Irradiation Tests Research Articles

A High-Throughput Neurosphere-Based Colony Formation Assay to Test Drug and Radiation Sensitivity of Different Patient-Derived Glioblastoma Lines

The gold standard assay for radiation response is the clonogenic assay, a normalized colony formation assay (CFA) that can capture a broad range of radiation-induced cell death mechanisms. Traditionally, this assay relies on two-dimensional (2D) cell culture conditions with colonies counted by fixing and staining protocols. While some groups have converted these to three-dimensional (3D) conditions, these models still utilize 2D-like media compositions containing serum that are incompatible with stem-like cell models such as brain tumor initiating cells (BTICs) that form self-aggregating spheroids in neural stem cell media. BTICs are the preferred patient-derived model system for studying glioblastoma (GBM) as they tend to better retain molecular and phenotypic characteristics of the original tumor tissue. As such, it is important that preclinical radiation studies should be adapted to BTIC conditions. In this study, we describe a series of experimental approaches for performing CFA experiments with BTIC cultures. Our results indicate that serum-free clonogenic assays are feasible for combination drug and radiation testing and may better facilitate translatability of preclinical findings.

Proton radiation damage and temperature response mechanism of CMOS image sensor for space high-precision metering

The exoplanet transit telescope uses high-precision CMOS image sensor for planet searching. This device operates at 233 K to reduce dark current and noise interference on the effective signal. This paper examines the effects of space proton radiation on the performance of high-precision CMOS image sensor through proton irradiation and post-irradiation testing at various temperatures. The results indicate that proton irradiation degrades parameters like dark current, dark signal, and fixed pattern noise, with dark current being the most sensitive. As the operating temperature increases, radiation-sensitive parameters degrade rapidly, significantly impairing sensor performance. This indicates that lower temperatures provide better performance. Notably, Dark signal distribution fluctuates with temperature. Compared to before irradiation, the Gaussian mean decreases at 233 K and increases between 243 and 273 K. At low temperature, the ionization damage caused by proton radiation mainly results in the decrease of Gaussian mean, while the displacement damage mainly results in the increase of this. The study concludes that proton-induced displacement damage, which leads to bulk defects, is the primary cause of performance degradation. This provides essential data and foundational support for radiation damage assessment and on-orbit applications.

A Study on the Radiation Resistance Performance of an Al2O3 Composite Tritium Permeation Barrier and Zirconium-Based Tritium-Absorbing Materials.

The permeation of tritium from secondary neutron source rods in nuclear power plants presents a significant and unavoidable safety concern both for internal equipment and the external environment. This study primarily explores two feasible strategies for tritium permeation barriers: coating stainless steel surfaces with tritium permeation barrier (TPB) materials and utilizing materials with excellent tritium absorption properties. Through external ion irradiation tests, a comparative analysis was conducted on the tritium permeation performance, morphology, and nanohardness changes in two tritium-resistant designs, specifically Cr2O3/Al2O3 composite coatings and a zirconium-based tritium-absorbing material under varying irradiation doses. The results indicate that both approaches exhibit exceptional radiation resistance, maintaining an effective tritium permeation reduction factor (PRF) even after irradiation.

Design of Mini-Plate-1 Irradiation Test for Qualification of High-Density, Low-Enriched U-10Mo Monolithic Fuel

Design of Mini-Plate-1 Irradiation Test for Qualification of High-Density, Low-Enriched U-10Mo Monolithic Fuel

Evaluation method of carbon-fiber-reinforced polymer material anti-radiation performance based on synergistic effect model

Aiming at the high computational costs of the current multi-source X-ray radiation numerical simulations, a multi-source X-ray evaluation method based on a synergistic effect model is studied. First, based on the advantage of the low computational cost of single-source X-ray radiation numerical simulations, a hierarchical Gaussian process model is used to construct a superimposed single-source numerical simulation data fusion model. Second, by constructing composite correlation functions, the data fusion ability of the Gaussian process model is improved. The unknown parameters in the data fusion evaluation model are solved with the help of the Markov chain Monte Carlo method and a nonlinear optimization algorithm. Based on the obtained sampling values of the unknown parameters, an approximate solution method for the estimated value of the superimposed single-source X-ray radiation numerical simulations with unknown input conditions is given. Then a synergistic effect model is constructed based on the established linear regression surrogate model. The synergistic evaluation of multi-source X-ray radiation tests based on single-source X-ray radiation numerical simulation superimposed test data is studied. Finally, carbon-fiber-reinforced polymer experiments show the proposed method in better than existing Kriging methods, for prediction of multi-source X-ray radiation data.

