Volume Expansion Research Articles

Honeycomb-like N-Doped Carbon Matrix-Encapsulated Co1−xS/Co(PO3)2 Heterostructures for Advanced Lithium-Ion Capacitors

Lithium-ion capacitors (LICs) are emerging as promising hybrid energy storage devices that combine the high energy densities of lithium-ion batteries (LIBs) with high power densities of supercapacitors (SCs). Nevertheless, the development of LICs is hindered by the kinetic imbalances between battery-type anodes and capacitor-type cathodes. To address this issue, honeycomb-like N-doped carbon matrices encapsulating Co1−xS/Co(PO3)2 heterostructures were prepared using a simple chemical blowing-vulcanization process followed by phosphorylation treatment (Co1−xS/Co(PO3)2@NC). The Co1−xS/Co(PO3)2@NC features a unique heterostructure engineered within carbon honeycomb structures, which efficiently promotes charge transfer at the interfaces, alleviates the volume expansion of Co-based materials, and accelerates reaction kinetics. The optimal Co1−xS/Co(PO3)2@NC composite demonstrates a stable reversible capacity of 371.8 mAh g−1 after 800 cycles at 1 A g−1, and exhibits an excellent rate performance of 242.9 mAh g−1 even at 8 A g−1, alongside enhanced pseudocapacitive behavior. The assembled Co1−xS/Co(PO3)2@NC//AC LIC delivers a high energy density of 90.47 Wh kg−1 (at 26.28 W kg−1), a high power density of 504.94 W kg−1 (at 38.31 Wh kg−1), and a remarkable cyclic stablitiy of 86.3% retention after 5000 cycles. This research is expected to provide valuable insights into the design of conversion-type electrode materials for future energy storage applications.

A Na-Li dual cation liquid metal battery with high electrode utilization and high cycling stability

Liquid metal batteries (LMBs) with Na anode exhibit the advantages of low-cost, high-safety, long-lifespan, and easy scale-up, making them promising for large-scale energy storage applications. However, the high solubility of Na and its sluggish kinetics in discharge products result in severe self-discharge and low cathode utilization, significantly hindering the development of Na-based LMBs. In this study, a stable Na-Li dual cation LMB with metal Sb cathode is designed based on the in-situ displacement reaction between Na and molten salts of lithium halides electrolyte. This design effectively suppresses the self-discharge of the battery, and the multistage discharge mechanism of the dual-cation system enhances cathode utilization. Moreover, the self-healing property of the Sb cathode protects the electrode against volume expansion and degradation, enhancing cycling performance. The Na-Li| LiCl-KCl-NaCl |Sb cell was constructed and operated at 485 °C. The battery retained 97.02 % of its capacity after 800 cycles at 0.6 C, with a decay rate of 0.00373 % per cycle. Furthermore, the battery achieves a cathode material utilization of 89 % at 0.6 C. These improvements effectively promote the development and application of LMBs.

Applying the driver-pressure-state-impact-response model to ecological restoration: A case study of comprehensive zoning and benefit assessment in Zhejiang Province, China

Ecosystem degradation is a global problem that poses a significant threat to the sustainable development of human societies, particularly in developing countries, such as China. In response, China has implemented a series of ecological restoration (ER) policies over recent years. However, significant regional developmental disparities, pronounced spatial heterogeneity of ecological issues, and substantial historical debt for ER in China present considerable obstacles and financial burdens to the effective implementation of ER strategies. Delineating ER zones and assessing the ER benefits are essential for developing effective ER strategies and implementing ER projects. In this study, we constructed a comprehensive framework for ER utilizing the Driver-Pressure-State-Impact-Response (DPSIR) model, quantified the urbanization levels, ecological state, and restoration costs in Zhejiang Province to delineate ER zones, integrated the patch-generating land use simulation model with the ecosystem service value assessment method to quantify the benefits of ER, and ultimately developed tailored ER strategies. The results showed that: (1) The pattern of urbanization levels was characterized by high levels in the northeast and low levels in the southwest, which constrated with the ecological state. The areas of high restoration costs were located in the northeastern and southeastern regions, and the areas of low restoration costs were situated in the southwestern region. (2) The rate of construction land expansion is significantly curtailed under the ER scenario compared to the natural development scenario in 2035, while forest areas have seen effective protection and an increase from the levels of 2020. (3) The ER policy is projected to generate ecological benefits totaling CNY 8.23 billion by 2035, substantially reducing the rate of ecosystem degradation. (4) Zhejiang Province is divided into five zones at the county scale: ecological autonomous protection zone, ecological core protection zone, ecological priority restoration zone, ecological control zone, and moderate development zone. Strategies have been devised based on the forecasted benefits of ER, offering valuable insights into ecological management. These findings aim to enhance the understanding of ER and support the development and implementation of regional ecological policies.

