact with Hg2+ for relieving mercury poisoning. However, the dynamic interaction of Hg2+ with SO2 at the tempospatial level and the correlation between Hg2+ and SO2 in the pathological process of mercury poisoning are still elusive. Herein, we rationally designed a reversible and dual color fluorescent probe (CCS) for dynamically visualizing Hg2+ and SO2 and deciphering their interrelationship in mercury poisoning. CCS held good sensitivity, selectivity and reversibility to Hg2+ and SO2, that enabled CCS to specifically detect SO2 and Hg2+ via cyan fluorescence channel (centered around 485 nm) and red fluorescence channel (centered around 679 nm), respectively. Notably, the separate fluorescence signal changes of CCS realized the dynamic tracing of Hg2+ and SO2 in living cells, and presented the potential for exploring the correlation between SO2 and Hg2+ in mercury poisoning.

Considerable Piezochromism in All‐Inorganic Zero‐Dimensional Perovskite Nanocrystals via Pressure‐Modulated Self‐Trapped Exciton Emission

AbstractPiezochromic materials refer to a class of matters that alter their photoluminescence (PL) colors in response to the external stimuli, which exhibit promising smart applications in anti‐counterfeiting, optoelectronic memory and pressure‐sensing. However, so far, most reported piezochromic materials have been confined to organic materials or hybrid materials containing organic moieties with limited piezochromic range of less than 100 nm in visible region. Here, we achieved an intriguing piezochromism in all‐inorganic zero‐dimensional (0D) Cs3Cu2Cl5 nanocrystals (NCs) with a considerable piezochromic range of 232 nm because of their unique inorganic rigid structure. The PL energy shifted from the lowest‐energy red fluorescence (1.85 eV) to the highest‐energy blue fluorescence (2.83 eV), covering almost the entire visible wavelength range. Pressure‐modulated self‐trapped exciton emission between different energy levels of self‐trapped states within Cs3Cu2Cl5 NCs was the main reason for this piezochromism property. Note that the quenched emission, which is over five times more intense than that in the initial state, is retained under ambient conditions upon decompression. This work provides a promising pressure indicating material, particularly used in pressure stability monitoring for equipment working at extreme environments.

Considerable Piezochromism in All-Inorganic Zero-Dimensional Perovskite Nanocrystals via Pressure-Modulated Self-Trapped Exciton Emission.

Piezochromic materials refer to a class of matters that alter their photoluminescence (PL) colors in response to the external stimuli, which exhibit promising smart applications in anti-counterfeiting, optoelectronic memory and pressure-sensing. However, so far, most reported piezochromic materials have been confined to organic materials or hybrid materials containing organic moieties with limited piezochromic range of less than 100 nm in visible region. Here, we achieved an intriguing piezochromism in all-inorganic zero-dimensional (0D) Cs3Cu2Cl5 nanocrystals (NCs) with a considerable piezochromic range of 232 nm because of their unique inorganic rigid structure. The PL energy shifted from the lowest-energy red fluorescence (1.85 eV) to the highest-energy blue fluorescence (2.83 eV), covering almost the entire visible wavelength range. Pressure-modulated self-trapped exciton emission between different energy levels of self-trapped states within Cs3Cu2Cl5 NCs was the main reason for this piezochromism property. Note that the quenched emission, which is over five times more intense than that in the initial state, is retained under ambient conditions upon decompression. This work provides a promising pressure indicating material, particularly used in pressure stability monitoring for equipment working at extreme environments.

Controlled Amphiphilicity and Thermo-Responsiveness of Functional Copolymers Based on Oligo(Ethylene Glycol) Methyl Ether Methacrylates.