Small punch test size reduction to enable high flux irradiation

Screening and qualification of new nuclear materials with superior irradiation resistance requires expensive irradiation exposure and post-irradiation examination before consideration into industrial nuclear structural components. The development of miniaturized test methods is needed for enhanced cost/time efficient testing, while enabling comparative and robust material property estimation in a timely and high throughput manner. The Small Punch Test (SPT) is drawing much interest, especially since the publication of an European standard. Motivated by this standard, a new SP test sample geometry is proposed in order to reduce the material volume to be tested, hences increasing the number of samples that can be introduced in an irradiation rig. The modified sample diameter has been reduced from 8 to 5.35 mm. The qualification of this new design is described here together with a detailed description of the SPT setup modification as compared to the reference setup of the EN standard. Finite element analyses and a series of experiments have been conducted using both standard and reduced size SP samples to demonstrate that the modified test gives estimates of the basic mechanical properties with the same magnitude of error and validates the modified sample geometry for usage in irradiated material testing.

Catalytic methanol cracking to hydrogen and formaldehyde over heterogeneous catalysts by radiolysis: Sectoral industrial symbiosis by waste radiation utilisation

In order to create a sustainable, carbon-neutral society, it is of utmost importance to link the energy sector with the chemical industry. Radiation from nuclear power plants proves to be useful for H2 production from water or carriers such as methanol. In our study, we investigated the potential for the production of hydrogen and formaldehyde by endothermic radiolytic cracking of 50 mol% aqueous methanol, which can be produced by direct CO2 hydrogenation without distillation. We developed an elegant experimental setup and performed irradiation tests in the TRIGA reactor with system analysis by GC-MS (gas chromatography with mass spectroscopy), SEM-EDS (scanning electron microscopy with energy dispersive spectroscopy), XRD (X-ray powder diffraction) and Monte Carlo simulations of radiation absorption. Among the different routes tested, a semiconductor-based photocatalytic material (TiO2) increased the H2 yield by 24%. In the critical evaluation of radiation utilisation, spent fuel radiation sources were found to be promising as they require low heat exchange and could produce 3600 kg H2/day in a single spent fuel pool. The advantage of radiolytic methanol cracking lies in its ability to produce formaldehyde and hydrogen (∼53% methanol value increase), whereas conventional partial oxidation of methanol with O2 for formaldehyde production (only ∼31% methanol value increase) inevitably produces water, which reduces the overall energy efficiency.

Interaction of Polymethyl Methacrylate with Boehmite-Filmed Aluminum Cladding Under Gamma Irradiation

This paper presents an overview of ongoing work to qualify the Advanced Test Reactor (ATR) driver fuel elements that have been affected by irradiation-degraded polymethyl methacrylate (PMMA) flux wands. Irradiation testing was performed on PMMA material in contact with aluminum clad material. The cladding was prefilmed with a boehmite oxide layer, an important feature of the ATR driver fuel. The effects on the boehmite layer due to gamma irradiation of the PMMA-aluminum clad system were investigated. PMMA embrittlement, followed by softening and degradation, occurred at high radiation levels. Adhesion between the cladding and irradiated PMMA was observed. Flow testing at prototypic ATR flow rates demonstrated the effective removal of the adhered material. Measurements of the boehmite layer thickness were performed, and Raman spectroscopy was utilized to detect the presence of boehmite in the irradiated PMMA material.

Study on fuel management strategy for accident-tolerant fuel on in-pile irradiation test

Within the context of the long-term development plan of batch loading of accident-tolerant fuel assemblies, an equivalent physical model of lead test assemblies is established based on the requirements of radiation testing and the applicability of analysis software. The quantitative assessment has been conducted on the impacts of parameters including zirconium alloy cladding coating and pellet additives on reactivity of fuel assembly. Concurrently, the fuel management strategy is optimized in alignment with the irradiation test objectives of ATF assemblies, leading to the creation of an evaluation process tailored for ATF assembly loading pattern. Focusing on the irradiation of the lead test assemblies into a nuclear power plant in China, three-cycle nuclear reactor loading pattern are designed, which are taking into account the economic, safety, and irradiation testing goals of the nuclear power plant. Simultaneously, the neutronic characteristics are also evaluated, quantitatively. The results show that the established equivalent physical model can effectively represent the characteristics of the lead test assemblies. The loading patterns designed based on the Optimised fuel management strategy achieve the desired goals in terms of economy, safety and radiation test requirements. The designed loading pattern evaluation process and equivalent model analysis method in this work provide guidance for the subsequent engineering design and application of irradiation testing for lead test assemblies.