Volume, increment, and aboveground biomass data series and biomass conversion and expansion factors for the main forest types of EU Member States

Key messageThis collection reports the standing stock volume, increment, aboveground biomass, and biomass conversion and expansion factors attributed to 222 forest types and 48 different management types, representative of 25 EU Member States. DOI: https://zenodo.org/records/11387301.

Nanosizing strategy to fabricate uniformly dispersed NiO/Ni/lignin porous carbon composites for high lithium storage

Nickel oxide is considered a promising anode material for lithium-ion batteries. Nevertheless, its performance is hindered by significant volume expansion and low electrical conductivity, particularly at larger particle sizes, which lead to a notable decrease in lithium storage capacity and rate performance. To address these challenges, we introduce a nanocomposite strategy to synthesise nickel oxide and lignin-derived porous carbon composites (LPC/Ni/NiO). Through in situ polymerization, lignin macromolecules form a uniform 3D network with nickel carbonate, which, during the subsequent carbonisation process, results in the formation of nickel oxide within a conductive carbon network. This approach reduces the nickel oxide to nanosize and enhances the composite's electrical conductivity, effectively integrating the buffering framework of porous carbon with the high storage capacity of nickel oxide. As a result, the LPC/Ni/NiO composite exhibited significantly improved lithium storage capacity. Notably, when employed as an anode material in lithium-ion half-cells, the optimized composite maintained an excellent specific capacity of 1065 mAh/g after 100 cycles at a current density of 0.2 A/g. It also shown exceptional rate performance, delivering a specific discharge capacity of 505 mAh/g at a current density of 2 A/g, with stable cycling performance. The electrochemical reaction process was further validated using in ex-situ EIS. This study offers valuable insights into scalable synthesis methods for oxide nanocomposites, highlighting their potential as promising anode materials for lithium-ion batteries.

Stability under electron irradiation of some layered hydrated minerals

The structural damages caused to some layered hydrated minerals by 2.5 MeV electron irradiation using the SIRIUS platform were studied by powder X-Ray diffraction and, in some cases, by 1H MAS-NMR spectroscopy. It is clearly demonstrated that the radiation damages are distinguishable from the heating effects. It is shown that: i) in all cases electron irradiation leads to distortions of the unit cell and very limited volume expansion, compared to heating; ii) radiation damages increase with increasing the structural complexity of the mineral; iii) portlandite Ca(OH)2 and brucite Mg(OH)2 remain crystalline up to high doses (a few GGy), with appearance of stacking fault disorder especially in brucite; iv) brushite CaHPO4.2H2O and gypsum CaSO4.2H2O undergo a phase transformation of type amorphization for brushite involving the strongest intralayer H bond between the acidic proton and the phosphate tetrahedral, and decomposition for gypsum involving interlayer H bonds between water molecules.