In this work, comb homopolymers as well as comb-type copolymers of thermo-responsive oligo(ethylene glycol methyl ether methacrylate)s, OEGMAs, with various chain lengths (DEGMA, PEGMA500, and PEGMA950 containing 2, 9, or 19 repeating ethylene glycol units, respectively) were synthesized through free radical (co)polymerization. For the copolymers, either the functional hydrophobic glycidyl methacrylate (GMA) or the inert hydrophilic N,N-dimethylacrylamide (DMAM) were selected as comonomers. The self-assembly and thermo-responsive behavior of the products was investigated through Nile Red fluorescence probing, turbidimetry, and dynamic light scattering (DLS). Interestingly, it was found that all OEGMA-based homopolymers exhibit a tendency to self-organize in aqueous media, in addition to thermo-responsiveness. The critical aggregation concentration (CAC) increases with the number of repeating ethylene oxide units in the OEGMA macromonomers (CAC was found to be 0.003, 0.01, and 0.03% w/v for the homopolymers PDEGMA, PPEGMA500, and PPEGMA950, respectively). Moreover, the CAC of the copolymers in aqueous media is highly affected by the incorporation of hydrophobic GMA or hydrophilic DMAM units, leading to lower or higher values, respectively. Thus, the CAC decreases down to 0.003% w/v for the GMA-richest copolymer of PEGMA950, whereas CAC increases up to 0.01% w/v for the DMAM-richest copolymer of DEGMA. Turbidimetry and DLS studies proved that the thermo-sensitivity of the polymers is governed by several parameters such as the number of repeating ethylene glycol groups in the side chains of the OEGMAs, the molar percentage of the hydrophobic or hydrophilic comonomers, along with the addition of salts in the aqueous polymer solutions. Thus, the cloud point of the homopolymer PDEGMA was found at 23 °C and it increases to 33.5 °C for the DMAM-richest copolymer of DEGMA. Lastly, the formation of a hydrogel upon heating aqueous mixtures of the GMA-comprising copolymers with silica nanoparticles overnight is strong evidence of the functional character of these polymers.

Tripeptide-Assisted Gold Nanocluster Formation for Fe3+ and Cu2+ Sensing.

Fluorescent gold nanoclusters (AuNCs) have shown promise as metal ion sensors. Further research into surface ligands is crucial for developing sensors that are both selective and sensitive. Here, we designed simple tripeptides to form fluorescent AuNCs, capitalizing on tyrosine's reduction capability under alkaline conditions. We investigated tyrosine's role in both forming AuNCs and sensing metal ions. Two tripeptides, tyrosine-cysteine-tyrosine (YCY) and serine-cysteine-tyrosine (SCY), were used to form AuNCs. YCY peptides produced AuNCs with blue and red fluorescence, while SCY peptides produced blue-emitting AuNCs. The blue fluorescence of YCY- and SCY-AuNCs was selectively quenched by Fe3+ and Cu2+, whereas red-emitting YCY-AuNC fluorescence remained stable with 13 different metal ions. The number of tyrosine residues influenced the sensor response. DLS measurements revealed different aggregation propensities in the presence of various metal ions, indicating that chelation between the peptide and target ions led to aggregation and fluorescence quenching. Highlighting the innovation of our approach, our study demonstrates the feasibility of the rational design of peptides for the formation of fluorescent AuNCs that serve as highly selective and sensitive surface ligands for metal ion sensing. This method marks an advancement over existing methods due to its dual capability in both synthesizing gold nanoclusters and detecting analytes, specifically Fe3+ and Cu2+.

Guest-Responsive Near-Infrared-Luminescent Metal-Organic Cage Organized by Porphyrin Dyes and Yb(III) Complexes.

Metal-organic cages (MOCs) with luminophores have significant advantages for the facile detection of specific molecules based on turn-on or turn-off luminescence changes induced by host-guest complexation. One important challenge is the development of turn-on-type near-infrared (NIR)-luminescent MOCs. In this study, we synthesized a novel MOC consisting of two porphyrin dyes linked by four Yb(III) complexes, which exhibit bimodal red and NIR fluorescence signals upon photoexcitation of the porphyrin π system. Single-crystal X-ray structural analysis and computational molecular modeling revealed that planar aromatic perfluorocarbons were intercalated into the MOC. The tight packing between the MOC and guests enhanced the NIR fluorescence of Yb(III) by suppressing energy transfer from the photoexcited porphyrin to oxygen molecules. Guest-responsive turn-on NIR fluorescence changes in an MOC were successfully demonstrated.

