Wireless Links Research Articles

Energy efficiency and interoperability through O-RAN Rapid Transition Protocol (ORTP)

Mobile network traffic is increasing accompanied by increased energy consumption. Traditional Radio Access Networks (RANs) have been used for decades as the foundation of mobile communications, providing mobile customers with reliable voice and data services. However, they encounter obstacles in terms of scalability, adaptability, and cost-effectiveness. Next-generation wireless networks need efficient Radio Access Network (RAN) solutions to achieve low latency and high throughput. The Open RAN (O-RAN) architecture is a potential solution for 5G and beyond networks due to its open interfaces, disaggregated network entities and services, network hardware and software virtualization, and intelligent control. Traditionally standard RAN accounts for the bulk of mobile network energy consumption, leading towards higher Operational expenditure (OPEX) costs. In the context of cellular networks. Handover strategies need careful development to cater for efficient resource usage as well as overall system energy efficiency. O-RAN Rapid Transition Protocol (ORTP) presented in this paper employs minimum value of handover margin (HOM) and is aimed at increased energy efficiency. 5G based System level simulations have been performed to investigate the efficacy of ORTP for key performance indicators including handover probability, Radio Link Failure, connection density, ping pong effect and dynamic power consumption. It is found that the usage of lower HOM values provide noticeable achievement in terms of power consumption, thereby rendering ORTP around 20 % more efficient compared to 5G networks, while keeping it interoperable.

An Effective Scheme for Modeling and Compensating Differential Age Errors in Real-Time Kinematic Positioning

In many real-time kinematic (RTK) positioning applications, reference observations are transmitted over wireless links that can experience frequent interruptions or substantial delays. This results in large differential ages between base and rover observations, which, in turn, leads to a deterioration in positioning performance. To bridge the significant age difference, in this work, we propose a simple and effective scheme for modeling and compensating for such errors. Firstly, the overall differential age error was modeled using truncated Taylor expansion. Then, a time-differenced carrier phase (TDCP)-based observation model was established to estimate the errors with the Kalman framework. Since estimating the receiver’s clock error is unnecessary, equivalent transformation and sequential filtering technology were adopted to significantly reduce the computational complexity. Furthermore, a predictor performance monitor was introduced to mitigate the integrity risks that may occur due to model mismatches. The effectiveness of this scheme was validated by static and dynamic field experiments. The static experiment results showed that when the differential age was 60 s, the GPS and BDS satellites’ overall root mean square error (RMSE) with the asynchronous RTK (ARTK) prediction method was 2.8 and 5.5 times that of the proposed method, respectively. Moreover, when the differential age was 120 s, these values were 3.3 and 5.4 times that of the proposed method, respectively. The field experiment results showed that when the differential age was 60 s, the integer ambiguity fixed rate and false fixed rate of the ARTK method were 0.90 and 1.63 times that of the proposed method, respectively. Finally, at a 120 s differential age, these values were 0.78 and 4.78 times that of the proposed, respectively.

Design and Evaluation of a Hybrid 2D-SWZCC OCMDA System with Multicarrier MM-Wave

This paper presents a hybrid communication system combining optical code division multiple access (OCDMA) and multicarrier millimeter-wave (MM-Wave) architecture operating at 35, 55, 75, and 95 GHz connected to a home network center (HNC) and the end user (EU). Hybrid Link reduces congestion on complex RF networks by combining optical fiber backhaul with radio links. The OptiSystem simulation demonstrates successful data transmission and transmission capacity at 40Gbps over various distances. Furthermore, this new 40G-MM wave OCDMA system that takes advantage of a two-dimensional single-weighted zero cross-correlation (2D-SWZCC) system with a multiplexing scheme of polarization wavelength multiplies the same N channels to M OCDMA code of the MM-Wave system that dramatically increased scalability. The comparative analysis shows that the proposed 2D-SWZCC hybrid algorithm outperforms 1D-SWZCC regarding scalability. This study contributes to developing communication algorithms with high data rates and provides promising solutions for method limitations and scalability in hybrid-MM-Wave-OCDMA architectures.

