Range Of Elasticity Research Articles

The transfer function method reveals how age‐structured populations respond to environmental fluctuations with serious implications for fisheries management

AbstractFluctuations in wild fish populations result from interaction between population dynamics and environmental forcing. Age‐structured populations can magnify or dampen particular frequencies of these fluctuations, depending on life cycle and species traits. The transfer function (TF) gives a detailed analytical description of these phenomena. In this study, we derive a generalized form of TF to investigate the fluctuations of fish populations in response to species traits and environmental noise characteristics. We found that for semelparous species, fluctuations in fish stocks log‐size are directly proportional to the recruitment elasticity and inversely proportional to the age of maturity, and for iteroparous species, fluctuations in fish stocks log‐size are inversely proportional to the adult lifespan. In addition to the already known effect of cohort resonance (increased sensitivity to environmental fluctuations on cohort timescales in the elastic range of recruitment elasticity), we find a stock resonance effect (increased sensitivity to environmental fluctuations on double cohort timescales in the inelastic range of recruitment elasticity). These results were then applied to fisheries management. The relationship between fishing mortality and species‐specific variability of fish stocks was formalized. In accordance with this analysis, precautionary levels for different catches were estimated.

Hormonal milieu drives economic demand for cocaine in female rats.

There are substantial sex differences in drug abuse, and a key feature of cocaine addiction is pathologically high motivation for drug. We investigated the role of ovarian hormones on cocaine demand in female rats using a within-session threshold behavioral economics (BE) procedure, which allows us to compare motivation for drug across hormonal states and sex while controlling for differences in dose and intake. This approach quantifies demand elasticity (α) and free consumption (Q0, consumption at null effort) to determine motivation for cocaine. Overall, female rats showed greater motivation for cocaine compared to males. However, this difference was cycle phase-dependent - motivation for cocaine when females were in proestrus was lower compared to the same animals across cycle phases, and overall similar to that of males. Hormonal cycle phase accounted for 70% of the within-subject variance in demand elasticity, obscuring other individual differences in female demand. High serum progesterone (P4; e.g., in proestrus) predicted decreased cocaine motivation (high demand elasticity), whereas serum estradiol (E2) correlated to greater intake at null effort (Q0). However, individual differences were revealed across OVX females, who displayed a range of demand elasticity, as seen in males. E2 replacement in OVX females increased motivation for cocaine, whereas P4 replacement decreased motivation. We also found that as few as 4 weeks of cocaine self-administration accelerated estropause in female rats as young as 12 weeks old. By 13 weeks of self-administration, proestrus epochs were no longer observed, and cocaine demand was potentiated by persistent estrus in all females. Thus, P4 signaling is a key modulator of cocaine demand in females that may underlie previously observed sex differences in addiction phenotypes.

3D reactive printing of polyaniline hybrid hydrogel microlattices with large stretchability and high fatigue resistance for wearable pressure sensors

Conducting polymer hydrogels face difficulties in the combination of high elasticity, large sensitivity and wide response range for flexible pressure sensing. Herein, an intrinsically stretchable polyaniline hybrid hydrogel (PHH) is prepared through a reactive shaping method including two steps. First, a high-viscosity precursor solution containing poly(acrylic acid) (PAA), poly(ethylene oxide) (PEO) and aniline monomers is submerged into an acid solution containing initiators for the polymerization of aniline, and gelation is quickly formed due to the formation of dense hydrogen bonds between the PAA and PEO chains. Second, the initiators in the acid solution facilitate subsequent in-situ polymerization of aniline confined in the PAA/PEO framework into a 3D polyaniline (PANI) network. Benefiting from the formation of reversible hydrogen bonds and electrostatic interactions between the PAA/PEO and PANI networks, the resultant PHH exhibits large stretchability and high fatigue resistance. The reactive shaping method facilitates a 3D reactive printing of PHH into pre-designed microlattice structures with high elasticity and electron/ion dual-conducting pathways, which is promising as a stretchable conductor for capacitive pressure sensors. The sensors therefore display high sensitivity (7.10 kPa−1) in a wide detecting range and are capable of detecting complex human motions for wearable sensing applications.