Enhancing the Red Fluorescence of Carbon Dots: The Role of Mn Doping and Precursor Concentration Control

Enhancing the Red Fluorescence of Carbon Dots: The Role of Mn Doping and Precursor Concentration Control

Chitosan-copper microparticles as doxorubicin microcarriers for bone tumor therapy

Doxorubicin (DOX) is a chemotherapeutic drug used in osteosarcoma treatments, usually administrated in very high dosages. This study proposes novel DOX microcarriers based on chitosan (CHT) physically crosslinked with copper(II) ions that will act synergically to inhibit tumor growth at lower drug dosage without affecting the healthy cells. Spherical CHT-Cu microparticles with a smooth surface and an average size of 30.1 ± 9.1 µm were obtained by emulsion. The release of Cu2+ ions from the CHT-Cu microparticles showed that 99.4 % of added cupric ions were released in 72 h of incubation in a complete cell culture medium (CCM). DOX entrapment in microparticles was conducted in a phosphate buffer solution (pH 6), utilizing the pH sensitivity of the polymer. The successful drug-loading process was confirmed by DOX emitting red fluorescence from drug-loaded microcarriers (DOX@CHT-Cu). The drug release in CCM showed an initial burst release, followed by sustained release. Biological assays indicated mild toxicity of CHT-Cu microparticles on the MG-63 osteosarcoma cell line, without affecting the viability of human mesenchymal stem cells (hMSCs). The DOX@CHT-Cu microparticles at concentration of 0.5 mg mL‒1 showed selective toxicity toward MG-63 cells.

Red emissive fluorescent carbon dots based on ternary carbon source for imaging α-synuclein fibrils

The misfolding and aggregation of α-synuclein monomers usually cause the occurrence and development of Parkinson’s disease (PD). It is important to develop effective methods for detection of α-synuclein aggregates. Carbon dots (CDs) could be the potential fluorescence probe for this purpose owing to their appreciated optical properties. However, undefined structure of CDs and complicated three-dimensional structure of protein severely hindered the design of fluorescence probe towards protein aggregates. Herein, a red emissive fluorescent amphiphilic CD, named as CL-9, was designed with a high sensitivity to α-synuclein fibrils by a one-step heating process, using the ternary carbon source, including Congo red, l-tryptophan and urea. The CL-9 exhibited turn-on red emissive fluorescence towards α-synuclein fibril, but remained no change towards its monomer. Compared with the original Congo red dye, CL-9 exhibited stronger turn-on red fluorescence towards α-synuclein fibrils with better anti-photobleaching resistance, biocompatibility and signal-to-noise ratio. The CL-9 was successful as a fluorescent probe to image α-synuclein fibrils in NL-5901 C. elegans. The present study provided a feasible approach using the multiple carbon sources to construct the CDs based fluorescence probe targeting amyloid proteins.

Spectral Phasor Applied to Spectrally-Resolved Single Molecule Localization Microscopy.