Terminal-Matched Topological Photonic Substrate-Integrated Waveguides and Antennas for Microwave Systems.

In engineered photonic lattices, topological photonic (TP) modes present a promising avenue for designing waveguides with suppressed backscattering. However, the integration of the TP modes in electromagnetic systems has faced longstanding challenges. The primary obstacle is the insufficient development of high-efficiency coupling technologies between the TP modes and the conventional transmission modes. This dilemma leads to significant scattering at waveguide terminals when attempting to connect the TP waveguides with other waveguides. In this study, a topological photonic substrate-integrated waveguide (TPSIW) is proposed that can seamlessly integrate into traditional microstrip line systems. It successfully addresses the matching problem and demonstrates efficient coupling of both even and odd TP modes with the quasi-transverse electromagnetic modes of microstrip lines, resulting in minimal energy losses. In addition, topological leaky states are introduced through designed slots on the TPSIW top surface. These slots enable the creation of TP leaky-wave antennas with beam steering capabilities. A wireless link based on TPSIWs are further established that enables the transmission of distinct signals toward different directions. This work is an important step toward the integration of TP modes in microwave systems, unlocking the possibilities for the development of high-performance wireless devices.

Research on AdHoc network routing algorithm for link stability prediction

Abstract This study aims to improve network communication efficiency and reliability by researching routing algorithms for predicting link stability in AdHo networks. AdHoc network is a self-organizing, decentralized network structure in which nodes establish temporary connections through wireless communication, making the network resilient and flexible. However, due to the continuous changes in network topology and the instability of wireless links, routing problems in AdHoc networks have become particularly complex. This article proposes a backup path routing algorithm LS-BPR based on link stability prediction. This mechanism takes the path with the minimum delay as the main path, uses the cost function as the standard for selecting backup paths, and then uses the ARIMA model to predict links with good link stability as backup paths. We simulate and compare LS-BPRAODV and AODV protocols using the QualNet simulation platform. The simulation results show that the LS-BPRAODV, with the addition of a prediction mechanism, improves network performance, reduces the number of source node routing discoveries, reduces the number of route breaks, significantly reduces the packet loss rate and information reception delay in the network, and improves the average throughput of the network. This study provides new theoretical and empirical support for the routing algorithm for link stability prediction in AdHo networks, which is of great significance for promoting the development of wireless self-organizing networks.

Framework for Designing of Wireless Sensor Network Using OPNET and Effect of Transport Protocols on Simulation

A Wireless sensor network can be defined as a network of devices that can communicate the information gathered from a monitored field through wireless links. The data is forwarded through multiple nodes, and with a gateway, the data is connected to other networks like wireless Ethernet. It is intended for a general application and should be able to collect data from many nodes, every node connected to several sensors. One possible application for such a network is in the medical area. At first the network will be used to display the evolution of blood pressure; the body temperature, the ambient temperature and pressure and the level of the transfusion liquid can be collected as well. The network coordinator will transmit the data to a local server for further processing. The simulation will be used to evaluate the general parameters of the wireless network and to optimize it. In this paper, we aim to evaluate the performance of a ZigBee wireless sensor network using OPNET and also study the effects of TCP and UDP on the performance of the application based on OPNET simulation software. Keywords-Sensor, wireless sensor network, ZigBee, OPNET, TCP, UDP.