Full-Scale Model Experimental Study of the HDPE Multitube Saddle of an Extradosed Bridge

For an extradosed bridge, the main function of the saddle structure is to steer the cable in the pylon. The saddle is one of the most important and key structures in the cable prestressing system. Focusing on the high-density polyethylene (HDPE) multitube saddle structure and cement slurry filling, the mechanical properties of the saddle are analyzed and verified in detail by a full-scale model test. It is shown that the numerical analysis results are consistent with the test results. Under 1.8 times the designed load (7171.4 kN), the test strain values of each section are less than the calculated strain values, which indicates that the saddle structure design is safe and that the saddle structure meets the design requirements. Friction resistance between the steel strands and the HDPE tube can resist unbalanced cable forces on either side of the saddle during construction and operation. According to the test, the maximum value of the static friction coefficient between cable and HPDE tube is 0.093. The cement slurry stress is basically in the linear elasticity range under the test conditions. After further increasing the cable tension, the cement slurry inside the saddle is compacted, without any cracks or crushing phenomena. This demonstrates that the saddle is safe and reliable.

The role of shear wave elastography in the assessment of placentas in healthy pregnancy women during third-trimester: A preliminary study

ObjectiveThe study aimed to analysis the elasticity value of placenta in healthy women during third trimester by shear wave elastography (SWE), and tried to investigate the relationship between clinical characteristics and placental elasticity. MethodsSingleton healthy pregnant women who had routine ultrasound examination between 28 and 37 weeks were enrolled. SWE of the frontier placentas were evaluated by transabdominal ultrasound elastography. Only placentas at front wall were enrolled. The placenta was divided into three areas for SWE examination: the central area (Area A), the periphery area (Area B) and the area between central and edge of placenta (Area C). Then, the subjects with normal delivery were evaluated and analyze the relationship between clinical features and placental elasticity. ResultsA total of 43 pregnant women were included in this study. The mean value of SWE in the central area was 5.67±2.51 kPa. And it was 6.50±2.57 kPa in the periphery area, 5.17±2.25 kPa in the area C. There were no significant differences except area B and C. In different age group, there were no significant differences except area C. The history of childbearing and uterine operation and the gestational age were no significant correlation with the SWE value of placenta. There were also no significant differences between birth weight percentile and placental elasticity. ConclusionThe placental elasticity is stable in healthy women during third trimester. Shear wave elastography is helpful to assess the placental elasticity and can be used as a supplemental technique to existing methods for monitoring the placental function. But the normal elasticity range in some certain areas of placenta should be confirmed by further study.

Endogenous longevity and optimal tax progressivity

We study the impact of endogenous longevity on optimal tax progressivity and inequality in an overlapping generations model with skill heterogeneity. Higher tax progressivity decreases both the longevity gap and net income inequality, but at the expense of lower average lifetime and income. We find that the welfare-maximizing income tax is less progressive in our model with endogenous longevity than in our model with exogenous longevity. In a highly stylized calibration of the US economy, we show that optimal tax progressivity is less than what prevails under the current US tax system. Our results are robust to the range of empirical labor supply elasticity and the assumptions of missing annuity markets and stochastic health. Our conclusion for the optimal progressivity of the US tax system can be altered by the adoption of a more egalitarian welfare function or by increases in prevailing levels of wage inequality.

Heterogeneity in Price Elasticity of Medicine Demand in China: Moderate Effect From Economic Incentive and Quality Difference.

Objectives: Previous studies have shown a wide range of drug price elasticity, but the price response to demand among various therapeutic drug categories and drug types (generic/originator) is still unexplored in China. This study estimates the price elasticity of medicine demand with regard to quality differences, unfair competition, and a regulated market.Methods: Product-level data on anti-tumor, cardiovascular disease (CVD), and antimicrobial drugs were collected from the Tianjin Urban Employees’ Basic Medical Insurance database (2008–2010). The moderating effects of quality, profit incentive, and illegal rebates are considered in a dynamic panel model.Findings: Our results suggest that the price elasticity of drug demand varies across drug categories, with least elasticity for anti-tumor drugs and most elasticity for CVD drugs (−0.192 for anti-tumor drugs vs. −0.695 for antimicrobials vs. −1.100 for CVD drugs, p < 0.01). Moreover, the absolute value of price elasticity of generic drugs is higher than that of originator drugs in anti-tumor and CVD therapeutic classes (interact: 0.716 for anti-tumor; -0.630 for CVD, p < 0.001). We believe that quality difference plays a dominant role in the interaction between quality and illegal rebates for these two kinds of generic drugs. In the antimicrobial sub-group, the absolute value of price elasticity of generic medicine is lower than that of originator drugs. We believe that, owing to the high level of unfair competition among enterprises, the role of illegal kickbacks is dominant, which reduces the price elasticity of demand for generic antimicrobial drugs.Conclusion: Our study provides an overview of the result of interaction between quality and illegal rebates in different medicine markets in China and shows that disease type is a primary factor that impacts price elasticity.