Spectrally-resolved single-molecule localization microscopy (srSMLM) has emerged as a powerful tool for exploring the spectral properties of single emitters in localization microscopy. By simultaneously capturing the spatial positions and spectroscopic signatures of individual fluorescent molecules, srSMLM opens up the possibility of investigating an additional dimension in super-resolution imaging. However, appropriate and dedicated tools are required to fully capitalize on the spectral dimension. Here, we propose the application of the spectral phasor analysis as an effective method for summarizing and analyzing the spectral information obtained from srSMLM experiments. The spectral phasor condenses the complete spectrum of a single emitter into a two-dimensional space, preserving key spectral characteristics for single-molecule spectral exploration. We demonstrate the effectiveness of spectral phasor in efficiently classifying single Nile Red fluorescence emissions from largely overlapping cyanine fluorescence signals in dual-color PAINT experiments. Additionally, we employed spectral phasor with srSMLM to reveal subtle alterations occurring in the membrane of Gram-positive Enterococcus hirae in response to gramicidin exposure, a membrane-perturbing antibiotic treatment. Spectral phasor provides a robust, model-free analytic tool for the detailed analysis of the spectral component of srSMLM, enhancing the capabilities of multi-color spectrally-resolved single-molecule imaging.

Two-Photon Absorption Aggregation-Induced Emission Luminogen/Paclitaxel Nanoparticles for Cancer Theranostics.

Multifaceted nanoplatforms integrating fluorescence imaging and chemotherapy have garnered acknowledgment for their potential potency in cancer diagnosis and simultaneous in situ therapy. However, some drawbacks remain for traditional organic photosensitizers, such as poor photostability, short excitation wavelength, and shallow penetration depth, which will greatly lower the chemotherapy treatment efficiency. Herein, we present lipid-encapsulated two-photon active aggregation-induced emission (AIE) luminogen and paclitaxel (PTX) nanoparticles (AIE@PTX NPs) with bright red fluorescence emission, excellent photostability, and good biocompatibility. The AIE@PTX NPs exhibit dual functionality as two-photon probes for visualizing blood vessels and tumor structures, achieving penetration depth up to 186 and 120 μm, respectively. Furthermore, the tumor growth of the HeLa-xenograft model can be effectively prohibited after the fluorescence imaging-guided and PTX-induced chemotherapy, which shows great potential in the clinical application of two-photon cell and tumor fluorescence imaging and cancer treatment.

Chlorella filled poly(lactic acid) (PLA)/poly(butylene adipate-co-terephthalate) (PBAT) blend bio-composites compatible with additive manufacturing processes: Fluorescent and anti-counterfeiting QR codes applications

Anti-counterfeiting in 3D printing has gained significant attention, however, current approaches often fall short of fully capitalizing on the inherent advantages of personalized manufacturing with this technology. Herein, we propose an embedded anti-counterfeiting scheme for additive manufacturing, accompanied by a novel fluorescent encrypted quick response (QR) method. This approach involves the development of a 3D printing filament utilizing poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) bio-composites as the primary filament matrix, with varying quantities of Chlorella powder incorporated. The resulting filament has a good thermal stability near 200 °C and exhibits a distinctive red fluorescence under ultraviolet light, with the emission peak at 677 nm when excited by 415 nm blue light. Fluorescence imaging analysis confirms that the red fluorescence in 3D printed devices containing Chlorella is a result of the chlorophyll and its derivatives fluorescence effect. The fluorescent encrypted QR codes are inconspicuous in daylight but become easily discernible under ultraviolet light. In the cases of recognizable QR codes, the ∆Eab* values all exceed 35, and the LC/LB values deviate significantly from 1. This research delves into the fluorescence characteristics of Chlorella and highlights its applicability in 3D printing, specifically within the realm of product anti-counterfeiting, presenting a groundbreaking approach.

Phycocyanin-based rapid fluorometric immunoassay for the determination of aflatoxin B1, deoxynivalenol, and zearalenone in food and feed matrices