Algorithm for measuring parameters of radio link of an unmanned aircraft in fpv mode of the centimeter frequency range

The mass use of unmanned aerial vehicles (UAVs) in the mode of remote control "from the first person" (First Person View, FPV) in combat operations radically changes the picture of modern war. Their use makes it possible to damage or destroy enemy equipment, the cost of which is hundreds of times higher than the cost of UAVs. To successfully perform the UAV flight mission in FPV mode, it is necessary to ensure stable radio communication of the UAV with the ground control station (GSC). In the work to organize a radio line between the GSC and the UAV, it is proposed to use radio lines of the centimeter frequency range. At the same time, at the stage of flight mission planning, the UAV operator needs to have information about the parameters of the receiving and transmitting devices of the unmanned aerial vehicle complex (UAVС) in order to calculate the maximum flight range. The purpose of the work is to develop an algorithm for measuring parameters of the radio link of an unmanned aerial vehicle in the FPV mode of the centimeter frequency range. The use of this information will allow the UAVC operator to create a flight map and prepare for a combat mission. The material presented in the article contains practical value for UAV operators and can be used in the organization and planning of the flight mission of multi-rotor UAVs of the tactical level at a given distance. Also, the material can be used by UAV service units for the purpose of checking the technical parameters of the radio link between the UAV and GSC and the optical systems installed on board the UAV (video cameras, thermal imaging cameras, etc.).

5G wavelength-division-multiplexing-based bidirectional optical wireless communication system with signal remodulation employing cascaded reflective semiconductor optical amplifiers

Compared with previous generations, fifth-generation communications can provide faster download and upload speeds and support a greater number of connected devices. Integrating fifth-generation signals with optical wireless communication systems provides promising ways to afford higher transmission rates and faster wireless connectivity. Here we report a fifth-generation wavelength-division-multiplexing-based bidirectional optical wireless communication system with signal remodulation employing cascaded reflective semiconductor optical amplifiers to effectively remove the downstream data for uplink transmission. It shows a fifth-generation wavelength-division-multiplexing-based bidirectional optical wireless communication system using four wavelengths for communication. The uplink performance is substantially enhanced by using two reflective semiconductor optical amplifiers to remove the downstream data. The system achieves an aggregate transmission rate of 36.4 Gbit/s for both downlink and uplink transmissions over a 100-m optical wireless link. This demonstrated fifth-generation wavelength-division-multiplexing-based bidirectional optical wireless communication system employing cascaded reflective semiconductor optical amplifiers holds great potential for enhancing fifth-generation advanced communication capabilities.

X-band scintillations in Venus radio occultations observed by Akatsuki

Power fluctuations are observed on radio signals propagating through the Venus atmosphere. These scintillations, due to fluctuations in refractive index, are particularly strong between 56 and 72 km altitude where the strong convective stability favors gravity wave propagation. We examine low-latitude X-band radio occultation experiments performed by the Akatsuki spacecraft to assess the statistical variability of these scintillations. The observed root-mean-square scintillation amplitudes at a given altitude vary by a factor of about 3. Part of this range is due to the different geometry of the occultations: the corresponding variations in refractive structure constant at 60-70 km altitude span a factor of ∼2. These propagation characteristics may influence the optimization of the two-way radio link for the DAVINCI mission currently in development.

An energy-aware cluster-based routing in the Internet of things using particle swarm optimization algorithm and fuzzy clustering

The effectiveness and longevity of IoT infrastructures heavily depend on the limitations posed by communication, multi-hop data transfers, and the inherent difficulties of wireless links. In dealing with these challenges, routing, and data transmission procedures are critical. Among the fundamental concerns are the attainment of energy efficiency and an ideal distribution of loads among sensing devices, given the restricted energy resources at the disposal of IoT devices. To meet these challenges, the present research suggests a novel hybrid energy-aware IoT routing approach that mixes the Particle Swarm Optimization (PSO) algorithm and fuzzy clustering. The approach begins with a fuzzy clustering algorithm to initially group sensor nodes by their geographical location and assign them to clusters determined by a certain probability. The proposed method includes a fitness function considering energy consumption and distance factors. This feature guides the optimization process and aims to balance energy efficiency and data transmission distance. The hierarchical topology uses the advanced PSO algorithm to identify the cluster head nodes. The MATLAB simulator shows that our method outperforms previous approaches. Various metrics have demonstrated significant improvements over DEEC and LEACH. The method reduces energy consumption by 52% and 16%, improves throughput by 112% and 10%, increases packet delivery rates by 83% and 15%, and extends the network lifespan by 48% and 27%, respectively, compared to DEEC and LEACH approaches.