In Vivo Characterization and Application of the PHA Synthase from Azotobacter vinelandii for the Biosynthesis of Polyhydroxyalkanoate Containing 4-Hydroxybutyrate.

Polyhydroxyalkanoate (PHA) is a biodegradable thermoplastic naturally synthesized by many microorganisms, and the PHA synthase (PhaC) is known to be the key enzyme involved in determining the material properties and monomer composition of the produced PHA. The ability to exploit widely distributed, commonly found soil microorganisms such as Azotobacter vinelandii to synthesize PHA containing the lipase-degradable 4-hydroxybutyrate (4HB) monomer will allow for convenient production of biocompatible and flexible PHA. Comparisons between the A. vinelandii wild type and mutant strains, with and without a surface layer (S-layer), respectively, in terms of gene or amino acid sequences, synthase activity, granule morphology, and PHA productivity, revealed that the S-layer is the sole factor affecting PHA biosynthesis by A. vinelandii. Based on PHA biosynthesis using different carbon sources, the PhaC of A. vinelandii showed specificity for short-chain-length PHA monomers, making it a member of the Class I PHA synthases. In addition, it was proven that the PhaC of A. vinelandii has the inherent ability to polymerize 4-hydroxybutyrate (4HB) and the mediated accumulation of PHA with 4HB fractions ranging from 10 mol% to as high as 22 mol%. The synthesis of biocompatible PHA containing tailorable amounts of 4HB with an expanded range of elasticity and lipase-degradability will enable a wider range of applications in the biomedical field.

Dimensional analysis of spring-wing systems reveals performance metrics for resonant flapping-wing flight.

Flapping-wing insects, birds and robots are thought to offset the high power cost of oscillatory wing motion by using elastic elements for energy storage and return. Insects possess highly resilient elastic regions in their flight anatomy that may enable high dynamic efficiency. However, recent experiments highlight losses due to damping in the insect thorax that could reduce the benefit of those elastic elements. We performed experiments on, and simulations of, a dynamically scaled robophysical flapping model with an elastic element and biologically relevant structural damping to elucidate the roles of body mechanics, aerodynamics and actuation in spring-wing energetics. We measured oscillatory flapping-wing dynamics and energetics subject to a range of actuation parameters, system inertia and spring elasticity. To generalize these results, we derive the non-dimensional spring-wing equation of motion and present variables that describe the resonance properties of flapping systems: N, a measure of the relative influence of inertia and aerodynamics, and , the reduced stiffness. We show that internal damping scales with N, revealing that dynamic efficiency monotonically decreases with increasing N. Based on these results, we introduce a general framework for understanding the roles of internal damping, aerodynamic and inertial forces, and elastic structures within all spring-wing systems.

Structural analysis of a modulated load-bearing structure designed to investigate the interaction between soil and the working parts of agricultural machines

The article presents how to approach the structural analysis of a modulated load-bearing structure (MLBS) for researching the interaction between the soil and the working parts of agricultural machines. The special approach, in relation to the usual structures, is due to the fact that the supporting structure is a modulated, multifunctional one and, consequently, all the usual modular types of operation must be tested. The structure is analyzed in the hypothesis of the loads that maintain the demands of the materials used in the characteristic range of the linear elasticity, because the structure is expected to work in such conditions. The analyzed modulated structure is obtained by modular design for use in research, in several working variants. The authors also present the difficulties related to the transformations of CAD / CAM models into CAD / CAE models and opinions on the necessity of mixed analysis teams in addressing such problems.

High-Temperature Annealed Biochar as a Conductive Filler for the Production of Piezoresistive Materials for Energy Conversion Application

In this research work, we develop a prototype that is able to convert mechanical strain into an electrical signal. To reach this scope, we evaluated the electrical properties of a thermally annealed biochar-based silicon composite. The great elasticity range of silicon will provide the mechanical properties for the realization of an effective piezoresistive material. For the fulfillment of this aim, we annealed olive biochar at 1500 °C in order to achieve a good degree of graphitization and an electrical conductivity close to 103 S/m. The electrical conductivity under the mechanical stress of composites was deeply investigated through experiments and simulation to achieve a comprehensive knowledge. Furthermore, a real device based on these composites was designed and realized to demonstrate one of the prospective exploitations of the composite piezoresistive properties.