Three-dimensional porous structure CoP/N-doped carbon nanospheres as anode for enhanced lithium storage performance

Transition metal phosphides (TMPs) with high theoretical capacities and safe operating voltage are recognized as prospective anode materials for lithium-ion batteries (LIBs). While, the huge volume expansion and low conductivity of TMPs still restrict their applications. Engineering nanostructured composites consisting of TMPs and conductive carbon-based materials is of great importance to improve electrochemical performance. Herein, a novel and facile pyrolysis-oxidation-phosphidation approach is designed to fabricate porous nanospheres composing of CoP nanoparticles and N-doped carbon substrate. The abundant pores in CoP/N-C provide ample active sites for lithium storage and facilitate Li+ transport. The introduction of N-doped carbon substrate enhances the electrical conductivity, allowing CoP to maintain its structure during cycling. The CoP/N-C anode achieves remarkable cycle performance, maintaining an extremely stable cycle life over 2000 cycles at 5 A g−1. More importantly, the full cell consisting of CoP/N-C and LiFePO4 also exhibits a prominent cycling durability with a capacity retention of 96.5 % at 0.1 A g−1 after 150 cycles. This work proposes a simple and feasible structural engineering strategy, which can provide a new way for optimizing the electrochemical performance of conversion-type anode materials.

Polydopamine derived carbon coated cobalt molybdenum layered double hydroxide as highly stable anode materials of sodium-ion battery

Two-dimensional layered double hydroxide (LDH) has promising open spaces for efficient Na+ diffusion/migration. Also, cobalt-based materials have high theoretical capacities and molybdenum incorporations can enhance electrical conductivity. Therefore, cobalt and molybdenum LDH is considered as an efficient anode material of sodium-ion battery (SIB). Nevertheless, volume expansion of LDH may limits the electrochemical performance of SIB. In this work, polydopamine (PDA) derived carbon coated cobalt molybdenum LDH (CoMoLDH) is synthesized via the hydrothermal, polymerization and carbonization processes as a novel anode material of SIB. Hydrothermal and polymerization durations are optimized to regular the morphology of CoMoLDH and achieve the suitable thickness of carbon layer. The optimal carbon coated CoMoLDH (CoMoLDH-C-PDA) anode shows a high specific capacity of 779.9 mAh/g at 0.05 A/g. After 100 cycles, the CoMoLDH-C-PDA anodes still presents a specific capacity of 310.9 mAh/g corresponding to capacity retentions of 70.0%. High specific capacity, excellent rate performance and long-term cyclic ability of CoMoLDH-C-PDA are attributed to the higher Na+ diffusion coefficient and smaller charge-transfer resistances. This study brings a blueprint for modifying novel bimetallic LDH with well-designed carbon coating, which is worthy to apply on other bimetallic LDH for enhancing rate performance and cycle life of SIB in the future.

Excellent Barocaloric Effect by Modulating Geometrical Frustrations in Mn3Pt.

Barocaloric materials hold great promise for next-generation solid-state cooling devices because of their green and efficient cooling performance. The insights into low-pressure-driven barocaloric materials are expected to pave the way for the widespread application of barocaloric refrigeration technology. Here, we reveal the low-pressure-driven large barocaloric effect (BCE) modulated by geometrical frustrations in Mn3Pt. The highest sensitivity to pressure of Mn3Pt in metal BCE materials results in an excellent temperature-change strength of 9.77 K 100-1 MPa-1. Neutron powder diffraction and first-principles calculations point out the dual effect of geometrical frustration on modulating the unusual BCE, which not only induces giant volume expansion by inspiring strong spin fluctuation and magnetic moment but also enhances the sensitivity of magnetic phase transition. The model of the dual effect of geometrical frustration in magnets with geometrical frustration is established, which will promote the research progress of barocaloric refrigeration devices.

Buoyancy regulation in insects.