Performance Analysis of Weighting Methods for Handover Decision in HetNets

The increasing demand for data, driven by advancements in technology, requires expanding coverage and enhancing network capacity. This expansion presents certain challenges, such as unnecessary Handover (HO) and interference, which can lead to a degradation in Quality of Service (QoS). To provide better QoS, it is vital to precisely model the HO decision-making process with optimal cell selection ensuring service continuity with minimal disruption. This paper investigates the performance of Analytic Hierarchy Process (AHP), Entropy, Standard Deviation (STD), and Weighted Sum Model (WSM) comparatively, while considering attributes such as Reference Signal Received Power (RSRP), Signal-to-Interference-Plus-Noise Ratio (SINR), channel capacity, and cell capacity. Additionally, the Technique for Order Performance by Similarity to Ideal Solution (TOPSIS) is utilized to rank candidate cells for HO decisions. The performance of the considered weighting methods has been analyzed in a dense Small Cell (SC) Long-Term Evolution-Advanced (LTE-A) Heterogeneous Network (HetNet) environment based on system Key Performance Indicators (KPIs) such as HO Rate (HOR), HO Failure (HOF), Radio Link Failure (RLF), and HO Ping-Pong (HOPP). The evaluations have shown a trade-off between the methods in different KPIs. The findings highlight the importance of the weighting methods on HO decision, considering the significance of the specific KPIs.

A Deep Learning-Based Reliable Link Prediction Model for Achieving Traffic-Aware Routing in Mobile Ad-hoc Networks

One of the most promising wireless network architectures is the mobile ad-hoc network (MANET). Researchers have introduced enormous protocols for efficient routing, but it does not provide a reliable communication link for data transmission. Therefore, this research proposes a reliable link prediction-based traffic-aware deep learning routing protocol in MANET to maintain path stability and reliability to construct efficient routing. The reliable traffic-aware link prediction model used in this research is Fuzzy-based Deep Extreme [Formula: see text]-Learning (FDEQL) model. The fuzzy logic rule is used to compute the status of a wireless link to build stable and faster paths toward destinations. Traffic patterns can affect the efficiency of a node. So, to cope with the traffic pattern in MANET, the point-to-point (P2P) and end-to-end (E2E) traffic matrices are initially constructed. To evaluate whether the wireless link is reliable or not, the proposed approach utilizes fuzzy rules by considering essential parameters such as neighborhood overlap (NOVER), bipartivity index (BI), node mobility (NM), data rate (DR), received signal strength indicator (RSSI) and buffer occupancy (BO). The output is the [Formula: see text]-value for reliable link prediction. The performance of a proposed model is validated with other baseline methods based on various measures such as energy consumption, route failure, throughput, delay, packet delivery ratio (PDR), normalized routing load (NRL) and buffer occupancy by varying the mobility speed from 5 to 30[Formula: see text]m/sec, number of nodes and simulation time, respectively. At the mobility speed of 10[Formula: see text]m/sec, the proposed model has a delay of 0.08 sec, PDR of 99% and throughput of 1903.4[Formula: see text]kbps. The proposed model achieves a delay of 19.37[Formula: see text]msec, PDR of 96.22%, and throughput of 132.95[Formula: see text]kbps, respectively, for 30 nodes. If the simulation runs for 300 sec, the suggested model achieves a delay of 2.98 sec and a PDR of 0.946, respectively.