Influence of Ausforming Treatment on Super Elasticity of Cu-Zn-Al Shape Memory Alloy for Seismic Energy Dissipaters

In order to develop the application of the more cost-effective copper-based shape memory alloys (SMAs), rather than nickel–titanium as earthquake energy dissipaters, the influence of ausforming-induced plastic deformation on phase transformations, microstructure, super elasticity and mechanical properties of the shape memory alloy Cu-26Zn-4Al was examined. These specific SMA properties were targeted by applying appropriate parameters of the thermomechanical (the so-called ausforming) process: beta-phase homogenization at 800 °C for 20 min, one-step hot rolling at 800 °C and water quenching. The results showed significant microstructural changes, increased mechanical resistance and change in the phase transformation behavior. The SMA treated by ausforming retained the reversible austenitic–martensitic transformation ability, with the appearance of the super-elastic effect up to 6% of strain recovery. Although some strengthening occurred after hot rolling (an increase in true yield strength of 125 MPa was detected), all phase transformation temperatures were decreased. The smallest decrease was detected for the austenite finish temperature (32.8 °C) and the largest for the martensite finish temperature (42.0 °C), allowing both the expansion and the lowering of the temperature range of super elasticity, which is favorable for construction applications. It is concluded that it is possible to achieve an optimal combination of adequate strength and improved transformation behavior of Cu-Zn-Al alloy by applying the ausforming treatment.

Assessing the 2010–2018 financial crisis in Greece, Portugal, Ireland, Spain, and Cyprus

PurposeThe article develops a model to interpret the 2010–2018 financial crisis in Greece, Portugal, Ireland, Spain and Cyprus, and the loan programs from the IL (International Lender; i.e. the European Union, the European Commission, and the International Monetary Fund).Design/methodology/approachFor each country, an isoelastic utility with constant relative risk aversion is assumed. For the IL a Cobb Douglas utility is assumed with consumption, the GDP (Gross Domestic Product) to debt ratio, and market stability as inputs, accounting for time discounting. This article applies two methods to assess the empirics. The first method considers the IL's strategy as a whole over the 2010–2018 period. The second method assumes that the IL maximizes its utility in one period to determine its optimal loan, accounting for the empirics in that period, and the debt in the previous period.FindingsFor the first method, when the output elasticity in the IL's Cobb Douglas utility is high favoring consumption, the IL prefers offering a higher loan than its actual loan. Otherwise the IL prefers to offer no loan. The output elasticity at which the IL prefers to offer a loan is lowest for Greece, second lowest for Cyprus, third lowest for Portugal, and highest for Ireland and Spain. A high loan to Greece over a larger range of the output elasticity for Greece's consumption is supported by Greece being prioritized through the loan program. For the second method, the IL prefers to offer no loan to Greece which is too burdened with debt. Thus, the first method seems preferable, considering the entire duration of the crisis holistically.Originality/valueThe article offers a novel perspective of how to assess debt crises, enabling the IL to weigh various factors such as consumption, GDP, loan offered, and each country's debt to credit markets.

Elasticity of Substitution, Price Effect and Sustainable Fertilizer Use: A Translog and SUR Analysis in China

Fertilizer has brought great pressure to sustainable ecological environment. Research on the effect of price on fertilizer use as well as the substitution relationship of fertilizer and other input factors of agricultural production is of great importance for green, efficient, and intensive agricultural production in the world. This study first constructs translog cost functions and models of elasticity, then uses the factor input and price data from 2004 to 2016 to measure the price elasticity of fertilizer demand, and the elasticity of factor substitution in China's maize and cabbage production. The results suggest that: the price elasticity of fertilizer demand is in a low elasticity range; there is a compensation relationship between fertilizer and labour and a substitution relationship between fertilizer and machinery in China's maize production, while these relationships in China's cabbage production are opposite.

Substrate Elasticity Exerts Functional Effects on Primary Microglia.