This study presents a new multiplex lateral flow immunoassay (LFIA) for the detection of aflatoxin B1 (AFB1), deoxynivalenol (DON), and zearalenone (ZEN). The multi-LFIA utilized phycocyanin (PC), a protein with excellent photophysical properties, as a fluorescent indicator for quantifying the three mycotoxins on a lateral flow strip platform. PC and monoclonal antibodies (mAbs) against AFB1, DON, and ZEN were immobilized onto carboxylated latex nanospheres (LNS) through a one-step coupling process. The resulting conjugates with strong red fluorescence were then used for multiplex sensing of AFB1, DON, and ZEN in wheat, corn, and animal feed. The visual results of the assay were obtained using LED UV lights coupled with a smartphone in less than 25 min. Under the optimal conditions, the new multi-LFIA achieved minimum detection limits of 1.04, 1.6, and 2.08 ng/mL for AFB1, 2.2, 6.45, and 2.9 ng/mL for DON, and 1.74, 1.67, and 2.11 ng/mL for ZEN in wheat, corn, and feed, respectively. The proposed method demonstrated high selectivity for AFB1, DON, and ZEN and showed strong correlation with LC-MS/MS results in spiked samples. In summary, the proposed method is feasible, rapid, and could serve as a highly sensitive platform for detecting AFB1, DON, and ZEN and other analytes in a single format.

Antifungal activity of β-lapachone against a fluconazole-resistant Candida auris strain.

Candida spp. can be found in the human microbiome. However, immunocompromised patients are likely to develop invasive Candida infections, with mortality rates higher than 50%. The discovery of C. auris, a species that rapidly acquire antifungal resistance, increased the concern about Candida infections. The limited number of antifungal agents and the high incidence of resistance to them make imperative the development of new antifungal drugs. β-lapachone is a biological active naphthoquinone that displays antifungal activity against C. albicans and C. glabrata. The aim of this study was to evaluate if this substance affects C. auris growth and elucidate its mechanism of action. A fluconazole-resistant C. auris isolate was used in this study. The antifungal activity of β-lapachone was determined through microbroth dilution assays, and its mechanism of action was evaluated using fluorescent probes. Interaction with fluconazole and amphotericin B was assessed by disk diffusion assay and checkerboard. β-lapachone inhibited planktonic C. auris cell growth by 92.7%, biofilm formation by 84.9%, and decrease the metabolism of preformed biofilms by 87.1% at 100µg/ml. At 100µg/ml, reductions of 30% and 59% of Calcofluor White and Nile red fluorescences were observed, indicating that β-lapachone affects cell wall chitin and neutral lipids content, respectively. Also, the ratio 590nm/529nm of JC-1 decreased 52%, showing that the compound affects mitochondria. No synergism was observed between β-lapachone and fluconazole or amphotericin B. Data show that β-lapachone may be a promising candidate to be used as monotherapy to treat C. auris resistant infections.

Capsaicin combined with stem cells improved mitochondrial dysfunction in PIG3V cells, an immortalized human vitiligo melanocyte cell line, by inhibiting the HSP70/TLR4/mTOR/FAK signaling axis.

Vitiligo is a common autoimmune skin disease. Capsaicin has been found to exert a positive effect on vitiligo treatment, and mesenchymal stem cells (MSCs) are also confirmed to be an ideal cell type. This study aimed to explore the influence of capsaicin combined with stem cells on the treatment of vitiligo and to confirm the molecular mechanism of capsaicin combined with stem cells in treating vitiligo. PIG3V cell proliferation and apoptosis were detected using CCK-8 and TUNEL assays, MitoSOX Red fluorescence staining was used to measure the mitochondrial ROS level, and JC-1 staining was used to detect the mitochondrial membrane potential. The expression of related genes and proteins was detected using RT‒qPCR and Western blotting. Coimmunoprecipitation was used to analyze the protein interactions between HSP70 and TLR4 or between TLR4 and mTOR. The results showed higher expression of HSP70 in PIG3V cells than in PIG1 cells. The overexpression of HSP70 reduced the proliferation of PIG3V cells, promoted apoptosis, and aggravated mitochondrial dysfunction and autophagy abnormalities. The expression of HSP70 could be inhibited by capsaicin combined with MSCs, which increased the levels of Tyr, Tyrp1 and DCT, promoted the proliferation of PIG3V cells, inhibited apoptosis, activated autophagy, and improved mitochondrial dysfunction. In addition, capsaicin combined with MSCs regulated the expression of TLR4 through HSP70 and subsequently affected the mTOR/FAK signaling pathway CONCLUSIONS: Capsaicin combined with MSCs inhibits TLR4 through HSP70, and the mTOR/FAK signaling pathway is inhibited to alleviate mitochondrial dysfunction and autophagy abnormalities in PIG3V cells.