Demand side management with wireless channel impact in IoT-enabled smart grid system

Demand Side Management (DSM) is a vital issue in smart grids, given the time-varying user demand for electricity and power generation cost over a day. On the other hand, wireless communications with ubiquitous connectivity and low latency have emerged as a suitable option for smart grid. The design of any DSM system using a wireless network must consider the wireless link impairments, which is missing in existing literature. In this paper, we propose a DSM system using a Real-Time Pricing (RTP) mechanism and a wireless Neighborhood Area Network (NAN) with data transfer uncertainty. A Zigbee-based Internet of Things (IoT) model is considered for the communication infrastructure of the NAN. A sample NAN employing XBee and Raspberry Pi modules is also implemented in real-world settings to evaluate its reliability in transferring smart grid data over a wireless link. The proposed DSM system determines the optimal price corresponding to the optimum system welfare based on the two-way wireless communications among users, decision-makers, and energy providers. A novel cost function is adopted to reduce the impact of changes in user numbers on electricity prices. Simulation results indicate that the proposed system benefits users and energy providers. Furthermore, experimental results demonstrate that the success rate of data transfer significantly varies over the implemented wireless NAN, which can substantially impact the performance of the proposed DSM system. Further simulations are then carried out to quantify and analyze the impact of wireless communications on the electricity price, user welfare, and provider welfare.

A wireless-power and data-transfer using inductive RF link and ASK modulation

This paper aims to present a novel trans-cutanaeous, wireless and an efficient radio frequency (RF) inductive power and data link (IPDL) based on amplitude shift key (ASK) - modulator with an efficient ‘Class-E’– RF ‘power amplifier’ that is applicable to implantable medical devices (IMDs). The IPDL system comprises an external device placed on exterior to human skin to transmitting power and data to IMDs like implantable micro-systems (cardiac pacemakers, cochlear implants, retinal implants, deep brain stimulators) to excite and monitor respective neural and muscular system. The entire system is designed to operate with a ‘low-band-frequency’ of 4 MHz by avoiding the problem of tissue heating. A practical model for the IPDL with results is presented. Various graphs such as frequency vs primary coil/secondary coil output are plotted and shown. Typical specifications of the exterior device, namely, the modulation-index (MI) and the modulation-rate (MR) are 40% and 4.3% respectively with a data rate of 172 Kbps. The design is simulated with electronic workbench MULTISIM 12.0 and TINA Ver 9.

A model of radio scintillations in the deep Venus atmosphere: Application to the DAVINCI probe

Power fluctuations have been noted on radio signals propagating through the Venus atmosphere since the very first descent probe there (Venera 4) and have been observed as a routine feature in radio occultations, where the grazing ray geometry amplifies the effect of refractive scattering structures. Motivated by DAVINCI and other missions currently in development, a physical model of refraction variations in the Venus atmosphere is developed using the VEGA-2 high-resolution temperature profile down to the surface and other data, which suggest several distinct layers of more intense scattering. The resultant modeled radio scintillations are compared with observed scintillations and assessed for the DAVINCI relay link. High-time-resolution radio signal power measurements on the DAVINCI radio link promise to be an interesting probe of the Venus atmosphere.

High-speed GaN-based laser diode with modulation bandwidth exceeding 5 GHz for 20 Gbps visible light communication

Visible light communication (VLC) based on laser diodes demonstrates great potential for high data rate maritime, terrestrial, and aerial wireless data links. Here, we design and fabricate high-speed blue laser diodes (LDs) grown on c-plane gallium nitride (GaN) substrate. This was achieved through active region design and miniaturization toward a narrow ridge waveguide, short cavity length, and single longitudinal mode Fabry–Perot laser diode. The fabricated mini-LD has a low threshold current of 31 mA and slope efficiency of 1.02 W/A. A record modulation bandwidth of 5.9 GHz (−3 dB) was measured from the mini-LD. Using the developed mini-LD as a transmitter, the VLC link exhibits a high data transmission rate of 20.06 Gbps adopting the bit and power loading discrete multitone (DMT) modulation technique. The corresponding bit error rate is 0.003, satisfying the forward error correction standard. The demonstrated GaN-based mini-LD has significantly enhanced data transmission rates, paving the path for energy-efficient VLC systems and integrated photonics in the visible regime.