Beams of electrons, gammas and fast neutrons at BINP

An overview of test beam facilities at Budker Institute of Nuclear Physics (BINP) is presented. Facility for generation of extracted beams of electrons was designed at BINP for testing of detector prototypes in HEP field. The electron beam energy is from 100[Formula: see text]MeV to 3.5[Formula: see text]GeV. Since 2011, the facility has been used successfully for testing various detector prototypes. On the base of VEPP–4M collider, it is possible to obtain gamma beams too. The energy scale and resolution of calorimeters can be calibrated using edges of Compton and bremsstrahlung spectra. A facility for boron–neutron capture therapy (BNCT) was upgraded to perform radiation tests with fast neutrons with the integral flux up to [Formula: see text][Formula: see text]n/cm2. In 2022, the experiment on the study of the radiation hardness of optical fibers for the laser calibration system of electromagnetic calorimeter and the CMS detector was carried out. It has been demonstrated for the first time that at the BINP it is possible to operate with such doses. It could be further used for the wide range of radiation test tasks related with the development of facilities for HEP.

Microstructure evolution mechanism of WB-doped Fe-based amorphous composite coating under proton beam irradiation

Fe-based amorphous coatings exhibit exceptional irradiation resistance attributed to their distinct topologically disordered structure, rendering them highly attractive for advanced nuclear energy applications. The incorporation of WB secondary phase doping can notably alter the coating to enhance its operational safety. In this investigation, three different Fe-based composite coatings, with varying WB doping levels of 5 %, 10 %, and 15 % were fabricated through the High-Velocity Oxy-Fuel (HVOF) spraying technique. Irradiation tests were conducted at room temperature utilizing a proton beam with an energy of 1.52 MeV to simulate neutron irradiation environment in a nuclear reactor. The microstructure evolution before and after irradiation was systematically investigated with XRD, SEM, and TEM techniques. The results demonstrated that proton irradiation induced free volume, crystallization and H bubbles evolution. The doping of WB diminished the proton implantation dose threshold for segregation in irradiation plateaus while enhancing the growth of precipitates around the damage zone by inducing the production of M23C6 carbides and, at the same time, increasing the probability of H bubble nucleation and growth. These findings provide insights for iterative updates in Fe-based amorphous materials, informing their further development and application.

Advances of the Holographic Technique to Test the Basic Properties of the Thin-Film Organics: Refractivity Change and Novel Mechanism of the Nonlinear Attenuation Prediction.

A large number of the thin-film organic structures (polyimides, 2-cyclooctylarnino-5-nitropyridine, N-(4-nitrophenyl)-(L)-prolinol, 2-(n-Prolinol)-5-nitropyridine) sensitized with the different types of the nano-objects (fullerenes, carbon nanotubes, quantum dots, shungites, reduced graphene oxides) are presented, which are studied using the holographic technique under the Raman-Nath diffraction conditions. Pulsed laser irradiation testing of these materials predicts a dramatic increase of the laser-induced refractive index, which is in several orders of the magnitude greater compared to pure materials. The estimated nonlinear refraction coefficients and the cubic nonlinearities for the materials studied are close to or larger than those known for volumetric inorganic crystals. The role of the intermolecular charge transfer complex formation is considered as the essential in the refractivity increase in nano-objects-doped organics. As a new idea, the shift of charge from the intramolecular donor fragment to the intermolecular acceptors can be proposed as the development of Janus particles. The energy losses via diffraction are considered as an additional mechanism to explain the nonlinear attenuation of the laser beam.

Advanced Electrospun Composites Based on Polycaprolactone Fibers Loaded with Micronized Tungsten Powders for Radiation Shielding.

Exposure to high levels of radiation can cause acute, long-term health effects, such as acute radiation syndrome, cancer, and cardiovascular disease. This is an important occupational hazard in different fields, such as the aerospace and healthcare industry, as well as a crucial burden to overcome to boost space applications and exploration. Protective bulky equipment made of heavy metals is not suitable for many advanced purporses, such as mobile devices, wearable shields, and manned spacecrafts. In the latter case, the in-space manufacturing of protective shields is highly desirable and remains an unmet need. Composites made of polymers and high atomic number fillers are potential means for radiation protection due to their low weight, good flexibility, and good processability. In the present work, we developed electrospun composites based on polycaprolactone (polymer matrix) and tungsten powder for application as shielding materials. Electrospinning is a versatile technology that is easily scalable at an industrial level and allows obtaining very lightweight, flexible sheet materials for wearables. By controlling tungsten powder size, we engineered homogeneous, stable and processable suspensions to fabricate radiation composite shielding sheets. The shielding capability was assessed by an in vivo model on prototype composite sheets containing 80 w% of W filler in a polycaprolactone (PCL) fibrous matrix by means of irradiation tests (X-rays) on mice. The obtained results are promising; as expected, the shielding effectivity of the developed composite material increases with the thickness/number of stacked layers. It is worth noting that a thin barrier consisting of 24 layers of the innovative shielding material reduces the extent of apoptosis by 1.5 times compared to the non-shielded mice.