Multiple insect lineages have successfully reinvaded the aquatic environment, evolving to complete either part or all of their life cycle submerged in water. While these insects vary in their reliance on atmospheric oxygen, with many having the ability to extract dissolved oxygen directly from the water, all retain an internal air-filled respiratory system, their tracheal system, due to their terrestrial origins. However, carrying air within their tracheal system, and even augmenting this volume with additional air bubbles carried on their body, dramatically increases their buoyancy which can make it challenging to remain submerged. But by manipulating this air volume a few aquatic insects can deliberately alter or regulate their position in the water column. Unlike cephalopods and teleost fish that control the volume of gas within their hydrostatic organs by either using osmosis to pull liquid from a rigid chamber or secreting oxygen at high pressure to inflate a flexible chamber, insects have evolved hydrostatic control mechanisms that rely either on the temporary stabilization of a compressible air-bubble volume using O2 unloaded from hemoglobin, or the mechanical expansion and contraction of a gas-filled volume with rigid, gas-permeable walls. The ability to increase their buoyancy while submerged separates aquatic insects from the buoyancy compensation achieved by other air-breathing aquatic animals which also use air within their respiratory systems to offset their submerged weight. The mechanisms they have evolved to achieve this are unique and provide new insights into the function and evolution of mechanochemical systems.

Numerical investigation of magnetic reconnection in Jupiter’s dayside magnetodisc

Dayside magnetodisc reconnection is a unique process that may occur in rapidly rotating magnetospheres with internal plasma sources, and it is not expected at Earth. Several observations suggest that dayside magnetodisc reconnection could be driven in the Kronian magnetosphere. This raises the question as to whether it can occur at Jupiter, the fastest rotating planet in the Solar System. Recent reports have suggested its occurrence, but the limited number of identified events leaves the overall global picture in the Jovian magnetosphere uncertain. The primary objective of this study is to answer whether dayside magnetodisc reconnection could exist within the Jovian magnetosphere through the use of global magnetohydrodynamics (MHD) simulations. Additionally, we aim to conduct a numerical investigation to reveal its general distribution for possible future exploration. The numerical simulations for Jovian magnetospheric dynamics are based on three-dimensional MHD calculations, which enable magnetic reconnection through numerical resistivity. In post-processing procedures, the simulated magnetodisc reconnection event is primarily identified by equatorial $B_ reversals, accompanied by an analysis of local plasma flows and global magnetic field lines. Our global MHD simulations reveal the existence of magnetodisc reconnection within the dayside Jovian magnetosphere. The simulation results indicate that dayside magnetodisc reconnection is more likely to occur during solar wind rarefaction, primarily due to the rapid expansion of the dayside magnetospheric volume. This expansion allows a rotation-driven centrifugal force to generate sufficient magnetic field line stretching for current sheet thinning and reconnection. In simulated dayside events, $B_ reversals may occur locally or non-locally through rotational transport from reconnection sites at earlier magnetic local times. The existence and the features derived from simulations are testable as Galileo/Juno has accumulated a considerable amount of dayside magnetospheric data. These results are valuable for future Jovian missions, such as JUICE and Europa Clipper, and provide new insights into interpreting measurements from other rapidly rotating systems.

Reduction in the risk of contrast-induced nephropathy using enhanced external counter-pulsation in patients with chronic kidney disease

Objective To evaluate the efficacy of EECP in the prevention of contrast-induced nephropathy (CIN) in patients with chronic kidney disease (CKD). Methods A prospective trial was undertaken in the participants. A total of 280 patients with an estimated glomerular filtration rate (eGFR) of <60 ml/min/1.73 m2 who underwent percutaneous coronary artery procedures were enrolled and divided into two groups: the control group (n = 100) and the EECP group (n = 180). All patients received extracellular fluid volume expansion therapy with 0.9% normal saline, and patients in the EECP groups were also treated with EECP. The renal function indexes of the two groups were determined 48–72 h after coronary artery procedures. Results In the EECP group, the BUN and serum creatinine (Scr) after coronary artery procedures were significantly lower than those before coronary artery procedures (BUN: 8.4 ± 3.5 vs. 6.6 ± 2.7 mmol/L, p < 0.001; Scr: 151.9 ± 44.7 vs. 144.5 ± 48.3 μmol/L, p < 0.001), while the eGFR was significantly increased (43.6 ± 11.4 vs. 47.1 ± 13.9 ml/min/1.73 m2, p < 0.001). The degree of Scr elevation was lower in the EECP group than in the control group (12.4 ± 15.0 vs. 20.9 ± 24.8 μmol/L, p = 0.026). Additionally, the EECP group had a lower incidence of post-procedures Scr elevation than the control group (36.5 vs. 48.0%, p = 0.042), a higher incidence of post-procedures eGFR elevation (62.2 vs. 48.0%, p = 0.021), and a lower risk of CIN (1.1 vs. 6.0%, p = 0.019). Conclusion EECP therapy has a protective effect on renal function and can reduce the risk of CIN in patients with CKD.