A study of the effect of array geometry on improving channel hardening in mm-Wave massive MIMO systems

The impact of array geometry on enhancing channel hardening in mm-wave massive MIMO systems is investigated. As the number of physical radio links increases, small-scale fading is averaged out, leading to a hardened channel and increased communication capacity. A comprehensive analysis is conducted using the physical ray distribution model (3GPP) to investigate the impact of various array geometries on channel hardening. A clear insight is obtained through the derivation of a closed-form relation, providing an understanding of the corresponding effect. Additionally, a novel measure called Array Spread is introduced, offering a practical tool for designing array geometry that minimizes channel variations in every specific physical scenarios. The findings of this study contribute to the overall understanding and optimization of MIMO communication systems, particularly in the context of massive MIMO deployments in mm-wave frequencies.

Performance analysis of an underwater wireless optical communication link with Lommel beam

In order to mitigate the stochastic interference of underwater channels and improve the quality of underwater communication systems, it is essential to study the performance of the underwater wireless optical communication (UWOC) links utilizing vortex beams with unique attributes. In this paper, the analytical formulae for the bit error rate (BER) and the average capacity of the UWOC link with diffraction-free Lommel beam are derived under the Rytov theory. Simulation results demonstrate that the system with a long wavelength, a high system signal-to-noise ratio(SNR), a small asymmetric parameter and receiving aperture diameter achieves a high average capacity and a low BER. Furthermore, in the underwater channel with a larger kinetic energy dissipation rate per unit mass of fluid and inner scale, a smaller mean-squared temperature dissipation rate, temperature salinity contribution ratio and transmission distance, the performance of the communication link can be improved. Meanwhile, it is found that the performance of the link with carrier Lommel beam are less sensitive to the topological charge, the scaling factor of the beam and the turbulent outer scale. These findings provide theoretical support for the design and implementation of an UWOC link utilizing the Lommel beam.

Design of TE-polarized resonant Bessel-beam launchers for wireless power transfer links in the radiative near-field region

Abstract Resonant Bessel-beam launchers (BBLs)are radiating devices constituted by a cylindrical metallic cavity with a partially reflecting sheet (PRS) on top. Millimeter-wave resonant BBLs typically exhibit transverse magnetic (TM) polarization due to the use of coaxial probes as feeders and homogenized metasurfaces as PRS. Launchers showing either a purely transverse electric (TE) or a hybrid (quasi-TE) polarization have recently been proposed for realizing wireless power transfer (WPT) links in the radiative near-field region at millimeter waves. The former are obtained by means of a radial slot array as a feeder and a homogenized metasurface as a PRS. The latter are obtained by using a loop antenna as a feeder and an annular strip grating in the homogenization limit as radiating aperture. In this work, based on an original semi-analytical model, such a metasurface is demonstrated to show a dichroic behavior. This interpretation explains the improvement in terms of polarization purity with respect to more nondichroic conventional homogenized metasurfaces. The behavior of the annular strip grating under a pure TM polarization is tested with a coaxial feeder, whereas its behavior under a pure TE polarization is tested by means of the radial slot array feeder. Results confirm the validity of the proposed analysis, which is finally exploited to evaluate the WPT performance.

Enhancing Underwater Wireless Sensor Networks With Flexible Communication and Positioning

An innovative approach centred around underwater wireless communication and positioning in Underwater Wireless Sensor Networks, addressing limited coverage by proposing a dual-hop system combining optical fiber and wireless links. Time frame design and Code Division Multiplexing Access enhance multi-user signal transmission efficiency. Proof-of-concept experiments validate feasibility, with the introduction of the hybrid fish eye routing protocol further enhancing performance by intelligently combining fish-eye routing and traditional protocols for improved coverage and reliability. Moreover, the hybrid fish eye protocol incorporates adaptive routing algorithms that dynamically adjust to changes in underwater conditions, ensuring robustness and adaptability in challenging environments. Additionally, the hybrid fish eye protocol optimizes energy consumption by minimizing unnecessary transmissions, thereby prolonging the lifespan of underwater sensor networks. With full-duplex communication, precise positioning, and an extended transmission range, convergent system demonstrates significant potential for supporting high-capacity transmission among mobile nodes in forthcoming underwater scenarios