A low-molecular-weight, long-wavelength emissive Coumarin: Green synthesis, spectral properties, fluorescence enhancement and solvatochromism application

In this study, a novel low-molecular-weight coumarin fluorescent dye, 3,4-dicyano-7-diethylaminocoumarin, was designed. This dye features a donor-π-bridge-acceptor (D-π-A) conjugated structure, which confers superior fluorescence properties.The dye was synthesized using a simple, efficient, and environmentally friendly two-step process, facilitating the direct conversion of the key intermediate into the final product via simultaneous addition and elimination reactions. A comprehensive structural characterization of the dye was undertaken, and its UV absorption and fluorescence emission properties were extensively analyzed using spectroscopic techniques, with structural explanations of the fluorescence activities provided by the Density Functional Theory (DFT) method.Experimental results revealed that this coumarin dye emits strong fluorescence, characterized by a long wavelength, a large Stokes shift, and high fluorescence intensity. It exhibits excellent fluorescent performance in various solvents. Despite experiencing fluorescence quenching in its solid state, the formation of an inclusion complex with β-cyclodextrin restores strong red fluorescence, presenting new possibilities for biofluorescence imaging. Notably, this coumarin dye also demonstrates a significant solvatochromic effect. This effect enables rapid visual discrimination among multiple sets of structurally and chemically similar organic solvents. Consequently, the dye holds promise as a versatile solvatochromic fluorescent probe for a broad spectrum of applications.

Influence of Biofilm Maturity on the Antibacterial Efficacy of Cold Atmospheric Plasma in Oral Microcosm Biofilms.

As biofilms mature, biomass and extracellular polysaccharide (EPS) content increases, enhancing pathogenicity. Therefore, this study aimed to evaluate the antibacterial efficacy of cold atmospheric plasma (CAP) against oral microcosm biofilms and the influence of biofilm maturity on treatment. Oral microcosm biofilms were cultured on hydroxyapatite disks for 2 and 6 days. Based on the treatment and biofilm maturity, these were subsequently allocated into six groups (N = 19 each): Groups 1 and 2 were incubated with distilled water for 1 min; Groups 3 and 4 were treated with CAP for 2 min, and Groups 5 and 6 were treated with 0.12% chlorhexidine gluconate for 1 min. Groups 1, 3, and 5 represent 2-day biofilms, and Groups 2, 4, and 6 represent 6-day biofilms. Treatments were repeated daily for 5 days. Antibacterial efficacy was analyzed by measuring oral biofilms' red fluorescence intensity (RatioR/G) and quantifying EPS content and bacterial viability. The RatioR/G was 1.089-fold and 1.104-fold higher in Groups 4 and 6 than in Groups 3 and 5 following antibacterial treatment, respectively (p < 0.001). EPS content increased by 1.71-fold in Group 6 than in Group 5 (p < 0.001). Bacterial survival rate was the lowest in Group 3 (p = 0.005). These findings underscore the relevance of CAP treatment in maintaining antibacterial efficacy regardless of the biofilm development stage, highlighting its potential utility in oral care.