Effect of cephalosporin injection postoperative after cell assisted lipografting in fat survival and improving post burn scar quality

Scars have always been an issue, and the majority of treatments have failed to address them adequately. The biggest obstacle that plastic surgeons still face is finding an effective procedure that works for all skin types in the long run. In a non-invasive way, external volume expansion (EVE) devices use suction to mechanically stretch and stimulate tissues. Different studies have proposed various mechanisms for how stretch releases the skin, including mechanical action on individual cells, inflammation, ischemia, and soluble mediators that promote cell proliferation, adipogenesis, and most crucially, vascular remodeling. Platelet-rich plasma (PRP) is a product made from autologous blood that is concentrated in plasma volume and contains an abundance of platelets, growth factors, and chemo/cytokines. The contents of the alpha and dense granules in PRP have the ability to provide a high concentration of growth factors to the tissues that need them. Autologous fat grafting, initially described by Neuber in 1893 and subsequently improved by Coleman, is a relatively new alternative to scar tissue removal. It is believed that autologous fat grafting improves skin quality by increasing dermal thickness and volume via stimulating the neosynthesis of collagen fibers. It is still unclear what impact autologous fat grafting has on scar tissue, despite its growing popularity in the medical field, and the use of postoperative cephalosporin is very essential for guarding against infection and losing of fat. Critics have cast doubt on its usefulness due to the fact that survival rates can range from 30% to 80% , the infection rate and loss of fat

Automated manufacturing and characterization of clinical grade autologous CD20 CAR T cells for the treatment of patients with stage III/IV melanoma.

Point-of-care (POC) manufacturing of chimeric antigen receptor (CAR) modified T cell has expanded rapidly over the last decade. In addition to the use of CD19 CAR T cells for hematological diseases, there is a growing interest in targeting a variety of tumor-associated epitopes. Here, we report the manufacturing and characterization of autologous anti-CD20 CAR T cells from melanoma patients within phase I clinical trial (NCT03893019). Using a second-generation lentiviral vector for the production of the CD20 CAR T cells on the CliniMACS Prodigy®. We demonstrated consistency in cell composition and functionality of the products manufactured at two different production sites. The T cell purity was >98.5%, a CD4/CD8 ratio between 2.5 and 5.5 and transduction rate between 34% and 61% on day 12 (harvest). Median expansion rate was 53-fold (range, 42-65-fold) with 1.7-3.8×109 CAR T cells at harvest, a sufficient number for the planned dose escalation steps (1×105/kg, 1×106/kg, 1×107/kg BW). Complementary research of some of the products pointed out that the CAR+ cells expressed mainly central memory T-cell phenotype. All tested CAR T cell products were capable to translate into T cell activation upon engagement of CAR target cells, indicated by the increase in pro-inflammatory cytokine release and by the increase in CAR T cell amplification. Notably, there were some interindividual, cell-intrinsic differences at the level of cytokine release and amplification. CAR-mediated T cell activation depended on the level of CAR cognate antigen. In conclusion, the CliniMACS Prodigy® platform is well suited for decentralized POC manufacturing of anti-CD20 CAR T cells and may be likewise applicable for the rapid and automated manufacturing of CAR T cells directed against other targets. https://clinicaltrials.gov/study/NCT03893019?cond=Melanoma&term=NCT03893019&rank=1, identifier NCT03893019.