Microglia—the brain’s primary immune cells—exert a tightly regulated cascade of pro- and anti-inflammatory effects upon brain pathology, either promoting regeneration or neurodegeneration. Therefore, harnessing microglia emerges as a potential therapeutic concept in neurological research. Recent studies suggest that—besides being affected by chemokines and cytokines—various cell entities in the brain relevantly respond to the mechanical properties of their microenvironment. For example, we lately reported considerable effects of elasticity on neural stem cells, regarding quiescence and differentiation potential. However, the effects of elasticity on microglia remain to be explored.Under the hypothesis that the elasticity of the microenvironment affects key characteristics and functions of microglia, we established an in vitro model of primary rat microglia grown in a polydimethylsiloxane (PDMS) elastomer-based cell culture system. This way, we simulated the brain’s physiological elasticity range and compared it to supraphysiological stiffer PDMS controls. We assessed functional parameters of microglia under “resting” conditions, as well as when polarized towards a pro-inflammatory phenotype (M1) by lipopolysaccharide (LPS), or an anti-inflammatory phenotype (M2) by interleukin-4 (IL-4). Microglia viability was unimpaired on soft substrates, but we found various significant effects with a more than two-fold increase in microglia proliferation on soft substrate elasticities mimicking the brain (relative to PDMS controls). Furthermore, soft substrates promoted the expression of the activation marker vimentin in microglia. Moreover, the M2-marker CD206 was upregulated in parallel to an increase in the secretion of Insulin-Like Growth Factor-1 (IGF-1). The upregulation of CD206 was abolished by blockage of stretch-dependent chloride channels. Our data suggest that the cultivation of microglia on substrates of brain-like elasticity promotes a basic anti-inflammatory activation state via stretch-dependent chloride channels. The results highlight the significance of the omnipresent but mostly overlooked mechanobiological effects exerted on microglia and contribute to a better understanding of the complex spatial and temporal interactions between microglia, neural stem cells, and glia, in health and disease.

The advantages of using polymer-bituminous concentrate for the production of polymer-bituminous binders

Construction of road surfaces with an extended service life, as well as the transition to methods of volumetric and functional design of asphalt concrete mixtures, leads to the need for the use of polymer-bituminous binders, as bitumen without polymer modifiers does not provide the required physical and mechanical characteristics and durability. Traditional PBB production technologies involve the use of complex technological processes and equipment. In addition, existing technological features lead to a significant decrease in the quality of the resulting polymer-bituminous binder. In this paper, we consider the possibility of obtaining PBB with high physical and mechanical parameters by using the PBC modifier (polymer-bituminous concentrate). The modifier under study is a polymer dispersed in an oil base and stabilized with active components. When added to bitumen, a colloid mill and complex processes of preparation and maturation of the binder are not required. Experiments have shown that the resulting binder has the characteristics of PBB, in particular, an extended temperature range of plasticity, elasticity and resistance to cyclic loads. At the same time, gentle heating modes provide increased resistance to aging during the preparation of asphalt concrete mixture and its operation. The ease of use of this modifier makes it possible to obtain PBB with a wide range of characteristics that correspond to the operating conditions.

Cancer cells optimize elasticity for efficient migration.

Cancer progression is associated with alternations in the cytoskeletal architecture of cells and, consequently, their mechanical properties such as stiffness. Changing the mechanics of cells enables cancer cells to migrate and invade to distant organ sites. This process, metastasis, is the main reason for cancer-related mortality. Cell migration is an essential step towards increasing the invasive potential of cells. Although many studies have shown that the migratory speed and the invasion of cells can be inversely correlated to the stiffness of cells, some other investigations indicate opposing results. In the current work, based on the strain energy stored in cells due to the contractile forces, we defined an energy-dependent term, migratory index, to approximate how changes in the mechanical properties of cells influence cell migration required for cancer progression. Cell migration involves both cell deformation and force transmission within cells. The effects of these two parameters can be represented equally by the migratory index. Our mechanical modelling and computational study show that cells depending on their shape, size and other physical parameters have a maximum migratory index taking place at a specific range of cell bulk elasticity, indicating the most favourable conditions for invasive mobility. This approximate model could be used to explain why the stiffness of cells varies during cancer progression. We believe that the stiffness of cancer or malignant cells depending on the stiffness of their normal or non-malignant counterparts is either decreased or increased to reach the critical condition in which the mobility potential of cells is approximated to be maximum.