Modeling and design of a separate effects irradiation test targeting fission gas release from Cr-doped UO2

Fission gas release (FGR) from nuclear fuel during operation can diminish heat transfer properties across the pellet-cladding gap and increase the fuel rod internal pressure, thereby posing a concern to fuel reliability and safety during an accident. Enlarging the fuel grain size, which has been shown to improve fission gas retention, can be achieved by doping the fuel feedstock prior to sintering. In this work, the BISON fuel performance code was used to predict FGR from undoped and chromia-doped UO2 (referred to as Cr-doped UO2) fuel specimens with different grain sizes and across various temperatures. The BISON models identified the irradiation conditions for which FGR is most significant, and a separate effects irradiation experiment in the High Flux Isotope Reactor (HFIR) was then developed targeting those conditions. The experiment leveraged the MiniFuel irradiation capability at Oak Ridge National Laboratory and consisted of 12 fuel specimens of varying grain size and Cr content. A coupling scheme between BISON FGR results and the ANSYS finite element thermal model used for experiment design was formulated to predict cumulative FGR from each fuel specimen based on expected irradiation temperature histories. The fuel samples were fabricated and characterized as a part of this work, and the fuel compositions modeled in BISON were representative of the specimens used in the experiment. This combined modeling and experimental effort aims to study the effect of fuel grain size and Cr content on FGR and to provide simulated BISON FGR results that can be used for future model validation activities.

Performances of halide scintillators for the dosimetry based on gamma-ray spectrometry for environmental monitoring systems

High pressure ion chambers (HPIC) and NaI(Tl) scintillation detectors are widely used to monitor the ambient dose equivalent rate H*(10) within and around the Korean nuclear facilities. However, HPIC cannot provide spectrometric information and NaI(Tl) detector is limited in identifying nuclides, such as 131I, 134Cs, and 137Cs, released from nuclear facilities owing to its insufficient energy resolution. This study employed four halide scintillators – LaBr3(Ce), CeBr3, and SrI2(Eu) – to measure the ambient dose equivalent rate and detect gamma nuclides from measured energy spectrum. First, the pulse–shaping time in the signal processing unit was optimized for each scintillator. Second, energy resolution and counting efficiency were estimated for 137Cs and 60Co. Finally, an irradiation test was performed to estimate the dose rate. Based on these results, LaBr3(Ce) and NaI(Tl) were selected as in situ gamma spectrometry system for measuring environmental radiation, and field experiments were conducted near the Fukushima Daiichi nuclear power plant to measure the dose rate.

Photobleaching Effect on the Sensitivity Calibration at 638 nm of a Phosphorus-Doped Single-Mode Optical Fiber Dosimeter.

We investigated the influence of the photobleaching (PB) effect on the dosimetry performances of a phosphosilicate single-mode optical fiber (core diameter of 6.6 µm) operated at 638 nm, within the framework of the LUMINA project. Different irradiation tests were performed under ~40 keV mean energy fluence X-rays at a 530 µ Gy(SiO2)/s dose rate to measure in situ the radiation-induced attenuation (RIA) growth and decay kinetics while injecting a 638 nm laser diode source with powers varying from 500 nW to 1 mW. For injected continuous power values under 1 µW, we did not measure any relevant influence of the photobleaching effect on the fiber radiation sensitivity coefficient of ~140 dB km-1 Gy-1 up to ~30 Gy. Above 1 µW, the fiber radiation sensitivity is significantly reduced due to the PB associated with the signal and can decrease to ~80 dB km-1 Gy-1 at 1 mW, strongly affecting the capability of this fiber to serve as a dosimeter-sensitive element. Higher power values up to 50 µW can still be used by properly choosing a pulsed regime with periodic injection cycles to reduce the PB efficiency and maintain the dosimetry properties. Basing on the acquired data, a simple model of the photobleaching effect on a coil of the investigated fiber is proposed in order to estimate its sensitivity coefficient evolution as a function of the cumulated dose and its fiber length when injecting a certain laser power. Additional studies need to investigate the influence of the temperature and the dose rate on the PB effects since these parameters were fixed during all the reported acquisitions.