Cosmology of dark energy radiation

In this work, we quantify the cosmological signatures of dark energy radiation—a novel description of dark energy, which proposes that the dynamical component of dark energy is comprised of a thermal bath of relativistic particles sourced by thermal friction from a slowly rolling scalar field. For a minimal model with particle production emerging from first principles, we find that the abundance of radiation sourced by dark energy can be as large as ΩDER=0.03, exceeding the bounds on relic dark radiation by three orders of magnitude. Although the background and perturbative evolution of dark energy radiation are distinct from Quintessence, we find that current and near-future cosmic microwave background and supernova data will not distinguish these models of dark energy. We also find that our constraints on all models are dominated by their impact on the expansion rate of the Universe. Considering extensions that allow the dark radiation to populate neutrinos, axions, and dark photons, we evaluate the direct detection prospects of a thermal background comprised of these candidates consistent with cosmological constraints on dark energy radiation. Our study indicates that a resolution of ∼6 meV is required to achieve sensitivity to relativistic neutrinos compatible with dark energy radiation in a neutrino capture experiment on tritium. We also find that dark matter axion experiments lack sensitivity to a relativistic thermal axion background, even if enhanced by dark energy radiation, and dedicated search strategies are required to probe new parameter space. We derive constraints arising from a dark photon background from oscillations into visible photons, and find that viable parameter space can be explored with the late dark energy radiation experiment. Published by the American Physical Society 2024

Multi-angle research on the performance of self-foaming filling materials and analysis of engineering applications

Utilizing self-foaming filling material to fill the hollow area is an effective way to settle the issues of low rate and poor effect of filling and roofing in the large stope. There are fewer studies related to the expansion rate, hydration exotherm and strength properties of self-foaming fillers in mines. Based on this, this paper investigates the expansion characteristics, hydration exothermic characteristics and compressive strength characteristics of the self-foaming filler under different cement-tailings ratios (1:4, 1:6, 1:8), reveals the hydration reaction mechanism of the material and its microscopic characteristics through XRD, TG and SEM tests, and evaluates the application effect and economy of the self-foaming filler in practical engineering with the background of Mashong Iron Ore Mine. The main findings are as follows: (1) The volumetric expansion of self-foaming filling material can be divided into the initial stage Ⅰ (0–1.5 h), the rapid reaction stage Ⅱ (1.5–8 h) and the stabilization stage, and as the cement-tailings ratio grows, the expansion rate of the filling body increases, and the expansion rate of the filling material with 1:4 ratio is as high as 20.4 %. (2) The hydration process of a self-foaming filled body does not contain induction and acceleration stages; under the same conditions, the self-foaming filled body has more exothermic heat of hydration than that of a self-foaming filled body by about 50 J/g, and the bigger the cement-tailings ratio, the bigger the hydration exothermic rate and exothermic quantity. (3) The compressive strength of self-foaming filler is inferior to the strength of conventional filler, the higher the cement-tailings ratio, the greater the degree of hydration, the more hydration products are produced, and the greater the compressive strength. (4) The bigger the ratio of gray sand, the greater the proportion of macropores and the actual engineering of self-foaming filling materials to catch the top rate of up to 98 %, directly saving the total cost of 11.6 %. The above research results can offer theoretical support and scientific guidance for the utilization of spontaneous foam materials to fill the goaf and control the roof rate, temperature, and strength of the stope.

In Situ Construction of Crumpled Ti3C2Tx Nanosheets Confined S-Doping Red Phosphorus by Ti-O-P Bonds for LIBs Anode with Enhanced Electrochemical Performance.