A novel red fluorescent and dynamic nanocomposite hydrogel based on chitosan and alginate doped with inclusion complex of carbon dots

Red fluorescent hydrogels possessing injectable and self-healing properties have widespread potential in biomedical field. It is still a challenge to achieve a biomacromolecules based dynamic hydrogels simultaneously combining with excellent red fluorescence, good mechanical properties, and biocompatibility. Here we first explore hydrophilic inclusion complex of (R-CDs@α-CD) derived from hydrophobic red fluorescent carbon dots (R-CDs) and α-cyclodextrin (α-CD), and then achieved a red fluorescent and dynamic polysaccharide R-CDs@α-CD/CEC-l-OSA hydrogel. The nanocomposite hydrogel can be fabricated through controlled doping of red fluorescent R-CDs@α-CD into dynamic polymer networks, taking reversibly crosslinked N-carboxyethyl chitosan (CEC) and oxidized sodium alginate (OSA) as an example. The versatile red fluorescent hydrogel simultaneously combines the features of injection, biocompatibility, and augmented mechanical properties and self-healing behavior, especially in rapid self-recovery even after integration. The R-CDs@α-CD uniformly dispersed into dynamic hydrogel played the role of killing two birds with one stone, that is, endowing red emission of a hydrophilic fluorescent substance, and improving mechanical and self-healing properties as a dynamic nano-crosslinker, via forming hydrogen bonds as reversible crosslinkings. The novel red fluorescent and dynamic hydrogel based on polysaccharides is promising for using as biomaterials in biomedical field.

Catalyst-regulated conversion of p-phenylenediamine-based carbon dots from red to deep-blue emission

Deep-blue emission (＜450 nm) is significant in high-density information storage, solid-state lighting, and vivid displays. However, the carbon dots (CDs) obtained from p-phenylenediamine (pPD) have only red fluorescence, which greatly limits the application and development of pPD-based CDs. As we all know, a catalyst is a substance that can change the rate and pathway of a chemical reaction. Herein, we designed to add a catalyst to realize the conversion of pPD-based CDs from red to deep-blue fluorescence. The emission peak of obtained deep-blue CDs was 440 nm, and the full-width at half-maximum (FWHM) was only 58 nm, with a high color purity. In addition, through in-depth analysis of microstructure and photoluminescence (PL) properties, it is found that the decrease of the sp2-conjugated domain and the graphite N content and the increase in pyridinic N content were the main reasons for the blue shift of the spectra. Based on this, the formation process and mechanism of red and deep-blue CDs were further elucidated. This work not only efficiently realized the design of the deep-blue CDs but also provided a new idea for the luminescence regulation of CDs without changing the raw materials and reaction conditions.

Development of a multiplex one-tube loop-mediated isothermal amplification method for rapidly simultaneous detection of the mecA and nuc genes in methicillin-resistant Staphylococcus aureus

This study developed a multiplex one-tube loop-mediated isothermal amplification method using fluorescent dye-labeled DNA probes (mfLAMP) for the rapid simultaneous detection of the nuc (S. aureus-specific marker) and mecA genes (PBP2a-specific marker) in methicillin-resistant Staphylococcus aureus (MRSA). In the mfLAMP method, a graphene oxide (GO) was used as an effective adsorbent to eliminate free fluorescent dye-labeled DNA probes (mecAf-probe: Cy5-ssDNA-Biotin and nucf-probe: FAM-ssDNA-Biotin) present in negative results. The samples were then measured using a developed program that enable simultaneous detection of fluorescein (FAM) and Cyanine5 (Cy5). Green fluorescence represents the detection of the nuc gene, red fluorescence indicates the detection of the mecA gene, and yellow fluorescence signifies the detection of MRSA. The mfLAMP was specific to MRSA and could detect 10°CFU/mL of MRSA in standard buffer and artificially inoculated irrigation water. The recovery rate from contaminated irrigation water ranged from 100.41 to 109.85 %. This study is the first to report the mfLAMP using GO, which could be point-of-care testing for the rapid and simultaneous detection of MRSA's nuc and mecA genes. The results demonstrate that the mfLAMP will be a novel tool for simultaneously detecting more than two target genes or bacteria within 1 h without an enrichment step.