The Impact of Gamma Irradiation on 4H-SiC Bipolar Junction Inverters under Various Biasing Conditions

In this study, we introduce the impact of gamma irradiation on 4H-SiC based transistor-transistor logic (TTL) inverters. These monolithic bipolar inverters have been successfully demonstrated in a broad spectrum of temperature and supply voltage conditions. In this iteration of experiments, attempts made to the processing to increase beta values. The gamma radiation tests from a 60Co source were conducted under various operation conditions and measured in-situ under different biasing conditions. The Silicon Carbide Integrated circuits ( SiC ICs) show excellent tolerance properties to gamma radiation up to doses of nearly 1 MRad. Comparable Si BJT-based TTL inverters show considerable degradation already at one order of magnitude lower doses, clearly demonstrating the superior radiation hardness of 4H-SiC ICs.

250 μm Thick Detectors for Neutron Detection: Design, Electrical Characteristics, and Detector Performances

Solid State Detectors (SSD) are crucial for fast neutron detection and spectroscopy in tokamaks due to their solid structure, neutron-gamma discrimination, and magnetic field resistance. They provide high energy resolutions without external conversion stages, enabling compact array installations in the harsh environment of a tokamak. Research comparing diamond and 4H-SiC detectors highlights thickness as a key efficiency factor. A 250 μm SiC epilayer with low doping, grown using a high-growth-rate process, exhibits sharp interfaces and minimal defects, essential for neutron detectors. The study evaluates detector designs, and performance using a 4H-SiC substrate. Various detector designs, such as Schottky diodes and p/n diodes, are assessed via I-V and C-V measurements, addressing high depletion voltage challenges. Preliminary neutron irradiation tests validate detector functionality, energy resolution and confirming detector reliability.

Towards fiber-reinforced front-sheets for lightweight PV modules in VIPV

Novel approaches in the field of photovoltaics, such as building or vehicle integration require investigations of lightweight PV module concepts [1]. This research proposes and evaluates a lightweight PV module concept using glass fiber-reinforced polymers (GFRP) based on epoxy composites within the module stack. The usage of GFRP as front material as proposed in this work, reduces weight by 44–74 % compared to conventional glass-back sheet modules. We show results that with the proposed module stack hail impact resistant module can be built with small and large size avoiding any cell cracks after impact. Additionally, modules with GFRP front layer withstand thermal cycling tests with low power losses ranging from −0.9 % to −1.1 % at Pmpp depending on the individual GFRP layer. We also show results of cut susceptibility tests with an increased performance compared to modules with a polymeric front layer. Development topics remain as shown by damp-heat and UV irradiation testing, were an optimization of the module stack still needs to be performed.

Microbial contamination of spittoons and germicidal effect of irradiation with krypton chloride excimer lamps (Far UV-C 222 nm).

In dentistry, instruments, appliances, and body fluids such as saliva or blood are possible sources of infection. Although conventional antiseptic procedures effectively prevent infection, spittoons cannot be sanitized between each treated patient and are usually washed only with running water. However, there is currently no fast and efficient disinfection method that can be implemented between treatments. An optically filtered krypton chloride excimer lamp using ultraviolet light (Far UV-C) in the 200-230 nm wavelength range (innocuous to humans) has been recently used as a virus- and bacteria-inactivating technology. This study aimed to identify the bioburden of a dental spittoon and examine the susceptibility of two oral Streptococcus and two Enterococci to 222-nm Far UV-C by irradiating the spittoon with 222 nm Far UV-C for 5 min before evaluating the disinfection effect. Bacterial analysis and real-time polymerase-chain reaction testing was used to confirm the spittoon's biological contamination. Bacterial susceptibility to a 222-nm Far UV-C was determined with a graded dose irradiation test. After each treatment, the spittoon was irradiated with 222-nm Far UV-C for 5 min, and the disinfecting effect was evaluated. Microbial analysis of the spittoon's surface was performed using the Silva database. We found that > 97% of the microbes consisted of six bacterial phyla, whereas no viruses were found. Pseudomonas aeruginosa was frequently detected. The 1-log reduction value of two oral-derived Streptococci and two Enterococci species at 222-nm Far UV-C was 4.5-7.3 mJ/cm2. Exposure of the spittoon to 222-nm Far UV-C at 3.6-13.5 mJ/cm2 significantly decreased bacterial counts (p < 0.001). Irradiation with 222-nm Far UV-C at 3.6-13.5 mJ/cm2 significantly eliminates bacteria in spittoons, even when they are only rinsed with water. Hence, 222-nm Far UV-C irradiation may inhibit the risk of bacterial transmission from droplets in sink surfaces.