Red phosphorus (RP) with a high theoretical specific capacity (2596 mA h g-1) and a moderate lithiation potential (∼0.7 V vs Li+/Li) holds promise as an anode material for lithium-ion batteries (LIBs), which still confronts discernible challenges, including low electrical conductivity, substantial volumetric expansion of 300%, and the shuttle effect induced by soluble lithium polyphosphide (LixPPs). Here, S-NRP@Ti3C2Tx composites were in situ prepared through a phosphorus-amine-based method, wherein S-doped red phosphorus nanoparticles (S-NRP) grew and anchored on the crumpled Ti3C2Tx nanosheets via Ti-O-P bonds, constructing a three-dimensional porous structure which provides fast channels for ion and electron transport and effectively buffers the volume expansion of RP. Interestingly, based on the results of adsorption experiments of polyphosphate and DFT calculation, Ti3C2Tx with abundant oxygen functional groups delivers a strong chemical adsorption effect on LixPPs, thus suppressing the shuttle effect and reducing irreversible capacity loss. Furthermore, S-doping improved the conductivity of red phosphorus nanoparticles, facilitating Li-P redox kinetics. Hence, the S-NRP@Ti3C2Tx anode demonstrates outstanding rate performance (1824 and 1090 mA h g-1 at 0.2 and 4.0 A g-1, respectively) and superior cycling performance (1401 mAh g-1 after 500 cycles at 2.0 A g-1).

Micron silicon-oxide-carbon coated with TiOx(OH)y layer as better performance anode for lithium-ion batteries

Micron-silicon based material is a promising anode material for high performance lithium batteries due to its ultra-high specific capacity. However, the volume expansion exceeds 300 % during charging and discharging, resulting in the collapse of the electrode structure and a rapid decline in electrochemical performance. Coating the surface of silicon-based materials with flexible ionic conductors is an effective method to maintain their high capacity and suppress swelling. Here, to further improve the electrochemical performance of silicon-based materials, we have deposited a titanate-type ionic conductor layer on a micron-sized silicon-carbon oxide (SiOX-C) material to synthesize the SiOX-C@TiOx(OH)y material. The TiOx(OH)y layer not only exhibits the elastic properties of a superpolymer to mitigate swelling strain, but also has a fast capacitance effect to improve its rate performance. In addition, the interfacial charge transport of SiOX-C@TiOx(OH)y is enhanced due to the structural diversity of the TiOx(OH)y layer. For the above mechanisms, the SiOX-C@TiOx(OH)y has a specific capacity of 278.3 mAh g−1 under high current of 3500 mA g−1. Meanwhile, the SiOX-C@TiOx(OH)y with the capacity retention of 67 % is achieved at 2000 mA g−1 after 100 cycles.

Effects of resveratrol on aortic growth in patients with Marfan syndrome: a single-arm open-label multicentre trial

BackgroundResveratrol, a dietary supplement that intervenes in cellular metabolism, has been shown to reduce aortic growth rate in a mouse model of Marfan syndrome (MFS), a condition associated in humans...

A Novel Structured Si‐Based Composite with 2D Structured Graphite for High‐Performance Lithium‐Ion Batteries

AbstractSilicon is a promising alternative to graphite anodes for achieving high‐energy‐density in lithium‐ion batteries (LIBs) because of its high theoretical capacity (3579 mAh g−1). However, silicon anode must be developed to address its disadvantages, such as volume expansion and low electronic conductivity. Therefore, the use of silicon as composed with graphite and carbon anode materials is investigated, which requires properties such as a spherical morphology for high density and encapsulation of silicon particles in the composite. Herein, a graphite@silicon@carbon (Gr@Si@C) micro‐sized spherical anode composite is synthesized by mechanofusion process. This composite comprises an outer surface, middle layer, and core pore, which are formed by the capillary force arising from 2D structured graphite and pitch properties. This structure effectively addresses the intrinsic issues associated with Si. Gr@Si@C exhibits a high capacity of 1622 mAh g−1 and capacity retention of 72.2% after 100 cycles, with a high areal capacity 4.2 mAh cm−2. When Gr@Si@C is blended with commercial graphite, the composite exhibits high capacity retention and average Coulombic efficiency after cycling. The Gr@Si@C blended electrode exhibits a high energy density of 820 Wh L−1 with ≈16% metallic Si in the electrode (40 wt.% composite), enabling the realization of practical commercial LIBs.