THE IMPACT OF TECHNOLOGIES OF THE INDUSTRY 4.0 ON INCREASE OF PRODUCTIVITY AND TRANSFORMATION OF INNOVATIVE BEHAVIOR OF THE INDUSTRIAL COMPANIES

Paper is devoted to interrelation research between investments in technology of the fourth industrial revolution, patterns of innovative behavior and productivity of the Russian industrial companies. Research is conducted on the basis of data of 576 industrial companies (874 respondents).At the first investigation phase it is confirmed that technologies of the industry have the greatest impact on increase of productivity and transformation of industrial production 4.0: robotics, Internet of things, additive production, big data and analytics, cybersecurity. Besides, effects of introduction of technologies of the fourth industrial revolution are defined: financial, valuable, operational, innovative and technological development.At the second investigation phase the interrelation analysis between investments is carried out to technologies of the industry 4.0, patterns of innovative behavior and productivity of the industrial companies with use of the modified CDM model. The received empirical results have shown that investments of the industrial companies in technology of the fourth industrial revolution increase productivity with elasticity 0,28 for high-tech industries; 0,21 – for the middle-technology, and 0,14 – for low-technology.Investments in innovative activity have elasticity range from 0,04 (for low volumes of investments in new technologies) to 0,17 (at the high volumes of investments); the relations between investments in an innovation and growth of productivity aren't linear and have stable positive relation only after a certain critical mass of investments in new technologies is reached. Considerable influence on interrelation of investments in innovations and productivity is rendered by the characteristic of branch in which the company works: the firms working in high-tech industries, not only put in new technologies, innovative activity more, but also have more high efficiency caused by scientific researches and development; the companies of low-technology branches have negative elasticity of investments in innovations and productivity that is connected with influence of effect of unprofitability of investments into innovations (appropriability effect), that is the additional profit on investment isn't essential.

Mechanical Properties of Corner Joints Made of Honeycomb Panels with Double Arrow-Shaped Auxetic Cores

The development of both light and strong wood-derived materials is an interesting research area, particularly in terms of usability in, e.g., furniture constructions. Honeycomb panels being current industry standard are relatively thick (32 mm and 40 mm), thus their attractiveness in designing furniture is limited. In a few studies, it has been shown that honeycomb panels with paper cores are characterized by unsatisfactory mechanical properties, especially when the composite thickness is less than 20 mm. From the literature, it is also evident that mechanical properties might be improved by introducing auxetic features into the core structure. Even though it is a concept with great potential, there are a few studies dealing with honeycomb panels with auxetic cores made of paper. Furthermore, there is no research on the corner joints made from such material. For this reason, the aim of the study was to test the bending behavior of the corner adhesive joints made of honeycomb panels with double arrow-shaped auxetic cores. Within the research, the core cell was adopted based on literature and preliminary studies, paper auxetic cores were produced by the use of the designed and 3d printed device, and joints stiffness and strength were calculated analytically based on the experiment results. Evaluated corner joints stiffness, both in compression and tension test, is greater for samples made of panels with designed auxetic cores. Surprisingly, in the analyzed range of elasticity, it was statistically proved that the values of joint stiffness coefficient K did not vary significantly between compared joints pairs.

Effects of elasticity and flow ramp up on kinetics of shear banding flow formation in wormlike micellar fluids

We report experiments on spatiotemporal evolution of the velocity profiles in shear-banding wormlike micelles upon inception of the flow in a Taylor–Couette (TC) cell. Both moderately entangled and highly entangled solutions are considered over a broad range of fluid elasticity E. Fluid elasticity, E = Wi/Re, characterizes the relative importance of the elastic to inertial effects. For both moderately and highly entangled solutions, upon inception of the shear, and during the stress decay period, fluid moves in the opposite direction to that of the imposed motion in a subset of the gap beyond critical thresholds of elasticity and flow ramp up rate, which depend on the fluid entanglement density. Surprisingly, beyond a second critical threshold of the fluid elasticity, the transient backflow disappears in moderately entangled solutions, highlighting the importance of the micellar entanglement on transient evolution of the flow in shear banding systems. More interestingly, we report the formation of multibanded quasisteady velocity profiles under certain conditions of fluid elasticity and flow ramp up rate. The multibanded profiles are characterized by a low shear band near the inner cylinder, a high shear band in the middle of the TC gap, and another low shear band near the outer cylinder. Finally, we show that the apparent wall slip at the inner cylinder of the TC cell is more pronounced for highly entangled solutions and decreases as the fluid elasticity increases. Experimental observations are compared with the existing simulations of the Vasquez–Cook–McKinley model, and several suggestions are made for future simulations.